Here you can find all about Yamaha CDC-615 like manual and other informations. For example: review.
Yamaha CDC-615 manual (user guide) is ready to download for free.
On the bottom of page users can write a review. If you own a Yamaha CDC-615 please write about it to help other people. [ Report abuse or wrong photo | Share your Yamaha CDC-615 photo ]
Yamaha CDC-615, size: 2.6 MB
User reviews and opinions
|nwcpro||3:35am on Thursday, October 14th, 2010|
|So good I bought two. I have used JVC products for quite a while until I found out there was something better.|
|jamiedolan||7:10pm on Friday, September 17th, 2010|
|russgregory from Bartlett Tn yamaha cdc697BL 5-disc changer meets all my expections, i.e. good quality product, excellent price & shipment by amazon. Total Quality What can I say? This CD changer was a breeze to hook up to my NAD receiver. It sounds great and super easy to use. Great 5 CD basic changer For those who want an inexpensive, basic 5 disc changer this is the one for you.|
|natvlegl||11:10pm on Sunday, August 8th, 2010|
|Had an older Denon 5 disc CD player that was starting to be problematic. Replaced it with this Yamaha and it has been playing flawlssly.|
|thunderoad02||5:01pm on Monday, April 5th, 2010|
|Ordered on Thursday arrived on Tuesday. Set-up a piece of cake. Swapped it for my old unit.|
Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.
Natural Sound Compact Disc Player 5-Disc Carousel Auto-changer PLAYXCHANGE; Disc changing capability while playing another Random Access Programmable Play Random-Sequence Play Single Track/Entire Disc/All Disc Repeat Play Disc Scanning Capability Useful for Disc Searching or Disc Checking Remote Control Capability CD Synchronized Recording with a Compatible YAMAHA Tape Deck
Thank you for selecting this YAMAHA Compact Disc Player.
RISK OF ELECTRIC SHOCK DO NOT OPEN
Safety Instructions.. 2 Connections.. 4 Identification of Components. 5 Loading Discs/Disc Play. 6 Random-Sequence Play. 10 Program Play. 11 Repeat Play.. 13 Index Search. 13 CD Synchronized Recording.14 Notes about the Remote Control Transmitter.. 15 Notes about Handling Compact Discs.. 15 Troubleshooting.. 16 Specifications.. 16
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK), NO USER-SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
IMPORTANT! Please record the serial number of this unit in the space below.
Explanation of Graphical Symbols
Model: Serial No.: The serial number is located on the rear of the unit. Retain this Owners Manual in a safe place for future reference.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
Read Instructions All the safety and operating instructions should be read before the unit is operated. Retain Instructions The safety and operating instructions should be retained for future reference. Heed Warnings All warnings on the unit and in the operating instructions should be adhered to. Follow Instructions All operating and other instructions should be followed. Water and Moisture The unit should not be used near water for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc. Carts and Stands The unit should be used only with a cart or stand that is recommended by the manufacturer. moved with care. Quick stops, excessive force, and uneven surfaces may cause the unit and cart combination to overturn.
11 Power-Cord Protection Power-supply cords should be
routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the unit.
12 Cleaning The unit should be cleaned only as
recommended by the manufacturer.
13 Nonuse Periods The power cord of the unit should be
unplugged from the outlet when left unused for a long period of time.
14 Object and Liquid Entry Care should be taken so that
objects do not fall into and liquids are not spilled into the inside of the unit.
15 Damage Requiring Service The unit should be serviced
by qualified service personnel when:
6A A unit and cart combination should be
A. The power-supply cord or the plug has been
B. Objects have fallen, or liquid has been spilled into the
Wall or Ceiling Mounting The unit should be mounted to a wall or ceiling only as recommended by the manufacturer. Ventilation The unit should be situated so that its location or position does not interfere with its proper ventilation. For example, the unit should not be situated on a bed, sofa, rug, or similar surface, that may block the ventilation openings; or placed in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings. Heat The unit should be situated away from heat sources such as radiators, stoves, or other appliances that produce heat. power supply only of the type described in the operating instructions or as marked on the unit.
C. The unit has been exposed to rain; or D. The unit does not appear to operate normally or
exhibits a marked change in performance; or
E. The unit has been dropped, or the cabinet damaged. 16 Servicing The user should not attempt to service the unit
beyond those means described in the operating instructions. All other servicing should be referred to qualified service personnel.
