Hyo1.fm Page 1 Thursday, September 25, 2003 2:59 AM
AX10/AX12/AX15 AX12M/AX15M

SUBWOOFER

Owners Manual
Thank you for choosing the YAMAHA speaker system. In order to take maximum advantage of the speakers features and ensure maximum performance and longevity, please read this manual carefully before using the speaker system. Keep the manual in a safe place for future reference.

Mode demploi

Nous vous remercions d'avoir achet les enceintes YAMAHA. Pour obtenir les performances optimales de vos enceintes et garantir une longvit maximale, lisez attentivement ce mode d'emploi avant d'utiliser les enceintes. Conservez-le en lieu sr pour pouvoir vous y rfr er ultrieurement.

Contents

PRECAUTIONS... 3 Before Making Connections.. 4 Specications... 5

Table des matires

PRECAUTIONS D'USAGE..9 Avant d'effectuer les connexions..10 Fiche technique...11

Bedienungsanleitung

Wir beglckwnschen Sie zum Kauf dieses YAMAHA-Lautsprechersystems. Damit Sie die Ausstattungen dieses Lautsprechersystems optimal nutzen knnen, und um maximale Leistung und Lebensdauer sicherzustellen, lesen Sie bitte vor der Inbetriebnahme diese Anleitung sorgfltig durch. Bitte bewahren Sie diese Bedienungsanleitung gut auf, um bei Bedarf darauf zurckgreifen zu knnen.

Manual de instrucciones

Gracias por escoger el sistema de altavoces YAMAHA. A n de aprovechar al mximo las caractersticas de los altavoces y obtener un rendimiento y durabilidad ptimos, lea atentamente este manual antes de utilizar el sistema. Guarde este manual en un lugar seguro para futuras consultas.

Inhalt

VORSICHTSMASSNAHMEN.. 6 Vor dem Anschlieen... 7 Technische Daten... 8
PRECAUCIONES...12 Antes de efectuar conexiones..13 Especicaciones...14

ESPAOL

FRANAIS

DEUTSCH

SPEAKER SYSTEM

ENGLISH

PLEASE READ CAREFULLY BEFORE PROCEEDING
* Please keep this manual in a safe place for future reference.

WARNING

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages, re or other hazards. These precautions include, but are not limited to, the following:

Do not open

Do not open the device or attempt to disassemble the internal parts or modify them in any way. The device contains no userserviceable parts. If it should appear to be malfunctioning, discontinue use immediately and have it inspected by qualied Yamaha service personnel.

Water warning

Do not expose the device to rain, use it near water or in damp or wet conditions, or place containers on it containing liquids which might spill into any openings.

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the device or other property. These precautions include, but are not limited to, the following:

Location

If you use a stand, check the stands specications and make sure that it is sturdy enough to support the weight of the speaker. You may need to limit the number of people around the placed stand, in order to avoid toppling the device or causing damage to the internal components. If you use the TS-80 and TS-90 speaker stands manufactured by Ultimate Systems (sold separately) to support the AX10/ AX12/AX15/AX12M/AX15M speaker models, be sure to keep the following cautions. Use the speaker stands with their legs fully opened. Place only one speaker on each speaker stand. Tighten fastening screws securely. Remove the speakers from the stands before moving the stands or adjusting their height. Add weight such as sand bags around the stand legs to prevent them from falling over. Use the stand at a maximum height of 140 cm. If you use a metal socket of the AX15W subwoofer to allow mounting of a satellite speaker, use a pole shorter than 90cm with an outer diameter of 35mm. When transporting or moving the device, always use two or more people. Before moving the device, remove all connected cables. Do not expose the device to excessive dust or vibrations, or extreme cold or heat (such as in direct sunlight, near a heater) to prevent the possibility of panel disguration or damage to the internal components. Do not place the device in an unstable position where it might accidentally fall over.

Connections

Before connecting the device to other devices, turn off the power for all devices. Before turning the power on or off for all devices, set all volume levels to minimum. Use only speaker cables for connecting speakers to the speaker jacks. Use of other types of cables may result in re. Be sure to observe the ampliers rated load impedance (see page 5), particularly when connecting speakers in parallel. Connecting an impedance load outside the ampliers rated range can damage the amplier.

Handling caution

Always turn AC power to the power amplier on last in any audio system to avoid speaker damage. When turning power off, the power amplier should be turned off rst for the same reason.

