www.whiteselectronics.com Part 1 of the White's M6 model metal detector instructional video.
Since 1950 we've made some of the best metal detectors on the market. Our YouTube channel is dedicated to each and every ...
www.whiteselectronics.com Part 5 of the White's M6 model metal detector instructional video.
NEWSLETTER OF THE THREE FORKS TREASURE HUNTERS CLUB
VOLUME XXVIII ISSUE 3 May 2011
EDITOR: Chuck Marcum PHONE: (918) 906-9912 EMAIL: firstname.lastname@example.org
The Outpost is published monthly by the Three Forks Treasure Hunters Club. We are a nonprofit organization dedicated to the promotion of metal detecting as a hobby. No brand or model of metal detector is endorsed by the club. Membership is open to the public with the only requirement being that all members follow the Treasure Hunters Code of Ethics. Club dues are $25.00 per family yearly. Any comments or stories that you would like to contribute to your newsletter are always welcome. CLUB MEETINGS: First Friday of each month. TIME : 7:15 P.M PLACE: Wagoner Community Building at the corner of Jefferson and Cherokee Streets in Wagoner Oklahoma. NEXT MEETING: Friday, May 6th BOARD MEETING: After the Club Meeting on May 6th CLUB PO BOX: P.O. Box 753 Wagoner, Ok. 74477-0753 CLUB WEB SITE: www.threeforkstreasurehunters.org 2011 CLUB OFFICERS: PRESIDENT: Larry ...
Use the following procedure at your own risk. Metal Detecting In The USA assumes no responsibility for your actions. White's Electronics currently has two battery packs available for the V3i and VX3. The first is the newest model battery pack with 2200mAh which costs $79.95. It can also be used with the DFX, XLT, MXT, M6, and the Slim Line TDI (SL) models. The second is the standard 1800mAh battery pack which costs $59.95 and can be used with all of the models above EXCEPT the Slim Line TDI. These battery packs require the new Spectra V3 NiMH Charger Stand P/N 802-5285 and the Spectra V3 NiMH Charger P/N 509-0037. This is the unit that uses a middle post and can only be inserted into the stand one way. This battery pack can be built with higher rated NiMH batteries for less than $40.00. Below are the instructions on how to do it.
Parts List 1. Penlight battery holder from White's or Kellyco. 2.22 gauge wire. 3. Plastic insulator material. 4. Strip of metal. 5. 1/16" and 3/16" heat shrink tubing. 6. 10K ...