Reviews & Opinions
Independent and trusted. Read before buy Yamaha CLP-930!

Yamaha CLP-930


Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Yamaha CLP-930, size: 1.5 MB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.


Yamaha CLP-930About Yamaha CLP-930
Here you can find all about Yamaha CLP-930 like manual and other informations. For example: review.

Yamaha CLP-930 manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Yamaha CLP-930 please write about it to help other people.


[ Report abuse or wrong photo | Share your Yamaha CLP-930 photo ]

Video review

Watermark Enya cover


User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 7. Page 1 of 1. Average Rating:
trunger 9:12am on Thursday, October 28th, 2010 
Problems with assembly The monitor is fine once you are able to attach the base to the monitor.
wagb4 10:54pm on Friday, August 27th, 2010 
Easy to install. No problems at all, so far. I like it though next time I will get an energy save product. Easy Setup,Sharp Image,Vivid Colors I use this connected to an ASUS EEE netbook with great results in a non-profit that I work with. excellent product Easy Setup,Sharp Image,Vivid Colors reliable product Easy Setup,Lightweight,Sharp Image,Vivid Colors
Nelly 2:58pm on Friday, August 6th, 2010 
Not Sure what to do When i first opened the box the product looked amazing and i have to say i was very pleased with the purchase.
highlife 5:53pm on Tuesday, July 27th, 2010 
Samsung SM2033SN Monitor Excellent product. Build and picture quality are second to none. I love this PC monitor! I bought this monitor to replace my very old box monitor (circa 1975) I must say I am very, very impressed!
clyman 9:17pm on Saturday, June 26th, 2010 
A newer version! After reading dozens of reviews on this site and others, as well as viewing the monitor in person in 3 different stores. Its ok with the price i bought it for Bought a used one and i pretty much what i got what i pay for. Decent monitor though... Monitor DIsplay is small even on fullscreen mode I pruchased my samsung lcd monitor last week Dec. 28, 2009 and if I browse any website.
draude 7:35am on Thursday, May 27th, 2010 
Purchased for a customer build, so not a lot to say pro or con. Very bright, clear image rendition For wall (VESA) mounting. samsung has done everything they can to get us new monitors but for future reference this line has had some bad monitors. Bright Crisp Display. I would highly recommend. Would definitely buy another, but with a higher resolution the next time I need a monitor. I love this product.
curiosity_kills 5:49pm on Thursday, April 15th, 2010 
Fantastic monitor for the price I bought this monitor to use with my Samsung NC20 and I have to say that I am mightily impressed.

Comments posted on are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.





* Please keep these precautions in a safe place for future reference.


Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following:
Do not open the instrument or attempt to disassemble the internal parts or modify them in any way. The instrument contains no user-serviceable parts. If it should appear to be malfunctioning, discontinue use immediately and have it inspected by qualified Yamaha service personnel. Do not expose the instrument to rain, use it near water or in damp or wet conditions, or place containers on it containing liquids which might spill into any openings. If the power cord or plug becomes frayed or damaged, or if there is a sudden loss of sound during use of the instrument, or if any unusual smells or smoke should appear to be caused by it, immediately turn off the power switch, disconnect the electric plug from the outlet, and have the instrument inspected by qualified Yamaha service personnel. Only use the voltage specified as correct for the instrument. The required voltage is printed on the name plate of the instrument. Before cleaning the instrument, always remove the electric plug from the outlet. Never insert or remove an electric plug with wet hands. Check the electric plug periodically and remove any dirt or dust which may have accumulated on it.
Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the instrument or other property. These precautions include, but are not limited to, the following:
Do not place the power cord near heat sources such as heaters or radiators, and do not excessively bend or otherwise damage the cord, place heavy objects on it, or place it in a position where anyone could walk on, trip over, or roll anything over it. When removing the electric plug from the instrument or an outlet, always hold the plug itself and not the cord. Pulling by the cord can damage it. Do not connect the instrument to an electrical outlet using a multiple-connector. Doing so can result in lower sound quality, or possibly cause overheating in the outlet. Remove the electric plug from the outlet when the instrument is not to be used for extended periods of time, or during electrical storms. Before connecting the instrument to other electronic components, turn off the power for all components. Before turning the power on or off for all components, set all volume levels to minimum. Also, be sure to set the volumes of all components at their minimum levels and gradually raise the volume controls while playing the instrument to set the desired listening level. Do not expose the instrument to excessive dust or vibrations, or extreme cold or heat (such as in direct sunlight, near a heater, or in a car during the day) to prevent the possibility of panel disfiguration or damage to the internal components. Do not use the instrument near other electrical products such as televisions, radios, or speakers, since this might cause interference which can affect proper operation of the other products. Do not place the instrument in an unstable position where it might accidentally fall over. Before moving the instrument, remove all connected cables. When cleaning the instrument, use a soft, dry or slightly damp cloth. Do not use paint thinners, solvents, cleaning fluids, or chemical-impregnated wiping cloths. Also, do not place vinyl, plastic or rubber objects on the instrument, since this might discolor the panel or keyboard. Do not rest your weight on, or place heavy objects on the instrument, and do not use excessive force on the buttons, switches or connectors. Take care that the key cover does not pinch your fingers, and do not insert a finger or hand in the key cover gap. Never insert or drop paper or metallic or other objects between the slits of the key cover and the keyboard. If this happens, immediately turn off the power and remove the electric plug from the outlet and have the instrument inspected by qualified Yamaha service personnel. Do not place the instrument against a wall (allow at least 3 cm/one-inch from the wall), since this can cause inadequate air circulation, and possibly result in the instrument overheating. Read carefully the attached documentation explaining the assembly process. Failure to assemble the instrument in the proper sequence might result in damage to the instrument or even injury. Do not operate the instrument for a long period of time at a high or uncomfortable volume level, since this can cause permanent hearing loss. If you experience any hearing loss or ringing in the ears, consult a physician.