17 Power Lines An outdoor antenna should be located
away from power lines.
18 Grounding or Polarization Precautions should be taken
so that the grounding or polarization is not defeated.
10 Power Sources The unit should be connected to a
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT
To ensure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. Install your unit in a cool, dry, clean place away from windows, heat sources, and too much vibration, dust, moisture or cold. Avoid sources of hum (transformers, motors). To prevent fire or electrical shock, do not expose to rain and water. Do not operate the unit upside-down. It may overheat, possibly causing damage. Never open the cabinet. If a foreign object drops into the set, contact your dealer. Do not use force on switches, knobs or cords. When moving the set, first turn the unit off. Then gently disconnect the power plug and the cords connecting to other equipment. Never pull the cord itself. Do not attempt to clean the unit with chemical solvents; this might damage the finish. Use a clean, dry cloth.
Be sure to read the TROUBLESHOOTING section on common operating errors before concluding that your unit is faulty. CAUTION FOR CARRYING THIS UNIT Be sure not to carry or tip the unit with discs remaining in it.
CAUTION FOR MOVING THIS UNIT When moving this unit, first remove all discs from the disc tray and close the tray by pressing the OPEN/CLOSE button, and then switch off the power after you confirm that the display has turned as follows.
Never switch off the power if the display does not turn as above, otherwise the unit will get out of order during moving because the internal mechanism is not locked.
CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. As the laser beam used in this compact disc player is harmful to the eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personel only. To avoid electrical shock, do not open the unit. Refer servicing to qualified personnel only. DANGER: The use of optical instrument with this product will increase eye hazard. The apparatus is not disconnected from the AC power source as long as it is connected to the wall outlet, even if the apparatus itself is turned off.
DANGER Invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam.
1. IMPORTANT NOTICE : DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT : When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC authorization to use this product in the USA. 3. NOTE : This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class B digital devices. Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential environment will not result in harmful interference with other electronic devices. This equipment generates/uses radio frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference harmful to the operation of other electronic devices. Compliance with FCC regulations does not guarantee that interference will not occur in all installations. If this product is found to be the source of interference, which can be determined by turning the unit OFF and ON, please try to eliminate the problem by using one of the following measures: Relocate either this product or the device that is being affected by the interference. Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s. In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to coaxial type cable. If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type of product. If you can not locate the appropriate retailer, please contact Yamaha Electronics Corp., U.S.A. 6660 Orangethorpe Ave, Buena Park, CA 90620. The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries.
We Want You Listening For A Lifetime
YAMAHA and the Electronic Industries Associations Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion and, most importantly, without affecting your sensitive hearing. Since hearing damage from loud sounds is often undetectable until it is too late, YAMAHA and the Electronic Industries Associations Consumer Electronics Group recommend you to avoid prolonged exposure from excessive volume levels.
Before making any connections, switch OFF the power to the unit and the amplifier or other component. Connect the LINE OUT terminals to the CD (or AUX) terminals of the amplifier. If the amplifier does not have such terminals, use the TAPE PB terminals. For additional details concerning these connections, refer to the operation instructions for the amplifier being used.
Be sure that the left (L) and right (R) LINE OUT terminals are connected to the corresponding (left and right) terminals of the amplifier or other component. If the placement of this unit causes noise to other equipment, such as a tuner, separate them from each other.
To AC outlet
Connection cord (included) Amplifier
IDENTIFICATION OF COMPONENTS
* ( ) indicates the page number on which the control part is best described.
STOP button (p. 7) POWER switch (p. 6) DISC -select buttons (p. 6) OPEN/CLOSE button (p. 6) PAUSE button (p. 7) PLAYXCHANGE button (p. 6) PLAY button (p. 6) Disc tray (p. 6) SEARCH button (p. 8) SKIP button (p. 7) Disc play MODE select button (p. 6)
DISC SKIP SKIP SEARCH REPEAT RANDOM
OUTPUT LEVEL TIME DIMMER PROG CLEAR MODE
TIME display mode select button (p. 9) DIMMER button (p. 8)
REPEAT button (p. 13) RANDOM button (p. 10)
PROG button (p. 11) Remote control sensor (p. 15) CLEAR button (p. 12) OUTPUT LEVEL control (p. 9) PHONES jack (p. 9)
REMOTE CONTROL TRANSMITTER
The control functions on the main unit and on the remote control transmitter are virtually identical, with the exceptions described below.
