Reviews & Opinions
Independent and trusted. Read before buy Whistler 1732!

Whistler 1732 Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Whistler 1732, size: 191 KB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.


Whistler 1732Whistler DE1732C LED Display Radar Detector
Full Feature With POP Detection Radar Detector

Part Number: DE1732C
UPC: 052303403804

Here you can find all about Whistler 1732, for example manual and radar detector. You can also write a review.
[ Report abuse or wrong photo | Share your Whistler 1732 photo ]

User reviews and opinions

No opinions have been provided. Be the first and add a new opinion/review.





1710/1730/1732 1733/1734

To t a l B a n d P ro t e c t i o n

Dear Whistler Owner,

If you have questions concerning the operation of this Whistler product please call: CuSTOmer SeRVICE
Monday - Friday 8:00 am - 5:00 pm CT

Note: Your warranty period begins at the time of purchase. The warranty is validated only by the dated store receipt! Now is the time to record the serial number of the unit in the space provided in the warranty section of the manual.


The Whistler Group Corporate Headquarters
1201 N. Dixieland Rd. Rogers, AR 72756 Customer Service Tel 800.531.N. Walton Blvd. Bentonville, AR 72712 Tel 479.273.6012 Fax 479.273.2927
Whistler Customer Return Center
P/N 203290, Whistler 2006
Please keep the receipt in a safe place. You may register your product online at For warranty verification purposes, a copy of your dated store receipt must still accompany any unit sent in for warranty work. If the unit is returned without a dated store receipt an out of warranty service charge applies.

or visit our website

Enjoy your Whistler and please drive safely. Sincerely, The Whistler Group, Inc.
To fully acquaint yourself with the operation of your Whistler and to better understand the differences between detecting radar, laser and safety radar signals, we recommend reading this entire manual or visit our FAQ page on our website


Model Features Summary.. 3 - 6 Installation.. 7 - 8
Mounting Guidelines Windshield Mounting Power Connection And Fuse Replacement Power On And Self-Test Audio Level Adjustment Feature Engaged Confirmation Self Test Mute Setting Saver Auto Quiet Mode Quiet Mode City/City 1/City 2 Modes Highway Mode Dim/Dark Modes Engaging/Disengaging VG-2 Detection Vehicle Battery Saver Mode Stay Alert Radar Audio/Visual Alerts Laser Tips Pulse Protection Safety Warning System Total Band Protection 8


8 11a Features of 1710 All Band LED Display City Mode 5 Alert Strength Safety Warning System Alert Priority 17


Features of 1733 Total Band Protection ICON Display 360 Protection VG-2 Cloaking City Mode 17 12

Operation.. 8 - 12

Laser & Radar Alerts.. 13 - 14
VG-2 Alerts.. 15 Troubleshooting Guide.. 16 - 17
Care & Maintenance FCC Information

1730/1732 FEATURES

Whistler 17
Quiet/Auto Quiet Mode Vehicle Battery Saver Safety Warning System Alert Priority


Are Detectors Legal?... 18
Radar Facts Laser Facts Other Speed Detection Systems

8 11a 12

Speed Facts.. 19 - 21
Warranty Information.. 22 - 24 Specifications... 25 Accessories.. 26

20 - 21

Whistler 1732
Features of 1730/1732 Total Band Protection LED Display 360 Protection VG-2 Cloaking City Mode Quiet/Auto Quiet Mode 22 Vehicle Battery Saver Safety Warning System Alert Priority 12
Features of 1734 Total Band Protection 7 Segment Icon Display 360 Protection VG-2 Cloaking 3 City Modes Quiet/Auto Quiet Mode
Dim/Dark Mode Stay Alert Setting Saver Vehicle Battery Saver Safety Warning System Alert Priority


