[OPTION] AIEB1 Digital I/O / Multi-Out Expansion Board.
The AIEB1 adds six assignable outputs as well as both optical and coaxial digital In/Out.

Effect Type List

Scratch (DIGITAL SCRATCH) AutoSyn (AUTO SYNTH) TechMod (TECH MODULATION) NoisDly (NOISY MOD DELAY) NoisAmb (NOISE AMBIENT) Jump (JUMP) BeatChg (BEAT CHANGE) Pitch1 (PITCH CHANGE 1) Pitch2 (PITCH CHANGE 2) LoReso (LOW RESOLUTION) Noisy (NOISY) AtkLoFi (ATTACK LOFI) Radio (RADIO) TurnTbl (DIGITAL TURNTABLE) LoFi (LO-FI) LPFiltr (LOW PASS FILTER) HPFiltr (HIGH PASS FILTER) BPFiltr (BAND PASS FILTER) AWah+DS (AUTO WAH + DIST) AWah+OD (AUTO WAH + OVERDRIVE) TWah+DS (TOUCH WAH + DIST) TWah+OD (TOUCH WAH + OVERDRIVE) W+DS+DL (WAH + DIST + DELAY) W+OD+DL (WAH + OVERDRIVE + DELAY) TalkMod (TALKING MODULATOR) 3BandEQ (3BAND EQ) Isolatr (ISOLATOR) Enhance (HARMONIC ENHANCER) VceCncl (VOICE CANCEL) Comp (COMPRESSOR) Comp+DS (COMP + DIST) C+DS+DL (COMP + DIST + DELAY) C+OD+DL (COMP + OVERDRIVE + DELAY) Clip1 (CLIPPER1) Clip2 (CLIPPER2) NoiseGt (NOISE GATE) V-Dist (V-DISTORTION) Dist (DISTORTION) OverDrv (OVERDRIVE) AmpSim (AMP SIMULATOR) DistS (STEREO DISTORTION) OvrDrvS (STEREO OVERDRIVE) AmpSimS (STEREO AMP SIMULATOR) Dist+DL (DIST + DELAY) OvDr+DL (OVERDRIVE + DELAY) Chorus (CHORUS) Chorus2 (CHORUS2) Celeste (CELESTE) Sympho (SYMPHONIC) Detune (ENSEMBLE DETUNE) Flanger (FLANGER) V-Flang (V-FLANGER) Phaser1 (PHASER1) Phaser2 (PHASER2) Tremolo (TREMOLO) FlngPan (FLANGING PAN) FlowPan (FLOW PAN) Rotary (ROTARY SPEAKER) Rot2Way (2WAY ROTARY SPEAKER) 2Rotors (DUAL ROTORY SPEAKER) DS+Rot (DIST + ROTARY SPEAKER) OD+Rot (OVERDRIVE + ROTARY SPEAKER) Amp+Rot (AMP SIM + ROTARY SPEAKER) DS+2Way (DIST + 2WAY ROTARY SPEAKER) OD+2Way (OVERDRIVE + 2WAY ROTARY SPEAKER) Amp+2Wy (AMP SIM + 2WAY ROTARY SPEAKER) AutoPan (AUTO PAN) Dly+Pan (DELAY + AUTO PAN) 3Delay (DELAY L, C, R) 2Delay (DELAY L, R) Echo (ECHO) X-Delay (CROSS DELAY) CtlDly (CONTROL DELAY(MONO)) CtlDlyS (CONTROL DELAY(STEREO)) Ambienc (AMBIENCE) Karaoke (KARAOKE) Eref (EARLY REFLECTION) GateRev (GATE REVERB) RvsGate (REVERSE GATE) Hall (HALL) Room (ROOM) Stage (STAGE) Plate (PLATE) WhiteRm (WHITE ROOM) Tunnel (TUNNEL) Basemnt (BASEMENT) Canyon (CANYON) T-Dly (TEMPO DELAY (MONO)) T-DlyS (TEMPO DELAY (STEREO)) T-XDly (TEMPO CROSS DELAY) T-Flang (TEMPO FLANGER) T-Phase (TEMPO PHASER) T-AWah (TEMPO AUTO WAH) T-Scrch (TEMPO DIGITAL SCRATCH) T-ASyn (TEMPO AUTO SYNTH) T-FgPan (TEMPO FLANGING PAN)

