New Functions in MOTIF6/MOTIF7/MOTIF8 Version 1.7
Yamaha has updated the rmware of the MOTIF6/MOTIF7/MOTIF8 as Version 1.7. This version provides the additional functions listed below.
Zone Switch setting in the Master mode
Owners Manual on page 270
In the previous version of the MOTIF, the Zone Switch setting (page 270) in the Master mode (page 268) was available only when the Mode is set to Voice or Performance. Version 1.7 lets you set the Zone Switch parameter also when the Mode is set to Song or Pattern. This means that you can use the MOTIF as a master keyboard for controlling up to four zones in the Song and Pattern modes as well (even when the tone generator block is set to Multi Timbral mode). This allows you to create powerful and versatile live performance setups by connecting another MOTIF or an external tone generator.
The ZoneSwitch setting is now available when Mode is set to Song or Pattern, in addition to Voice and performance.
Loading specic Performances from the Memory Card or a SCSI device connected to the MOTIF
Owners Manual on page 263
In the previous version, you could only load and save all 128 MOTIF Performances as a group. In the new version, the MOTIF lets you load a specic Performance from a le (which has been saved as All to internal memory).
n If the Performance you are loading has been assigned a user voice, the resulting sound may not be as expected. If this occurs, make sure that the appropriate user voice is also loaded.
"Performance" becomes available as the le type to be loaded. This type lets you load a specic Performance to the internal memory of the MOTIF.
Optional menu addition when converting from a Pattern Chain to a Song
Owners Manual on page 221
On the Convert to Song display in the Pattern Chain Edit mode, an optional menu item has been added, letting you determine whether Program Change messages are copied or not.
When the Meas is set to 001 or the destination song has no data:
When the box is not check marked:.The Pattern Mixing data at the earliest timing on the CHANGE display is copied or overwritten to the destination song and the program change of the pattern is entered to the top measure (specied at Meas) of the destination song. When the box is check marked:..The Pattern Mixing data at the earliest timing on the CHANGE display is copied or overwritten to the destination song and the program change of the pattern is not copied to the destination song.
When the destination song has data and the Meas is set to a value other than 001:
The Pattern Mixing and the program change are not copied from the Pattern Chain to the destination song regardless of the without PC setting.
Sequencer Remote Control function template additions/changes
Owners Manual on pages 65, 119, and 256
Support for the Yamaha SQ01 sequencer and the SONAR software program has been added to the remote control functions of the MOTIF. The available templates for the Sequencer Remote Control in the Utility mode have been changed as follows.
SQ01 is added. Cakewalk is changed to SONAR.
When the template is set to SQ01 the following functions can be controlled by the MOTIF.
These control the track selected via the NUMBER [1] - [16] buttons. Set via [CONTROL FUNCTION] Each parameters 1st row 2nd row 3rd row 4th row CS1 PAN PAN PAN PAN CS2 SEND1 EQLo Freq EQMidLo Freq EQHi Freq CS3 SEND2 EQLo Gain EQMidLo Gain EQ3Hi Gain CS4 SEND3 EQLo Q EQMidLo Q EQ3Hi Q Each parameters
SONAR2/Cakewalk ProAudio Ver9.0
When the template is set to SONAR, the following functions can be controlled by the MOTIF.
These control the track selected via the NUMBER [1] - [16] buttons. Set via [CONTROL FUNCTION] 1st row 2nd row 3rd row 4th row CS1 PAN ------CS2 SEND1 ------CS3 SEND2 ------CS4 SEND3 -------
These control the four tracks selected via the NUMBER [1] - [16] buttons. Selected tracks VOLUME (5th row) 1~4 5~~ ~ 16

SEQ TRANSPORT

These control the four tracks selected via the NUMBER [1] - [16] buttons. CS4 VOLUME4 VOLUME8 VOLUME12 VOLUME16
CS1 VOLUME1 VOLUME5 VOLUME9 VOLUME13
CS2 VOLUME2 VOLUME6 VOLUME10 VOLUME14
CS3 VOLUME3 VOLUME7 VOLUME11 VOLUME15
Selected tracks VOLUME (5th row) 1~4 5~~ ~ 16
CS4 VOLUME4 VOLUME8 VOLUME12 VOLUME16
These control PLAY, STOP, G, H of the computer sequence software. When the [MUTE] button on the MOTIF is turned on, the NUMBER [1] - [16] buttons control the track mute settings of the computer sequence software. When the [TRACK SELECT] button on the MOTIF is turned on, the NUMBER [1] - [16] buttons select the track of the computer sequence software.

Control PLAY, STOP, G, H of the computer sequence software. When the [MUTE] button on the MOTIF is turned on, the NUMBER [1] - [16] buttons control the track mute settings of the computer sequence software. When the [TRACK SELECT] buttons on the MOTIF is turned on, the NUMBER [1] - [16] buttons select the track of the computer sequence software.