PRECAUTIONS

This product, when used in combination with amplication and/or additional loudspeakers, may be capable of producing sound levels that could cause permanent hearing loss. DO NOT operate at high volume levels or at a level that is uncomfortable. If you experience any discomfort or ringing in the ears, or suspect an hearing loss, you should consult an audiologist.

Poly Switch

All full-range loudspeakers are tted with a self-resetting poly switch that protects the high-frequency driver from damage caused by excessive power. If a loudspeaker cabinet loses high-frequency output, immediately remove power from the unit and wait for two to three minutes. They should allow the poly switch to reset. Re-apply power and check the performance of the high-frequency driver before continuing with the power reduced to a level that does not cause the poly switch to interrupt the signal. In any system using two or more speakers, be sure to match the connection polarities of all speakers to the amplier(s) e.g. always connect + to + and - to -. If the polarities are not properly matched the speakers will be driven out of phase and the sound will suffer. Use only Neutrik NL4FC plugs for connecting Speakon connectors. Yamaha cannot be held responsible for damage caused by improper use or modications to the device. * Illustrations in this manual are for explanatory purposes only, and may not match the actual appearance of the product during operation. * Company names and product names used in this Owners Manual are trademarks or registered trademarks of their respective owners.

To protect your speakers

When choosing a power amplier to use with your speakers, make sure that its power output matches the speakers power capacity (refer to the Specications on page 5). Even if the ampliers power output is lower than the speakers PGM (program) power capacity, the speakers may be damaged when clipping of a high input signal occurs. The following may cause damage to speakers: Feedback caused when using a microphone. Continuous high sound pressure level produced by electronic instruments. Continuous high-power output distorted signals. Popping noises caused by turning on equipment, or by connecting or disconnecting system components while the amplier is turned on.
Before Making Connections

I Phone Plug Wiring

Phone plugs for connection to the phone jack inputs should be wired as shown to the right. Be sure to use proper speaker cable NOT shielded instrument or line cable for all speaker connections.
I Neutrik NL4FC Plug Wiring
If you will be using the Neutrik connectors for speaker input, wire the plugs as shown to the right. Be sure to use proper speaker cable NOT shielded instrument or line cable for all speaker connections.
2 (NO USE) 1+ : HOT(+) 1 :COLD () Neutrik NL4FC connector 2+ (NO USE)
The subwoofer AX15W features four input/parallel connectorstwo 1/4 phone jacks and two Neutrik NL4MP connectors. Use either a phone jack or a Neutrik connector to receive input from your sound system/power amplier. One of the spare connectors can be used to parallel-connect an additional main speaker (keeping in mind the impedance considerations mentioned below).
I Impedance Considerations
When connecting speakers in parallel be sure to check the rated load impedance of the power amplier. Most power ampliers are capable of safely driving speakers with minimum impedance of 8 ohms or 4 ohms. A pair of parallelconnected 8-ohm speakers have a total impedance of 4 ohms. The AX10/AX12/AX15/AX12M/AX15M are 8-ohm speakers, and two of these can safely be paralleled on one output. Two or more speakers can be connected in parallel, however, if you are using a power amplier that can safely drive load impedances of 4 ohms or lower.

Specications

AX15 AX12M 2 way Bass reex type LF 10" cone 12" cone 15" cone 12" cone Speaker Unit HF 1" VC, Horn-TW Frequency Response 65Hz-20kHz 60Hz-20kHz NOISE* 125W 150W 200W 150W Power Capacity PGM 250W 300W 400W 300W MAX 500W 600W 800W 600W Nominal Impedance 8 Sensitivity 96dB SPL (1W, 1m) 97dB SPL (1W, 1m) 98dB SPL (1W, 1m) 97dB (1W, 1m) Input Connectors Dimensions (WHD) Weight *: EIA RS-12.5kg 1/4" phone jack 1, SPEAKON Neutrik NL4MP 16.5kg 375 21.5kg 325 16.5kg 355 20kg Model Enclosure AX10 AX12 AX15M 15" cone AX15W Bass reex type 15" cone 50Hz-200Hz 250W 500W 1000W

200W 400W 800W

98dB SPL (1W, 1m)
97dB (1W, 1m) 1/4" phone jack 2, SPEAKON Neutrik NL4MP 26.5kg

AX10/AX12/AX15

AX12M/AX15M

Unit: mm

Specications and descriptions in this owners manual are for information purposes only. Yamaha Corp. reserves the right to change or modify products or specications at any time without prior notice. Since specications, equipment or options may not be the same in every locale, please check with your Yamaha dealer.
I Subwoofer Parallel-connection
For details of products, please contact your nearest Yamaha representative or the authorized distributor listed below. Pour plus de dtails sur les produits, veuillez-vous adresser Yamaha ou au distributeur le plus proche de vous gurant dans la liste suivante.
Die Einzelheiten zu Produkten sind bei Ihrer unten aufgefhrten Niederlassung und bei Yamaha Vertragshndlern in den jeweiligen Bestimmungslndern erhltlich. Para detalles sobre productos, contacte su tienda Yamaha ms cercana o el distribuidor autorizado que se lista debajo.