IUSING THE BENCH (if included)
Do not play carelessly with or stand on the bench. Using it as a tool or stepladder or for any other purpose might result in accident or injury. Only one person should sit on the bench at a time, in order to prevent the possibility of accident or injury. If the bench screws become loose due to extensive long-term use, tighten them periodically using the included tool.


Save all data to an external device such as the Yamaha MIDI Data Filer MDF3, in order to help prevent the loss of important data due to a malfunction or user operating error.
Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed.
Always turn the power off when the instrument is not in use.




Thank you for choosing a Yamaha Clavinova. Your Clavinova is a fine musical instrument that employs advanced Yamaha music technology. With the proper care, your Clavinova will give you many years of musical pleasure.
G The Clavinova CLP-950/930 digital piano offers unmatched sonic realism and natural grand-piano type playability with Yamahas original AWM Dynamic Stereo Sampling tone generation technology on the CLP-950 and AWM Stereo Sampling on the CLP-930 for rich, musical voices, and a special Graded Hammer keyboard which provides graded key weight and response throughout the keyboard range. The grand piano voices feature totally new samples painstakingly recorded from a full concert grand piano. The CLP-950 GRAND PIANO 1 voice features multiple velocity-switched samples (Dynamic Sampling), a Soundboard Reverb effect which accurately simulates the resonance of a piano soundboard, special Sustain Samples which recreate the unique resonance of an acoustic grand pianos soundboard and strings when the damper pedal is pressed, and Key-off Samples that add the subtle sound produced when the keys are released. G Dual mode allows 2 voices to be played simultaneously. G Split mode (CLP-950) allows different voices to be played by the left and right hands. G Metronome feature with variable tempo facilitates practice. G 2-track digital recorder lets you record and play back anything you play on the keyboard. G MIDI compatibility and a range of MIDI functions make the Clavinova useful in a range of advanced MIDI music systems. G Built-in computer interface for direct connection to personal computers running advanced music software. The music stand can be removed to allow placement of a laptop-type personal computer or other equipment on top of the instrument.













A-1 B-1 C0 D0 E0 F0 G0 A0 B0 C1 D1 E1 F1 G1 A1 B1 C2 D2 E2 F2 G2 A2 B2 C3 D3 E3 F3 G3 A3 B3 C4 D4 E4 F4 G4 A4 B4 C5 D5 E5 F5 G5 A5 B5 C6 D6 E6 F6 G6 A6 B6 C7
Tuning keys (See page 22) PHONES jacks on bottom panel (see page 10)
1 [POWER] Switch Press the [POWER] switch once to turn the power ON, a second time to turn the power OFF. When the power is initially turned ON, a voice selector LED will light, and the power indicator located below the left end of the keyboard will light. 2 [MASTER VOLUME] Control The [MASTER VOLUME] control adjusts the volume (level) of sound produced by the Clavinovas internal stereo sound system. The [MASTER VOLUME] control also adjusts headphone volume when a pair of headphones is plugged into the PHONES jack (page 10). 3 [BRILLIANCE] Control (CLP-950) The [BRILLIANCE] Control adjusts the tonality or timbre of the output sound from a mellow tone to a bright tone. 4 [DEMO] Button Activates the demo playback mode in which you can select playback of different demonstration
sequences for each of the Clavinovas voices. See page 12 for details. 5 [TRANSPOSE] Button The [TRANSPOSE] button allows access to the Clavinovas TRANSPOSE function (to shift the pitch of the entire keyboard up or down in semitone intervals). 6 [FUNCTION] Button This button accesses a range of utility functions including the MIDI functions that significantly enhance versatility and playability. See page 27 for details. 7 METRONOME [START/STOP] Button Turns the metronome sound on and off. The [TEMPO/FUNCTION M, L] buttons are used to set the tempo of the metronome sound. The [/NO] and [+/YES] buttons are used to change the time signature (beat) of the metronome if used while the METRONOME [START/STOP] button is held page 23.