DISC SKIP buttons (p. 6)
Numeric buttons (p. 7) DISC SCAN button (p. 8)
DISC SKIP DISC SCAN SKIP PAUSE PLAY
INDEX button (p. 13) OUTPUT LEVEL buttons (p. 9) (+ is identical with UP and with DOWN of the OUTPUT LEVEL control on the main unit.)
SYNCHRO button (p. 14)
OUTPUT LEVEL + SYNCHRO
This manual mainly describes how to operate this unit by using the front panel buttons. To operate this unit on the remote control transmitter, use buttons with the same name as those on the front panel.
LOADING DISCS/DISC PLAY 2, 5 1
Select the disc play mode (DISC MODE: SINGLE or ALL) while watching the display.
Label side upward
Shows the selected disc mode. SINGLE mode: The unit will play a designated disc only. ALL mode: The unit will play all discs in the tray in sequence.
* If necessary, select a desired disc by using a DISC-select button or the DISC SKIP buttons. DISC SKIP
Load the fifth disc.
Notes After closing the disc tray by pressing the OPEN/CLOSE button in the stop mode or after selecting any disc by using the DISC SKIP buttons, the display shows the total number of tracks and the total recorded time of the disc to be played for a few seconds.
During play, you can open the disc tray by pressing the PLAYXCHANGE button without interrupting disc play. However, in this case, pressing the DISC SKIP buttons has no effect. Note You can load or replace discs on the trays when the disc tray is opening, however, never load a disc on the tray hidden inside the unit. In doing so, the disc and the unit may be damaged, because the tray already has a disc, which is being played.
Additionally, you can close the disc tray by pressing the PLAY button, a DISC-select button, a numeric button (on the remote control transmitter) or the RANDOM button, or by pressing the front edge of the disc tray gently. If the tray is closed in these ways, play will begin automatically, however, the display will not show the total number of tracks and the total recorded time of the first disc to be played.
To stop play temporarily
To stop play completely
* To resume play, press the PAUSE button again or the PLAY button.
To play a desired track on the disc
Select a desired track by using the numeric buttons on the remote control transmitter.
To play from the beginning of the track following the one now playing
To play from the beginning of the track now playing
The selected track number is displayed.
To play from the beginning of the track before the one now playing
Example: To select track 25 Press twice, then immediately press once.
* These operations can also be performed when the unit is in the pause or stop mode.
* If a track number higher than the highest track number on the disc is selected, the last track on the disc will be played.
Display information at disc play
Encloses the tray number of the selected disc. Shows the tray numbers with discs. Shows the selected track number. Shows the time displays. (Refer to Selecting time displays on page 9.) Displays the numbers that correspond to the numbers of the tracks (as high as number 15) on the disc. After each track is played, its corresponding number disappears so the number of remaining tracks (and their numbers) can be seen at a glance. Shows the level of signals output into an amplifier or the headphone level adjusted by using the OUTPUT LEVEL control.
To advance or reverse play rapidly (MANUAL SEARCH)
To advance rapidly
(press and hold)
The sound can be heard (although slightly garbled) during manual search in either direction. This is convenient for locating a precise position within a track, or for reviewing the contents quickly. Manual search can also be performed while disc play is paused, though no sound will be heard.
To reverse rapidly
Scanning discs to search for a desired disc (or to check discs on the disc tray)
When the DISC SCAN button is pressed while this unit is stopped, this unit will play an early part of each disc in turn. Each disc is played for 8 seconds. If, during this play, you hear a disc that you want to listen to in entirely, press this button once again, or press the PLAY button on the remote control transmitter. This will cancel this play mode and the unit will enter into the normal play mode. Notes During this play, the disc tray numbers flash on and off on the display. Every time the play of a disc is finished, the corresponding tray number is changed from flashing to lighting. q There may be a case that you can gain no sound with this play, if the disc has a long blank space between tracks, for example. q Durng this play, the setting of the disc play mode (MODE), the program play mode, etc. are canceled temporarily.
Changing brightness of the display
You can select one of the three levels of brightness of the display by pressing the DIMMER button.
