MG206C, MG166C, MG124C, MG102C

Mixing Consoles

MG206C

MG124C

MG166C

MG102C

A selection of lightweight, portable mixing consoles featuring Yamahas one-knob compressor for advanced sonic control.
10, 12, 16, or 20 inputs in remarkably lightweight, portable designs. Yamahas innovative one-knob compressor lets you easily dial in the amount of compression you need. High-quality Neutrik balanced XLR connectors on mono microphone/line channels and XLR-equipped stereo channels. Top-mounted input and output connectors for easy setup and re-patching. High-performance microphone preamplifiers with switchable phantom power. 3-band channel EQ and high-pass filters (sweepable midrange on the MG206C, MG166C). Smooth 60-millimeter faders & illuminated channel ON switches (MG206C, MG166C, MG124C). The MG102C has a single stereo bus (i.e. two mono buses), while all other models feature one or two additional
stereo group buses and outputs for convenient channel grouping.
AUX sends with master send controls for convenient processing and monitoring. Return level controls for the AUX and STEREO buses. Bright meters for visual level monitoring. Optional microphone stand mount available for the MG102C. MG206C, MG166C rack mountable.

OPTIONS

BMS10A
Mic Stand Adaptor for MG102C

GENERAL SPECIFICATIONS

MG206C Mic/Line inputs Line inputs Mixer input channels Group buses AUX buses Main buses Total harmonic distortion (THD+N) Frequency response Hum and noise level Crosstalk (@1kHz) Power supply adaptor Power consumption Dimensions (W x H x D) Net weight mono + 4 stereo 4 Stereo Less than 0.1%, 20Hz-20kHz 0, +1, -3dB , 20Hz-20kHz Equivalent input noise (EIN): -128dBu Residual output noise: -98dBu -70dB PA-30 AC adaptor (AC35VCT, 1.4A) 100V, 120V, 220V, 230V or 240V; 50/60Hz 40W 478 x 102 x 496mm (18.8" x 4.0" x 19.5") 6.0kg (13.2lbs) PA-30 AC adaptor (AC35VCT, 1.4A) 100V, 120V, 220V, 230V or 240V; 50/60Hz 30W 478 x 105 x 496mm (18.8" x 4.1" x 19.5") 5.3kg (11.7lbs) PA-20 AC adaptor (AC35VCT, 0.94A) 100V, 120V, 220V, 230V or 240V; 50/60Hz 30W 346.2 x 86.1 x 436.6mm (13.6" x 3.4" x 17.2") 3.0kg (6.6lbs) MG166C mono + 4 stereo 3 Stereo MG124C mono + 4 stereo 2 Stereo MG102C mono + 4 stereo Stereo
Equivalent input noise (EIN): -128dBu Residual output noise: -100dBu PA-10 AC adaptor (AC38VCT, 0.62A) 100V, 120V, 220V, 230V or 240V; 50/60Hz 21W 256.6 x 62.2 x 302.5mm (10.1" x 2.5" x 11.9") 1.5kg (3.3lbs)
Hum and noise are measured with a 6dB/octave filter @12.7kHz; equivalent to a 20kHz filter with infinite dB/octave attenuation.

INPUT SPECIFICATIONS

Terminal Gain Actual Load For Use With Impedance Nominal Input Level Sensitivity Nominal -80dBu -36dBu -54dBu -10dBu -80dBu -36dBu -54dBu -10dBu -54dBu -10dBu -20dBu -12dBu -26dBV -80dBu -36dBu -54dBu -10dBu -80dBu -36dBu -54dBu -10dBu -30dBu -20dBu -12dBu -26dBV -80dBu -36dBu -54dBu -10dBu -80dBu -36dBu -54dBu -10dBu -30dBu -20dBu -12dBu -26dBV -72dBu -28dBu -46dBu - 2dBu -72dBu -28dBu -46dBu - 2dBu -22dBu -12dBu - 8dBu -22dBV -60dBu -16dBu -34dBu +10dBu -60dBu -16dBu -34dBu +10dBu -34dBu +10dBu 0dBu +4dBu -10dBV -60dBu -16dBu -34dBu +10dBu -60dBu -16dBu -34dBu +10dBu -10dBu 0dBu +4dBu -10dBV -60dBu -16dBu -34dBu +10dBu -60dBu -16dBu -34dBu +10dBu -10dBu 0dBu +4dBu -10dBV -60dBu -16dBu -34dBu +10dBu -60dBu -16dBu -34dBu +10dBu -10dBu 0dBu +4dBu -10dBV Max. before Clip Connector