NORTH AMERICA

CANADA
Yamaha Canada Music Ltd. 135 Milner Avenue, Scarborough, Ontario, M1S 3R1, Canada Tel: 416-298-1311

BELGIUM/LUXEMBOURG

Yamaha Music Central Europe GmbH, Branch Belgium Rue de Geneve (Genevastraat) 10, 1140 - Brussels, Belgium Tel: 02-726 6032

INDONESIA

PT. Yamaha Music Indonesia (Distributor) PT. Nusantik Gedung Yamaha Music Center, Jalan Jend. Gatot Subroto Kav. 4, Jakarta 12930, Indonesia Tel: 21-520-2577

U.S.A.

Yamaha Corporation of America 6600 Orangethorpe Ave., Buena Park, Calif. 90620, U.S.A. Tel: 714-522-9011

FRANCE

Yamaha Musique France BP 70-77312 Marne-la-Valle Cedex 2, France Tel: 01-64-61-4000
Yamaha Music Korea Ltd. Tong-Yang Securities Bldg. 16F 23-8 Yoido-dong, Youngdungpo-ku, Seoul, Korea Tel: 02-3770-0660
Yamaha Musica Italia S.P.A. Combo Division Viale Italia 88, 20020 Lainate (Milano), Italy Tel: 02-935-771
CENTRAL & SOUTH AMERICA

MEXICO

Yamaha de Mexico S.A. De C.V., Departamento de ventas Javier Rojo Gomez No.1149, Col. Gpe Del Moral, Deleg. Iztapalapa, 09300 Mexico, D.F. Tel: 55-5804-0600

MALAYSIA

Yamaha Music Malaysia, Sdn., Bhd. Lot 8, Jalan Perbandaran, 47301 Kelana Jaya, Petaling Jaya, Selangor, Malaysia Tel: 3-78030900

SPAIN/PORTUGAL

Yamaha-Hazen Msica, S.A. Ctra. de la Coruna km. 17, 200, 28230 Las Rozas (Madrid), Spain Tel: 91-639-8888

SINGAPORE

Yamaha Music Asia Pte., Ltd. No.11 Ubi Road 1, No.06-02, Meiban Industrial Building, Singapore Tel: 747-4374

BRAZIL

Yamaha Musical do Brasil LTDA. Av. Rebouas 2636, So Paulo, Brasil Tel: 011-3085-1377

SWEDEN

Yamaha Scandinavia AB J. A. Wettergrens Gata 1 Box 30053 S-Gteborg, Sweden Tel: 34 00

TAIWAN

Yamaha KHS Music Co., Ltd. 3F, #6, Sec.2, Nan Jing E. Rd. Taipei. Taiwan 104, R.O.C. Tel: 02-2511-8688

ARGENTINA

Yamaha Music Latin America, S.A. Sucursal de Argentina Viamonte 1145 Piso2-B 1053, Buenos Aires, Argentina Tel: 1-4371-7021

DENMARK

YS Copenhagen Liaison Ofce Generatorvej 8B DK-2730 Herlev, Denmark Tel: 49 00

THAILAND

Siam Music Yamaha Co., Ltd. 121/60-61 RS Tower 17th Floor, Ratchadaphisek RD., Dindaeng, Bangkok 10320, Thailand Tel: 02-641-2951
PANAMA AND OTHER LATIN AMERICAN COUNTRIES/ CARIBBEAN COUNTRIES
Yamaha Music Latin America, S.A. Torre Banco General, Piso 7, Urbanizacin Marbella, Calle 47 y Aquilino de la Guardia, Ciudad de Panam, Panam Tel: +507-269-5311

NORWAY

Norsk lial av Yamaha Scandinavia AB Grini Nringspark 1 N-1345 sters, Norway Tel: 77 70
THE PEOPLES REPUBLIC OF CHINA
Yamaha Music & Electronics (China) Co., Ltd. Shanghai Branch United Plaza 25F 1468 Nan Jing Road West Jingan Shanghai 200040, China Tel: 21-6247-2211

