Specifications

Here's a few ways you can get connected.

EV-205 (5-string)

Neck Finger Board Finger Board Width Nut Body & Frame Soundboard Tail Piece Chin Rest End Pin Ebony Regular Violin type 5 holes with Master Volume 25mm 45mm 1 1-3/4 Ebony Solid Maple Maple Maple Ebony

EV-204 (4-string)

23.5mm 42mm 15/16 1-5/8
Ebony Regular Violin type 4 holes with Master Volume
Ebony (Regular Violin type) Ebony Light weight gear type Yamaha Strings EV5S Yamaha Strings EV4S

Earphones or Headphones

LINE OUT
Tuning Peg Strings Bridge Pickup Electric Control Jacks Color
Individual sensors for each string Pendulum type bridge transmits string vibration to the individual sensors Change Mode SW, 5ch Mixer & Main Volume Change Mode SW, 4ch Mixer & Main Volume

EV-205/EV-204

Headphones Out, Line Out Amber Pearl Red Cosmic Blue 328mm 4/4 size
Powered Speaker Electric Tuner

Strings Length

All specifications subject to change without notice.

Accessories

Yamaha Strings EV5S/EV4S
The EV-205/204 both use Yamaha original electric violin strings. Designed specifically for use with the EV-205 and EV-204 the strings use a specially designed ball end that acts as a ground to reduce noise. They are also designed to deliver optimum tone balance and tension between the 5th (C string) and the1st through 4th strings. When it's time to replace strings, please choose Yamaha Strings.

Guitar Amp.

Powered Mixer
EV5S EV4S EVS-1E EVS-2A EVS-3D EVS-4G EVS-5C
Violin/Cello/Viola/Bass AUTO TUNER YT-240
Created specifically for string instruments, the YT-240 features special tuning modes for violin, viola, cello and bass. Simply select instruments mode for quick and accurate tuning. A built-in microphone allows tuning of acoustic instruments while electric instruments can connect directly to the tuners input jack.
For details please contact:
KANDO. Inspiring the Heart and Spirit.
This document is printed on chlorine-free (ECF) paper with soy ink.

LST-0147 021010

Printed in Japan

E L E C T R I C

Solid Body Design Incorporates Unique Soundboard
The Electric Violins body is a one-piece design crafted from a block of solid maple. Just as on an electric guitar this design offers a stable yet resonant body upon which massive tone can be created. The soundboard is a single piece of maple extending from the neck down to the chin rest. With the bridge resting on the soundboard it simulates the top of an acoustic violin causing the soundboard and body to resonate to add just the right amount of warmth to the tone. it needs no preamp to boost output level. You can plug directly into a guitar amplifier and get powerful, aggressive and massive electric tone straight away. Its solid sound is perfect for playing a wide variety of styles such as Rock, Jazz, New Age, etc. noise-free and even playing at maximum levels you need not worry about feedback. The body feels comfortable and light with the heel and upper rib where they should be so your left hand knows where its at. The design also allows attachment of most conventional shoulder and chin rests so you can use whatever youre accustomed to. Gear type tuners made of high strength aluminum designed specifically for use on the Electric Violin offer quick and precise tuning eliminating the need for the fine tuner on the E string.

V I O L I N

E V - 5 / E V - 4
Power and expression are two characteristics that contemporary electric violinists search for in an electric violin. Our designers and engineers have provided the EV-205 and EV-204 Electric Violins with the ability to deliver both. Using an amazingly powerful pickup system, newly designed by our engineers, in combination with a one-piece, solid maple body and a unique solid maple soundboard allows these 5 and 4 string Electric Violins to deliver massive tone thats both aggressive and expressive. For the artist it opens up a whole new world of sonic possibilities and expressive freedom with fat tone that is sensitive to the many nuances created by the violinists different bowing and playing techniques. For Jazz, Rock, New Age, and a variety of other styles, in the studio or on the stage, Yamahas Electric Violins are the perfect vehicles for creative musicians.

Built-in Mixer and Two Output Modes
The Electric Violin is fitted with a small onboard mixer, which supplies level controls for the individual sensors and a master level control. The purpose of the mixer is not to boost output but rather to tailor sound output of the strings to fit individual playing styles, playing conditions, sound requirements, rooms, etc. Allowing the instrument to adapt to the players needs gives the player the ability to gain optimum sound from the instrument at anytime. An Output Mode switch provides the player with the option of using the mixer or bypassing it altogether, in which case battery power is not necessary since the massive sound output created by the pickups needs no preamp boost to make it usable.
Choose Either a 5- or 4-String Model
Both 5-string, the EV-205, and 4-string, the EV-204, models are available with the 5-string offering a low C string to provide additional range necessary in todays contemporary music. The 5-string model is designed with a slightly wider neck to accommodate the additional string and make switching to a 5-string instrument as easy as possible. For ideal tone, Yamaha has produced custom 5 and 4 string sets optimized for use with the Electric Violin. Both the EV-205 and EV-204 Electric Violins are available in three great looking colors, Amber, Cosmic Blue and Pearl Red.
An Advanced Pickup System For Massive Sound
The pickup system consists of individual sensors for each string, mounted in a specially designed bridge. Each sensor is housed inside a pendulum upon which the string rests at the bridge. String vibration causes the pendulum to vibrate ever so slightly within the bridge, which creates an extremely large signal, so large in fact that

EV-205 Amber

EV-205 Pearl Red
Expressive Power and Great Playability
Everything comes together to give the Electric Violin a wide dynamic range which makes it an extremely expressive instrument to play. Tone is fat, edgy, aggressive and powerful but you can go from pianissimo to fortissimo with clarity and ease. Response is quick, the sound is clear and changes in bowing are also easily produced. Output is

Other Features

Headphone jack offers on stage monitoring of the Electric Violins direct tone. An independent volume control gives the player control over headphone level without altering the line out level. Volume control mounted on the tailpiece for easy adjustment during performance.

EV-204 Amber

EV-205 Cosmic Blue

EV-204 Cosmic Blue

EV-204 Pearl Red

ELECTRIC VIOLIN

EV-204/EV-205
Owners Manual Congratulations!
Thank you for purchasing the Yamaha Electric Violin. In order to obtain the maximum performance and enjoyment from your Electric Violin, we urge you to read this Owners Manual thoroughly before using the instrument. Please keep this Owners Manual in a safe place for later reference.

Contents

Precautions... 3 Main Body/Accessories.. 4 Nomenclature... 5 Setup... 7
Installing the Bridge... 7 Tuning.... 8 The Shoulder Rest... 8 Changing Strings.. 9
Power Supply... 11 Using the Controls.. 12
About the Controlled Mode.. 12 Using Headphones.. 13 Controlling the Output Volume (Master Volume).. 13
Example Connections.. 14 Specifications.. 15
2-EV204/205_E/R06.4.3, 2:04 PM

English

FCC INFORMATION (U.S.A.)
1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. electronic devices. Compliance with FCC regulations does not guarantee that interference will not occur in all installations. If this product is found to be the source of interference, which can be determined by turning the unit OFF and ON, please try to eliminate the problem by using one of the following measures: Relocate either this product or the device that is being affected by the interference. Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s. In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to coaxial type cable. If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type of product. If you cannot locate the appropriate retailer, please contact Yamaha Corporation of America, Electronic Service Division, 6600 Orangethorpe Ave, Buena Park, CA 90620 The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries.

2. IMPORTANT:

When connecting this product to accessories and/or another product use only high-quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC authorization to use this product in the USA.

3. NOTE:

This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class B digital devices. Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential environment will not result in harmful interference with other electronic devices. This equipment generates/uses radio frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference harmful to the operation of other

SPECIAL MESSAGE SECTION

This product utilizes batteries or an external power supply (adaptor). DO NOT connect this product to any power supply or adaptor other than one described in the manual, on the name plate, or specifically recommended by Yamaha. This product should be used only with the components supplied or; a cart, rack, or stand that is recommended by Yamaha. If a cart, etc., is used, please observe all safety markings and instructions that accompany the accessory product.

Battery Notice: This product MAY contain a small non-rechargeable
battery which (if applicable) is soldered in place. The average life span of this type of battery is approximately five years. When replacement becomes necessary, contact a qualified service representative to perform the replacement. This product may also use household type batteries. Some of these may be rechargeable. Make sure that the battery being charged is a rechargeable type and that the charger is intended for the battery being charged. When installing batteries, do not mix old batteries with new, or with batteries of a different type. Batteries MUST be installed correctly. Mismatches or incorrect installation may result in overheating and battery case rupture.
SPECIFICATIONS SUBJECT TO CHANGE: The information
contained in this manual is believed to be correct at the time of printing. However, Yamaha reserves the right to change or modify any of the specifications without notice or obligation to update existing units.
Do not attempt to service this product beyond that described in the usermaintenance instructions. All other servicing should be referred to qualified service personnel. This product, either alone or in combination with an amplifier and headphones or speaker/s, may be capable of producing sound levels that could cause permanent hearing loss. DO NOT operate for long periods of time at a high volume level or at a level that is uncomfortable. If you experience any hearing loss or ringing in the ears, you should consult an audiologist. IMPORTANT: The louder the sound, the shorter the time period before damage occurs.
Warning: Do not attempt to disassemble or incinerate any battery. Keep all
batteries away from children. Dispose of used batteries promptly and as regulated by the laws in your area. Note: Check with any retailer of household type batteries in your area for battery disposal information.
Disposal Notice: Should this product become damaged beyond repair, or
for some reason its useful life is considered to be at an end, please observe all local, state, and federal regulations that relate to the disposal of products that contain lead, batteries, plastics, etc. If your dealer is unable to assist you, please contact Yamaha directly.
NAMEPLATE LOCATION: The nameplate is located on the bottom of the NOTICE: Service charges incurred due to a lack of knowledge relating to

how a function or effect works (when the unit is operating as designed) are not covered by the manufacturers warranty, and are therefore the owners responsibility. Please study this manual carefully and consult your dealer before requesting service. product. The model number, serial number, power requirements, etc., are located on this plate. You should record the model number, serial number, and the date of purchase in the spaces provided below and retain this manual as a permanent record of your purchase.

Model Purchase Date

Serial No.
ENVIRONMENTAL ISSUES: Yamaha strives to produce products that
are both user safe and environmentally friendly. We sincerely believe that our products and the production methods used to produce them meet these goals. In keeping with both the letter and the spirit of the law, we want you to be aware of the following:
PLEASE KEEP THIS MANUAL CANADA
THIS DIGITAL APPARATUS DOES NOT EXCEED THE CLASS B LIMITS FOR RADIO NOISE EMISSIONS FROM DIGITAL APPARATUS SET OUT IN THE RADIO INTERFERENCE REGULATION OF THE CANADIAN DEPARTMENT OF COMMUNICATIONS. LE PRESENT APPAREIL NUMERIQUE NEMET PAS DE BRUITS RADIOELECTRIQUES DEPASSANT LES LIMITES APPLICABLES AUX APPAREILS NUMERIQUES DE LA CLASSE B PRESCRITES DANS LE REGLEMENT SUR LE BROUILLAGE RADIOELECTRIQUE EDICTE PAR LE MINISTERE DES COMMUNICATIONS DU CANADA.
This applies only to products distributed by Yamaha Canada Music Ltd. Ceci ne sapplique quaux produits distribus par Yamaha Canada Musique Lte.
Your Electric Violin will give you years of reliable service if you follow the simple rules given below: Location
Do not expose it to the following conditions to avoid deformation, discoloration, or more serious damage. Direct sunlight (e.g. near a window). High temperatures (e.g. near a heat source, outside, or in a car during the daytime). Excessive humidity. Excessive dust. Strong vibration.
Turn Power OFF When Making Connections
To avoid damage to the Electric Violin and other devices to which it is connected (a sound system, for example), turn the power switches of all related devices OFF prior to connecting or disconnecting audio cables.

Handling and Transport

Never apply excessive force to the controls, connectors or other parts. Always unplug cables by gripping the plug firmly, not by pulling on the cable. Disconnect all cables before moving the unit. Physical shocks caused by dropping, bumping, or placing heavy objects on the unit can result in scratches and more serious damage.

Cleaning

Clean the cabinet and panel with a dry soft cloth. A slightly damp cloth may be used to remove stubborn grime and dirt. Never use cleaners such as alcohol or thinner. Avoid placing vinyl objects on top of the unit (vinyl can stick to and discolor the surface).
YAMAHA is not responsible for damage caused by improper handling or operation.

Main Body/Accessories

After opening the packaging, please check that all the parts listed below are included.
Violin 6F22 (S-006P) 9V battery x 1

Owners Manual

* The EV-205 is the illustration.

Nomenclature

Front

Tuning peg

Fingerboard 5th string (C)

* EV-205 Only

4th string (G) 3rd string (D)
2nd string (A) 1st string (E)

Sound Board Body Frame

Bridge Chin rest
Tailpiece Tailpiece Wire End pin Master Volume * The EV-205 is the illustration.

Controls

PHONES VOLUME LINE OUT Jack

PHONES Jack

VOLUME CONTROLLED

PHONES

LINE OUT DIRECT
MODE Select Switch CONTROLLED/DIRECT (Active/Passive)
Pickup Level Controls (1-5, Main)

6F22 (S-006P) 9V battery

Battery Cover

Installing the Bridge

The lower side of the bridge supports the 1st string (E), the higher side supports the 4th string (G). Make sure the bridge is placed properly. Make sure that the tailpiece side of the bridge is standing vertically in relation to the violins body. If the bridge is leaning to one side, loosen the strings and gently adjust the bridge with both hands. Also, make sure that each string passes over its corresponding notch in the bridge.
* Playing the violin with a bridge that leans may result in damage to the bridge or a deterioration in sound quality. 5th string

[EV-204]

G 4th string Slit D A E 1st string

[EV-205]

C G D A E Slit 1st string
[Looking from the tailpiece]

Correct Bad Bad

Vertical

Body Tailpiece

[Bridge is placed vertically]

Tuning

The strings are tuned to the following pitches. The 1st string is tuned to E, the 2nd string to A, the 3rd string to D, the 4th string to G and the 5th string to C (EV-205). Use a piano, tuning fork, tuner, etc. and adjust the pitch of each string using the pegs. After tuning is complete, make sure that the tailpiece side of the bridge is still properly aligned. If the bridge is leaning in either direction, slightly loosen the strings and carefully re-align the bridge using both hands.
2nd string (A) 1st string (E) 3rd string (D) 4th string (G) [EV-205]
3rd string (D) 4th string (G) 5th string (C)

The Shoulder Rest

Most standard size (4/4) violin rests can be attached to the body of the Electric Violin.

Shoulder rest

Natural wood is used for some parts in this instrument. Depending upon the manner in, or the circumstance under which the instrument is used, your fingers, body or clothes may become blackened or the wood parts may change color. If your fingers or body become blackened, it is not harmful but please wash with water thoroughly. The maker takes no responsibility for any discoloration of clothes or wood parts.

Changing Strings

As the strings get old, sound quality will gradually degrade, and the instrument will become difficult to tune. Change the strings as soon as you think they are getting old. When changing strings, use Yamaha strings designed especially for the instrument. These strings are specially designed to eliminate electric noise. Always change the strings one at a time, even if all strings must be changed.
The end of the strings are sharp and can cut fingers. Use caution when changing strings. When changing or adjusting strings, do not put your face close to the instrument. The string may suddenly break resulting in eye or other unexpected injuries.
Attach the string to the tailpiece. From above the tailpiece, insert the ball end of the string into the hole on the tailpiece and hook the ball end into the notch of the string hole. At this time, make sure the strings ball end comes in contact with the shielding sheet attached to the underside of the tailpiece.
Ball end String Tailpiece

Ball end

shielding sheet
[Looking from the underside of the tailpiece]

Caution

Make sure that the tailpiece wire is properly positioned around the endpin.

Tailpiece

Tailpiece wire Endpin
Insert the string into the hole on the peg and wind the string onto the peg. Wind the 1st (E) and 2nd (A) strings to the left of the hole as shown in the illustration on the right. Wind the 3rd (D), 4th (G) and 5th- (C) strings to the right.
The string wrapped two or three times around the peg makes the most suitable condition for tuning the violin. Too many or too few wraps may result in inaccurate tuning or noise while playing.
3rd (D), 4th (G) and 5th (C) strings
1st (E) and 2nd (A) strings

2nd string (A) 3rd string (D) 1st string (E) 4th string (G) Rotate the tuning peg as shown
Make sure that the strings do not pull on the bridge causing it to over toward the fingerboard. Also, make sure that the strings pass over their corresponding notch in the top of the bridge. (Make sure that the tailpiece side of the bridge is standing vertical in relation to the violin body.) If the 1st (E) string has a protective tube on it, slide this tube down onto the thicker, ball end of the string (wound with thread) so it does not cause noise and remains out of the way.
1st string (E) protective tube.
Rotate the tuning peg as shown
3rd string (D) 4th string (G) 5th string (C) Rotate the tuning peg as shown 2nd string (A) 1st string (E)
Use a piano, tuning fork, tuner, etc., and adjust the pitch of each string using the tuning pegs.
When the instrument is not going to be used for an extended period of time, loosen the strings until the pitch drops a whole tone.

Power Supply

The Electric Violin requires power when it is operated in the Controlled Mode, or with a pair of headphones. Power is supplied by a single 6F22 (S-006P) 9V battery. Before preparing the power supply, make sure that the Control Sections LINE OUT and PHONES jacks are disconnected.
* The Electric Violin operates without power in the Direct Mode.
Open the battery case, located on the backside of the instrument, by pushing on the tab labeled OPEN and lifting open the battery compartment cover. Connect the supplied 9V battery (6F22:006P) to the battery snap. Take careful note of the polarity markings (+/-) as shown in the illustration. Also, insert the battery at an angle and set so that it is positioned under the hook that holds the battery in place. (Refer to the illustration below.)
* If the battery is inserted with force onto the hook, it may result in damage to the hook, etc.
Place the battery in the battery compartment then close the battery compartment cover.
battery compartment cover
Hook holds battery in place.
Bij dit produkt zijn batterijen geleverd. Wanneer deze leeg zijn, moet u ze niet weggooien maar inleveren als KCA.
When battery power is depleted, volume will be reduced or the sound will become distorted. In that case, please take careful note of the following precautions and replace the battery. For information average battery life, refer to the specifications section on page 15. Always follow the +/ signs when inserting the battery. Improper insertion may result in fire. To prevent possible damage to the unit due to battery leakage and unnecessary power drain, remove the battery from the unit when it is not going to be used for an extended period of time.

Using the Controls

About the Controlled Mode
The instrument can be operated in one of two modes, the Direct (Passive) Mode or Controlled (Active) Mode. Use the Mode Switch q on the Control Section found on the back of the violin to select the mode.
DIRECT (Passive) Mode In this mode, the signal produced by the pickup is sent, directly to the LINE OUT jack delivering the instruments straight, unaltered tone. This mode does not use the preamp therefore battery power is not required (the violin will operate without a battery).
* However, if headphones are used, battery power is required even in the Direct Mode.
CONTROLLED (Active) Mode In this mode, the signals produced by each of the strings pickups are sent to a built-in mixing amplifier before being sent to the LINE OUT jack. This mode offers control over the volume balance between the strings. Battery power is required in this mode.
* Set the Master Volume u to its minimum level before switching modes. (See page 13)
Balancing the volume between the strings (Controlled (Active) Mode)
Remove the battery compartment cover and use the six controllers to balance the volume between the strings. Rotate the controller to the right (clockwise) to increase the volume, or rotate the controller to the left (counterclockwise) to decrease the volume. The controllers default position is shown in the illustration below. * Controllers 1-5 w correspond to the 1st through 5th strings.
* Control #5 does not operate on the EV-204.
* The MAIN control e is used for adjusting the overall volume after mixing the output of strings 1-5.