Soft pedal

Damper pedal

Sostenuto pedal

8 [TEMPO/FUNCTION M, L] Buttons These buttons adjust the tempo of the metronome function as well as the playback tempo of the recorder function. The tempo range is from 32 to 280 beats per minute page 23. These same buttons are also used to select functions page 27. 9 [/NO], [+/YES] Buttons These buttons select a preset song number for playback, and are also used to adjust a range of other parameters. 0 [PRESET SONG] Button This button enters the preset song mode. While in this mode you can use the [/NO] and [+/YES] buttons to select from 50 songs. ! TRACK [1] and [2] Buttons The Clavinova has a 2-track recorder, and these buttons are used to select the track(s) to be recorded or played back. See page 24 for details. @ SONG [START/STOP] and [REC] Buttons These buttons control the Clavinovas user song recorder, letting you record and play back just about anything you play on the keyboard. # Voice Selectors Simply press any of the voice selectors to select the corresponding voice. The voice selector LED will light to indicate which voice is currently selected.


2 AUX IN L/L+R and R Jacks These jacks are intended for use with an external tone generator module such as the Yamaha DOU-10 Disk Orchestra Unit. The stereo outputs from the external tone generator module are connected to the AUX IN L/L+R and R jacks, allowing the sound of the tone generator to be reproduced via the Clavinovas internal sound system and speakers. A line-level mono source can be connected to the L/L+R jack.
When the Clavinovas AUX IN jacks are connected to an external source, first turn the power to the external device on, and then the power to the Clavinova. Reverse this order when turning the power off. The input signal from the AUX IN jacks is controlled by the Clavinovas volume and brilliance (CLP-950) controls. Reverb and effect functions will have no affect. The input signal from the AUX IN jacks is delivered to the AUX OUT jacks.

Personal Computer

3 TO HOST Connector & HOST SELECT Switch This jack and selector switch allow direct connection to a personal computer for sequencing and other music applications without the need for a separate MIDI interface. See page 37 for details.

Mac PC-1

Tone Generator
4 MIDI IN, THRU and OUT Connectors The MIDI IN connector receives MIDI data from an external MIDI device (such as the DOU-10 Disk Orchestra Unit) which can be used to control the Clavinova. The MIDI THRU connector retransmits any data received at the MIDI IN connector, allowing chaining of several MIDI instruments or other devices. The MIDI OUT connector transmits MIDI data generated by the Clavinova (e.g. note and velocity data produced by playing the Clavinova keyboard). More details on MIDI are given in MIDI Functions on page 33. 5 PEDAL Jack (CLP-930) This terminal is for connecting the pedal cord from the pedal box (refer to the Keyboard Stand Assembly on pages 55-59).
G PHONES Jacks (Bottom Panel) Two sets of standard stereo headphones can be plugged in here for private practice or late-night playing. The internal speaker system is automatically shut off when a pair of headphones is plugged into either of the PHONES jacks.

Some voices do not have keyboard touch response. See Voice Descriptions on page 41 for details.
Add Effects As Required...
You can add or change reverb, effects and brilliance (CLP-950) as desired by using the [REVERB] button (page 18), [EFFECT] button (page 19) and the [BRILLIANCE] control (page 19).


Playing the Demonstration Tunes
Demonstration tunes are provided that effectively demonstrate each of the Clavinovas voices. There are also 50 preset songs that you can play individually, all in sequence, or in random order. The 50 greats for the Clavinova score collection provided with the Clavinova includes the written scores for all 50 preset songs. Heres how you can select and play the demo tunes.
The demo or preset song mode cannot be engaged while a user song recorder (page 24) is in use. No MIDI reception occurs in the demo/preset song mode. The demo/preset song data is not transmitted via the MIDI connectors.
* See page 42 for a complete listing of the demo tunes.