Whistlers ergonomic and user-friendly design provides a new level of operating convenience. Special features include: Note: Not all units have all features listed. 1. Bracket Release Button Provides quick and easy release of the mounting bracket. 2. Speaker Provides distinct audio warnings for X, K, Ka band radar, safety radar, laser and VG-2. 3. Mounting Bracket Location Slot holds mounting bracket firmly. 4. Radar Antenna Compact, high-efficiency antenna receives radar signals. 5. Front Laser Antenna High gain optical lens provides increased sensitivity and field of view for leading-edge laser detection. 6. Rear Laser Antenna An integrated optical waveguide provides superior detection of laser signals transmitted from behind. 7. City Button - Reduces the annoyance of false alerts typically encountered in urban driving areas. 8. Quiet/Menu Button - Pressing QUIET before a signal is detected engages Auto Quiet Mode which automatically reduces the audio level after the initial warning to a low audio level setting. Pressing QUIET during a radar/laser encounter silences audio alerts, while allowing visual alerts to keep you informed. Pressing and holding for 2 seconds allows you to select VG-2 on/off. 1733 & 1734 only (see page 15). 9. Power / Volume Control Turns unit on/off and adjusts audio level. Power/Dim Dark (1734 Only) - Turns unit on/off and engages Dim/Dark modes press and hold for 2 seconds). 10. Volume Up/Down Buttons Adjust volume up or down. 5

11. Icon Display - offers easy-to-read display to indicate power, city mode, radar band idetification, and signal strength. 11a. LED Display - multiple indicator lights help you determine the radar source and your distance from it. 11b. 7 Segment Icon Display (1734 only) combines icon display with a 7 segment digital display that shows signal strength indication and band identification. 12. VG-2/Laser Indicator Shows the unit is receiving VG-2 or laser signals. 13. X-band Indicator - Shows the unit is receiving an X-band signal. 14. K-band Indicator - shows the unit is receiving a K-band signal. 15. Ka-band Indicator - Shows the unit is receiving a Ka-band signal. 16. H - Unit is in Highway mode. 17. C - City Indicator - Shows that the unit is operating in city mode. 18. Signal Strength Indicator - Shows the strength of the signal being detected. 19. Power On Indicator - shows that the unit is receiving power. 20. K/Ka-band Indicator - Shows the unit is receiving a K or Ka band signal. K/Ka indicator will flash for Ka band. 21. V- Shows that the unit is receiving a VG-2 signal. 22. VG-2 Button (1730/1732 Only)- Engages VG-2 detection mode. Total Band Protection - Complete Band Coverage that detects laser, radar, VG-2 and safety radar bands.

Mounting Guidelines

Mount the unit as low as possible near the center of the windshield. Do not mount your unit behind wipers, ornaments, mirrored sunscreens, etc. These obstructions have metal surfaces which can affect radar and laser signals and reduce critical warning time. (Regular tinted glass does not affect


Some windshields have an Instaclear or Electriclear type coating, which affect radar signals. Consult your dealer or the owners manual supplied with yourvehicle to determine if your windshield has this coating. Avoid placing unit in direct contact with wind shield. To reduce the possibility of theft, conceal your unit when not in use.

Windshield Mounting

Install the two suction cups and rubber bumper onto the bracket by fitting them into their holes. Press the suction cups onto the windshield at the location you have chosen.
IMPORTANT: Some newer cars have a plastic safety coating on the inside of the windshield. The windshield bracket may leave permanent marks on this type of surface. To find out if your vehicle has this type of windshield, check the owners manual or ask your dealer. We recommend that you do not leave the suction cup bracket on the window in direct sunlight. If the detector is removed, this may cause blistering of the dash in some vehicles.

Power Connection

Plug the small end of the power cord into the units power jack. Plug the large end into the vehicles cigarette lighter.
Audio Level Adjustment (Continued)


Fuse Replacement
As audio level is adjusted, beeps are provided and the display indicates volume level. The more numbers illuminated, the higher the volume.

