backline rental

amount description

Rainer Ray Bodenstein Erbsenkamp 22 F D-22175 Hamburg/Germany Fon +49.40.640.89201
daily price 20,00 15,00 35,00 20,00 2,00 20,00 15,00 20,00 25,00 45,00 50,00
weekly price 100,00 75,00 175,00 100,00 10,00 100,00 75,00 100,00 125,00 225,00 250,00
Ashdown MAG 600 Bass top - 575 W Ashdown MAG 410 Deep Bass cabinet - 4x10/tweeter - 450 W DiMavery acoustic 3/4 upright Bass - Fishman BP 100 pick-up Line 6 LD 150 multi Bass/Keyboard combo - 1x12 - 150 W - built-in tuner Line 6 FBV multi pedal - tuner, volume, wah-wah etc. compatible with LD 150 SWR Workingsmans 300 Bass top - 200 W SWR Workingsmans Bass cabinet - 1x15/tweeter - 300 W Fender Blues Junior Tube Combo - 1x12 - 15 W Peavey Delta Blues Tube Combo - 1x15 - 30 W Yamaha RD 200 Stage Piano - 88 keys weighted - build-in speaker Mapex MX Maple Birch Drums - 20/8/10/12/14/Snare 14 Premier XPK Maple Birch Drums - 22/10/12/14/Snare 14 Istanbul Samatya Cymbals handmade - 14 Hi-Hat/16 Crash/18 Crash/20 Ride Sabian B 8 Cymbals - 14 Hi-Hat/16 Crash/20 Ride Vintage Fender Super Reverb (1974) Silver face - Master volume - 4x10 Alnico - 45 W Music Man RD 50 (1982) - 1x12 EV - 50 W Dynacord DC 300 E (1977) 4 channel Keyboard Amp/Leslie - 1x15/1 - 160 W Yamaha SC 800 Guitar (1978) - 3 split pick-ups - Strat/Tele Adds Yamaha MA 10 Headphone amp Keyboard stand Guitar stand Piano bench Tuner

50,00 15,00 10,00

250,00 75,00 50,00

35,00 30,00 25,00 35,00

175,00 150,00 125,00 175,00

2,00 1,00 1,00 1,00 1,00

10,00 5,00 5,00 5,00 5,00
Please mark your amount and type of backline you like to rent or ask us for more information and other brands and types youre looking for by e-mail or fon. We work together with other rental companies. Please contact us for any rental information on the backline, pick up, conditions or special rates for longer rentals. In the meantime we would like to thank you for your time, kind attention and interest in bluedates backline rental. Ray and the bluedates team
bluedates backline rental * www.bluedates.com * info@bluedates.com *

+49.40.640.89201 *

bd2009

DVD PLAYER

DVD-S663/DV-S6165
SERVICE MANUAL SERVICE MANUAL SERVICEMANUAL

IMPORTANT NOTICE

This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel. It has been assumed that basic service procedures inherent to the industry, and more specifically YAMAHA Products, are already known and understood by the users, and have therefore not been restated.

WARNING:

Failure to follow appropriate service and safety procedures when servicing this product may result in personal injury, destruction of expensive components, and failure of the product to perform as specified. For these reasons, we advise all YAMAHA product owners that any service required should be performed by an authorized YAMAHA Retailer or the appointed service representative. IMPORTANT: The presentation or sale of this manual to any individual or firm does not constitute authorization, certification or recognition of any applicable technical capabilities, or establish a principle-agent relationship of any form. The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research, engineering, and service departments of YAMAHA are continually striving to improve YAMAHA products. Modifications are, therefore, inevitable and specifications are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please contact the distributor's Service Division.
Static discharges can destroy expensive components. Discharge any static electricity your body may have accumulated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this buss). IMPORTANT: Turn the unit OFF during disassembly and part replacement. Recheck all work before you apply power to the unit.

I CONTENTS

TO SERVICE PERSONNEL.. 23 PREVENTION OF ELECTROSTATIC DISCHARGE. 4 REGION MANAGEMENT INFORMATION.. 4 FRONT PANELS.. 5 REAR PANELS... 57 REMOTE CONTROL PANEL.. 7 SPECIFICATIONS /. 89 INTERNAL VIEW.. 10 REPAIR NOTES /.. 10 TRADE MODE /.. 1112 DISASSEMBLY PROCEDURES.. 13.. 14 TEST MODE / 15 BLOCK DIAGRAM.. 16 WIRING DIAGRAM.. 17 PRINTED CIRCUIT BOARDS.. 1825 SCHEMATIC DIAGRAMS.. 2633 REPLACEMENT PARTS LIST.. 3435 REMOTE CONTROL.. 36

101102

Copyright 2008 All rights reserved. This manual is copyrighted by YAMAHA and may not be copied or redistributed either in print or electronically without permission.
P.O.Box 1, Hamamatsu, Japan

'08.07

I TO SERVICE PERSONNEL
1. Critical Components Information Components having special characteristics are marked Z and must be replaced with parts having specifications equal to those originally installed. 2. Leakage Current Measurement (For 120V Models Only) When service has been completed, it is imperative to verify that all exposed conductive surfaces are properly insulated from supply circuits.

