Reviews & Opinions
Independent and trusted. Read before buy Yamaha GX-70!

Yamaha GX-70

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Yamaha GX-70, size: 2.0 MB
Related manuals
Yamaha GX-700RDS
Yamaha GX-700
Yamaha GX-707VCD
Yamaha GX-707
Yamaha GX-700VCD

Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Yamaha GX-70Yamaha 5XG-E7968-70-00 SHIM, (1.7T); ATV Motorcycle Snow Mobile Scooter Parts


Details
Brand: Yamaha
Part Number: 5XG-E7968-70-00
UPC: 5XGE79687000


Here you can find all about Yamaha GX-70, for example manual and review. You can also write a review.

 

[ Report abuse or wrong photo | Share your Yamaha GX-70 photo ]

Video review

Improv 021 Op.4168: E 75 Saturn Sling Star

 

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 7. Page 1 of 1. Average Rating:
mak 5:24am on Wednesday, October 27th, 2010 
I called Newegg to tell them what was up. The awesome CS rep read the tracking report and offered a full refund for all 4 (?!?! Out of the box you may get the impression that bass is lacking. Not true. They are very capable of producing strong bass and low frequency effects.
- asaber - 10:03am on Wednesday, September 22nd, 2010 
I did not buy these on newegg, but bought them back in 2003 from a B&M entity, b/c i got employee discount on them. LOUD, wide range of sound. would have given the speaker 5/5 rating (in my situation) if the finish would not have benn so reflective.
haydena 3:58am on Tuesday, August 17th, 2010 
I considder myself very picky when it comes to listening to music on a stero system. I miss-read and foolishly purchased one thinking they were sold as a set so I had a few days to compare while I waited for the other to arrive.
Pragati Wagani 6:51am on Monday, August 16th, 2010 
No more waiting in line at the cinema clean bass / piano glass finish / bi wired heavy / bulky - but essential
jethro10 3:58pm on Wednesday, June 23rd, 2010 
Good speakers for the price.The Yamaha NS-777 : Yamaha Stuns The Addict!Pros:Refined sound with warm characteristics. Great imaging.
Endi 11:03pm on Saturday, April 3rd, 2010 
One word- WOW! These speakers look great and sound even better. Excellent clarity and sound reproduction. Music sounds clean and true. these speakers really sound good myself and my family where really suprised with quality of sound love them.
pilzereiner 7:53pm on Wednesday, March 31st, 2010 
These speakers look and sound great with my home theater sound system and my 58 Attractive Design","Crisp Sound","Easy To Connect".

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

Active Servo Technology

MINI COMPONENT SYSTEM GX70 GX7

DISC CHANGE

OPEN/CLOSE

PTY SEE

PROGRAM

T STAR

Y LA DISP

FRE Q PS/P TY/R

VOLUME

PRESET/TUNINGBAND

A/B/C/D/E

DOWN UP

DOWN USER

MEMORY

TAPE 1/2
REC/PAUSE MODE DOLBY NR NORMAL HIGH DUBBING TIMER REC

PHONES

AUTO/MANL

TIMER HOUR MIN TIME ADJ

PLAYBACK

REC/PLAYBACK

DOLBY B NR
Natural Sound Mini Component System Chane Mini de la srie Natural Sound
OWNERS MANUAL MODE DEMPLOI

SAFETY INSTRUCTIONS

CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
Wall or Ceiling Mounting The unit should be mounted to a wall or ceiling only as recommended by the manufacturer. Ventilation The unit should be situated so that its location or position does not interfere with its proper ventilation. For example, the unit should not be situated on a bed, sofa, rug, or similar surface, that may block the ventilation openings; or placed in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings. Heat The unit should be situated away from heat sources such as radiators, stoves, or other appliances that produce heat.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Explanation of Graphical Symbols
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
10 Power Sources The unit should be connected to a
power supply only of the type described in the operating instructions or as marked on the unit.
11 Power-Cord Protection Power-supply cords should be
routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the unit.
12 Cleaning The unit should be cleaned only as
recommended by the manufacturer.
WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
13 Nonuse Periods The power cord of the unit should be
unplugged from the outlet when left unused for a long period of time.
Read Instructions All the safety and operating instructions should be read before the unit is operated. Retain Instructions The safety and operating instructions should be retained for future reference. Heed Warnings All warnings on the unit and in the operating instructions should be adhered to. Follow Instructions All operating and other instructions should be followed. Water and Moisture The unit should not be used near water for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc. Carts and Stands The unit should be used only with a cart or stand that is recommended by the manufacturer.