Voice Demo

Engage the Demo Mode...
Press the [DEMO] button to engage the demo mode the voice selector indicators will flash in sequence.

Play a Voice Demo....

Press one of the voice selectors to start playback of all songs starting from the corresponding voice demo tune featuring the voice normally selected by that voice selector button. (If you press the SONG [START/STOP] button instead of a voice selector button, the GRAND PIANO 1 (GRAND PIANO: CLP-930) demo tune will begin playback.) The indicator of the selected voice selector button will flash during playback, and - - - will appear on the LED display. You can start playback of any other voice demo tune during playback by simply pressing the corresponding voice selector. You can stop playback at any time by pressing the SONG [START/STOP] button or the voice selector of the currently playing demo.
Use the [MASTER VOLUME] control to adjust the volume and the [BRILLIANCE] control (CLP-950) to adjust the brilliance (page 19).
Exit From the Demo Mode...
Press the [DEMO] button to exit from the demo mode and return to the normal play mode.

Preset Song

Engage the Preset Song Mode..
Press the [PRESET SONG] button to engage the preset song mode the [PRESET SONG], TRACK [1] and [2] indicators will light.

Play a Preset Song....

To play any of the 50 preset songs provided, use the [/NO], [+/YES] buttons to select the number of the tune you want to play (the number will appear on the LED display), then press the SONG [START/STOP] button. Playback will stop automatically when playback of the selected preset song has finished. Select ALL instead of a number to play all preset songs in sequence, or select rnd to continuously play all preset songs in random order. Press the SONG [START/STOP] button to stop playback.

Use the [MASTER VOLUME] control to adjust the volume. You can use the [TEMPO/FUNCTION M,L] buttons to adjust the playback tempo as required. This produces a relative tempo variation, with a range from -50 through - - - to 50 at maximum; the range will differ depending on the selected song. The default tempo - - - is automatically selected whenever a new preset song is selected, or playback of a new preset song begins during ALL or rnd playback. You can play the keyboard along with the preset song playback. The voice playing on the keyboard can be changed. You can change the Brilliance control (CLP-950) and Reverb type that is applied to the voice you play on the keyboard and for the preset song playback. You can change the Effect type and Touch sensitivity that is applied to the voice you play on the keyboard. When a new preset song is selected or a new preset song is automatically started in continuous play, the HALL 1 reverb type will automatically be selected.
Exit From the Preset Song Mode..
Press the [PRESET SONG] button to exit from the preset song mode, the indicator will go off, and return to the normal play mode.

Preset Song A-B Repeat

The A-B Repeat function can be used to continuously repeat a specified phrase within a preset song. Combined with the Part Cancel function described below, this provides an excellent way to practice difficult phrases.
Specify the Beginning (A) of the Phrase..


Select and play a preset song, then press the [FUNCTION] button at the beginning of the phrase you want to repeat. This sets the A point (A- will appear on the display). To set the A point at the very beginning of the song, press the [FUNCTION] button before starting playback.
Specify the End (B) of the Phrase..
Press the [FUNCTION] button a second time at the end of the phrase. This sets the B point (A-b will appear on the display). At this point repeat playback will begin between the specified A and B points. The metronome will sound when playback begins to give you a tempo reference. However, if playback repeats from the beginning of the song, there will be no tempo reference from metronome. To set the B point at the songs end, press the [FUNCTION] button after song playback is complete and before A- disappears from the display.

The effect depth settings cannot be changed unless the EFFECT is ON. The Function mode must be exited before EFFECT can be turned ON.

F3.7: Reset......

This function resets all dual-mode functions to their default values. Press the [+/YES] button to reset the values. End will appear on the display when all functions have been reset.
F4 CLP-950 Split Mode Functions
After selecting F4.Y, press the [+/YES] button to engage the split-mode function submode, then use the [TEMPO/FUNCTION t, s] buttons to select the desired split mode function, as listed below. If the Split mode is not engaged F4.- will appear instead of F4.Y and the Split mode functions cannot be selected. Also note that you must exit from the Function mode before the Split mode can be engaged.
I SHORTCUT: You can jump directly to the split-mode functions (F4) by pressing the [FUNCTION] button while holding the [SPLIT] button.
Split mode function settings are set individually for each voice combination.

F4.1: Split Point.....

In addition to the split point setting method described on page 17, the split point can be set via this function. Use the [/NO] and [+/YES] buttons to set the split point as required, or simply press the appropriate key on the keyboard: from A-1 to C7. Press the [/NO] and [+/YES] buttons simultaneously to recall the default setting F#2.