OUTPUT SPECIFICATIONS

Terminal Actual Source For Use With Impedance Nominal 100 Output Level Nominal Max. before Clip +24dBu +20dBu +20dBu +20dBu +10dBV +20dBu 75mW +24dBu +20dBu +20dBu +20dBu +10dBV +20dBu 75mW +24dBu +20dBu +20dBu +20dBu +10dBV +20dBu 75mW +20dBu +20dBu +20dBu +10dBV +20dBu 75mW Connector

MG206C CH IN MIC (1-12) CH IN LINE (1-12) ST CH MIC IN (13/14-19/20) ST CH LINE IN (13/14, 15/16) ST CH LINE IN (17/18, 19/20) -60dB -16dB -34dB +10dB -60dB -16dB -34dB +10dB -34dB 3k 10k 3k 10k 10k 10k 10k 10k 10k 50-600 Mics 600 Lines 50-600 Mics 600 Lines 600 Lines 600 Lines 600 Lines 50-600 Mics 600 Lines MG166C CH IN MIC (1-8) CH IN LINE (1-8) ST CH MIC IN (9/10, 11/12) ST CH LINE IN (9/10, 11/12) ST CH IN(13/14, 15/16) CH INSERT IN (1-8) RETURN [L,R] 2TR IN [L,R] -60dB -16dB -34dB +10dB -60dB -16dB -34dB +10dB 3k 10k 3k 10k 10k 10k 10k 10k 3k 10k 3k 10k 10k 10k 10k 10k 3k 10k 3k 10k 10k 10k 10k 10k 50-600 Mics 600 Lines 50-600 Mics 600 Lines 600 Lines 600 Lines 600 Lines 600 Lines MG124C -60dB CH IN MIC (1-4) -16dB -34dB CH IN LINE (1-4) +10dB -60dB ST CH MIC IN (5/6,7/8) -16dB -34dB ST CH LINE IN (5/6,7/8) +10dB ST CH IN (9/10,11/12) CH INSERT IN (1-4) RETURN [L,R] 2TR IN [L,R] -60dB -16dB -34dB CH IN LINE (1, 2) +10dB -60dB ST CH MIC IN (3/4, 5/6) -16dB -34dB ST CH LINE IN (3/4, 5/6) +10dB ST CH IN (7/8, 9/10) CH INSERT IN (1, 2) RETURN [L,R] 2TR IN [L,R] CH IN MIC (1, 2) 50-600 Mics 600 Lines 50-600 Mics 600 Lines 600 Lines 600 Lines 600 Lines 600 Lines MG102C 50-600 Mics 600 Lines 50-600 Mics 600 Lines 600 Lines 600 Lines 600 Lines 600 Lines -40dBu +4dBu -14dBu +30dBu -40dBu -6dBu -14dBu +30dBu XLR-3-31 type* TRS Phone jack* XLR-3-31 type* Phone jack** MG166C, MG166CX, MG206C, MG166C-USB, MG166CX-USB, MG206C-USB -40dBu +4dBu -14dBu +30dBu -40dBu -6dBu -14dBu +30dBu XLR-3-31 type* TRS Phone jack* TRS Phone jack* Phone jack**
-40dBu XLR-3-31 type* +4dBu -14dBu TRS Phone jack* +30dBu -40dBu XLR-3-31 type* -6dBu -14dBu Phone jack** +30dBu -14dBu Phone jack** +30dBu
Phone jack** RCA pin jack**
STEREO OUT [L,R] GROUP OUT [1-4] AUX SEND (1-4) CH INSERT OUT (1-12) REC OUT [L, R] MONITOR OUT [L, R] PHONES OUT STEREO OUT [L,R] GROUP OUT [1-4] AUX SEND (1-3) CH INSERT OUT (1-8) REC OUT [L, R] MONITOR OUT [L, R] PHONES OUT STEREO OUT [L, R] GROUP OUT [1, 2] AUX SEND (1, 2) CH INSERT OUT (1-4) REC OUT [L, R] MONITOR OUT [L, R] PHONES OUT STEREO OUT [L,R] AUX SEND CH INSERT OUT (1-2) REC OUT [L, R] MONITOR OUT [L, R] PHONES OUT *** : Impedance balanced
MG206C 600 Lines +4dBu 10k Lines +4dBu 10k Lines 10k Lines 10k Lines 10k Lines 40k Lines +4dBu 0dBu -10dBV +4dBu 3mW
XLR 3-32 type* Phone jack*
Phone jack (TRS)*** Phone jack (TRS)*** Phone jack (TRS)** RCA pin jack** Phone jack (TRS)*** Stereo phone jack**

