DIC 2589

CLP-240/230

MANUALE DI ISTRUZIONI

Prima di utilizzare il Clavinova, assicuratevi di leggere la sezione "PRECAUZIONI", pagg. 6-7.

IMPORTANTE

Controllate l'alimentazione Assicuratevi che la tensione di alimentazione CA locale corrisponda alla tensione specificata sulla piastrina del nome sul pannello inferiore. In alcuni paesi aree pu essere previsto un selettore di voltaggio posto sul pannello posteriore della tastiera principale vicino al cavo di alimentazione. Assicuratevi che il selettore di voltaggio sia impostato sul voltaggio in uso nel vostro paese. Alla spedizione, il selettore su 240V. Per modificare l'impostazione, usate un cacciavite normale (a intaglio) per ruotare il selettore fino a posizionarlo sulla tensione corretta, visualizzata accanto al puntatore presente sul pannello.
Per informazioni sull'assemblaggio del supporto tastiera, fate riferimento alle istruzioni alla fine del presente manuale.
Clavinova Web site (English only) http://www.yamahaclavinova.com/ Yamaha Manual Library http://www.yamaha.co.jp/manual/english/ U.R.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation 2005 Yamaha Corporation BGA0 ***XX*.*-** Printed in Europe IT

N77008575

SPECIAL MESSAGE SECTION

PRODUCTSAFETYMARKINGS:

Yamaha electronic products may have either labels similar to the graphics shown below or molded/stamped facsimiles of these graphics on the enclosure. The explanation of these graphics appears on this page. Please observe all cautions indicated on this page and those indicated in the safety instruction section.

Battery Notice:

This product MAY contain a small nonrechargable battery which (if applicable) is soldered in place. The average life span of this type of battery is approximately ve years. When replacement becomes necessary, contact a qualied service representative to perform the replacement.
Warning: Do not attempt to recharge, disassemble, or

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
incinerate this type of battery. Keep all batteries away from children. Dispose of used batteries promptly and as regulated by applicable laws. Note: In some areas, the servicer is required by law to return the defective parts. However, you do have the option of having the servicer dispose of these parts for you.

Disposal Notice:

See bottom of Keyboard enclosure for graphic symbol markings.
Should this product become damaged beyond repair, or for some reason its useful life is considered to be at an end, please observe all local, state, and federal regulations that relate to the disposal of products that contain lead, batteries, plastics, etc.
The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. The lightning ash with arrowhead symbol, within the equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufcient magnitude to constitute a risk of electrical shock.
IMPORTANTNOTICE: AllYamaha electronic products are tested and approved by an independent safety testing laboratory in order that you may be sure that when it is properly installed and used in its normal and customary manner, all foreseeable risks have been eliminated. DO NOT modify this unit or commission others to do so unless specically authorized by Yamaha. Product performance and/or safety standards may be diminished. Claims led under the expressed warranty may be denied if the unit is/has been modied. Implied warranties may also be affected. SPECIFICATIONS SUBJECT TO CHANGE:
NOTICE: Service charges incurred due to lack of knowl-
edge relating to how a function or effect works (when the unit is operating as designed) are not covered by the manufacturers warranty, and are therefore the owners responsibility. Please study this manual carefully and consult your dealer before requesting service.

NAME PLATE LOCATION:

The graphic below indicates the location of the name plate. The model number, serial number, power requirements, etc., are located on this plate. You should record the model number, serial number, and the date of purchase in the spaces provided below and retain this manual as a permanent record of your purchase.

Dual Octave Shift Dual Effect Depth Split Point Split Balance Split Octave Shift Split Effect Depth Damper Pedal Range Left Pedal Mode Soft Pedal Effect Depth Sustain Sample Depth Keyoff Sample Volume Song Channel Selection Metronome Volume Song Part Cancel Volume
F8.1 F8.2 F8.3 F8.4 F8.5 F9 F9.5
F7.1 F7.2 F7.3 F7.4 F7.5 F8 F8.5
MIDI Transmit Channel MIDI Receive Channel Local Control Program Change Send & Receive Control Change Send & Receive Backup Character Code 1 ALL ON ON ON
Voice: OFF MIDI Others: ON En

Always backed up

MIDI Data Format
Se avete gi acquisito familiarit con MIDI o utilizzate un computer per controllare il vostro hardware musicale con messaggi MIDI generati dal computer, i dati forniti in questa sezione potranno esservi di aiuto per il controllo del CLP-240/230.