SUPPLIED ACCESSORIES ACCESSOIRES FOURNIS
After unpacking, check that the following parts are contained. Aprs le dballage, vrifier que les pices suivantes sont incluses.
Remote control transmitter Tlcommande
A TIME MODE B PROG REPEAT CD C TAPE 9 D EDIT PRESET 0 E 5 5
Speaker cords Cbles denceintes

RANDOM OPEN/CLOSE TUNER

DISC SKIP

PLAY/PAUSE

REC/PAUSE CENTER/REAR /DELAY

MUSIC POWER

SLEEP VOLUME
Batteries (size AA, UM/SUM-3, R6, HP-7) Piles (format AA, UM/SUM-3, R6, HP-7)

Pads Patins

AM (MW/LW) loop antenna Cadre-antenne AM (PO/GO)

Screws Vis

Mounting brackets Supports de montage
Indoor FM antenna Antenne intrieure FM
MUSIC ROCK BLUES RAP JAZZ

89= A B

TAPE 1 STEREO TUNED MEMORY AUTO PTY HOLD
PROGRAM USER NOR TEST PRO LOGIC HALL ARENA PHANTOM TIMER SLEEP 3 STEREO

PRESET

100 350

1K 3.5K 10K

MINI COMPONENT SYSTEM GX70

PTY SEE K

STA RT

P O N M L K J

M T/CT EAT TY/R REP PS/P FREQ DOM

PRESET/TUNING /BAND

MIC MIXING

EJECT EJECT

9 0A B C
Illustration: Europe model Illustration: Modle pour lEurope
MUSIC ROCK PROGRAM ARENA USER

TAPE 1

RANDOM 5 6
TOTAL REM 15 OVER 15 TRACK

EDIT PROG A B S F REP

MNO PQ U

R W X Y Z

DOWN UP UP

PRESET/TUNING/BAND

Illustration: Europe model
Illustration: Modle pour lEurope

R S T U VW

DUBBING REC TAPE NOR HIGH

15 OVER 15

T/CT EAT TY/R REP PS/P FREQ DOM

NX-GX70

Front speakers Enceintes avant
,,,,,,,, ,, , , , , ,, , , , , ,,,,,,,,,,, ,,,,,,,,,,,
Active Servo Technology Active Servo Technology

NX-C70

Center speaker Enceinte centrale

NX-E70

Rear speakers Enceintes arrire
7 B PROG REPEAT CD C TAPE 9 D EDIT PRESET 0 E 5 5

B PROG REPEAT

CD C TAPE

PRESET 9 D EDIT 0 E 5 5

6 A TIME MODE

F E D C B A 0 9

A TIME MODE
REC/PAUSE TAPE 1/2 CENTER/REAR /DELAY

U V W X

REC/PAUSE TAPE 1/2 CENTER/REAR /DELAY PLAY STOP PLAY

PROGRAM USER INPUT

DISC CHANGE OPEN/CLOSE

PTY SEEK

LAY DISP

FREQ PS/PTY

/RT/CT

0.2 m 6 m (8 20)

POWER HIGH CUT VOLUME 40 Hz 140 Hz 0 10

Compact Disc Player

3-Disc Carousel Type CD Changer CD Window to Make CD Playback Visible from Outside PLAYXCHANGE; Disc Changing Capability while Playing Back Another 20-Track Random Access Programmable CD Playback Single Track/Entire Disc/All Disc Repeat Play Random-sequence Play Automatic Synchronized Recording with CD Playback Automatic CD Editing Function for Recording to Tape

Amplifier

Minimum RMS Output Power per Channel Front L, R: 65W + 65W (6) RMS Output Power, 1% THD, 1 kHz Center: Rear: 20W (6) RMS Output Power, 1% THD, 1 kHz 20W (6) RMS Output Power, 1% THD, 1 kHz

