Yamaha 01V96 Version2 Upgrade Guide
This document explains how to upgrade the 01V96 system software to V2.00 or later.
Precautions (please be sure to read these precautions)
The user assumes full responsibility for the upgrade. Back up important data before upgrading. If you fail to follow these instructions properly, or turn off the 01V96 or disconnect the USB cable while the upgrade is in progress, the 01V96 may be damaged. This software is for upgrading the 01V96 system software from a computer via USB. MIDI drivers other than the Yamaha USB-MIDI driver cannot be used. If the upgrade fails while the new system software is being transferred to the 01V96 due the power being turned off, the USB cable disconnected, etc., when the 01V96 is turned back on again it will startup in download mode, not normal mode. In this case you should reconnect the cable and perform the upgrade again. If the 01V96 does not work properly after upgrading, and youve tried upgrading several times, please contact your Yamaha dealer. This software and its documentation is copyright Yamaha Corporation. Reproducing or modifying all or part of this software or its documentation without permission is strictly prohibited. The screen shots in this guide are for use with this upgrade procedure only and may be different to the actual screen shots. Windows is a registered trademark of Microsoft Corporation. Apple, Mac, and Power Macintosh are registered trademarks and Mac OS is a trademark of Apple Corporation, Inc. OMS is a trademark of Opcode Systems, Inc. All other trademarks are the property of their respective holders and are hereby acknowledged.

System Requirements

Windows OS: Computer: Windows 98SE, Me, 2000, XP Home Edition, XP Professional PC that features a USB port and an Intel Pentium or Celeron-family processor of 433 MHz or higher Memory: Hard disk: Display: 128 MB or more Available space of 10 MB or more 1024 x 768 pixels, 256 colors or more (High Color 16-bit or more recommended) Macintosh OS: Computer: Memory: Hard disk: Display: Mac OS 9.0 - 9.2.2, Mac OS X 10.2 or higher Power Macintosh G3/233 MHz or higher that features a USB port Available memory of 16 MB or more (Turn off the virtual memory.) Available space of 10 MB or more 1024 x 768 pixels, 256 colors or more (32,000 colors or more recommended)
Contents of the folder Windows DMUpgrade.exe Other files System software installer Other files are necessary for installer. (Keep all files on the folder.) Macintosh 01V96UpgradeE Other files System software installer Other files are necessary for installer. (Keep all files on the folder.)
Upgrading the System Software
1. Start the computer and check to see if the following steps are complete. Installing the Yamaha USB-MIDI Driver in the computer Connecting the computer and the console using a USB cable Backing up the data in the user memories in the console Note: Before starting the upgrade program, quit all other programs. While the upgrade is in progress, do not start any other programs or switch between windows. Note: If your computer enters Sleep or Energy Save mode, data transfer to the 01V96 may stop, so disable these functions to prevent this from happening. Note: Do not connect any USB devices other than the 01V96, USB mouse or USB keyboard. Connect the 01V96 directly to a USB port on your PC, not via a USB hub. 2. While pressing and holding down the [CLEAR] button on the 01V96, turn on the power to the console. Continue holding down the [CLEAR] button until FLASH UPDATE appears on the display. 3. Double-click DMUpgrade.exe (or 01V96UpgradeE for Mac OS)
The installer window opens.

Click [Next].

The following I/O port setting window opens.
5. Make sure that YAMAHA USB IN 0-1 is selected for the Input port and that YAMAHA USB OUT 0-1 is selected for the output port, then click [Next]. If you are using Mac OS 9, select 01V96-1 for the Input port, and 01V96-1 for the output port. Note that the port names vary with the OMS setup files.
6. The Consoles FLASH UPDATE is Ver1. message appears. If your Flash Update has been updated to the latest version, this message does not appear.

The installation process begins.
7. Click [Next]. A message indicating the update progress opens, and the Flash Update is updated. The updating process takes about one minute.
8. The Completed upgrade for FLASH UPDATE. message appears.
9. Turn off the power to the console, then press and hold down the [CLEAR] button and turn on the power.
10. The console displays FLASH UPDATE. Click [Next]. A window indicating the installation progress opens, and the system software is installed. The installation process takes a few minutes
11. When the installation is complete, the following window opens and the 01V96 reboots itself in normal mode.
When upgrading V1.xx to V2.xx, the user memories in the console are automatically initialized. Load the data from the Studio Manager application, if necessary. And in this case, the console will display the fader calibration screen. Since the calibration data is not initialized, you should normally select 4 QUIT to halt calibration. For details on fader calibration, refer to the 01V96 Version 2 owner's manual.