F4.2: Split Balance.....

The volume levels of the two voices combined in the split mode can be adjusted as required by using this function. Use the [/NO] and [+/YES] buttons to adjust the balance as required. The balance range is from 0 through 20. A setting of 10 produces equal balance between the two split-mode voices. Settings below 10 increase the volume of the Left Voice in relation to the Right Voice, and settings above 10 increase the volume of the Right Voice in relation to the Left Voice. Press the [/NO] and [+/YES] buttons simultaneously to recall the default setting (different for each voice combination).
F4.3: Right Voice Octave Shift... F4.4: Left Voice Octave Shift....
Depending on which voices you combine using the split mode, the combination may sound better if one of the voices is shifted up or down an octave. Use the [/NO] and [+/YES] buttons to set the octave of the Left or Right Voice as required. The available settings are 0 for normal pitch, 1 to shift the pitch down one octave, and 1 to shift the pitch up one octave. Press the [/NO] and [+/YES] buttons simultaneously to recall the default setting (different for each voice combination). Set according to the pitch extent for the song you want to play.

1: Soft 2: Start/Stop The left pedal functions as the soft pedal. The left pedal functions in the same manner as the SONG [START/STOP] button.
F5.2: Sustain Sample Depth...
The CLP-950 GRAND PIANO 1 voice features special Sustain Samples which recreate the unique resonance of an acoustic grand pianos soundboard and strings when the damper pedal is pressed. This function lets you adjust the depth of this effect. Use the [/NO] and [+/YES] buttons to set the effect depth as required. The effect depth range is from 0 through 20. A setting of 0 produces no effect, while a setting of 20 produces maximum effect depth. Press the [/ NO] and [+/YES] buttons simultaneously to recall the default setting 12.
F5 CLP-930 Metronome Volume F6 CLP-950 Metronome Volume
I SHORTCUT: You can jump directly to the metronome functions by pressing the [FUNCTION] button while holding the METRONOME [START/STOP] button.
The volume of the metronome sound can be changed. After selecting F5 or F6, use the [/NO] and [+/YES] buttons to set the metronome volume as required. The volume range is from 1 through 20. A setting of 1 produces minimum sound, while a setting of 20 produces maximum metronome volume. Press the [/NO] and [+/YES] buttons simultaneously to recall the default setting 10.
F6 CLP-930 Preset Song Part Cancel Volume F7 CLP-950 Preset Song Part Cancel Volume
This function sets the volume at which a canceled part is played during preset song playback (see page 15 for information on the part-cancel function). Use the [/NO] and [+/ YES] buttons to set the volume as required. The volume range is from 0 through 20. A setting of 0 produces no sound, while a setting of 20 produces maximum volume. Press the [/ NO] and [+/YES] buttons simultaneously to recall the default setting 5. Adjust the part volume to a comfortable level to use the canceled part as a guide to play along with. Set to 0 if you dont want to hear the part.
F7 CLP-930 MIDI Functions F8 CLP-950 MIDI Functions
G A Brief Introduction to MIDI
MIDI, the Musical Instrument Digital Interface, is a worldstandard communication interface that allows MIDI-compatible MIDI Cable musical instruments and equipment to share musical information and MIDI OUT MIDI IN control one another. This makes it possible to create systems of DOU-10 MIDI instruments and equipment that offer far greater versatility and control than is available with isolated instruments. For example, most Clavinova MIDI keyboards (including the Clavinova, of course) transmit note and velocity (touch response) information via the MIDI OUT connector whenever a note is played on the keyboard. If the MIDI OUT connector is connected to the MIDI IN connector of a second keyboard (synthesizer, etc.) or a tone generator (essentially a synthesizer with no keyboard), the second keyboard or tone generator will respond precisely to notes played on the original transmitting keyboard. The result is that you can effectively play two instruments at once, providing thick multi-instrument sounds. This same type of musical information transfer is used for MIDI sequence recording. A sequence recorder can be used to record Data Being Recorded MIDI data received from a Clavinova, for example. When the Playback Data recorded data is played back, the Clavinova automatically plays MIDI OUT MIDI IN MIDI OUT MIDI IN the recorded performance in precise detail. DOU-10 The examples given above really only scratch the surface. MIDI can do much, much more. The Clavinova MIDI functions allow it to Clavinova be used in fairly sophisticated MIDI systems.