TRACK MUTE TRACK SELECT

Additional Initialize parameter for song/pattern mixing GM
Owners Manual on page 212
GM (General MIDI) is added as a parameter to be initialized on the INIT display in the Song/Pattern Mixing mode. If the GM check box and the desired parts are marked, executing the Initialize will set the voice banks of the corresponding parts to the GM bank. This feature is convenient when you want to play a GM song that does not contain a GM On message.
Preset Plug-in Voices for PLG150-DR and PLG150-PC
Owners Manual on pages 35 and 43
The new version provides preset Plug-in Voices for the PLG150-DR and PLG150-PC, the Plug-in boards dedicated for drum/percussion sounds. Once these boards are installed, you can play the various drum and percussion sounds as if they were part of the MOTIF and even use them with the dynamic rhythm-related Arpeggio settings.
Receive Channel settings of the Plug-in parts in the Song/Pattern mode
Owners Manual on page 210
On this new version, the default values of the Receive Channel of the Single Plug-in Board in the Song/Pattern Mixing Edit mode (Part Edit mode) are 1, 2, and 3 for the Plug-in Slot 1, 2, and 3. This lets you play the Plug-in voice simply after entering the Song/Pattern mode and any of the NUMBER [1] - [3] buttons (the slot number to which the Plug-in board has been installed). Keep in mind that the voice of the internal part will also sound, so you should set the appropriate Receive Channel settings to off as desired.
Lamp on/off status of the [NUMBER] buttons when entering the Song/Pattern mode
In the previous version, when entering the Song/Pattern mode, both the [MUTE] button lamp and the [TRACK SELECT] button lamp were turned off. In the new version, the opposite is the case the [TRACK SELECT] button is turned on and the [MUTE] button is off, when the Song/Pattern mode is selected. In the Song/Pattern mode, you can use the [1] - [16] buttons to select the desired track and use the [INC/YES] button, [DEC/NO] button, and the data dial to select a song/pattern.
This document is printed on recycled chlorine free (ECF) paper with soy ink.
WA54260 209MWAP2.3-01B0 Printed in Japan

TOOLS for MOTIF6/MOTIF7/MOTIF8
Installation Guide/Installationshandbuch/Manuel dinstallation

English Franais Deutsch

SPECIAL NOTICES
The software and this Installation Guide are exclusive copyrights of Yamaha Corporation. Use of the software and this guide is governed by the SOFTWARE LICENSING AGREEMENT which the purchaser fully agrees to upon breaking the seal of the software packaging. (Please read carefully the AGREEMENT at the end of this guide before installing the application.) Copying of the software or reproduction of this guide in whole or in part by any means is expressly forbidden without the written consent of the manufacturer. Yamaha makes no representations or warranties with regard to the use of the software and documentation and cannot be held responsible for the results of the use of this guide and the software. Copying of the commercially available music data is strictly prohibited except for your personal use. The company names and product names in this Installation Guide are the trademarks or registered trademarks of their respective companies. Future upgrades of application and system software and any changes in specications and functions will be announced separately.

BESONDERE HINWEISE

Dieses Programm und diese Installationsanleitung sind im Sinne des Urheberrechts alleiniges Eigentum der Yamaha Corporation. Die Benutzung des Programms und dieser Anleitung unterliegt der SOFTWARE-LIZENZVEREINBARUNG, mit der sich der Erwerber durch ffnen des Siegels der Programmverpackung uneingeschrnkt einverstanden erklrt. (Bitte lesen Sie die VEREINBARUNG am Ende dieser Anleitung vor Installation der Anwendung sorgfltig durch.) Das Kopieren der Software und die Reproduktion dieser Anleitung, in welcher Form auch immer, in Teilen oder als Ganzes, sind nur mit schriftlicher Genehmigung des Herstellers erlaubt und sonst ausdrcklich verboten. Yamaha leistet keinerlei Garantie hinsichtlich der Benutzung des Programms und der zugehrigen Dokumentation und bernimmt keine Verantwortung fr die Ergebnisse der Benutzung dieser Anleitung oder des Programms. Das Kopieren im Handel erhltlicher Musikdaten ist nur fr Ihren Privatgebrauch zulssig und sonst streng untersagt. Die in dieser Installationsanleitung erwhnten Firmen- und Produktnamen sind Warenzeichen bzw. eingetragene Warenzeichen der betreffenden Firmen. Zuknftige Aktualisierungen von Anwendungs- und Systemsoftware sowie jede nderung der technischen Daten und Funktionen werden separat bekanntgegeben.

REMARQUES PARTICULIERES

Les droits dauteurs (copyright) de ce logiciel et de ce manuel dinstallation appartiennent exclusivement Yamaha Corporation. Lusage de ce logiciel et de ce manuel est dni par laccord de licence auquel lacheteur dclare souscrire sans rserve lorsquil ouvre le sceau de lemballage du logiciel. (Veuillez donc lire attentivement laccord de licence du logiciel situ la n de ce manuel avant dinstaller le logiciel.) Toute copie du logiciel et toute reproduction totale ou partielle de ce manuel, par quel moyen que ce soit, est expressment interdite sans lautorisation crite du fabricant. Yamaha noffre aucune garantie en ce qui concerne lutilisation du logiciel et de la documentation. Yamaha ne peut en aucun cas tre tenu responsable des dommages ventuels rsultant de lutilisation de ce manuel et de ce logiciel. Toute copie de donnes musicales commercialises est formellement interdite, sauf pour usage personnel. Les noms des rmes et des produits apparaissant dans ce manuel dinstallation sont des marques commerciales ou des marques dposes appartenant leurs dtenteurs respectifs. Les remises jour du programme et du systme ainsi que toute modication des caractristiques et fonctions seront annonces sparment.
Important Notices about the CD-ROM

Data Types

This CD-ROM includes two types of data: application software and sampled audio data. Please refer to pages 4 (Windows) and 9 (Macintosh) for software installation instructions, and page 14 for the audio contents. These applications allow you to edit MOTIF data and transfer data between your computer and the MOTIF. You can import the audio data from an audio CD player (or any CD playing/ripping function on your computer) to the MOTIF via its INPUT jacks. For detailed information, refer to the MOTIF Owners manual. The application software is contained on track 1 (as recognized on an audio CD player), and the sampled audio data is contained in the subsequent tracks.

Never attempt to play back track 1 (containing the application software) on an audio CD player. Doing so may result in damage to your hearing as well as to your CD player/audio speakers.

English

Operating System (OS)
The applications in this CD-ROM are provided in versions for both Windows and Macintosh operating systems. The installation procedure and the applications themselves differ depending on the operating system that you are using. Please refer to the appropriate installation instructions. Windows Read page 4. Macintosh Read page 9.