WALL OUTLET

EQUIPMENT UNDER TEST
AC LEAKAGE TESTER OR EQUIVALENT

INSULATING TABLE

Meter impedance should be equivalent to 1500 ohms shunted by 0.15F.
Leakage current must not exceed 0.5mA. Be sure to test for leakage with the AC plug in both polarities.
WARNING: CHEMICAL CONTENT NOTICE!
This product contains chemicals known to the State of California to cause cancer, or birth defects or other reproductive harm. DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR MOUTH FOR ANY REASON WHAT SO EVER! Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not inhale solder fumes or expose eyes to solder/flux vapor! If you come in contact with solder or components located inside the enclosure of this product, wash your hands before handling food.

I PREVENTION OF ELECTROSTATIC DISCHARGE
The laser diode in the DVD mechanism may be damaged due to static electricity from clothes or the human body. Use caution to prevent electrostatic damage when servicing or handling the DVD-mechanism.
1. Grounding for electrostatic damage prevention
Some devices, such as the DVD player, use an optical pickup (laser diode) that will be damaged by static electricity in the working environment. Only attempt service after ensuring that all grounding procedures have been completed. 1. Worktable grounding Put a grounded conductive material (sheet) or iron sheet on the area where the optical pickup is placed. 2. Human body grounding Use an anti-static wrist strap to discharge the static electricity from your body.
Anti-static wrist strap 1M-ohms
Conductive material (sheet) or steel sheet
2. Handling Precautions for DVD mechanism
1. Handle the DVD mechanism gently, as it is an extremely high-precision assembly. 2. The flexible cable lines may break if an excessive force is applied to it. Use caution when handling the cable. 3. The semi-fixed resistor for laser power adjustment should not be adjusted. Do not turn the resistor.
I REGION MANAGEMENT INFORMATION
Region Management Information: This DVD player is designed and manufactured to respond to the Region Management Information that is recorded on a DVD disc. If the Region number described on the DVD disc does not correspond to the Region number of this DVD player, this DVD player cannot play this disc. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

AUDIO PERFORMANCE / DA converter Signal to noise (1 kHz) Dynamic range (1 kHz) DVD SVCD CD/VCD Distortion and noise (1 kHz) 24 bits 105 dB 97 dB fs 96 kHz fs 48 kHz fs 48 kHz fs 44.1 kHz fs 44.1 kHz 0.0035 %

Hz Hz Hz Hz Hz

to to to to to

kHz kHz kHz kHz kHz

MULTIMEDIA (USB) APPLICATIONS / Connections USB mass storage class device Playback formats (USB device) MP3 fs 32, 44.1, 48 kHz / 96 to 320 kbps WMA fs 44.1 kHz / 64 to 192 kbps fs 48 kHz / 128 to 192 kbps WMV 720 x 480 / 720 x 576 dpi or less DivX JPEG 3072 x 2048 pixels or less TV STANDARD Number of lines Playback (PAL/50 Hz) 625 Multistandard (NTSC/60 Hz) 525 (PAL/NTSC)
Specifications are subject to change without prior notice.

U K A G

. U.S.A and Canada models. Korean model. Australian model. European model
F. Russian model L. Singapore model P. South American model J. Japanese model

DIMENSIONS /

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
DivX, DivX Ultra Certified, and associated logos are trademarks of DivX, Inc. and are used under license.

435 (17-1/8")

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
Unit: mm (inch) This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.

6 (1/4")

(1/16") 51 (1-3/4") (2")
310 (12-3/16") 318 (12-1/2")
DTS and DTS Digital Out are registered trademarks and the DTS logos and Symbol are trademarks of DTS, Inc.

I INTERNAL VIEW

D2 P.C.B. (J model) 2 AV P.C.B. 3 MPEG P.C.B. 4 FRONT (3) P.C.B. 5 Power Supply Unit 6 Loader Ass'y

FRONT (2) P.C.B. 8 FRONT (1) P.C.B. USB Connector

I REPAIR NOTES /

None of the components of the following units can be supplied separately. Each unit must be replaced as a whole in case of a failure. Loader Assy MPEG P.C.B. FRONT P.C.B. AV P.C.B. Power Supply Unit

I TRADE MODE /

This unit provides TRADE mode which prevents the disc tray from opening even when the OPEN/CLOSE key is pressed.

Activating TRADE mode

The power to this unit should be turned on before activating the TRADE mode. 1. Press the OPEN/CLOSE key to open the disc tray. (Fig. 1) 2. Press the 2, 5 and 9 keys on the remote control in that order. (Fig. 2) 3. TRA ON is displayed and TRADE mode is activated. About 2 seconds later, the disc tray is closed automatically. (Fig. 3) Notes) After activating TRADE mode, it is not possible to operate keys of this unit as usual except the following key. STANDBY/ON key (Turn on the power only) But operation with the remote control is available as usual. After TRADE mode is activated, initial settings for repeat reproduction of this unit are as follows. DVD : RPT TT (repeat title) VCD/SVCD/CD : RPT ALL (repeat all)
"STANDBY/ON" key

Disc tray

"OPEN/CLOSE" key

FL display

Fig. 1

TRADE mode display /

Enter /

Fig. 3

Fig. 2 11

Canceling TRADE mode

The power to this unit should be turned on before canceling TRADE mode. 1. Press and hold the STOP key on the remote control. (Fig. 4) The disc tray opens after about 2 second. 2. Press the 2, 5 and 9 keys on the remote control in that order. (Fig. 4) 3. TRA OFF is displayed and TRADE mode is cancelled. About 2 seconds later, the disc tray is closed automatically. (Fig. 5)

Cancel /

Fig. 5

Fig. 4

I DISASSEMBLY PROCEDURES
See REPLACEMENT PARTS LIST for item numbers.