Quiet Mode

Quiet cancels audio during an alert and any new alert within 20 seconds. After approximately 20 seconds, 2 beeps are provided on any new alert, and unit then remains quiet.
The lighter socket plug is equipped with a replaceable 2 amp 3AG fuse located behind the silver tip. To replace the fuse, carefully unscrew the tip of the plug. IMPORTANT: Unscrew slowly. The tip contains a spring which may fly out when disassembling. Insert the new fuse with the spring and screw on the tip. With use, screw cap on plug may loosen. Retighten occasionally. Unscrew the tip of the lighter socket plug carefully when replacing the 2 amp fuse.
Feature Engaged Confirmation Self Test Mute (1734 Only)
Each time a button is pressed one beep confirms feature on, two beeps confirm feature off. Simply press the Quiet button during the self-test sequence to cancel the self-test audio. This will not affect radar/laser alerts. To restore the self-test audio, simply press the Quiet button during the next self-test.
Press Quiet to cancel the audio. Press Quiet a second time during an alert to restore the standard audio alert pattern; or turn the unit off, then on.

City Mode

Whistlers City Mode is designed to reduce the annoyance of automatic door openers, intrusion alarms and other devices which share frequencies with police radar.
Press City to engage City. Pressing City a second time cancels City Mode.
Setting Saver (1734 Only)

Power On and Self Test

Each time your Whistler detector is turned on, an automatic self-test sequence confirms that the speaker and visual displays are functional. To increase volume, continue turning the volume knob.
Setting Saver saves your personalized settings so that when the detection is turned off and then on again, you do not have to re-enter them.
In City Mode, weak speed/safety radar signals give an initial alarm of two beeps, and then the unit remains quiet unless the signal strength increases, two additional beeps are provided.

Auto Quiet Mode

City/City 1/City 2 Mode (1734 Only)
Whistlers Three Stage City Mode is designed to reduce the annoyance of automatic door openers, intrusion alarms and other devices which share frequencies with police radar.
Press City to cancel Highway mode and engage City. Display will switch from H to C. Pressing City a second time engages City 1. Pressing City a third time engages City 2. Pressing City a fourth time returns to Highway mode.
Audio Level Adjustment (1734 Only)
Press Volume level. Press Volume level. up to increase audio down to decrease audio 8
The audio levels can be adjusted high to low, or low to high, in seven steps:

Pressing QUIET before a radar signal is detected provides an alternate alert pattern, consisting of four beeps (indicating X, K, Ka or Safety Radar) followed by clicking. The clicking will continue for as long as the detected signal is present or any new signal is detected within 20 seconds, becoming more rapid as the strength of the signal increases.
Note: 1734 will go to volume level 1 instead of clicking. If Auto Quiet is engaged, pressing QUIET while the unit is alarming will cancel the beeps or clicking. Pressing QUIET a second time when the unit is notalarming will cancel Auto Quiet mode and restore the continuous audio alert pattern. 9

City Mode (Continued)

Engaging/Disengaging VG-2
See VG-2 detection mode to turn this feature on.
Laser Audio / Visual Alerts


In City Mode, weak speed/safety radar signals give an initial alarm of two beeps, and then the unit remains quiet unless the signal becomes very strong. When the signal strength increases, two additional beeps are provided. In City 1 Mode, only the X band sensitivity is lowered. In City 2 Mode, X-band is not detected. CAUTION: Some towns/small cities may still be using X band radar. City Modes do not change the audio alert for laser or VG-2.
Vehicle Battery Saver Mode
The Vehicle Battery Saver Mode automatically shuts off your detector after 6 hours if you forget to turn it off. The timer is reset if the detector is turned off, unplugged or any button is pressed before the time has expired. The detector will alert you with an audible and visual warning before it shuts off.During this warning you can momentarily reset the unit by pressing any button. This will reset the timer. If the unit has automatically turned itself off, press any button to turn the unit back on.
When a laser signal is detected, the display indicates a laser by scrolling the alert LEDs from right to left or displaying an L on the display. The audio alert is continuous for a minimum of 3 seconds.

