CAUTION

0101AV-S70_caution_EN 2 3/29/0, 12:47 PM

PREPARATION

FEATURES

q Home Theater Sound

This system delivers a realistic and powerful sound experience like that found in a movie theater just by connecting the front speaker unit to the TV. You can also enjoy stronger bass and surround effects by adding the separately available YAMAHA NX-SW70, consisting of a subwoofer and two rear speakers.

CONTENTS

FEATURES... 1 GETTING STARTED.. 2 NAMES OF ALL PARTS.. 4 SPEAKER PLACEMENT.. 6 INSTALLATION.. 7 CONNECTIONS... 9 ADJUSTING THE SPEAKER OUTPUT LEVELS.. 15 PREPARATION
q Includes Dolby Digital* and Dolby Pro Logic Decoder
This system can reproduce the sound field of the software with the g or s logo mark.

q Virtual Surround

The front speaker unit can produce a virtual Dolby Surround sound field when playing software with the g or s logo mark so that you can enjoy surround effects that give motion to sound and make you feel like you are inside the action.

OPERATION

OPERATING THE UNIT... 17 USING CONVENIENT FUNCTIONS.. 18 DSP PROGRAM (DIGITAL SOUND FIELD PROCESSOR EFFECT).. 19 MENU FUNCTIONS.. 21
q Seven DSP programs including YAMAHA CINEMA DSP
Connecting the YAMAHA NX-SW70 (sold separately) allows seven different DSP programs to be used to enhance the power and realism of various sources, from movies, to concerts, and sporting events.

REMOTE CONTROL

OPERATING OTHER COMPONENTS USING THE REMOTE CONTROL.. 23

q Preset Remote Control

The remote control can be used to control not only the front speaker unit, but component from other manufacturers as well merely by setting the proper manufacturer code.

APPENDIX

GLOSSARY... 28 TROUBLESHOOTING.. 29 SPECIFICATIONS.. 30 INDEX.. 31
Manufactured under license from Dolby Laboratories. Dolby, Pro Logic and the double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished Works. Dolby Laboratories, Inc. All rights reserved.
y indicates a tip for your operation.

English

0102AV-S70_01-08_EN 1 3/29/0, 12:49 PM

GETTING STARTED

Checking the Package Contents
Check that the following accessories are included in the package.
Remote control Batteries (AAA, R03, UM-4 type) Audio connection cord (2 pin, 3m)

Velcro strips (2 sets)

Connection guide
Readying the Remote Control
s Inserting the batteries s Precautions regarding batteries
Misuse of dry cell batteries may result in leakage or bursting. Be sure to follow the precautions given below. Insert batteries with (+) and () oriented according to the marking in the battery compartment. Do not mix old and new batteries. Do not mix different types of batteries as they may offer different voltage and performance even though they have the same shape. Remove all batteries when they can no longer be used or when the remote control will not be used for an extended period. Do not use rechargeable batteries. If leakage occurs, wipe away all battery fluid inside the compartment. Preserving the manufacturer code Replace batteries early before they become unusable. The manufacturer code set by the user will be preserved for about two minutes when batteries run out or when they are removed. Note that the manufacturer code setting may be lost if more than two minutes elapses.

Remove the battery compartment cover.
Insert the four batteries (AAA, R03, UM-4 type) with + and oriented properly.
Close the battery compartment cover.
0102AV-S70_01-08_EN 2 3/29/0, 12:49 PM
Operational Area of the Remote Control
s Battery replacement cycle

Front speaker

Replace all four batteries when the operational range of the remote control starts to become shorter. PREPARATION
s Precautions on handling the remote control

Approx. 20 cm 6 m 30 30

The remote control may not be able to operate the front speaker unit when an object blocks the remote control sensor on the unit. Do not subject the remote control to impact. Do not allow it to get wet or place it in a location subject to high humidity. The remote control operations become difficult when direct sunlight or other strong light (such as from an inverter fluorescent lamp) strikes the sensor. Adjust the relative positions of the light and the front speaker if this happens. Remote control operations may not be possible if another remote control is being operated at the same time.
OPERATION REMOTE CONTROL APPENDIX English
0102AV-S70_01-08_EN 3 3/29/0, 12:49 PM

NAMES OF ALL PARTS

Front Speaker Unit (Front Panel)
INPUT selector button (page 17)
DSP selector button (page 20)

VOLUME +/ (page 17)

STANDBY indicator
POWER (page 17) Turns the units power on and off. This button also turns off the subwoofers power when a YAMAHA subwoofer and rear speakers NX-SW70 (sold separately) are connected. The STANDBY indicator will light when power is turned off using p on the remote control.