Mounting

When disassembling, use the special screw driver with tip shape in figure.

Top Cover [240]

Remove 5 screws [267] (2 on side and 3 on rear side). Lift top cover from rear side to remove.

2.7 mm

Dismounting

Front Panel Ass'y [1]

Remove 4 cables connections [1110] [1209] [CN3] [1301]. Open disc tray. (Fig. 2) Unlock tray cover ass'y and close disc tray. Remove 2 screws [267] (Front panel to bottom). Unlock front panel ass'y by releasing successively 4 snaps (2 on the side and 2 on the bottom).

Loader Ass'y [1004]

Solder the lands of the optical pick up P.C.B. (Fig. 3) Remove 3 cable connections [1100 (MPEG P.C.B.)] [1101] [1102]. Open disc tray. (Fig. 2) Unlock tray cover ass'y and close disc tray. Remove 4 screws (loader ass'y to frame). Lift loader ass'y up slightly and move it backward to remove.

MPEG P.C.B. [1003]

Solder the lands of the optical pick up P.C.B. (Fig. 3) Remove 7 cable connections [1100 (MPEG P.C.B.)] [1101] [1102] [1110] [1202] [1209] [1213]. Remove 2 screws [256] (P.C.B. to frame). Remove screw [256] (P.C.B. to rear panel). Dismount P.C.B.

Power Supply Unit [1005]

Remove 3 cable connections [CN101] [CN1] [CN3]. Remove 2 screws [256] (P.C.B. to frame). Release 2 spacers locking (P.C.B. to frame). Dismount power supply unit.
FRONT (1) P.C.B. [1001 (1)]
Remove 4 screws [250] (P.C.B. to front panel). Dismount P.C.B. Remove cable connection [1104].
FRONT (2) P.C.B. [1001 (2)]
Remove 2 screws [250] (P.C.B. to front panel). Dismount P.C.B. Remove cable connection [1200 (FRONT P.C.B.)].

AV P.C.B. [1002]

Remove 4 cable connections [1100 (AV P.C.B.)] [1109] [1200 (AV P.C.B.)] [1201]. Remove 3 screws [250] (U, K, A, L, P models) / 5 screws (G, F models) (P.C.B. to rear panel). Remove 1 screw [256] (P.C.B. to rear panel). (U, K, A, L, P models) Release 2 spacers locking (P.C.B. to frame). Dismount P.C.B.
FRONT (3) P.C.B. [1001 (3)]
Remove cable connection [1301]. Remove 2 screws [256] (P.C.B. to rear panel). Dismount P.C.B.

Cable connections

1201 (AV P.C.B.) AV P.C.B. 1202 (MPEG P.C.B.) 1100 FRONT (3) P.C.B. 1301 Power supply unit CN101
How to manually eject the disc tray
a. Move the slider in the direction indicated with a screwdriver until the disc tray is ejected. b. Gently pull the disc tray out.
Preventive measure for optical pick up from electrostatic breakdown
When replacing the MPEG P.C.B. or loader ass'y, solder between lands of the optical pick up P.C.B. to protect the laser diode against electrostatic breakdown. Notes Use an anti-static soldering iron to shortcircuit and unshort-circuit optical pick up P.C.B. After you have finished repairing, remove the solder from the short-circuit location.

MPEG P.C.B.

Lock 1200 (AV P.C.B.) 1100 (MPEG P.C.B.) Flexible flat cable 1213 CN3 CN1 A Bottom side Flatblade screwdriver Slider Optical pick up
Unlock Flexible flat cable

Loader ass'y

1102 (MPEG P.C.B.) View A

Front panel ass'y

FRONT (2) P.C.B.
Solder Flatblade screwdriver 1104 FRONT (1) P.C.B. Fig. (FRONT P.C.B.) Fig. 2 Fig. 3

I TEST MODE /

Starting Test Mode
a. Connect the power cable to the AC power outlet. b. Press the STANDBY/ON key while simultaneously pressing PAUSE and STOP keys for 8 seconds or longer. c. The FV xx (firmware version) is displayed.

Panel Key Test

The display changes as shown below by pressing the specified key.
Press OPEN/CLOSE key of this unit.

Display Test

Press STANDBY/ON key of this unit.

(OFF) (OFF)

Initial display / Press PLAY key of this unit.

(ON) (ON)

All segments on / Press PLAY key of this unit.
Press PLAY key of this unit.
Lighting of segments in lattice / Press STOP key of this unit.
Press PAUSE key of this unit.
Press STOP key of this unit.
Press PLAY/PAUSE key of the remote control.