XLR 3-32 type* Phone jack (TRS)*
+10dB CH INSERT IN (1-12) RETURN [L,R] 2TR IN [L,R]
MG166C 600 Lines +4dBu 10k Lines +4dBu 10k Lines 10k Lines 10k Lines 10k Lines 40k Lines +4dBu 0dBu -10dBV +4dBu 3mW
+20dBu TRS Phone jack** +24dBu Phone jack** +10dBV RCA pin jack** -40dBu +4dBu -14dBu
Phone jack (TRS)*** Phone jack (TRS)*** Phone jack (TRS)** RCA pin jack** Phone jack (TRS)* Stereo phone jack**

XLR-3-31 type*

TRS Phone jack* +30dBu -40dBu XLR-3-31 type* -6dBu -14dBu Phone jack** +30dBu +10dBu
Phone jack** RCA pin jack
MG124C 600 Lines +4dBu 10k Lines +4dBu 10k Lines 10k Lines 10k Lines +4dBu 0dBu -10dBV
Phone jack (TRS)*** Phone jack (TRS)*** Phone jack** RCA pin jack** Phone jack (TRS)*** Stereo phone jack** Phone jack (TRS)*** Phone jack (TRS)*** Phone jack (TRS)** RCA pin jack** Phone jack*** Stereo phone jack**
+20dBu TRS Phone jack** +24dBu Phone jack** +10dBV RCA pin jack**
10k Lines +4dBu 40k Lines 3mW MG102C 10k Lines 10k Lines 10k Lines 10k Lines 10k Lines 40k Lines +4dBu +4dBu 0dBu -10dBV +4dBu 3mW

DIMENSIONS

unit : mm

105 (102: MG206C)

MG124C, MG124CX
+10dBu Phone jack** RCA pin jack** +20dBu TRS Phone jack** +24dBu Phone jack** +10dBV RCA pin jack**

62.2 302.5

MG102C, MG82CX
Sensitivity is the lowest level that will produce the nominal output level when the unit is set to maximum level.

Yamaha MG102C

10-channel Compact Mixer
If you simply need to mix a few sources to stereo - but insist on the finest audio quality available - the MG10/2 is probably the way to go. It's compact and convenient to use, but won't compromise your signal in any way. With an optional adaptor the MG10/2 can even be mounted on a microphone stand for totally flexible positioning and easy access. For demo and music production in your personal studio, for band rehearsal or small sound reinforcement applications, or simply as a super utility mixer for any application, you can't lose with the MG10/2. The MG10/2 features a total of 10 input channels: two mono microphone/line inputs and four stereo line inputs, two of which offer mono microphone input capability. The four low-noise, high-precision mic Preamps provided on the two mono channels and two of the four stereo channels would be worth the price of the entire mixer if packaged separately. These are high-performance head amplifiers that will bring out the best in any dynamic or condenser microphone. All four preamps feature switchable phantom power. A single switch turns phantom power on or off for all four channels. Insert I/O Mono input channels feature insert I/O patch points so you can add compressors, EQ, or other extra signal-processing to the channels as required. 3-band Channel EQ & HPF Designed for smooth, ''musical'' response, the 3-band equalizers provided on all input channels are one more sonic tool you can use to create clean, professional mixes. All mono microphone input channels also feature a switchable highpass filter that can be used to cut out unwanted low-frequency noise. Two Aux Sends & Stereo Aux Return The MG10/2 is also full equipped to handle external effects and monitor systems. Use the post-fader auxiliary sends in conjunction with the stereo auxiliary returns to add reverb, delay, or other external effects to the mix, and the prefader sends to feed a separate mix to your monitor system. Yamaha MG10/2 - Features Stereo Aux Return 4 Phantom Pre-amps 3 Band Channel Eq 2 Aux Sends