Media format

The MOTIF6/MOTIF7/MOTIF8 and the File Utility software are compatible with the following format media. MS-DOS CD-ROM with ISO9660 n The MOTIF and File Utility cannot copy contents of CD-ROM supplied with Yamaha A5000/4000/3000. n If a read-only le is copied to the Memory card in the MOTIFs card slot or the SCSI device connected to the MOTIF, the le cannot be deleted from the MOTIF. n The MOTIF cannot directly read the contents of the included CD-ROM. The CD-ROM is intended for use only with a computer.

For Windows Users

Contents of the CD-ROM
The CD-ROM contains a variety of applications (with installers) and data in the following folders.
Folder Name Acroread_ Tools VEMOT_ FU_ TWE USBdrv_ USBdrv2k_ Seq_Demo Application Name Acrobat Reader* Voice Editor for MOTIF6/MOTIF7/MOTIF8 File Utility YAMAHA Wave Editor TWE V2.3 YAMAHA USB MIDI Drivesr (for Win 98, Me) YAMAHA USB MIDI Driver (for Win 2000, XP) Cubase VST/32 Demo Version* Contents PDF (Portable Document Format) viewer. Enables you to view each PDF manual for the applications. Enables you to edit the MOTIF voices on your computer. Enables you to manage les in the Memory card in the card slot on the MOTIF or in the SCSI device connected to the MOTIF. Enables you to edit the audio (wave) data on your computer and transfer it between the computer and the MOTIF. Enables your computer to communicate with the MOTIF when your computer and the MOTIF are connected using a USB cable. Enables your computer to communicate with the MOTIF when your computer and the MOTIF are connected using a USB cable. Demo version of the sequence software Cubase VST/32.
* Unfortunately, Yamaha makes no guarantee concerning the stability of these programs (marked with *) nor can it offer user support for them. All the applications listed above are supplied with online/PDF manuals.All the applications listed above are supplied with online/PDF manuals. You can start the Voice Editor for MOTIF6/MOTIF7/MOTIF8 or File Utility software as either a stand-alone software or a plug-in application in the Open Plug-in Technology compatible application. Refer to the owners manual of the client application (sequencer, etc.) for details on using the Voice Editor for MOTIF6/MOTIF7/MOTIF8 or File Utility as a plug-in software. Folder Name Remote Cubase Logic Sonar Voice List File Name Setup le for Cubase Setup le for Logic Setup le for SONAR/Cakewalk ProAudio Normal Voice List Drum Voice List Performance List Contents Contains settings for controlling Cubase on your computer from the MOTIF. Contains settings for controlling Logic on your computer from the MOTIF. Contains settings for controlling SONAR and Cakewalk on your computer from the MOTIF. Normal Voice List for the MOTIF Drum Voice List for the MOTIF Performance List for the MOTIF

Uninstall (Removing the installed applictaion)
You can remove the installed applictaion software. Select [START] [Settings] [Control Panel] [Add/Remove Programs] [Install/Uninstall], then select the application to be removed and click [Add/Remove.]. Follow the on-screen instructions to uninstall the application. n The button names or menus may differ depending on the computer OS.

Windows 98

Acrobat Reader
In order to view the electronic (PDF) manuals included with each application, youll need to install Acrobat Reader. n If an older version of Acrobat Reader is installed on your PC, youll need to uninstall it

before proceeding.

Windows Me
1 Double-click on the Acroread_ folder. Four different language folders will be displayed. 2 Select the language you want to use and double-click on its folder. The le ar***.exe le will be displayed. (*** indicates the selected language.) 3 Double-click on ar***.exe. Acrobat Reader Setup Dialog box will be displayed. 4 Execute the installation by following the on-screen directions. After installation is complete, the Acrobat folder appears on your PC (in Program Files, as the default). For information on using the Acrobat Reader, refer to the Reader Guide in the Help menu.
4 Click [Next]. The window below enables you to select the search method.
8 When the installation is complete, the following screen appears. Click [Finish]. n Some computers may take about ten seconds to show this screen after the installation

is complete.

5 Check the radio button to the left of Search for the best driver for your device. (Recommended). Click [Next]. The window below enables you to select a location in which to install the driver.
The driver has been installed. 6 Check the CD-ROM drive box and uncheck all other items. Click [Next]. n The system may ask you to insert a Windows CD-ROM while it checks for the driver.
Specify the USBdrv_ directory of the CD-ROM drive (such as D:\USBdrv_\) and continue the installation.
Installing the driver on a Windows 2000 system
1 Start the computer and use the Administrator account to log into Windows 2000. 2 Select [My Computer | Control Panel | System | Hardware | Driver Signing | File Signature Verication], and check the radio button to the left of Ignore -Install all les, regardless of le signature and click [OK]. 3 Insert the included CD-ROM into the CD-ROM drive. 4 Make sure the POWER switch on the MOTIF is set to OFF and use the USB cable to connect the USB terminal of the computer (or the USB hub) to the USB terminal of the MOTIF. When the MOTIF is turned on, the computer automatically displays the Found New Hardware Wizard. Click [Next]. 5 Check the radio button to the left of Search for a suitable driver for my device. (Recommended). Click [Next]. The window that appears enables you to select a location in which to install the driver. 6 Check the CD-ROM drives box and uncheck all other items. Click [Next]. n The system may ask you to insert a Windows CD-ROM while it checks for the driver.

Specify the USBdrv2k_ directory of the CD-ROM drive (such as D:\USBdrv2k_\) and continue the installation.
n When using the Windows 98, specify the USBdrv_ directory of the CD-ROM drive
(such as D:\USBdrv_\) and continue the installation.
7 When the system detects the driver on the CD-ROM and is ready for installation, it displays the following screen. Make sure that the YAMAHA USB MIDI Driver is listed, and click [Next]. The system starts the installation.
7 When the installation is complete, the system displays Completing the Found New Hardware Wizard. Click [Finish]. n Some computers may take about ten seconds to show this screen after the installation
8 Restart the computer. The driver has been installed.
Installing the driver on a Windows XP system
1 Start the computer. 2 Select [Start] [Control Panel]. If the control panel appears as shown below, click Switch to Classic View in the upper left of the window. All control panels and icons will be displayed.
With the TWE audio editing software, you can edit wave data directly on your computer. 1 Double-click on the TWE folder. Four different language folders will be displayed. 2 Select the language that you want to use and double-click on its folder. The YAMAHA TWE folder will be displayed. 3 Copy the YAMAHA TWE folder onto the desktop of your computer. For details on operation, refer to the PDF manual provided in the folder.
Setup Files for remote control of sequencing software
To use these les, the appropriate sequencing software should be installed to your computer.
3 Go to [System] [Hardware] [Driver Signing] [File Signature Verication], and check the radio button to the left of Ignore -Install all les, regardless of le signature and click [OK]. 4 Click the [OK] button to close System Properties, and then click X in the upper right of the window to close the Control Panel. 5 Insert the included CD-ROM into the CD-ROM drive. 6 Make sure the POWER switch on the MOTIF is set to OFF and use the USB cable to connect the USB terminal of the computer (or the USB hub) to the USB terminal of the MOTIF. When the MOTIF is turned on, the computer automatically displays the Found New Hardware Wizard. 7 Check the radio button to the left of Search for a suitable driver for my device. (Recommended). Click [Next]. The system starts the installation. 8 When the installation is complete, the system displays Completing the Found New Hardware Wizard. Click [Finish]. n Some computers may take about ten seconds to show this screen after the installation

Setup Files for Cubase

1 Start Cubase. 2 Select Option from the menu bar and select Setup in Remote Setup. 3 Set the value in the VST Remote window called up via step #2 as illustrated below, and click the [OK] button.
Remote: Generic Remote Input: YAMAHA USB IN 0-3 Output: YAMAHA USB OUT 0-3
n If the MOTIF is connected to the computer via MIDI, set the port to 1. 4 Click the [EDIT] button in the Generic Remote window called up via step#3. 5 Click the [Import] button in the Generic Remote Setup called up via step#4.
9 Restart the computer. The driver has been installed. 6 Select the Setup le for remote control of Cubase (Yamaha MOTIF Remote.xml) in the dialog opened via step #5 and click the [Open] button.
Voice Editor, File Utility
Once youve installed these software programs, you can use your computer to edit the voices of the MOTIF as well as access and organize data stored to media connected to the MOTIF (Memory card and SCSI devices).
1 Double-click on the Tools folder in the CD-ROM.
The VEMOT_ folder, FU_ folder and TWE folder will be displayed. 2 Double-click on the VEMOT_ folder or FU_ folder. setup.exe le will be displayed. 3 Double-click on the setup.exe le. The Voice Editor or the File Utility Tools setup dialog will be displayed. 4 Execute the installation by following the on-screen directions. n When installing the above software, make sure to install the MIDI Setup program rst. For details, refer to the each on-line Help or the each PDF owners manual. 7 Close the Generic Remote Setup window.
Preference File for Logic
1 Start Logic. 2 Select Key Commands. in Settings from the Option menu. 3 Select Import Key Commands. from the Option menu in the Key Commands window called up via step #2. 4 In the dialog window called up via step #3, select a preference le for Logic named Logic32.prf in the included CD-ROM and click [Open]. After importing the le, the following setup appears.
When you change the track structure from the template setting.
1 Click the [CONFIG] button in the Panel window (above). 2 Set the rst track number of the MIDI tracks by using the [SET MIDI First Track] knob. When this template is used, the MIDI tracks should be arranged in numerical order. Otherwise, you cannot control Cakewalk ProAudio from the MOTIF. If you set the rst track number to an unused track number, the knobs, buttons, and sliders on the window may be grayed out. In this case, set the rst track number to the rst available track containing data.

Pro Tools

Cubase VST/32 Demo version
1 Double-click on the Seq_Demo folder. The Cubase folder will be displayed. Please note that the Key Command settings are replaced with the selected preference le.

2 Double-click on the Cubase folder. The Cubase_VST/32_Demo_50.exe le will be displayed. 3 Double-click on the Cubase_VST/32_Demo_50.exe le.
Template for SONAR/SONAR2/Cakewalk ProAudio (Installation)
1 Copy the template le from the CD-ROM to the folder where the SONAR/ SONAR2/Cakewalk ProAudio are installed. 2 Start SONAR/SONAR2/Cakewalk ProAudio. 3 Select Option from the menu bar and select Audio. The Direct Show Audio (Cakewalk Direct Show Audio) dialog will be displayed. 4 Set the text box Number of Aux Busses to 3 (default setting is 2.) and click [OK]. The setup for loading a template has been installed.
4 Execute the installation by following the on-screen directions.
MIDI port setting (when starting the software as a stand-alone application)
Before setting the MIDI port on the Voice Editor or File Utility, you should set the MIDI port from the MIDI SETUP toolbar. n When you start the Voice Editor or File Utility as a plug-in application in the Open Plug-in
Technology compatible application, refer to the the PDF manual for the respective software.
Template for SONAR/SONAR2/Cakewalk ProAudio (Importing)
1 Start SONAR/SONAR2/Cakewalk ProAudio. 2 Select Open (SONAR)/New (Cakewalk) from the File menu. The Open/New Project File dialog will be displayed. 3 Select the Cakewalk Template from the Files of type menu (when you are using the SONAR), then select Yamaha MOTIF Synthesizer from the dialog list and click [OK]. The template will be imported and the three windows (Track window, Control window, and Panel window) will be displayed. The setup has been completed and you can control SONAR/SONAR2/ Cakewalk ProAudio from the MOTIF. n Select MIDI Devices. from the Option menu to open the MIDI Ports window. From
this window, set Input Ports to YAMAHA USB IN 0-3. If the MOTIF is connected to the computer via MIDI, set Input Ports to 1 (for example, IN 0-1).
1 Start the Voice Editor or File Utility. 2 Click the MIDI Setup button in the Toolbar called up via step #1.