Initial display /

Canceling Test Mode
Disconnect the power cable from the AC power outlet.

A DVD-S663/DV-S6165 1

I BLOCK DIAGRAM
Interface between Loader Ass'y (KMH3133A) and MPEG:
GND LD_DVD NC HFM MD LD_CD VR_DVD VR_CD NC E VCC VC GND F B A RF CD/DVD D C TT+ F+ FSPSP+ L_SW L_SW SLEDSLED+

3P 2.50 DIPMATE

2P 2.50 DIPMATE

2P EH H

Front (1) Display

Ext_IR

1 +5V_STBY 2 GND 3 EXT_IR

3P EH H

OptoCoupler

Ext_IR Trans

PCM_LRCK IR VSDA/VSCK/VSTB

FRONT (2) Standby/ON

1 Stby_ON 2 GND

PT6312 VFD Driver

7301 1101

IR_OUT

USB connector

+5V_STBY

See page 30, 31 SCHEMATIC DIAGRAM

5P 2.50 DIPMATE

Stby_det

FRONT (3) IR link

8P 2.50 DIPMATE
5V_Vbus DM DP GND GND(shield)

6P PH V 24P 0.5 FFC H

VSDA/SDA_1 VSCK/SCL1 Fnt_Stb GND IR LRCK/GND +5VL Stby_Det

5P PH V

5V_Vbus DP,DM

KHM313AAM

CON V 8P M 2.50

Current Limiter

USB_oc

SDRAM 8MX16

Flash 2MX8

MPEG SD10.1 Class6, 4L

3V3A for Pin 190/195(VideoDACVDD), 216(Audio CLK VDD)

E2PROM

228(DACVDD) 243(PLLVDD) 248(ADCVDD) Pin 234 is 1V8 specially for SACD

GND +12VA GND +5V -24V

USB_en

IR (109)

1101 7103

+5V_stby

MCU_irqN Fnt_irqN (FRT_STB)

SCL1 (VSCK), SDA1 (VSDA)

5P EH V

+3V3_stby

ASA LOADER WXD8829

5P PH H

LOAD+ LOADGND TROUT TRIN
MOTOR DRIVER AM5888S MT1389S

3.3V Regulator

3.3V PNP

Power Supply Unit

1.8V PNP

Regulator (AM588S)

See page 33 SCHEMATIC DIAGRAM
VSYNC HDMI_INT HSYNC GND SPDIF +5V_STBY DSD_LFE +5VL PCM_LR (DSD_L) +3V3_HDMI PCM_LsRs (DSD_Ls) +3V3_HDMI PCM_Clfe (DSD_C) +3V3_HDMI PCM_Cs (DSD_R) +3V3_HDMI PCM_LtRt (DSD_Rs) GND PCM_LRCK GND PCM_BCLK (DSD_CLK) GND PCM_MLK GND GND GND VCLK GND Y0 GND Y1 GND Y2 GND Y3 GND Y4 GND Y5 GND Y6 GND Y7 GND SCL_1 GND SDA_1 CEC_WAKEUP CEC CEC_INT

Stby_psu SCL0, SDA0

Line_in

YPbPr/sY/sC/CVBS

Spdif_i/Line_i MCKi/BCKi/LRCKi HP_Det Line_Det/ioex_irqN S2, SEL_{1:0} ipod_rx, ipod_tx Mic_in/GPIO

7203 CN1

CEC_DET

Loader Ass'y

CS8416
CEC TMDS,DDC HPD CEC_WakeUP

8P EH V

8bit ITU601

+5V_STBY,

CEC_IrqN

HDMI_intN

DAC_STB/SEL_0

S{1:0}

3V3_stby,
PCM{4:1}/DSD{6:1}/ MCK/BCK/LRCK
See page 26, 27 SCHEMATIC DIAGRAM

1201 HDMI 1200

SPDIF_o

9P EH V

50P 0.5 FFC SM H

30P 1.25 FFC H

21P 1.25 FCC H
9 Stby_PSU +5VL +5VL GND GND NC +5V_MTK +5V_MTK +12VL_A
+5V GND +5V GND +12VA +5V -12VA NC
PCM_LRCLK GND PCM_BCLK Vsel/P50 PCM_data4(PCM_LtRt) D2_5V NC DPDET NC GND PCM_MCLK MUTE_CTRL_1 VSCK DAC_RST VSDA DAC_STB SPDIF_OUT S0 S/Y DAC_RST S1 S/C Y/C_REF CVBS CVBS_REF Y Y_REF Pb Pb_REF Pr Pr_REF
GND AUX_IN TV_muteN AV_irqN(Chgr_irqN) GND SPDIF_i GND UART_Rx UART_Tx(Line_det) GND SCL0 SDA0 GND DAC_rstN USB_Enb stby_det(HP_det) stby_psu sel_1 sel_0 S2(DC_err) GND
Interface between AV and MPEG:

AV_MuteN

DAC_rstN
Interface between MPEG and AV:
AHC125 Buffer MCK,BCK,LRCK

PCM LtRt

sY, sC, CVBS

-12Va -9Va

1300mA

TS5V330 Video SW

+5Vstby +5VL +12Va +9Va

AHC125 Buffer

+12V Stby_ctl

50mA 50mA 300mA

Stby_ctl

10P FFC V

St ereo DAC AK4385

LtRt Opamp+LPF

P16 P8
BH7868 Video 6dB Buffer+LPF

D2_line2/D2_Dpdet

D2 (J model)
See page 32 SCHEMATIC DIAGRAM

1101 1103

1101 1102

Coax Opt

AV Class 3, 2L

AUDIO OUT

VIDEO OUT

(G, F models)

(U, K, A, G, F, L, P models) (J model) (U, K, A, G, F, L, P models)
See page 28, 29 SCHEMATIC DIAGRAM

J DVD-S663/DV-S6165

I WIRING DIAGRAM

HLEM10S-1R

10P/080/10P BD

(J model)

1201 CN1

8P/340/8P

to USB connector (Front panel)

319804002080

440054-5

440054-5 1XXX 1XXX 1XXX

319804000020
Loader Ass'y FRONT (1) Display

B03B-PASK 1103

B03B-PASK

I PRINTED CIRCUIT BOARDS

FOR INFORMATION ONLY (COMPONENT PARTS NOT AVAILABLE)
The first digit of a component indicates the component type. 1xxx : Connector 2xxx : Capacitor 3xxx : Resistor 4xxx : SMD jumper 5xxx : Coil 6xxx : Diode 7xxx : IC, Transistor, FET 9xxx : Wire jumper

5119 BLM18P

FV1P4 29
PWMOUT1|V_ADIN0 TROPENPWM VREF1V4 VREF2V0 VREF2V8

7120 BSN20

USBP USBM

USB_VBUS

1 F125 F126 F127 F128 F129 FSL+ 4 SL- 5 SP+ HLW5S-2C7 SP2R2 2R5
1102 F131 F132 F133 F134 F135
+5VL 100n 100n 2195 100n 3145 3K3 +1V8
3169 5K1 USB_STBY 7115 BC807-25

178 172

LOADLOAD+ TROUT

REFERENCE VOLTAGE

AVDD3V3_VPLL AVDD3V3_TX 0 AVDD1V8_TX 1
AGND3V3_VPLL AGND3V3_TX 0 AGND1V8_TX TXO P N P TX0 N P TX1 N P TX2 N

3144 4K7

+12V_A

319804000050

3142 100K 4 EN_ 1 IN 2 GND 3 OC_ 1 OUT 5 10K USB_OC 6.3V 47u 2300

SPDIFIN_MCK SPDIFIN_BCK

15n 22p 22p 22p

3125 3127

USB_EN 470R USB_VBUS

USBM USBP

3148 10K HSYNC VSYNC 3172-3172-3172-3172-4 3173-1 3173-2 3173-3 3173-33R 33R 1 33R 2 33R 3 33R 4 33R 33R 33R 33R 33R TRIN TROUT

2301 5n6

208 209

EXT_CAP 6 7

2128 2129

2194 100n

5 319804000050

BC817-+5VL

EXT_RES
STBY_PSUMPEG 4113 33R 47R 47R 47R 100R S2 DDC_CLK DDC_DATA

HDMI_INT CEC_OUT

5129 50R

TS_DATA

2309 2nOP+ 680K

V1P4 OP-

to USB connector

5131 BLM31

Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0

4K7 4K7

3132 TROUT TRIN +1V8 60R 2179 4u7 100n F2165 22p 1105 27M RC 4K109 7110-1 MT1389EXE/S

3931 4K7

7111 TPS2051BD

5127 BLM31

7112 NCP303LSN4 IN RST GND NC CD 5
2182 100n 4109 100n 2157 +3V3
TS_VALID TS_CLK TS_SYNC TS_ERROR TS_PWM
GPIO4 GPIO5 GPIO6_DDC_DA GPIO7_DDC_CLK GPIO8_HPLG GPIO9 GPIO10 GPIO11 GPIO12 GPIO

3165 3919

22R 22R
SPDIFIN_LRCK LINE_IN_98 HPD VCLK PCM_LRCLK PCM_BCLK DSD_Lfe SEL_1 MIC_IN_98 MIC_IN_66

2156 22p

+5VL 50R AM5888S 47u 16V

5128 BLM31

100K F+5VL
SPDIFIN_LRCK LINE_IN_SSSEL_SEL_VSCK 3918 VSDA 4125 STBY_DET 4126 STBY_PSU

CONTROL

AVDD18_DMPLL XTALI XTALO AGND18_DMPLL PRST

+5V_STBY 3925

3924 10K 4139 7110-2 MT1389EXE/S 100R 100R 100R 100R 100R 100R 100R 100R 100R 100R 100R 100R 7118 BC817-25

2159 IR MISC 101 102

AD(0:7)
AD(0) AD(1) AD(2) AD(3) AD(4) AD(5) AD(6) AD(7)
FOSO 3128 DMSO 10K FMSO +5M

MOTOR DRIVER

VCC + + VOSL + VOLD + VOTK F+ FSP+ SPSL+ SLTT+ LOAD+ LOADREGO1 REGO2

A(0:22)