1. NOTE ON/OFF

Data format: [9nH] -> [kk] -> [vv]
9nH = Note ON/OFF event (n = channel number) kk = Note number (Transmit: 09H ~ 78H = A-2 ~ C8 / Receive: 00H ~ 7FH = C-2 ~ G8)* vv = Velocity (Key ON = 01H ~ 7FH, Key OFF = 00H)
(11) RPN ccH Parameter 65H RPN MSB 64H 06H 38H RPN LSB Data Entry MSB Data Entry LSB
Data Range (vvH) Coarse Tune 02H, Fine Tune 01H, Pitch Bend Range 00H
Data format: [8nH] -> [kk] -> [vv] (reception only)
8nH = Note OFF event (n = channel number) kk = Note number: 00H ~ 7FH = C-2 ~ G8 vv = Velocity * If received value exceeds the supported range for the selected voice, the note is adjusted by the necessary number of octaves.

3. MODE MESSAGES

Data format: [BnH] -> [cc] -> [vv]
BnH = Control event (n = channel number) cc = Control number vv = Data Range (1) All Sound Off ccH Parameter Data Range (vvH) 78H All Sound Off 00H Switches off all sound from the channel. Does not reset Note On and Hold On conditions established by Channel Messages. (2) Reset All Controllers ccH Parameter 79H Reset All Controllers Resets controllers as follows. Controller Expression Damper Pedal Sostenuto Soft Pedal Data Range (vvH) 00H Value 127 (max) 0 (off) 0 (off) 0 (off)

2. CONTROL CHANGE

BnH = Control change (n = channel number) cc = Control number vv = Data Range (1) Bank Select ccH Parameter Data Range (vvH) 00H Bank Select MSB 00H: Normal 20H Bank Select LSB 00H.7FH Bank selection processing does not occur until receipt of next Program Change message. (2) Modulation (reception only) ccH Parameter Data Range (vvH) 01H Modulation 00H-7FH (3) Main Volume (reception only) ccH Parameter Data Range (vvH) 07H Volume MSB 00H.7FH (4) Panpot (reception only) ccH Parameter 0AH Panpot (5) Expression ccH Parameter 0BH Expression MSB (6) Damper ccH Parameter 40H Damper MSB (7) Sostenuto ccH Parameter 42H Sostenuto (8) Soft Pedal ccH Parameter 43H Soft Pedal Data Range (vvH) 00H-7FH Data Range (vvH) 00H.7FH Data Range (vvH) 00H.7FH Data Range (vvH) 00H-3FH:off, 40H-7FH:on Data Range (vvH) 00H-3FH:off, 40H-7FH:on

(3) Local Control (reception only) ccH Parameter Data Range (vvH) 7AH Local Control 00H (off), 7FH (on) (4) All Notes Off ccH Parameter Data Range (vvH) 7BH All Notes Off 00H Switches OFF all the notes that are currently ON on the specied channel. Any notes being held by the damper or sostenuto pedal will continue to sound until the pedal is released. (5) Omni Off (reception only) ccH Parameter Data Range (vvH) 7CH Omni Off 00H Same processing as for All Notes Off. (6) Omni On (reception only) ccH Parameter Data Range (vvH) 7DH Omni On 00H Same processing as for All Notes Off. (7) Mono (reception only) ccH Parameter Data Range (vvH) 7EH Mono 00H Same processing as for All Sound Off. (8) Poly (reception only) ccH Parameter Data Range (vvH) 7FH Poly 00H Same processing as for All Sound Off. When control change reception is turned OFF in the Function mode, control change data will not be transmitted or received. Local on/off, OMNI on/off are not transmitted. (The appropriate note off number is supplied with All Note Off transmission).
(9) Effect1 Depth (Reverb Send Level) ccH Parameter Data Range (vvH) 5BH Effect1 Depth 00H.7FH Adjusts the reverb send level. (10) Effect4 Depth (Variation Effect Send Level) ccH Parameter Data Range (vvH) 5EH Effect4 Depth 00H.7FH
When a voice bank MSB/LSB is received, the number is stored in the internal buffer regardless of the received order, then the stored value is used to select the appropriate voice when a program change message is received. The Multi-timbre and Poly modes are always active. No change occurs when OMNI ON, OMNI OFF, MONO, or POLY mode messages are received.
6. SYSTEM EXCLUSIVE MESSAGES (Yamaha MIDI Format)
Panel Data Transmit Data format: [F0H] -> [43H] -> [0nH] -> [7CH] ->. -> [F7H]
F0H, 43H, 0nH, 7CH (n: channel number) 00H, LLH (data length) 43H, 4CH, 20H, 20H (CL) 43H, 4CH, 50H, 27H, 30H, 35H (CLP05) 3xH, 3yH aaH, bbH: Device No. aa=LSB, bb=MSB aa=5EH, bb=16H (CLP-240) aa=5BH, bb=16H (CLP-230) [PANEL DATA] [CHECK SUM (1byte)] = 0-(43H+4CH+20H+.+Data end) F7H