Connecting to an Apple Macintosh Series Computer....
Apple Macintosh Series Computer Set to the Mac position.
Connect the TO HOST connector of the Clavinova to the modem or printer port on your Macintosh, depending on which port your MIDI software is using for MIDI data communication, using a standard Macintosh 8-pin system peripheral cable. Set the HOST SELECT switch to the Mac position. You may also have to make other MIDI interface settings on the computer side, depending on the type of software you use (refer to your software owners manual). In any case the clock speed should be set to 1 MHz. G Mac Cable Connections


2 (HSK i) 1 (HSK 0) 5 (RxD-) 4 GND 3 (TxD-) 8 (RxD+) 7 (GP i) 6 (TxD+)
8-pin system peripheral cable. Data transfer rate: 31,250 bps.
Connecting to an IBM-PC/AT Series Computer.
IBM-PC/AT Series Computer Set to the PC-2 position.
Connect the TO HOST connector of the Clavinova to the RS-232C port on your IBM computer, using a standard 8-pin MINI DIN 9-pin D-SUB cross cable. Set the HOST SELECT switch to the PC-2 position. Refer to your software owners manual for information on any settings you might have to make on the computer side. G PC-2 Cable Connections
8 (CTS) 7 (RST) 2 (RxD) 5 (GND) 3 (TxD)


8-pin mini DIN 9-pin D-SUB cable. Data transfer rate: 38,400 bps.
If your system doesnt work properly with the connections and settings listed above, your software may require different settings. Check your software operation manual and if it requires a 31,250 bps. data transfer rate, set the HOST SELECT switch to PC-1. When using the TO HOST terminal to connect to a personal computer using Windows, a Yamaha MIDI driver must be installed in the personal computer. The Yamaha MIDI driver can be obtained at Yamahas home page on the World Wide Web, <>.

G Connector Pin Numbers

Using a USB Interface (such as the Yamaha UX256)
Connect the USB interface (Yamaha UX256 or equivalent) to your computer using a USB cable. Install the driver software supplied with the interface (or other appropriate driver software) on your computer according to the supplied instructions. Connect your instrument to the USB interface using either a standard Macintosh 8-pin system peripheral cable or MIDI cables. Refer to the manual supplied with your USB interface for details. G Connecting the USB Interface and Instrument via a Serial Cable



ccH 43H Parameter Soft Pedal Data Range (vvH) 00H-3FH:off, 40H-7FH:on
Same processing as for All Sound Off.
(7) Effect1 Depth ( Reverb Send Level )
ccH 5BH Parameter Effect1 Depth Data Range (vvH) 00H.7FH
(8) Poly (reception only)
ccH 7FH Parameter Poly Data Range (vvH) 00H
Adjusts the reverb send level.
(8) Effect4 Depth ( Variation Effect Send Level )
ccH 5EH Parameter Effect4 Depth Data Range (vvH) 00H.7FH
When control change reception is turned OFF in the Function mode, control change data will not be transmitted or received except for Bank Select and Mode messages. Local on/off, OMNI on/off are not transmitted. (The appropriate note off number is supplied with All Note Off transmission). When a voice bank MSB/LSB is received, the number is stored in the internal buffer regardless of the received order, then the stored value is used to select the appropriate voice when a program change message is received. The Multi-timbre and Poly modes are always active. No change occurs when OMNI ON, OMNI OFF, MONO, or POLY mode messages are received.
MIDI Data Format/MIDI-Datenformat/Format des donnes MIDI/Formato de datos MIDI
4. PROGRAM CHANGE Data format: [CnH] -> [ppH]
CnH = Program event (n = channel number) ppH = Program change number
P.C.#=Program Change number

Panel Data Contents

(1) 1'st Voice (2) Dual On/Off (3) Dual Voice (4) Dual Balance (5) Dual Detune (6) Dual Voice1 Octave (7) Dual Voice2 Octave (8) Dual Voice1 Effect Depth (9) Dual Voice2 Effect Depth (10) Split On/Off (11) Split Voice (12) Split Point (13) Split Balance (14) Split Voice1 Octave (15) Split Voice2 Octave (16) Split Voice1 Effect Depth (17) Split Voice2 Effect Depth (18) Split Dumper Mode (19) Reverb Type 1 (20) Reverb Type 2 (21) Reverb Depth1 (22) Reverb Depth2 (23) Effect Type 1 (24) Effect Type 2 (25) Effect Depth (26) Touch Sensitivity (27) Fixed Data (28) Left Pedal Function (29) Absolute tempo low byte (30) Absolute tempo high byte CLP-950 O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O CLP-930 O O O O O O O O O X X X X X X X X X O O O O O O O O O O O O

