q Preparation

SPEAKER SETUP.. 12 CONNECTIONS... 14 ADJUSTMENTS BEFORE USING THIS UNIT.. 22
q Remote Control Transmitter
REMOTE CONTROL TRANSMITTER.. 45 SETUP CODES... 50 NOTES ABOUT THE REMOTE CONTROL TRANSMITTER.. 51 TROUBLESHOOTING.. 52 SPECIFICATIONS.. 54 LIST OF MANUFACTURERS CODES.. 108

q Basic Oparation

BASIC OPERATIONS.. 27 TUNING OPERATIONS.. 31 SETTING THE SLEEP TIMER.. 36
CAUTION : READ THIS BEFORE OPERATING YOUR UNIT.
1. 2. To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. Install this unit in a cool, dry, clean place away from windows, heat sources, sources of excessive vibration, dust, moisture and cold. Avoid sources of humming (transformers, motors). To prevent fire or electrical shock, do not expose the unit to rain or water. Never open the cabinet. If something drops into the set, contact your dealer. Do not use force on switches, controls or connection wires. When moving the unit, first disconnect the power plug and the wires connected to other equipment. Never pull the wires themselves. The openings on the unit cover assure proper ventilation of the unit. If these openings are obstructed, the temperature inside the unit will rise rapidly. Therefore, avoid placing objects against these openings, and install the unit in a well-ventilated area to prevent fire and damage. The voltage used must be the same as that specified on this unit. Using this unit with a higher voltage than specified is dangerous and may result in fire or other accidents. YAMAHA will not be held responsible for any damage resulting from use of this unit with a voltage other than specified. Digital signals generated by this unit may interfere with other equipment such as tuners, receivers or TVs. Move this unit farther away from such equipment if interference is observed. Always set the VOLUME control to before starting the audio source play. Increase the volume gradually to an appropriate level after playback has been started. Do not attempt to clean the unit with chemical solvents; this might damage the finish. Use a clean, dry cloth. This unit is not disconnected from the AC power source as long as it is connected to the wall outlet, even if this unit itself is turned off. This state is called the standby mode. In this state, this unit is designed to consume a very small quantity of power. FREQUENCY STEP switch (China and General Models only) Because the interstation frequency spacing differs in different areas, set the FREQUENCY STEP switch (located at the rear) according to the frequency spacing in your area. Before setting this switch, disconnect the AC power plug of this unit from the AC outlet. IMPORTANT Please record the serial number of this unit in the space below. Serial No.: The serial number is located on the rear of the unit. Retain this Owners Manual in a safe place for future reference. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. FOR CANADIAN CUSTOMERS TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT AND FULLY INSERT. THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003.

When MEMORY is pressed, this indicator flashes for about five seconds. During this period, the displayed station can be stored to the memory.

3 AUTO TUNING indicator

Lights up when this unit is in the automatic tuning mode.

4 TAPE/MD MON indicator

Lights up when the tape deck (or MD recorder etc.) is selected as the input source by pressing TAPE/MD MON / EXT. DECODER on the front panel or TAPE/MD on the remote control transmitter.

8 SLEEP indicator

Lights up while the built-in SLEEP timer is functioning.

5 STEREO indicator

Lights up when an FM stereo broadcast with sufficient signal strength is received.

SPEAKER SETUP

SPEAKERS TO BE USED
This unit is designed to provide the best sound-field quality with a 5-speaker configuration, using main speakers, rear speakers and a center speaker. The main speakers are used for the main source sound plus the effect sounds. They will probably be the speakers from your present stereo system. The rear speakers are used for the effect and surround sounds, and the center speaker is for the center sounds (dialog, vocals, etc.). If for some reason it is not practical to use a center speaker, you can do without it. Best results, however, are obtained with the full system. The main speakers should be high performance models and have enough power handling capacity to accept the maximum output of your audio system. Other speakers do not have to be equal to the main speakers. For precise sound localization, however, it is ideal to use high performance models that can reproduce sounds in the full range for the center speaker and the rear speakers. Use of a subwoofer expands your sound field It is also possible to further expand your system with the addition of a subwoofer and amplifier. The use of a subwoofer is effective not only for reinforcing bass frequencies from any or all channels, but also for reproducing the LFE (low frequency effect) sound with high fidelity when playing back a source with the Dolby Digital decoded. You may wish to choose the convenience of a YAMAHA Active Servo Processing Subwoofer System, which has its own built-in power amplifier.