Error Message List

Errors in connection to the console Unable to connect to the console. Make sure that the power to the console is turned on and that the console and the computer are connected via the USB cable. If the console is in normal operation mode, press and hold down the [CLEAR] button and turn on the power to the console to place it in Flash Update mode. If you are using Mac OS 9, make sure the OMS setup is correct. If the error persists, turn off and on the power to the console and restart the installer. This application does not correspond to the console. This message appears when the installer is not compatible with the console, for example when you used a DM1000 installer to upgrade the 01V96. This version has already been installed. No need to install. To cancel installation, click [Do not install]. To install and overwrite the current software click [Reinstall]. Cancel installation if there is no problem in operating the console.
Error Messages on the Console Protocol Error Vendor Error This message appears before updating the FLASH UPDATE to ver.2.0. This is not a malfunction.

SPECIFICATIONS

GENERAL SPECIFICATIONS
Internal processing Number of scene memories Sampling frequency 32bit (Accumulator 58bit) 99 Internal External Signal delay 44.1kHz, 48kHz, 88.2kHz, 96kHz Normal rate: 44.1kHz-10% - 48kHz+6% Double rate: 88.2kHz-10% - 96kHz+6% CH INPUT 1 to -16dB 20 CH INPUT 13 to 16 -26dB -26dB 10kohms +4dB 10kohms 10kohms 600ohm Lines 600ohm Lines 600ohm Lines -6dBV -6dB -10dB +4dB +4dB -10dB +24dB +24dB +10dB TRS phone jack (Unbalanced) RCA pin jack (Unbalanced) 3kohms
ANALOG INPUT CHARACTERISTICS
Input terminal PAD GAIN -60dB Actual load impedance For use with nominal 50-600ohm Mics & 600ohm Lines Input level Sensitivity -70dB -26dB -6dB -36dB Nominal -60dB -16dB +4dB -26dB Max. before clip -40dB +4dB +24dB -6dB TRS phone jack (Balanced) A:XLR-3-31 type (Balanced) B:TRS phone jack (Balanced) Connector
Less than 1.6ms CH INPUT to STEREO OUT (@Sampling frequency = 48kHz) Less than 0.8ms CH INPUT to STEREO OUT (@Sampling frequency = 96kHz) 100mm motorized x17 CH INPUT to STEREO OUT Less than 0.05%, 20Hz to 20kHz @+14dB into 600ohms Less than 0.01%, 1kHz @+24dB into 600ohms (@Sampling frequency = 48kHz) Less than 0.05%, 20Hz to 40kHz @+14dB into 600ohms Less than 0.01%, 1kHz @+24dB into 600ohms (@Sampling frequency = 96kHz) CH INPUT to STEREO OUT 0.5, -1.5dB, 20Hz - 20kHz @+4dB into 600ohms (@Sampling frequency = 48kHz) 0.5, -1.5dB, 20Hz - 40kHz @+4dB into 600ohms (@Sampling frequency = 96kHz) 110dB typ. DA Converter (STEREO OUT) 106dB typ. AD+DA (to STEREO OUT) @fs=48kHz 106dB typ. AD+DA (to STEREO OUT) @fs=96kHz -128dB Equivalent Input Noise. -86dB residual output noise. STEREO OUT STEREO OUT off. -86dB (90dB S/N) STEREO OUT STEREO fader at nominal level and all CH INPUT faders at minimum level. -64dB (68dB S/N) STEREO OUT STEREO fader at nominal level and one CH INPUT fader at nominal level 74dB CH INPUT (CH1-12) to STEREO OUT/OMNI (BUS) OUT 40dB CH INPUT (CH13-16) to STEREO OUT 74dB CH INPUT (CH1-12) to OMNI (AUX) OUT (via pre input fader) 74dB CH INPUT (CH1-12) to MONITOR OUT (via STEREO BUS) 80dB adjacent input channels (CH1-12) 80dB adjacent input channels (CH13-16) 80dB input to output
Fader resolution Total harmonic distortion * Input GAIN=Min.
CH INSERT IN 1 to 12 2TR IN [L, R]
ANALOG OUTPUT CHARACTERISTICS
Output terminal STEREO OUT L, R OMNI OUT 1 to 4 MONITOR OUT L, R CH INSERT OUT 1 to 12 2TR OUT [L, R] PHONES Actual source impedance 150ohms 150ohms 150ohms 600ohms 10Kohms 100ohms 40ohm Lines 12mW 75mW For use with nominal 600ohm Lines 10kohm Lines 10kohm Lines 10kohm Lines 600ohm Lines 8ohm Lines Output level Nominal +4dB +4dB +4dB +4dB -10dBV 4mW Max. before clip +24dB +24dB +24dB +24dB +10dBV 25mW ST phone jack (Unbalanced) Connector XLR-3-32 type (Balanced) TRS phone jack (Balanced) TRS phone jack (Balanced) TRS phone jack (Unbalanced) RCA pin jack (Unbalanced)