A(0) A(1) A(2) A(3) A(4) A(5) A(6) A(7) A(8) A(9) A(10) A(11) A(12) A(13) A(14) A(15) A(16) A(17) A(18) A(19) A(20) A(21) A(22)
VINSL+ VINLD VINTK VTCL FWD REV 1 TRB 2 VOTR BIAS MUTE REGO

2130 100n

TRSO 3129 10K 10K 3130 TRCLOSE TROPEN TRB1 TRB2 V1P4 MOT_STBY 100n

F149 D11 F150 D11 F151 I8 F152 I8 F153 I8 F154 I8 F155 G5 F156 G8 F157 I7 F159 G5

MPEG 2/2

1200 DEDGGGDDDCCCAAAAAAAAAACABBBBBBBDCCCCDDDDDDFFFFGGEEHHHHGGGEEEGFHGHIHHAGGGHIDDCDDAIDDEEEEEDDFFEEGGFFHHGGHHIICCDFFGEHHHIIDDCFFFIFFFGICIIHIIIHCFFFGIIHIEEFFDDFFEEEEEEGGGGEDDDEEEFEEEGIIIHHIHECEEGGGCDDEAAAAFFDFEGFHACHHAGGGHFFFFIIGGHABCFFFHABII1 F201 I9 F202 C8 F203 C8 F204 D8 F205 D8 F206 D8 F207 D8 F208 D8 F209 D8 F210 E8 F211 E8 F212 E8 F213 E8 F214 E8 F215 E8 F216 E8 F217 F4 F218 D4 F219 F4 F220 E4 F221 F4 F222 E4 F223 F4 F224 E4 F225 E4 F226 E4 F227 E4 F228 E4 F229 E4 F230 E4 F231 E4 F232 E4 F233 E4 F234 E4 F235 F4 F236 F4 F237 F4 F238 F4 F239 F4 F240 F4 F241 G3 F242 G3 F243 G3 F244 H3 F245 H3 F246 H3 F247 H3 F248 H3 F249 I3 F251 A11 F252 B11 F253 B11 F254 B11 F255 B11 F256 B11 F257 B11 F258 B11 F259 C11 F260 D11 F261 D11 F262 D11 F263 E12 F264 A12 F265 G13 F266 A6 F267 G6

+3V47u 6.3V 60R

9 MA(0) MA(1) MA(2) MA(3) MA(4) MA(5) MA(6) MA(7) MA(8) MA(9) MA(10) MA(11) VDD 0 DRAM 1 1M X 16 X 5 A 0 1M-10 IS42S16400D-6TL 11 D BA0 BA1 DCLK DCKE CS RAS CAS WE 0 BA 1 CLK CKE CS RAS CAS WE VSS VSSQ DQM 52
100n 100n 100n 100n 100n 100n 100n
+3V3_FL 7205 M29W640FT70N6F F266 37
5207 BLM18P 60R +3V2209 47u 6.3V 100n D 2256 100n

5211 BLM18P

62684-501100A 7212 M24C16-RDW6TP CEC_INT CEC CEC_WAKEUP D 5 SDA_0 SDA_1 SCL_0 SCL_4260 F251 F252 F253 F254 F255 F256 F257 FF52 F1
CEC_INT 2273 CEC CEC_KEY SDA_0 GND SCL_0 GND Y7 GND Y6 GND Y5 GND Y4 GND Y3 GND Y2 GND Y1 GND Y0 GND V_CLK GND GND GND PCM_MCLK GND PCM_BCLK

VDDQ NC 36 40

DQ(7) DQ(6) DQ(5) DQ(4) DQ(3) DQ(2) DQ(1) DQ(0) DQ(8) DQ(9) DQ(10) DQ(11) DQ(12) DQ(13) DQ(14) DQ(15)
A(1) A(2) A(3) A(4) A(5) A(6) A(7) A(8) A(9) A(10) A(11) A(12) A(13) A(14) A(15) A(16) A(17) A(18) A(19) A(20) A(21) A(22)

A RB RP WE OE CE BYTE

EPROM 8Mx8/4Mx16

0 64M-1

(2Kx8) EEPROM
22p 22p 22p 22p 22p 22p 22p 22p

WC SCL

SCL_0 SDA_0

Y7 Y6 Y5

2217 2218
Y4 Y3 CEC_DET +3V3 Y2 YBSNY0 VCLK

22R +3V3_FL 4251

DQM1 DQM0
+3V3_FL PWR PRD PCE +3V3_FL 1K0 10K

VPP/WP_

CEC_OUT
3244 PCM_MCLK 33R PCM_BCLK PCM_LRCLK PCM_LR PCM_LsRs PCM_CLfe +3V3_VL PCM_Cs PCM_LTRT

HLEM10S-1R +5VL

3131 10K

3133 220R

Svideo_C

3135 120R T138 100n 5 220p 3132 TT140 T139 47K 4 47K 1 47K 47p

2152 220p

Y2 S_Y_1 U2

T157 T160 T158 T159

FOR EU VERSION ONLY

CVBS_1

US/AP 0R EU BAS+5VV
T220p GND 6109 BZX384-C220p GND T133 MSP-801V1-02-01-B NI FE LF 6 1102-B 7 1102-A MSP-801V1-02-01-B NI FE LF 4 T134