Display

VIRTUAL indicator (page 20)
TRUBASS indicator (page 18)

ENHANCED indicator

VIRTUAL TRUBASS DIGITAL ENHANCED SURROUND PRO LOGIC DSP
Processing indicators (page 20)
Display used for DSP program name, level, and operational status
0102AV-S70_01-08_EN 4 3/29/0, 12:49 PM

Remote Control

p (power) (page 17)

DSP ON/OFF (page 20)

Transmission indicator
Remote control selector buttons (page 23) Not used with this unit. VOL (page 17) m (page 18) SET/DSP (pages 20 and 23) VOL + (page 17) c (page 23)
Numeric buttons (page 23)
MENU (page 21) MENU (page 21)

MENU + (page 21)

SUBWOOFER + (page 18)

To prevent the front speaker unit from falling, secure it with the provided velcro strip when placing it on a television or other device. Also, use the height adjustment bracket on the rear of the front speaker unit when there is not enough space for installation or when the surface is sloped.

Using the Velcro Strips

Precautions before installation Do not touch the adhesive surface after peeling off the strip as this will weaken its adhesive strength. Thoroughly wipe clean the surface where the velcro strip is to be applied. Note that adhesive strength is weakened if the surface is dusty, oily or wet and that this may cause the front speaker unit to drop.
Peel off the seal of the velcro strip with the rough surface and apply to the protrusions on the bottom of the front speaker unit.
Wrap the strip tightly with sides of the tape well aligned with the edges of the protrusion. Rough surface
Peel off the seal of the velcro strip with the smooth surface and apply to the positions determined in step 2.

Peel off the seal.

Front speaker (bottom panel)

Smooth surface

Protrusion
Place the front speaker unit where it is to be installed (ex. on top of the television ) to determine where to apply the velcro strip with the smooth surface. Position so that the position of the velcro strip stuck to the front speaker unit matches that of the velcro strip stuck to the top of the television.
Align both the velcro strip on both sides and firmly press downward on the top of the front speaker unit.

Press down.

Once the front speaker unit is secured in this way, the paint on the television surface used for installation may peel off when velcro strip is removed later. Be sure to apply velcro strip after carefully checking the surface to be used for installation.
0102AV-S70_01-08_EN 7 3/29/0, 12:49 PM
Using the Height Adjustment Brackets
Loosen the screws securing the adjustment bracket.
s To further stabilize and prevent falling

Wire attachment hole

Loosen the screws.
Lower the bracket so that the front speaker unit is level and securely tighten the screws.
Secure the front speaker unit to the wall by attaching sufficiently strong wire to the wire attachment hole on the adjustment bracket. This prevents falling in two ways when this method is used together with velcro strip. This can prevent damage caused by the front speaker falling.

0103AV-S70_09-16_EN 10 3/29/0, 1:00 PM
s Connecting to a TV (monitor) without audio output terminals
AUDIO R AUDIO THROUGH R IN R OUT R

AUDIO THROUGH OUT L

AUDIO R IN R AUDIO R OUT R
Audio connection cord (commercially available)

R L INPUT

VIDEO OUT

VIDEO IN

There are two methods of making connection: 1. connecting only the VIDEO terminals or 2. connecting the THROUGH OUT terminals in addition to the VIDEO terminals. When only the VIDEO terminals are connected Connect the audio output terminals on the VCR to the VIDEO terminals on the front speaker unit using the provided audio connection cord. VCR audio may always be heard using the front speaker unit. Audio cannot be heard when the front speaker units power is turned off. (Audio cannot be heard from the TVs speakers either.) When VIDEO terminals and THROUGH OUT terminals are connected Connect the THROUGH OUT terminals of the front speaker unit to the audio input terminals of the TV (monitor) using a commercially available audio connection cord. VCR audio can be heard using the front speaker unit when the front speaker unit is turned on. Audio can be heard using the TV speakers when the front speaker unit is turned off.