4. PROGRAM CHANGE

Data format: [CnH] -> [ppH]
CnH = Program event (n = channel number) ppH = Program change number P.C.#=Program Change number
CLP-240 GRANDPIANO 1 VARIATION GRANDPIANO 2 VARIATION E.PIANO 1 VARIATION E.PIANO 2 VARIATION HARPSICHORD VARIATION E. CLAVICHORD VARIATION VIBRAPHONE VARIATION CHURCH ORGAN VARIATION JAZZ ORGAN VARIATION STRINGS VARIATION CHOIR VARIATION GUITAR VARIATION WOOD BASS VARIATION E.BASS VARIATION CLP-230 GRANDPIANO 1 GRANDPIANO 2 E.PIANO 1 E.PIANO 2 HARPSICHORD 1 HARPSICHORD 2 VIBRAPHONE CHURCH ORGAN 1 CHURCH ORGAN 2 JAZZ ORGAN STRINGS 1 STRINGS 2 CHOIR GUITAR MSB LSB P.C.# 33 35

Panel Data Contents

(1) 1'st Voice (2) Dual On/Off (3) Dual Voice (4) Dual Balance (5) Dual Detune (6) Dual Voice1 Octave (7) Dual Voice2 Octave (8) Dual Voice1 Effect Depth (9) Dual Voice2 Effect Depth (10) Split On/Off (11) Split Voice (12) Split Point (13) Split Balance (14) Split Voice1 Octave (15) Split Voice2 Octave (16) Split Voice1 Effect Depth (17) Split Voice2 Effect Depth (18) Split Dumper Mode (19) Reverb Type 1 (20) Reverb Type 2 (21) Reverb Depth 1 (22) Reverb Depth 2 (23) Effect Type 1 (24) Effect Type 2 (25) Effect Depth (26) Variation On/Off (27) Touch Sensitivity (28) Fixed Data (29) Left Pedal (30) Soft Pedal Depth (31) Absolute tempo low byte (32) Absolute tempo high byte (33) Key-Off Sampling Depth (34) DDE On/Off (35) DDE Depth (36) Brilliance
Panel data send requests cannot be received.
7. SYSTEM EXCLUSIVE MESSAGES (Universal System Exclusive)
(1) Universal Realtime Message
Data format: [F0H] -> [7FH] -> [XnH] -> [04H] -> [01H] -> [llH] -> [mmH] -> [F7H] MIDI Master Volume
Simultaneously changes the volume of all channels. When a MIDI master volume message is received, the volume only has affect on the MIDI receive channel, not the panel master volume. F0H = Exclusive status 7FH = Universal Realtime 7FH = ID of target device 04H = Sub-ID #1=Device Control Message 01H = Sub-ID #2=Master Volume llH = Volume LSB mmH = Volume MSB F7H = End of Exclusive or F0H = Exclusive status 7FH = Universal Realtime XnH = When n is received n=0~F, whichever is received. X = dont care 04H = Sub-ID #1=Device Control Message 01H = Sub-ID #2=Master Volume llH = Volume LSB mmH = Volume MSB F7H = End of Exclusive
When program change reception is turned OFF in the Function mode, no program change data is transmitted or received. Also, Bank MSB/LSB is not transmitted or received.
5. SYSTEM REALTIME MESSAGES

[rrH] F8H: Timing clock FAH: Start FCH: Stop FEH: Active sensing
Data F8H FAH Transmission Transmitted every 96 clocks Recorder start Reception Received as 96-clock tempo timing when MIDI clock is set to External Recorder start Not received when the MIDI clock is set to Internal. Recorder stop Not received when the MIDI clock is set to Internal. If a signal is not received via MIDI for more than 400 milliseconds, the same processing will take place for All Sound Off, All Notes Off and Reset All Controllers as when those signals are received.