Choices: SW/MAIN/BOTH Preset position: SW MAIN: Select this position if your system does not include a subwoofer. In this position, full range signals present at the main channels, signals from the LFE channel and other low bass signals that are selected on 1. CNTR to 3. MAIN to be distributed from other channels are output from the main speakers. SW/BOTH: Select either the SW or BOTH position if your system includes a subwoofer. In either position, signals at LFE channel and other low bass signals that are selected on 1. CNTR to 3. MAIN to be distributed from other channels are output from the SUBWOOFER OUTPUT terminal. When the LARGE position is selected on 3. MAIN, in the SW position, no signal is distributed from the main channels to the SUBWOOFER OUTPUT terminal, however in the BOTH position, low bass signals from the main channels are output to both of the main speakers and the SUBWOOFER OUTPUT terminal.

2. REAR (REAR SPEAKER)

Choices: LARGE/SMALL Preset position: LARGE LARGE: Select this position if your rear speakers have a high ability for bass reproduction, or a subwoofer is connected to the rear speaker in parallel. In this position, full range signals are output from the rear speakers. SMALL: Select this position if your rear speakers do not have a high ability for bass reproduction. In this position, low bass signals (below 90 Hz) at the rear channels are output from the SUBWOOFER OUTPUT terminal (or the main speakers if the MAIN position is selected on 4. BASS).

5. M.LVL (MAIN LEVEL)

Choices: NORMAL (NRML)/10 dB Preset position: NORMAL (NRML) NORMAL (NRML): Normally select this position. 10 dB: Select this position if the sound output from the main speakers is too loud and cannot be balanced with the sound output from the center and rear speakers. In this position, the sound output from the main speakers is attenuated.
Choices: LARGE/SMALL Preset position: LARGE LARGE: Select this position if your main speakers have a high ability for bass reproduction. In this position, full range signals present at the main channels are output from the main speakers. SMALL: Select this position if your main speakers do not have a high ability for bass reproduction. However, if your system does not include a subwoofer, do not select this position. In this position, low bass signals (below 90 Hz) at the main channels are output from the SUBWOOFER OUTPUT terminal if the SW or BOTH position is selected on 4. BASS.

ADJUSTING METHOD

Operations should be made while watching the information on this units display.
If you are using the remote control transmitter, set the SELECTOR DIAL to the AMP/TUN or DSP position on the remote control transmitter.
Press + or once or more to select the position you want.

Adjust BALANCE so that the sound output level of the left main speaker and the right main speaker is the same.
Adjust the sound output levels of the center speaker and the rear speakers so that they become almost as same as that of the main speakers.
a) Press or once or more so that CENTER, R SUR. or L SUR. appears on the display. * Select CENTER to adjust the output level of the center speaker and select R SUR. or L SUR. to adjust the output level of the rear speakers.
Notes Once you have completed these adjustments, you can adjust the overall sound level on your audio system by using VOLUME (or VOLUME ( ) on the remote control transmitter) only. If you use external power amplifiers, you may also use their volume controls to achieve the proper balance. If the function 1. CNTR in the SET MENU mode is set to the NONE position, the sound output level of the center speaker cannot be adjusted in step 8. The center sound is automatically output from the left and right main speakers. If there is insufficient sound output from the center and rear speakers, you may decrease the main speaker output level by setting 5. M.LVL to 10 dB.
b) Adjust the level. * Pressing raises and lowers the level. * While adjusting, the test tone is fixed on the selected speaker.
Press TEST once more to cancel the test tone.

TEST disappears.

BASIC OPERATIONS

TO PLAY A SOURCE

Notes Set the SELECTOR DIAL to the AMP/TUN position on the remote control transmitter. To operate the CD player, DVD/LD player, tape deck, MD recorder, or other components using this remote control transmitter, set the SELECTOR DIAL to the component to be used. (See SETUP CODES on page 50.)
Select the desired input source by using INPUT. (For video sources, turn the TV/monitor ON.) See page 29 if you are using an external decoder or playing a tape or an MD.
or The name of the selected input source will appear on the display.
For the DVD/LD or TV/DBS source, the current input mode is also shown. * To change the input mode for the DVD/LD or TV/DBS source, press INPUT MODE (or the button that you have pressed to select the input source in step 3 on the remote control transmitter) once or more until the desired input mode (AUTO or ANALOG) is shown on the display. (See page 29 for details on switching the input mode.)
If desired, adjust BASS, TREBLE, BALANCE, etc. (see below) and use the digital sound field processor. (see page 37.)
Selecting the SPEAKER system
Because one or two speaker systems (as main speakers) can be connected to this unit, SPEAKERS allow you to select speaker system A or B, or both at once.
Adjusting the BALANCE control
Adjust the balance of the output volume from the left and right speakers to compensate for sound imbalances caused by speaker location or listening room conditions.

Notes The settings of DSP and VOLUME, BASS, TREBLE and BALANCE have no effect on the material being recorded. A source that is connected to this unit through digital terminals only cannot be recorded by a tape deck or VCR connected to this unit. Please check the copyright laws in your country to record from records, compact discs, radio, etc. Recording of copyright material may infringe copyright laws. If you watch a video software that uses scrambled or encoded signals to prevent it from being dubbed, there may be a case that the picture itself will be affected by those signals.
Begin recording on the tape deck, MD recorder or VCR connected to this unit.