MIDI Setup button

3 In the MIDI Setup window called up via step#2, click the [] button at the right end of each box and make the port settings as shown. n In order for MIDI ports to be available here, youll need to select the relevant MIDI
port within each application software (Voice Editor or File Utility). This is the port that youll use in the various software. For details on setting the MIDI port, refer to the on-line manual of each software.

The special setup le is not necessary for using Pro Tools. You can control Pro Tools from the MOTIF by changing settings on the Pro Tools. The method for setting up is the same as on the Macintosh. See page 11.

For Macintosh Users

The CD-ROM includes two folders: International and Japanese. Double-click on the International folder to open it. A variety of applications (with installers) and data are contained in the following folders.

Folder Name

ACROBAT OMS

Application Name

Acrobat Reader* Open Music System (OMS)* OMS Setup for YAMAHA

Contents

PDF (Portable Document Format) viewer. Enables you to view each PDF manual for the applications Enables you to use several MIDI applications on the Mac OS. Contains the OMS Setup les for the Yamaha MOTIF. Enables your computer to communicate with the MOTIF when your computer and the MOTIF are connected using a USB cable. Enables you to edit the MOTIF voices on your computer. Enables you to manage les in the Memory card in the card slot on the MOTIF or in the SCSI device connected to the MOTIF. Enables you to edit the audio (wave) data on your computer and transfer it between the computer and the MOTIF. Demo version of the sequence software Cubase VST 5.0. Demo version of the sequence software Logic Audio Platinum 4.6.

USBdrv_ Tools

YAMAHA USB MIDI Driver Voice Editor for MOTIF6/MOTIF7/MOTIF8 File Utility YAMAHA Wave Editor TWE V2.3

Seq_Demo

Cubase VST 5.0 Demo Version* Logic Audio Platinum 4.6 Demo*
* Unfortunately, Yamaha makes no guarantee concerning the stability of these programs (marked with *) nor can it offer user support for them. All the applications listed above are supplied with online/PDF manuals. OMS and are trademarks of Opcode Systems, Inc.

Remote

File Name
Setup le for Cubase Setup le for Logic
Contains settings for controlling Cubase on your computer from the MOTIF. Contains settings for controlling Logic on your computer from the MOTIF. Normal Voice List for the MOTIF Drum Voice List for the MOTIF Performance List for the MOTIF

Voice List

Normal Voice List Drum Voice List Performance List
The system requirements below may differ slightly depending on the particular operating system. Voice Editor for MOTIF6/MOTIF7/MOTIF8 OS: Mac OS 8.6 through OS 9.22 (Mac OS X is not supported) Computer: A Macintosh computer with a PowerPC or later CPU Available Memory: 16 MB or more Hard Disk: 40 MB or more Display: 800 x 600, 32,000 colors or more File Utility OS: Computer: Available Memory: Hard Disk: Display: Other: TWE V2.3 OS: Computer: Available Memory: Hard Disk: Display: USB MIDI Driver OS: Computer: Memory:
Mac OS 7.6.1 through OS 9.22 (Mac OS X is not supported) A Macintosh computer with a PowerPC or later CPU 8 MB or more Average access time 30 ms or less 640 x 400, 256 colors or more

Mac OS 8.5 through OS 9.22 (Mac OS X is not supported) A Macintosh computer with a USB connector and a PowerPC or later CPU 64 MB or more (128 MB or more is recommended)
nTurn off virtual memory. Hard disk: Other: 2 MB or more OMS 2.3.8 (included in the CD-ROM in the package)
Open Music System (OMS) 2.3.8
In order to view the electronic (PDF) manuals included with each application, youll need to install Acrobat Reader. 1 Double-click on the ACROBAT folder. Three different language folders will be displayed: English, German and French. 2 Select the language you want to use and double-click on its folder. Reader Installer will be displayed. The Installer name may differ depending on the language you select. 3 Double-click on the Reader Installer. Acrobat Reader Setup Dialog will be displayed. 4 Execute the installation by following the directions appearing on the screen. After installation is complete, the Acrobat folder appears on your computer (in Hard Disk, as the default). For information on using the Acrobat Reader, refer to the Reader Guide in the Help menu.
OMS allows you to use several MIDI applications on the Mac OS at the same time. 1 Double-click on the OMS folder (English version only). Install OMS 2.3.8 will be displayed. 2 Double-click on Install OMS 2.3.8. OMS Setup Dialog will be displayed. 3 Execute the installation by following the on-screen directions. After the installation, select Restart. n After the installation is complete, you may possibly encounter an error message
warning that the installer did not close. In this case, go to the File menu and select Quit to close the installer. Then reboot the computer.
After restarting the Macintosh, you will nd the Opcode/OMS Applications folder on your computer (Hard Disk, as the default). 4 Copy the OMS_2.3_Mac.pdf in the CD-ROM to the OMS Applications folder (drag-and-drop it to the folder). Refer to the OMS_2.3_Mac.pdf (English version only) how to use the application. 5 Copy the OMS Setup for YAMAHA in the CD-ROM to the OMS Applications folder (drag-and-drop it to the folder). In the OMS Setup for YAMAHA folder you will nd the OMS Setup les for the Yamaha tone generators, which can be used as templates.
Mac OS 8.0 through OS 9.22 (Mac OS X is not supported) A Macintosh computer with a PowerPC or later CPU 6 MB or more 4 MB or more (except for OMS) 640 x 480, 256 colors or more OMS 2.3.8 (included in the CD-ROM in the package)