Frequency response

Dynamic range (maximum level to noise level) Hum & noise level ** (20Hz-20kHz) Rs=150ohms Input GAIN=Max Input PAD=0dB Input PAD=0dB Input sensitivity=-60dB Maximum voltage gain
DIGITAL INPUT CHARACTERISTICS
Terminal 2TR IN DIGITAL ADAT IN Format IEC-60958 ADAT *1 Data length 24bit 24bit Level 0.5Vpp/75ohms Connector RCA pin jack OPTICAL
Crosstalk (@1kHz) Input GAIN=min
DIGITAL OUTPUT CHARACTERISTICS
Terminal 2TR OUT DIGITAL ADAT OUT Format IEC-60958 Consumer use ADAT Data length 24bit 24bit Level 0.5Vpp/75ohms Connector RCA pin jack OPTICAL
* Total Harmonic Distortion is measured with a 6dB/octave filter @80kHz. ** Hum & Noise are measured with a 6dB/ octave filter @12.7kHz;equivalent to a 20kHz filter with infinite dB/octave attenuation.

Power requirements

Japan: North America: Other Areas:
AC100V 50/60Hz, 90W AC120V, 60Hz, 90W AC220-240V, 50/60Hz, 90W
Dimensions (W x H x D) Weight
436 x 150 x 548 mm (17-3/16" x 5-5/16" x 21-1/4") 15kg (33.1lbs.)
CONTROL I/O CHARACTERISTICS
Terminal TO HOST USB MIDI IN *1 OUT Format USB MIDI MIDI MIDI Level 0V - 3.3V TTL/75ohms TTL/75ohms Connector B type USB connector DIN Connector 5P DIN Connector 5P DIN Connector 5P BNC Connector BNC Connector

LIBRARIES

Number of factory presets Effect library (EFFECT 14) Compressor library Gate library EQ library Channel library Input patch library Output patch library 1 Number of user libraries 32 WORD CLOCK

THRU IN OUT

*1. MIDI IN can use as TIME CODE IN MTC.
Specifications and appearance subject to change without notice. All trademarks and registered trademarks are property of their respective owners. Windows is a trademark of Microsoft Corporation. Macintosh is a trademark of Apple Inc. Nuendo is a trademark of Steinberg Media Technologies GmbH. Pro Tools and Digidesign are trademarks of Avid Technology Inc. Adat is trademark of Alesis Corporation. Tascam, TDIF are trademarks of Teac Corporation.

For details please contact:

www.yamahaproaudio.com

Printed in Japan

LPA552

Cutting-edge Performance and Processing Capability
You simply wont find another digital console that offers this level of performance flexibility in a package this compact and affordable. The 01V96VCM will comfortably fit in the space and budget of the small studio while delivering sonic quality, effects, control, and compatibility that are second to none.

Built-in VCM Effects

Previously available as add-on effect packages for top-line digital consoles, Yamahas highly regarded VCM Channel Strip processors and REV-X reverb are now standard features on the 01V96VCM. These extraordinary effects are based on innovative Virtual Circuit Modeling technology that actually models the original analog circuitry right down to the last resistor and capacitor. VCM effects are capable of capturing subtleties that simple digital simulations cannot even approach, going beyond simple simulation and delivering the truly musical performance that makes classic analog gear invaluable even in todays digital production environment. The 01V96VCM includes the Channel Strip package with COMP276, COMP260, and EQ601 effects that bring vintage analog compression and EQ to life in the digital domain. It also includes the same REV-X algorithm that is behind the unmatched performance of Yamahas stand-alone SPX2000 signal processor, delivering the most natural reverb and ambience available anywhere.

CHANNEL STRIP

This compressor and EQ effects faithfully captures the unique saturation effect of analog circuitry. Includes five models that employ VCM technology to recreate the sound and characteristics of classic compression and EQ units from the 70s. Fine-tuned by leading engineers, and featuring carefully selected parameters in a simple interface.