APPENDIX English

0103AV-S70_09-16_EN 11 3/29/0, 1:00 PM
s Connecting a TV (monitor) to enjoy digital audio

Connect one of these

DIGITAL 2 ( /PCM) AUX
DIGITAL 1 ( /PCM) TV VIDEO

Anti-dust cap

Optical fiber cable (EIA standard) (commercially available) Audio connection cord (1 pin) (commercially available)
Anti-dust cap Remove the cap covering the DIGITAL 1 terminal (optical) when connecting an optical fiber cable. Safely store the cap and always re-insert it in the terminal when the terminal is not in use. (This cap prevents the entrance of dust.)

COAXIAL DIGITAL

OUTPUT OPTICAL DIGITAL
Connect the optical terminal or coaxial terminal of the LD or DVD player to the DIGITAL 1 (optical) terminal or DIGITAL 2 (coaxial) terminal of the front speaker unit using a commercially available optical fiber cable or audio connection cord (1 pin).
You need to make digital connection between this unit and your component to enjoy a Dolby Digital source. The audio of the LD or DVD player can be heard from the front speaker unit, but not from the TV speakers. The audio of the LD or DVD player cannot be heard when the front speaker units power is turned off. If your LD player has a Dolby Digital RF signal output terminal, be sure to use the RF demodulator (separately purchased). No sound will be heard when connecting your LD players Dolby Digital RF signal output terminal directly to this units DIGITAL 2 terminal.

0103AV-S70_09-16_EN 12 3/29/0, 1:00 PM
Connecting a CD Player or MD Recorder
Optical fiber cable (EIA standard) (commercially available)

AUDIO IN L L

Audio connection cord (1 pin) (commercially available)
Use the analog audio output terminals if there is no digital output terminal.
CD player, MD recorder, etc.
If the CD player or MD recorder has a digital output terminal, connect the optical or coaxial terminal on the CD player or MD recorder to the DIGITAL 1 (optical) terminal or DIGITAL 2 (coaxial) terminal on the front speaker unit using a commercially available optical fiber cable or audio connection cord (1 pin). If there is no digital output terminal, connect the analog audio output terminals on the CD player or MD recorder to the AUX input terminals on the front speaker unit using a commercially available audio connection cord (2 pin).
0103AV-S70_09-16_EN 13 3/29/0, 1:00 PM
Connecting the Front Speaker Unit and the Subwoofer
Although the front speaker unit alone can be used to reproduce rich, natural sounding audio, the additional use of a subwoofer allows you to enjoy powerful bass tones. Connecting a YAMAHA subwoofer and rear speakers NX-SW70 (sold separately) not only increases bass sensitivity but improves the surround effect as well.
Front speaker unit To SYSTEM CONNECTOR terminal
System connector cable provided with the YAMAHA NX-SW70 To SYSTEM CONNECTOR terminal Match the b mark on the plug with the a mark on the terminal and insert.
Turning off the front speaker units power will also turn off the YAMAHA subwoofer SW-AVS70.
When connecting your subwoofer, connect the input terminal on the subwoofer to the SUBWOOFER terminal on the front speaker unit using a commercially available audio connection cord (1 pin). For details regarding connections, please refer to the instruction manuals for your subwoofer or the owners manual for the YAMAHA subwoofer and rear speakers NX-SW70 (sold separately).
Connecting the AC Power Supply Cord
Once all connections have been made, check them one more time. Finally, insert the plug of the power supply cord for the front speaker unit into an AC outlet. Disconnect the power supply cord if you will not use the unit for an extended period.

0103AV-S70_09-16_EN 14 3/29/0, 1:00 PM
ADJUSTING THE SPEAKER OUTPUT LEVELS
When reproducing a Dolby Surround source using a DSP program such as DOLBY PRO LOGIC or DOLBY DIGITAL ENHANCED, it is necessary to adjust each channel to the same output level in order to bring out the full digital effect of these sound fields. Even when a different DSP program is used, it is possible to bring out the particular flavor of the sound field in question. Speaker output levels may be adjusted by using the remote control before playback by following the steps.
Press TEST. Test tones (like pink noise) will be output in the following order.
q When only the front speaker unit is being used or the VIRTUAL SURROUND DSP program is selected:

LEFT RIGHT

LEFT SURROUND

RIGHT SURROUND

(Virtual)
q When an NX-SW70 is connected:

LEFT CENTER RIGHT

Press p to turn on the power.