Professional Sampler

Filter Type List
LowPass1 LowPass2 LowPass3 HiPass1 HiPass2 BandPass BandElim Peak1 Peak2 2Peaks 2Dips DualLPFs LPF+Peak DualHPFs HPF+Peak LPF+HPF Low-pass filter #1. (A low-pass filter blocks out all frequencies above the cutoff frequency.) Low-pass filter #2. Offers much higher Q (resonance) than low-pass filter #1. The characteristics of this low-pass filter are somewhere between LowPass1 and LowPass2. High-pass filter #1. (A high-pass filter blocks out all frequencies below the cutoff frequency.) High-pass filter #2. Offers much higher Q (resonance) than high-pass filter #1. Band-pass filter. (Allows only frequencies near the cutoff frequency to pass; blocks out all higher and lower frequencies.) Band-elimination filter. (Blocks out the frequency range around the cutoff frequency, while allowing higher and lower frequencies to pass.) A filter with an emphasis peak at the cutoff frequency. With this filter the original sound is mixed with the sound of the Peak1 filter. A combination of two peaking filters. A combination of two band elimination filters. A combination of two low-pass filters. A combination of a low-pass filter and a peaking filter. A combination of two high-pass filters. A combination of a high-pass filter and a peaking filter. A combination of a low-pass filter and a high-pass filter.

Specifications

Tone generation method Maximum polyphony AWM2 tone generator 126 notes (64 notes on the A4000), 32 multitimbral parts (16 parts on the A4000) 20 bit 64-times oversampling 24 bit 8-times oversampling Rear panel Digital I/O (only when AIEB1 I/O expansion board is installed) Input/output Input frequency Output frequency Sampling frequency Analog input DIGITAL connectors S/P-DIF (coaxial) OPTICAL connectors S/P-DIF (optical) 48 kHz, 44.1 kHz, 32 kHz 44.1 kHz Dimensions 44.1, 22.05, 11.025 kHz, 5.5125 kHz (mono and stereo) Digital input (only when AIEB1 I/O expansion board is installed) 48 kHz, 44.1 kHz, 32 kHz external synchronized recording (stereo only) 1/2, 1/4 and 1/8 undersampling is supported Standard Maximum 4 MB (installed on-board) 128 MB (When four 32 MB 72-pin SIMM modules are installed. The on-board 4 MB are unused only if memory has been expanded to the maximum.) STEREO OUT L/MONO, R (phone jack x 2), ASSIGNABLE OUT L, R (phone jack x 2), MIDI IN-A/B, OUT, THRU-A/B (IN, OUT, THRU on the A4000), SCSI (half-pitch, 50-pin), Expansion board slot, Power supply connector (AC inlet), Fan Two-space rackmount unit W 480 mm x D 461 mm x H 90 mm (18-7/8" x 18-1/8" x 3-9/16") 8.0 kg (17lbs 10oz) Power cable x 1, CD-ROM x 10, DEMO disk x 4, Power cable for internal hard disk (long) x 1, Power cable for Zip drive (short) x 1, SCSI cable for internal hard disk x 1, IDE cable for internal hard disk and Zip drive x 1, Owners manual x 1 AIEB1: I/O expansion board Expansion memory (use a pair of identical-size 72-pin SIMM modules of the following types) Access time 70 ns or less Bit width x 32 (no parity) or x 36 bit (parity) Fast Page or EDO, JEDEC standard Capacity 4 MB/8 MB/16 MB/32 MB Internal hard disk drive (3.5 inch) performance requirements Interface 50-pin SCSI or 40-pin IDE Power supply +5V maximum 840 mA +12V maximum 2400 mA Internal Zip drive Interface 40-pin IDE (ATAPI) Power supply +5V 0.8A Front panel POWER switch, INPUT L,R jacks (phone x 2), REC VOLUME (L& R shared), MASTER VOLUME (L&R shared, STEREO OUT & PHONES shared), PHONES OUTPUT jack, Knobs (1 - 5), Mode buttons (PLAY, EDIT, REC, DISK, UTILITY), Function buttons (six buttons), Command/Exit button, Assignable button, Audition button, LCD (320 x 80 dot, LED backlight), LCD contrast control, 3.5" 2HD/2DD dual mode floppy disk drive
A/D conversion D/A conversion