OTHER EUROPEAN COUNTRIES

Yamaha Music Central Europe GmbH Siemensstrae 22-34, 25462 Rellingen, Germany Tel: +49-4101-3030

EUROPE

THE UNITED KINGDOM
Yamaha-Kemble Music (U.K.) Ltd. Sherbourne Drive, Tilbrook, Milton Keynes, MK7 8BL, England Tel: 01908-366700

OTHER ASIAN COUNTRIES

Yamaha Corporation, Asia-Pacic Music Marketing Group Nakazawa-cho 10-1, Hamamatsu, Japan 430-8650 Tel: +81-53-460-2313

AFRICA

GERMANY
Yamaha Music Central Europe GmbH Siemensstrae 22-34, 25462 Rellingen, Germany Tel: 04101-3030

OCEANIA

AUSTRALIA
Yamaha Music Australia Pty. Ltd. Level 1, 99 Queensbridge Street, Southbank, Victoria 3006, Australia Tel: 3-9693-5111

MIDDLE EAST

TURKEY/CYPRUS
SWITZERLAND/LIECHTENSTEIN
Yamaha Music Central Europe GmbH, Branch Switzerland Seefeldstrasse 94, 8008 Zrich, Switzerland Tel: 01-383 3990

OTHER COUNTRIES

Yamaha Music Gulf FZE LB21-128 Jebel Ali Freezone P.O.Box 17328, Dubai, U.A.E. Tel: +971-4-881-5868
COUNTRIES AND TRUST TERRITORIES IN PACIFIC OCEAN

AUSTRIA

Yamaha Music Central Europe GmbH, Branch Austria Schleiergasse 20, A-1100 Wien, Austria Tel: 01-60203900

THE NETHERLANDS

Yamaha Music Central Europe, Branch Nederland Clarissenhof 5-b, 4133 AB Vianen, The Netherlands Tel: 0347-358 040
HEAD OFFICE Yamaha Corporation, Pro Audio & Digital Musical Instrument Division
Nakazawa-cho 10-1, Hamamatsu, Japan 430-8650 Tel: +81-53-460-2441
Yamaha Manual Library http://www2.yamaha.co.jp/manual/english/ U.R.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation 2003 Yamaha Corporation 310CR-01A0 Printed in Poland

AX1 -0

Natural Sound Stereo Integrated Amplifier Prampli/ampli de puissance stro de la srie Natural Sound Natural Sound Stereo-Verstrker Natural Sound Integrerad Stereo Frstrkare Amplificatore integrato stereo a Suono Naturale Amplificador integrado estreo de Sonido Natural Natural Sound Gentegreerde Stereo Versterker
OWNERS MANUAL MODE DEMPLOI BEDIENUNGSANLEITUNG BRUKSANVISNING MANUALE DI ISTRUZIONI MANUAL DE INSTRUCCIONES GEBRUIKSAANWIJZING
SUPPLIED ACCESSORIES ACCESSOIRES FOURNIS MITGELIEFERTES ZUBEHOR MEDFOLJANDE TILLBEHOR ACCESSORI IN DOTAZIONE ACCESORIOS INCLUIDOS BIJGELEVERDE ACCESSOIRES

q q q q q q q

After unpacking, check that the following parts are contained. Aprs le dballage, vrifier que les pices suivantes sont incluses. Nach dem Auspacken berprfen, ob die folgenden Teile vorhanden sind. Kontrollera efter det apparaten packats upp att fljande delar finns med. Verificare che tutte le parti seguenti siano contenute nellimballaggio dellapparecchio. Desembale el aparato y verificar que los siguientes accesorios estn en la caja. Controleer na het uitpakken of de volgende onderdelen voorhanden zijn.

q q q q

PHONO POWER
Remote Control Transmitter Emetteur de tlcommande Fernbedienung Fjrrkontrollsndare Telecomando Transmisor del control remoto Afstandbediening

SEARCH

PAUSE/STOP

DISC SKIP

PRESET

A/B/C/D/E

Batteries (size AA, R6, UM-3) Piles (taille AA, R6, UM-3) Batterien (Gre AA, R6, UM-3) Batterier (storlek AA, R6, UM-3) Batterie (dimensioni AA, R6, UM-3) Pilas (tamao AA, R6, UM-3) Batterijen (maat AA, R6, UM-3)

