Reviews & Opinions
Independent and trusted. Read before buy Yamaha DSP-A590!

Yamaha DSP-A590

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Yamaha DSP-A590 Home Cinema Amplifier, size: 374 KB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Yamaha DSP-A590About Yamaha DSP-A590
Here you can find all about Yamaha DSP-A590 like manual and other informations. For example: review.

Yamaha DSP-A590 manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Yamaha DSP-A590 please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Yamaha DSP-A590 photo ]

Video review

2.1 Stereo(Mordaunt Short Avant 902i,Yamaha DSP A590,Sony ...

 

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

No opinions have been provided. Be the first and add a new opinion/review.

 

Documents

doc0

DSP-A590

Natural Sound Digital Sound Field Processing Amplifier Amplificateur de champ sonore numrique de la srie Natural Sound Natural Sound Digitaler Klangfeldverstrker Digital ljudfltsfrstrkare med naturligt ljud Amplificatore digitale a suono naturale per lelaborazione del campo sonoro Amplificador de procesamiento de campo de sonido digital de Sonido natural Digitale geluidsveldprocessing-versterker met natuurlijke klank
OWNERS MANUAL MODE DEMPLOI BEDIENUNGSANLEITUNG BRUKSANVISNING MANUALE DI ISTRUZIONI MANUAL DE INSTRUCCIONES GEBRUIKSAANWIJZING
SUPPLIED ACCESSORIES ACCESSOIRES FOURNIS MITGELIEFERTE ZUBEHORTEILE MEDFOLJANDE TILLBEHOR ACCESSORI IN DOTAZIONE ACCESORIOS INCLUIDOS BIJGELEVERDE ACCESSOIRES
Remote Control Transmitter Emetteur de tlcommande Fernbedienungsgeber Fjrrkontrollsndare Telecomando Transmisor del control remoto Afstandbediening

q q q q q q q

After unpacking, check that the following parts are included. Aprs le dballage, vrifier que les pices suivantes sont incluses. Nach dem Auspacken berprfen, ob die folgenden Teile vorhanden sind. Kontrollera efter det apparaten packats upp att fljande delar finns med. Verificare che tutte le parti seguenti siano contenute nellimballaggio dellapparecchio. Desembale el aparato y verificar que los siguientes accesorios estn en la caja. Controleer na het uitpakken of de volgende onderdelen voorhanden zijn.
Batteries (size AA, R6, UM-3) Piles (taille AA, R6, UM-3) Batterien (Gre AA, R6, UM-3) Batterier (storlek AA, R6, UM-3) Batterie (dimensioni AA, R6, UM-3) Pilas (tamao AA, R6, UM-3) Batterijen (maat AA, R6, UM-3)
This product complies with the radio frequency interference requirements of the Council Directive 82/499/EEC and/or 87/308/EEC. Cet appareil est conforme aux prescriptions de la directive communautaire 87/308/CEE. Diese Gerte entsprechen der EG-Richtlinie 82/499/EWG und/oder 87/308/EWG. Dette apparat overholder det gaeldende EF-direktiv vedrrende radiostj. Questo apparecchio conforme al D.M.13 aprile 1989 (Direttiva CEE/87/308) sulla soppressione dei radiodisturbi. Este producto est de acuerdo con los requisitos sobre interferencias de radio frecuencia fijados por el Consejo Directivo 87/308 CEE. Dit product voldoet aan de EEG normen betreffende radio-frekwentie storingen 82/499/EEG en/of 87/308/EEG.
Thank you for selecting this YAMAHA digital sound field processing amplifier.

English

FEATURES
q 5 Speaker Configuration Front: 70W + 70W (8) RMS Output Power, 0.04% THD, 2020,000 Hz Center: 70W (8) RMS Output Power, 0,07% THD, 2020,000 Hz Rear: 20W + 20W (8) RMS Output Power, 0.3% THD, 1 kHz q Digital Sound Field Processor 6 Programs for Digital Sound Field Processing 2 Programs for Dolby Surround Decoding (DOLBY PRO LOGIC and DOLBY PRO LOGIC ENHANCED) q Automatic Input Balance Control for Dolby Surround q Test Tone Generator for Easier Speaker Output Balance Adjustment q 3 Center Channel Modes (NORMAL/WIDE/PHANTOM) q Video Signal Input/Output Capability (Including S Video Connections) q SLEEP Timer q Remote Control Capability