7 When the installation is complete, the system displays the following message: Installation was successful. You have installed software which requires you to restart your computer. Click [Restart]. The computer automatically restarts. You can locate the installed les in the following locations: System Folder | Control Panels | YAMAHA USB MIDI Patch System Folder | Extensions | USB YAMAHA MIDI Driver System Folder | OMS Folder | YAMAHA USB MIDI OMS Driver
PAN CUTOFF REVERB RESONANCE ASSIGN B CHORUS ATTACK ASSIGN 1 TEMPO RELEASE ASSIGN 2

KNOB CONTROL FUNCTION

ASSIGN A

REMOTE CONTROL ON/OFF

MUSIC PRODUCTION SYNTHESIZER
Integrated Sampling Sequencer Real-time External Control Sur face Modular Synthesis Plug-in System
KN 1 MEQ LOW KN 2 KN 3 KN 4

MEQ HIGH

SLOT 1

SLOT 2

SLOT 3

MEQLOWMID MEQ HI M ID

EFFECT BYPASS

INSERTION SYSTEM

ARPEGGIO

ON/OFF

PERFORM

MASTER

DRUM KITS

CATEGORY SEARCH

MASTER VOLUME

VOLUME 1

VOLUME 2

VOLUME 3

VOLUME 4

FAVORITES

A. PIANO

KEYBOARD

SEQUENCER

SONG PATTERN FILE

COMMON

GUITAR / PLUCKED

STRINGS

REED/PIPE

SECTION

SEQ TRANSPORT

INTEGRATED SAMPLING

DEC/NO

INC/YES

SYN LEAD

SYN PAD/ CHOIR

SYN COMP

DRUM / CHROMATIC PERCUSSION PERCUSSION

MUSICAL FX

MIXING

UTILITY

SONG SCENE SF 1 SF2 SF3 SF4 SF5

INFORMATION

TRACK SELECT

LOCATE

ELEMENT/ PERF.PART / ZONE

NUMBER

EDIT JOB STORE

COMPARE

OCTAVE

DOWN UP

SCENE STORE SET LOCATE

EXECUTE

Voice Editor, File Utility, MIDI Setup

ZONE 1

ZONE 2

ZONE 3

ZONE 4
First install OMS before you install the USB-MIDI driver. Also, after installing the driver, you will need to set up OMS (above). 1 Start the computer. 2 Insert the included CD-ROM into the CD-ROM drive. The system displays the CD-ROM icon on the desktop. 3 Double-click the CD-ROM icon and double-click the Install USB Driver icon in the USBdrv_ folder to display the following installation screen.

Once youve installed these software programs, you can use your computer to edit the voices of the MOTIF as well as access and organize data stored to media connected to the MOTIF (Memory card and SCSI devices). 1 Double-click on the Tools folder in the CD-ROM. Motif folder and TWE folder will be displayed. 2 Double-click on the Motif folder. Install File Utility and Install Voice Editor for MOTIF6 le will be displayed. 3 Double-click on the Install File Utility le. The File Utility installation dialog will be displayed. Execute the installation by following the on-screen directions. 4 After installing the File Utility, double-click on the Install Voice Editor for MOTIF6 le. The Voice Editor installation dialog will be displayed. Execute the installation by following the on-screen directions. 5 After installing, restart the computer. For details, refer to the on-line Help or the PDF owners manual.
4 The Install Location box displays the destination of the installation. If you wish to change the destination disk or folder, use the [Switch Disk] button and the pop-up menu to specify the desired destination. n This box usually displays the start-up disk as the destination. 5 Click the [Install] button. The system displays the following message: This installation requires your computer to restart after installing this software. Click Continue to automatically quit all other running applications. Click [Continue]. n To cancel the installation, click [Cancel]. 6 The installation starts. If the driver has already been installed, you will receive the following message. To return to step 3, press [Continue]. To complete the installation, click [Quit].
With the TWE audio editing software, you can edit wave data directly on your computer. 1 Double-click on the TWE folder. Four different language folders will be displayed. 2 Select the language that you want to use and double-click on its folder. The YAMAHA TWE folder will be displayed. 3 Copy the YAMAHA TWE folder to the hard disk of your computer. For details on how to use TWE, refer to the on-line manual provided in the folder.
Cubase VST 5.0 Demo version
1 Double-click on the Seq_Demo folder. The Cubase folder will be displayed.
2 Double-click on the Cubase folder. The Cubase VST 5.0 DEMO Installer will be displayed. 3 Double-click on the Cubase VST 5.0 DEMO installer le. 4 Execute the installation by following the on-screen directions.