DECK A/B

TAPE 1

TAPE 2

REC/PAUSE

REC MUTE

VOLUME
This product complies with the radio frequency interference requirements of the Council Directive 82/499/EEC and/or 87/308/EEC. Cet appareil est conforme aux prescriptions de la directive communautaire 87/308/CEE. Diese Gerte entsprechen der EG-Richtlinie 82/499/EWG und/oder 87/308/EWG. Dette apparat overholder det gaeldende EF-direktiv vedrrende radiostj. Questo apparecchio conforme al D.M.13 aprile 1989 (Direttiva CEE/87/308) sulla soppressione dei radiodisturbi. Este producto est de acuerdo con los requisitos sobre interferencias de radio frecuencia fijados por el Consejo Directivo 87/308 CEE. Dit product voldoet aan de EEG normen betreffende radio-frekwentie storingen 82/499/EEG en/of 87/308/EEG.
Thank you for selecting this YAMAHA stereo amplifier.

English

FEATURES
q 70W + 70W (8) RMS Output Power, 0.03% THD, 2020,000 Hz q High Dynamic Power, Low Impedance Drive Capability q PURE DIRECT Switch to Reproduce the Purest Source Sound q PRE OUT/MAIN IN Terminals Useful for Connecting An Equalizer, Sound Processor, etc. q Remote Control Capability

CONTENTS

Supplied Accessories...2 Caution...3 Connections..4 Operations...6 Remote Control Transmitter..9 Notes about the Remote Control Transmitter..10 Troubleshooting..11 Specifications...12
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. Install this unit in a cool, dry, clean place away from windows, heat sources, sources of excessive vibration, dust, moisture and cold. Avoid sources of humming (transformers, motors). To prevent fire or electrical shock, do not expose the unit to rain or water. Never open the cabinet. If something drops into the set, contact your dealer. Do not use force on switches, controls or connection wires. When moving the unit, first disconnect the power plug and the wires connected to other equipment. Never pull the wires themselves. The openings on the cabinet assure proper ventilation of the unit. If these openings are obstructed, the temperature inside the cabinet will rise rapidly and eventually damage the circuits. Therefore, avoid placing objects against these openings and do not install the unit where the flow of air through the ventilation openings could be impeded. Always set the VOLUME control to 0 before starting the audio source play: increase the volume gradually to an appropriate level after the play has been started. Do not attempt to clean the unit with chemical solvents; this might damage the finish. Use a clean, dry cloth. Be sure to read the TROUBLESHOOTING section regarding common operating errors before concluding that the unit is faulty. When not planning to use this unit for long periods of time (ie., vacation, etc.), disconnect the AC power plug from the wall outlet. disconnect the antenna cable when there is an electrical storm. IMPORTANT Please record the serial number of this unit in the space below. Serial No.: The serial number is located on the rear of the unit. Retain this Owners Manual in a safe place for future reference. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. CAUTION (FOR CANADA MODEL) TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT AND FULLY INSERT. FOR CANADIAN CUSTOMER THIS DIGITAL APPARATUS DOES NOT EXCEED THE CLASS B LIMITS FOR RADIO NOISE EMISSIONS FROM DIGITAL APPARATUS SET OUT IN THE RADIO INTERFERENCE REGULATION OF THE CANADIAN DEPARTMENT OF COMMUNICATIONS.

3. 4. 5.

6. 7. 8. 9.

For U.K. customers

If the socket outlets in the home are not suitable for the plug supplied with this appliance, it should be cut off and an appropriate 3 pin plug fitted. For details, refer to the instructions described below. Note: The plug severed from the mains lead must be destroyed, as a plug with bared flexible cord is hazardous if engaged in a live socket outlet.
SPECIAL INSTRUCTIONS FOR U.K. MODEL
IMPORTANT: The wire in the mains lead are coloured in accordance with the following code: Blue: NEUTRAL Brown: LIVE The colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug. Proceed as follows: the wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED. Making sure that neither core is connected to the earth terminal of the three pin plug.
10. To prevent lightning damage, disconnect the AC power plug and 11. Grounding or polarization Precautions should be taken so that
the grounding or polarization of an appliance is not defeated.

12. AC outlet

Do not connect audio equipment to the AC outlet on the rear panel if that equipment requires more power than the outlet is rated to provide.
13. Voltage Selector (General Model only)
The voltage selector on the rear panel of this unit must be set for your local main voltage BEFORE plugging into the AC main supply. Voltages are 110/120/220/240V AC, 50/60 Hz.
The apparatus is not disconnected from the AC power source as long as it is connected to the wall outlet, even if the apparatus itself is turned off.

