1.4 (1/16")

s SPECIFICATIONS

AV-S70

s AMPLIFIER SECTION

Minimum RMS Output Power per Channel Front (1kHz, 10% THD, 6).. 30W + 30W Signal to Noise Ratio (IHF-A-Network) TV... 85dB Total Harmonic Distortion (1kHz) TV to Speaker Out, 12.5W/6.. 0.08% Input Sensitivity/Impedance TV... 200mV/50k

NX-SW70

Minimum RMS Output Power per Channel Rear (1kHz, 10% THD, 6).. 30W + 30W Sub Woofer (100Hz, 10% THD, 4). 50W
s REAR SPEAKER SECTION (NX-AVS70)
Type... Closed cabinet type Speakers.. 8cm (3-1/8) cone (Magnetic-Shielding Type) Maximum Power Handling Capacity.. 30W Impedance... 6 Dimensions (W X H X D). 100 X 140 X 113mm (3-15/16 X 5-1/2 X 4-7/16) Weight... 0.7kg (1 lbs. 8 oz) Finish.. Gray color

s SPEAKER SECTION

Type... Bass reflex type Speakers.. 8cm (3-1/8) cone x 2 (Magnetic-Shielding Type) Maximum Power Handling Capacity.. 30W x 2 Impedance... 6
s SUB WOOFER SPEAKER SECTION (SW-AVS70)
Type.. Advanced Active Servo Technology type Speakers... 16cm (6-5/16) cone (Magnetic-Shielding Type) Maximum Power Handling Capacity.. 50W Impedance... 4 Dimensions (W X H X D). 200 X395 X 399mm (7-7/8 X 15-9/16 X 15-11/16) Weight... 9.7kg (21 lbs. 6 oz) Finish.. Gray color

s GENERAL

Power Supply.. AC230V, 50Hz Power Consumption... 68W Dimensions (W X H X D). 600 X110 X 243mm (23-5/8 X 4-5/16 X 9-9/16) Weight... 7.0kg (15 lbs. 7 oz) Finish.. Gray color Accessories.. Pin Cord (RCA) X 1 Remote Control Transmitter X 1 Battery (size AAA, R03) X 4 Fastener Tape X 2
Power Supply.. AC230V, 50Hz Power Consumption... 80W Accessories.. System Cord (DIN plug) X 1 Speaker Cable (15m) X 2 Wall Bracket X 2 Bracket X 2 Wing Bolt X 2 Screw X 2
* Specifications subject to change without notice.
G. European model B. British model
* TruBass and the symbol are trademarks of SRS Labs, inc. in the United States and selected foreign countries. TruBass technology is incorporated under license from SRS Labs, inc. Manufactured under license from Dolby Laboratories. "Dolby", "Dolby Digital", "Pro Logic", and the double-D symbol V are trademarks of Dolby Laboratories. 19921997 Dolby Laboratories. All rights reserved.
s AV-S70 DISASSEMBLY PROCEDURES
1. Removal of Grille Assembly. a. Push up the Grille Assembly with a flat tip screwdriver or the like inserted from the bottom. (Fig. 1). b. Keep pushing up the Grille Assembly gradually until it can be removed.

* The Grille Assembly is fixed securely at 8 dowels. When removing it, use care not to cause a scratch or any damage to the main unit. When reinstalling it, apply quickdrying type bond to the dowels of the Grille Assembly and fit it in place securely. (If it is only pushed in, it will come off easily.)

Bottom

(Remove parts in the order as numbered.)
2. Removal of Amplifier Unit a. Remove 4 wing screws (q) and then remove the Plate Legs (right and left). (Fig. 2) b. Remove 4 screws (w). (Fig. 2) c. Remove 7 screws (e) and then remove the Amplifier Unit. (Fig. 2)
* Arrow marks are printed to identify the screws to be removed.

Amplifier Unit

Plate Leg

q q e w

Plate Leg Grill Assembly

q Fig. 2

Fig. 1
s SW-AVS70 DISASSEMBLY PROCEDURES
a. Removal of Grille Assembly. a. Push up the Grille Assembly with a flat tip screwdriver or the like inserted from the bottom. (Fig. 3). b. Keep pushing up the Grille Assembly gradually until it can be removed.
* The Grille Assembly is fixed securely at 6 dowels. When removing it, use care not to cause a scratch or any damage to the main unit. When reinstalling it, apply quick-drying type bond to the dowels of the Grille Assembly and fit it in place securely. (If it is only pushed in, it will come off easily.)
2. Removal of Amplifier Unit a. Remove 14 screws (r) and then remove the Amplifier Unit. (Fig. 4)

Grill Assembly

Fig. 3

Fig. 4

s TEST PROGRAM MODE (AV-S70)
1. Procedure for starting Test Program With the power turned off, press the POWER key while pressing the VOLUME key and the DSP key simultaneously. This initiates the Test Program function. When the Test Program is initiated, 01 DEST-Ex appears on the FL display. 2. Procedure for selecting and executing Test Program Using the VOLUME + (UP) key and Volume - (DOWN) key, select the Test Program and then press the INPUT key to execute it. 3. Procedure for canceling Test Program There are two methods for cancellation. a. Turn off the power by pressing the POWER key of the main unit or the remote controller. b. Select the Test Program 01 DEST-Ex and press the INPUT key for execution. (The normal mode will be restored.)
4. Details of the Test Program function Display Function Destination display/ test program end

01 DEST-B,G1

Destination display J:Ja J:En B,G1 J (Japanese) J (English) B, G models

02 FL+CLEAR

FL display segments all light up / BACKUP RAM CLEAR 1st time: FL display segments all light up and standby LED lights up. 2nd time: RAM CLEAR is executed (RAM CLEAR OK on display) * State before shipped out of the factory preset.

03 FL CHECK

FL display light-up check 1st time: FL display segments all light up and standby LED lights up. 2nd time: Even number segments and digits light up. 3rd time: Odd number segments and digits light up.

1st time

VIRTUAL TRUBASS

2nd time

TRUBASS ENHANCED SURROUND PRO LOGIC

3rd time

V DIGITAL ENHANCED V SURROUND V PRO LOGIC DSP

Display

Function The DSP DIAG (self-diagnosis) mode is initiated. (Refer to page 7 for the details.)

04 DSP Diag 05 Ver-A1.08

Microprocessor version / date display Example of microprocessor display 05 Ver-A1.'99.10.15
Example of microprocessor date display
What is displayed varies depending on the microprocessor software.
06 SUM[47a0] 07 PrCan-OFF 08 Pr!CPS
Check sum calculation display / re-calculation
All protection cancellation function ON/OFF
Protection operation history display / clear C: Center unit amplifier voltage P: Power circuit voltage S: Switch side : Normal x: Abnormal

09 Cors- St.

ROM collection (EEPROM) check sum calculation/calculation start When there is a data in the ROM collection area of EEPROM: Example of display *

09 Cors-288b

When there is no data, NON appears on the display. The ROM collection (EEPROM) is utilized to cope with the data area for backup and microprocessor bugs partially. The backup memory for the sound field or the like will be retained semi-permanently even when the plug is disconnected. No data is written in the parts mounted on the product as single units.

10 COR-Clear

ROM collection (EEPROM) data clear / clear start Display is provided only when there is data in the ROM collection area of EEPROM 1st time: Data clear confirmation (Clear-ON? displayed) 2nd time: Data clear execution (Clear:OK! displayed) Clear-ON? After Clear-ON? is displayed, do not use INPUT key for execution Clear-ON? (because the program contents will be erased). Using VOLUME + (UP) key and VOLUME - (DOWN) key, select another test * program. The IC for ROM collection has a role to help the microprocessor be upgraded. If the written data is cleared, the old version will be restored.

DECODER

L/R L/R L/R

CODEC.DA

REAR L REAR R

DIGITAL IN

YM3436

CENTER LFE

256K SRAM

AUX IN VOLUME

20dBV, Both ch MAX

CN102 (Page 30, C-4)
MAIN L (1kHz) MAIN R (1kHz) LFE (30Hz) REAR L (1kHz) REAR R (1kHz) : : : : : 20dBV 20dBV 34dBV 26dBV 26dBV
The shaded square means that the element included in it does not operate.

DSP 0dB

The main L/R, C/LFE, RL/RR signals pass through the DSP section.
MAIN L MAIN R REAR L REAR R

2. DSP Through

In the DIGITAL input mode, AC3/PCM AUDIO signal is automatically identified. There are 3 sub-menu items. YSS908-SRAM The main L/R signal is sent through AC3D2av into DSP. After passing through SRAM, the main L/R signal is output through L+R and C/LFE and RL/RR signals through (L+R)/2.

(L+R) (L+R) /2 (L+R) /2

YSS908-SRAM The main L/R signal is sent through AC3D2av into DSP. The main L/R signal is output through L+R and C/LFE and RL/RR signals through (L+R)/2.
DSP FULL BIT The main L/R is input through AC3D2av to DSP and then output through all channels. The head margin is eliminated and the digital data is output in digital full bit. The same applies as YSS908 except that the digital data is output in full bit at D/A.
AUX IN VOLUME : : 20dBV, Both ch MAX
MAIN L (1kHz) MAIN R (1kHz) LFE (30Hz) REAR L (1kHz) REAR R (1kHz) : : : : : 11dBV 11dBV 13dBV 17dBV 17dBV
Full bit: The digital data is normally output with a head margin for each of C and RL/RR channels. In this menu, no head margin is used and the digital data is output in full bit so as to obtain the A/D and D/A characteristics fully. Note that this means the analog gain after D/A is larger as compared to L/R. Also, the LFE channel also outputs the signal in full bit.

3. AC-3 Through

Only the signal of the digital system is input. The AC3 signal is decoded and reproduced according to the input source. The AC-3 signal in each channel is AC-3 decoded and output through AC3D2av. The combined status information of the sampling frequency and the number of channels of the AC3 signal appears on the Fl display.

L/R C/LFE LS/RS

MAIN L MAIN R CENTER LFE
DOLBY DIGITAL or C/LFE PRO LOGIC LS/RS

Status information

AC3 44.1k 2/0
Sampling frequency Number of channels
Sampling frequency Analog 32kHz 44.1kHz 48kHz
(Display) Analo 32k 44.1k 48k
Number of channels (Front/Rear) (Display) 1+1 1+1 1/0 1/0 2/0 2/0 3/0 3/0 2/1 2/1 3/1 3/1 2/2 2/2 3/2 5.1ch 3/2 7.1 (DTS) 7.1
As signal identification is executed in normal AC-3 reproduction, the source (DAT, CD-ROM, etc) without digital data bit of IEC958 cannot be reproduced even when it is AC-3 encoded. On the other hand, as this menu does not execute such digital data bit identification, these sources can be AC-3 reproduced. (To measure characteristics during AC-3 reproduction, use the AC-3 decoded sine wave.) However, note that with the sources that have not been AC-3 encoded, a decode error occurs and muting is applied. In addition, by displaying the combined status information of the sampling frequency and the number of channels of the AC-3 signal on the FL display, malfunction of the decoder can be detected.

