Reviews & Opinions
Independent and trusted. Read before buy Whirlpool Built-IN Trim KIT!

Whirlpool Built-IN Trim KIT Manual

Download (English)
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.


Whirlpool Built-IN Trim KITAbout Whirlpool Built-IN Trim KIT
Here you can find all about Whirlpool Built-IN Trim KIT like manual and other informations. For example: review.

Whirlpool Built-IN Trim KIT manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Whirlpool Built-IN Trim KIT please write about it to help other people.
[ Report abuse or wrong photo | Share your Whirlpool Built-IN Trim KIT photo ]

User reviews and opinions

Comments to date: 5. Page 1 of 1. Average Rating:
formyle 8:56am on Wednesday, August 11th, 2010 
It seems to work pretty well. When I test it under Linux using the smartctl program. So far it works fine, however I noticed that it is not as quiet as the other disk I had before
OOoWP 11:35am on Tuesday, August 3rd, 2010 
I got this drive to replace a slow 5400 rpm Seagate drive and is amazed at the screaming performance and its quietness. Good choice to have for a laptop, upgraded an old Hitachi Deskstar for this drive, and great difference in speed.
elusivespoon 10:57am on Friday, July 23rd, 2010 
Loading proceeded without a hitch. Easy To Install,Fast,Quiet It is a good one if you use it w/ only Windows. But if you want to use both MAC & Windows it gets kinda difficult.
paj1234 12:40pm on Wednesday, July 14th, 2010 
Somewhat Satisfied After two years, this drive finally went South on me. I wish hard drives were not so short lived. I guess two years is not so bad. Garbage item Only used about one month and it was broken. I had to back up data, reinstall OS and exchange the item with WD.
penguin07 8:40pm on Tuesday, July 6th, 2010 
Fast, quiet, and totally reliable. Not a single one. Has not given me ANY problems. Fast, stable, reliable. You need a very good quiet fan Never installed. Glad I didnt. Terrible service

Comments posted on are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.




Built-In Trim Kit Models MK1207XS, MK1200XS
UL listed for use over built-in electric ovens: 27" (68.6 cm): (Y)RBS275PD, (Y)GBS277PD, KEBI171D, (Y)KEBS177D 30" (76.2 cm): (Y)RBS305PD, GBS307PD, (Y)KEBI101D, (Y)KEBS107D
Garniture pour modles MK1207XS, MK1200XS
Homologations UL pour utilisation au-dessus des fours encastrs lectriques : 27" (68,6 cm) : (Y)RBS275PD, (Y)GBS277PD, KEBI171D, (Y)KEBS177D 30" (76,2 cm) : (Y)RBS305PD, GBS307PD, (Y)KEBI101D, (Y)KEBS107D
Table of Contents / Table des matires
MICROWAVE OVEN SAFETY.. 1 INSTALLATION INSTRUCTIONS.. 2 Tools and Parts... 2 Minimum Cutout Dimensions.. 2 Trim Kit Frame Dimensions.. 2 Electrical Requirements.. 2 Microwave Oven Preparation.. 3 Bottom Duct Assembly... 3 Side Duct and Upper Duct Assembly. 3 Anti-Tip Bracket Installation... 4 Microwave Oven Placement.. 4 Trim Kit Frame Installation... 4 SCURIT DU FOUR MICRO-ONDES.. 5 INSTRUCTIONS D'INSTALLATION... 5 Outillage et pices... 5 Dimensions minimales pour le dcoupage.. 5 Dimensions pour cadre de garniture.. 6 Spcifications lectriques... 6 Prparation du four micro-ondes.. 6 Assemblage du conduit infrieur... 6 Assemblage du conduit latral et du conduit suprieur. 7 Installation de la bride antibasculement.. 7 Mise en place du four micro-ondes... 8 Installation du cadre de garniture... 8


Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word DANGER or WARNING. These words mean:


You can be killed or seriously injured if you don't immediately follow instructions. You can be killed or seriously injured if you don't follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.



Tools and Parts

Tools Needed
Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.
OVER 27" (68.6 CM) BUILT-IN OVEN Depth Width
21" (53.34 cm) min. with flush mount receptacle; 22" (57.79 cm) min. without flush mount receptacle 25" (64.77 cm) 25" (64.77 cm) min; 28" (72.39 cm) max.
Measuring tape Pencil Scissors
Phillips screwdriver 5/64" drill
Trim Kit Frame Dimensions
26" (6 8.2 cm)* 29" (7 5.9 cm)* *

Parts Supplied

19" (48.7 cm)

13" (33.0 cm)

24" (6 1.3 cm)
*For installation over 27" (68.6 cm) built-in oven **For installation over 30" (76.2 cm) built-in oven

" (2.1 cm)

Electrical Requirements


A. Trim kit frame B. Side duct (1) C. Upper duct (1) D. Bottom duct (1) E. Template
F. 1" screws (4, plus 2 extra) G. 1/2" screws (11, plus 2 extra) H. Anti-tip bracket (1) I. Bottom bracket (1)
Electrical Shock Hazard Plug into a grounded 3 prong outlet.
Minimum Cutout Dimensions
Do not remove ground prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock.