G The bracket on the front has 2 holes. Insert the screws into the holes on the front panel side of the bracket. G Die vorderen Winkelbleche haben zwei Schraubenbohrungen. Fhren Sie die Schraube jeweils in die Bohrung an der Stirnwandseite ein. G La partie avant de la ferrure comporte deux trous. Introduisez les vis de fixation dans les trois du ct du panneau avant de la ferrure. GLa mnsula de la parte frontal tiene 2 orificios. Inserte los tornillos en los orificios del lado del panel frontal de la mnsula.
G Be sure to place your hands at least 10 centimeters from either end of the main unit when positioning it. G Mindestens 10 cm innen unter die Tastatureinheit greifen. G Placez bien vos mains 10 cm au moins des extrmits du clavier, lors de sa mise en place. G Asegrese de colocar las manos por lo menos a 10 centmetros desde los extremos de la unidad principal cuando la site.
6 x 16 mm flat-head screws x 16 mm Senkschrauben 3 Vis tte plate de 6 x 16 mm 3 Tornillos de cabeza plana de 6 x 16 mm 3
C Install the main unit (A).
Place the main unit (A) on the side panels (B) with the screws on its bottom panel (toward the rear of the main unit) just behind the grooves in the brackets located at the top of the side panels. Then slide the main unit forward until it stops. WATCH YOUR FINGERS WHEN DOING THIS!! Align the holes on the bottom panel of the main unit with the holes in the brackets on the side panels (also center the main unit to produce equal clearance on the left and right sides, as shown in the illustration), then use the four 6 x 16 millimeter flat-head screws 3 to attach the main unit. The four screws can be attached from the rear.
CAUTION Do not hold the keyboard in any position other than the position shown in the above illustration. Fingers can become pinched between the main unit and the rear or side panels, be extra careful so as not to drop the main unit.
C Montieren Sie die Tastatureinheit (A).
Setzen Sie die Tastatureinheit (A) so auf den fertigen Stnder, da die beiden Schrauben an ihrer Unterseite hinter den Winkelblechen mit Fhrungsschlitz an der Hinterseite des Stnders zu liegen kommen. Schieben Sie die Tastatureinheit dann bis zum Anschlag in die Schlitze. KLEMMEN SIE IHRE FINGER DABEI NICHT EIN!! Richten Sie die Schraubenbohrungen an der Unterseite der Tastatureinheit mit den Bohrungen der Winkelbleche aus (achten Sie auch darauf, da sie mittig auf dem Stnder steht, wie in der Abbildung gezeigt), um die Tastatureinheit dann mit den vier 6 x 16 mm Senkschrauben 3 festzuschrauben. Die vier Schrauben knnen von der Rckseite her eingefhrt werden.

V Conecte el cable de altavoz.
El cable de altavoz procedente de la caja de altavoces debe enchufarse al conector correspondiente de la unidad principal. La clavija slo entra en un sentido (la lengeta del conector debe orientarse hacia atrs de la unidad principal, como se muestra en la ilustracin), por lo que no deber forzarla al revs. Una vez conectada, coloque los soportes de cable en el panel trasero como se muestra, y enganche el cable en los soportes.
B Raccordez le cble du pdalier
Le cble du pdalier qui sort du logement de pdalier doit tre raccord au connecteur PEDAL implant larrire du panneau de dessus de linstrument. Une fois branch, fixez les attaches de cble sur le panneau latral en procdant de la faon reprsente sur la figure, puis embotez le cble dans les attaches.
B Conecte el cable de los pedales.
El cable de los pedales procedente de la caja de pedales debe enchufarse al conector PEDAL situado en la parte posterior del lado inferior de la unidad principal. Una vez se ha conectado, coloque los soportes de cable del panel lateral como se muestra, y sujete el cable en los soportes.


Cord holder Kabelhalter Serre-cble Soporte del cable
G A voltage selector is provided in some areas. G Spannungswhler (nur in bestimmten Verkaufsgebieten) G Un slecteur de tension est prvu pour certaines rgions G El selector de tensin est provisto para ciertos destinos.

N Voltage Selector

Before connecting the AC power cord, check the setting of the voltage selector which is provided in some areas. To set the selector for 110V, 127V, 220V or 240V main voltages, use a minus screwdriver to rotate the selector dial so that the correct voltage for your region appears next to the pointer on the panel. The voltage selector is set at 240V when the unit is initially shipped. After the proper voltage has been selected, connect the AC power cord to the AC INLET.
CAUTION An improper voltage setting can cause serious damage to the Clavinova or result in improper operation.
M Attach the rear panel (E).
With the rear panel slightly angled as shown in the illustration, lower it onto the feets protruding edge at the rear of the pedal box. At this time, run the AC power cord through the cutout on the rear panel. Then, secure the top of the rear panel to the side panel brackets using two 4 x 12 mm round-head screws 2. Finally, secure the bottom of the rear panel to the pedal box using four 4 x 20 mm tapping screws 4. Move the instrument to the location where it will be used and connect the AC power cord to an AC wall outlet. A plug adaptor may be also provided in some areas to match the pin configuration of the AC wall outlets in your area
I After completing the assembly, please check the following.