Laser Tips

If you are the targeted vehicle, a laser gun can often determine your speed within a few seconds after you receive an alert. In this situation there is generally no time to safely adjust your speed. However, if you are traveling near or behind the targeted vehicle and receive an alert, response time should be sufficient. Any laser alert, regardless of duration, requires immediate action!

Highway Mode

Highway mode provides full audio warnings any time radar (X, K, Ka, Safety Radar) or laser signals are detected, and is recommended for open road driving.
Stay Alert Feature (1734 Only)
The Stay Alert Feature is designed to test a drivers alertness. To engage (when unit is not alarming):

Pulse Protection

Pulse (or instant-on) radar is more difficult to detect than conventional radar because it remains off until activated to measure the speed of a targeted vehicle. When a pulse type transmission is detected, your Whistler detector sounds an urgent 3-second audio warning and flashes the Alert strength indicators at their fastest rate. (The 1734 model displays P.) After the 3-second pulse alert, the standard alert pattern continues for as long as the signal is present. It is important to respond promptly to a pulse alert, since warning time may be minimal.
Dim/Dark Mode (1734 Only)
Press and hold Power for 2 seconds to reduce illumination to a Dim setting. Pressing and holding the power button for 2 seconds a second time engages Dark Mode.
Dim/Dark Mode reduces the illumination of the display.
The display illumination is further reduced. Dim or dark can be engaged during an alert. In Dark Mode, the display goes dark for as long as a signal is being detected and for 20 seconds after, then the display returns to the dimmer setting.
Pressing and holding the power button a third time restores full illumination to the display. 11
Press and hold City for less then 2 seconds. The H or C will flash indicating Stay Alert is activated.Within 30-60 seconds two beeps are sounded; to show alertness, the driver must press either the Volume, City or Quiet button within 3-5 seconds. If the button is pressed within 3-5 seconds, the cycle is repeated. If a button was not pressed within 3-5 seconds, alarm sounds and the display will flash all LEDs. Press Power to cancel Stay Alert.
WARNING!!! Stay Alert is NOT intended as a
substitute for adequate rest. You should NOT operate a vehicle if you are drowsy. During extended periods of vehicle operation, you should take frequent breaks. Improper reliance on the Stay Alert may result in vehicle damage, personal injury or death. NEVER OPERATE A VEHICLE IF YOU ARE DROWSY. 12
Safety Warning System/Audio/Visual Alerts When your 1710, 1730, 1732 or 1733
Whistler detector detects a safety radar signal, it provides a distinctive audio tone and illuminates the first LED and the last LED of the Signal Strength Indicator. The 1734 Seven Segment display shows an S. and a decimal point when a Safety radar signal is detected.

Alert Alert


VG-2 Detection Mode

The VG-2, also known as a radar detector detector, is a special receiver used by police to detect signals radiated by a radar detector. See page 21 for more information on VG-2. 1710: Does not have VG-2 cloaking. 1730/1732: Press the VG-2 button once. Unit beeps once for on, twice for off. 1733/1734: Press and hold the quiet button. Unit beeps once for VG-2 on, twice for off. When a VG-2 signal is detected the VG-2 alert is sounded. After 3 seconds the audio is cancelled and the VG-2 indicator flashes at a slower rate (Power LED flashes on the 1730/1732 models). This cycle is repeated if the VG-2 signal is again detected. During the period a VG-2 signal is detected, a radar signal cannot be detected. However, because the VG-2 alert has confirmed that a patrol car is nearby, you are already aware of the potential for speed monitoring and can adjust your speed accordingly. Laser detection is not affected while a VG-2 signal is detected. Note: On the 1730, 1732 & 1733 models, VG-2 must be turned on each time the unit is turned on to receive VG-2 Alerts.


Reset Features (1734 Only)
All user features can be reset to factory settings.