16" (42.55 cm)

Observe all governing codes and ordinances. Required: A 120 Volt, 60 Hz, AC only, 15- or 20-amp electrical supply with a fuse or circuit breaker.

3" (7.6 cm)

A. Depth B. Width
Recommended: A time-delay fuse or time-delay circuit breaker. A separate circuit serving only this microwave oven.
Side Duct and Upper Duct Assembly
Connect side duct to upper duct:
1. Insert projecting tabs of upper duct into holes of side duct. 2. Bend tabs upward.


For all cord connected appliances: The microwave oven must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current. The microwave oven is equipped with a cord having a grounding wire with a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded.

WARNING: Improper use of the grounding plug can result in a risk of electric shock. Consult a qualified electrician or serviceman if the grounding instructions are not completely understood, or if doubt exists as to whether the microwave oven is properly grounded.
Do not use an extension cord. If the power supply cord is too short, have a qualified electrician or serviceman install an outlet near the microwave oven.
A. Tabs of upper duct B. Holes in side duct
Attach duct assembly to microwave oven:
NOTE: Remove any dirt or oil on microwave oven surface before ducts are attached. 1. Peel off backing of double-sided tape. 2. Align the duct assembly screw hole to the existing screw hole on left side of microwave oven, and attach the duct assembly to the microwave oven. 3. Press down firmly on ducts, then fasten with existing screw.


Microwave Oven Preparation
1. Unplug microwave oven before proceeding with installation. 2. Remove any loose items inside microwave oven.

Bottom Duct Assembly

1. Fasten bottom bracket to bottom duct using two 1/2" screws.
(Rear view of bottom duct)
A. Bottom bracket B. 1/2" screws (2) A. Existing screw
2. Remove 1 existing screw from left side of microwave oven. 3. Install bottom duct with two 1/2" screws to back of microwave oven, and two 1/2" screws to bottom of microwave oven.
(Front view of microwave oven)

A. 1/2" screws (4)

Anti-Tip Bracket Installation
1. On cutout floor, use template to mark hole centers for anti-tip bracket. Be sure to align the center line of template to center line of cutout floor.
4. Drill pilot holes through positioning flange. (Use 5/64" drill.) Then install three 1/2" screws at front of bottom duct.
4" (10.8 cm) 3" (7.6 cm)
A. Cutout opening B. Positioning flange C. 1/2" screws

18" (46.2 cm)

Trim Kit Frame Installation
A. Cutout opening B. Center line C. Cutout floor
2. Drill 2 holes for anti-tip bracket. (Use 5/64" drill.) 3. Install anti-tip bracket onto cutout floor using two 1/2" screws.
A. Mounting hole B. Pilot hole
C. 1" screw D. Trim kit frame



Server PPV-20 SGH-D807 DSC-W85 Smartst 2005 PSW110 Office 1100 RT-37LZ30 Doro 5045 CBM-1000 II PSC 950 Concept 30 RS261mdwp Yamaha MW12 LE40B750u1P SX4882 Er-380 MRD-M605 CS 174 LE32A437t2D ACD-21 II Plus STA-800 VSX-AX4avi-S 5 3 DVP-S7000 LA-EA1 Lifestyle 20 HR2470 - 2003 TCP54S2 DEC16 RX-V361 Activity 2600 Iriver N10 DVD-HR730 MB-23 Graffiti HS-51 XR-C223 CDE-9871R KX-TG2770 Spad-502 W595S Review Elna 686 PPC6601KIT KX-TG1313EG Lowrance X-40 DR-2050C MG10-2 NV-GS50EN WJ-HD500 Madness III NV-MX500 Mini 3 Fd-460A FX-82LB Servers Grandma CH605 Model 1885 EN8400 HP-302 Majesty250-2002 DAV-DZ120K TR-7930 X8350 GZ-MG645 BH-800 SB-80DX PDC-700 DVD-HR753 Hp 300 NAD T744 MAC 738 XM-255EX BDP-S360 S09AM S41G VKR6853 Plantronics T20 DGS3100 UX-F20CL 605-1 J2050 VR600-02 AH4021 SL-PG560A HK6800 B-BOX Fishfinder DMR-E100H LS-R126CEL Ihome IP99 MC-805GLR TT1650 RX-5052SB ITD 5510 CK-1W TS-H1302 20FF RSC


manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding



1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101