Recorder stop

Transmitted every 200 milliseconds
Caution: If an error occurs during MIDI reception, the Damper, Sostenuto, and Soft effects for all channels are turned off and an All Note Off occurs.
(2) Universal Non-Realtime Message (GM On)
General MIDI Mode On Data format: [F0H] -> [7EH] -> [XnH] -> [09H] -> [01H] -> [F7H]
F0H = Exclusive status 7EH = Universal Non-Realtime 7FH = ID of target device 09H = Sub-ID #1=General MIDI Message 01H = Sub-ID #2=General MIDI On F7H = End of Exclusive or F0H = Exclusive status 7EH = Universal Non-Realtime XnH = When received, n=0~F. X = dont care 09H = Sub-ID #1=General MIDI Message 01H = Sub-ID #2=General MIDI On F7H = End of Exclusive When the General MIDI mode ON message is received, the MIDI system will be reset to its default settings. This message requires approximately 50ms to execute, so sufcient time should be allowed before the next message is sent.
9. SYSTEM EXCLUSIVE MESSAGES (Clavinova MIDI Format)
Data format: [F0H] -> [43H] -> [73H] -> [01H] -> [nnH] -> [F7H]
F0H = 43H = 73H = 01H = nnH = nn 02H 03H F7H = Exclusive status Yamaha ID Clavinova ID Product ID (CLP common) Substatus Control Internal MIDI clock External MIDI clock End of Exclusive
10. SYSTEM EXCLUSIVE MESSAGES (Special Control)
Data format: [F0H] -> [43H] -> [73H] -> [66H] -> [11H] -> [0nH] -> [ccH] -> [vvH] -> [F7H]
F0H = Exclusive status 43H = Yamaha ID 73H = Clavinova ID 7FH = Extended Product ID xxH = Product ID 49H 11H = Special control 0nH = Control MIDI change (n=channel number) cc = Control number vv = Value F7H = End of Exclusive Control 0n ccH vvH 14H: Split Key Number Split Point Always 00H 14H Metronome Always 00H 1BH 00H: No accent 01H-0FH: 1/4-15/4 7FH: off Damper Level ch: 00H-0FH 3DH (Sets the Damper Level for each channel) 00H-7FH Channel Detune ch: 00H-0FH 43H (Sets the Detune value for each channel) 00H-7FH Voice Reserve ch: 00H-0FH 45H 00H : Reserve off 7FH : on* * When Volume, Expression is received for Reserve On, they will be effective from the next Key On. Reserve Off is normal.
8. SYSTEM EXCLUSIVE MESSAGES (XG Standard)

(1) XG Native Parameter Change
Data format: [F0H] -> [43H] -> [1nH] -> [4CH] -> [hhH] -> [mmH] -> [llH] -> [ddH] -> [F7H]
F0H = Exclusive status 43H = YAMAHA ID 1nH = When received, n=0~F. When transmitted, n=0. 4CH = Model ID of XG hhH = Address High mmH = Address Mid llH = Address Low ddH = Data | F7H = End of Exclusive Data size must match parameter size (2 or 4 bytes). When the XG System On message is received, the MIDI system will be reset to its default settings. The message requires approximately 50ms to execute, so sufcient time should be allowed before the next message is sent. (2) XG Native Bulk Data (reception only)
11. SYSTEM EXCLUSIVE MESSAGES (Others)
Data format: [F0H] -> [43H] -> [1nH] -> [27H] -> [30H] -> [00H] -> [00H] -> [mmH] -> [llH] -> [ccH] -> [F7H]
Master Tuning (XG and last message priority) simultaneously changes the pitch of all channels. F0H = Exclusive Status 43H = Yamaha ID 1nH = When received, n=0~F. When transmitted, n=0. 27H = Model ID of TG100 30H = Sub ID 00H = 00H = mmH = Master Tune MSB llH = Master Tune LSB ccH = dont care (under 7FH) F7H = End of Exclusive
Data format: [F0H] -> [43H] -> [0nH] -> [4CH] -> [aaH] -> [bbH] -> [hhH] -> [mmH] -> [llH] ->[ddH] ->.-> [ccH] -> [F7H]
F0H = Exclusive status 43H = YAMAHA ID 0nH = When received, n=0~F. When transmitted, n=0. 4CH = Model ID of XG aaH = ByteCount bbH = ByteCount hhH = Address High mmH = Address Mid llH = Address Low ddH = Data | | | | ccH = Check sum F7H = End of Exclusive Receipt of the XG SYSTEM ON message causes reinitialization of relevant parameters and Control Change values. Allow sufcient time for processing to execute (about 50 msec) before sending the CLP-240/230 another message. XG Native Parameter Change message may contain two or four bytes of parameter data (depending on the parameter size). For information about the Address and Byte Count values, refer to Table 1 below. Note that the tables Total Size value gives the size of a bulk block. Only the top address of the block (00H, 00H, 00H) is valid as a bulk data address.