Default Factory

1. Unplug Power Cord from unit. 2. Press and hold Power and Quiet. 3. Plug Power Cord into unit. 4. Wait for 2 beeps. 5. Release Power and Quiet buttons. Unit is now reset. Audio to level (4). Default to Highway Mode. Dim/Dark Mode to full illumination of display. Auto Quiet Mode OFF. VG-2 Detection Mode OFF. Self Test Mute OFF
Default Factory Settings are:

1710A SWS Display

1730A/32 SWS Display

1733 SWS Display

1734 SWS Display
Note: You will not be able to receive SWS alerts if transmitters are not located in your area.

Total Band Protection

Complete Band Coverage that detects laser, radar, VG-2 and safety radar bands. (1730, 1732, 1733 & 1734 ONLY)
Your Whistler detector is expertly engineered and designed to exacting quality standards to provide you with reliable, trouble-free operation. If your unit has been correctly installed following the guidelines in this manual, but is not operating optimally, please refer to the troubleshooting guide below. PROBLEM: No display or audio. Check fuse in Whistler plug; replace if necessary with a 2 amp 3AG type. Check fuse for lighter socket; replace if necessary. Make sure lighter socket is clean. PROBLEM: Audio alerts are not loud enough. Cancel Auto Quiet Mode or City Mode. Check audio level setting (see pg.8).
PROBLEM: Unit gives laser alert when
accelerating. See F. A. Q. on website.


In Most States YES! Laser-Radar detectors are legal in every state (with the exception of Virginia and Washington, D.C., which have local regulations restricting the use of radar receivers in any vehicle) when used in automobiles or light trucks (under 10,000 lbs.). Concerning trucks over 10,000 lbs., the Federal Highway Administration (FHWA) issued a regulation, effective January, 1994 which prohibits radar and laser detector use in these types of vehicles nationally. Prior to the FHWA regulation, laws existed in the state of New York restricting the use of radar detectors in trucks over 18,000 lbs. and in Illinois in trucks over 26,000 lbs.


Radar Facts
A radar gun operates by transmitting radio waves at certain frequencies which reflect off objects and are then picked up by the radar guns receiving section. When a radar beam reflects off a moving target, a measurable frequency shift occurs. The radar unit converts this shift into miles per hour to determine your vehicles speed. Currently, the FCC (Federal Communications Commission) permits operation of traffic radar guns at X Band (10.500 - 10.550 GHz), K Band (24.050 - 24.250 GHz), and Ka Band (33.400 - 36.000 GHz).

PROBLEM: Unit alarms when vehicle hits
bumps. Check for loose lighter socket; tighten and clean. Check connections at both ends of power cord. Substitute another cord to determine if cord is defective. Return defective cord to the factory. If difficulties occur which cannot be solved by information in this Troubleshooting Guide, please call Whistler Customer Service at 1-800-531-0004 or visit our FAQ page at before returning your unit for service.
Note: A radar detector will not alarm if an
officer is not transmitting on any one of the above radar bands.

Care & Maintenance

During the summer months, avoid prolonged exposure to direct sunlight by removing your unit from the dash when your vehicle is parked for an extended period of time. Do not spray water, cleaners, or polishes directly onto the unit. The spray may penetrate through the openings and damage the unit. Also, do not use any abrasive cleaners on the units exterior.

FCC Information

FCC ID HSXWH01 - 1710/1730/1732/1733 FCC ID HSXWH10 - 1710/1730/1732/1733 FCC ID HSXWH14 - 1734

Laser Facts

Its well documented that many radar guns cannot reliably provide the speed of a targeted vehicle that is traveling in a group of vehicles. In contrast, a laser gun can target a specific vehicle out of a line of traffic and determine its speed. The advantage of laser over radar in terms of target identification is the result of the laser guns narrow beam. A radar transmission can cover more than a four-lane highway at a distance of 1,000 feet, compared with a laser transmission which covers about 3 feet at the same distance. For best protection, keep these points, listed on the following section, in mind:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. IMPORTANT: FCC requirements state that changes or modifications not expressly approved by Whistler could void the users authority to operate the equipment.