4. Pro Logic

The sub-menu items include selection of Pro-logic (The auto input balance is off.) and EFFECT OFF.
CENTER LARGE When the analog, PCM audio or AC-3 2/0 mode is used, L, R, C, S signals are prologic decoded and output. When the AC-3 mode other than 2/0 is used, the pro logic function does not work and the signals are AC-3 reproduced.

CENTER

DOLBY DIGITAL or PRO LOGIC

20dBV, L ch only MAX

MAIN L (1kHz) MAIN R (1kHz) LFE (30Hz) REAR L (1kHz) REAR R (1kHz) : : : : : 20dBV 20dBV 28dBV < 45dBV < 45dBV
MAIN L (1kHz) MAIN R (1kHz) LFE (30Hz) REAR L (1kHz) REAR R (1kHz) : : : : : 20dBV < 45dBV 32dBV < 45dBV < 45dBV
EFFECT OFF The L/R signal is output through MAIN BYPASS.
5. Speakers Set (for reference only)
This menu is for checking during the production process and not for servicing. The input L/R signal is output through the specified channels according to the sub-menu. There are 7 sub-menu items. The signal output from the DSP section is normally in the EFFECT OFF state in the menus from 1 to 3. In the menus after that, the same signal as in the menu of 2. DSP THROUGH: YSS908 is output. The analog switch settings in each sub-menu are as shown in the following table.

Output Sub-menu 7 MAIN : SMALL 0dB MAIN : LARGE 0dB LFE/BASS : MAIN LFE/BASS : MAIN LFE/BASS : SUBWOOFER CENTER : NONE CENTER : SMALL REAR : SMALL CENTER : NONE CENTER LARGE LARGE NONE LARGE LARGE NONE SMALL REAR LARGE LARGE LARGE LARGE LARGE LARGE SMALL MAIN SMALL LARGE LARGE LARGE LARGE LARGE LARGE MAIN LEVEL LFE/BASS MAIN L 0dB 0dB 0dB 0dB 0dB 0dB 0dB SWFR SWFR MAIN MAIN SWFR SWFR SWFR L L L LFE+FL X C+FL FL MAIN R R R R LFE+FR X C+FR FR CENTER REAR L X X X X X X C X X X X X X RL REAR R X X X X X X RR SUBWOOFER L+R X X X LFE X C+RL+RR+LFE
* In Sub-menu 1, the lower range content of the MAIN L/R is output at SWFR as well. * In Sub-menu 7, the lower range content of LFE, CENTER and REAR is output at SWFR as well.
LARGE: Signals are output in all bandwidths. SMALL: Only signals lower than 90Hz are mixed in the channel specified by LFE/BASS. NONE: The center contents are distributed to the MAIN L/R channels after -3dB. SWFR: SUBWOOFER Output: The signal before MASTER VOLUME is indicated.
Sub-menu MAIN : SMALL 0dB MAIN : LARGE 0dB LFE/BASS : MAIN LFE/BASS : MAIN LFE/BASS : SWFR CENTER : NONE CENTER : SMALL REAR : SMALL CENTER : NONE
Main application Confirmation of high/low pass filter characteristics and gain when BASS REDIRECTION is used. Reference for Sub-menu 1 and 2 Confirmation of effect of the mix circuit to the main channel. Confirmation of gain of BASS MIX. Confirmation of the maximum output of LFE. Confirmation of gain of CENTER MIX. Confirmation of high/low pass filter characteristics and gain when BASS REDIRECTION is used.

6. Effect Off

All effect functions are turned off.

7. Manual Test

The test noise is output by the noise generator with a built-in DSP through the channels specified by the sub-menu. ALL MAIN L Noise is output through all channels. Noise is output through the MAIN L channel.
CENTER Noise is output through the CENTER channel. MAIN R Noise is output through the MAIN R channel. REAR R Noise is output through the REAR R channel. REAR L Noise is output through the REAR L channel. LFE Noise is output through the LFE (sub-woofer) channel.

8. No function

9. DIAG cancel
The DSP DIAG is canceled.

s AV-S70 IC DATA

IC701 : M30218FCFP (16 bit -COM)
P50/FLD8 P51/FLD9 P52/FLD10 P53/FLD11 P54/FLD12 P55/FLD13 P56/FLD14 P57/FLD15 P00/FLD16 P01/FLD17 P02/FLD18 P03/FLD19 P04/FLD20 P05/FLD21 P06/FLD22 VSS P17/FLD23 VCC P10/FLD24 P11/FLD25 P12/FLD26 P13/FLD27 P14/FLD28 P15/FLD29 P16/FLD30 P17/FLD31 P20/FLD32 P21/FLD33 P22/FLD34 P23/FLD35
P67/FLD7 P66/FLD6 P65/FLD5 P64/FLD4 P63/FLD3 P62/FLD2 P61/FLD1 P60/FLD0 VEE P107/AN7 P106/AN6 P105/AN5 P104/AN4 P103/AN3 P102/AN2 P101/AN1 AVSS P100/AN0 VREF AVCC

99 100

P24/FLD36 P25/FLD37 P26/FLD38 P27/FLD39 P30/FLD40 P31/FLD41 P32/FLD42 P33/FLD43 P34/FLD44 P35/FLD45 P36/FLD46 P37/FLD47 P40/FLD48 P41/FLD49 P42/FLD50 P43/FLD51 P44/TXD0/FLD52 P45/RXD0/FLD53 P46/CLK0/FLD54 P47/CTS0/RTS0/FLD55

No. 21 22

PORT P97 P96 P95 P94 P93 P92 P91 P90 CNVSS P87 P86 RESET XOUT VSS XIN VCC P85 P84 P83 P82 P81 P80
Name CMOS CMOS CMOS CMOS CMOS CMOS CMOS CMOS CMOS CMOS INT5 INT4 (INT3) (INT2) INT1 INT0
P97/DA0/CLKOUT/DIMOUT P96/DA1/SCLK22 P95/SCLK21 P94/SOUT2 P93/SIN2 P92/SSTB2 P91/SBUSY2 P90/SRDY2 CNVSS P87/XCIN P86/XCOUT RESET XOUT VSS XIN VCC P85/INT5 P84/INT4 P83/INT3 P82/INT2 P81/INT1 P80/INT0 P77/TA4IN/TA2OUT/CTS1/RTS1/CLKS1 P76/TA3IN/TA1OUT/CLK1 P75/TA2IN/TA0OUT/RXD1 P74/TA1IN/TA4OUT/TXD1 P73/TA0IN/TA3OUT P72/TB2IN P71/TB1IN P70/TB0IN
IN/OUT OUT OUT OUT OUT OUT OUT OUT OUT OUT OUT INT-IN INT-IN IN IN INT-IN INT-IN
Function BASS BOOST OUT Center unit, RL,RR,SW MUTE OUT (DSP) SERIAL/CODEC CLK OUT (DSP) SERIAL/CODEC DATA OUT (DSP) DIR2 CCK (DSP) DIR2 CLD (DSP) AC3D CE1 OUT (DSP) AC3D CE2 OUT Connected to VSS (GND) via a resistance (5.1k) Switching of analog input selector (4052) to A OUT Switching of analog input selector (4052) to B OUT RESET 10 MHz IN (Feedback resistance included) GND 10 MHz IN (Feedback resistance included) +5V power supply (DSP) DIR2 ERR IN (DSP) AC3D MUTE IN (DSP) DIR2 CD0 IN Center unit amplifier voltage detect IN (Protection) Remote controller IN Power down DC detect IN
[0:ON] [0:MUTE ON] (SCK) (SDT) (CCK) (CLD) (CEAC1) (CEAC2) AB [00:GND 01:TV ] [10:AUX 11:VCR] [0:RESET]
(ERRD) (ERRA) (CD0) [0: abnormality exists] [0:POWER DOWN]
No. 77 PORT P77 P76 P75 P74 P73 P72 P71 P70 P47 P46 P45 P44 P43 P42 P41 P40 P37 P36 P35 P34 P33 P32 P31 P30 P27 P26 P25 P24 P23 P22 P21 P20 P17 P16 P15 P14 P13 P12 P11 P10 VCC P07 VSS P06 P05 P04 P03 P02 P01 P00 P57 P56 P55 P54 P53 Name CMOS CLK1 RxD1 TxD1 CMOS CMOS CMOS CMOS CTS0 CLK0 RxD0 TxD0 P-OD P-OD P-OD FLD47 FLD46 FLD45 FLD44 FLD43 FLD42 FLD41 FLD40 FLD39 FLD38 FLD37 FLD36 FLD35 FLD34 FLD33 FLD32 FLD31 FLD30 FLD29 FLD28 FLD27 FLD26 FLD25 FLD24 FLD23 FLD22 FLD21 FLD20 FLD19 FLD18 FLD17 FLD16 FLD15 FLD14 FLD13 FLD12 FLD11 IN/OUT OUT S-CLK S-IN S-OUT OUT OUT OUT OUT OUT S-CLK S-IN S-OUT OUT OUT IN OUT OUT OUT OUT OUT OUT OUT OUT OUT OUT OUT OUT OUT OUT OUT OUT OUT OUT OUT OUT OUT OUT OUT OUT OUT OUT OUT OUT OUT OUT OUT OUT OUT OUT OUT OUT OUT OUT Function (DSP) /IC AC3D OUT (/ICAC) (DSP) AC3D CLK OUT(CLKAC) (Serial I/O-1) (DSP) AC3D DATA IN(RXAC) (Serial I/O-1) (DSP) AC3D DATA OUT(TXAC) (Serial I/O-1) (DSP) CODEC CE OUT (CECOD) Analog switch (LC78212) CE OUT [0: Address 1: Data] Electronic VR (TC9482) STB OUT [1:ON] CE OUT to E2PROM [1: DATA transfer] TruBass Switching OUT/Busy OUT to flash writer [1:ON] LC78212/TC9482/CLK OUT to E2PROM/CLK IN from flash writer (Serial I/O-0) DATA IN from E2PROM/DATA IN from flash writer (Serial I/O-0) LC78212/TC9482/DATA OUT to E2PROM/DATA OUT from flash writer (Serial I/O-0) SW primary power supply relay control OUT [0:ON] 6ch speaker relay control OUT [1:ON] SW PRE OUT in use/unused IN [1: in use] STANDBY LED OUT [1: light up] DIGIT 13 (13G) [VEE external pull-down required] DIGIT 12 (12G) [VEE external pull-down required] DIGIT 11 (11G) [VEE external pull-down required] DIGIT 10 (10G) [VEE external pull-down required] DIGIT 9 ( 9G) [VEE external pull-down required] DIGIT 8 ( 8G) [VEE external pull-down required] DIGIT 7 ( 7G) [VEE external pull-down required] DIGIT 6 ( 6G) [VEE external pull-down required] DIGIT 5 ( 5G) [VEE external pull-down required] DIGIT 4 ( 4G) [VEE external pull-down required] DIGIT 3 ( 3G) [VEE external pull-down required] DIGIT 2 ( 2G) [VEE external pull-down required] DIGIT 1 ( 1G) [VEE external pull-down required] SEGMENT 1 (P1) [VEE external pull-down required] SEGMENT 2 (P2) [VEE external pull-down required] SEGMENT 3 (P3) [VEE external pull-down required] SEGMENT 4 (P4) (VEE internal pull-down) SEGMENT 5 (P5) (VEE internal pull-down) SEGMENT 6 (P6) (VEE internal pull-down) SEGMENT 7 (P7) (VEE internal pull-down) SEGMENT 8 (P8) (VEE internal pull-down) SEGMENT 9 (P9) (VEE internal pull-down) SEGMENT 10 (P10) (VEE internal pull-down) SEGMENT 11 (P11) (VEE internal pull-down) +5V power supply SEGMENT 12 (P12) (VEE internal pull-down) GND SEGMENT 13 (P13) (VEE internal pull-down) SEGMENT 14 (P14) (VEE internal pull-down) SEGMENT 15 (P15) (VEE internal pull-down) SEGMENT 16 (P16) (VEE internal pull-down) SEGMENT 17 (P17) (VEE internal pull-down) SEGMENT 18 (P18) (VEE internal pull-down) SEGMENT 19 (P19) (VEE internal pull-down) SEGMENT 20 (P20) (VEE internal pull-down) SEGMENT 21 (P21) (VEE internal pull-down) SEGMENT 22 (P22) (VEE internal pull-down) SEGMENT 23 (P23) (VEE internal pull-down) SEGMENT 24 (P24) (VEE internal pull-down)

