Vertex Standard VXR-9000 Repeater is available at Puget Sound Instruments: Call 1.800.826.2907 or Visit Online: Vertex ...
YAESU FTDX9000 FTDX5000 & Elecraft K3 FTDX 5000.
Had a long night at my graveyard shift and knew I wouldn't be able to sleep during the day so I came up with the brilliant idea to ...
25 Watt Rack-Mount FM Repeater
FREQUENCY RANGE: MHz (VHF) MHz (UHF) 32 CHANNELS SYNTHESIZED WIDE OR NARROW BANDWIDTH PROGRAMMABLE PER CHANNEL PLL STEP SIZES: 2.5/5.0/6.25 kHz
SENSOR OUTPUT CTCSS REVERSE BURST WITH PROGRAMMABLE LENGTH MULTI-TONE DECODE
AUDIO VOICE COMPANDING BUILT IN
25 Watt Rack-Mount FM Repeater
CONSERVATIVE DESIGN FOR HIGH RELIABILITY
The VXR-9000E provides 25 Watts of clean, reliable power output in its standard configuration. controlled, ensuring a stable temperature environment for the VXR-9000E. Fan operation may be programmed via software (Off, Continuous, or Temperature-Controlled), and a "Malfunction" alarm is provided.
EXCELLENT RECEIVER PERFORMANCE
The VXR-9000E is crafted to survive in the most difficult RF environments. Outstanding selectivity, intermodulation rejection, and spurious and image rejection performance
READY FOR RACK MOUNTING AUDIO COMPANDING PER CHANNEL
of channels. For easy integration into existing repeater sites, the VXR9000E is shipped ready for ...
FP-31 Power Supply Unit Installation Manual
The FP-31 is an Internal Power Supply Unit which allows operation of the VXR-9000 Rack Mount Repeater from an AC Power Source. Mount the FP-31 Power Supply Unit onto the bottom chassis of the VXR-9000, using the four supplied screws.
FP-31 Power Supply Unit.. Front Panel (w/Carrying Handle).. AC Power Cord... Spare Fuse (5A)... Screw (HSM4x8)... 4
Remove the eleven screws affixing the top cover, then remove the top cover.
Affix the supplied Front Panel using the four screws removed from the VXR-9000 in the first step.
Remove the four screws on the dummy panel of the VXR9000, then remove the dummy panel from the VXR-9000.
Replace the top cover and its eleven screws. Connect the DC Cable of the FP-31 to the Main Power Source Connector on the VXR-9000 rear panel, then connect the supplied AC Power Cord between the FP-31 AC jack and AC line outlet.
Route the DC Cable of the FP-31 through the heatsink slit in the bottom of the VXR-9000 ...
Yaesu UK Ltd Unit 12, Sun Valley Business Park Winnall Close Winchester SO23 OLB United Kingdom Tel: +44 (0) Fax: +44 (0) Email: firstname.lastname@example.org
Declaration of Conformity
We, Yaesu UK Ltd. certify and declare under our sole responsibility that the following equipment complies with the essential requirements of the Directive 1999/5/EC. Type of Equipment: Brand Name: Model Number: Manufacturer: Address of Manufacturer: FM Repeater VERTEX STANDARD VXR-9000EV / VXR-9000EU Vertex Standard Co., Ltd. 4-8-8 Nakameguro Meguro-ku, Tokyo 153-8644, Japan
Applicable Standards: This equipment is tested to and conforms to the essential requirements of directive, as included in following standards: EN -2 V1.1.1 Radio Standard: EMC Standard: EN -01 V1.8.1 EN -05 V1.3.1 EN 60065: 2002 Safety Standard:
A1:2006 + A11:2008
The technical documentation as required by the Conformity Assessment procedures is kept at the following address: Company: Address: Yaesu UK Ltd Unit 12, Sun Valley Business Park, ...