Selecting time displays
You can select any of the four time displays by pressing the TIME display mode-select button.
Elapsed time of the track now playing
Total remaining time on the disc
Remaining time of the track now playing
Total disc play time
Note The remaining time 21 or higher.
will not be displayed for track number
When you listen with headphones
Connect the headphones to the PHONES jack and adjust the volume by using the OUTPUT LEVEL control. At that time, note that this adjustment will also vary the level of the signal output to the amplifier.
OUTPUT LEVEL +
You can play the tracks in a random sequence (up to 99 tracks). The unit will automatically mix up tracks from all discs or any desired disc in the disc tray.
3 Select whether to mix up tracks from one disc or all
discs in the tray.
* If the SINGLE disc play mode is selected, next select a desired disc by using the DISC SKIP buttons or a DISCselect button.
To cancel random-sequence play
Press the STOP button or RANDOM button once again, or open the disc tray by pressing the OPEN/CLOSE button.
Notes This feature will not function during programming, or during programmed play. If the POWER is switched off when the random-sequence play mode is functioning, when the POWER is switched on again, the unit will begin the random-sequence play automatically. (This feature is available for timer play.) If the SKIP button is pressed during random-sequence play, the next randomly programmed track will be played. If the SKIP button is pressed, play will return to the beginning of the track now being played. This indication appears while the unit is mixing up tracks. Total remaining time on the disc will not be displayed during random-sequence play.
You can enjoy listening to your favorite tracks selected from one or several discs in any desired order using programmed play. * The use of the remote control transmitter is recommended for easier operations.
Select the desired track.
Stop the unit.
*Repeat step 3 and 4 to set more programs.
If necessary, select the desired disc.
When the programming is completed;
PLAY DISC SKIP
Display information during program play
Shows the program number for the track to be set next. Shows the selected disc and track number. Shows the total time of the tracks currently programmed, if tracks are selected from one disc only. Shows only the numbers of programmed tracks.
* If P-01 does not appear in the display after the PROG button is pressed, press the TIME display mode-select button. * If the total time reaches 100 minutes or more, only the last two-digits will be displayed for the three-digit number.
Notes q You can set as many as 20 programs at one time. q If you choose to perform programming with the DISC 1 tray empty, be sure to press a DISC SKIP button before starting programming. q The total time of the programed tracks will not be displayed, if tracks are selected from more than one disc. q The total time of the programmed tracks will not be displayed, if a track number higher than 20 is programmed. q If, during programming, the TIME display mode-select button is pressed, the program number display can be changed to display the total time of the programmed tracks. To return to the previous display, press the TIME display mode-select button once again.
The SKIP ( and ) button can be used during playing, but only within the range of the programmed tracks. The SEARCH ( and ) button can be used during playing to search through all tracks, including unprogrammed tracks.
To select a track number on the front panel Display a desired track number by pressing either side of the SEARCH button. When the track number appears, press the SKIP button once to input it.
To stop program play
To check programmed data
1. If the unit is in the play mode, press the STOP button. 2. Press the PROG button. 3. Each time the SKIP button is pressed, the track numbers and sequential order of the programmed tracks can be checked one after another. The display of the track number can be returned (sequentially in reverse order) by pressing the SKIP button.
Press the STOP button. The first track number programmed will be displayed. To resume play, press the PLAY button. Play will begin from the beginning of the program.
To cancel a programmed setting
There are several methods, as described below. q Press the CLEAR button while the unit is stopped. q Press the STOP button while the unit is stopped. q Open the disc tray. q Switch off the power.
To correct programmed data
1. Follow the procedure described in To check programmed data. 2. Display the track number to be corrected by pressing the SKIP button. 3. Press a numeric button on the remote control transmitter to select a track to replace the one displayed. The previously programmed track will be cleared from the memory and the new one will be programmed. 4. After the correction has been completed, press the PROG button or PLAY button once again.
You can play any desired track or disc (set of discs) repeatedly by pressing the REPEAT button. The repeat play mode will change whenever you press the REPEAT button.
SINGLE REPEAT (S REP)
A single track is repeatedly played. * This is also available in the programmed-play mode and the random-sequence play mode. (If the repeat play mode is switched off, the programmed-play mode or the randomsequence play mode will be resumed.)