Tape Deck

Double Cassette Tape Deck with Automatic Reversing Function 2-Speed Tape Dubbing Dolby B Type Noise Reduction System
Adjustable Display Brightness 2 Microphone Jacks and Mic Mixing Level Control for Karaoke (Australia, China, Singapore and General Models Only) Multi-Use Timer/Sleep Timer Automatic Power-Off Function 4 External Audio/Video Component Connecting Capability SUBWOOFER Output Terminal Which Passes Low Frequencies Only
40 Station Random Access Preset Tuning 40 Station Automatic Preset Tuning Multi-Functions for RDS Broadcast Reception (Europe and U.K. models only)
Sound Field Processor Including Dolby Pro Logic Surround Decoder
2 Programs for Dolby Surround Decoding (DOLBY PRO LOGIC and DOLBY 3 STEREO) 2 Programs for Sound Field Processing (HALL and ARENA) [3-Karaoke Modes for Australia, China, Singapore and General Models Only] Automatic Input Balance Control for Dolby Pro Logic Surround 2 Center Channel Modes (NORMAL/PHANTOM) Test Tone Generator for Easier Speaker Balance Adjustment

Graphic Equalizer

5-Band Adjustable Graphic Equalizer 4 Preset Graphic Equalizer Modes Selectable According to the Music Source (ROCK, BLUES, RAP and JAZZ) 4-Sound Field and 4-Equalizer Control Mode Storing Capability

Dolby Pro Logic Surround

This unit employs a Dolby Pro Logic Surround decoder similar to professional Dolby Stereo decoders used in many movie theaters. By using the Dolby Pro Logic Surround decoder, you can experience the dramatic realism and impact of Dolby Surround movie theater sound in your own home. Dolby Pro Logic employs a four channel five speaker system. The Pro Logic Surround system divides the input signal into four levels: the left and right main channels, the center channel (used for dialog), and the rear surround sound channels (used for sound effects, background noise, and other ambient noises). The center channel allows listeners seated in even less-than-ideal positions to hear the dialog originating from the action on the screen while experiencing good stereo imaging. Dolby Surround is encoded on the sound track of prerecorded video tapes, laser discs, and some TV/cable broadcasts. When you play a source encoded with Dolby Surround on this unit, the Dolby Pro Logic Surround decoder decodes the signal and distributes the surround-sound effects. In addition, this unit features a built-in automatic input balance control. This always assures you the best performance without manual adjustment. Manufactured under license from Dolby Laboratories Licensing Corporation. Dolby, the double-D symbol and Pro Logic are trademarks of Dolby Laboratories Licensing Corporation.

Surround sound Rear L Rear R Note Be sure to use two rear speakers. If you connect one rear speaker only, sound will not be output from the rear speaker.

Speaker placement

Front R Center

Servo Active Technology

Front speakers: Rear speakers:

Front L

Center speaker: TV set Rear R Rear R
In normal position. Behind your listening position, facing slightly inward. Nearly six feet (approx. 1.8 m) up from the floor. Precisely between the front speakers.

Rear L Rear L

s Mounting the rear speakers
Mount the rear speakers on a shelf, rack or on the floor directly, or hang them on the wall.
To mount the rear speakers on a wall
Attach the provided mounting bracket to the rear of the speaker by using the provided screws. Fasten screws into a firm wall or wall support as shown in the diagram, and hang the holes of the mounting bracket on the protruding screws. * The holes are arranged so that the speakers can be mounted in a side long, upright or upside-down way. * Make sure that the screws are caught by a narrow part of the holes securely.

Wall/ wall support

Notes Never attach the bracket to the speaker conversely.
Tapping screw (Available at the hardware store)

No good

Speaker cords should be connected to the speakers terminals after the bracket has attached to the speaker to prevent the speaker cords pressed between the speaker and the bracket.
To hang in a side long way
Hang the speakers so that each of them faces inside as figured left.
WARNING: Each speaker weighs 0.8 kg (1 lbs. 12 oz.). Do not mount them on thin plywood or soft wall surface material, as the screws may come out of the flimsy surface, causing the speakers to fall down and be damaged, or result in personal injury. Do not fasten the speakers to wall with nails, adhesives, or other unsound hardware. Long-term use and vibrations may cause them to fall down. To avoid accidents resulting from tripping over loose speaker cables, fix them to the wall.
SETTING UP THE SPEAKERS s Mounting the center speaker
Place the speaker on top of the TV or on the floor under the TV or inside the TV rack so that it is stabilized. When placing the speaker on top of the TV, to prevent the speaker from falling down, put the provided pads at four points on bottom of the speaker. Notes Do not place the speaker on top of the TV whose area is smaller than the bottom area of the speaker. If placed, the speaker may drop out causing an injury to you. Though this speaker is a magnetic shielding type, there may be some influence on a TV picture depending on the type of TV or the placement of the speaker. In such a case, place the speaker apart from the TV so that there is no influence on TV picture.

