AV-IT NEWS RELEASE

NS-10MMF 2-Way Bass-Reflex Tower Speaker System
Yamaha Introduces the NS-10MMF 2-Way Bass-Reflex Tower Speaker System Featuring Powerful Bass Response. Yamaha Corporation announces the release of a new high performance speaker system in its NS-10MM Series. The NS-10MMF is a tower-type, floor-standing speaker system that provides extremely high sound quality for both stereo and home theater use. Utilizing a 2-way, bass-reflex design with dual woofers, the NS-10MMF delivers extra-powerful bass output. Its tall, slim profile and handsome finish give it an impressive appearance with or without the grille, and it includes magnetic shielding for placement near a TV or other monitor. It offers excellent sound quality for stereo music listening, and makes an ideal combination with other Yamaha NS-10MMF Series speakers for 6.1-channel or 5.1-channel home cinema systems.
NS-10MMF Main Features Excellent sound quality with stereo music sources. Ideal combination with Yamaha NS-10MM Series speakers for 6.1channel and 5.1-channel movie sound. Dual woofer design delivers deep, powerful bass. Bass Anchor provides stability, dampens vibrations. Magnetic shielding allows placement near a TV/monitor.
NS-10MMF NEW PRODUCT BULLETIN
2-Way Bass-Reflex Tower Speaker System

NS-10MMF

High quality tower speaker system that delivers clear, accurate reproduction of both music and movie sound. Dual woofer design means extra-powerful bass. An attractively impressive addition to any home cinema or music room.
The NS-10MMF is also offered with a black and cherry finish in some areas.
Tower-Type, Floor-Standing Speaker System with Superb Sound Quality for Music and Home Cinema Enjoyment

1/2 (W)

Clear Sound, Powerful Bass and Impressive Appearance A Great Choice for a High Quality Home Cinema System.
Excellent sound quality with stereo music sources. Ideal combination with Yamaha NS10MM Series speakers for 6.1channel and 5.1-channel movie sound. Dual woofer design delivers deep, powerful bass. Bass Anchor provides stability, dampens vibrations. Magnetic shielding allows placement near a TV/monitor.
but the lower woofer has a six-layer wound voice coil for a more voluminous lower range. Increasing the number of voice coil windings increases drive power while lowering the lowest oscillation frequency (fo), achieving heavy bass reproduction relative to woofer size. Ideal Combination for Home Theater System Combined with the other speakers in the NS-10MM Series, these speakers will deliver exceptional 6.1channel and 5.1-channel movie sound. In addition, they are ideal for use with Yamaha Digital Home Cinema Receivers. Team them with the RX-V730 (RDS) or RXV630 (RDS) for a 6.1-channel system or with the RXV530 (RDS) or RX-V430 (RDS) for a 5.1-channel system. NS-10MMF Main Specifications 2-Way Bass-Reflex Design Dual 9cm Woofers and 2.2cm Balanced-Dome Tweeter Magnetic Shielding Input Power (Max/Nominal): 200 W/70 W Frequency Response: 5535,000 Hz Sensitivity: 86 dB/2.83 V/m Crossover Frequencies: 6 kHz Impedance: 6 ohms Dimensions (W x H x D): 179 x 899 x 234 mm/unit Weight: 9.8 kg/unit

Slim, Floor-Standing Design Delivers High Sound Quality The height and position of the speaker drivers were carefully tested, and the cabinet space used to maximum efficiency, in order to produce rich, deep, low frequency response. The Bass Anchor uses five steel plates to provide stable support and also dampen vibrations that can adversely affect sound quality. Dual Woofer Design for Powerful Bass If you want to hear the full effect of explosions and other bass sounds in your movies, youll love the NS10MMF, thanks to its dual woofer design. The top woofer uses a conventional two-layer wound voice coil,
For details please contact:
Dolby Digital and Double D are trademarks of Dolby Laboratories Corporation. DTS, ES and DTS Digital Surround are trademarks of Digital Theater Systems, Inc. Product designs and specifications are subject to change without notice.
Visit us at our website: http://www.yamaha.co.jp/

YAMAHA CORPORATION

P.O. Box 1, Hamamatsu, Japan

ATB649W-NS10MMF@Y01

2/2 (W)

NS- 0MMF 1

SPEAKER SYSTEM SYSTEME DENCEINTES
OWNERS MANUAL MODE DEMPLOI BEDIENUNGSANLEITUNG
NS-10MMT PRE(02.8.20)a 1 02.8.28, 11:39 AM
Thank you for selecting this YAMAHA NS-10MMF speaker system.