+5VL 5106

S-VIDEO

Svideo_Y

1B 2B 1C 2C

2112 100n

MSP-801V1-02-01-B NI FE LF 1102-C RED_BLACK
(U, K, A, G, F, L, P models) COMPONENT Y VIDEO PR/CR

7127 BSN20

2 D2_5V

SPDIF_OUT_1

BSN20 7126

1D S 2D

GND GND

V DPDET U Y

5110 600R

GREEN_BLUE

FOR Japan VERSION ONLY 100n VS IN GND JFJ1000-010010 +5VV

9.5V~12V ( 4:3 )

2158 220p

PB/CB COAXIAL

BRACKET 1120

GND +5VV 1

R|V B|U G|Y

S1_L3_1

0|6|12

DIGITAL OUT

OPTICAL (J model)

7113-1 PUMH7

T150 T151 T152 T153 T101 T102 T103 T104 T105 T106 T107 T108 T109 T110 T111 T156
1101-2 MSD-244V-88 NI FE LF

STB_CONTROL

Vsel|P50

O/P IC 7101

SCART PIN16 0V:CVBS 1-3V:RGB

YPbPr RGB

HIGH-1
FROM 1202 OF SD10.1 BOARD

7113-2 PUMH7 4

SCART_R 3 GND MUTE 3155 1K7115 BC817-40 2
3153 100R 3156 1K47K 2162 680p
MRC-021V-19 PC 1103-1 T141

Page 27 D5 to MPEG_1202

S_C S1_L3_1 S_Y S0_L3_0 SPDIF_OUT DAC_STB VSDA DAC_RST VSCK AV_MUTE PCM_MCLK

SPDIF_OUT

100n 2198

1KPDTC144ET

3170 75R

10n 2164

4 BC847BPN 7117-2
S1 S0 SD-OUT 0|2|5 signal 4:3 Normal 0V 4:3 Letter Box 2.1V 16:9 Squeeze 4.6V

33R SPDIF_OUT_74AHC1G125

7116 BC817-40 2

1 NC T3 4

SCART_L 3 MUTE 3171 1K7119 BC817-3172 1K3159 100R

680p T1243

GND 5108 +5VV

S1_L3_1 S0_L3_0 S_C

VCC1 S1 S2 CIN MUTE1 CVIN SEL_CV_MIX YIN BIAS SEL_BIAS_CLAMP PY|GIN GND1 PB|BIN MUTE2 PR|RIN VCCBH7868FS COUT SDCOUT CVOUT CVOUT_SAG GND2 YOUT YOUTSAG GND3 PY|G_OUT PY|G_OUT_SAG GND4 PB|B_OUT PB|B_OUT_SAG GND5 PR|R_OUT PR|R_OUT_SAG 2114 47p 2197 47p 47p 47p 47p 10K 100n 3115 75R 75R 75R

470R 2216 680p

7214-2 MC33078D 7
100R 3237 100R +5V LCH BC857B 7216 AGND GND

BAS220K 100K 3242

5K1 680p

4K7 GND

8 T200 T201

Current rating 3A 5208

Source Current 1A (usb 500mA ) for SI2313BDS--> source current 630mA

2222 25V 100u

+5VL 22u 50V

POWER_PART

+5V_MTK 50R

25V 100u

7217 SI2314EDS

BAS3250

22u 50V
Page 33 I3 to Power Supply Unit_CN1

T202 T203

+12V +12V
SI2301BDS 3254 10K 47K 2K2 6

3251 GND 100n 22R

BC857B 7218 1n0 2259
25V100u 2228 25V100u 2260 1n0 2u2

NC 319804002080

-12V_CTRL 1K0 3256

GND 10K

2K7 7231-2 PUMH7 4
HAVE TO CHECK THE POWER RATING FOR 22R
PCM_MCLK BAS33R 1 EN 7238-1 74AHC125PW

GND +5V

7231-1 PUMH7

BC857B 7243

3286 220R 2262 MCLK_buf

T206 T205

STB_CONTROL +5VL

+5V_MTK +12V_A

Page 27 C8 to MPEG_1212

NC BAS316

7240 L78L05ACD 7242 L78L08ACD IN GND GND NC OUT GND GND NC 5211 100n 22u 50V 600R 2268 100n NC IN GND GND NC OUT GND GND NC NC 5210 600R 2275 T216

3297 10K

(Active High )
PCM_BCLK 3298 33R BC847B 7247
7238-2 74AHC125PW 33R 7238-3 74AHC125PW 8 BCLK_buf
319804002090 4.83V 850mA 4.85V 20mA