<Table 1>

MIDI Parameter Change table (SYSTEM) Address (H) Size (H) Data (H) 020C - 05F4* 1 7E 7F TOTAL SIZE - 7F Parameter MASTER TUNE Description -50 - +50[cent] 1st bit 3 - 0 bit 15 - 12 2nd bit 3 - 0 bit 11 - 8 3rd bit 3 - 0 bit 7 - 4 4th bit 3 - 0 bit 3 - - 127 00=XG system ON 00=ON (receive only) Default value (H) 400

MASTER VOLUME XG SYSTEM ON RESET ALL PARAMETERS
*Values lower than 020CH select -50 cents. Values higher than 05F4H select +50 cents.

<Table 2>

MIDI Parameter Change table (EFFECT 1)
Refer to the Effect MIDI Map for a complete list of Reverb, Chorus and Variation type numbers. Address (H) 00 Size (H) 2 Data (H) 00-7F 00-7F Parameter REVERB TYPE MSB REVERB TYPE LSB Description Refer to Effect MIDI Map 00 : basic type Refer to Effect MIDI Map 00 : basic type Default value (H) 01 (=HALL1) 00 00(=Effect off) 00
00-7F VARIATION TYPE MSB 00-7F VARIATION TYPE LSB VARIATION refers to the EFFECT on the panel.

<Table 3>

MIDI Parameter Change table (MULTI PART)
Address (H) Size (H) 08 nn nn = Part Number Data (H) 00 - 7F Parameter DRY LEVEL Description 0 - 127 Default value (H) 7F

Effect MIDI Map

REVERB ROOM HALL 1 HALL 2 STAGE OFF EFFECT CHORUS PHASER TREMOLO ROTARY SP OFF MSB 42H 48H 46H 47H 00H LSB 10H 10H 10H 10H 00H MSB 02H 01H 01H 03H 00H LSB 10H 10H 11H 10H 00H
YAMAHA [ Clavinova ] MIDI Implementation Chart Model CLP-240/230 MIDI Implementation Function. Basic Channel Mode Default Changed Default Messages Altered Transmitted 1 - 16

Chart Recognized

Date :16-DEC-2004 Version : 1.0 Remarks

1 - - 16 3

************** 0 - 127 **************
Note Number : True voice Velocity

0 - - 127

Note ON 9nH,v=1-127 Note OFF 9nH,v=0 Key's Ch's
9nH,v=1-127 9nH,v=0 or 8nH
After Touch Pitch Bend Control Change

*1 *1 *1 *1 *1 *1 *1 *1

0 - 24 semi Bank Select Modulation Main Volume Panpot Expression Data Entry Portamento Control Effect Depth RPN Inc,Dec RPN LSB,MSB
0,11 6,38 64,66,91,94 96-97 100-101

Prog Change

True #

0 - 127 **************

0 - 127

System Exclusive Common

: Song Pos. : Song Sel. : Tune
System : Clock Real Time : Commands Aux : : : Mes- : sages: : All Sound Off Reset All Cntrls Local ON/OFF All Notes OFF Active Sense Reset
(120,126,127) (121) (122) (123-125)
Notes: *1= These Control Change messages cannot be transmitted by panel operations, but can be transmitted by song playback data.
Mode 1 : OMNI ON , POLY Mode 3 : OMNI OFF, POLY
Mode 2 : OMNI ON ,MONO Mode 4 : OMNI OFF,MONO

: Yes : No

Speciche tecniche
CLP-240 Keyboard Sound Source Polyphony (Max.) Voice Selection Effect Volume Controls Recording/Playback Pedal Demo Songs Jacks/Connectors variations for each voice Reverb, Effect, Brilliance, DDE (Dynamic Damper Effect) Master Volume Dual, Split, Metronome, Transpose, Touch (Hard/Medium/Soft/Fixed), Functions, Speaker ON/OFF Dual, Metronome, Transpose, Touch (Hard/Medium/Soft/Fixed), Functions, Speaker ON/OFF GH3 keyboard 88 keys (A-1 C7) AWM Dynamic Stereo Sampling Reverb, Effect, Brilliance AWM Stereo Sampling CLP-230

2-part recording/playback (three user songs), Tempo Adjustment, Sync Start Damper (with half-pedal effect), Sostenuto, Soft 14 voice Demo Songs, 50 preset Songs MIDI (IN/OUT/THRU), PHONES 2, AUX IN (L/L+R, R), AUX OUT (LEVEL FIXED) (L, R), USB TO HOST, USB TO DEVICE Optional USB storage device (via USB TO DEVICE teriminal) Internal Flash Memory 40W 2 16cm 2, 5cm 2 1,411mm 506mm 892mm [55 9/16" 19 15/16" 35 1/8"] (1,411mm 506mm 1,005mm) [55 9/16" 19 15/16" 39 9/16"] 68kg (149lbs., 15oz) 65kg (143lbs., 5oz) Owners Manual, 50 greats for the Piano (Music Book), Accessory CD-ROM for Windows, Accessory CD-ROM for Windows Installation Guide, Bench (included or optional depending on locale) MIDI (IN/OUT/THRU), PHONES 2, AUX IN (L/L+R, R), AUX OUT (LEVEL FIXED) (L, R), USB TO HOST