CONNECTIONS Never plug the AC supply lead of this system into the AC outlet until all connections are completed.

Connecting speakers

(See figure 8 on page 1 0.)
Connect the provided speakers to the SPEAKERS terminals on the rear of the main unit. Connect the front speakers (NX-GX70) to the FRONT SPEAKERS terminals, the center speaker (NX-C70) to the CENTER SPEAKERS terminals and the rear speakers (NXE70) to the REAR SPEAKERS terminals. Do not connect speakers other than the designated to the respective SPEAKERS terminals. * Use the provided speaker cords for the connections. Normally, use the short cords to connect with the front speakers, and use the long ones to connect with the rear speakers.

How to Connect:

Connect the provided speaker cords to the SPEAKERS terminals properly as shown below. If the connections are faulty, no sound will be heard from the speakers. Make sure that the polarity of the speaker wires is correct, that is the + and markings are observed. If these wires are reversed, the sound will be unnatural and lack bass. As a sure method, connect the wire with a silver line to the + terminals on both main unit and speaker, and connect the wire with no line to the terminals on both of them. Caution Do not let the bare speaker wires touch each other as this could damage the amplifier and/or speakers. Red: positive (+) Black: negative ()
Note on connecting a subwoofer (separate purchase)
You may wish to add a subwoofer to reinforce the bass frequencies. Connect the SUBWOOFER OUT terminal of the main unit to the INPUT terminal of the subwoofer amplifier, and connect the speaker terminals of the subwoofer amplifier to the subwoofer. With some subwoofers, including the Yamaha Active Servo Processing Subwoofer System, the amplifier and subwoofer are in the same unit. * The SUBWOOFER OUT terminal is for output to a monaural amplifier driving a subwoofer. Only frequencies below 200 Hz from the front and center channels are output.
Press up the tab. Insert the bare wire.
[Remove approx. 5mm (1/4) insulation from the speaker wires.] Press down the tab and secure the wire.
Note To connect the speaker wires from the center speaker (NX-C70) to the CENTER SPEAKERS terminals on the main unit, make sure to connect the wire with a silver line to the + terminal and the wire with no line to the terminal.

TOTAL TRACK

Total number of tracks Total playing time
If necessary, change the disc play mode by pressing the disc play MODE selector button on the remote control transmitter watching the display. Single disc play mode: Only a designated disc is played back. All disc play mode: All discs on the disc table are played back sequentially. Lights up only when the all disc play mode is selected.
B PROG REPEAT CD C TAPE 9 D EDIT PRESET 0 E 5 5

5 3, 6

If necessary, select another disc by pressing the DISC SKIP button on the remote control transmitter once or more (so that the corresponding disc tray number is located on the top of the disc indicator). Press the play/pause / button to start playback from track 1. * The indicator will appear and playback will begin. As the playback of each track on the music calendar is finished, that track number will go out.

For easier operation

Pressing the DISC selector button (1, 2 or 3) will select the disc directly, and playback will begin from track 1 automatically.
To interrupt playback Direct operation
When the power is off (in the standby mode), pressing the CD input selector button or the DISC selector (1, 2 or 3) button will turn the power on and start CD playback automatically. When the power is on, even if an input source other than CD player is selected, pressing a DISC selector button or closing the disc table by pushing the front edge of the disc table gently will start playback directly. In this case, if the tape deck is playing back a tape, it will be stopped automatically. * These ways of playback can also be used to close the disc table. If the table is closed in these ways, playback will begin automatically, however, the display will not show the total number of tracks and the total playing time of the disc to be played back.
Press the play/pause / button. * The indicator will flash. Press the play/pause from the same point. / button to resume playback

To stop playback

Press the stop button.
To switch the unit off after use
Turn the unit off by pressing the POWER switch. (The indicators will go off except for the current time display.)

PLAYXCHANGE

During playback, you can open the disc table by pressing the DISC CHANGE button without interrupting playback. However, in this case, pressing the DISC SKIP button or a DISC selector button has no effect. Precautions If TV or radio interference occurs during CD player operation, move the unit away from the TV or radio. Subjecting the unit to shock or vibration can cause mistracking. Playing back some compact discs at high volume can cause mistracking. In this case, listen at lower volume. Do not pull open the disc table forcibly with your hands. Do not push the disc table while it is moving. If the power fails while the table is open, wait until the power supply returns or gently push the table manually to close it. The temperature range for playing back compact discs is recommended to be 5C (41F) 35C (95F).

You can also make use of an automatic preset tuning function. By this function, this unit performs automatic tuning and stores stations with strong signals sequentially. Up to 40 stations are stored automatically in the same way as in the manual preset tuning method on the previous page.
Press the INPUT selector or button once or more so that TUNER appears on the display. Press and hold the tuner MEMORY button for about 2 seconds. * The MEMORY and AUTO indicators will flash.
This unit performs automatic tuning and searches FM and AM (MW and LW for U.K. and Europe models only) stations in that order. Received stations are programmed to A1, A2. A8 sequentially.
When the automatic preset tuning is completed
The display shows the frequencies of the first preset station (stored to A1). Check the contents and the number of preset stations by following the procedure of the section To recall a preset station on the previous page.
Simply follow the procedure of the section To recall a preset station on the previous page.

Memory back-up

The memory back-up circuit prevents the programmed data from being lost even if the AC supply lead is disconnected from the AC outlet or the power is cut due to temporary power failure. If, however, the power is cut for more than one week, the memory may be erased. If so, it can be re-programmed by simply following the Preset tuning steps.
Notes The automatic preset tuning search will be performed through all frequencies until 40 stations are stored. If the number of received stations is less than 40, the search will stop after searching all frequencies. * Since FM stations are searched for first, there may be a case that 40 preset stations are occupied by FM stations only. <U.K. and Europe models only> The unit is originally set so that only RDS stations are searched instead of all FM stations by this operation. (FM stations that employ no RDS network service cannot be programmed.) However, you can change the setting so that the unit can program not only RDS stations but also other FM stations. (Refer to page 30 for details.) With this function, only stations with sufficient signal strength are stored automatically. If the station you want to program is weak in signal strength, tune to it in monaural manually and program it by following the procedure of the section To store stations on the previous page. You can replace a preset station by another FM or AM (MW or LW) station manually by simply following the procedure of the section To store stations on the previous page.

ON (OFF) CT > CLOCK This unit corrects the time of the built-in clock automatically by synchronizing it with the CT data on the RDS station being received. * If you receive an RDS station of some other country, the built-in clock is synchronized with the time setting of the country. * If the built-in clock is not yet set for current time or reset due to a power failure etc., it will be set for the time of the CT data automatically, whether this setting is ON or OFF. ON (OFF) LOCAL > CT If the RDS station being received employs the local time (summer time etc.) data service, its time is displayed in the CT mode. * If the setting of function is ON, the built-in clock is synchronized with the local time data. ON (OFF) A. M. > RDS Only RDS stations are searched instead of all FM stations by the automatic preset tuning operation when the setting is ON. (See page 26 for the operating procedure.) If you switch this function OFF, not only RDS stations but also other FM stations are programmed along with MW and LW stations by the automatic preset tuning operation.
Other functions which make use of RDS data service
This unit has the following functions which make use of RDS data service. These are originally in operation [ON]. However, you can cancel these functions [OFF], if so desired.
To switch these functions on and off
Select the FM band by pressing the PRESET/TUNING/BAND button, confirming it on the display. Press the DISPLAY button to display the current time. Press the FREQ PS/PTY/RT/CT selector button. The title of function ON CT > CLOCK is displayed. Select the title of function whose setting you want to switch by pressing the PTY SEEK MODE button once or more. Switch the function ON or OFF by pressing the PTY SEEK START button, confirming it on the display. Press the FREQ PS/PTY/RT/CT selector button again to restore the frequency display mode. * If the station has PS data, after that, it turns into the PS mode.
Notes Once the setting is changed, it will be stored until it is changed again by the above operation. During the operation, if there is no operation for about 20 seconds, this mode is canceled and turns into the frequency display. If the station has PS data, after that, it turns into the PS mode.

TAPE DECK OPERATION

General information
Do not use C-120 tapes or poor-quality tapes, since they can cause malfunctions. Before loading a tape into the cassette compartment, tighten the tape slack with a pen or pencil. Tapes have removable tabs which prevent accidental recording or erasing from taking place. Removing the tab on the top left protects the side facing you from erasure. Cover the tab holes with adhesive tape to erase or record again. This deck is a Double Cassette Deck with Automatic Reverse Function. Deck 1: Playback only. Deck 2: Playback or recording. This deck features an auto tape selector. Just load the tape, and the tape formula being used will be sensed automatically. This unit can play back metal tapes as well as normal or chrome tapes, however recording cannot be done on metal tapes with good sound quality. When covering erasure prevention tab holes, do not cover the chrome and metal detection holes. Otherwise, the deck will treat tape as normal tape. Do not press the EJECT button during playback or recording.

The reverse MODE selector button can be operated before or during playback, and changes tape playback as follows:

Side A only

Side A Side B (Repeats 8 times) Starts from side A. Side A Side B (Repeats 8 times) Starts from side B. (Side A is not played at the first time.)

Side B only

Press the play button on the remote control transmitter to listen to side A, or the play button for side B. * When using the play button on the front panel: Pressing the button once begins playback in the direction currently selected. Pressing the play button once more changes the tape running direction and begins playback. * The play direction indicator on the display shows the currently selected tape direction.
Play direction indicator Moves slowly in the current tape running direction during playback.

Direct operation

When the power is off (in the standby mode), pressing the TAPE 1/2 input selector button or the play button will turn the power on and start playback of the selected tape automatically. When the power is on, even if an input source other than tape deck is selected, pressing the play button (or the fast wind button) will start playback (or fast winding) directly. Notes When removing the tape, press the stop button, and then open the cassette compartment. Even if you press the TAPE 1/2 input selector button on the front panel or the TAPE 1/2 button on the remote control transmitter during playback, the playback of currently selected tape cannot be changed to the other one though the tape number indicator on the display changes.

Winding the tape

If during playback, first press the stop Next press the fast wind wind the tape. or fast wind

button. button to

Moves rapidly in the direction of the current playback while searching.

Press the stop

button to stop.
Note When the tape is wound to the end, this unit will then function as described below, according to the setting of the reverse MODE selector button. : The tape stops at the end. : When the tape reaches the end, playback automatically starts from the reverse side.
Searching for the beginning of a desired selection

CD synchronized recording
Press the CD input selector button and load the disc to be recorded. Load a tape into the deck 2 cassette compartment. * Wind past the beginning part of the tape on which recording cannot be performed. When recording with the Dolby NR system, press the DOLBY NR button so that B lights up on the display. If not, turn it off. * For details, refer to the Dolby B Type Noise Reduction on page 31. If desired, switch the reverse mode by pressing the reverse MODE selector button.
When the tape is set so that side A faces you, recording will be done as follows automatically according to the selected reverse mode.

Side A Side B

Press the REC/PAUSE button. * REC lights up on the display. Start CD playback by pressing the corresponding DISC selector button, or by pressing the play/pause / button if the disc is already selected. * Before CD playback begins, recording automatically begins on the side of the tape now selected.
To stop recording temporarily

button of the CD player.

Choose the selection to be recorded next by using the or button, and then press the play/pause / button of the CD player to resume recording (or simply press the track number input button on the remote control transmitter).

To stop recording

Press the stop button of the tape deck. (At this time, CD playback will not stop.)
Recording programmed tracks
Programmed tracks from one or more discs can also be recorded in the same way.
Program desired tracks from one or more discs. (Refer to page 20 for the programming procedure.) Follow steps 25 on the previous page. Press the play/pause / button of the CD player.
Notes During CD Synchronized Recording, when more than 4 seconds elapse between tracks, the tape will stop automatically and resume recording when the beginning of the next track is found. The CD Synchronized Recording will function even when the CD player is turned into random play mode.
Returning the tape to the point where the recording started automatically (REC RETURN function) During recording, by only pressing the or button, you can rewind the tape to the point where the recording started automatically. button when the play direction indicator Press the is lit up. button when the play direction indicator Press the is lit up. * This function is available to all recording methods.
Recording CD(s) on both sides of a tape automatically
Press the CD input selector button and load the disc to be recorded. Select the disc by pressing the DISC SKIP button. Load a tape into the deck 2 cassette compartment. When recording with the Dolby NR system, press the DOLBY NR button so that B lights up on the display. If not, turn it off. * For details, refer to the Dolby B Type Noise Reduction on page 31. If the reverse mode is not selected, press the reverse MODE selector button to select it. Press the EDIT button. (EDIT appears on the display.) CD playback and recording starts. Recording is carried out on side A and B of the tape continuously. * If the tape has not rewound to the end, it is rewound to the end rapidly before recording starts. Recording starts from the first part of the tape on which recording can be done. * A (or B) on the display shows the side of the tape on which recording is being carried out. * When the recording on side A finishes while a track is being played back, the sound is automatically faded out, and then the recording stops. The recording on side B starts from the beginning of the same track.

To cancel the timer play setting
After the timer play is finished, press the DISPLAY button to call the current time. While the current time is displayed, press the TIMER button so that TIMER goes out from the display. If it is not canceled, the system will be turned on at the same time every day, so it can be used as an alarm. However, if you are planning to go out at that time, cancel the timer play setting. * Unless the AC supply lead is unplugged or there is a power failure for more than 5 minutes, the time set on the timer will be retained until it is reset.
How to make time setting in the ON TIME or OFF TIME mode
For the hour: Press the HOUR button to change the hour to a higher value. Press and hold to change continuously. To change the hour to a lower value, press the button. For the minute: Use the MIN button and operate it in the same way as you did to change the hour. To change the minute to a lower value, press the button.

DISPLAY

Timer recording (To record a tuner program)
Load a blank tape into the deck 2 cassette compartment. If desired, change the setting of the reverse mode and use the Dolby NR system. Tune in to the station of which program you want to record. Follow step 2 of the Timer play on page 52 and 53. * In step , select TUNER position, and then press the TIMER REC button. (REC will flash on the display.) * In step , set the time when you want to begin the timer recording. * In step , set the time when you want to finish the timer recording.
Press the TIMER button. (The power will be turned off automatically.) * If a normal display mode (the state which had been selected before you began setting the timer recording) is restored before you press the TIMER button, select and follow either of the two methods below. Press the DISPLAY button, and then press the TIMER button. (The power is still on.) Press the POWER switch to turn the power off, and then press the TIMER button. (The power is turned off.)

TIMER REC

To confirm the timer time setting
Press the DISPLAY button.
To cancel the setting of timer recording TUNER
Press the DISPLAY button once or more so that REC flashes on the display. While REC is flashing, press the TIMER REC button. * Unless the AC supply lead is unplugged or there is a power failure for more than 5 minutes, the time set on the timer will be retained until it is reset. Note When the timer recording is finished, the timer setting is automatically canceled to avoid repeating timer recording of the same setting.

Sleep timer operation

This unit can be turned off automatically.

External care

Periodically clean the surfaces of this system, especially the top panel of the main unit to prevent the ventilation holes from being blocked with dust etc. Do not use chemically treated cleaning cloths or other chemicals. (See Precautions.)

TROUBLESHOOTING

If your unit fails to operate normally, check the following points to determine whether the fault can be corrected by the simple measures suggested. If it cannot, or if the fault is not listed in the SYMPTOM column, disconnect the power cord and contact your authorized YAMAHA dealer or service center for help.
SYMPTOM No power even if the POWER switch is pressed. No sound from one speaker No sound from speakers. No sound from the rear speakers. AMPLIFIER/TUNER CAUSE AC supply lead is not plugged in. Loose speaker connections. Internal protection circuit is functioning. One rear speaker connection is loose or bad. The sound output level to the rear speakers is set to minimum. No sound field program is selected. No sound from the center speaker. The sound output level to the center speaker is set to minimum. The center channel mode is in PHANTOM mode. Incorrect sound field program selection. No sound field program is selected. No sound (or no picture) from an external unit connected with this system. Incorrect cord connections. Input source selection is not proper. REMEDY Plug in the AC supply lead. Connect properly. Unplug the AC supply lead from the wall AC outlet, and then plug in again. Connect it properly. Raise the sound output level to the rear speakers. Select the appropriate program. Raise the sound output level to the center speaker. Select NORMAL mode. Select the appropriate program. Connect the cords properly. If the problem persists, the cords may be defective. Make a proper input source selection.
SYMPTOM Excessive static in FM broadcasts. CAUSE Interference from starting motor of nearby car. Interference from thermostat of nearby electrical appliance. Noise increases during stereo broadcasts. Antenna input is too weak due to obstructions or excessive distance from broadcasting station. Insufficient antenna input. Preset memory has been erased. Interference from source such as lightning, flourescent lights, electric motors or thermostat of nearby electrical appliance. TV or microprocessor is being used nearby. AM (LW or MW) broadcast sensitivity is poor. Radio signal is weak or antenna is not properly connected. REMEDY Position the FM antenna as high and as far away from nearby roads as possible. Connect using a coaxial cable.
Check antenna connections. Install a multi-element type FM antenna if possible. Install an antenna appropriate for the electric field strength of your area. Reprogram memory presets. Problem is difficult to eliminate but can be lessened by grounding MW/LW (AM) loop antenna. Move away from TV or microprocessor. Properly connect MW/LW (AM) loop antenna. Change orientation of MW/LW (AM) loop antenna. Install an external MW/LW (AM) antenna.

s Speaker section

Type Front. 3-Way Active Servo Processing Speaker System (Magnetic-Shielding Type) Center.. Full Range Speaker System (Magnetic-Shielding Type) Rear.. Full Range Speaker System Speakers Front.. 13 cm (5-1/8) woofer 5 cm (1-15/16) tweeter 2 cm (13/16) super tweeter Center.. 9 cm (3-9/16) full range speaker Rear.. 8 cm (3-1/8) full range speaker Frequency Range Front.. 60 20,000 Hz Center.. 100 20,000 Hz Rear... 110 20,000 Hz Sound Pressure Level Front... 87.0 dB Center... 85.0 dB Rear... 85.0 dB Maximum Power Handling Capacity Front.... 90W Center... 27W Rear.... 13.5W Impedance Front... 6 ohms Center.... 8 ohms Rear... 4 ohms

s General

Power Supply [U.S.A. and Canada models].. AC 120V, 60 Hz [U.K., Europe and Singapore models].. AC 230V, 50 Hz [Australia model].. AC 240V, 50 Hz [China model].. AC 220V, 50 Hz [General model].. AC 110/120/220/240V, 60/50 Hz Power consumption... 190W Dimensions (W x H x D) GX-70... 280 x 320 x 360 mm (11 x 12-5/8 x 14-3/16) NX-GX70... 200 x 320 x 243 mm (7-7/8 x 12-5/8 x 9-9/16) NX-C70... 280 x 123 x 140 mm (11 x 4-13/16 x 5-1/2) NX-E70... 200 x 115 x 105 mm (7-7/8 x 4-1/2 x 4-1/8) Weight GX-70.. 10.8 kg (23 lbs. 12 oz.) NX-GX70.. 3.5 kg (7 lbs. 11 oz.) x 2 NX-C70... 1.5 kg (3 lbs. 5 oz.) NX-E70... 0.8 kg (1 lbs. 12 oz.) x 2
YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA
ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, VSTRA FRLUNDA, SWEDEN MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA

Printed in Malaysia

VV18180

 

Tags

MB-4384BCS TH-42PX80E CDE-9852 CT-F6060 P4V8x-X LXT310VP TCS665E Nikon F55D Attax 100 MFC-5840CN HFC111 Enjoy FUN LE46A756r1M PL101 VTX 1000 Deluxe HT-S5100 RX-6010R HC-4-HC-2 SL-SX220 VP-D903 Furby 5810TG FA580 Printer-USB P2470HN SL-SX228 DVD-V6700 AP2610 P4P8X Proceed AMP2 D1776 SD850 IS VSX-C502 KX-FPC161 Pilot PI 2550 Laserjet 1012 DE6844 PEG-SJ20 Photomic TA-6510 VPL-CW125 RCU800 NV-GS57EE 5exthd500EUR KX-TG8011E KDL-52NX805 Versa SXI Jenga Maple Magic2primo Elemental Evil CDR-HD1300 PLC-XU48 Super Review DW-8000 Terminal PC Dartybox Teil 2 Acer X173 A5 V101 PRO A40 YDP-88II E4710 KD-R601E Asus R2H Msac-M2 Delta Singer 4210 SRU5030 86 FX1265W Mouse T-4087 Dvdr3595H-31 Fatal1TY Siemens C56 EX-Z25 CCD-TR315 TC-KE400S Diego Mp35 LRA-760 Learn GO Z5 FD TX-DS484 105 X RHT-G950 Indicator Pfaff 1183 Reserator2 EP2050 BTA-NW1 FS-1535 Dvdr3455H 37B PCG-GRV516G 130ED-QD P5VD1-X SGH-E900 IX5000 Iaudio 7

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101