REVERB

These reverb effects employ the latest REV-X algorithms first introduced in Yamahas SPX2000 Professional Multi Effect Processor. The REV-X programs feature the richest reverberation and smoothest decay available, based on years of dedicated research and development. REV-X Hall, REV-X Room, and REV-X Plate programs are provided, with new parameters such as room size and decay envelopes that offer unprecedented definition and finer nuance control. The REV-X Hall and REV-X Room programs have a very open sound, while REV-X Plate delivers a brighter tonality that is ideal for vocals. All models deliver dense, warm reverb that does not interfere with the natural timbre of the source.
Still Small and Professional Now with VCM Effects
The 01V96VCM delivers the performance and reliability of Yamahas acclaimed digital live sound and production consoles in a remarkably compact design that is perfect for home and professional applications where space is limited or maximum portability is required. It may be small but it can handle up to 40 inputs, and can be cascaded if more are required. And now, in addition to the many improvements that were implemented in the 01V96 Version 2, the 01V96VCM comes with a selection of Yamahas unsurpassed VCM effects built in. Of course the entire console effects included features 24 bit/96 kHz operation for ultimate resolution and sound quality that will satisfy the most demanding applications.

Compressor 276 (mono)/Compressor 276S (stereo): Recreate the fast response, frequency characteristics, and tube-amp saturation of the most in-demand analog compressors for studio use. Compressor 260 (mono)/Compressor 260S (stereo): Features faithful modeling of the solid-state VCA and RMS detection circuitry of the late 70s for live sound reinforcement applications. Equalizer 601: Delivers the unique characteristics of 70s analog EQ circuitry, featuring graphical editing capability on both the console and PC displays.

REV-X (HALL)

REV-X (ROOM)
The Team and the Technology Behind the Sound
The division known at Yamaha as Ks Lab (K for Kunimoto) was established in 1987 to develop new modeling technology that would become the next phase in synthesizer evolution after the FM and PCM tone generators that were the mainstay of the synthesizer world at the time. Research and development has continued relentlessly ever since, and in 2001 the Ks Lab team began aiming its formidable technological capabilities at physical modeling for effects, and thats when Mr. Kunimotos goal began to take on primary importance.

REV-X (PLATE)

The Birth of VCM
It took more than two years of concentrated work, but by 2003 Ks Lab had refined and re-purposed physical modeling to the point where it was ready for practical implementation. in the form of Virtual Circuit Modeling. VCM is the cornerstone of Yamahas Add-On Effects, and achieves its stunning sonic and musical performance by actually modeling the individual characteristics of the multitude of parts and components that contributed to the final sound of the original analog circuits.
Engineer interviews Steve Levine
Recording and mixing engineer, worked for many artists including Culture Club, The Beach Boys, Honeyz, and Gary Moore. I am very impressed with the Rev-X reverbs. These reverbs sound so good, a match for any current hardware reverb unit - the Rev-X room simulation is the best room sound I have heard since the famous Quantec room simulator. The vintage EQs & compressors really extend the range of EQ & compression options available. The original DM2000 EQs have been praised in the press for their sonic purity & accuracy now you have available EQs and compressors that add that special vintage colour that many artists, producers & engineers wish to add to their tracks, but without the sound of crackling pots !!!

Super High Fidelity

24 bit/96 kHz Performance Takes Digital Sound To the Next Level
Digital audio technology has come a long way since the early days of 16 bits at 44.1 kHz a format that many considered to be the reason for harsh, cold sound. The entire industry is now settling on 24 bit/96 kHz digital operation for significantly superior sonic quality. The 01V96VCM does give you a choice you can work at 44.1 kHz, 48 kHz, 88.2 kHz, or 96 kHz, depending on the needs of each individual project. But when you want the truly transparent, incredibly dynamic sound of 24 bits at 96 kHz, the 01V96VCM is ready to deliver. It even includes a comprehensive range of superb 96 kHz compatible stereo effects with 32 bit internal processing.
Inputs 13 through 16 accept balanced/unbalanced line-level signals singly (each input has an independent trim control) or in pairs for stereo input. When you need more, Yamaha offers a range of Mini-YGDAI expansion cards that can simply be plugged into the 01V96VCM expansion slot to provide additional I/O in a variety of formats: ADAT, AES/EBU, TDIF, CobraNet, EtherSound, MADI or analog.
Selected Channel Controls
The SELECTED CHANNEL controls include the handson panning and EQ controls for the currently selected channel, with analog-style buttons and knobs for direct, easy access to the parameters. Need to adjust the high-mid frequency a little? Just tap the HIGH MID key and turn the FREQUENCY knob until you get the sound you want.
Top-quality Compression, Gating, EQ and Delay
All input channels on the 01V96VCM feature flexible, independent compression and gating/ducking processors for dynamics control. All bands on the 4-band parametric channel equalizers are fully sweepable from 20 Hz to 20 kHz, with bandwidth variable from 0.1 to 10 and a 18dB gain range for extraordinary equalization flexibility. The channel delays also go well beyond the norm, with a maximum delay of 452 milliseconds (96 kHz mode). Even the stereo bus, eight mix buses, and eight aux buses have individual compression and EQ!