PRECAUTIONS

Read this before using the speaker. To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. Install the speaker in a cool, dry, clean place away from windows, heat sources, sources of excessive vibration, dust, moisture and cold. Avoid sources of humming (transformers, motors). To prevent fire or electrical shock, do not expose the speaker to rain or water. To prevent the enclosure from warping or discoloring, do not place the speaker where it will be exposed to direct sunlight or excessive humidity. Do not place the following objects on the speaker: Glass, china, etc. If glass etc. falls by vibrations and breaks, it may cause personal injury. A burning candle etc. If the candle falls by vibrations, it may cause fire and personal injury. A vessel with water in it If the vessel falls by vibrations and water spills, it may cause damage to the speaker, and/or you may get an electric shock. Do not place the speaker where foreign objects such as water drips might fall. It might cause a fire, damage to the speaker, and/or personal injury. Do not place the speaker where it is liable to be knocked over or struck by falling objects. Stable placement will also ensure better sound performance. Placing the speaker on the same shelf or rack as the turntable can result in feedback. Never put a hand or a foreign object into the port located on the rear of the speaker as this might cause personal injury and/or damage to the speaker. When moving the speaker, do not hold the port as it might cause personal injury and/or damage to the speaker. Any time you note distortion, reduce the volume control on your amplifier to a lower setting. Never allow your amplifier to be driven into clipping. Otherwise the speaker may be damaged. When using an amplifier with a rated output power higher than the nominal input power of the speaker, care should be taken never to exceed the speakers maximum input. Do not attempt to clean the speaker with chemical solvents as this might damage the finish. Use a clean, dry cloth. Do not attempt to modify or fix the speaker. Contact qualified YAMAHA service personnel when any service is needed. The cabinet should never be opened for any reasons. Secure placement or installation is the owners responsibility. YAMAHA shall not be liable for any accident caused by improper placement or installation of the speaker.
PRECAUTIONS WHEN POSITIONING THE SPEAKERS
The speaker is constructed with the majority of the weight located in its upper portion, and is thus susceptible to falling over if proper care is not taken to insure its stability. If the speaker falls over, it may damage the speaker or be the cause of injury (or even death) to persons and/or damage to personal property. For safe and proper use of the speaker: Position the speaker in a location that is solid, level, smooth, and low (with respect to the floor). Do not push or apply pressure to the side of the speaker when moving, or lean objects against the side of the speaker. Do not sit on or set objects on top of the speaker. Vibrations or jolts associated with earthquakes and other phenomena or activities may cause the speaker to fall over. For safety reasons, using commercially available products that increase stability in the speaker is recommended (metal fittings or chains, etc.).

NS-10MMF-Eng-B

02.8.28, 11:39 AM

English

CONNECTIONS TO YOUR AMPLIFIER
Before making connections, make sure that the amplifier is switched off.
When using a banana plug <General model only>

ICONNECTIONS

Connect the screw-type input terminals at the rear of the
speakers to the speaker output terminals of the amplifier (or receiver) with the speaker cable. One side of the speaker cable is red and the other side is black. Connect the (+) terminals on the amplifier (or receiver) and speakers using the red side. Connect the () terminals on both components using the black side of the cable. Connect one speaker to the left (marked L) terminals of your amplifier, and another speaker to the right (marked R) terminals, making sure not to reverse the polarity (+, ). If one speaker is connected with reversed polarity, the sound will be unnatural and lack bass. How to Connect:
1 Remove the cover by pulling it toward you. 2 Tighten the terminal knob. 3 Simply insert the banana plug into the terminal.

Banana plug

1 Loosen the knob. 2 Remove the insulation coating at the extremity of each
speaker cable by twisting the coating off.
I Using the non-skid pads
Put the provided non-skid pads at the four corners on the bottom of speaker to prevent the speaker from moving by vibrations etc. Non-skid pad
3 Insert the bare wire. 4 Tighten the knob and secure the cables.
Test the firmness of the connection by pulling lightly on the cables at the terminal.

Speaker (R)

Black Speaker (L)

SPEAKERS

Amplifier or Receiver
Note Do not let the bare speaker wires touch each other as this could damage the speaker or the amplifier, or both of them.
Speaker output terminals of the amplifier (or receiver) Black

PLACING THE SPEAKERS

I Using as 2ch stereo speakers
Better stereo images will be obtained when the speakers are slightly angled in towards the listeners.

REMOVING THE FRONT COVER

The front cover is fastened to the enclosure at six points and can be removed if desired. To remove the cover, hold on to both sides and slowly pull straight away from the speaker. To reattach, line up the six holes on the inner surface of the cover with the six corresponding pegs on the speaker and push gently.
I Using as main speakers in a multi channel system
Position the speakers on both sides of the TV. The positioning of speakers is important, because it controls the whole sound quality of a multi channel system. Set up the speakers on the basis of your listening position by following the owners manual supplied with your amplifier.
Note When the cover is removed, take care not to touch the speaker units with your hands or to exert excessive force with tools.

Center

Subwoofer

SPECIFICATIONS

Type.. 2-way bass-reflex speaker system Magnetic shielding type Driver.. 9 cm (3-9/16) cone woofer x 2 2.2 cm (7/8) balanced dome tweeter

NS-10MMF

Impedance... 6 Frequency Response.. 55 Hz to 35 kHz Nominal Input Power.. 70 W Rear Rear center Maximum Input Power.. 200 W Sensitivity... 86 dB/2.83 V/m Crossover Frequency.. 6 kHz Dimensions (W x H x D).. 179 x 898.5 x 234 mm (7-1/16 x 35-3/8 x 9-3/16) Weight.. 9.8 kg (21 lbs. 9 oz.) Accessories.. Non-skid pad x 4 Speaker cable (4 m) x 1 G Specifications subject to change without notice due to product improvements. G Care should be taken not to exceed the input power values noted above.
Note This speaker features a magnetically shielded design, but there is still a chance that placing it too close to a TV set might impair picture color. Should this happen, move the speaker away from the TV set.
NS-10MMF-Eng-B 4 02.8.28, 11:39 AM
YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA
ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR, 22-34, 25462 RELLINGEN, BEI HAMBURG, F.R. OF GERMANY ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, VASTRA FRLUNDA, SWEDEN MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA