YAMAHA PROPELLERS

PLASTIC/ALUMINIUM SERIES
Although plastic/aluminium is the lowest-cost option for most engines, these Yamaha propellers provide better performance than other plastic/aluminium propellers because of their precise matching to Yamaha engines. Their light weight and lower costs also makes the aluminium propellers an excellent choice as a spare propeller, in case striking an underwater object accidentally damages the primary propeller.

PLASTIC

Outboard Engine Model M11 M12/M14/M16/M18 M20/M26 M32 2A/B Diam. 7 1/4 Diameter 7 1/1/1/4 F2.5A/3A (MALTA) 7 1/1/1/1/1/4 4A/B 5B/C (--91) 7 1/1/1/1/1/1/4 4A 5C (92--) F4A 6A/B/8A/B 7 1/1/1/1/4 6C/D/8C F6A/B/F8C 8 1/1/1/1/1/2 9.9C/D/F 15C,D,F F8B/F9.9B F9.9C/F15A/F15C/F20B 9.9B/15B 9 1/1/1/1/1/1/1/1/1/1/4 9.5A/12A/15A 20A/B/25A 9 1/1/1/1/1/1/1/1/1/4 20C/D 25B/D/J/N/V 25A 30A/D/G/H F20A/F25A 9 7/7/7/7/7/7/7/7/8 FT25B 25Q 40B/C/D/F/H/Q/V/X/Y 40A/B F30A/F40A/B/C/F45A F50A/F/F60A/C 50C/D/G/H PRO50/C 55A/B 12 1/1/1/3/5/3/1/1/1/11 1/3/5/3/3/5/3/1/Pitch 4 Pitch 4 1/5 1/5 1/7 1/1/6 1/7 1/8 1/1/5 3/1/7 1/9 1/1/1/8 1/1/1/3/9 3/10 1/1/1/1/10 1/1/15 Type A Type A A A BS BS BS BS BS B B B B B B BA BA BA C C C C C C C N N N N N J J J J J J J J J J D D D D D D D D D F F F F F F F F G G G G G G G G G G G G G G G G G G G Part Number MKY-00137-81-21 MKY-00137-81-26 MKY-00137-81-22 MKY-00137-81-29 6A1-45943-00-00 Part Number 646-45944-01-EL 6F8-45942-01-EL 646-45942-01-EL 6L5-45949-00-EL 6L5-45952-00-EL 6L5-45943-00-EL 6L5-45945-00-EL 6L5-45947-00-EL 644-45941-01-EL 654-45941-01-EL 6E0-45943-00-EL 654-45943-01-EL 6E0-45941-00-EL 6E0-45947-00-EL 6E0-45949-00-EL 6E0-45943-01-EL 6E0-45941-01-EL 655-45949-00-EL 655-45947-01-EL 655-45945-00-EL 647-45943-00-EL 655-45943-00-EL 647-45947-00-EL 647-45941-00-EL 6G1-45947-00-EL 6G1-45943-00-EL 6G1-45952-00-EL 6G1-45941-00-EL 6G1-45954-00-EL 683-45949-00-EL 683-45947-00-EL 63V-45945-10-EL 63V-45947-00-EL 683-45945-00-EL 683-45952-00-EL 63V-45952-10-EL 683-45943-00-EL 63V-45943-10-EL 683-45941-00-EL 650-45945-60-EL 626-45945-01-EL 626-45945-60-EL 650-45943-60-EL 650-45941-60-EL 626-45949-60-EL 651-45947-60-EL 656-45943-61-EL 648-45943-61-EL 664-45943-01-EL 664-45941-01-EL 62C-45941-00-EL 664-45945-00-EL 664-45947-01-EL 664-45954-01-EL 664-45949-02-EL 664-45952-00-EL 68U-45941-00-EL 63D-45941-00-EL 663-45956-01-EL 663-45954-01-EL 69W-45947-00-EL 663-45952-02-EL 69W-45945-00-EL 69W-45951-00-EL 663-45958-01-EL 69W-45943-00-EL 69W-45A45-00-00 NEW 69W-45A52-00-00 NEW 69W-45A47-00-00 NEW 663-45949-01-EL 663-45941-01-EL 6H5-45952-00-EL With lip cup 6H5-45945-00-EL With lip cup 6H5-45958-00-EL With lip cup 6H5-45943-00-EL With lip cup Remarks Outboard Engine Model FT60B/D 60F/70B 75A/C 80A/85A/90A/100A 115A/B/C 130A/B/140A/B/C PRO 75/C/100A FT50B/C/G, F80A/B/F100A/D/F115A 150A/C/F 200A/B/F/G 220A 225A/B/C/D 250A/B PRO V200 HPDI150/ HPDI175 HPDI200 F150A F200A/F225A HPDI250/HPDI300 Diameter 5/1/1/12 5/1/1/13 3/1/2 Pitch 23 Type K K K K K K K K M M M M M Part Number 6E5-45954-00-EL 6E5-45949-00-EL 6E5-45947-00-EL 6E5-45945-01-EL 6E5-45941-00-EL 6E5-45943-00-EL 6E5-45952-00-EL 6E5-45956-00-EL 6G5-45941-00-98 6G5-45947-01-98 6G5-45945-01-98 6G5-45943-01-98 6G5-45949-00-98 Remarks Remarks

ALUMINIUM

Outboard Engine Model 2A/B

Hyo1.fm Page 1 Tuesday, February 14, 2006 9:33 AM

SPEAKER SYSTEM

SUBWOOFER

CW115V/CW118V/CW218V

ESPAOL

Owners Manual

Thank you for choosing the YAMAHA speaker system. In order to take maximum advantage of the speakers features and ensure maximum performance and longevity, please read this manual carefully before using the speaker system. Keep the manual in a safe place for future reference.

Manual de instruccines

Gracias por escoger el sistema de altavoces YAMAHA. A n de aprovechar al mximo las caractersticas de los altavoces y obtener un rendimiento y durabilidad ptimos, lea atentamente este manual antes de utilizar el sistema. Guarde este manual en un lugar seguro para futuras consultas.

Bedienungsanleitung

Wir beglckwnschen Sie zum Kauf dieses YAMAHA -Lautsprechersystems. Damit Sie die Ausstattungen dieses Lautsprechersystems optimal nutzen knnen, und um maximale Leistung und Lebensdauer sicherzustellen, lesen Sie bitte vor der Inbetriebnahme diese Anleitung sorgfltig durch. Bitte bewahren Sie diese Bedienungsanleitung gut auf, um bei Bedarf darauf zurckgreifen zu knnen.

Mode demploi

Nous vous remercions davoir achet les enceintes YAMAHA. Pour obtenir les performances optimales de vos enceintes et garantir une longvit maximale, lisez attentivement ce mode demploi avant dutiliser les enceintes. Conservez-le en lieu sr pour pouvoir vous y rfrer ultrieurement.

FRANAIS

C112V/C115V/C215V CM10V/CM12V/CM15V C112VA/C115VA

DEUTSCH

ENGLISH

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING
* Please keep this manual in a safe place for future reference.

WARNING

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages, re or other hazards. These precautions include, but are not limited to, the following:

Do not open

Do not open the device or attempt to disassemble the internal parts or modify them in any way. The device contains no user-serviceable parts. If it should appear to be malfunctioning, discontinue use immediately and have it inspected by qualied Yamaha service personnel.

Water warning

Do not expose the device to rain, use it near water or in damp or wet conditions, or place containers on it containing liquids which might spill into any openings.

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the device or other property. These precautions include, but are not limited to, the following:

Location

If you use a stand, check the stands specications and make sure that it is sturdy enough to support the weight of the speaker. You may need to limit the number of people around the placed stand, in order to avoid toppling the device or causing damage to the internal components. If you use the TS-80 and TS-90 speaker stands manufactured by Ultimate Systems (sold separately) to support the C112V/C115V/CM10V/CM12V/CM15V speaker models, be sure to keep the following cautions. Use the speaker stands with their legs fully opened. Mount only one speaker on each speaker stand. Tighten fastening screws securely. Remove the speakers from the stands before moving the stands or adjusting their height. Add weight such as sand bags around the stand legs to prevent them from falling over. Use the stand at a maximum height of 140cm (55"). If you use a metal socket of the CW115V/CW118V subwoofer to allow mounting of a satellite speaker, use a pole shorter than 90cm (35.4") with an outer diameter of 35mm (1-3/8"). When transporting or moving the device, always use two or more people. Before moving the device, remove all connected cables. Do not use the speakers handles for suspended installation. Doing so can result in damage or injury. Do not expose the device to excessive dust or vibrations, or extreme cold or heat (such as in direct sunlight, near a heater) to prevent the possibility of panel disguration or damage to the internal components. Do not place the device in an unstable position where it might accidentally fall over.

Connections

Before connecting the device to other devices, turn off the power for all devices. Before turning the power on or off for all devices, set all volume levels to minimum. Use only speaker cables for connecting speakers to the speaker jacks. Use of other types of cables may result in re. Be sure to observe the ampliers rated load impedance (see page 4), particularly when connecting speakers in parallel. Connecting an impedance load outside the ampliers rated range can damage the amplier.

Handling caution

Always turn AC power to the power amplier on last in any audio system to avoid speaker damage. When turning power off, the power amplier should be turned off rst for the same reason. Do not use the device for a long period of time at a high or uncomfortable volume level, since this can cause permanent hearing loss. If you experience any hearing loss or ringing in the ears, consult a physician. Do not operate the device if the sound is distorting. Prolonged use in this condition could cause overheating and result in re.
This product, when used in combination with amplication and/or additional loudspeakers, may be capable of producing sound levels that could cause permanent hearing loss. DO NOT operate at high volume levels or at a level that is uncomfortable. If you experience any discomfort or ringing in the ears, or suspect an hearing loss, you should consult an audiologist.
All full-range loudspeakers are tted with a self-resetting poly switch that protects the high-frequency driver from damage caused by excessive power. If a loudspeaker cabinet loses high-frequency output, immediately remove power from the unit and wait for two to three minutes. They should allow the poly switch to reset. Reapply power and check the performance of the high-frequency driver before continuing with the power reduced to a level that does not cause the poly switch to interrupt the signal. On the CW115V/CW118V/CW218V subwoofer, the Poly Switch protects the woofer and a similar routine should be followed if its output is lost. In any system using two or more speakers, be sure to match the connection polarities of all speakers to the amplier(s) e.g. always connect + to + and - to -. If the polarities are not properly matched the speakers will be driven out of phase and the sound will suffer. Use only Neutrik NL4FC plugs for connecting Speakon connectors. Yamaha cannot be held responsible for damage caused by improper use or modications to the device. * Illustrations in this manual are for explanatory purposes only, and may not match the actual appearance of the product during operation. * Company names and product names used in this Owners Manual are trademarks or registered trademarks of their respective owners.

To protect your speakers

When choosing a power amplier to use with your speakers, make sure that its power output matches the speakers power capacity (refer to the Specications on page 7). Even if the ampliers power output is lower than the speakers PGM (program) power capacity, the speakers may be damaged when clipping of a high input signal occurs. The following may cause damage to speakers: Feedback caused when using a microphone. Continuous high sound pressure level produced by electronic instruments. Continuous high-power output distorted signals. Popping noises caused by turning on equipment, or by connecting or disconnecting system components while the amplier is turned on.

Poly Switch

Connecting the Speakers

I Phone Plug Wiring

Phone plugs for connection to the phone jack inputs should be wired as shown to the right. Be sure to use proper speaker cable NOT shielded instrument or line cable for all speaker connections.

HOT(+) COLD()

I Neutrik Speakon NL4FC Plug Wiring
If you will be using the Neutrik connectors for speaker input, wire the plugs as shown to the right. Be sure to use proper speaker cable NOT shielded instrument or line cable for all speaker connections.
2 (NO USE) 1+ : HOT(+) 1 :COLD () Neutrik NL4FC connector 2+ (NO USE)

I Full-range Connection

Each speaker (except for the C112VA/ C115VA) features four input/parallel connectorstwo 1/4 phone jacks and two Neutrik Speakon NL4MP connectors. Use either a phone jack or a Speakon connector to receive input from your sound system/power amplier. One of the spare connectors can be used to parallel-connect an additional speaker (keeping in mind the impedance considerations mentioned below).

MIXING CONSOLE L

GRAPHIC EQUALIZER L

POWER AMPLIFIER L

SPEAKER SYSTEMS R R R

SPEAKER SYSTEMS

Impedance Considerations
When connecting speakers in parallel be sure to check the rated load impedance of the power amplier. Most power ampliers are capable of safely driving speakers with minimum impedance of 8 ohms or 4 ohms. A pair of parallel-connected 8-ohm speakers have a total impedance of 4 ohms. Two 8-ohm speakers can safely be paralleled on one output. 4-ohm speakers, however, should not be parallel-connected with other speakers. These models can be connected in parallel, however, if you are using a power amplier that can safely drive load impedances of 2 ohms or lower. Check your speaker impedance on page 7.

Subwoofers and the P-Series Power Ampliers
ENGLISH Adding subwoofers to speaker systems like the one shown in the diagram can provide superior dynamic range and overall sound quality. After inputting the line-level audio from the preamplier or mixing console into the Yamaha P-series power ampliers (P7000S/P5000S/P3500S/P2500S), the separate frequency bands are outputted from the ampliers.

MIXING CONSOLE

TWO-CHANNEL GRAPHIC EQUALIZER
P-SERIES POWER AMPLIFIERS A A LOW CUT FREQUENCY=90Hz B B SUBWOOFER

PARALLEL

A PARALLEL
A LOW CUT FREQUENCY=90Hz SPEAKER SYSTEM

B SUBWOOFER

P-SERIES POWER AMPLIFIERS
Suspended and Bracket Installation
Consult an installation expert to arrange for installation or construction work. Choose suspension wire, an installation location, and mounting hardware that are strong enough to support the weight of the speaker. Some ttings may deteriorate over extended periods of time due to wear or corrosion. For safety the installation should be checked thoroughly at regular intervals.
Yamaha cannot be held responsible for damage or injury caused by insufcient strength of the support structure or improper installation.

I Suspended Installation

The C112VA and C115VA can be used in suspended ying rigs by using an appropriate suspension wire. 1. Replace the bolts with the supplied eyebolts (3/8") as shown in the diagram, and then suspend the speaker using an appropriate wire.

I Bracket Installation

The C112VA has bracket-mounting screws on the top, bottom, and sides of the speaker enclosure. The C112VA can be mounted on a wall or ceiling using the optional brackets listed below.
Bracket Wall bracket Ceiling bracket Baton bracket Model BWS251-300, BWS251-400 BCS251 BBS251
Screws (W5/16") Bolts Bolts Eyebolts Eyebolts
Use only the supplied eyebolts. Use two or more eyebolts for suspended installation. Always use the eyebolts marked. Do not suspend a speaker from another suspended speaker.
2. The speaker angle can be adjusted for optimum coverage by adjusting the lengths of the suspension wires, but the downward tilt angle must be less than 45 degrees, as shown in the diagram.
Use only the specied screws (W5/16") to attach the bracket to the speaker. The mounting screws are installed on the speaker when it leaves the factory. Refer to the instruction manual supplied with your bracket for installation details.

Maximum 45 Degrees

Specications
Model Enclosure Speaker Unit Frequency Response Power Capacity Nominal Impedance Sensitivity Nominal Dispersion Crossover Frequency Input Connectors Dimensions (W H D) Weight Included Accessories Horizontal Vertical NOISE* PGM MAX LF HF 10" cone 1" V.C.driver 70Hz-20kHz 125W 250W 500W 12" cone 2" V.C.driver 60Hz-16kHz 175W 350W 700W 55Hz-16kHz 250W 500W 1000W CM10V C112V C112VA CM12V C115V Bass Reex Type C115VA 15" cone CM15V C215V 15" cone 2

42Hz-16kHz 500W 1000W 2000W 96dB SPL 99dB SPL 97dB SPL (1W, 1m) 99dB SPL (1W, 1m) (1W, 1m) (1W, 1m) 1.8kHz 2kHz 1.7kHz 1.5kHz 1/4" Phone Jack 2, Barrier Strip 1/4" Phone Jack 2, Barrier Strip 1/4" Phone Jack 2, Neutrik Speakon NL4MP 2 Terminal Neutrik Speakon NL4MP 2 Terminal Neutrik Speakon NL4MP 1163 273mm 329mm 329mm 339mm 373mm 373mm 339mm 593mm 13.3Kg 21.3Kg 21.8Kg 21.8Kg 30.3Kg 29.9Kg 28.8Kg 47.5Kg Eyebolt Eyebolt (3/8") 4 (3/8") 4
C112V/C112VA/C115V/C115VA

CM10V/CM12V/CM15V

Model Enclosure Speaker Unit Frequency Response NOISE* Power Capacity PGM MAX Nominal Impedance Sensitivity Recommended Crossover Frequency Input Connectors Dimensions (W H D) Weight *: EIA RS-426

CW115V

CW118V Bass Reex Type
CW218V 18" cone 2 30Hz-2kHz 600W 1200W 2400W 4
15" cone 35Hz-2kHz 250W 500W 1000W 8 95dB SPL (1W, 1m)

18" cone

300W 600W 1200W
96dB SPL (1W, 1m) 90Hz, 12dB/oct.

98dB SPL (1W, 1m)

1/4" Phone Jack 2, Neutrik Speakon NL4MP 607 528mm 28Kg 637mm 37.2Kg 655mm 64.7Kg
Specications and descriptions in this owners manual are for information purposes only. Yamaha Corp. reserves the right to change or modify products or specications at any time without prior notice. Since specications, equipment or options may not be the same in every locale, please check with your Yamaha dealer.

CW115V/CW118V

CW218V

Unit: mm

ClubV.book Page 33 Tuesday, February 14, 2006 9:16 AM
Technical Data/Kennlinien/Donnes techniques/Datos tcnicos
Frequency Response/Impedance

CM10V

110 100

C115V/CM15V/C115VA

RESPONSE(dB)

100 1k 10k 8 4

FREQUENCY(Hz)

C112V/CM12V/C112VA

C215V

1k 10k 8 4

100 1k 10k

CW115V

CW118V

CW218V

1k 10k 4 2
ClubV.book Page 34 Tuesday, February 14, 2006 9:16 AM

Horizontal Directivity

50 270

500Hz 1kHz 2kHz

4kHz 8kHz 16kHz
ClubV.book Page 35 Tuesday, February 14, 2006 9:16 AM

Vertical Directivity

For details of products, please contact your nearest Yamaha representative or the authorized distributor listed below. Pour plus de dtails sur les produits, veuillez-vous adresser Yamaha ou au distributeur le plus proche de vous gurant dans la liste suivante.
Die Einzelheiten zu Produkten sind bei Ihrer unten aufgefhrten Niederlassung und bei Yamaha Vertragshndlern in den jeweiligen Bestimmungslndern erhltlich. Para detalles sobre productos, contacte su tienda Yamaha ms cercana o el distribuidor autorizado que se lista debajo.

THAILAND

Siam Music Yamaha Co., Ltd. 891/1 Siam Motors Building, 15-16 oor Rama 1 road, Wangmai, Pathumwan Bangkok 10330, Thailand Tel: 02-215-2626

NORWAY

Norsk lial av Yamaha Scandinavia AB Grini Nringspark 1, N-1345 sters, Norway Tel: 77 70

EUROPE

THE UNITED KINGDOM
Yamaha Music U.K. Ltd. Sherbourne Drive, Tilbrook, Milton Keynes, MK7 8BL, England Tel: 01908-366700

RUSSIA

Yamaha Music (Russia) Ofce 4015, entrance 2, 21/5 Kuznetskii Most street, Moscow, 107996, Russia Tel: 0660

OTHER ASIAN COUNTRIES

Yamaha Corporation, Asia-Pacic Music Marketing Group Nakazawa-cho 10-1, Naka-ku, Hamamatsu, Japan 430-8650 Tel: +81-53-460-2317

OTHER EUROPEAN COUNTRIES

Yamaha Music Central Europe GmbH Siemensstrae 22-34, 25462 Rellingen, Germany Tel: +49-4101-3030

GERMANY

Yamaha Music Central Europe GmbH Siemensstrae 22-34, 25462 Rellingen, Germany Tel: 04101-3030

OCEANIA

AUSTRALIA
Yamaha Music Australia Pty. Ltd. Level 1, 99 Queensbridge Street, Southbank, Victoria 3006, Australia Tel: 3-9693-5111

AFRICA

Yamaha Corporation, Asia-Pacic Music Marketing Group Nakazawa-cho 10-1, Naka-ku, Hamamatsu, Japan 430-8650 Tel: +81-53-460-2313
SWITZERLAND/LIECHTENSTEIN
Yamaha Music Central Europe GmbH, Branch Switzerland Seefeldstrasse 94, 8008 Zrich, Switzerland Tel: 01-383 3990
COUNTRIES AND TRUST TERRITORIES IN PACIFIC OCEAN

AUSTRIA

Yamaha Music Central Europe GmbH, Branch Austria Schleiergasse 20, A-1100 Wien, Austria Tel: 01-60203900

MIDDLE EAST

TURKEY/CYPRUS
CZECH REPUBLIC/SLOVAKIA/ HUNGARY/SLOVENIA
Yamaha Music Central Europe GmbH, Branch Austria, CEE Department Schleiergasse 20, A-1100 Wien, Austria Tel: 01-602039025

OTHER COUNTRIES

Yamaha Music Gulf FZE LOB 16-513, P.O.Box 17328, Jubel Ali, Dubai, United Arab Emirates Tel: +971-4-881-5868
HEAD OFFICE Yamaha Corporation, Pro Audio & Digital Musical Instrument Division
Nakazawa-cho 10-1, Naka-ku, Hamamatsu, Japan 430-8650 Tel: +81-53-460-2441
Yamaha Pro Audio global web site http://www.yamahaproaudio.com/ Yamaha Manual Library http://www.yamaha.co.jp/manual/ U.R.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation 2003 Yamaha Corporation WK60300 CR C0