#1 CS-10

Receive From

YAMAHA USB IN 0-3

Send to

YAMAHA USB OUT 0-3

n If the MOTIF is connected to the computer via MIDI, set the port to 1. The setup has been completed and you can control Pro Tools from the MOTIF.
6 After starting the OMS Setup, the Studio setup le double-clicked in step #5 opens.
Indicates this setup is available
For Windows/ Macintosh Users
About USB Driver Setup window
From this window, you can change the MIDI port number transmitted to the MOTIF from the one set in the computer sequence software. The default settings are as follows. Port number MIDI OUT terminal (Thru Port number*)
MIDI OUT (1) MIDI OUT (2) MIDI OUT (3) MIDI OUT (4) MIDI OUT (5) MIDI OUT (6) MIDI OUT (7) MIDI OUT (8)
MIDI IN terminal (Track Port number)
MIDI IN (1) MIDI IN (2) MIDI IN (3) -
When opening MOTIF-USB_multi:
is not indicated at the right of the setup le name, select Make Current from the File menu and execute the save operation.
The OMS studio setup has been completed. n After the OMS studio setup above has been completed, your computer will recognize
only the MOTIF as a MIDI instrument. If you use another MIDI instrument in addition to the MOTIF or you add a second MOTIF to the existing system, you should create an original Studio Setup le. For details, refer to the on-line manual supplied with the OMS.
n The included OMS studio setup le may not function even if you follow the above
procedure, depending on your Macintosh/Mac OS version. (MIDI data cannot be transmitted/received even if the setup becomes available.) In this situation, connect your Macintosh to the MOTIF via the USB cable and follow the procedure below to re-create the setup le. 1 Start OMS Setup and select New Setup from the File menu. 2 The OMS Driver Search dialog appears. Remove the check from the Modem and Printer check boxes, and click [Search] to execute the device search. If the Search operation has been completed successfuly, the [USB-MIDI] device is displayed in the OMS driver setting dialog. 3 Click the [OK] button to search for ports. Port 1, Port 2. appears in the dialog. Mark the appropriate checkbox of the port and click the [OK] button to store the setting.
* This is actually the MIDI port number set from the MIDI/OTHER display in the Utility mode.
For details about how to use OMS, refer to OMS2.3J_Manual.pdf supplied with OMS.

Troubleshooting

The driver cannot be installed.
Is the USB cable connected correctly? Check the USB cable connection. Disconnect the USB cable, then connect it again. [Windows] Is the USB function enabled on your computer? When you connect the MOTIF to the computer for the rst time, if the Add New Hardware Wizard does not appear, the USB function on the computer may be disabled. Perform the following steps. 1 Double-click System in the Control Panel to open the System Properties window. 2 Double-click the Device Manager tab and make sure that no ! or x marks appear at Universal serial bus controller or USB Root Hub. If you see an ! or x mark, the USB controller is disabled. For more information, refer to the owners manual of your computer. [Windows] Is any unknown device registered? If driver installation fails, the MOTIF will be marked as an Unknown device, and you will not be able to install the driver. Delete the Unknown device by following the steps below. 1 Double-click System in the Control Panel to open the System Properties window. 2 Double-click the Device Manager tab. With the View devices by type check box checked, look for Other devices. 3 If you nd Other devices, double-click it to extend the tree to look for Unknown device. If one appears, select it and click the [Remove] button. 4 Remove the USB cable from the MOTIF, and make the connection again. 5 Install the driver again.

from X-Static Goldmine 1 Track No. Track 2 106BPM DEMO 94.5BPM DEMO LEFT LOOP 01 LOOP 03 LOOP 05 OPEN HH WET ARP ORG CHD FLUT FX B-LOOP DRM 01 DRM 03 DRM 05 DRM 07 DRM 09 DRM 11 RIGHT LOOP 02 LOOP 04 LOOP 06 PIANO FX ACID SYN FUZZ GTR FL.PAD BASS DRM 02 DRM 04 DRM 06 DRM 08 DRM 10 DRM 12

English Deutsch Franais

Track No. Track 10 Track 11 Track 12 Track No. Track 13 Track 14 Track 3 Track No. Track 15 Track 16 Track 17 Track No. Track 18 Track 19 Track 20 Track 21
from X-Static Goldmine 4 Track No. Track 5 100BPM TRANCE-FORM BREAKS SYNTH & EFFECTS 7 Track 5 84BPM DUBBY TRIP HOP GUITAR+BR.BEAT+SYN 7 LEFT LOOP 01 LOOP 02 LOOP 03 LOOP 04 LOOP 05 LOOP 06 LOOP 07 RIGHT B-FX LP AXE LP1 DUB LP AXE LP2 DUB LP AXE LP3 STN-FX2 LEFT LOOP 01 LOOP 03 LOOP 05 LOOP 07 LOOP 09 LOOP 11 LOOP 13 RIGHT LOOP 02 LOOP 04 LOOP 06 LOOP 08 LOOP 10 LOOP 12 LOOP 14
LEFT LOOP 01 LOOP 03 LOOP 05 BASS SLID EP BELL BREATH B-LOOP DRM 01 DRM 03 DRM 05 DRM 07 DRM 09 DRM 11
RIGHT LOOP 02 LOOP 04 LOOP 06 FLUTE SYN MOVE CHIMES FX CONG BASS DRM 02 DRM 04 DRM 06 DRM 08 DRM 10 DRM 12

from XTcFILES OF HOUSE

DEMO 8 BAR -Mushy DEMO 8 BAR -Moody Boys DEMO 4 BAR -Tribal
3 Lps -124BPM 3 Lps -127BPM 4 Lps -130BPM
2 Pian Chd -house dits Stab+Sweeper -organ? -dreamy Orgn Chd -Deep
2 Fx 4 Drms -vocals - bd/hh/oh/oh 8 Drms -bd/bd/hh/timbale/hh/sd/sd/sd 4 Drms -clp/sd/rim/rim
from STRiCTLY HOUSE BPM Groovin LoFi Extend Lp + 4 Dr + 1 Lp Extend Lp + 2 Dr

from XTcFILES OF TECHNO

DEMO 16 BARS -CloneBone DEMO 16BARS -Da 3TB7s Ride 134 DEMO 8 BARS -Yans getting Phoney
2 Lps -134BPM 3 Synts -dit/wood/sub.buzz 2 Lps -132BPM
2 Synts -Tron/Revers 5 Drms -bd/clp/hh/oh/sh 4 Synts -dit/pian/phon/dit
7 Drms -bd/clp/hh/hh/oh/tmbr/belltr.