Rear speakers

If the STANDBY indicator is lit, turn on the power using p on the remote control. If the main power is off (when the STANDBY indicator is not lit), turn on the power by pressing POWER on the front speaker unit.
0103AV-S70_09-16_EN 15 3/29/0, 1:00 PM
If only the front speaker unit being used, be sure to adjust the level of the right and left rear virtual channels to match the level of the right and left main channels. (Rear virtual channels sound as if rear speakers are behind the listener.) If an NX-SW70 is connected, adjust so that the level of the center channel (built into the front speaker unit) and rear channels (NXSW70 rear speakers) match the level of the right and left main channels (built into the front speaker unit).
When an NX-SW70 is connected, you can adjust the center channel. If the right and left main channels have been adjusted, adjust the level of the center and right and left rear channels (or right and left rear virtual channels) one more time. The right and left rear virtual channels cannot be adjusted separately. Adjusting either of the virtual channels sets the other virtual channel to the same level.

When the adjustment is complete, press TEST. A test tone will stop.
Adjust the level of the test tone using VOL +/. (This sets the standard audio level you will be using.) Pressing VOL + increases the level, while pressing VOL decreases the level.
The level can be adjusted in the following range. When only the front speaker unit is being used or the VIRTUAL SURROUND DSP program is selected: Right and left main channels: 10 to 0 dB Rear virtual channels: 3 to +3 dB The minimum level for the main channel is 10 dB, while that for the rear virtual channels is 3 dB. When an NX-SW70 is connected: Right and left main channels: 10 to 0 dB Center channel: 20 to +3 dB Right and left rear channels: 20 to +6 dB The minimum level for the main channel is 10 dB, while that for the rear channels is 20 dB.
Adjust the level of each channel while listening to the test tone. Pressing f increases the level, while pressing w decreases the level.
0103AV-S70_09-16_EN 16 3/29/0, 1:00 PM

OPERATING THE UNIT

Enjoying the Home Theater Sound System
This section describes how to select audio output from A/V component such as a TV, VCR, or DVD, LD, CD player, or MD recorder as input source to the Home Theater Sound System AV-S70 and how to adjust levels. First turn on the playback component and the TV, and then follow the steps given below. PREPARATION
Press POWER (or p on the remote control) to turn on the power.
Adjust the level using VOLUME +/ (or VOL +/ on the remote control). Pressing VOLUME + (or VOL + on the remote control) increases the level, while pressing VOLUME (or VOL on the remote control) decreases the level.

Front panel

Remote control
Press the INPUT selector button. Each time the button is pressed, the input source will be switched in the order: VIDEO TV AUX DIGITAL 1 DIGITAL 2.
0104AV-S70_17-22_EN 17 3/29/0, 4:31 PM
USING CONVENIENT FUNCTIONS
You can use convenient functions with the remote control during audio reproduction.
Listening to music clearly at low levels

Press NIGHT MODE.

Sounds will be clear. Use this function when it is difficult to output high volumes such as late at night. To cancel NIGHT MODE, press NIGHT MODE again.
Volume cannot be decreased using this button. To decrease the volume, press VOLUME (or VOL on the remote control).
Increasing the power of the midrange

Press t.

Adjusting the subwoofer level
Subwoofer level can be adjusted if a subwoofer is connected. Pressing SUBWOOFER + increases the level, while pressing SUBWOOFER decreases the level.
The level can be adjusted within the range 20 dB to +10 dB.
Temporarily reducing the audio

Press m.

The TRUBASS* indicator will light in the display. This will increase the level of the mid-range, giving more force to dialog and song lyrics. To cancel TRUBASS mode, press t again. *

INPUT selector button

The Auto Power function may not function properly depending on the signal output level of connected component. In this case, you can refer to the table given below to change the sensitivity of the Auto Power function. Pressing + will cycle through the selections from top to bottom, while pressing will cycle through the selections from bottom to top.
Display OFF 1 Setting/Symptom Do not use the Auto Power function. When Auto Power On does not function even though a signal arrives or when Auto Power Off results even though there is a continuing signal. Ordinary setting when using the Auto Power function. When Auto Power On results even though no signal has arrived, or when Auto Power Off does not result even though there is no current signal.