Laser Facts (Continued)

Because your vehicles license plate or headlights are the laser guns primary targets, mounting your Whistler detector on the dashboard can improve laser detection at short range. Do not follow closely behind any vehicle you cannot see through. If you cant see past a vehicle ahead of you, chances are your detector wont either. The receiving range of your laser detector will not be the same as a radar detector. Laser guns are most often used at short range. Whistler Laser/Radar detectors receive all current laser guns which operate at a laser wavelength of 905 +/- 10mm. Pro Laser I II III LTI 20-20 Ultra Lyte
Radar Detector Detectors (VG-2) Spectre The Interceptor VG-2, or simply VG-2,
is a microwave receiver used by police to detect signals radiated by the local oscillator of a radar detector. Because its purpose is to identify persons driving with radar detectors, the VG-2 is known as a radar detector detector.The VG-2 is the primary tool used by the police to identify radar detector equipped vehicles. If caught, in a state where detectors are illegal, (see page 18), drivers risk losing their radar detector and receiving a fine. In addition, instant-on radar is almost always used in combination with a VG-2, leaving unsuspecting motorists vulnerable to receiving two ticketsone potentially for speeding, the other for possession of a detector. Having a radar detector capable of detecting the VG-2 may alert you to the presence of a speed trap. For more information on speed monitoring technologies, please visit our FAQ page on our website: It is the responsibility of the individual radar detector owner to know and understand the laws in your area regarding the legality of the use of radar detectors. NOTE: Having a radar detector capable of detecting the VG-2 may alert you to the presence of a speed trap. The newest tool Police have to detect radar detectors is called Spectre, as of this printing. Spectre can detect all undetectable (VG-2) laser/radar detectors on the market.


Consumer Warranty
This WhistlerLaser/Radar detector is warranted to the original purchaser for a period of one year from the date of original purchase against all defects in materials and workmanship. This limited warranty is void if the unit is abused, modified, installed improperly, if the housing has been removed, or if the serial number is missing. There are no express warranties covering this product other than those set forth in this warranty. All express or implied warranties for this product are limited to one year. Whistler is not liable for damages arising from the use, misuse, or operation of this product.

Service Out of Warranty

Units will be repaired at out of warranty service rates when:
The units original warranty has expired. A dated store receipt is not supplied. The unit has been returned without its serial number. The unit has been abused, modified, installed improperly, or had its housing removed.
Other Speed Detection Systems
Several techniques other than radar or laser are used to measure vehicle speeds. When these methods are being used, no detector can provide a warning. These techniques include: Pacing - A patrol car drives behind you and matches your driving speed. Vascar/Aircraft - The time it takes a vehicle to travel a known distance is measured.
Service Under Warranty During the warranty period, defective units will be repaired without charge to the purchaser when returned with a dated store receipt to the address below. Units returned without dated store receipt will be handled as described in section Service Out Of Warranty. Due to the specialized equipment necessary for testing a laser/radar receiver, there are no authorized service stations for Whistler brand detectors other than Whistler.
When returning a unit for service under warranty, please follow these instructions: 1. Ship the unit in the original carton or in a suitable sturdy equivalent, fully insured, with return receipt requested to:
Whistler Repair Dept. 1201 North Dixieland Rd Rogers, AR. 72756 Please allow 3 weeks turn around time.
Service Out of Warranty (Continued)
The minimum out of warranty service fee for your Whistler detector is $35.00 (U.S.). If you require out of warranty service, please return your unit as outlined in the section Service Under Warranty along with a certified check or money order for $35.00. Payment may also be made by MasterCard, VISA or American Express; personal checks are not accepted. In the event repairs cannot be covered by the minimum $35.00 service fee, you will be contacted by a Whistler technical service specialist who will outline options available to you. If you elect not to have your unit repaired, it will be returned to you along with your certified check or money order. IMPORTANT: When returning your unit for service, be certain to include a daytime telephone number, and an email address (if applicable).