Memory Device

(for saving User songs): 65 KB (for saving External songs): 307 KB 20W 2 16cm 2
Main Ampliers Speakers Dimensions (W D H) (with music rest) Weight Accessories
Le speciche tecniche e le descrizioni presenti in questo manuale vengono fornite esclusivamente a titolo informativo. Yamaha Corp. si riserva il diritto di cambiare o modicare senza preavviso in qualunque momento i prodotti o le speciche tecniche. Poich le speciche tecniche, le apparecchiature o le opzioni possono non essere le stesse ovunque, vericarle con il rivenditore Yamaha di ducia.
IMPORTANT SAFETY INSTRUCTIONS
INFORMATION RELATING TO PERSONAL INJURY, ELECTRICAL SHOCK, AND FIRE HAZARD POSSIBILITIES HAS BEEN INCLUDED IN THIS LIST.
WARNING- When using any electrical or electronic product,
basic precautions should always be followed. These precautions include, but are not limited to, the following: Read all Safety Instructions, Installation Instructions, Special Message Section items, and any Assembly Instructions found in this manual BEFORE making any connections, including connection to the main supply. Main Power Supply Verication: Yamaha products are manufactured specically for the supply voltage in the area where they are to be sold. If you should move, or if any doubt exists about the supply voltage in your area, please contact your dealer for supply voltage verication and (if applicable) instructions. The required supply voltage is printed on the name plate. For name plate location, please refer to the graphic found in the Special Message Section of this manual. This product may be equipped with a polarized plug (one blade wider than the other). If you are unable to insert the plug into the outlet, turn the plug over and try again. If the problem persists, contact an electrician to have the obsolete outlet replaced. Do NOT defeat the safety purpose of the plug. Some electronic products utilize external power supplies or adapters. Do NOT connect this type of product to any power supply or adapter other than one described in the owners manual, on the name plate, or specically recommended by Yamaha. WARNING: Do not place this product or any other objects on the power cord or place it in a position where anyone could walk on, trip over, or roll anything over power or connecting cords of any kind. The use of an extension cord is not recommended! If you must use an extension cord, the minimum wire size for a 25 cord (or less) is 18 AWG. NOTE: The smaller the AWG number, the larger the current handling capacity. For longer extension cords, consult a local electrician. Ventilation: Electronic products, unless specically designed for enclosed installations, should be placed in locations that do not interfere with proper ventilation. If instructions for enclosed installations are not provided, it must be assumed that unobstructed ventilation is required. Temperature considerations: Electronic products should be installed in locations that do not signicantly contribute to their operating temperature. Placement of this product close to heat sources such as; radiators, heat registers and other devices that produce heat should be avoided. This product was NOT designed for use in wet/damp locations and should not be used near water or exposed to rain. Examples of wet/damp locations are; near a swimming pool, spa, tub, sink, or wet basement. This product should be used only with the components supplied or; a cart, rack, or stand that is recommended by the manufacturer. If a cart, rack, or stand is used, please observe all safety markings and instructions that accompany the accessory product. The power supply cord (plug) should be disconnected from the outlet when electronic products are to be left unused for extended periods of time. Cords should also be disconnected when there is a high probability of lightning and/or electrical storm activity.

11. Care should be taken that objects do not fall and liquids are
not spilled into the enclosure through any openings that may exist. Electrical/electronic products should be serviced by a qualied service person when: a. The power supply cord has been damaged; or b. Objects have fallen, been inserted, or liquids have been spilled into the enclosure through openings; or c. The product has been exposed to rain: or d. The product dose not operate, exhibits a marked change in performance; or e. The product has been dropped, or the enclosure of the product has been damaged.
13. Do not attempt to service this product beyond that
described in the user-maintenance instructions. All other servicing should be referred to qualied service personnel. This product, either alone or in combination with an amplier and headphones or speaker/s, may be capable of producing sound levels that could cause permanent hearing loss. DO NOT operate for a long period of time at a high volume level or at a level that is uncomfortable. If you experience any hearing loss or ringing in the ears, you should consult an audiologist. IMPORTANT: The louder the sound, the shorter the time period before damage occurs. Some Yamaha products may have benches and/or accessory mounting xtures that are either supplied as a part of the product or as optional accessories. Some of these items are designed to be dealer assembled or installed. Please make sure that benches are stable and any optional xtures (where applicable) are well secured BEFORE using. Benches supplied by Yamaha are designed for seating only. No other uses are recommended.