CONNECTIONS

Before attempting to make any connections to or from this unit, be sure to first switch OFF the power to this unit and to any other components to which connections are being made. q When making connections between this unit and other components, be sure all connections are made correctly, that is to say L (left) to L, R (right) to R, + to + and to. Also, refer to the owners manual for each component to be connected to this unit. * For a system connection with YAMAHA CDX-10, TX-10 and KX-10, connections can be made easily by making sure to connect the output (or input) terminals of each component to the same-numbered terminals of this unit.

Speakers A Turntable Compact disc player Video cassette player, LD player, etc. Right Left

LINE OUT

OUTPUT

AUDIO OUT

(Europe model)

SPEAKERS

TAPE PB TAPE 1 REC OUT

AC OUTLETS

SWITCHED l00W MAX. TOTAL

TAPE PB TAPE 2

PRE OUT
A OR B : 6MIN./SPEAKER A + B : l2MIN./SPEAKER

MAIN IN COUPLER

REC OUT

To AC outlet

LINE IN

Tape deck 2

Tape deck 1

Speakers B

: Refer to ABOUT THE ACCESSORY TERMINALS on page 5.

CONNECTING SPEAKERS

Connect the SPEAKERS terminals to your speakers with wire of the proper gauge, cut as short as possible. If the connections are faulty, no sound will be heard from the speakers. Make sure that the polarity of the speaker wires is correct, that is, + and markings are observed. If these wires are reversed, the sound will be unnatural and will lack bass. Do not let the bare speaker wires touch each other and do not let them touch the metal parts of this unit as this could damage this unit and/or speakers. q One or two speaker systems can be connected to this unit. If you connect only one speaker system, connect it to either the SPEAKERS A or B terminals. q Use speakers with the specified impedance shown on the rear of this unit. How to Connect: Red: positive (+) Black: negative ()
Unscrew the knob. Insert the bare wire. 3
[Remove approx. 5mm (1/4) insulation from the speaker wires.] Tighten the knob and secure the wire.
ABOUT THE ACCESSORY TERMINALS

AC OUTLETS (SWITCHED)

Use these to connect the power cords from your components to this unit. The power to the SWITCHED outlets is controlled by this units POWER switch or the provided remote control transmitters POWER key. These outlets will supply power to any component whenever this unit is turned on. The maximum power (total power consumption of components) that can be connected to the SWITCHED AC OUTLETS is 100 watts.
PRE OUT/MAIN IN terminals
Removing the jumper pins enables this unit to independently perform the functions of a control amplifier and a power amplifier. These terminals are for connection of a signalprocessing system such as a graphic equalizer or sound processor. If a sound processor or other external unit is connected between these terminals, the VOLUME control of this unit can be used for overall adjustment of the level of sound. To connect such a unit, remove the jumper pins from the PRE OUT/MAIN IN terminals, connect the inputs of that unit to the PRE OUT terminals and its outputs to the MAIN IN terminals. For details, refer to the owners manual included with the unit to be connected.
GND terminal (For turntable use)
Connecting the ground wire of the turntable to this terminal will normally minimize hum, but in some cases better results may be obtained with the ground wire disconnected.

Notes If you will not use the PRE OUT/MAIN IN terminals, never remove the jumper pins from these terminals. If removed, no sound will be output from this unit. q If you will use this unit with an external unit connected between the PRE OUT and MAIN IN terminals, make sure that the PURE DIRECT switch on the front panel is turned off. q If you will use this unit as a power amplifier, connect the outputs of an external control amplifier etc. to this units MAIN IN terminals. In that case, this units controls will not function except the PHONES jack and the SPEAKERS switches, so use the controls on the external control amplifier to make volume adjustment etc.

OPERATIONS 1, 6

TO PLAY A SOURCE
Select the speakers to be used.

SPEAKERS A B

VOLUME

Set to the 0 position.

* If you use two speaker systems, press both the A and B switches.

Play the source.

Lights up.
Select a desired input source.

TAPE 1 TAPE 2 AUX

INPUT CD

TUNER PHONO 0 l0

Adjust to the desired output level.
If desired, adjust the BASS, TREBLE and BALANCE controls or turn on the PURE DIRECT switch. (Refer to page 8.)

To turn off the power

Press the POWER switch again.
TO RECORD A SOURCE TO TAPE (OR DUB FROM A TAPE TO ANOTHER)
Select the source to be recorded.
Set the tape deck to be used for recording in the recording mode.
CD TAPE 1 TAPE 2 AUX TUNER PHONO
To monitor the sound to be recorded, select the tape deck being used for recording with the INPUT selector.