Laser Wavelength: nanometers (nm) Radar Frequencies: 10.500 - 10.550 GHz (X Band) 24.050 - 24.250 GHz (K Band ) 33.400 - 36.000 GHz (Ka Superwideband) Operating Temperature Range: -20 C to +80 C (-4 F to +176 F) Power Requirements: Operational 12 to 15 volts DC, 250mA nominal Vehicle Battery Saver, 30mA nominal. One or more U.S. patents may apply: #5,146,227, #5,379,456, #5,666,120, #5,990,821
Specifications are subject to change without notice.


These and other accessories can be ordered directly from Whistler by calling 1-800-531-0004 or visit our online store at

Order # Description

Visor Bracket Windshield Bracket Kit Straight Power Cord (5) Coiled Power Cord (7) Hardwire Kit (10' ) (for wiring to fuse box) Modular Cord Package (includes coiled and straight cords, and power adapter) Package of 8 Suction Cups Non Skid Dash Pad Straight Modular Cord & Socket Multiplier Coiled Modular Cord & Socket Multiplier
$ 6.95 $ 9.95 $14.95 $15.95 $ 9.95 $17.95
responsibilityfor loss or damage incurred in shipping. Therefore, please ship your unit insured with return receipt requested. CODs will not be accepted! 2. Include with your unit the following informtion,clearly printed:
IMPORTANT: Whistler will not assume
Your name and street address (for shipping via UPS), a daytime telephone number and an e-mail address, if applicable. A detailed description of the problem (e.g., Unit performs self-test but does not respond to radar). A copy of your dated store receipt or bill of sale.

206660 206661

$ 2.95 $ 6.95 $11.95 $12.95
3. Be certain your unit is returned with its serial number. For reference, please write your unit serial number in the following space: ________.
Units without serial numbers are not covered under warranty.

Customer Service

If you have questions concerning the operation of your Whistler detector, or require service during or after the warranty period, please call Customer Service at:
Representatives are available to answer your questions Monday - Friday from 8:00 a.m. to 5:00 p.m. (CT).
* Modular: Interconnecting pieces cord and plug. Shipping and handling (per order) $5.00 Prices are subject to change without notice.

IMPORTANT: To validate that your unit is within the warranty period, make sure you keep a copy of your dated store receipt. You may register your warranty online at, however, for warranty verification purposes, a copy of your dated store receipt must accompany any unit sent in for warranty work.




Moteur RTS 32PFL3403D 2120 DVD 550SH 30PF9946-12 RT-28FZ10RX RP3755 TX-26LXD70 Rode NT5 LP210 KAC-7404 MHS-PM5K BL-C10 CSB-76 Htadd3W NV-GS75EB SRM5100 HT-TX250 BS902 TY-42TM6B Saucier CDX-M7810 SW-40HT Theme Park Autoloader Fjdr1666W CM17A DPF-J3030 DSC-T77 G 2000FC FB206W BMW M5 DSC-W290 T HC-serie LPC-LM735X Maxxum 9XI UE-46C6710 I7110 FOR Ps3 KX-493 Presenter CA-1000 Reason 5 KDC-MV6521 Espio 120 Magic Ericsson T66 KX-TG8070PD ESD6200 MIO 168 BGW 100 CPD-G200 GD910 Shure PGX SA-VE815ED KDL-32P2530 MP-9485SA Istx85 80947 Umschlag CF-20E20 STR-SL500 Cxhd-1000C PT-AX200U X5 2004 BD-7181W Taurus-2002 31-17 SN-700 Intel 8051 S800H 240v VPL-SC50M Royal Blue VGN-A517B P-110 KV-36DZ900 Singer 9920 KL-60 KX-T4300BE NWZ-B133 EL-5230 5250 E1100 Azur 540A Sierra 1998 P600 LCD Manager TA-AV581 MDX4600 HQ7815 Plantronics CS60 KDC-7027 ARC 5R Radar Detector VGN-SZ61wn-C Pro PCI RL41wcsw KFX 450R CE137NEM-X Scbt330 VSX-519-K


manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding



1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101