3 Drms -bd/hh/hh

from XTcFILES OF JUNGLE
6DrLps -Deep State Loops & Samples Xtended Drum Loop -159BPM -Funk Stop Xtended Drum Loop -154BPM -Jazz Club Xtended Drum Loop -163BPM -Shake & Roll
1 B.Lp Lp 1 -8 Bars Lp 1 -4 Bars Lp 1 -8 Bars
1PadLp -159BPM Lp 2 -8 Bars Lp 2 -8 Bars Lp 2 -4 Bars
4BsTns Lp 3 -8 Bars Lp 3 -4 Bars Lp 3 -4 Bars

1BelPd

Lp 4 -8 Bars
from VINILISTICS 3 Track No. Track 22 SHAKE LOOP -89BPM 8 Bars Loops BD1 SD2 HH3
from STRiCTLY HIPHOP Track No. Track 23 Track 24 Track 25 Track 26 Crispy Hectic Hats Bite Back Funk BPM 94.3 Lps/10br 8 Lps/16br 3 Lps/10br 3 Lps/10br 3 drms 4 drms 3 drmsp 3 drms
from XTcFILES OF HIPHOP Track No. Track 27 DEMO -Sloppy 1 Lp -84BPM 3 Drms -bd/sd/hh E-piano -crackle Chrd Piano -ballad Bass Lp -reverse
from STRiCTLY RNB Track No. Track 28 MineField from YAMAHA R&B Hip Hop Phrases Direction, Demo, Keyboards: Takashi Morio Drums : Yoshio Kishida Bass : LEWTA SAKAMOTO from ALIENS ARE. Guitar: Masaaki Okabayashi (Yamaha) Demo, 10 Drms, 7 Bs, 1 EP, 1 Org, 3 Cym Demo, 8 Drms, 4 Bs, 8 Gt, 1 EP, 1 Clavi, 1 Cym, 1 Clp Demo, 11 Drms, 4 Bs, 16 Gt, 6 SynBrss, 2 Pno, 3 Cym, 1 Cowbell Demo, 10 Drms, 10 Bs, 16 Gt, 7 Org, 1 Tamb, 2 Cym Direction&Guitar : Junki Kawauchi (The Triple X) Drums : Atsuo Okamoto (The Triple X) Bass : Toshiyuki Fukushima (The Triple X) 3 Drms Gt:C7 Ba:C7 Gt:Cm Ba:Cm Gt:Eb9 Ba:Eb Gt:Gm7 Ba:Gm 12 Drms Gt:Gm-GonB Ba:Am-GonB Gt:C-D Ba:C-D Gt:D Ba:D Gt:E Ba:E Gt:E Ba:E Gt:Riff Ba:Riff Gt:Riff Ba:Riff Gt:Riff Ba:Riff Gt:Riff Ba:Riff Gt:Riff Ba:Riff Gt:Single Note Phrase Ba:Single Note Phrase Gt:Single Note Phrase Ba:Single Note Phrase 5 Drms Gt:Am-G Ba:A-G Gt:Am Ba:A Gt:Bb Ba:Bb Gt:C Ba:C 7 Drms Gt:E Ba:E Gt:A Ba:A 2 Drms Gt:E Ba:E Gt:G Ba:G Gt:C Ba:C 5 Drms Gt:Unison Ba:Unison Gt:Am Ba:A Gt:Am Ba:A Gt:D Ba:D 4 Drms Gt:C Ba:C Gt:C Ba:C Gt:G Ba:G Gt:G Ba:G Gt:Riff Ba:Riff Gt:Riff Ba:Riff 8 Drms Gt:Am Ba:A Gt:Am Ba:A Gt:Dm Ba:D Gt:Dm Ba:D Gt:E7 Ba:E Gt:E7 Ba:E BPM Lps/12br + 4 drms

Track 29 Track 30 Track 31 Track 32
Slow 8 Disco! Funky 8 Groovy from YAMAHA Rock Phrases

110 108

Track 33 Track 34

Blues Speed 8

65 145
Track 35 Track 36 Track 37 Track 38 Track 39 Track 40
Medium 8 70s -1 70s - 2 Shufe 16 80s Latin

125 126

Address: Phone: Fax: Home Page: Email:
e-LAB, BYGGMASTAREGATAN 5, BORRBY, SWEDEN Int +46-411-02 Int +46-411-20 <www.e-lab.se> info@e-lab.se
Unauthorized reselling, copying, hiring, renting, public performance and broadcasting of this CD is prohibited. Purchase of this product entitles the purchaser to use the audio material featured in their music, not for the creation of any competitive product. All data are for personal use only - any commercial use should be checked with e-LAB.
SOFTWARE LICENSING AGREEMENT
The following is a legal agreement between you, the end user, and Yamaha Corporation (Yamaha). The enclosed Yamaha software program is licensed by Yamaha to the original purchaser for use only on the terms set forth herein. Please read this licensing agreement with care. Opening this package indicates that you accept all terms outlined herein. If you do not agree to the terms, return this package unopened to Yamaha for a full refund.
1. GRANT OF LICENSE AND COPYRIGHT
Yamaha grants you, the original purchaser, the right to use one copy of the enclosed software program and data (SOFTWARE) on a single-user computer system. You may not use it on more than one computer or computer terminal. The SOFTWARE is owned by Yamaha and is protected by Japanese copyright laws and all applicable international treaty provisions. You are entitled to claim ownership of the media in which the SOFTWARE is included. Therefore, you must treat the SOFTWARE like any other copyrighted materials.

2. RESTRICTIONS

The SOFTWARE program is copyrighted. You may not engage in reverse engineering or reproduction of the SOFTWARE by other conceivable methods. You may not reproduce, modify, change, rent, lease, resell, or distribute the SOFTWARE in whole or in part, or create derivative works from the SOFTWARE. You may not transmit or network the SOFTWARE with other computers. You may transfer ownership of the SOFTWARE and the accompanying written materials on a permanent basis provided that you retain no copies and the recipient agrees to the terms of the licensing agreement.