TAPE 1 TAPE 2

TUNER PHONO
Confirm the source by selecting it with the INPUT selector and turning up the VOLUME control.
Notes q If you want to enjoy another source while recording, select it with the INPUT selector. q VOLUME, BASS, TREBLE, BALANCE controls and PURE DIRECT switch settings have no effect on the material being recorded.
When you listen with headphones
Connect the headphones to the PHONES jack. When listening with headphones privately, set both the SPEAKERS A and B switches to the OFF position.

PHONES

Adjusting the BALANCE control
Adjust the balance of the output volume to the left and right speakers to compensate for sound imbalance caused from speaker location or listening room conditions.
Selecting the SPEAKER system
Because one or two speaker systems can be connected to this unit, the SPEAKERS switches allow you to select speaker system A or B, or both at once.

BALANCE

SPEAKERS A ON B ON
Adjusting the BASS and TREBLE controls
Using the PURE DIRECT switch
You can enjoy the purest possible sound from your audio sources by pressing this switch so that the PURE DIRECT indicator lights up. By doing so, the audio signal bypasses the BASS, TREBLE, BALANCE controls and the PRE OUT/MAIN IN terminals, eliminating any alterations to the audio signal.

TREBLE

PURE DIRECT
: Turn this clockwise to increase (or counterclockwise to decrease) the low frequency response.
TREBLE : Turn this clockwise to increase (or counterclockwise to decrease) the high frequency response.
Open/close the control door
When it is not necessary to operate controls inside the control door, close the door. To close the door To open the door
REMOTE CONTROL TRANSMITTER
The remote control transmitter provided with this unit is designed to control all the most commonly used functions of the unit. If the CD player, tuner and tape deck connected to this unit are YAMAHA components, then this remote control transmitter will also control various functions of each component.
KEY FUNCTIONS For Control of This Unit

Turns the power on/off.

Selects input source.
Turns the volume level up/down.
For Other Component Control
Identify the remote control transmitter keys with your components keys. If these keys are identical, their function will be the same. On each key function, refer to the corresponding instruction on your components manual.
Controls compact disc player. * DISC SKIP is applicable only to compact disc changer. Controls tape deck. * DIR A, B and DECK A/B are applicable only to double cassette tape deck. * For a single cassette deck with automatic reverse function, pressing DIR A will reverse the direction of tape running.
Controls tuner * + : Selects higher preset station number. : Selects lower preset station number. A/B/C/D/E: Selects the page (A E) of preset stations.

Standby mode

While the power is on, pressing the POWER key on the remote control transmitter switches the unit to the Standby mode. (In this mode, the indicator is half illuminated.) Note The POWER switch on the front panel of this unit should be turned off when left unused for a long period of time.

POWER on mode

NOTES ABOUT THE REMOTE CONTROL TRANSMITTER
Battery installation Remote control transmitter operation range

Remote control sensor

Within approximately 6 m (19.7 feet)

Battery replacement

If you find that the remote control transmitter must be used closer to the main unit, the batteries are weak. Replace both batteries with new ones. Notes q Use only AA, R6, UM-3 batteries for replacement. q Be sure the polarities are correct. (See the illustration inside the battery compartment.) q Remove the batteries if the remote control transmitter will not be used for an extended period of time. q If batteries leak, dispose of them immediately. Avoid touching the leaked material or letting it come in contact with clothing, etc. Clean the battery compartment thoroughly before installing new batteries.
Notes q There should be no large obstacles between the remote control transmitter and the main unit. q If the remote control sensor is directly illuminated by strong lighting (especially an inverter type of fluorescent lamp etc.), it might cause the remote control transmitter not to work correctly. In this case, reposition the main unit to avoid direct lighting.