CONTENTS

Supplied Accessories..2 Caution..4 Profile of This Unit..5 Speaker Setup for This Unit..6 Connections..7 Speaker Balance Adjustment.12 Basic Operations..15 Using Digital Sound Field Processor (DSP).18 Setting the SLEEP Timer..22 Remote Control Transmitter.23 Notes about the Remote Control Transmitter...24 Troubleshooting..25 Specifications..26
CAUTION : READ THIS BEFORE OPERATING YOUR UNIT.
To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. Install this unit in a cool, dry, clean place away from windows, heat sources, sources of excessive vibration, dust, moisture and cold. Avoid sources of humming (transformers, motors). To prevent fire or electrical shock, do not expose the unit to rain or water. Never open the cabinet. If something drops into the set, contact your dealer. Do not use force on switches, controls or connection wires. When moving the unit, first disconnect the power plug and the wires connected to other equipment. Never pull the wires themselves. The openings on the cabinet assure proper ventilation of the unit. If these openings are obstructed, the temperature inside the cabinet will rise rapidly and eventually damage the circuits. Therefore, avoid placing objects against these openings and do not install the unit where the flow of air through the ventilation openings could be impeded. Always set the VOLUME control to before starting the audio source play. Increase the volume gradually to an appropriate level after playback has been started. Do not attempt to clean the unit with chemical solvents; this might damage the finish. Use a clean, dry cloth. Be sure to read the TROUBLESHOOTING section regarding common operating errors before concluding that the unit is faulty. When not planning to use this unit for long periods of time (ie., vacation, etc.), disconnect the AC power plug from the wall outlet. disconnect the antenna cable when there is an electrical storm. IMPORTANT Please record the serial number of this unit in the space below. Serial No.: The serial number is located on the rear of the unit. Retain this Owners Manual in a safe place for future reference. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

3. 4. 5.

The apparatus is not disconnected from the AC power source as long as it is connected to the wall outlet, even if the apparatus itself is turned off.

For U.K. customers

If the socket outlets in the home are not suitable for the plug supplied with this appliance, it should be cut off and an appropriate 3 pin plug fitted. For details, refer to the instructions described below. Note: The plug severed from the mains lead must be destroyed, as a plug with bared flexible cord is hazardous if engaged in a live socket outlet.

6. 7. 8. 9.

Special Instructions for U.K. Model
IMPORTANT THE WIRES IN THE MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE: Blue: NEUTRAL Brown: LIVE As the colours of the wires in the main lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED. Make sure that neither core is connected to the earth terminal of the three pin plug.
10. To prevent lightning damage, disconnect the AC power plug and 11. Grounding or polarization Precautions should be taken so that
the grounding or polarization of an appliance is not defeated.

12. AC outlet

Do not connect audio equipment to the AC outlet on the rear panel if that equipment requires more power than the outlet is rated to provide.
13. Voltage Selector (General Model only)
The voltage selector on the rear panel of this unit must be set for your local main voltage BEFORE plugging into the AC main supply. Voltages are 110/120/220/240V AC, 50/60 Hz.

PROFILE OF THIS UNIT

You are the proud owner of a Yamaha stereo amplifier an extremely sophisticated audio component. The Digital Sound Field Processor (DSP) built into this unit takes full advantage of Yamahas undisputed leadership in the field of digital audio processing to bring you a whole new world of listening experiences. Follow the instructions in this manual carefully when setting up your system, and this unit will sonically transform your room into a wide range of listening environments movie theater, concert hall, and so on. In addition, you get incredible realism from Dolby-encoded video sources using the built-in Dolby Pro Logic Surround Decoder. Please read this operation manual carefully and store it in a safe place for later reference.
Digital Sound Field Processing
What is it that makes live music so good? Todays advanced sound reproduction technology lets you get extremely close to the sound of a live performance, but chances are youll still notice something missing: the acoustic environment of the live concert hall. Extensive research into the exact nature of the sonic reflections that create the ambience of a large hall has made it possible for Yamaha engineers to bring you this same sound in your own listening room, so youll feel all the sound of a live concert. Whats more, our technicians, armed with sophisticated measuring equipment, have even made it possible to capture the acoustics of a variety of venues such as an actual concert hall, theater, etc. to allow you to accurately recreate one of several actual live performance environments, all in your own home.