Weight Included items

Internal sample memory capacity
Options (made by Yamaha) Internal expansion devices (made by other manufacturers)

Sampling time

Maximum sample length
32 MB monaural 64 MB stereo Maximum sampling time (mono or stereo) 6 minutes 20 seconds (44.1 kHz) 12 minutes 40 seconds (22.05 kHz) 25 minutes 21 seconds (11.025 kHz) 50 minutes 43 seconds (5.5125 kHz) 6 effect blocks (3 on the A4000), Total equalizer (4 bands), Sample equalizer 128 programs Realtime recording and playback

Effects Program Sequencer
Specifications are subject to change without notice. All trademarks and registered trademarks are the property of their manufacturers.
For details please contact:
A New Breed of Sampler Is Born
T h e A / A S a m p l e r s T h a t R e v o l u t i o n i z e S a m p l i ng

ISO9001 JQA-1868

This document is printed on chlorine-free (ECF) paper.

LCK9906

991110 Printed in Japan
The A5000/A4000Samplers That Revolutionize Sampling
Ever since the introduction of sampling technology, virtually every rackmount sampler on the market has been just thata samplerand nothing more. Sure there have been advancements in sound quality and the addition of digital effects, but the basic concept has remained the same.UNTIL NOW. Announcing the arrival of the revolutionary A5000/A4000professional samplers with the power not only to create sounds, but to shape them in a way never before dreamed possible. Of course the A5000/A4000 have impressive specs for a sampling unit. Both models are expandable with up to 128 MB of RAM and can accommodate an Internal Hard Drive and Internal Zip Drive simultaneously. The A4000 provides 16 Multitimbral Parts and 64 Notes of Polyphony, while the A5000 gives you nearly double the power with 32 Multitimbral Parts and 126 Notes of Polyphony. And for ultimate flexibility and convenience, these samplers are compatible with a wide range of sample formats, including AIFF and WAV among others, and are bundled with special Sample and Parameter Editing Software. But the A5000/A4000 are not merely samplersthey are advanced synthesis tools that let you process samples creatively.and easily. Both models provide abundant features for versatile sound production: 16 Types of Ultra Fat Filters that deliver powerful resonance, 96 Types of Effects for creating never-before-heard sounds, a MIDI Syncable LFO with fully programmable waveforms, unprecedented Loop Divide/Remix and Resampling functions, Direct-to-CD Burning capability and much, much more! And with their Large LCD Panel, heavy-duty Realtime Control Knobs and Intuitive User Interface, these samplers are incredibly easy to operate, allowing you to give full concentration to creating your own unique sounds and music.

Powerful Filter Section

The A5000/A4000 feature an elaborate filter stage, providing 16 different filter types with complete control over the parameters. Many filter types feature a Q (resonance) setting that can be controlled by keyboard velocitygreat for creating expressive acid leads and basses. Along with the standard lowpass, high-pass and band pass filters, these samplers feature many unusual filters such as band eliminate, peak, and dip filters. Also included are several unique multi-mode filters, which let you assign two independent filters to a single sample; a low-pass and high-pass filter for example.

Filter & EQ Edit screen
An Indispensable Tool for Dance Music Remixing & Production
If youre into sequencing or remixing dance tracks, youll find the A5000/A4000 are a dream come true. Packed in these samplers is an extensive array of sample editing functions that are ideal for todays dance music.
Realtime MIDI Control Knobs (Panel Play)
By selecting the Panel Play function, the A5000/A4000's four right panel knobs become realtime MIDI controllers, allowing you to tweak the sound of the internal samples as well as control external MIDI synthesizers. You can even record the MIDI control data transmitted by each knob into an external sequencer and have all the changes play back automatically.
Sound Library and Software CD-ROMs Included
Bundled with the A5000/A4000 is a 9-set collection of CD-ROMs packed with samples ranging from hip-hop and break-beat rhythms to finely recorded orchestral instruments. Also included is a software CD-ROM that contains parameter-editing and sample-editing applications for both Mac and Windows.