FULL REPEAT (F REP)
In the SINGLE disc play mode: A designated disc is repeatedly played. In the ALL disc play mode: All discs in the disc tray are repeatedly played. * In the programmed-play mode, all programmed tracks are repeatedly played. * In the random-sequence play mode, all randomly sequenced tracks are repeatedly played in the same order.
If the disc includes index numbers, play can be started from any desired index number.
To cancel the index search function
Select a track which has index numbers.
Press the INDEX button. Notes q Not all discs have index numbers. The index system is a method for sub-dividing tracks into smaller divisions (such as, for example, the movements within classical symphonies) for easier location of those parts. The liner notes with the disc usually tell if such index numbers are included. q If an index number is selected that is higher than any index number on that disc, play will start from the last index number point on the disc. q For some discs, play may begin slightly prior to the actual designated index point. q If the disc has no encoded index points, play will begin from the start of the selected track. q The index number can be designated only while 01 is illuminated.
Select the desired index number.
CD SYNCHRONIZED RECORDING
This unit can make a tape decks recording synchronized with CD play automatically. With this function, you can record a CD on tape very easily and more precisely. This recording method needs a YAMAHA tape deck compatible with this function. (Refer to the tape decks operation manual to know whether it is compatible or not.) * This unit and the tape deck must be placed close to each other so that they can receive the signals from this units remote control transmitter at the same time.
Select the disc.
If necessary, select the desired track.
Load a tape on the tape deck. * To record from the beginning of the tape, rewind the tape to the full end of the supply reel.
Both CD play and tape deck recording begin.
* CD play begins a little later than recording
This unit enters into the pause mode, and the tape deck enters into the REC/PAUSE mode. * In this mode, the time display on this unit flashes on and off.
Notes q To finish or stop the recording, make proper operations on the tape deck. q Programmed sequence of tracks can also be recorded with this function, instead of recording an entire disc. (Refer to page 11 for the programming procedure.)
NOTES ABOUT THE REMOTE CONTROL TRANSMITTER
Remote control transmitter operation range
Remote control sensor
Within approximately 7 m (23 feet)
If you find that the remote control transmitter must be used closer to the main unit, the batteries are weak. Replace both batteries with new ones. Notes q Use only AA,R6,UM-3 batteries for replacement. q Be sure the polarities are correct. (See the illustration inside the battery compartment.) q Remove the batteries if the remote control transmitter will not be used for an extended period of time. q If batteries leak, dispose of them immediately. Avoid touching the leaked material or letting it come in contact with clothing, etc. Clean the battery compartment thoroughly before installing new batteries.
Notes q There should be no large obstacles between the remote control transmitter and the main unit. q If the remote control sensor is directly illuminated by strong lighting (especially an inverter type of fluorescent lamp etc.), it might cause the remote control transmitter to not work correctly. In this case, reposition the main unit to avoid direct lightening.
NOTES ABOUT HANDLING COMPACT DISCS
This compact-disc player is designed only for playing of compact discs bearing the mark. Never attempt to load any other type of disc into the unit. The unit will also play 3-inch (8-cm) compact discs. To remove a disc from its storage case, open the case and then press down at the center; with a finger through the center hole and the outer edges held as shown in the illustration, lift the disc out carefully.
Compact discs are not affected by small particles of dust or fingerprints on their playing surface, but even so they should be kept clean. Wipe by using a clean, dry cloth. Do not wipe with a circular motion; wipe straight outward from the center.
,,, , ,
Always handle the disc with care so that its surface is not scratched.
Do not try to clean the discs surface by using any type of disc cleaner, record spray, anti-static spray or liquid, or any other chemical-based liquid, because such substances might irreparably damage the discs surface. Do not expose discs to direct sunlight, high temperature or high humidity for a long period of time, because these might warp or otherwise damage the disc.
Compact discs are not subjected to wear during play, but damage to the disc surface when the disc is being handled can adversely affect the disc's play.
To play a 3-inch (8-cm) CD
Place it in the inner recessed area of the disc tray. Do not put a normal (5-inch/12-cm) CD on top of a 3-inch CD.
If the unit fails to operate normally, check the following points to determine whether the problem can be corrected by the simple measures suggested. If it cannot, or if the problem is not listed in the SYMPTOM column, disconnect the unit's power cord and contact your authorized YAMAHA dealer or service center for assistance.
