SPEAKER SYSTEMS

POWERED MONITOR SPEAKER SYSTEM

s GENERAL SPECIFICATIONS

SPEAKER SECTION
Components Sensitivity Enclosure
LF: 12cm cone-type x 1 HF: 3 cm cone-type x 1 88dB SPL (1W, 1m, on axis) Bass reflex type, magnetic shielding construction
s Yamaha Active Servo Technology for high power and extraordinary bass response in a compact speaker system. s Ideal for personal, studio, and small sound reinforcement applications. s Multiple inputs and front panel controls for easy set up and operation.

AMPLIFIER SECTION

Output Power
20W INPUT 1: 10dB/10k INPUT 2: 10dB/10k
Input Sensitivity/Impedance MIC INPUT: 50dB/10k

Hum & Noise Controls

58dB (Master Volume at Minimum ) MIC VOLUME control, MASTER VOLUME control, TONE control LOW (max.) + 4dB at 100Hz HIGH (max.) + 7dB at 10kHz ON/OFF SW 70Hz15kHz
Overall Frequency Response
U.S. & Canadian models: General model:
Power Requirements/Consumption
120V, 60Hz/35W 220/240V, 50/60Hz/35W 140 x 290 x 196 mm (5-1/2" x 11-3/8" x 7-3/4") 4kg (8.8 lbs.)
Dimensions (W x H x D) Weight
BWS20-120/-190/-260 Wall Bracket, BAS-10 Free Angle Clamp and BMS-10A Mic Stand Adapter are optionally available.
Components Enclosure Output Power Frequency Response Line Inputs Microphone Input Line Output Controls 10-cm (4") full-range cone speaker x 2 Bass reflex. 20W 70 Hz 18 kHz RCA pin-jack x 1 (rear panel) Phone jack x 2 (front panel) Phone jack x 1 (front panel) Phone jack x 1 (front panel) Power switch, microphone level, master level, high and low EQ.

MS202II

Power Requirements/Consumption U.S. & Canadian models: 120V, 60Hz/45W General model: 230/240V, 50/60Hz/45W Dimensions (WxHxD) Weight 292 x 214 x 192mm (11-1/2" x 8-7/16" x 7-9/16") 3.9kg (8.6 lbs.)
STS-10 Speaker Stand, BWS20-120/-190/-260 Wall Bracket, BAS-10 Free Angle Clamp and BMS-10A Mic Stand Adapter are optionally available.

s DIMENSIONS

s Especially designed for home recording use and semi-professional applications. s Multiple input configuration and comprehensive Low, High EQ and volume controls.

Unit: mm (inch)

OPTIONS
WALL BRACKET WALL BRACKET WALL BRACKET BRACKET ADAPTER
BWS20-120 BWS20-190 BWS20-260
for S15, S55, MS101II, MS202II, MS20S
BWS50-190 BWS50-260 BWS50-320

for MS60S, MS150

BWS251-300 BWS251-400
for MS400*, MS150, MSP10, MSP10M

BAD251

for MS400
*Compatible with the BWS251-400 only. (The Bracket Adaptor BAD251 is also required for attachment.)
* for use with BWS251-400, BCS251 and BBS251

CEILING BRACKET

FOLDBACK BRACKET

BATON BRACKET

FREE ANGLE CLAMP

BCS251

for MS60S, MS150, MS400*, NS-10MC

for MS60S

BBS251

BAS-10

for S15, MS101II, MS202II, MS20S

*BAD251 is necessary

MIC STAND ADAPTER

SPEAKER STAND

SPEAKER TRANSFORMER

BMS-10A

STS-10
for S15, MS101II, MS202II

STS-50

for MS60S, NS-10MC
Power capacity: 15W Fequence Response: 50Hz-20kHz Total harmonic distortion: < 1% (1kHz,15W) Insertion loss: < 1.5dB Dimensions (WxHxD): 80 x 48 x 46mm (3-1/8" x 1-7/8" x 1-13/16") Weight: 450g (15.9 oz)