TWE Wave Editor

TWE is a comprehensive hard disk recording and editing package that lets you graphically edit and process sound files. You can import/export sound files directly to and from the A5000/A4000 via SCSI connection as well as record sound to hard disk from any audio source.
Note: A sound card with audio inputs is required for hard disk recording.

s Loop Divide/Remix

The Loop Remix function divides a sample loop into discrete sections according to preset patterns, and then randomly rearranges their timing and order, while adding reverse, pitch, lo-fi and gate effects in the process. The result is a totally unique, remixed loop. With this function you can instantly create awesome break-beat fills, hip-hop shuffles, and electro grooves.all at the touch of a button. Plus, the remixing process is non-destructive, which means you can freely make as many remixed loops as you want without affecting the original sample. Whenever you come up with a remixed loop that you like, you can store Loop Remix Edit screen the randomly generated pattern that created it as a User Type for later use. The Loop Divide function automatically slices a sample loop into several parts according to the beat, while simultaneously assigning each part to a different note. This allows you to compose your own remixes by playing the sample parts manually on a MIDI keyboard.
Consecutive Sampling Function
Have you ever wanted to borrow a friends drum machine and sample all of its sounds? Or perhaps sample several tracks off of a sampling CD? With conventional samplers, recording multiple sounds in a row can be extremely time consuming since you must go through the sampling setup procedure each time you want to record a new sound. With the A5000/A4000s Consecutive Sampling function, however, you can make as many samples as you want, one by one, without pressing any buttons between samples! Just set the Record Type to New+ and press GOthe A5000/ A4000 will create a new sample every time an audio signal is detected and automatically pause once the signal stops. Samples will be mapped out automatically in the order that they were recorded, saving you even more time and effort.

Filter type examples

Low Pass 3

2 Peaks

2 Dips

Peak 2

Ready to Expand to Your Exact Needs
The A5000/A4000 provide impressive expansion capability to cater to your exact sampling needs. Both models are equipped with a SCSI interface, allowing you to connect an external hard drive or CD-ROM drive for quick and easy loading of sample data. And if portability is a concern, you can easily install an internal hard disk drive (50-pin SCSI or 40-pin IDE) or replace the floppy disk drive with a Zip drive (ATAPI) using the provided connection cables. The onboard sampling memory can be expanded up to an incredible 128 megabytes using pairs of standard 72-pin SIMMs. And for professional-level music production, the optional AIEB1 I/O expansion board provides 6 individual audio outputs (in addition to the 4 audio outputs already on the unit) as well as both optical and coaxial digital I/O capability. Zip is a trademark of Iomega Corporation.
YAMAHA AIEB1 Optional I/O Expansion Board

Dual Low Pass

Low Pass + Peak

High Pass + Peak

Low Pass + High Pass

s Resampling

Once you get your hands on the A5000/A4000s Resampling function youll be amazed at how easy and convenient it is to match the pitch and tempo of your samples to the rest of your sequenced tracks. Pitch Convert mode lets you change the pitch of a sample without altering the speed. Time Stretch mode lets you change the speed of a sample without Time-Stretch Execute screen altering the pitch. Speed variations can be calculated based on tempo, length, beat or time, according to your preference. If you like to compose tracks by sampling rhythm loops from multiple sources, Resampling is a function you cant do without.
96 Outstanding Onboard Effects
The A5000/A4000 are not just high-quality samplers, theyre also highly advanced digital multi-effect processors, exceeding the capability of many professional stand-alone effect processors. The A5000 gives you 6 blocks of effects and the A4000 gives you 3. Each effect block can be assigned any one of the 96 onboard effect algorithms, which include a huge selection of reverbs, distortions, modulation effects and delays, as well as several truly unique effects such as Auto Synth, Tech Modulation, Digital Scratch and an extensively programmable Lo-Fi effect. Most effect types can be applied during the sampling process combine this capability with the Resampling function and youll have virtually endless effect processing power at your fingertips. You can even have the A5000/A4000 double as a high-end studio effects processor by assigning effects to the stereo analog inputs.
A5000 Effect Setup screen
Waveforms are graphically displayed on your computer screen, allowing you to easily select and edit any part of a sound file.

A complete set of editing functions are provided, including cut and paste, normalize, time compression/expansion, pitch shift, reverse and EQ.
After editing a sound file, you can convert the sampling rate, change the bit size and save the data in AIFF or WAV format.