MENU +/ MENU

To cancel the menu functions, press MENU until the input display returns.
Adjusting Display Brightness
The display brightness of the front speaker unit can be adjusted as follows. REMOTE CONTROL
Setting Auto Power On/Off
Auto Power functions as described below. 1. No input signal and no buttons have been operated for 30 minutes. 2. Auto Power Off automatically shuts off the power. (The STANDBY indicator will slowly flash.) 3. If a signal is input, Auto Power On automatically turns the power on. (Or power can be turned on again using p on the remote control.) You can set sensitivity for the Auto Power function or turn the Auto Power function off completely.
Press MENU to display Dimmer. The currently brightness level (such as Dimmer: 0) will be displayed.
Press MENU + or to adjust the brightness. Pressing + will brighten the display, while pressing will dim the display. Brightness can be adjusted from 3 (dimmest) to +3 (brightest). APPENDIX
Press MENU to display Auto Power.
To set Auto Power On, use the MENU + or to select the Auto Power 2. To set Auto Power Off, use the MENU to select the OFF.
0104AV-S70_17-22_EN 21 3/29/0, 4:31 PM

Naming Input

It is possible to give names to the AUX, DIGITAL 1 and DIGITAL 2 input terminals. (It is not possible to change the input names for the TV or VIDEO input terminals.) This function makes selecting input source easier by allowing you to give a name that quickly allows you to see which component is connected to the terminal in question. For example, if an MD recorder is connected to the AUX, you can name that source MD, or if a DVD player is connected to the DIGITAL 1 terminal, you can name that source DVD.

You can repeat steps 1 through 3 to give names to AUX, DIGITAL 1 and DIGITAL 2 input terminals.

Adjusting the Delay Time

When the selected DSP program is DOLBY DIGITAL/ DOLBY PRO LOGIC or DOLBY DIGITAL ENHANCED/ DOLBY PRO LOGIC ENHANCED, it is possible to adjust the delay time. The delay time is that time difference between when the main channel sound can be heard and the surround sound can be heard. Although it is possible to set the delay time separately for Dolby Digital and Dolby Surround input, if the Dolby Digital (or Dolby Surround) delay time is adjusted, the level for Dolby Surround (or Dolby Digital) will also be raised or lowered accordingly. Setting a longer delay time makes the sound field feel larger, while setting a shorter delay time makes it feel smaller.
Press MENU to display Input Name.
Press the INPUT selector button and select the input you want to name (AUX, DIGITAL 1 or DIGITAL 2).
Press MENU + or to select the name.
Press MENU to display Delay Time.
If you select AUX under step 2 above, names will be displayed in the following order when you press +.
AUX AUX: GAME AUX: MD AUX: CD AUX: LD AUX: VIDEO2 AUX: CABLE AUX: SAT AUX: DVD
Press MENU + or to adjust the delay time.
Adjustable range For Dolby Digital input: 0 to +15 ms For Dolby Surround input: 15 to 30 ms
If you select DIGITAL 1 or 2 under step 2 above, names will be displayed in the following order when you press +.
DIGITAL 1 D1: MD D1: DVD D1: CD D1: LD D1: SAT
The variable sound intensity range is large in the case of CDs and MDs. Listening for an extended period of time at or near maximum volume to music that includes sudden changes from soft to loud noises may damage the speakers.
D1: is displayed before the name when DIGITAL 1 has been selected, while D2: is displayed before the name when DIGITAL 2 has been selected. Pressing displays the names in reverse order.
0104AV-S70_17-22_EN 22 3/29/0, 4:31 PM
OPERATING OTHER COMPONENTS USING THE REMOTE CONTROL
Setting the manufacturer code for your TV, VCR or satellite tuner/cable TV on the remote control allows you to operate the front speaker unit and your TV, VCR or satellite tuner/cable TV by remote control. Note that there are two methods for setting the code: manual preset and auto preset.

s Precautions when performing preset
The transmission indicator will go out once the manufacturer code has been set properly. If the transmission indicator does not go out, or if it flashes and then goes out, repeat the procedure from step 1. Pay attention to the following points when you repeat the preset procedure. Check the manufacturer code number. Check that the correct remote control selector button has been selected when setting the manufacturer code. If more than one code is given for a manufacturer, try entering each code in the order given. Remove and replace the remote controls batteries (complete this step within 2 minutes) and then repeat the procedure.
Point the remote control at the component to be controlled (the component turned on in step 1) and press p repeatedly until the components power turns off.
s To clear a manufacturer code
If the transmission indicator flashes twice, this indicates that you have cycled through all the codes stored in the memory of the remote control. Up to 300 manufacturer codes (for TV) may be stored in the memory of the remote control. Since a manufacturer code is set by pressing p and cycling in order through these codes, you may need to press p up to 300 times to reach the proper code. Perform the procedure Using manual preset described on page 23 and enter the following codes when you reach step 3. To clear the TV button: 0000 To clear the VCR button: 0000 To clear the SAT button: 0000 To clear all buttons for TV, VCR and SAT: 9990
Up to 120 manufacturer codes for VCR, 170 for satellite tuner and 20 for cable TV may be stored in the memory of the remote control.
If you accidentally press p too many times after the power is turned off, you may press m the same number of times to go through the manufacturer codes in reverse order. The correct manufacturer code will not be set unless you do this.
0105AV-S70_23-30_EN 25 3/29/0, 4:04 PM

Controlling a TV

You can control your TV by setting the corresponding manufacturer code for the remote control selector button TV.

Press TV.

TV power ON/OFF
Decreases TV volume Selects the next lower channel Mutes the TV
Selects the next higher channel Increases TV volume
Selects TV input Used to select the channel
Used to select the channel/program
Used to select 2-digit channels Fast forwards the VCR* Rewinds the VCR* Plays the VCR* Stops the VCR*

Pauses the VCR*

Records on the VCR*
A VCR can be controlled using * marked buttons once the manufacturer code for that VCR has been set for the remote control selector button VCR.
0105AV-S70_23-30_EN 26 3/29/0, 4:04 PM

Controlling a VCR

You can control your VCR by setting the corresponding manufacturer code for the remote control selector button VCR.

Press VCR.

VCR power ON/OFF

s Dolby Surround

In movie theaters and in live theaters, the spectators are surrounded by many speakers and sound effects geared to each scene are used to make sound move from front to back and right to left. This gives the sound a three dimensional feel that surrounds the entire body. Dolby Surround is used to implement this realistic effect. Originally, the Dolby Surround system consisted of a total of four channels: two front channels (right and left), one center channel, and one rear channel. Later, two-channel stereo compatibility was added to for broadcast and video media used in the home. The ability to easily set up a home AV system capable of stereo reproduction is one of the biggest features of Dolby Surround.

s Dolby Digital

Dolby Digital consists of a total of five channels: three front channels and two rear channels, plus a distinct LFE channel for low frequency effect. It is therefore commonly referred to as a 5.1 channel system. Using digital compression technology for all 5.1 channels, Dolby Digital can be used for completely independent audio reproduction. Dolby Digital offers superior sound quality and a more three dimensional surround effect in comparison to the older Dolby Surround, which mixes four channels (three front and one rear) into two-channel stereo and separates them using a matrix circuit.
0105AV-S70_23-30_EN 28 3/29/0, 4:04 PM

TROUBLESHOOTING

Be sure to investigate thoroughly before requesting repairs or after service. If it cannot be corrected, or if the problem is not listed in the SYMPTOM column, disconnect the power cord and contact your authorized YAMAHA dealer or service center.
Sometimes the unit may cease to recognize operations due to a mistaken operation or as a result of strong external noise (such as irregular voltage due to shock of impact, excessive static electricity, or lightning strike). If this happens, first disconnect the power cord, wait about 30 seconds, re-connect the power cord, and try the desired operation again. When requesting repairs or after service of the YAMAHA subwoofer and rear speakers NX-SW70 (sold separately), be sure to bring along with this unit.

s General

SYMPTOM No sound output at all. CHECK Is the AC power supply cord connected? Is the TV or VCR connected correctly? Is the input source selected correctly? Has this units audio temporarily been lowered? A humming noise is present. Hum caused by external electromagnetic waves may be generated. Try inverting the right-left polarity of the power cord and re-insert into the AC outlet. The unit is in Auto Power Off mode. Turn off the main power if the unit is not to be used for an extended period of time. Is a tuner or TV that uses an indoor antenna located near the unit? Use of an outdoor antenna is recommended. Refer to page 12 17