20-bus Configuration

The 01V96VCM offers a main stereo program bus, eight individual mixing buses, two solo buses, and eight auxiliary buses a total of 20 in all. This gives you plenty of signal-routing options to adapt to just about any mixing requirements.
Fast, Flexible Digital Patching
All available inputs, outputs, effects, and channel inserts can be assigned to any of the consoles channels or outputs via the 01V96VCMs remarkably versatile, easy-to-use digital patching system. For example, any of the effect processors can be assigned to an auxiliary bus for sendtype operation, or inserted directly into any input channel as required. A direct out function also allows the signal from any of the input channels to be routed directly to any digital or analog output. The eight auxiliary buses can also be patched to anywhere in the system. Centralized control means youll never have to run around to physically re-patch cables whenever you need to reconfigure the system, while patch setups you might want to use again can be stored in the 01V96VCM patch library for instant recall at any time.

Effects & Advanced User Interface Advanced Input Functioning
Channel Strips With Precision 100-mm Motor Faders
The 16 channel strips on the 01V96VCM panel provide access to the most essential operations for the corresponding channels. Depending on the currently selected layer, the channel strips will control channels 1 through 16, channels 17 through 32, or the eight AUX sends and eight buses (the Master Layer). Also, the channel faders will function according to the settings in the FADER MODE section. In addition to a 100-millimeter motor fader, each channel strip includes a channel ON/OFF key, a SOLO key, and a SEL key that assigns the channel as the consoles selected channel. Detailed panning and EQ control for the currently selected channel is available via the SELECTED CHANNEL controls. The master STEREO fader is also a 100-mm motor type, with its own ON and SEL keys.
Internal Effects Fully Support 96-kHz Processing

Swiss 85 + Swiss 85

You could use external digital effect processors with the 01V96VCM, but whats the point when it already features built-in topperformance 24 bit/96 kHz effect processors? Also, you run the risk of lower audio quality if you have to convert down to a lower sampling rate for effect processing which is exactly whats going to happen if you use hardware or software processors that dont offer 24 bit/96 kHz performance anywhere in your signal chain. Thats why Yamaha included a comprehensive range of 96 kHz compatible stereo effects in the 01V96VCM. You can use two effects simultaneously at 88.2/96 kHz, and up to four effects at lower sampling frequencies.
FX1 LIB DUAL PHASER America 70 + America 70

Swiss 78 + Swiss 78

Vintage Stomp Package

VINTAGE PHASER MAX100

Disclaimer
The names of programs or menus incorporated in VCM and Add-On Effects are for descriptive purpose only. Reference to product names, trademarks, artists and songs is made for the sole purpose of identifying products and sounds studied for modeling and describing the sound nuances Yamaha attempted to create through use of its proprietary technology. Such reference does not constitute representations that they physically possess equal qualities, and does not imply any cooperation or endorsement by such manufacturers or artists. The products, trademarks are the property of their respective owners.
Advanced Layer and Bus Operation

Fader Mode

The FADER MODE keys allow the 01V96VCM faders to be instantaneously switched between fader and auxiliary level control. Since the faders feature fast, precise motor-drive mechanisms, they immediately respond by moving to the appropriate settings for the selected mode.

Enhanced User Interface

Large LCD Panel
The new 01V96VCM display is a high-resolution 320 x 240 dot LCD panel that provides easy visual access to all of the consoles functions and parameters. Many parameters are displayed graphically so you can see whats happening at a glance EQ curves and compression parameters are especially readable in this format.
Enhanced Integrated DAW Control
The 01V96VCM has been designed to seamlessly integrate with leading digital audio workstations to create a complete production and mixing environment. Extensive support is provided for Digidesigns Pro Tools system as well as Steinbergs Nuendo 4 and Cubase 4 for full control of mixing and processing parameters by using the 01V96VCM selected channel section, as well as transport/trackarming control and access to editing functions directly from the 01V96VCM control surface. Theres also a General DAW mode that provides compatibility with other workstations.

Versatile I/O Facilities

Rear Panel
The rear panel is home to balanced analog stereo and monitor outputs as well as four balanced omni outputs. The optical IN and OUT connectors for the 01V96VCMs built-in ADAT interface are also located on the rear panel. There are also digital 2-track inputs and outputs featuring coaxial connectors. On-board sample rate conversion allows CD players and other digital sources connected to the digital input to be monitored or routed to an input channel without having to be synchronized to the system clock. A range of synchronization and control options are available via word clock inputs and outputs, MIDI connectors, and a USB TO HOST connector which can be used for computer control via the supplied Studio Monitor software. The rear panel also has an expansion slot which will accept a wide range of Yamaha mini-YGDAI expansion cards that can add up to 16 additional channels in a variety of formats.
Layer Switching for Fast Access to 32-channel, Aux/Bus Fader + User-assignable Configuration
One of the advantages of digital control is that it allows extraordinary power and flexibility to be packed into minimum space. The 01V96VCM has 17 physical 100-millimeter motor faders. The first 16 can be instantly switched to handle input channels 1 through 16, 17 through 32, auxiliary sends 1 through 8 and buses 1 through 8, or user-assignable configuration via the consoles LAYER switches. In the user-assignable layer, a new added feature in version 2, you can create a mixed fader configuration of input and output channels, or you can use the faders as Fader Group Masters. Theres also a ST IN layer switch that switches between the stereo 1/2 or 3/4 inputs for the stereo layer controls. Having all controls right in front of you at all times not only saves space, it also means that all operations can be carried out without having to move away from the monitoring sweet spot.

Display Access

The DISPLAY ACCESS keys determine which type of data will be shown on the LCD panel a total of 12 selectable categories. This approach minimizes the need to scroll through on-screen lists when you need access to a particular type of data.
Built-in ADAT Optical Interface
The 01V96VCM comes with an industry-standard ADAT optical digital I/O interface built right in no options necessary. The ADAT Lightpipe optical I/O is standard on a wide range of current digital sound gear, so you can simply plug in via optical cables for 8 digital inputs and 8 digital outputs that will handle your digital signals without compromise. Additional optical I/O capacity can be added via the 01V96VCM expansion slot, as necessary.

Data Entry

Large cursor, INC/DEC, and enter keys are complemented by a data entry dial that lets you spin in desired values quickly and easily. The data entry dial also doubles as a shuttle/scrub dial for recorder or DAW control.
Expandable Data Libraries
Setting up EQ, compression, and other parameters for a mix from scratch can be a daunting task, so Yamaha has provided an extensive selection of presets in a range of libraries that can simply be selected and used unmodified, or edited to suit specific requirements. Libraries are provided for effects, compression, gating, EQ, I/O patching, and channel setups. Of course, your own setups can be added to the libraries for instant recall whenever they are needed.

EFFECT LIBRARY

01V96VCM Cascade Link
When you really need high capacity particularly for sound reinforcement applications the 01V96VCM offers 01V96VCM Cascade Link capability that allows two 01V96VCM units to be cascaded to create up to an

CASCADE IN PATCH

Scene & Memory

Scene Memory

Complete console setups can be memorized and instantly recalled via the 01V96VCM SCENE MEMORY controls. Memory is provided for up to 99 scenes. In addition to recalling scenes from the panel controls you can recall them remotely via MIDI program change messages, providing a handy degree of automation capability. The current scene number 01 through 99 is shown on the LCD panel. Additional scene memories can be managed via a computer running the supplied STUDIO MANAGER software. With version 2, you can copy and paste channel or parameter settings from the current scene into other scenes. This feature can be useful if you have already programmed several scenes, but want to edit certain parameters in all scenes.

Meter Window Selected Channel Window
2. Concert and Event Sound
Sound reinforcement applications generally require much more input and output capacity than studio production. If a single 01V96VCM wont do it, try cascading two 01V96VCM consoles you now have up to 80 input channels plus plenty of output channels and processing capacity to handle house sound and monitoring. The built-in dynamics and VCM effects can be a tremendous advantage in this type of application, too.

Up to 80 inputs

OMNI OUT 4 OMNI OUT 3 OMNI OUT 2 OMNI OUT 1 ST OUT L
MIDI and Signals (Cascade Link)

Q2031B

Input A B B Input A

MSR400

Output A Output A

01V96VCM

MSR800W F.O.H

MONITOR

3. Small Multi-Purpose Hall Installation
Capable of providing solutions not only in the sound reinforcement and recording environments, the 01V96VCM is also widely used in fixed installations similar to that shown, and has already gained an excellent reputation in the industry for this type of application. In this example, the 01V96VCM provides a mixing solution for a multi-purpose hall suitable for small-scale exhibitions, conventions, concerts, and other similar gatherings. This hall features a pair of hardwired FOH C112VA speakers, multiple ceiling speakers used for background music and public announcements, and MSR100 speakers that can be setup whenever needed for monitoring during concerts. And even in situations where all of these speakers must be used together, the 01V96VCM with its main Stereo Out complemented by four additional OMNI OUT channels can cope with ease. With the 01V96VCM, you also benefit from the flexibility and convenience only delivered by digital consoles for example, the Scene Recall function allows settings for a wide range of different applications to be instantly loaded, while User Defined Keys provide one-touch shortcuts to oft-used functions. What's more, as the acclaimed REV-X reverb from the SPX2000 effect processor and the Channel Strip package of VCM compressor and equalizer effects are pre-installed, audio quality rivaling even that of live-music clubs with vintage outboard gear costing tens of thousands of dollars can easily be achieved. With this stunning range of choice functions packed into such a compact body, the 01V96VCM is just the ticket for fixed installations.