PLEASE KEEP THIS MANUAL

92-469-2

FCC INFORMATION (U.S.A.)

1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC authorization to use this product in the USA. 3. NOTE: This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class B digital devices. Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential environment will not result in harmful interference with other electronic devices. This equipment generates/ uses radio frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference harmful to the operation of other electronic devices. Compliance with FCC regulations does not guarantee that interference will not occur in all installations. If this product is found to be the source of interference, which can be determined by turning the unit OFF and ON, please try to eliminate the problem by using one of the following measures: Relocate either this product or the device that is being affected by the interference. Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line lter/s. In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to co-axial type cable. If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type of product. If you can not locate the appropriate retailer, please contact Yamaha Corporation of America, Electronic Service Division, 6600 Orangethorpe Ave, Buena Park, CA90620 The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries.

(class B)

* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA.
IMPORTANT NOTICE FOR THE UNITED KINGDOM Connecting the Plug and Cord IMPORTANT. The wires in this mains lead are coloured in accordance with the following code: BLUE : NEUTRAL BROWN : LIVE As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured makings identifying the terminals in your plug proceed as follows: The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED. Making sure that neither core is connected to the earth terminal of the three pin plug.
(2 wires) This applies only to products distributed by Yamaha-Kemble Music (U.K.) Ltd.
COMPLIANCE INFORMATION STATEMENT (DECLARATION OF CONFORMITY PROCEDURE)
Responsible Party : Yamaha Corporation of America Address : 6600 Orangethorpe Ave., Buena Park, Calif. 90620 Telephone : 714-522-9011 Type of Equipment : Electronic Piano Model Name : CLP-240/230 This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received including interference that may cause undesired operation. See user manual instructions if interference to radio reception is suspected.
* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. (FCC DoC)
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH
WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
ATTENTION: POUR VITER LES CHOCS LECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQUAU FOND.
(polarity) This applies only to products distributed by Yamaha Canada Music Ltd. Ceci ne sapplique quaux produits distribus par Yamaha Canada Musique Lte.
For details of products, please contact your nearest Yamaha representative or the authorized distributor listed below. Per ulteriori dettagli sui prodotti, rivolgersi al pi vicino rappresentante Yamaha oppure a uno dei distributori autorizzati elencati di seguito.

NORTH AMERICA

CANADA
Yamaha Canada Music Ltd. 135 Milner Avenue, Scarborough, Ontario, M1S 3R1, Canada Tel: 416-298-1311

BELGIUM/LUXEMBOURG

Yamaha Music Central Europe GmbH, Branch Belgium Rue de Geneve (Genevastraat) 10, 1140 - Brussels, Belgium Tel: 02-726 6032
THE PEOPLES REPUBLIC OF CHINA
Yamaha Music & Electronics (China) Co.,Ltd. 25/F., United Plaza, 1468 Nanjing Road (West), Jingan, Shanghai, China Tel: 021-6247-2211

U.S.A.

Yamaha Corporation of America 6600 Orangethorpe Ave., Buena Park, Calif. 90620, U.S.A. Tel: 714-522-9011

FRANCE

Yamaha Musique France BP 70-77312 Marne-la-Valle Cedex 2, France Tel: 01-64-61-4000

HONG KONG

Tom Lee Music Co., Ltd. 11/F., Silvercord Tower 1, 30 Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: 2737-7688
Yamaha Musica Italia S.P.A. Viale Italia 88, 20020 Lainate (Milano), Italy Tel: 02-935-771

INDONESIA

PT. Yamaha Music Indonesia (Distributor) PT. Nusantik Gedung Yamaha Music Center, Jalan Jend. Gatot Subroto Kav. 4, Jakarta 12930, Indonesia Tel: 21-520-2577
CENTRAL & SOUTH AMERICA

MEXICO

Yamaha de Mxico S.A. de C.V. Calz. Javier Rojo Gmez #1149, Col. Guadalupe del Moral C.P. 09300, Mxico, D.F., Mxico Tel: 55-5804-0600