CHAPARRAL 0013, 0693, 1003 COLUMBUS 0613 CONNEXIONS 0303, 0423 DISCUS ELIPSE 0853, 0863 DISKXPRESS 0423, 0473 DRAKE 0003 ECHOSTAR 0223, 0233, 0603, 0623, 0663, 0923, 0993, 1043, 1053, 1063, 1103 ELTA 1283 ELTA SAT 0143 EURODEC 1223, 1233, 1243 EUROSTAR 0993 FERGUSON 0043, 0173, 0183, 0293, 0843 0953, 1303 FINLUX 0973 FOXTEL 1463, 1523 FRACARRO 0023, 0533, 0773 FUBA 0473, 0613, 0633, 1053 GIUCAR RECORD 0203, 0333 GRUNDIG 0173, 0943, 0953, 0963 HIGH PERFORMANCE 0913 HIRSCHMANN 0753, 0963, 1403, 1413, 1423, 1433, 1443 HITACHI 0443, 0513, 0703, 0943 ICX INTERNATIONAL 0883 INNOVATION 2711 ITT/NOKIA 0063, 0123, 0173, 0443, 1153 JEEMON 0143 JERROLD 0843, 0983 JOHANSSON 0243 JVC 1273 KATHREIN 0113, 0263, 0273, 0363, 1393 KOSMOS 0263 KYOSTAR 1033, 1083 LENG 0243 LIFESAT 1323, 1343, 1353, 2711 LUXOR 0123, 0133, 0443, 0463, 0503, 1153 MACAB 0353 MASPRO 0013, 0113, 0253, 0953 MEDION 1323, 1343, 2711 METZ 0963 MICROMAXX 1323, 1343, 2711 MITSUBISHI 0963 MORGANS 0593 MURATTO 0403 NEC 0283, 0313, 0763, 0783, 0833 NETWORK 0043 NIKKO 1133, 1143 NOKIA 0063, 0123, 0173, 0443, 1153, 1163, 1333 NORSAT 0783 OTTO VERSAND 0963 PACE 0043, 0173, 0293, 0933, 0953, 1303, 1493, 1523
PACE(ONdigital) 1493 PACE MSS 0943 PALCOM 0613, 0683, 0703 PALSAT 0393 PALTEC 0703 PANSAT 1073 PANASONIC 0803, 1303, 1463 PHILIPS 0323, 0343, 0473, 0953, 1123, 1183, 1193, 1203, 1213, 1303, 1313, 1533 PHILIPS(ONdigital) 1533 PROSAT 1173 PTT TELECOM 0303, 0893 QUELLE 0963 RADIX 1053 REDIFFUSION 0313, 0783 RFT 1183, 1193, 1203, 1213 SAGEM 1253 SAKURA 0563, 0813 SALORA 0063, 0123, 0133, 0443, 0453, 0483, 0493, 0573 SAMSUNG 0743, 0753, 1563 SAT 0403 SATCOM 0893 SATECO 0643 SATELLITE 1543 SECTOR 1263 SEDEA 1093 SENTRA 0413 SIEMENS 0893, 0963 SINTRACK 0903 SKY 1453 SKYLAB 0473 SKYSCAN 0873 SONY 0733, 0943 STELLA 0303 STRONG 0153, 0393, 1033, 1083 STV 0633 SUN/MOON/STAR 1473 TANDBERG 1113 TANDY 0913 TANTEC 0613 TATUNG 0513, 0543 TECHNISAT 0083, 0093, 0523, 0553, 1053 TELECOM 0303 TELEMAX 0583 TELEVES 1483, 1503, 1513, 1553 THORN-FERGUSON 0043, 0073, 0173, 0183, 0953 TOSHIBA 0943 TPS 1373 TRIAD 0403 UNIDEN 0033, 0213, 0673, 0713, 0723 US ELECTRONICS 0883 VORTEC 0753, 1033, 1073 VTECH 0433 WINERSAT 0243 WISI 0053, 0353, 0373, 0383, 0403, 0653, 1053, 1153 WOLSEY 0913 XSAT 1383 ZEHNDER 0263, 0403 ZENDER 0403

Cable TV

AUSTAR 0194 CABLETIME 0084, 0094, 0114 CLYDE CABLEVISION 0064 FILMNET 0034, 0074 FOXTEL 0154, 0164, 0174 FRANCE TELECOM 0024 GEC 0064 G.I. 0194 JERROLD 0054 MOVIE TIME 0104 NSC 0104 OPTUSVIS 0184 PHILIPS 0024 SAMSUNG 0134 SCIENTIFIC ATLANTA 0124, 0144 STARCOM 0054 STS 0104 TELE 0074 TELE + TELESERVICE 0044, 0114 TUDI 0014 UNITED CABLE 0054 ZENITH 0044
08AV-S70_code 4 3/29/0, 6:08 PM

connection guide

3/29/0, 3:14 PM

AV-S70

VOLUME
NATURAL SOUND HOME THEATER SOUND SYSTEM AV-S70

D I G I T A L

VIRTUAL TRUBASS
V DIGITAL ENHANCED V SURROUND V PRO LOGIC DSP

14 ~ 1 6