Screen

Editing windows with enhanced controllability

Layer Window

C112VA

NOTE PC

With the upgrade to Version 2, a number of new windows are provided. These include the Master Fader Window that shows only the master fader, and the Meter Window that shows meters for all 32 channels. In the Layer Window, the master fader block now can be separated, while the fader level is shown by a numeric value as well as by graphic display. In the Selected Channel Window, the gate type indication and long-stroke channel meter are added. The Patch Edit Window is now clearer to see and can be resized as desired, while it also shows both inputs/outputs to/from each effect block. In the Library Window, you can now perform simultaneous operation of multiple scenes/libraries. The STUDIO MANAGER Version 2 also integrates the Effect Editor Window for controlling VCM Effects and other optional ADD-ON EFFECTS. Of course, settings for the main mixer functions can also be made off-line.
Effect Patch Window Patch Editor Window Master Fader Window Surround Editor Window
Wired Mics Video selector Ceiling-mounted projector MSR100 MSR100 Wireless Mics CD player Wireless Mic Receiver DVD player
Setup only when needed for monitoring.
P-3500S High-impedance amplifier

Video Audio

Ceiling Speakers

Options

ADD-ON EFFECTS
Software packages are available for adding unique and valuable effect programs to the 01V96VCM internal effect programs. With the 01V96VCM, You can add optional ADD-ON EFFECTS to the original collection of preset effects. You can edit, store and recall ADD-ON EFFECTS on the console in the usual way. In addition, a special GUI is available in the STUDIO MANAGER Version 2 editor to manage these effects.

Block Diagram

(Gain Reduction)

METER COMP

(Out Meter)

STEREO L STEREO R

A [INPUT] B [INSERT I/O] (1-12)

OFF ON

SOLO L SOLO R

+48V (each 4ch )

INPUT PATCH
BUS1 BUS2 BUS3 BUS4 BUS5 BUS6 BUS7 BUS8

INPUT 1(.32)

(Gain Reduction) PEAK SIGNAL

INSERT ATT

METER 4 BAND EQ

INSERT ON LEVEL

METER METER INSERT ON LEVEL ATT 4BAND EQ INPUT DELAY INSERT PAN

INSERT BAL OUTPUT DELAY

METER STEREO L

AD1-12

STEREO R Same as stereo master L
Key in 12ch Group (1-12,13-24.) AUX 1-8
MASTER STRIP PACKAGE (AE-021)
A tape saturation <open deck> package that faithfully captures the tape saturation of analog circuitry.
Employs VCM technology to recreate both the analog circuitry and tape characteristics that shaped the sound of open-reel tape recorders. The Open Deck provides models of four machine types: Swiss 70, Swiss 78, Swiss 85, and American 70. You can even combine different record and playback decks for a wider range of variation. You also have a choice of old and new tape types, tape speed, bias, and EQ settings that can vary the focus of the sound, distortion, and saturation characteristics.

ADD-ON EFFECTS can be only used with the PM5D/DM2000/DM1000/02R96/01V96. To use ADD-ON EFFECTS with the DM2000 Version 2, DM1000 Version 2, 02R96 Version 2 or 01V96 Version 2, please note the following. 1) The DM2000, DM1000, 02R96 or 01V96 must be Version 2 or higher. 2) Your personal computer must have a USB port and internet connection capability. 3) You must get web approval from Yamaha using the access key issued by the Yamaha approval server.
* When applying for web approval, use the CD-ROM and approval code within each ADD-ON EFFECTS package.
VINTAGE STOMP PACKAGE (AE-051)
In this package, virtual Circuitry Modeling technology delivers faithful models of the classic much-in-demand stomp boxes from the 70s that helped shape the sound of music history.

[INPUT] (13-14)

PEAK SIGNAL (Gain Reduction) (Out Meter)
LFE PRE/POST ON AUX INSERT DIRECT OUT 1(.32) ATT

METER AD

AD13-14
Key in Self or Stereo Link
INSERT INSERT ON LEVEL OUTPUT DELAY ON PAN

METER BUS 1(.8)

[2TR IN](L)

RCA GAIN

CH15/16/ 2TR IN

PEAK SIGNAL GAIN

ST IN 1-4

PEAK SIGNAL AD 15

LEVEL BUS to STEREO

[INPUT] (15) [2TR IN](R)

RCA GAIN GAIN

METER METER ON LEVEL

SOLO AUX1(.8) The same the above

[INPUT] (16)