The center speaker is not used in this configuration. If the digital sound field program DOLBY PRO LOGIC or DOLBY PRO LOGIC ENHANCED is selected, the center sound is output from the left and the right front speakers. However, the sound effect of other programs can be the same as that of the 5-speaker configuration. q Be sure to set the center channel mode to the PHANTOM position. (For details, refer to page 13.) Front L Front R

Dialogue

Surround sound Rear L Rear R

SPEAKER PLACEMENT

The recommended speaker configuration, the 5-speaker configuration, will require two speaker pairs: front speakers (your normal stereo speakers), and rear speakers, plus a center speaker. When you place these speakers, refer to the following.
Front: Front R Center Front L TV set Rear R
In normal position. (The position of your present stereo speaker system.) Rear: Behind your listening position, facing slightly inward. Nearly six feet (approx. 1.8 m) up from the floor. Center: Precisely between the front speakers. (To avoid interference with TV sets, use a magnetically shielded speaker.)

Rear L

CONNECTIONS
Before attempting to make any connections to or from this unit, be sure to first switch OFF the power to this unit and to any other components to which connections are being made.
CONNECTIONS WITH OTHER COMPONENTS
When making connections between this unit and other components, be sure all connections are made correctly, that is to say L (left) to L, R (right) to R, + to + and to. Also, refer to the owners manual for each component to be connected to this unit.

Turntable

Monitor TV
LD player, TV tuner, etc.
Video cassette recorder 2

VIDEO OUT

VIDEO OUT AUDIO OUT VIDEO IN

AUDIO OUT

VIDEO IN

OUTPUT

AUDIO IN

(Europe model)

8MIN. /SPEAKER

FRONT REAR CENTER REAR

AC OUTLETS

SWITCHED l20W MAX. TOTAL

CENTER C DUAL SINGLE D

LOW PASS fc:200Hz

8 VIDEO VCR 2 MONITOR IN OUT OUT

VIDEO SIGNAL

MONITOR LD/TV OUT VCR 1 IN OUT VCR 2 IN OUT
C D:4MIN./SPEAKER SINGLE:8MIN./SPEAKER

SPEAKERS SPEAKERS

A OR B:8MIN. /SPEAKER A B:l6MIN. /SPEAKER

TAPE REC PB OUT TAPE

IN LD/TV

OUT VCR 1

OUT VCR 2

-l0 dB 0 dB FRONT LEVEL

AUDIO SIGNAL
To AC outlet AUDIO OUT VIDEO OUT LINE OUT AUDIO IN OUTPUT VIDEO IN OUTPUT

FRONT LEVEL switch <U.K., Europe and Australia models only> Normally set to 0 dB. If desired, you can decrease the output level at the FRONT SPEAKERS terminals by 10 dB by setting this switch to 10 dB.

C DUAL SINGLE

l0 dB 0 dB FRONT LEVEL
Center speaker Center speaker

How to Connect:

Connect the SPEAKERS terminals to your speakers with wire of the proper gauge, cut as short as possible. If the connections are faulty, no sound will be heard from the speakers. Make sure that the polarity of the speaker wires is correct, that is, + and markings are observed. If these wires are reversed, the sound will be unnatural and will lack bass. Do not let the bare speaker wires touch each other and do not let them touch the metal parts of this unit as this could damage this unit and/or speakers. Note Use speakers with the specified impedance shown on the rear of this unit.
For connecting to the FRONT SPEAKERS terminals Red: positive (+) Black: negative ()
For connecting to the REAR and CENTER SPEAKERS terminals Red: positive (+) Black: negative ()
Unscrew the knob. Insert the bare wire. 3
[Remove approx. 5mm (1/4) insulation from the speaker wires.] Tighten the knob and secure the wire.
Press up the tab. Insert the bare wire.
[Remove approx. 5mm (1/4) insulation from the speaker wires.] Release the tab and secure the wire.
<General model only>
Banana Plug connections are also possible. Simply insert the Banana Plug connector into the corresponding terminal.
ABOUT THE ACCESSORY TERMINALS

AC OUTLET(S) (SWITCHED)

(Europe and General models).. 2 SWITCHED OUTLETS (U.K. and Australia models). 1 SWITCHED OUTLET Use these to connect the power cords from your components to this unit. The power to the SWITCHED outlets is controlled by this units POWER switch or the provided remote control transmitters POWER key. These outlets will supply power to any component whenever this unit is turned on. The maximum power (total power consumption of components) that can be connected to the SWITCHED AC OUTLET(S) is 120 watts.

FRONT OUTPUT terminals

These terminals are for front channel line output. There is no connection to these terminals when you use the built-in amplifier. However, if you drive front speakers with an external stereo power amplifier, connect the input terminals of the external amplifier (MAIN IN or AUX terminals of a power amplifier or an integrated amplifier) to these terminals.

REAR OUTPUT terminals

These terminals are for rear channel line output. There is no connection to these terminals when you use the built-in amplifier. However, if you drive rear speakers with an external stereo power amplifier, connect the input terminals of the external amplifier (MAIN IN or AUX terminals of a power amplifier or an integrated amplifier) to these terminals.
GND terminal (For turntable use)
Connecting the ground wire of the turntable to this terminal will normally minimize hum, but in some cases better results may be obtained with the ground wire disconnected.

LOW PASS terminal

This terminal is for output to a monaural amplifier driving a subwoofer. Only frequencies below 200 Hz from the front and center channels are output.

CENTER OUTPUT terminal

This terminal is for center channel line output. There is no connection to this terminal when you use the built-in amplifier. However, if you drive a center speaker with an external power amplifier, connect the input terminal of the external amplifier to this terminal.
ADDING A SUBWOOFER You may wish to add a subwoofer to reinforce the bass frequencies. Connect the LOW PASS terminal to the INPUT terminal of the subwoofer amplifier, and connect the speaker terminals of the subwoofer amplifier to the subwoofer. With some subwoofers, including the Yamaha Active Servo Processing Subwoofer System, the amplifier and subwoofer are in the same unit.

FRONT CENTER REAR

Subwoofer system
SPEAKER BALANCE ADJUSTMENT
This procedure lets you adjust the sound output level balance between the front, center, and rear speakers using the built-in test tone generator. With this adjustment, the sound output level heard at the listening position will be the same from each speaker. This is important for the best performance of the digital sound field processor. The adjustment of each speaker output level should be done at your listening position with the remote control transmitter. Otherwise, the result may not be satisfactory.

REC PAUSE

TAPE MON

PRO LOGIC

ENHANCED CNCT VIDEO

CENTER LEVEL

MONO MOVIE STADIUM

DISCO EFFECT ON/OFF

REAR LEVEL

DELAY TIME

VOLUME

Set to the position.

Select the PRO LOGIC or PRO LOGIC ENHANCED mode, so that the corresponding name is illuminated on the display.
Select the front speakers to be used.

SPEAKERS A

EFFECT PRO LOGIC ENHANCED CONCERT VIDEO MONO MOVIE STADIUM DISCO ROCK CONCERT CONCERT HALL
* If you use two front speaker systems, press both the A and B switches.
BASS l l TREBLE l 0 l L 5 BALANCE l 0 l R

Set to the 0 position.

Select the center channel output mode according to your speaker configuration. (Refer to SPEAKER CONFIGURATION on page 6.)

CENTER MODE

NORMAL WIDE PHANTOM

Flashes continuously.

Turn up the volume.
On the feature of each mode, refer to the Note shown below. You will hear a test tone (like pink noise) from the left front speaker, then the center speaker, then the right front speaker, and then the rear speakers, for about two seconds each. The display changes as shown below. Front (L) Center
Note In step 6, when you select the center channel output mode, note the following. For 5 speaker configuration) NORMAL: Select this mode when you use a center speaker that is smaller than the front speakers. In this mode, the bass tone will be output from the front speakers. WIDE: Select this mode when you use the center speaker approximately same sized as the front speakers. For 4 speaker configuration) PHANTOM: Select this mode when you do not use the center speaker. The center sound will be output from the left and right front speakers.

Rear (L and R)

Front (R)
* The test tone from the left rear speaker and the right rear speaker will be heard at the same time.

CONTINUED

Adjust the BALANCE control so that the effect sound output level of the left front speaker and the right front speaker are the same.

BALANCE l 4 L l R

Cancel the test tone.
Stops flashing and disappears
Adjust the sound output level of the center speaker to be at the same level as that of the front speakers with the CENTER LEVEL keys. Lights up.

Adjustable

Adjust the sound output level of the rear speakers to be at the same level as that of the front speakers with the REAR LEVEL keys. Lights up.
Notes Once you have completed these adjustments, you can adjust whole sound level on your audio system by using the VOLUME control (or the VOLUME keys on the remote control transmitter). q If you use external power amplifiers, their volume controls may also be adjusted to achieve proper balance. q In step 10, if the center channel mode is in the PHANTOM position, the sound output level of the center speaker cannot be adjusted. This is because in this mode, the center sound is automatically output from the left and right front speakers. q <U.K., Europe and Australia models only> If there is insufficient sound output from the center and rear speakers, you may decrease the front speaker output level by setting the FRONT LEVEL switch on the rear panel to 10 dB.

BASIC OPERATIONS 3 1, 6

TO PLAY A SOURCE

Play the source.

Adjust to the desired output level.
Select the desired input source by using the input selector buttons. (For video sources, turn the TV/monitor ON.)
TAPE MONITOR TUNER CD PHONO
If desired, adjust the BASS, TREBLE, BALANCE controls, etc. (refer to page 17) and use the digital sound field processor. (Refer to page 20.)

* The name of the selected input source will appear in the display.
Notes on using the input selector buttons Note that pressing on each input selector button selects the source which is connected to the corresponding input terminals on the rear panel. * To select the source connected to the VIDEO AUX terminals on the front panel, press VIDEO AUX. q The selection of TAPE MONITOR cannot be canceled by pressing another input selector button. To cancel it, press TAPE MONITOR again. When you select a button other than TAPE MONITOR, make sure that TAPE MONITOR is not also selected. q If you select the input selector button for a video source without canceling the selection of TAPE MONITOR, the playback result will be the video image from the video source and the sound from the audio tape. q Once you play a video source, its video image will not be interrupted even if the input selector button for an audio source is selected.

To turn off the power

Press the POWER switch again. * If you use two front speaker systems, press both the A and B switches.
TO RECORD A SOURCE TO TAPE (OR DUB FROM TAPE TO TAPE)
Select the source to be recorded.
Note DSP, VOLUME, BASS, TREBLE and BALANCE control settings have no effect on the material being recorded.
Play the source and then turn the VOLUME control up to confirm the input source.
Set the tape deck or VCR to the recording mode.
If the tape deck is used for recording, you can monitor the sounds being recorded by pressing TAPE MONITOR.
Selecting the SPEAKER system
Because one or two speaker systems (as front speakers) can be connected to this unit, the SPEAKERS switches allow you to select speaker system A or B, or both at once.
Adjusting the BASS and TREBLE controls

BASS l l TREBLE l 0 l 4

: Turn this clockwise to increase (or counterclockwise to decrease) the low frequency response.
Adjusting the BALANCE control
Adjust the balance of the output volume to the left and right speakers to compensate for sound imbalance caused by speaker location or listening room conditions. TREBLE : Turn this clockwise to increase (or counterclockwise to decrease) the high frequency response.
Note These controls are effective only for the sound from the front speakers.
Note This control is effective only for the sound from the front speakers.
When you listen with headphones
Connect the headphones to the PHONES jack. You can listen to the sound to be output from the front speakers through headphones. When listening with headphones privately, set both the SPEAKERS A and B switches to the OFF position and switch off the digital sound field processor (so that no DSP program name is illuminated on the display) by pressing the EFFECT switch.

PHONES

USING DIGITAL SOUND FIELD PROCESSOR (DSP)
This unit incorporates a sophisticated, multi-program digital sound field processor, which allows you to expand and shape the audio sound field from both the audio and video sources, for a theater-like experience in the listening/viewing room. This digital sound field processor has 8 programs; 6 programs for digital sound field processing and 2 programs for the Dolby Pro Logic Surround sound system (DOLBY PRO LOGIC and DOLBY PRO LOGIC ENHANCED). You can create an excellent audio sound field by selecting the suitable program and adding desired adjustments. In addition, when the DOLBY PRO LOGIC or DOLBY PRO LOGIC ENHANCED program is selected, the built-in automatic input balance control functions. This presents you the best surround condition without manual adjustment.

Front Panel

Displays your selection on the DSP or other informations.

DELAY CENTER REAR

TAPE MONITOR

NORMAL WIDEPHANTOM

PRO LOGIC CONCERT MONO STADIUM ROCK CONCERT ENHANCED VIDEO MOVIE DISCO CONCERT HALL

EFFECT

ENHANCED

CONCERT VIDEO

MONO MOVIE

STADIUM

ROCK CONCERT

CONCERT HALL

Switches on/off the digital sound field processor (DSP)
Selects a digital sound field program. Selects the center channel output mode. (For details, refer to page 13.) Adjusts sound output level at each speaker. (For details, refer to Adjusts the delay time. page 20 and 21.) (For details, refer to page 21.)
Remote Control Transmitter

SLEEP DISC SKIP

PAUSE/STOP
Used for speaker balance adjustment (For details, refer to page 12, 13 and 14.)

DECK A/B

PRESET

A/B/C/D/E

Selects a digital sound field program.
Adjusts sound output level at each speaker. (For details, refer to page 20 and 21.)
Switches on/off the digital sound field processor (DSP).

Indicates the SLEEP time. Note The SLEEP timer setting can also be canceled by turning off the power with the POWER switch or disconnecting the power plug of this unit from the AC outlet.
Flashes on and off continuously.
Whenever the SLEEP key is pressed, the SLEEP time will change as follows.

(Minutes)

The SLEEP timer is OFF. (The indication before the SLEEP key is pressed.) After a while, the display returns to the indication before the SLEEP timer is set, and the SLEEP indicator stops flashing and lights up.
The unit will be turned off automatically at the selected SLEEP time.
REMOTE CONTROL TRANSMITTER
The remote control transmitter provided with this unit is designed to control all the most commonly used functions of the unit. If the CD player, tuner and tape deck connected to this unit are YAMAHA components, then this remote control transmitter will also control various functions of each component.
KEY FUNCTIONS For Control of This Unit
* Refer to SETTING THE SLEEP TIMER on the previous page.
POWER SLEEP DISC SKIP SKIP PAUSE/STOP PLAY CD PHONO

Turns the power on/off.

DECK A/B PRESET

Selects input source.

Turns the master volume level up/down. * For the DSP control keys, refer to the page 18.
For Other Component Control
Identify the remote control transmitter keys with your components keys. If these keys are identical, their function will be the same. On each key function, refer to the corresponding instruction on your components manual.
Controls the compact disc player. * DISC SKIP is applicable only to a compact disc changer.
Controls the tape deck. * DIR A, B and DECK A/B are applicable only to a double cassette tape deck. * For a single cassette deck with automatic reverse function, pressing DIR A will reverse the direction of tape running.
Controls the tuner. * +: Selects higher preset station number. : Selects lower preset station number. A/B/C/D/E: Selects the page (A E) of preset stations.
STANDBY mode (U.K. and Europe models only)
While the power is on, pressing the POWER key on the remote control transmitter switches the unit to the STANDBY mode. (In this mode, the indicator is half illuminated.)

POWER on mode

STANDBY mode
NOTES ABOUT THE REMOTE CONTROL TRANSMITTER
Battery installation Remote control transmitter operation range

Remote control sensor

Within approximately 6 m (19.7 feet)

Battery replacement

If you find that the remote control transmitter must be used closer to the main unit, the batteries are weak. Replace both batteries with new ones. Notes q Use only AA, R6, UM-3 batteries for replacement. q Be sure the polarities are correct. (See the illustration inside the battery compartment.) q Remove the batteries if the remote control transmitter will not be used for an extended period of time. q If batteries leak, dispose of them immediately. Avoid touching the leaked material or letting it come in contact with clothing, etc. Clean the battery compartment thoroughly before installing new batteries.

Notes q There should be no large obstacles between the remote control transmitter and the main unit. q If the remote control sensor is directly illuminated by strong lighting (especially an inverter type of fluorescent lamp etc.), it might cause the remote control transmitter not to work correctly. In this case, reposition the main unit to avoid direct lighting.

TROUBLESHOOTING

If the unit fails to operate normally, check the following points to determine whether the fault can be corrected by the simple measures suggested. If it cannot be corrected, or if the fault is not listed in the SYMPTOM column, disconnect the power cord and contact your authorized YAMAHA dealer or service center for help. SYMPTOM The unit fails to turn on when the POWER switch is pressed. No sound or no picture. CAUSE Power cord is not plugged in or is not completely inserted. Incorrect output cord connections. REMEDY Firmly plug in the power cord. Connect the cords properly. If the problem persists, the cords may be defective. Press the appropriate input selector corresponding to the input source. Turning the unit off and then on will reset the protection circuit. Do not make the SLEEP timer function. Adjust it to the appropriate position. Connect the cords properly. If the problem persists, the cords may be defective. Firmly connect the audio plugs. If the problem persists, the cords may be defective. Make the GND connection between the turntable and this unit. The player should be connected to the unit through the MC head amplifier. Turn the power to the component on.
Appropriate input selector is not pressed. The sound suddenly goes off. The protection circuit has been activated because of short circuit etc. The SLEEP timer functioned. Only one side speaker outputs the sound. Incorrect setting of the BALANCE control. Incorrect cord connections.

Sound hums.

Incorrect cord connections.
No connection from the turntable to the GND terminal. The volume level is low while playing a record. The volume level cannot be increased, or sound is distorted. No sound from the rear speakers. The record is being played on a turntable with an MC cartridge. The power to the component connected to the REC OUT terminals of this unit is off. The sound output level to the rear speakers is set to 0. The monaural sound source is played in DOLBY PRO LOGIC or DOLBY PRO LOGIC ENHANCED mode. No sound from the center speaker. The sound output level to the center speaker is set to 0. The center channel mode is in PHANTOM mode. Incorrect sound field program selection.
Turn up the sound output level with the REAR LEVEL control. Select another program suitable for the monaural sound source. Turn up the sound output level with the CENTER LEVEL control. Select NORMAL or WIDE.
Select the appropriate program. No sound field program is selected. The remote control transmitter does not work. Direct sunlight or lighting (of an inverter type of flourescent lamp etc.) is striking the remote control sensor of the main unit. The batteries of this remote control transmitter are too weak. The sound is degraded when monitoring is performed by using the headphones connected to the compact disc player or cassette deck which are connected with this unit. The power to this unit is off. Change the position of the main unit.

Replace the batteries with new ones. Turn the power to this unit on.

SPECIFICATIONS

AUDIO SECTION
Minimum RMS Output Power per Channel Front L, R 8 ohms, 20 Hz to 20 kHz, 0.04% THD..70W+70W Center 8 ohms, 20 Hz to 20 kHz, 0.07% THD..70W Rear L, R 8 ohms, 1 kHz, 0.3% THD..20W+20W Maximum Output Power [General model only] 8 ohms, 1 kHz, 10% THD (FRONT L/R).105W+105W Dynamic Power per Channel (by IHF Dynamic Headroom measuring method) 8/6/4/2 ohms...95/120/150/170W DIN Standard Output Power per Channel 4 ohms, 1 kHz, 0.7% THD [Europe model only]..100W IEC Power 8 ohms, 1 kHz, 0.1% THD [Europe model only]..78W Power Band Width 8 ohms, 30W, 0.08% THD..10 Hz to 50 kHz Damping Factor (SPEAKERS A) 8 ohms, 20 Hz to 20 kHz..80 or more Input Sensitivity/Impedance PHONO MM...2.5 mV/47 k-ohms CD/TAPE/TUNER/LDTV/VCR.150 mV/47 k-ohms Maximum Input Signal (1 kHz, 0.5% THD) PHONO MM...115 mV CD/TAPE/TUNER/LDTV/VCR (EFFECT ON)..2.2V Output Level/Impedance REC OUT..150 mV/1.0 k-ohms PRE OUT..2.2V/1.2 k-ohms LPF (EFFECT OFF)..3.5V/1.5 k-ohms Headphone Jack Rated Output/Impedance Output Level (8 ohms, 1 kHz, 150 mV ).0.5V Impedance..390 ohms Frequency Response (20 Hz to 20 kHz) CD/TAPE/TUNER/LDTV/VCR (FRONT L/R).00.5 dB RIAA Equalization Deviation PHONO MM...00.5 dB Total Harmonic Distortion PHONO MM to REC OUT 20 Hz to 20 kHz, 1V..0.02% or less CD/TAPE/TUNER/LDTV/VCR to SP OUT FRONT L/R (EFFECT OFF) 20 Hz to 20 kHz, 30W/8 ohms.0.02% or less REAR L/R 1 kHz, 10W/8 ohms..0.3% or less Signal-to-Noise Ratio (IHF-A Network) PHONO MM to REC OUT (5 mV Input Shorted) [U.K. and Europe models]..82 dB [Australia and General models]..85 dB CD/TAPE/TUNER/LDTV/VCR to SP OUT (Input Shorted, EFFECT OFF)..99 dB or more Residual Noise (IHF-A Network) FRONT L/R..140 V or less Channel Separation (Vol. 30 dB, EFFECT OFF) PHONO MM (Input Shorted 1 kHz/10 kHz)..60 dB or more/50 dB or more CD/TAPE/TUNER/LDTV/VCR (Input 5.1 k-ohms Shorted 1 kHz/10 kHz)..60 dB or more/44 dB or more Tone Control Characteristics BASS: Boost/cut..10 dB (50 Hz) Turnover Frequency..(350 Hz) TREBLE: Boost/cut..10 dB (20 kHz) Turnover Frequency.(3.5 kHz) Filter Characteristics LPF (fc=200 Hz)...6 dB/oct Gain Tracking Error (0 to 60 dB).3 dB or less

VIDEO SECTION

Video Signal Level..1 Vp-p/75 ohms S-Video Signal Level Y...1 Vp-p/75 ohms C...0.286 Vp-p/75 ohms Maximum Input Level..1.5 Vp-p or more Signal-to-Noise Ratio...50 dB or more Monitor Out Frequency Response...5 Hz to 10 MHz, 3 dB

GENERAL

Power Supply [U.K. and Australia models].AC 240V, 50 Hz [Europe model]..AC 230V, 50 Hz [General model].AC 110/120/220/240V, 50/60 Hz Power Consumption...300W AC Outlets 2 SWITCHED OUTLETS [Europe and General models]..120W max. total 1 SWITCHED OUTLET [U.K. and Australia models].120W max. total Dimensions (W x H x D)..435 x 146 x 386 mm...(17-1/8 x 5-3/4 x 15-3/16) Weight..10 kg (22 lbs. 0 oz.) Accessories.Remote control transmitter Batteries Specifications are subject to change without notice.
YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA
ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, VSTRA FRLUNDA, SWEDEN MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA

VS73740

 

Tags

350Z-2006 Sensor RTS 32LG3500 Fazer SC-PM29 LE19C350d1W SP100 IN 1 ML-2150 SRM5100 Array BG GA-8IK1100 CDX-GT39UE PC5502Z2 RX-5062S S-102 Makita 9031 AV-14A10 ZWT385 Travelmate 2300 ST600 Xtc 1400 VGN-AR78E S75398KG38 123HD65X Iriver E-50 210TE PMX-01 VDR-D150GC LE40C652l2W MC1761EM Lcd TV BMG900ESL23 PXA-H600 Primavera Multimix8USB Review LN-T4069F GR-D225EK UX-238 EOS 30D IC-775DSP 1640Z Voip3212S Sbcvl1405 ESP7200 DTZ-2100D Netdefend Eureka 4380 SP6000 Watch C50 Moulinex DFC6 SX-KN1600 Combitrim GR-403SVF Mgbsx1 Fostex A-2 Marvel NW-E505 Edition U1524 Fitness 127 X SDM-HS75 CF-10 S4-2002 DTR220-24 KDL-40EX501 RX-V890 KDC-C504 CDX-GT45IP Enmvg V3 40 RH7823W HBH-200 DS6211 42PQV Prix 3 AWL-500 1 1 TEW-431BRP FR-200 HMD-A230 DVR-SK12D Alarm Dyson DC22 TSS-15 1200NF OT-980 SL-1210M3D 6620LDT MHC-GX450 WF8502NGW GA-8IG Korg A4 Estate MHS-PM1 CDA-9847R DNX190H ADV86 Scanner

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101