This product should be used only with the components supplied or; a cart, rack, or stand that is recommended by the manufacturer. If a cart, rack, or stand is used, please observe all safety markings and instructions that accompany the accessory product.
The power supply cord (plug) should be disconnected from the outlet when electronic products are to be left unused for extended periods of time. Cords should also be disconnected when there is a high probability of lightning and/or electrical storm activity.
This product may be equipped with a polarized plug (one blade wider than the other). If you are unable to insert the plug into the outlet, turn the plug over and try again. If the problem persists, contact an electrician to have the obsolete outlet replaced. Do NOT defeat the safety purpose of the plug.

11. 12.

Care should be taken that objects do not fall and liquids are not spilled into the enclosure through any openings that may exist.
Some electronic products utilize external power supplies or adapters. Do NOT connect this type of product to any power supply or adapter other than one described in the owners manual, on the name plate, or specifically recommended by Yamaha.
Electrical/electronic products should be serviced by a qualified service person when: a. The power supply cord has been damaged; or b. Objects have fallen, been inserted, or liquids have been spilled into the enclosure through openings; or c. The product has been exposed to rain: or d. The product dose not operate, exhibits a marked change in performance; or e. The product has been dropped, or the enclosure of the product has been damaged.
WARNING: Do not place this product or any other objects on the power cord or place it in a position where anyone could walk on, trip over, or roll anything over power or connecting cords of any kind. The use of an extension cord is not recommended! If you must use an extension cord, the minimum wire size for a 25' cord (or less) is 18 AWG. NOTE: The smaller the AWG number, the larger the current handling capacity. For longer extension cords, consult a local electrician.

13. 14.

Do not attempt to service this product beyond that described in the user-maintenance instructions. All other servicing should be referred to qualified service personnel.
Ventilation: Electronic products, unless specifically designed for enclosed installations, should be placed in locations that do not interfere with proper ventilation. If instructions for enclosed installations are not provided, it must be assumed that unobstructed ventilation is required.
This product, either alone or in combination with an amplifier and headphones or speaker/s, may be capable of producing sound levels that could cause permanent hearing loss. DO NOT operate for a long period of time at a high volume level or at a level that is uncomfortable. If you experience any hearing loss or ringing in the ears, you should consult an audiologist. IMPORTANT: The louder the sound, the shorter the time period before damage occurs.



SRP-270 LA22A450c1 WD-14575RD Beosound 3 SU-A700 807si C5051I MP-C789 LAC-M7600R 150 Jalou Review Black ASH 23LB230B4U ZWF16381W VGN-AR71J RX-6012R VPL-CX2 CDX-M7810 E350D Asus P4TM Hybrid OKI C801 MR-8HD Travelmate 8000 EWF8040W DMC-FZ30PP KDL-32EX707 Burning ROM MP-F62 HDR-SR8 LE23R71B EL-5250F Stylist HT462DZ KS-AX6300 Galeo 2200 IC-U200 Booklet DUO Luxe CFD-V27L TDR125 Zoppas P43 40820 E2550 F250-2006 RC6500 Aficio2022-27 AQV09FAN 155B8BV FL522CN Aspire 4935 Prof 1300 SAA7133 MRS-8 Series II KEH-P25RDS DCR-VX1000E PR-D2V ZR830 Harmony 525 Impact ER-145 KX-TG2420B Soundsoap 2 MAX-A55 Hideaway L14850 X5 2001 EC990SW VW-VMH3 Citation 24 Gastro 200 SLV-SE700d2 Kxdt343 Canon GL2 25413 RSP-1066 Preston Aspire 1670 DMS 700 21PV908 Yamaha F-20 Twinset Mark 812 UN40C7000 EWF810 EHT6435K J3-20 Uk KDL-40Z5800 Gzmg20AA-GZ-mg20 Fighter 3TB Aficio 2051 Teac P-11 CCD-TRV47E Bearpaw-4800TA-PRO Scanmaker V310 DD-TEC10E BT90R SL-PA10


manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding



1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101