SPAIN/PORTUGAL

Yamaha-Hazen Msica, S.A. Ctra. de la Coruna km. 17, 200, 28230 Las Rozas (Madrid), Spain Tel: 91-639-8888
Yamaha Music Korea Ltd. Tong-Yang Securities Bldg. 16F 23-8 Yoido-dong, Youngdungpo-ku, Seoul, Korea Tel: 02-3770-0660

BRAZIL

Yamaha Musical do Brasil Ltda. Av. Reboucas 2636-Pinheiros CEP: 05402-400 Sao Paulo-SP. Brasil Tel: 011-3085-1377

GREECE

Philippos Nakas S.A. The Music House 147 Skiathou Street, 112-55 Athens, Greece Tel: 01-228 2160

MALAYSIA

Yamaha Music Malaysia, Sdn., Bhd. Lot 8, Jalan Perbandaran, 47301 Kelana Jaya, Petaling Jaya, Selangor, Malaysia Tel: 3-78030900

SWEDEN

Yamaha Scandinavia AB J. A. Wettergrens Gata 1 Box 30053 S-Gteborg, Sweden Tel: 34 00

ARGENTINA

Yamaha Music Latin America, S.A. Sucursal de Argentina Viamonte 1145 Piso2-B 1053, Buenos Aires, Argentina Tel: 1-4371-7021

PHILIPPINES

Yupangco Music Corporation 339 Gil J. Puyat Avenue, P.O. Box 885 MCPO, Makati, Metro Manila, Philippines Tel: 819-7551

DENMARK

YS Copenhagen Liaison Ofce Generatorvej 6A DK-2730 Herlev, Denmark Tel: 49 00
PANAMA AND OTHER LATIN AMERICAN COUNTRIES/ CARIBBEAN COUNTRIES
Yamaha Music Latin America, S.A. Torre Banco General, Piso 7, Urbanizacin Marbella, Calle 47 y Aquilino de la Guardia, Ciudad de Panam, Panam Tel: +507-269-5311

SINGAPORE

Yamaha Music Asia Pte., Ltd. #03-11 A-Z Building 140 Paya Lebor Road, Singapore 409015 Tel: 747-4374

FINLAND

F-Musiikki Oy Kluuvikatu 6, P.O. Box 260, SF-00101 Helsinki, Finland Tel: 09 618511

TAIWAN

Yamaha KHS Music Co., Ltd. 3F, #6, Sec.2, Nan Jing E. Rd. Taipei. Taiwan 104, R.O.C. Tel: 02-2511-8688

EUROPE

THE UNITED KINGDOM
Yamaha-Kemble Music (U.K.) Ltd. Sherbourne Drive, Tilbrook, Milton Keynes, MK7 8BL, England Tel: 01908-366700

NORWAY

Norsk lial av Yamaha Scandinavia AB Grini Nringspark 1 N-1345 sters, Norway Tel: 77 70

THAILAND

Siam Music Yamaha Co., Ltd. 891/1 Siam Motors Building, 15-16 oor Rama 1 road, Wangmai, Pathumwan Bangkok 10330, Thailand Tel: 02-215-2626

ICELAND

Skifan HF Skeifan 17 P.O. Box 8120 IS-128 Reykjavik, Iceland Tel: 525 5000

IRELAND

Danfay Ltd. 61D, Sallynoggin Road, Dun Laoghaire, Co. Dublin Tel: 01-2859177

OTHER ASIAN COUNTRIES

Yamaha Corporation, Asia-Pacic Music Marketing Group Nakazawa-cho 10-1, Hamamatsu, Japan 430-8650 Tel: +81-53-460-2317

GERMANY

Yamaha Music Central Europe GmbH Siemensstrae 22-34, 25462 Rellingen, Germany Tel: 04101-3030

OTHER EUROPEAN COUNTRIES

Yamaha Music Central Europe GmbH Siemensstrae 22-34, 25462 Rellingen, Germany Tel: +49-4101-3030
SWITZERLAND/LIECHTENSTEIN
Yamaha Music Central Europe GmbH, Branch Switzerland Seefeldstrasse 94, 8008 Zrich, Switzerland Tel: 01-383 3990

AFRICA

Yamaha Corporation, Asia-Pacic Music Marketing Group Nakazawa-cho 10-1, Hamamatsu, Japan 430-8650 Tel: +81-53-460-2312

OCEANIA

AUSTRALIA
Yamaha Music Australia Pty. Ltd. Level 1, 99 Queensbridge Street, Southbank, Victoria 3006, Australia Tel: 3-9693-5111

AUSTRIA

Yamaha Music Central Europe GmbH, Branch Austria Schleiergasse 20, A-1100 Wien, Austria Tel: 01-60203900

MIDDLE EAST