Using Headphones

Connect a pair of headphones, etc. to the PHONES jack (mini jack) r to monitor sound output. The VOLUME knob t can be used to control the monitor volume.
* The VOLUME t knobs setting does not effect the output of the LINE OUT jack. * When a pair of headphones is used in the DIRECT Mode, battery power is required. * Do not operate the instrument at high volume levels when using earphones (headphones) for any extended period of time. Doing so can lead to irreparable damage to your hearing.
Controlling the Output Volume (Master Volume)
The knob u located on the tailpiece section is the Master Volume, which controls the volume of the output from the LINE OUT jack y. Rotate the knob to the right (clockwise) to increase volume, and rotate the knob to the left (counter-clockwise) to decrease volume. When the knob is fully rotated to the left, its level is 0 (no sound). This knob functions in both Direct and Controlled modes.

Before connecting the Electric Violin to any external devices, make sure that the power of all external devices is turned OFF. Set the volume level of the Electric Violin and any external audio sources to the minimum level before connecting anything. High volume settings could cause damage to the equipment and your hearing. If a connection cord is unplugged while the power is ON, it may result in damage to the equipment. The sudden shock to your ears may be great, so please use with care. Be careful not to step on the cord. The cord may break, equipment may be damaged, and this may cause a substantial shock to your ears. Power is switched on when a plug is connected to one of the jacks. After playing, disconnect the plugs to save energy.

Example Connections

Electric Violin * Both the LINE OUT and PHONES jacks are monaural type.

Stereo Earphones

Guitar Amp
Guitar Preamp, etc. Electronic Tuner

Powered Speaker

P.A. Mixer, Recording Device
When connecting the instrument to external audio equipment, check the jack size and make sure to use a plug size that corresponds to the jack being used, and properly connect the cable to the jack.

Specifications

Neck Fingerboard/Nut Bridge Body Frame Sound Board Chin Rest Tailpiece Tuning Pegs Strings Hard Maple Ebony Single Unit with Pickup Maple Maple Ebony EV-204 : Ebony (4 hole type) EV-205 : Ebony (5 hole type) Gear Type YAMAHA strings for Electric Violin EV4S (strings for 4-string models)/EV5S (strings for 5string models) EVS-1E (1st)/EVS-2A (2nd)/EVS-3D (3rd)/EVS-4G (4th)/EVS-5C (5th) Pickup Connectors/Controls Individual high power output pickup for each string MODE Select Switch (CONTROLLED (Active)/DIRECT (Passive)) MASTER VOLUME LINE OUT (with the power ON and a cable connected) Pickup Level Controls EV-204 : 4ch Mixer & Main Volume EV-205 : 5ch Mixer & Main Volume PHONES PHONES VOLUME 6F22 (S-006P) 9V battery x1 Used with headphones Manganese battery: approximately 6.5 hours Alkaline battery: approximately 15 hours Used without headphones Manganese battery: approximately 8 hours Alkaline battery: approximately 18 hours String Length Dimensions 328 mm (12-15/16) EV-204 :589 (L) x 206 (W) x 126 (H) mm 23-3/16 (L) x 8-1/8 (W) x 4-15/16 (H) EV-205 :601 (L) x 206 (W) x 132 (H) mm 23-11/16 (L) x 8-1/8 (W) x 5-3/16 (H) Weight (with battery) Color 717g (1 lbs. 9 oz.) AMBER, PEARL RED, COSMIC BLUE * Design and specifications are subject to change without notice.
Power Supply Battery Life
(MODE=CONTROLLED, Continuous Use)