2. When the system connector is not connected or the power of the subwoofer (NX-SW70) is not turned ON, only VIRTUAL SURROUND and MONO MOVIE functions of the sound field program are available.
IC3 : YM3436D DIR ( Digital Format Interface Receiver )
VSSA VDDA PCO CTLP CTLN TC LR LOCKN P256 X0
DAUX HDLT DOUT VFL OPT SYNC MCC WC MCB
23 XI 12 XO 13 PLOCKN 15 VSS 16 TC 17 DIMDIMDOMDOMKM1 22
FS1 KM0 KM2 TSTN VSSa CTLP (N.C.) PCO CTLN VDDa RSIN

SERIAL INTERFACE

X1 KM2
SYSTEM CLOCK TIMING GENERATOR

MCA MCB WC MCC SYNC OPT

MCA 10 SKSY 11
D DIN ERR CSM EMP FS1 FS0
EIAJ (AES/EBU) DIGITAL AUDIO INTERFACE DECODER

DATA CLOCK CONTROLLER

VFL D OUT DOM1 DOM0

BUFFER P/S

DAUX DIM1 DIM0

Pin No. 25

Pin Name DAUX HDLT DOUT VFL OPT SYNC MCC WC MCB MCA SKSY XI XO P256 LOCK Vss TC DIM1 DIM0 DOM1 DOM0 KM1 RSTN Vdda CTLN
I/O I O O O O O O O O O I I O O O O I I I I I I I
Function Auxiliary input for audio data Asynchronous buffer operation flag Audio data output Parity flag output Fs x 1 Synchronous output signal for DAC Fs x 1 Synchronous output signal for DSP Fs x 64Bit clock output Fs x 1Word clock output Fs x 128Bit clock output Fs x 256Bit clock output Clock synchronization control input Crystal oscillator connection or external clock input Crystal oscillator connection VCO oscillating clock connection PLL lock flag Logic section power (GND) PLL time constant switching output Data input mode selection Data input mode selection Data output mode selection Data output mode selection Clock mode switching input 1 System reset input VCO section power (+5V) VCO control input N

Pin No. 44

Pin Name PCO (NC) CTLP Vssa TSTN KM2 KM0 FS1 FS0 CSM EXTW DDIN LR Vdd ERR EMP CD0 CCK CLD
I/O O I I I I O O I I I O O O O I I
Function PLL phase comparison output VCO control input P VCO section power (GND) Test terminal. Open for normal use Clock mode switching input 2 Clock mode switching input 0 Channel status sampling frequency display output 1 Channel status sampling frequency display output 0 Channel status output method selection External synchronous auxiliary input word clock EIAJ (AES/EBU) data input PLL word clock output Logic section power (+5V) Data error flag output Channel status emphasis control code output 3-wire type microcomputer interface data output 3-wire type microcomputer interface clock input 3-wire type microcomputer interface load input

VSS VDD TSTN

IC4 : YSS908-F (P.C.B. DSP) AC3Dav
PVSS RAMD7 RAMD6 RAMD5 RAMD4 RAMD3 RAMD2 RAMD1 RAMD0 PVDD RAMA2 SCK SI SO /CS /CSB RAMA3 TEST /IC RAMA4 VSS RAMA5 RAMA6 /SDBCK0 SURENC KARAOKE MUTE CRC AC3DATA VDD
VDD SDWCK0 SDBCK0 SDIA0 SDIA1 RAMA1 RAMA0 RAMWEN RAMOEN VSS VDD IPORT7 IPORT6 IPORT5 IPORT4 IPORT3 IPORT2 IPORT1 IPORT0 VSS

TOP VIEW

PVSS SDWCK1 SDBCK1 SDOB0 SDOB1 SDOB2 RAMA7 RAMA8 RAMA9 VDD VSS OPORT7 OPORT6 OPORT5 OPORT4 OPORT3 OPORT2 OPORT1 OPORT0 PVDD

OPORT0~7

IPORT0~7
PVDD RAM CEN RAMA16 RAMA15 SDIB0 SDIB1 SDIB2 XI XO PVSS AVDD TEST TEST TEST OVFB TEST TEST TEST CPO AVSS VDD SDOA2 SDOA1 SDOA0 RAMA14 RAMA13 RAMA12 RAMA11 RAMA10 VSS
69 SCK 66 /CS 67 SO 68 SI 32
MICROPROCESSOR INTERFACE CONTROL SIGNALS

/SDBCKSDBCKSDWCK0 82

CONTROL SIGNALS CONTROL REGISTERS

COEFFICIENT PROGRAM RAM

48 SDBCKSDWCK1

65 /CSB

SDI : SERIAL DATA INPUT SDO : SERIAL DATA OUTPUT

SDIA INTERFACE

SDIBCKSEL

SDOA INTERFACE

SDIB INTERFACE

SDOBCKSEL

SDOB INTERFACE

47 SDOB0

SDIA0 84

SDIASEL

Ls,Rs C,LFE

INPUT BUFFER

SDIA1 85
MAIN DSP AC-3/PROLOGIC DECODER

SDIBSEL

SUB DSP

46 SDOB1

45 SDOB2
SURENC KARAOKE MUTE CRC AC3DATA

STREAM0~7

OPERATING CLOCK (25MHz) PLL DELAY RAM
EXTERNAL RAM INTERFACE ERAMUSE

DATA RAM

15 OVFB

RAMWEN 88

SDOASDOASDOA2 22

RAMOEN 89

CPO 19

SDIBO 5 SDIBSDIB2 7

RAMCEN 2

RAMD0~7

87,86,70,64,61, 59,58,44~42, 29~25,4,3

RAMA0~16

IC4 : YSS908-F AC3Dav
No. Name PVDD RAMCEN RAMA16 RAMA15 SDIB0 SDIB1 SDIB2 XI XO PVSS AVDD TEST TEST TEST OVFB TEST TEST TEST CPO AVSS VDD2 SDOA2 SDOA1 SDOA0 RAMA14 RAMA13 RAMA12 RAMA11 RAMA10 VSS PVDD OPORT0 OPORT1 OPORT2 OPORT3 OPORT4 OPORT5 OPORT6 OPORT7 VSS VDD RAMA9 RAMA8 RAMA7 SDOB2 SDOB1 SDOB0 SDBCK1 SDWCK1 VSS VDD AC3DATA I/O O O O I I I I O Function +5V power supply External SRAM chip enable terminal External SRAM address terminal 16 External SRAM address terminal 15 PCM input terminal 0 to Sub DSP PCM input terminal 1 to Sub DSP PCM input terminal 2 to Sub DSP Crystal oscillator connecting terminal (12.288MHz ) Crystal oscillator connecting terminal Ground terminal (for digital) +3V power terminal (for analog) Test terminal (unconnected) Test terminal (unconnected) Test terminal (unconnected) Sub DSP overflow detect terminal Test terminal (unconnected) Test terminal (unconnected) Test terminal (unconnected) PLL output terminal (connected to external analog filter circuit) Ground terminal (for PLL circuit) +3.3V power terminal (for internal circuit) PCM output terminal from Main DSP (C/LFE output at AC-3/DTS, C/S output at Pro Logic) PCM output terminal from Main DSP (LS/RS output at AC-3/DTS, Lt/Rt output at Pro Logic) PCM output terminal from Main DSP (L/R output at both AC-3/DTS and Pro Logic) External SRAM address terminal 14 External SRAM address terminal 13 External SRAM address terminal 12 External SRAM address terminal 11 External SRAM address terminal 10 Ground terminal (for internal circuit) +5V power terminal General purpose output terminal (L/R ch is shifted by +3dB at Dolby Pro Logic) General purpose output terminal (N.C.) General purpose output terminal (N.C.) General purpose output terminal (N.C.) General purpose output terminal (N.C.) General purpose output terminal (N.C.) General purpose output terminal (N.C.) General purpose output terminal (N.C.) Ground terminal (for internal circuit) +3V power terminal External SRAM address terminal 9 External SRAM address terminal 8 External SRAM address terminal 7 PCM output terminal from Sub DSP PCM output terminal from Sub DSP PCM output terminal from Sub DSP Bit clock input terminal for SDOA, SDIB, SDOB signals Word clock input terminal for SDOA, SDIB, SDOB signals Ground terminal +3V power terminal AC-3 data output terminal, AC-3 bit stream data detect

O O O O O O O O

O O O O O O I I
No. Name CRC MUTE KARAOKE SURENC /SDBCK0 RAMA6 RAMA5 VSS RAMA4 /IC TEST RAMA3 /CSB /CS SO SI SCK RAMA2 PVDD RAMD0 RAMD1 RAMD2 RAMD3 RAMD4 RAMD5 RAMD6 RAMD7 PVSS VDD2 SDWCK0 SDBCK0 SDIA0 SDIA1 RAMA1 RAMA0 RAMWEN RAMOEN VSS VDD IPORT7 IPORT6 IPORT5 IPORT4 IPORT3 IPORT2 IPORT1 IPORT0 VSS I/O O O O O O O O O I O I I O I I O I/O I/O I/O I/O I/O I/O I/O I/O Function AC-3 CRC error detect terminal Auto mute detect terminal AC-3 KARAOKE data detect terminal AC-3 2/0 mode Dolby surround encode input detect terminal SDBCK0 invert clock output terminal External SRAM address terminal 6 External SRAM address terminal 5 Ground terminal External SRAM address terminal 4 Initial clear terminal Test terminal (unconnected) External SRAM address terminal 3 Sub DSP chip select input terminal Microprocessor interface chip select input terminal Microprocessor interface data output terminal Microprocessor interface and Sub DSP data input terminal Microprocessor interface and Sub DSP clock input terminal External SRAM address terminal 2 +5V power terminal External SRAM data terminal (STREAM 0 output when external SRAM is not used) External SRAM data terminal (STREAM 1 output when external SRAM is not used) External SRAM data terminal (STREAM 2 output when external SRAM is not used) External SRAM data terminal (STREAM 3 output when external SRAM is not used) External SRAM data terminal (STREAM 4 output when external SRAM is not used) External SRAM data terminal (STREAM 5 output when external SRAM is not used) External SRAM data terminal (STREAM 6 output when external SRAM is not used) External SRAM data terminal (STREAM 7 output when external SRAM is not used) Ground terminal +3V power terminal Word clock input terminal for SDIA, SDOA, SDIB and SDOB signals Bit clock input terminal for SDIA, SDOA, SDIB and SDOB signals AC-3/DTS bit stream (or PCM) data input terminal to Main DSP AC-3/DTS bit stream (or PCM) data input terminal to Main DSP External SRAM address terminal 1 External SRAM address terminal 0 External SRAM write enable terminal External SRAM output enable terminal Ground terminal +3V power terminal General purpose input terminal (GND) General purpose input terminal (GND) General purpose input terminal (GND) General purpose input terminal (GND) General purpose input terminal (GND) General purpose input terminal (GND) General purpose input terminal (GND) General purpose input terminal (GND) Ground terminal

I I I I O O O O

I I I I I I I I
s AV-S70 BLOCK DIAGRAM (1/2)
SIGNAL SENSOR MSENSOR SELECTOR IC IC103 LC78212 L CNIC107 L : 10 mV M : 5 mV H : 3mV
SELECTOR IC IC101 TC4052BF

INPUT 1 (AUX) R

(2) 7 (1)

1 (30) 2 (29)

4 (27)
6 M5220FP L : IC104 R : IC105
ML MR LFE RL RR GO TO CN601 *WOOFER P. C.B. *POWER AMP

INPUT 2 (TV) R

R 13 B A

IC10 M5220FP

TM102 XX707320 VP206500 * AAX10900 * AAX10800 * AAX12080
PIN HOLDER.FUS HEAT.SINK SCR.PAN.HD SCR.BND.HD
IPS-5007 EYF-52BCT DPS35-40 3x12 ZC 3x6 ZC

075633

2-14 2-25 2-5 2-2-2 2-25 1-7 1-13 1-11 2-1 1-8 2-25 1-8 2-2-3 2-2-5 2-2-6 2-2-7 1-11 2-23 2-23 2-2-6 3(B) 2-2-1 2-2-4 2-2-6 1-13 1-8 200-1 2-27 2-18 2-2-5 2-2-6 2-2-7 1-11 2-23 1-11 2-29 1-11 2-23 2-25 1-11 2-23 1-5 2-15

s AV-S70 EXPLODED VIEW

1-11 1-8 1-10 1-9 2-16 2-26 1-9 1-11 1-4 2-19 2-12 3(E) 2-3 2-19 2-19 2-22 2-7 2-6 2-13 2-19 2-19 2-21 2-28 2-19 1-10 3(D) 1-6 1-11 1-5

1-6 2-24 2-24 4(A) 3(C)

1-7 2-26 2-24 2-9 2-24
3(A) 2-19 4(B) 2-8 2-19 2-4 1-2 1-12 2-30 2-11 2-17

2-10 1-1

s AV-S70 MECHANICAL PARTS
Ref. No. * * * * * * * * * * * * * * * * * * * * 1- 1 1- 1 1- 2 1- 3 1- 4 1- 5 1- 5 1- 6 1- 7 1- 8 1- 9 1-10 1-11 1-12 1-13 2- 1 2-2-1 2-2-2 2-2-3 2-2-4 2-2-5 2-2-6 2-2-7 2- 3 2- 4 2- 5 2- 6 2- 7 2- 8 2- 9 2-10 2-11 2-12 2-13 2-14 2-14 2-15 2-16 2-17 2-18 2-19 2-21 2-22 2-23 2-24 2-25 2-26 2-27 2-28 2-29 2-4
PART NO. AAX10600 AAX10610 AAX11040 AAX11330 XY128A00 AAX11080 AAX11090 AAX11340 AAX11370 AAX10980 AAX10790 AAX10860 AAX10870 AAX10830 AAX11360 AAX14930 AAX10810 AAX10110 AAX10880 AAX11050 AAX11070 EP600250 XV466A00 AAX11060 AAX11290 AAX10920 AAX14920 AAX10050 AAX10780 AAX10650 AAX10630 AAX10620 AAX10120 AAX10130 VZ163900 VZ164000 CB072750 AAX11310 CB069250 AAX11030 AAX10830 XY773A00 AAX10820 AAX09630 EP600250 AAX10840 AAX10850 AAX10990 AAX11010 AAX11020 AAX12940 AAX15150 AAX15140
Description SIDE PANEL SIDE PANEL GRILLE ASSY ENCLOSURE SPEAKER PLATE,LEG PLATE,LEG FOOT PAD WASHER, FILM PAN HEAD B-TITE SCREW BIND HEAD TAPPING SCREW BIND HEAD TAPPING SCREW BIND HEAD B-TITE SCREW WING BOLTS REAR PANEL PAN HEAD B-TITE SCREW INSULATOR HEATSINK CUSHION BUSH BRACKET, P.C.B. BIND HEAD B-TITE SCREW IC BRACKET,POWER SW MOLD FRONT MOLD HEATSINK COVER BUTTON POWER SW DECO FL FILTER DECO DISPLAY SPACER CHASSIS SHIELD COVER INSULATOR, POWER SW CUSHION POWER CORD POWER CORD CORD STOPPER RIVET BINDING TIE FLAT CABLE BIND HEAD B-TITE SCREW TRANSFORMER POWER FLAT HEAD SCREW BIND HEAD B-TITE SCREW BIND HEAD B-TITE SCREW BIND HEAD B-TITE SCREW BIND HEAD C-TITE SCREW CONNECTOR, FLAT CABLE CONNECTOR, FLAT CABLE CONNECTOR, FLAT CABLE RIVET P.C.B. ASSY P.C.B. ASSY R L

Remarks 331415

Markets

8cm R L

JA0868
4x12 3x16 4x12 3x10 M4x0.7 3x12 ZC MICA TO-220 B-24 C A3B1A0 3x8 ZMC2-Y LM1875T

* * * * * * * * * * * Z*

KGLS-22S
* * * Z* * * * * * * * * * *
8x25x6 B G SR-4N-4 M3 BK-1 17P 125mm DSP 3x10 M3x6 ZC 3x8@ BL B 3x8 ZMC2-Y 3x10 BL 4x6 ZC 13P 92mm AF 23P 280mm MAIN 9P 330mm WRITER NRP-345 AMP DSP-FL

Ref. No. * 200 * 200-1 * *
PART NO. V5633900 AAX15160 AAX11350 AAX10940 ACCESSORIES REMOTE CONTROL LID FASTENER TAPE PIN CORD BATTERY

Remarks 055593 055701

2pcs 2p 3mx1 SUM4,AAA,R03

s SW-AVS70 EXPLODED VIEW

1-7 2-1 2-2 2-6 1-7 2-10 2-15 2-15 2-10 1-7

2-17 1-7

2-16 3(B)

2-10 2-3

2-7-3 2-7-2

2-12 2-7-7

2-7-4 2-11

1-7 1-3

1-7 2-7-5 2-7-6 2-9 2-9 3(A) 2-4 2-8 2-18 2-17

3(C) 2-5 1-1 1-2 1-6

1-4 1-1-4 1-8 207

203 205

s SW-AVS70 MECHANICAL PARTS
Ref. No. * * * * * * * * * * Z* * * * * * * * * * * * * * Z*
PART NO. AAX12510 AAX12310 AAX12040 AAX12290 XX701830 AAX12130 AAX12120 AAX12930 AAX09340 AAX09720 AAX14940 XY774A00 AAX12340 AAX14950 AAX12320 AAX12010 AAX12020 AAX12030 AAX11970 AAX12380 AAX12090 AAX12160 AAX12080 AAX12090 AAX12100 VZ163900 VZ164000 AAX12230 CB069250 AAX12110 AAX09370 AAX12910 AAX12920 AAX12780 AAX12520
Description SPEAKER GRILLE ASSY ENCLOSURE FOOT NUT BIND HEAD TAPPING SCREW BIND HEAD TAPPING SCREW SEAL CUSHION A MOLD CASE BRACKET GUARD TRANSFORMER POWER INSULATION SHEET REAR PANEL HEATSINK BRACKET,P.C.B. BRACKET,P.C.B. INSULATOR IC PAN HEAD B-TITE SCREW BIND HEAD B-TITE SCREW BRACKET BIND HEAD B-TITE SCREW BIND HEAD B-TITE SCREW BIND HEAD B-TITE SCREW POWER CORD POWER CORD CUSHION STOPPER BINDING TIE BIND HEAD B-TITE SCREW CUSHION BUSH SEAL SEAL P.C.B. ASSY SPEAKER SYSTEM ACCESSORIES WALL BRACKET BRACKET CORD DIN CORD PAN HEAD SCREW-SEMS WING BOLTS 16cm
Remarks 049670 (IC109) 057955 055719S

* * * * * * *

1- 1 1- 2 1- 3 1- 4 1- 5 1- 6 1- 7 1- 8 2- 1 2- 2 2- 3 2- 4 2- 5 2- 6 2-7-1 2-7-2 2-7-3 2-7-4 2-7-5 2-7-6 2-7-7 2- 8 2- 9 2-10 2-11 2-12 2-12 2-13 2-14 2-15 2-16 2-17 2-4

M3.5x16 M4x20

MAIN L R MICA STK408-040E 3x20 BL 3x12 BL CLIP L80 A 3x6 ZC 3x12 BL 4x10 BL B G SR-4 BK-1 3x10 BL BO

AMP 1pc

206 207
AAX12600 AAX12140 AAX12220 AAX11960 AAX12390 AAX11360
2pcs 2pcs 15mx2 8P 3mx1 M4x8 M4x0.7