SYMPTOM The player does not switch ON when the POWER switch is pressed. The disc tray does not close completely. A disc number does not illuminate in the display. PROBABLE CAUSE The power cord is not connected or not completely connected. A foreign object is obstructing the tray. The disc has been loaded upside down. The disc is damaged. There is moisture on the laser pickup. Play does not begin. Play is delayed, or begins at the wrong place. No sound. The disc has been loaded upside down. The disc is dirty. The disc may be scratched or damaged. Improper output cable connections. Improper amplifier operation. Sound skips. The player is being subjected to vibrations or impacts. The disc is dirty. Sound hums. Noise from a nearby tuner. Noise from inside of the disc tray. The remote control transmitter does not work. Improper cable connections. The tuner is too close to the player. The disc may be warped. The batteries of this remote control transmitter are too weak. Direct sunlight or lighting (of an inverter type of fluorescent lamp etc.) is striking the remote control sensor of the main unit. REMEDY Securely connect the power cord. Carefully check the disc tray and remove the foreign object. Load the disc correctly. Check the disc carefully; replace it if necessary. Wait 20 to 30 minutes after switching the unit ON before trying to play a disc. Reload the disc with the label side up. Clean the disc. Check the disc carefully; replace it if necessary. Connect the cables properly. If the problem persists, the cables may be defective. Set the amplifier controls to the correct input selection. Relocate the player. Clean the disc. Securely connect the audio cables. If the problem persists, the cables may be defective. Move the tuner and player farther apart. Replace the disc. Replace the batteries with new ones. Change position of the main unit.
AUDIO SECTION Frequency response. 2 Hz 20 kHz, 0.5 dB De-emphasis equalization.. 0.5 dB Harmonic distortion+noise.. 0.003% (1 kHz) S/N ratio... 110 dB Dynamic range... 98 dB Wow & flutter.. Unmeasurable Output voltage... 20.5V max. Headphones output (20 dB). 20040 mV/150 ohms GENERAL Power requirements U.S.A. and Canada models.. 120V, 60 Hz Australia and U.K. models.. 240V, 50 Hz Europe model..230V, 50 Hz General model. 110/120/220/240V, 50/60 Hz Power consumption.. 20W Dimensions (W x H x D). 435 x 107.5 x 387 mm (17-1/8 x 4-1/4 x 15-1/4) Weight.. 5.9 kg (13 lbs. 0 oz.) Accessories.. Connection cord Remote control transmitter Batteries (size AA, R6,UM-3) Please note that all specifications are subject to change without notice.
YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA
ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, VSTRA FRLUNDA, SWEDEN MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA
EXA915 Desktop PC DVG-G1402S Le32C650l1P Sapt960 DSA8200 MB-3907C TD3KW SE-U55SX Plug-IN Plus LA37S81BX Omnivista 2500 ML-2510-XIP Alcatel Elle 240V Ericsson J132 Server A8-EZ8312 Ericsson W20 TM 808 Fvrt100 NV-GS120 Coolpix 5000 Tascam 322 F1626 FA825E VPL-PX15 Muvo 200 E-copier Review AEG-electrolux Z85 AZ3068-37B TH-S9 21PT4457 HD7810-61 2410-S203 RC6921W FM-8800 DS13204 Storm 9500 CDX-GT130 BA 410 AG-H380 LS-H255 MP-9486SC Magicolor 330 Sport 500 Camaro 1998 Ncch-DLE E-510 RM-VL600T LE40B550 Series Photo R220 Aekqlvg YP-S3AL SP-555 DC310 Nokia 2310 DE4756 1 1 VME110E L173SA Sans FIL Roland SH09 TX-32DK20F KX-FPC166 AQV24nsgn YB-P 2000 S1003J BAR383HGA Neopia MV-1501W WD-52525 LH-T751TB Icarus 1500 Veriton M460 CS-21Z57ML Sl-610 Olympus C-1 42PC7RVH VL-1000 CDX-M600R 40762 13-7500 Motorola C350 Ericsson Yari BT250V CP9810DW ASL64020 Rollei B35 Ideapad Y430 Easy5 B2520 PRO KDL-32U2520 TX-28PS1 3000-514 X-750 RM2330 40-ID SD890 IS
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101