STB_CONTROL 6218

BAST218
GND DAC_DZFL GND 7245 L79L08ACD 2272
GND BC817-7246 22R 3289 10K 6.3V 22u -12V_CTRL

(Active High) BAS316

3299 33R

3208 1K0

3296 33R 2271 LRCLK_buf

-V REG

1 NC 2 VIN 3 VOUT 4 GND 5

3285 100R BC857B 7248

4 NC 8 NC 6.3V 22u

47K +5V 22K AV_MUTE

Active Low

3287 330R

3203 22K

7239 BC847B

3209 PCM_LTRT 33R
4208 7238-4 74AHC125PW 11

LTRT_buf

3210 33R 2274 12p

GND GND GND

H * OPTION
DVD-S663/DV-S6165 The first digit of a component indicates the component type. 1xxx : Connector 2xxx : Capacitor 3xxx : Resistor 4xxx : SMD jumper 11 5xxx : Coil 6xxx : Diode 12 7xxx : IC, Transistor, FET 9xxx : Wire jumper
1100 ADEHCGGGHGGCCCHHICIGGHHHCECGHHHIECCDEEEEEEDEHHHHHIAAAAABBBBBBBBBBBBBBCCCEEEFFICCCFICGHHHHHGFFCHHII11 7106-1 H4 7106-2 I4 7106-3 I5 7106-4 I5 T100 D2 T101 D2 T102 D2 T103 D2 T105 E2 T106 E2 T107 E2 T108 F2 T109 F2 T110 F2 T111 F2 T112 F2 T115 H3 T116 H3 T117 H3 T118 H9 T119 H9 T120 H10

FRONT 1/2

1100 7-BT-299GNK

F1_1 F1_2

7G 6G 5G 4G 3G 2G 1G NC6

F2_1 F2_2

NC1 P1 P2 P3 P4 P5 P6 P7 P8 P9 P10 P11 P12 P13 P14 P15
100K 3125 100K 3127 100K 3129 100K 3131 100K 3133 100K 3135 100K 100K 100K 100K 100K 100K 100K 3144 100K 3139 100K 3141 100K 3143 100K 3145 100K 100K 100K 100K 100K

4K7 6110

FRONT 2/2

FRONT (3) FRONT (2)

1301 AA4

1303 AB4

1320 BB1

2302 BA4

2304 AB2

3302 AB3

3304 AA3

7301 B2 T310 A1

T311 A1 T312 B1

T313 A4 T314 A4

T315 A4

1200 AAA1 T210 A1 T211 A1

T313 +5V_STBY T10p

REMOTE CONTROL

MSJ-035-12A PC

Page 30 C1 to FRONT (1)_1104

BZX384-C5V2 TSKQNAB

1301 10u 25V

2304 470R

319804002030

T211 319804003020

GND EXT_IR

10 MSJ-035-12A PC

3 T312 100n BC847BW 3301 10K 470R 3303 EL816

2302 10p

Page 30 H3 to FRONT (1)_1103

1100 AA4

2101 BB3

2103 BB3

6101 BB3

6103 B3 T101 A1

T102 A1 T103 A1

T104 A1 T105 A1

T106 A1 T107 A1
HLEM10S-1R YU2 V2 D2_5V 0|2|5 DPDET T101 T102 T103 T104 T105 T106 T107

Page 28 A7 to AV_1109

6101 220p BZX384-C4V7 BZX384-C4V7 220p GND BZX384-C4V7 220p 3101 10K

CSS0514-0801

POWER SUPPLY UNIT

Page 29 D2 to AV_1200

Page 30 D1 to FRONT (1)_1101

POWER TRANSFORMER AC IN

I REPLACEMENT PARTS LIST

OVERALL ASSY

240 267
When disassembling, use the special screw driver with such tip shape as shown in figure.

3 x 8 P-Tight Black 230

250 J model 256 U, K, A, L,

P, J model

256 267
3 x 6 S-Tight Black 3 x 6 S-Tight with the brim 3 x 15 S-Tight Black (No replacement part available. / )

250 G, F models 1004-250

G, F models

267 192

1001 (2) 1001 (1) U, K, A, L, P, J models 183 8104
Note) The replacement battery cover is not available.

1001 (3)

8009 256

2003 G, F models

EMC spring B

2004 G, F models

Front panel ass'y Chassis
I WARNING G Components having special characteristics are marked Z and must be replaced with parts having specifications equal to those originally installed.

s s s s s

New Parts

I REMOTE CONTROL

PANEL DVD-16 No.

KEY NO. LAYOUT

KEY CODE Key label
STANDBY (POWER) TOP MENU/RETURN ON SCREEN H (UP) Q (LEFT) ENTER W (RIGHT) G (DOWN) MENU SET UP T (SKIP) / SEARCHW/D (PLAY/PAUSE) * D Y (SKIP) / SEARCH+ A (STOP) USB 9 SUBTITLE 0 AUDIO ZOOM REPEAT REPEAT A-B * Possible receiving PLAY : 7C-82 PAUSE : 7C-83
7C-80 7C-B1 7C-A6 7C-B4 7C-B5 7C-B8 7C-B6 7C-B3 7C-B2 7C-AC 7C-B9 7C-92 7C-BA 7C-85 7C-E6 7C-94 7C-95 7C-96 7C-97 7C-98 7C-99 7C-9A 7C-9B 7C-9C 7C-AA 7C-93 7C-AD 7C-D7 7C-A3 7C-A4