017957 057360

REMOTE CONTROL TRANSMITTER

s SCHEMATIC DIAGRAM

VDD VDD
C1 470F C3 0.1F 15 X1 4.0MHz 14 CIC X2 XNC 1 AAA2 C2 0.1F VDD VDD VSS VSS P21/TXD/S00 P20/SCK5 SCL SDA VDD 8 R6 1k R2 1k

C7 0.1F

OPTION

P47/KR7

R7 470k 18 K65 C6 0.1F RESET
P46/KR6 P45/KR5 P44/KR4 P43/KR3 P42/KR2 P41/KR1 P40/KR0
P47 P46 P45 P44 P43 P42 P41 P16 K42 K34 K26 K18 K10 K43 K35 K27 K19 K11 K44 K36 K28 K20 K12 K45 K37 K29 K21 K30 K22 K46 K39 K31 K23 K16 P41 K50 P42 K51 P43 K52 P44 K53 P45 P46 K55 P47

R3 220k

P14 P13

25 C5 0.01F 37 12

P30/INTP0 NC NC P17 P16 P15 P14 P00 P01 P02 P04 P05 P06 P07 P50/T10/T00 P22/RXD/SP51/T02 P13 P12 P11 P3 NC P16 P15 P14 P13 P12 P11 NC RD2 R16 100k P11 P12
NC NC NC NC NC NC Q1 2N3904 NC

R15 6.8

RQ4 8550D

VDD VBAT

BAT 1.5V x 2
P03 P31/INTP1 P32/INTP2/CPT2 P53 P20 NC JP256

Initial code of YAMAHA

Key No. 55
DSP SET INPUT TruBass VOL

FUNCTION

CUSTOM (HEX) 78 78
DATA (HEX) 9C 51 5E 8B 1F 1E 0F 5F 50 17 9E 4D 18 9D 8A 19 9F 4C
VOL + TEST DSP ON/OFF S70 VCR SAT TV 1 (TEST MODE only) 4 (TEST MODE only) 7 (TEST MODE only) MENU + SUBWOOFER 2 (TEST MODE only) 5 (TEST MODE only) 8 (TEST MODE only) MENU NIGHT MODE 3 (TEST MODE only) 6 (TEST MODE only) 9 (TEST MODE only) MENU SUBWOOFER +
Parts List for Carbon Resistors
Value 1.0 1.8 2.2 3.3 4.7 5.910 1.0 k 1.2 k 1.5 k 1.8 k 2.0 k 2.2 k 2.4 k 2.7 k 3.0 k 3.3 k 3.6 k 3.9 k 4.7 k 5.1 k 5.6 k 6.8 k 8.2 k 9.1 k
1/4W Type Part No. 1/6W Type Part No. HJHFHJHJHFHJHFHJHFHJHFHFHFHJHFHFHFHJHFHFHFHJHFHFHFHFHFHFHFHFHFHFHFHFHFHFHFHJHFHFHFHFHFHJHFHFHFHFHFHFHFHFHFHFHFHFHFHFHFHFHFHFHFHFHFHFHFHFHFHFHFHFHFHFHFHFHFHFHJHFHFHFHJHFHFHFHFHFHFHFHJHFHFHFHFHFHFHFHFHFHFHFHFHFHFHF45 6910
Value 10 k 11 k 12 k 13 k 15 k 18 k 22 k 24 k 27 k 30 k 33 k 36 k 39 k 47 k 51 k 56 k 62 k 68 k 82 k 91 k 100 k 110 k 120 k 150 k 180 k 220 k 270 k 300 k 330 k 390 k 470 k 560 k 680 k 820 k 1.0 M 1.2 M 1.5 M 1.8 M 2.2 M 3.3 M 3.9 M 4.7 M
1/4W Type Part No. 1/6W Type Part No. HFHFHFHFHFHJHFHFHFHFHFHFHFHFHFHFHFHJHFHFHFHFHFHFHFHFHFHFHFHFHFHFHFHFHFHFHFHFHFHFHFHFHFHFHFHFHFHFHFHFHFHJHFHFHFHFHFHFHFHJHFHFHFHJHFHJHFHJHFHFHJHFHJHFHJHFHJHFHJHJHFHJ35 9470

1/4W Type

1/6W Type

10mm 5mm

Waveguide Horn

3cm Aluminium Dome Tweeters with DC-Diaphragm and New Frame (525 A-PMD and 325 A-PMD Series) The high-performance tweeter features a dome made of an aluminium, with a DC-Diaphragm that integrates the diaphragm and voice coil. The magnet is an new extra-powerful neodymium type. As a result, the tweeter is extremely light to minimize sound loss, yet is highly durable. It is capable of reproduction all the way up to 100kHz, which is exceptional performance for a 3cm dome tweeter. Highs are crisp and clear even at high power levels. High-Performance Crossover Networks (525 A-PMD and 325 A-PMD Series) The crossover networks use high-performance Solen capacitors with extremely low loss characteristics, ensuring fast response. Innovative Two Separate Chambers with Vertical and Slanted Partitions (NS-525F) The cabinet has two separate chambers for the three drivers. The interior has vertical and slanted partitions to decrease standing waves. This
Innovative two-separate chambers with vertical and slanted partitions for strong structure restricts vibration (NS-525F) Three-way mitered-joint construction

Dust cap

Diffuser
16cm Advanced PMD cone Voice coil Spider Diecast aluminium basket
Top plate Main magnet Bottom yoke Shielding magnet Shielding yoke
Traditional joint construction
Waveguide Horn (HX Series and EF Series) Modern movie theatres are designed to offer a highly absorptive acoustic environment in which soundtrack recordings with five or more channels can be used to achieve a rich sense of spatial expression. To achieve a similar level of spatial 8
Slanted partition board Vertical frame + ladder structure
Network Multimedia Technology

Internet

Don't limit your choices!
With a Network Receiver you can connect a wide range of multimedia entertainment sources.

Internet Radio

iPod USB

RX-V2700

Digital Home Theatre Receiver (See page 13.)

Router

RX-N600
Digital Home Theatre Receiver (See page 17.)

Enjoy Internet Radio.

A major benefit of Internet Radio is that it lets you hear all types of music from around the world. By connecting a Network Receiver to the Internet, you can browse a list of more than 2,000 Internet Radio stations, plus a list of podcasts. Just select a station with the remote unit and start enjoying the wide variety of Internet Radio choices.

The YSP-900 and YSP-800 are a perfect match for 32 flat TVs and monitors.

YST-FSW100

Optional Subwoofer

see page 27

www.soundprojektor.de
For information on Digital Sound Projector technology, see page 4. For specifications, see page 41.
Digital Home Theatre Receivers
Yamaha takes home theatre receivers to new levels of quality, versatility and convenience.
The RX-V2700 is the perfect component to build a high performance home theatre system around. Both audio and video quality are exceptionally high, thanks to features like 1080p-compatible HDMI, high-definition video upscaling and Pure Direct for the best possible sound. A new circuit isolation layout provides greater rigidity for vibration damping, and the RX-V2700 has a new special feature: Network Receiver functions. The RX-V1700 has nearly the same features and performance. Two great choices for the best in home entertainment.
Brilliant Audio: Titanium
7.1-Channel Digital Home Theatre Receiver
7-channel 200W/ch (max) powerful surround sound 1080p-compatible HDMI (3 in/1 out) Full analogue video upconversion to HDMI with TBC (Time Base Corrector) Deinterlacing and upscaling (480i/576i to 1080i/720p) Network Receiver functions (Internet Radio, PC music files, USB portable audio players and flash drives) Quad-Field CINEMA DSP with 22 DSP programmes Digital ToP-ART with the finest parts used throughout Pure Direct for higher fidelity sound reproduction iPod compatibility via optional Yamaha YDS-10 USB flash drive/music player (MP3/WMA/WAV) compatibility Improved YPAO sound optimization GUI on-screen display (6 languages: English, French, German, Spanish, Optional YDS-10 Russian and Japanese) Assignable Universal Dock for iPod amplifiers for bi-amp connection Dimension (W x H x D): Superior multi-zone control 79 x 33.5 x 70 mm compatibility iPod not included.
Banana-plug compatible speaker terminals are not available in some areas.
Oil-Damped Hidden Control Panel
Direct-access (macro-command, learning and preset capable) remote unit with illuminated buttons (right) and dedicated zone remote unit (left)

RX-V1700

7-channel 180W/ch (max) powerful surround sound 1080p-compatible HDMI (2 in/1 out) Full analogue video upconversion to HDMI with TBC (Time Base Corrector) Deinterlacing (480i/576i to 480p/576p) Quad-Field CINEMA DSP with 22 DSP programmes Digital ToP-ART with the finest parts used throughout Pure Direct for higher fidelity sound reproduction iPod compatibility via optional Yamaha YDS-10 Improved YPAO sound optimization On-screen display Assignable amplifiers for biamp connection Superior multiOptional YDS-10 Universal Dock for iPod zone control compatibility
iPod not included. Direct-access (macro-command, learning and preset capable) remote unit with luminescent buttons
For information on Digital Home Theatre technology, see page 57. For surround programmes, see page 39. For specifications, see page 40.

RX-V861

7-channel 155W/ch (max) powerful surround sound 1080p-compatible HDMI (2 in/1 out) Full analogue video upconversion to HDMI with TBC Deinterlacing and upscaling through HDMI output (480i/576i to 1080i/720p) 4 SCENE buttons make operation much easier Quad-Field CINEMA DSP with 17 DSP programmes Digital ToP-ART with the finest parts used throughout Pure Direct for higher fidelity sound reproduction iPod compatibility via optional Yamaha YDS-10 Improved YPAO sound optimization On-screen display Assignable amplifiers for biamp connection Superior multi-zone control compatibility
Banana-plug compatible speaker terminals are not available in some areas. Optional YDS-10 Universal Dock for iPod Dimension (W x H x D): 79 x 33.5 x 70 mm iPod not included. Black finish available. Direct-access (macro-command, learning and preset capable) remote unit with luminescent buttons

RX-V661

7-channel 140W/ch (max) powerful surround sound 1080p-compatible HDMI (2 in/1 out) 4 SCENE buttons make operation much easier Quad-Field CINEMA DSP with 17 DSP programmes Digital ToP-ART with the finest parts used throughout Pure Direct for higher fidelity sound reproduction iPod compatibility via optional Yamaha YDS-10 Improved YPAO sound optimization On-screen display Compressed Music Enhancer Assignable amplifiers for bi-amp connection Superior multizone control compatibility
Banana-plug compatible speaker terminals are not available in some areas. Optional YDS-10 Universal Dock for iPod iPod not included. Black finish available. Direct-access (macro-command, learning and preset capable) remote unit with luminescent buttons

RX-V461

5.1-Channel Digital Home Theatre Receiver
5-channel 105W/ch (max) powerful surround sound 1080pcompatible HDMI (2 in/1 out) 4 SCENE buttons make operation much easier 8 DSP programmes Direct Stereo for high quality 2-channel sound reproduction USB flash drive/music player (MP3/WMA/WAV) compatibility YPAO sound optimization On-screen display Compressed Music Enhancer 3 HDTV-compatible component video inputs

Black finish available. Preset remote unit

RX-V361

5-channel 105W/ch (max) powerful surround sound 4 SCENE buttons make operation much easier 8 DSP programmes Compressed Music Enhancer Night Listening Enhancer (Cinema/Music) and SILENT CINEMA Front panel mini jack input for portable player connection Audio delay for adjusting lip-sync 192kHz/24-bit DACs for all channels 3 HDTV-compatible component video inputs
Banana-plug compatible speaker terminals are not available in some areas. System remote unit
SCENE For Instant Access Operation

DVD Movie

Viewing
Source: DVD Surround: MOVIE

Music Disc

Listening
Source: DVD Surround: STEREO/ 2ch STEREO
Source: DTV/CBL Surround: STRAIGHT
Source: FM/AM (TUNER) Surround: MUSIC ENHANCER/ 7(5)ch STEREO
< With ordinary receivers >

5 Steps. Complicated!

5 1. 2. 3. 4. Turn on DVD Player Turn on AV Receiver Set Input Selector Set Surround Mode 5. Play DVD

< With SCENE >

Just 1 Step !

Much Easier!

1. Press SCENE Button
* Controllable DVD Player: Yamaha DVD-S661, DVD-S1700, etc. (via "Remote In" port)
Only the RX-V861 and RX-V661 SCENE buttons can power on source units, and they can only power on Yamaha DVD and CD players. The RX-V461 and RX-V361 SCENE buttons can not turn the receiver power on.
A new level of operating ease (RX-V861, RX-V661, RX-V461 and RX-V361) With Yamahas new AV receivers SCENE feature, at the touch of a button you can be watching a DVD within seconds! Conventional start up of an AV receiver requires you to turn on components such as a DVD player, select the source (i.e.: DVD player) you need to ensure it is on the right DSP programme and then you can press play. However, with Yamahas SCENE feature all you need to do is press one button which will automatically turn on the DVD player, it will ensure that it is on the right DSP setting and it will even start the movie for you! So how does it work? The new series of AV receivers from Yamaha all come with four SCENE buttons and each one is preprogrammed to perform a different function. The default settings of these SCENE buttons are DVD Movie Viewing, Music Disc Listening, TV Viewing and Radio Listening. If however, you have different preferences

NS-8900

NS-P8900
For information on Digital Home Theatre Speaker technology, see page 8. For specifications, see page 4143.

7900 Series

Rich, clear sound speaker systems. A very convenient way to begin enjoying the thrilling experience.

NS-7900

NS-6900

NS-P7900 NS-P7900

(Centre) (Surround)

NS-P7900

Package Speakers
Digital Home Theatre Speaker Packages
Here is a quick way to great home theatre enjoyment buy all your speakers in one package. You get speakers that are perfectly matched for design and acoustics, at a very reasonable price!

NS-P446

Digital Home Theatre 6.1-Channel Speaker Package

NS-P440

Digital Home Theatre 5.1-Channel Speaker Package

NS-P270

NS-P110

SPS-30MM

Optional Speaker Stands for NS-P446 and NS-Px 320 mm (base), 618868 mm (height) 2.4 kg

SPS-80

Optional Speaker Stands for NS-P110 and NS-Pmm (base), 650900 mm (height) 1.9 kg

Subwoofers

A Must for Digital Home Theatre and HiFi
Full audio enjoyment of digital music and movie sources requires deep, clear bass response. Yamaha subwoofers use sophisticated technologies such as QD-Bass technology (down-firing drivers that radiate the sound in four directions) and Advanced YST to ensure the highest levels of sound pressure and overall performance.

YST-SW1500

Advanced YST and QD-Bass Subwoofer

Piano Finish

YST-SW030

YST-SW015

YST-RSW300
Advanced YST II and Front Firing Subwoofer

YST-SW012

Advanced YST II and FD-Bass Subwoofer The YST-FSW100 has a slim, elegant design that will perfectly match thin-line home theatre components and flat TVs or monitors.

Desktop Audio

One-Box Cubic Stereo Speaker
Cute and compact cube-shaped powered speaker delivers good audio quality with surprisingly big bass to pump up your portable audio sound.
High Sound Quality the Yamaha Way Yamahas new SR-Bass technology maximizes internal energy to produce bass that is deeper and more powerful than you would think possible from a compact speaker. The NX-A01 also benefits from Yamahas long tradition of excellence in speaker design. The speaker unit is a 3cm titanium cone capable of skillfully reproducing the entire frequency range. Greater Music Enjoyment from iPod and Other Portable Devices MP3 players are everywhere these days, not only

Max. Instantaneous Power:
Peak Required Power Unused Power = Stored Power Maximum Power Supplied by USB (2.5W)

Music Level

PowerStorage Circuit

Conventional USB Speaker

Natural Sound HiFi Components:
Putting you in the same room as the musicians.
Yamaha has always offered a wide range of high quality components to fit any budget, and now our lineup is more impressive than ever. One prime example: the Soavo series speakers, designed to deliver extraordinarily beautiful music quality. Our PianoCraft has been upgraded and all the new HiFi components are more convenient and versatile than ever.

Soavo Technology

Soavo-1 midrange driver

ke Yo ium ym od Ne

r e n le m et ap ne nd lat ide ibbo oil po gn co rrou st c niu et Sp pp D ma mi ask tre dr ec Du To Su en PM alu b un voic C o t ed as -w re nc ec ge wi va Di Ed Ad

D R I V E R S

Advanced PMD Woofer and Midrange Cones In order to provide very fast attack time (sound rise and fall), as well as excellent midrange clarity and bass response, Yamaha developed Advanced PMD (Advanced Polymer-injected Mica Diaphragm) cones that are extremely light, rigid and sturdy. They employ a low specific gravity material called PMP (Poly-Methyl-Pentene) that is much lighter than either paper or polypropylene. Precisely determined amounts of mica and talc are added, which testing has proved contribute to the beautiful quality of sounds in the vocal range. These drivers internal loss characteristics decrease unwanted resonances to achieve the smooth frequency response that results in natural sounding vocals. The midrange driver creates a feeling of presence as if someone is actually singing in the room, while the dual woofer design delivers deep and tight bass. Aluminium Dome, DC-Diaphragm Tweeter The high-performance 3cm aluminium dome tweeter delivers crisp and clear highs at all power levels. It employs a fully integrated diaphragm/voice coil structure called the DC-Diaphragm that eliminates extraneous materials for a cleaner sound. It is extremely light yet durable, and for a small unit transmits an extremely large amount of detailed sound information, resulting in a denser sound DC-Diaphragm field. Tweeter Plate A diecast aluminium tweeter plate isolates the tweeter from cabinet vibration and provides a solid attachment for the tweeter unit, so the high range sound is clear and transparent, with no colouration. All Parts Selected for the Highest Possible Performance The edgewise-wound ribbon wire voice coil contributes to high resolution, exceptional sound detail and excellent imaging. The spider is a high performance model made by Kurt Mller of Germany. Diecast aluminium baskets ensure solid support for high stiffness, improving sound image Spider by Kurt Mller localization and depth (High linearity suspension) reproduction. The midrange driver is powered by a newly designed, compact and powerful neodymium magnet. Carved Wooden Port Each port is carved from carefully chosen, high quality wood. The port has very thick and rigid walls and a flared shape, ensuring a smooth sound flow that contributes to Wooden port bass sound with a more spacious and massive feel.

PianoCraft E810 Micro Component System

PianoCraft E810

Universal Dock for iPod
PianoCraft E410 YDS-10 (for E810 and E410) The optional Yamaha YDS-10 Universal Dock lets you connect an iPod to the E810/E410 to hear all your iPod music through the system. You can also operate the iPod via the E810/E410s remote unit with the aid of the receivers display. Whats more, the Universal Dock will even charge up your iPod while its connected. Works with: iPod nano, iPod mini and iPod (Click Wheel)

PianoCraft

PianoCraft E410 Micro Component System
[Receiver: RX-E410] High output power: 60W/ch with discrete amplification Pure Direct for high quality sound reproduction iPod compatibility via optional Yamaha YDS-10 High dynamic power and Linear Damping RDS and 40-station preset tuning Subwoofer out [CD Player: CDX-E410] Audio CD, MP3 CD and WMA CD playback 3-mode CD Text display [Speaker Systems: NX-E800] New speaker cabinet with innovative crossbracing 2-way bass-reflex speaker system
PianoCraft E700 Micro Component System
[CD/DVD Receiver: RDX-E700] MP3, JPEG, DivX and WMA multisession compatibility Progressive Scan processing (PAL/NTSC) Versatile format and disc compatibility Convenient multi-jog dial Slim loading tray High output power: 30W/ch Multiple repeat play Programme play 30 FM/20 AM-station instant one-touch preset tuning Subwoofer out [Speaker Systems: NX-E700] 2-way bass-reflex speaker system 11cm woofer and 2.5cm dome tweeter 110W high power input capability

PianoCraft E320

Micro Component System Available from August 2007

CD-Receiver: RDX-E320

Audio CD, MP3 CD and WMA CD playback USB-port 3,5 mm mini jack 30 W/channel 30 FM-station Subwoofer out

HiFi Components

Versatile, convenient, high capacity digital recording. ideal for a variety of uses including as a high quality jukebox.
CDR-HD1500 HDD + CD-R/RW Digital Audio Recorder
More Easily: Ripping, Editing, Playback and Burning New CDs If listening to music is important to you, the CDR-HD1500 is going to make your life a lot more enjoyable. You can rip over 400 CDs onto the hard disk, then group the songs together for playback and recording. Creating your own personal CD collection is easy and fun. Youll also appreciate the CDR-HD1500s superb audio quality, high speed operation, versatile functions and fast music access. In fact, the more you use it, the more youll realize that this is a machine designed by music enthusiasts, for music enthusiasts. Make the most of it! Extremely High Quality Recording and Playback The CDR-HD1500 uses a Linear PCM recording system, which means the music signal is recorded without being compressed, so no quality is lost. In addition, recording from CD to hard disk and back to CD maintains full digital quality throughout the process. A high performance 24-bit D/A converter ensures optimum audio reproduction, and a 24-bit A/D converter is used for best quality analogue source recording. And finally, unlike PCs with a hard disk and CD recorder, the CDR-HD1500 is designed exclusively for audio use all memory and technology is dedicated to maximizing audio quality. Audio Master Quality Recording This is an exclusive new Yamaha recording process that provides even higher quality when creating CD-R discs. It creates bigger pits and lands (the space between pits), enabling higher recording accuracy. In fact, it raises recording quality to the level of professionally prepared music CDs. This greater capacity demanded by this type of recording requires a hard disk drive, so it is only possible with the CDR-HD1500. Flexible Editing Functions The hard disk drive makes it possible to edit the stored music before creating a new CD, unlike ordinary CD recorders which dont let you edit once the music is recorded. The CDR-HD1500 takes full advantage of this ability, offering a large choice of editing features. Individual tracks can be combined, split, faded in/out, moved, erased and more, all with no loss of quality. You can even edit during playback just press the Menu key and the CDR-HD1500 enters the editing mode. In addition, you can create and edit your own disc, album and track titles via the Jog dial or a PC.