4BAND EQ PAN LFE SOLO L

SOLO TRIM

Stereo Configuration

[2TR IN]

RCA R MONITOR /2TR IN DA

[SLOT]

SLOT 1-16

PRE/POST

SOLO R

OUTPUT SOLO

SOLO LOGIC MONITOR TRIM

MONITOR OUT LEVEL L

The names of programs or menus incorporated in ADD-ON EFFECTS are for descriptive purposes only. Reference to product names, trademarks, artists and songs is made for the sole purpose of identifying products and sounds studied for modeling and describing the sound nuances Yamaha attempted to create through use of its proprietary technology. Such reference does not constitute representations that they physically possess equal qualities, and does not imply any cooperation or endorsement by such manufacturers or artists. The products, trademarks are the property of their respective owners.
[ADAT IN] [2TR IN DIGITAL]

COAXIAL

ADAT1-8

BUS1-8 AUX1-8

[MONITOR OUT]

DA PHONES LEVEL R

2TRD L/R

[PHONES] METER

SELECT

OSCILLATOR

FX1 Return L/R

AUX1-8 INSERT SEND

FX1 SEND 1-2

EFFECT

SINE100Hz SINE1kHz SINE10kHz PINK NOISE BURST NOISE
ON to OUT PATCH for cascade BUS1 BUS
STEREO BUS1-8 AUX1-8 DIRECT OUT 1-32 INSERT OUT

OUTPUT PATCH

OMNI 1 OMNI 2 OMNI 3 OMNI 4

DA DA DA DA

[OMNI OUT]

FX2 SEND 1-2

FX2 Return L/R

CASCADE SELECT

BUS8 BUS STEREO L BUS STEREO R BUS SOLO L BUS SOLO R BUS AUX1 BUS AUX8 BUS

DITHER

[SLOT OUT] [ADAT OUT] [2TR OUT DIGITAL]

COAXIAL L (-10dBV) R

Available Mini-YGDAI card specifications
* Guidance on the use of Mini-YGDAI cards http://www.yamahaproaudio.com/myguide/index.php
Model Input 4 Output* Format AES/EBU ADAT TASCAM CobraNet EtherSound MADI mLAN AES/EBU AES/EBU AES/EBU AES/EBU
(AES-3id) Sampling Rate Converter for input Can handle 24 bit/96 kHz by double channel mode Can handle 24 bit/96 kHz by double channel mode Can handle 24 bit/96 kHz by double channel mode Can handle 24 bit/96 kHz by double channel mode Can handle 24 bit/96 kHz by double channel mode Maximum 5 Nodes Can handle 24bit/96kHz by double channel mode

METER AUX1-8 INSERT SEND

FX3 SEND 1-2

FX3 Return L/R

for cascade STEREO BUS AUX1-8 BUS SOLO BUS

2TR DIGITAL 2 DITHER

[2TR OUT]
Can handle 24 bit/96 kHz by double channel mode Can handle 24 bit/96 kHz by double channel mode Can handle 24 bit/96 kHz by double channel mode Can handle 24 bit/96 kHz by double channel mode

Input 16

Output*16
Format Analog Out Analog Out EtherSound A-Net A-Net Optocore

FX4 SEND 1-2

Digital I/O Cards

FX4 Return L/R

MY16-AE MY16-AT MY16-TD MY16-CII MY16-ES64 MY16-MD64 MY16-mLAN MY8-AE96 MY8-AE96S MY8-AE MY8-AEB MY8-TD MY8-AT

DA Cards

MY8-DA96 MY4-DA

L (+4dBu) R

[STEREO OUT]
When 96 kHz FX3, 4 cannot be used.

Third Party Cards

AVY16-ES 16/o-Y1 6416Y2

OPTOCORE AVIOM AVIOM

AuviTran

Dimensions

Waves Y96K
8 in / 8 out, Effects and ADAT I/O
The Waves Y96K DSP expansion card adds renowned Waves signal processors to compatible Yamaha digital consoles and workstations. The Y96K processor package includes the Renaissance Compressor and EQ, TrueVerb reverb, L1 Ultramaximizer, SuperTap delay, and DeEsser. These processors are all available in addition to the consoles on-board effects.
*1. Selectable from STEREO/BUS/AUX/DIRECT OUT/INSERT OUT/CASCADE OUT (STEREO, BUS1-8, AUX1-8, SOLO). See the users manual for further information. Details depend on each interface card.

TASCAM ADAT Analog Analog In Analog In Analog In

AD/DA Card AD Cards

MY8-ADDA96 MY8-AD96 MY8-AD24 MY4-AD

Rack-Mount Kit

Can handle 24 bit/96 kHz by double channel mode