A5000/A4000 Editor

The A5000/A4000 Editor makes editing your samples incredibly easy by letting you visually change the parameters on your computer screen. All changes are sent to the A5000/A4000 via MIDI in realtime, so youll be able to instantly hear the results of any edits you perform.
s MIDI Syncable LFO with Programmable Waveforms
A4000 Effect Setup screen
Not only do the A5000/A4000 feature independent LFOs for each sample, but also a master Program LFOa MIDI syncable LFO exclusively for samples assigned to the Program setup. By setting the cutoff modulation source of any sample to Program LFO, you can have the cutoff frequency sweep according to the rate and waveform of the LFO. StepWave Setup screen StepWave, one of the 6 Program LFO waveforms, expands your modulation capability by allowing you to set up to 16 steps within an LFO cycle to control the modulation effect. You can program the modulation level of each step yourself, or have the A5000/A4000 randomly generate the waveform for you. You can even smoothen the waveform by adding slopes between each of the steps.
Example Program LFO Waveforms
Sine Saw Triangle Square S/H (Sample and Hold) StepWave Ex. 1 (User Program) StepWave Ex. 2 (Random with Slope)

72-pin SIMMs

3.5" Hard Disk Drive

Zip Drive

This photo is for illustrative purposes only. Necessary wire connectors are not shown.
Direct-to-CD Burning Capability
The A5000/A4000 allow you to connect a CD-R or CD-RW drive directly to their SCSI port and back up the contents of your hard drivewithout the need for a computer. Not only does this provide a cost-effective way to store your projects, but it also allows you to effortlessly produce your own audio sampling CDs.

POWER POWE

The Memory List Window lets you see at a glance all the programs, sample banks and sample files in your A5000/A4000. You can select any of these for editing by simply double-clicking on the listed name.

The Program Edit Window lets you quickly edit the parameters related to the A5000/A4000 Program setup, such as effects setup, MIDI channel assignment and Program LFO.
The Sample Edit Window displays all the parameters related to the sample banks and sample files in your A5000/A4000. Drag the sliders with your mouse or enter values directly with your keyboard. By clicking the on-screen keyboard, you can play back the sample as you are editing it.
TOOLS for the A5000/A4000
Windows95/98 XGWorks lite V3.0 A5000 Editor A4000 Editor A5000 Editor A4000 Editor YAMAHA Wave Editor TWE V2.2 YAMAHA Wave Editor TWE V2.2 Acrobat Reader 4.0 YAMAHA CBX Driver Acrobat Reader 4.0 OMS 2.3.6 OMS Setup for YAMAHA devices

CRW6416SX

Macintosh
A 12-step user-programmed StepWave LFO pattern. Setting each step within the LFO cycle is similar to programming an analog sequencer. An 8-step StepWave LFO pattern randomly generated by the A5000/A4000.
Compatibility with a Broad Range of Sample Formats
The A5000/A4000 have the ability to import and export AIFF and WAV files directly to and from any DOS-formatted floppy disk, hard disk or Zip disk, as well as import from CD-ROM. Plus they are compatible with sample files from other Yamaha samplers such as the highly acclaimed A3000 and SU700, as well as compatible with various sample formats used by other manufacturers, thus giving you the support of a vast library of sounds.
Supported Formats for Import EX7/5/5R
Voices (from FD, HD, non-LPC RAM samples only) Waves (from FD, HD, non-LPC RAM samples only)
Audio Data (samples) 98 Tracks
Professional Studio Library Standards CD-ROM
This CD-ROM contains a superb-sounding collection of acoustic and electrically amplified instruments. Included is a wide variety of grand pianos, organs, brass, strings, woodwinds, guitars, drums and moreall the essentials on one fantastic disc!

Intuitive User Interface

Navigating through the various functions is remarkably easy thanks to the A5000/A4000's intuitive user interface. Simply select a Mode and Function from the front panel matrix and the parameters associated with that function will be clearly displayed on the bright, easy-to-read 320 x 80 LCD panel. Five panel knobs allow you to open pop-up menus, select values and execute operations quickly and conveniently.

Function Buttons

AIFF File
8/16-bit linear, mono/stereo,.AIF extension (from DOS-format FD, HD, or ISO9660-format CD-ROM)
Professional Studio Library CD-ROM x 8
This professional 8-disc sound library features programs developed by some of the worlds foremost music producers and sound designers. On these discs youll find an enormous selection of sample programs, from a complete collection of musical instruments to a vast assortment of synthesizers and sample loops tailored to todays dance music scene. Specially designed for use in demanding audio production applications, these CD-ROMs boast sound quality thats nothing short of amazing.
Filter List Pop-up Menu screen

Samples (from FD, HD)

Note: Except segmented data stored on multiple floppy disks.

Standard MIDI File

Format 0,.MID extension (from DOS-format FD, HD, or ISO9660-format CD-ROM)

Samples (from FD)

Sample Data of Other Manufacturers
The following data can be imported via floppy disk, hard disk or other storage medium: Akai S1000 or S3000 programs and samples; E-mu EIIIx presets and samples; and Roland S760 patches or samples (data may not load properly in some cases).
Note: The product and company names listed above are trademarks or registered trademarks of the respective manufactures.

WAV File

Mode Buttons
8/16-bit linear, mono/stereo,.WAV extension (from DOS-format FD, HD, or ISO9660-format CD-ROM)
The contents of Real Drums, World/Latin Instruments, and DJ/Producer Tool Kit are essentially the same as the The Yamaha Real Drum Library, World Beat, and DJ/Producer Toolkit CD-ROMs for the A3000, respectively, distributed by YAMAHA MusicSoft Europe Ltd. The contents of Syntraxx/Loops is essentially the same as the Syn Traxx CD-ROM for the A3000 distributed by YAMAHA Europa GmbH.

Volume: A4000/A5000 Importing Data

A4000/A5000 IMPORTING

Power User
A3000 files load directly native format *Non-LPC only (LPC is a compression scheme) **Single FD diskette (not from multiple floppy volumes) [DISK]> [F5] DISK> Disk page. Select the drive and/or partition containing the data. You can navigate folders on the drive via the UP and DOWN soft-knobs. When you have located the folder press [F6] IMPORT The layout of the data may vary from CDROM to CDROM.
Guide: Compatibility / Importing
The compatibility issue is very important to the end user looking for a pre-made library. Be aware of the situation with samplers that each company has a different operating system, even though the technology that creates the samples is basically the same. This means that when attempting to import data from one system to another you may have to do some minor adjustments. This is part of sound design. With samplers you are often called on to adjust libraries to your own needs. Fortunately, the Aseries comes with a tremendous amount of native format data (9 CDROMs). Much more than most customers buy during the life-cycle of the product. Usually, when a sampler claims compatibility with a particular format you can expect the basic sample data to either load or be imported into the sampler. This will include the sample, the key mapping and the loop point. It is 100% infallible? Of course, not. Should you expect the envelopes, filters, etc., to be exactly the same? Of course, not. Be prepared to do at least some tweaking in any compatible situation. Musical instrument sounds need the most. Breakbeats hardly ever need tweaking. That said, you will be amazed at the ability of the A4000 and A5000 has in importing and improving the sound of other native formats: Akai, Emu, Roland, Yamaha, AIFF and Wav. Compatibility details (import): Akai S1000/S3000 via FD/HD/CDROM import w/mapping Emu E111x via HD/CDROM import w/mapping Roland S760 via HD/CDROM import w/mapping AIFF via DOS FD/HD/CDROM import/export, CDROM import only* WAV via DOS FD/HD/CDROM import/export, CDROM import only** EX via FD/HD import w/mapping* SU700 via FD/HD import w/mapping** TX16W FD import sample
Importing Data from other Yamaha Products
You can import EX5 data from floppy disk or from HD (Zip or Jaz). You cannot, however, import EX data from CDROM. If you have an EX CDROM, you must copy that data from the CDROM to a connected HD then you can import the data into the A5000/A4000. Data that was compressed before saving via LPC process cannot be imported into the samplers. All SU700 sample data can be imported, except data that was saved across multiple floppy disks.

Food for Thought

The A4000/A5000 can archive its data to a CDR or CDRW via SCSI. All you need is a device like the Yamaha CRW8416SX. This means that you can actually create native format CDROMs that are your own personal edits. You can also burn your own audio CDs thats right, red book compatible audio CDs that will playback on any common CD player. For the small project studio this is a powerful tool to add to the arsenal. The sampler writes audio CDs directly from a connected, A4000/A5000 formatted hard drive. In the home project studio, make the target of your mixdown the audio inputs of the A5000/A4000 sampler or sample from DAT. Simply create a stereo sample of the data you wish burn. You can create a list of files to burn and you are in business. By the way, the AIEB1 (six analog outputs, S/P-DIF in/out, Optical in/out) is $249.95 (MSRP).