AX-397

95W x 2 Switchable CD/DVD Direct Amplification Super Audio CD and DVD-Audio ready with extended frequency response Linear Damping High dynamic power, low-impedance drive capability Continuously variable loudness control and bass/treble/balance controls (with centre clicks) Remote controllable motor-driven volume control Speaker A, B or A+B selection

TX-497

AM/FM Stereo Tuner
40-Station AM/FM random access preset tuning Auto FM station memory and preset editing (Auto station memory) Direct PLL IF count synthesizer tuning Absolute Linear Phase IF Amplifier circuitry Multi-status station memory RDS: Radio Data System

CDX-497

CD Player
CD-R/RW, MP3 and WMA playback Numerous convenient functions: 40-track programmable play, random play, and A-B, single track and entire disc repeat Intelligent Digital Servo Optical and coaxial digital outputs Low-impedance power supply for stable signal path Front panel headphone jack Low-impedance power supply Aluminium front panel

CDX-397

CD-R/RW playback Numerous convenient functions: 40-track programmable play, random play, and A-B, single track and entire disc repeat Intelligent Digital Servo Peak search CD Text display CD-tape synchro rec start Low-impedance power supply for stable signal path Display dimmer Aluminium front panel

CDC-697

CD Changer
Yamaha patented PlayXchange CD-R/RW playback 40-track programmable play and clear RS-232C interface SCENE-Keys Supersilent CD changer mechanism with disc stabilizer Laser pickup floating mechanism Intelligent Digital Servo Peak search CD-tape synchro rec start Disc (intro) scan 3-mode CD Text display Optical digital output and variable analogue output
For specifications, see page 43.
HiFi Component Recommended Combinations
Sounds great, looks impressive a perfectly matched system of high performance components and fine quality speaker system.

HiFi Pack 306

HiFi Pack 306 includes AM/FM Stereo Receiver RX-797 (Black), CD Player CDX-497 (Black) and Natural Sound Speaker System NS-325F (Black) Titanium finish available: HiFi Pack 306T (RX-797 Titanium + CDX-497 Titanium + NS-325F Cherry)
High sound quality is yours to enjoy from latest generation components and beautiful PianoCraft speakers.

HiFi Pack 206

HiFi Pack 206 includes AM/FM Stereo Receiver RX-497 (Black), CD Player CDX-497 (Black) and Natural Sound Speaker System NX-E800 (Black) Titanium finish available: HiFi Pack 206T (RX-497 Titanium + CDX-497 Titanium + NX-E800 Black)
Receiver and CD Player combined with handsome piano-finish speakers provides outstanding value.

HiFi Pack 106

HiFi Pack 106 includes AM/FM Stereo Receiver RX-397 (Black), CD Player CDX-397 (Black) and Natural Sound Speaker System NS-333 (Black) Titanium finish available: HiFi Pack 106T (RX-397 Titanium + CDX-397 Titanium + NS-333 Black)

Amplifier and CD Player featuring Yamahas advanced digital technology for clear, dynamic sound with all the delicate nuances.

HiFi Set 397

HiFi Set 397 includes Stereo Integrated Amplifier AX-397 (Black) and CD Player CDX-397 (Black) Titanium finish available: HiFi Set 397T (AX-397 Titanium + CDX-397 Titanium)
HiFi Components / Surround Programmes

Surround Programmes

RX-V2700 / RX-VDSP Programmes Compatible Decoding Formats Dolby Digital Dolby Digital EX DTS Digital Surround DTS-ES Matrix 6.1 DTS-ES Discrete 6.1 DTS 96/24 Dolby Pro Logic Dolby Pro Logic II Music Dolby Pro Logic II Movie Dolby Pro Logic II Game Dolby Pro Logic IIx Music Dolby Pro Logic IIx Movie Dolby Pro Logic IIx Game DTS Neo:6 Music DTS Neo:6 Cinema HiFi DSP Programmes Hall in Munich Hall in Vienna Hall in Amsterdam Church in Freiburg Chamber Village Vanguard Warehouse Loft Cellar Club The Roxy Theatre The Bottom Line 7 Channel Stereo 11
RX-V861 / RX-VDSP Programmes Compatible Decoding Formats Dolby Digital Dolby Digital EX DTS Digital Surround DTS-ES Matrix 6.1 DTS-ES Discrete 6.1 DTS 96/24 Dolby Pro-Logic Dolby Pro Logic II Music Dolby Pro Logic II Movie Dolby Pro Logic II Game Dolby Pro Logic IIx Music Dolby Pro Logic IIx Movie Dolby Pro Logic IIx Game DTS Neo:6 Music DTS Neo:6 Cinema HiFi DSP Programmes CLASSICAL Hall in Munich Hall in Vienna Chamber Cellar Club The Roxy Theatre The Bottom Line 7 Channel Stereo 7
RX-NDSP Programmes Compatible Decoding Formats Dolby Digital Dolby Digital EX DTS Digital Surround DTS-ES Matrix 6.1 DTS-ES Discrete 6.1 DTS 96/24 Dolby Pro Logic Dolby Pro Logic II Music Dolby Pro Logic II Movie Dolby Pro Logic II Game Dolby Pro Logic IIx Music Dolby Pro Logic IIx Movie Dolby Pro Logic IIx Game DTS Neo:6 Music DTS Neo:6 Cinema HiFi DSP Programmes MUSIC ENTERTAINMENT STEREO HiFi DSP Subtotal Hall in Vienna The Bottom Line The Roxy Theatre Disco 6 Channel Stereo 5
RX-V461 / RX-V361 / HTR-DSP Programmes Compatible Decoding Formats Dolby Digital DTS Digital Surround Dolby Pro Logic Dolby Pro Logic II Music Dolby Pro Logic II Movie Dolby Pro Logic II Game HiFi DSP Programmes MUSIC STEREO HiFi DSP Subtotal Hall Jazz 5 Channel Stereo 3

CLASSICAL

CINEMA DSP Programmes Game ENTERTAINMENT TV Sports Pop/Rock Movie Spacious MOVIE Movie Dramatic CINEMA DSP Subtotal 5 Programme Total 8
LIVE/CLUB STEREO HiFi DSP Subtotal

LIVE/CLUB

STEREO HiFi DSP Subtotal
CINEMA DSP Programmes Standard Spectacle Sci-Fi MOVIE Adventure Drama Mono Movie Sports Action Game ENTERTAINMENT Roleplaying Game Music Video Recital/Opera CINEMA DSP Subtotal 11 Programme Total 22
CINEMA DSP Programmes Standard Spectacle Sci-Fi MOVIE Adventure Drama Mono Movie Sports Action Game ENTERTAINMENT Roleplaying Game Music Video CINEMA DSP Subtotal 10 Programme Total 17
CINEMA DSP Programmes MUSIC Pop/Rock TV Sports ENTERTAINMENT Mono Movie Game Spectacle Sci-Fi MOVIE THEATER Adventure General STANDARD Enhanced CINEMA DSP Subtotal 9 Programme Total 14

Standard

This programme creates a sound field emphasising the surrounding feeling without disturbing the original acoustic positioning of multichannel audio such as Dolby Digital and DTS.

Adventure

A sound field best suited for action and adventure movies. With toned reverberation, it recreates a clear and powerful space that values sideway expansion, good separation between channels.

Sports

This programme adds to the enjoyment of sport broadcasts and studio variety programmes with an enriched live feeling. In sports broadcasts, the announcers are heard in the centre while the surround sound offer listeners a feeling of presence in the stadium. This sound field has been optimized for role-playing and adventure games. It provides depth and 3D feeling during play, while offering movie-like surround effects movie scenes in the game.
Ambience Representations of DSP Programmes E/R (Early Reflections): Programme that uses the ambience data of early reflections. E/R + Rev (Reverberations): Programme that uses the ambience data of early reflections and reverb.
This programme recreates the vast space that matches a cinemascope size wide screen and features a sound field sensation with a broad dynamic range. Spectacle A striking sound field to vividly express the sound design of the latest SFX movies. It maintains a clear separation between the dialogue, sound effects and background music. Sci-Fi Mono Movie Drama
For dramas, musicals and comedies. Reverberations are modest but offer an optimum 3D feeling, reproducing effects tones and background music softly the clear dialogue with accurate positioning.

YSP-1100 4cm x 40 beam drivers and 11cm x 2 woofers 120 W total power: 2 W x 40 + 20 W x 2 1,030 x 194 x 118 mm 13 kg
YSP-1000 4cm x 40 beam drivers and 11cm x 2 woofers 120 W total power: 2 W x 40 + 20 W x 2 1,030 x 194 x 118 mm 13 kg DVD-SMHz/12-bit 192 kHz/24-bit (2ch x 4) 120 dB 2 Hz-20 kHz 2 Hz-44 kHz 106 dB 0.001% 435 x 107 x 309 mm 6.3 kg PianoCraft E810 RX-E810 Receiver 60 W + 60 W (60) 60/75/100 W 215 x 108 x 363 mm; 5.7 kg DVD-E810 CD/DVD Player 0.0035% 105 dB 97 dB 215 x 108 x 330 mm; 2.3 kg NX-E800 Speaker System 13cm cone 2.5cm dome 110 W/60 W 55 Hz28 kHz 186 x 300 x 223 mm; 4.3 kg NX-A01
YSP-900 4cm x 21 beam drivers and 10cm x 2 woofers 82 W total power: 2 W x 21 + 20 W x x 153 x 115 mm 9 kg DVD-SMHz/12-bit 192 kHz/24-bit 115 dB 2 Hz-20 kHz 2 Hz-44 kHz 105 dB 0.002% 435 x 87 x 285 mm 3.3 kg PianoCraft E410 RX-E410 Receiver 60 W + 60 W (60) 60/75/100 W 215 x 108 x 363 mm; 5.7 kg CDX-E410 CD Player 0.003% 105 dB 95 dB 215 x 108 x 334 mm; 2.8 kg NX-E800 Speaker System 13cm cone 2.5cm dome 110 W/60 W 55 Hz28 kHz 186 x 300 x 223 mm; 4.3 kg NX-U10 USB port Stereo L/R: 3.5mm stereo mini jack 10 W x 2 (instantaneous) Dual 3.8 cm full-range titanium cone 90 Hz20 kHz Windows Vista, XP, 2000, ME, 98SE Mac OS 9.1 or later, OS X 10.0 or later 248 x 100 x 33 mm 0.5 kg YST-SW225 Advanced YST II 20cm cone 120 W 150 W 28200 Hz 290 x 350 x 349 mm 11.5 kg YST-FSW100 Advanced YST II FD-Bass 16cm cone Half Pipe Port 75 W 130 W 30200 Hz 400 x 375 x 157 mm 9 kg
YSP-800 4cm x 21 beam drivers and 10cm x 2 woofers 82 W total power: 2 W x 21 + 20 W x x 153 x 115 mm 9 kg DVD-SMHz/12-bit 192 kHz/24-bit 105 dB 2 Hz-20 kHz 2 Hz-44 kHz 97 dB 0.0035% 435 x 51 x 310 mm 2.6 kg PianoCraft E700 RDX-E700 CD/DVD Receiver 30 W + 30 W
(1 kHz) (CD/VCD 44.1 kHz sampling) (DVD 96 kHz sampling) (1 kHz) (W x H x D)
(4 ohms, 1 kHz, 0.7% THD) (6 ohms, 20 Hz-20 kHz) (6/4/2 ohms)