TROUBLESHOOTING

If the unit fails to operate normally, check the following points to determine whether the fault can be corrected by the simple measures suggested. If it cannot be corrected, or if the fault is not listed in the SYMPTOM column, disconnect the power cord and contact your authorized YAMAHA dealer or service center for help.
SYMPTOM The unit fails to turn on when the POWER switch is pressed. No sound. CAUSE Power cord is not plugged in or is not completely inserted. Incorrect output cord connections. Appropriate input source is not selected. Speaker connections are not secure. The sound suddenly goes off. Only one side speaker outputs the sound. The protection circuit has activated because of short circuit etc. Incorrect setting of the BALANCE control. Incorrect cord connections. There is a lack of bass, and no ambience. Sound hums. The + and wires are connected in reverse at the amplifier or speakers. Incorrect cord connections. REMEDY Firmly plug in the power cord. Connect the cords properly. If the problem persists, the cords may be defective. Select an appropriate input source with the INPUT selector. Secure the connections. Turning the unit off and then on will reset the protection circuit. Adjust it to the appropriate position. Connect the cords properly. If the problem persists, the cords may be defective. Connect the speaker wires in the correct phase (+ and ). Firmly connect the audio plugs. If the problem persists, the cords may be defective. Make the GND connection between the turntable and this unit. The PURE DIRECT switch must be switched OFF to use those controls. Change position of the main unit.
No connection from the turntable to the GND terminal. Using the BASS, TREBLE and BALANCE controls does not affect the tone. The remote control transmitter does not work. The distance or range within which the remote control transmitter can be used decreases. The PURE DIRECT switch is ON. Direct sunlight or lighting (of an inverter type of flourescent lamp etc.) is striking the remote control sensor of the main unit. The batteries of this remote control transmitter are too weak.
Replace the batteries with new ones.

SPECIFICATIONS

Minimum RMS Output Power per Channel 8 ohms, 20 Hz to 20 kHz, 0.03% THD.70W+70W 6 ohms, 20 Hz to 20 kHz, 0.06% THD.80W+80W Dynamic Power per Channel (by IHF Dynamic Headroom measuring method) 8/6/4/2 ohms..95/117/140/200W DIN Standard Output Power per Channel (4 ohms, 1 kHz, 0.7% THD) [Europe model only]..100W IEC Power (8 ohms, 1 kHz, 0.03% THD) [Europe model only]..77W Power Band Width 8 ohms, 35W, 0.03% THD.10 Hz to 40 kHz Damping Factor 8 ohms, 20 Hz20 kHz...150 Input Sensitivity/Impedance PHONO MM..2.5 mV/47 k-ohms CD/TUNER/TAPE/AUX..150 mV/47 k-ohms MAIN IN..1.0V/10 k-ohms Maximum Input Signal (1 kHz, 0.005% THD) PHONO MM...120 mV Output Level/Impedance REC OUT...150 mV/2.6 k-ohms PRE OUT..1.0V/1.5 k-ohms Headphone Jack Rated Output/ Impedance Output Level (8 ohms, 1 kHz, 0.03% THD)..0.47V Impedance..390 ohms Frequency Response (20 Hz to 20 kHz) CD/TUNER/TAPE/AUX..00.5 dB MAIN IN...00.5 dB RIAA Equalization Deviation (20 Hz to 20 kHz) PHONO MM...00.5 dB Total Harmonic Distortion (20 Hz to 20 kHz) PHONO MM to REC OUT (3V)..0.005% CD/TUNER/TAPE/AUX to PRE OUT (1V).0.008% CD/TUNER/TAPE/AUX to SP OUT (35W/8 ohms).0.025% Signal-to-Noise Ratio (IHF-A Network) PHONO MM (5 mV Input Shorted).. 88 dB CD (PURE DIRECT: ON).. 110 dB Residual Noise (IHF-A Network) CD (PURE DIRECT: ON).. 50 V Channel Separation (Vol. 30 dB) PHONO MM/MC (Input Shorted 1 kHz/10 kHz)63 dB/52 dB CD/TUNER/TAPE/AUX (Input 5.1 k-ohms Terminated 1 kHz/10 kHz)...65 dB/50 dB Tone Control Characteristics BASS: Boost/cut..10 dB (20 Hz) TREBLE: Boost/cut.10 dB (20 kHz) Gain Tracking Error (0 60dB)..3 dB Power Supply [U.K. model]..AC 240V, 50 Hz [Europe model]..AC 230V, 50 Hz [General model].AC 110/120/220/240V, 50/60 Hz Power Consumption...170W AC Outlets SWITCHED OUTLETS.100W max. total Dimensions (W x H x D).280 x 118.5 x 388.5 mm (11 x 4-11/16 x 15-5/16) Weight..8.2 kg (18 lbs. 1 oz.) Accessories.Remote control transmitter Batteries

Specifications subject to change without notice.
YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA
ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, D-2084 RELLINGEN BEI HAMBURG, F.R. OF GERMANY ELECTRONIQUE FRANCE S.A. 17 RUE DES CAMPANULES, LOGNES 77321 MARNE LA VALLEE CEDEX 2, FRANCE ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, VSTRA FRLUNDA, SWEDEN MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA