Westinghouse Digital Electronics

LTV-30w2 LCD TV

QUICK CONNECT GUIDE
CONGRATULATIONS on purchasing a state of the art LCD TV! This Quick Connect Guide will help you get started in 3 easy steps. On the back you will find information to maximize your LCD TV experience. For complete installation, usage instructions, and safety precautions please refer to the Users Manual.

KEYPAD POWER INDICATOR

CONNECT THE POWER
Use enclosed A/C power cable to connect A/C power to Main Power input on the LCD TV connection panel. The power indicator on the front side of the TV will glow orange. Note: When TV is turned on, the indicator will glow blue.

CONNECT THE TUNER

Connect either an analog cable or a TV antenna wire to the cable ready NTSC tuner input labeled RFI located in the left area of the connection panel. Note: This step can be skipped if you do not use these options.

CONNECT A DVD PLAYER

Connect your DVD player to the component YPbPr input and corresponding audio inputs located in the connection panel.
Turn on the power by pressing the Power button on the keypad. To watch TV, run the Auto Scan menu option (listed under the TV section in the menu system) to search for available channels.
www.wes tinghous edigital.com

TV Input (RF-input)

YPbPr 1 Input
YPbPr 2 Input Audio 1 Input Audio 2 Input
MAXIMIZE YOUR LCD TV EXPERIENCE

Audio Input

Audio Output
You can attach your LCD TV to a variety of electronic devices including a digital cable or satellite set top box, a game console, a VCR, or a computer. The charts show our recommendations for the best quality picture with these commonly used devices. If you have trouble connecting these or other devices, please refer to the Users Manual.

Monitor

2004 Westinghouse Digital Electronics, LLC. All rights reserved. Specifications subject to change without notice. , Westinghouse and You can be sure. if it's Westinghouse are trademarks of Westinghouse Electric Corporation and are used under license. MA-PS-0110-0401

S-Video Input

AV Video Input

DVI Audio Input

RGB Audio IN

RGB IN

TYPICAL SETUP
True HDTV picture quality using YPbPr Non-progressive scan DVD players with YCbCr (480i only) Game console action using AV VCR viewing and editing with S-Video

VIDEO INPUTS

DID YOU KNOW THAT YOUR LCD TV ALSO HAS:
Picture-in-Picture Preferred channels settings with optional parental controls Wide screen viewing

TV Tuner

HDTV Digital Cable/ Satellite Receiver DVD Player Game Console VCR Good

PC INPUTS

S-Video

Better Better

YCbCr 480i only

Best Best

Good Good Good Good Good
CHECK OUT www.westinghousedigital.com for our: Versatile Wall Mounting options Designer Art Frames with Acoustical Mattes

Better Better Best

RGB (VGA) Good

DVI Best

Set computer resolution to 1280 x 768 Computer monitor and TV Picture-In-Picture!
Use the Source button on the remote control or keypad to cycle between the different inputs, or select the source directly using the remote control buttons TV, S-Video, AV, PC, DVI, or HDTV.
www.wes tinghous edigita l. c o m

UFP-420

UFP-420 INSTALLATION INSTRUCTIONS
Mounting Bracket (Qty 1) NOTE:
Westinghouse (LTV-30W2) M4 x 20mm Phillips Head Screws (Qty 4); M4 Flat Washer (Qty 4); Flat Washer (Qty 16) ViewSonic (N325W) M6 x 20mm Phillips Head Screws (Qty 4); Flat Washer (Qty 16) Sony (KDLV40XBR1) M5 x 16mm Phillips Head Screws (Qty 4)

1. 2. 3. 4. 5.

For the Westinghouse and Viewsonic displays, the following spacers must be used: Westinghouse One M4 Flat Washer must be used with each screw (between the screw and the adapter plate) for a total of four M4 Flat Washers. Four flat washers must be placed between the adapter plate and the display (four per screw; sixteen total). ViewSonic Four flat washers must be placed between the adapter plate and the display (four per screw; sixteen total). Invert the flat panel display and place it on a soft, flat surface. Locate the four (4) mounting points that are found on the back of the flat panel display (Figure 1). Align the UFP-420 to the flat panel display mounting points. Use the four (4) M4 x 20mm Phillips head screws to secure the UFP-420 to the flat panel display (Figure 2). Be sure to place the nylon washer between the bracket and the display. Do not overtighten. Mount the flat panel display to the LCD mount that was purchased, following the supplied instructions.

Mounting Point

Figure 1

Page - 1 -

Installation Instructions
M4 x 20mm Phillips Head Screws

Nylon Washer

Display

Figure 2

Page - 2 -