(1 kHz) (1 kHz)

215 x 113 x 270 mm; 2.65 kg RDX-E700 CD/DVD Receiver 0.007% 95 dB 215 x 113 x 270 mm; 2.7 kg NX-E700 Speaker System 11 cm cone 2.5 cm dome 110 W/40 W 60 Hz28 kHz 165 x 255 x 183 mm; 3.4 kg

(Max/Nominal)

(Digital) (Analogue) (1 kHz, 10% THD)
Stereo L/R: 3.5mm stereo mini jack 4 W x 2 (maximum) Dual 3 cm full-range titanium cone 90 Hz20 kHz

(W x H x D)

84 x 89 x 84 mm 0.31 kg YST-SW515 Advanced YST II 25cm cone 250 W 270 W 20160 Hz 350 x 430 x 382 mm 19 kg YST-RSW300 Advanced YST II Front firing 25cm cone 250 W 270 W 20160 Hz 372 x 400 x 428 mm 20 kg

NS-PHz-30 kHz 6 ohms 2 satellites 150 W/50 W 150 x 265 x 156 mm; 2.2 kg/unit 2-way acoustic suspension 180 W/60 W 465 x 135 x 174 mm; 3.5 kg NS-C444 Dual 13cm PMD cone 2.5cm aluminium dome with Waveguide horn 250 W/100 W 55 Hz35 kHz 89 dB/2.83 V/1 m 6 ohms 514 x 190 x 213 mm 7.3 kg
NS-777 Dual 20cm PMD cone 13cm cone with Waveguide horn 2.5cm aluminium dome with Waveguide horn 250 W/100 W 30 Hz35 kHz 89 dB/2.83 V/1 m 6 ohms 276 x 1,100 x 390 mm 24.4 kg/unit
NS-555 Dual 16cm PMD cone 13cm cone with Waveguide horn 2.5cm aluminium dome with Waveguide horn 250 W/100 W 35 Hz35 kHz 88 dB/2.83 V/1 m 6 ohms 222 x 980 x 345 mm 20 kg/unit
9502 Series Woofers Midrange Driver Tweeter Input Power (Max/Nominal) Frequency Response Sensitivity Impedance Dimensions (W x H x D) Weight 8900 Series Woofers Tweeter Input Power (Max/Nominal) Frequency Response Sensitivity Impedance Dimensions (W x H x D) Weight 7900 Series Woofers Tweeter Input Power (Max/Nominal) Frequency Response Sensitivity Impedance Dimensions (W x H x D) Weight
NS-9502 Dual 16cm cone 13cm cone 2.5cm balanced-dome 250 W/50 W 40 Hz35 kHz 88 dB/2.83 V/1 m 6 ohms 310 x 1,170 x 371 mm 24 kg/unit NS-8900 Dual 16 cm cone 2.5cm dome 300 W/80 W 28 Hz to 38 kHz 89 dB/2.83 V/1 m 6 ohms 226 x 1,020 x 339 mm 23 kg/unit NS-7900 Dual 16cm cone 2.5cm soft dome 180 W/100 W 32 Hz25 kHz 88 dB/2.83 V/1 m 6 ohms 195 x 1,020 x 345 mm 17.5 kg/unit
NS-9002 16cm cone 13cm cone 2.5cm balanced-dome 250 W/50 W 40 Hz35 kHz 87 dB/2.83 V/1 m 6 ohms 310 x 1,120 x 371 mm 20 kg/unit NS-P8900 (Surround) 8cm cone 2.5cm balanced-dome 100 W/20 W 75 Hz to 20 kHz 85 dB/2.83 V/1 m 6 ohms 120 x 201 x 129 mm 1.5 kg/unit NS-6900 16cm cone 2.5cm soft dome 150 W/80 W 34 Hz25 kHz 87 dB/2.83 V/1 m 6 ohms 195 x 980 x 345 mm 16.5 kg/unit
NS-P9002 (Surround) 13cm cone 2.5cm balanced-dome 150 W/30 W 60 Hz to 35 kHz 87 dB/2.83 V/1 m 6 ohms 186 x 320 x 211 mm 5 kg/unit NS-P8900 (Centre) Dual 8cm cone 2.5cm balanced-dome 125 W/30 W 95 Hz to 20 kHz 89 dB/2.83 V/1 m 6 ohms 360 x 120 x 128 mm 2.5 kg NS-P7900 (Surround) 8cm cone 2.5cm balanced-dome 80 W/20 W 70 Hz40 kHz 85 dB/2.83 V/1 m 6 ohms 130 x 217 x 150 mm 1.9 kg/unit
NS-P9002 (Centre) Dual 13cm cone 2.5cm balanced-dome 250 W/50 W 60 Hz to 35 kHz 89 dB/2.83 V/1 m 6 ohms 500 x 174 x 205 mm 7 kg
NS-P7900 (Centre) Dual 8cm cone 2.5cm balanced-dome 100 W/25 W 70 Hz30 kHz 88 dB/2.83 V/1 m 6 ohms 395 x 130 x 150 mm 3.3 kg
AM/FM Stereo Receivers Output Power High Dynamic Power/Channel Linear Damping [Damping Factor] Signal-to-Noise Ratio Frequency Response FM Usable Sensitivity FM Selectivity FM Signal-to-Noise Ratio Dimensions Weight Integrated Stereo Amplifiers Output Power High Dynamic Power/Channel Linear Damping [Damping Factor] Signal-to-Noise Ratio Frequency Response Dimensions Weight CD Players Harmonic Distortion + Noise Frequency Response Signal-to-Noise Ratio Dynamic Range Dimensions Weight Digital Audio Recorder Frequency Response Playback/Recording S/N Ratio Playback/Recording Dynamic Range Playback/Recording THD + Noise Dimensions (W x H x D) Weight

(4 ohms, 1 kHz, 0.7% THD, Max) [8/4/2 ohms] (Speaker A) (CD) (DIN, Mono) (Two Signals) (DIN, Mono/Stereo) (W x H x D)
RX-W + 160 W 140/220/290 W 240 (8 ohms, 20 Hz20 kHz) 110 dB (CD Direct on) 10 Hz100 kHz 1 dB 1 V 70 dB 76 dB/70 dB 435 x 151 x 389 mm 10.9 kg AX-W + 120 W 130/185/220 W 240 (8 ohms, 20 Hz20 kHz) 110 dB 10 Hz-100 kHz 1 dB 435 x 151 x 390 mm 9.1 kg CDX-497 0.003% 0.5 dB 105 dB 95 dB 435 x 87 x 287 mm 3.5 kg
RX-W + 105 W 105/150/178 W 150 (8 ohms, 20 Hz20 kHz) 108 dB 10 Hz100 kHz 1 dB 1 V 70 dB 76 dB/70 dB 435 x 151 x 308 mm 8.7 kg AX-W + 95 W 100/140/150 W 240 (8 ohms, 20 Hz20 kHz) 110 dB 10 Hz-100 kHz 1 dB 435 x 151 x 390 mm 8.3 kg CDX-397 0.003% 0.5 dB 105 dB 95 dB 435 x 87 x 287 mm 3.5 kg
RX-W + 55 W 70//89/100 W 150 (8 ohms, 20 Hz20 kHz) 108 dB 10 Hz-100 kHz 1 dB 1 V 70 dB 76 dB/70 dB 435 x 146 x 308 mm 7.4 kg
(4 ohms, 1 kHz, 0.7% THD, Max) [8/4/2 ohms] (Speaker A) (CD/DVD Direct on) (W x H x D)

(1 kHz) (2 Hz-20 kHz)

CDC-697 0.003% 0.5 dB 106 dB 96 dB 435 x 116 x 403 mm 5.5 kg TX-497 0.2% 30 Hz-13 kHz 0.5dB 75 dB (mono), 70 dB (stereo) 435 x 86 x 271 mm 3.2 kg
CDR-HDHz-20 kHz 0.5 dB 105 dB / 92 dB 99 dB / 92 dB 0.004% / 0.006% 435 x 116 x 415 mm 8.2 kg (except HDD)
AM/FM Stereo Tuner Direct PLL IF Count Synthesizer Tuning FM Harmonic Distortion (1kHz, stereo) FM Frequency Response FM Signal-to-Noise Ratio Dimensions (W x H x D) Weight
HIFI Pack 106 RX-397 + CDX-397 + NS-333
AV Pack 207 RX-V461 + DVD-S661 + NS-P270
HIFI Pack 206 RX-497 + CDX-497 + NX-E800
RX-V661 + DVD-S1700 + Serie NS-325 + YST-SW325
HIFI Pack 306 RX-797 + CDX-497 + NS-325
RX-V1700 + DVD-S1700 + Serie NS-525 + YST-SW515
AV Pack 107 HTR-6030 + DVD-S661 + NS-P110
RX-V2700 + DVD-S2700 + Serie NS-525 + YST-SW515
d-cinema is the slogan of Yamaha A/V products and technology, reflecting our focus on digital technology and our leadership in creating and refining digital home theatre. Yamahas unique technology for the creation of sound fields is capable of powerfully reproducing the three-dimensional environment that movie sound engineers aim to convey, in any audio format from monaural to the latest multi-channel digital surround. It is compatible with DVD and all other A/V sources. Yamaha CINEMA DSP technology has received a patent in the U.S. (Patent No. 5,261,005). SILENT CINEMA is a trademark of Yamaha Corporation. PlayXchange is a registered trademark in the U.S. Yamaha has received a patent for PlayXchange technology in the U.S. (Patent No. 5,115,419).