TUNING OPERATIONS

Set the SELECTOR DIAL to the AMP/TUN position on the remote control transmitter and select the tuner by using INPUT. Normally, if station signals are strong and there is no interference, quick automatic-search tuning (AUTOMATIC TUNING) is possible. However, if the signal from the station you want to select is weak, you must tune in to it manually (MANUAL TUNING).
AUTOMATIC TUNING MANUAL TUNING
Select the reception band (FM or AM) confirming it on the display.
Press TUNING MODE (so that the AUTO TUNING indicator lights up on the display).

Press TUNING MODE.

Confirm that the AUTO TUNING indicator goes off. Lights up.
Tune in to the desired station manually.
To tune in to a higher frequency, press the UP side of TUNING once. To tune in to a lower frequency, press the DOWN side of TUNING once.
* To continue the tuning search, press and hold the button.
* If the station where the tuning search stops is not the desired one, press once more. * If the tuning search does not stop at the desired station (because the signal from the station is weak), operate the manual tuning procedure.
Note If you tune in to an FM station manually, it is received in monaural mode automatically to increase the signal quality.

MANUAL PRESET TUNING

This unit can store station frequencies selected by tuning. With this function, you can recall any desired station simply by selecting the preset station number with which it was stored. Up to 40 stations (8 stations x 5 groups) can be stored.

To store stations

Tune in to the desired station. (See the previous page for tuning procedure.)
Select the preset station number with which you want to store the station before the MEMORY indicator goes off from the display.
Press A/B/C/D/E once or more to select the desired group (A to E) of preset stations confirming it on the display.

PROGRAM MONO MOVIE ( ) Functions when the input signal is analog or PCM audio, or encoded with the Dolby Digital in 2-channel. Speaker output: main, center, rear ( ) Functions when the input signal is encoded with the Dolby Digital (not in 2-channel). Speaker output: main, center, rear TV SPORTS ( ) Functions when the input signal is analog or PCM audio, or encoded with the Dolby Digital in 2-channel. Speaker output: main, center, rear ( ) Functions when the input signal is encoded with the Dolby Digital (not in 2-channel). Speaker output: main, center, rear DISCO ( ) Functions when the input signal is analog or PCM audio, or encoded with the Dolby Digital in 2-channel. Speaker output: main, rear ( ) Functions when the input signal is encoded with the Dolby Digital (not in 2-channel). Speaker output: main, center, rear ROCK CONCERT ( ) Functions when the input signal is analog or PCM audio, or encoded with the Dolby Digital in 2-channel. Speaker output: main, rear ( ) Functions when the input signal is encoded with the Dolby Digital (not in 2-channel). Speaker output: main, center, rear CONCERT HALL ( ) Functions when the input signal is analog or PCM audio, or encoded with the Dolby Digital in 2-channel. Speaker output: main, rear ( ) Functions when the input signal is encoded with the Dolby Digital (not in 2-channel). Speaker output: main, center, rear
FEATURE This program is designed specifically to enhance mono source programs. Compared to a strictly mono setting, the sound image created in this mode is wider and slightly forward of the speaker pair, lending an immediacy to the overall sound. It is particularly effective when used with old mono movies, news broadcasting and dialog.
This program is furnished with a tight sound field in which the sound will not spread excessively on the front side, but the rear surround side produces a dynamic sound expansion. This program is the most suitable for sports programs.
This program recreates the acoustic environment of a lively disco in the heart of a very lively city. The sound is dense and highly concentrated. It is also characterized by a high-energy, immediate sound.

This unit incorporates a Dolby Digital decoder and a Dolby Pro Logic Surround decoder for multi-channel sound reproduction of sources encoded with Dolby Surround. The operation of these decoders can be controlled by selecting a corresponding DSP program including the combined operation of YAMAHA DSP and Dolby Digital or Dolby Pro Logic Surround.
To enjoy a video source with the Dolby Pro Logic Surround or Dolby Digital decoded
When you select the program DOLBY PRO LOGIC/DOLBY DIGITAL, DOLBY PRO LOGIC ENHANCED/DOLBY DIGITAL ENHANCED or 70 mm MOVIE THEATER/DIGITAL MOVIE THEATER, and the input signal of the source is 2-channel stereo, Dolby Pro Logic Surround is decoded. When some program is selected and the input signal of the source is encoded with Dolby Digital, Dolby Digital is automatically decoded. * The following indicators on the display show you what sound processing is being made. Lights up when the Dolby Digital is being decoded and the input signals of selected source encoded with Dolby Digital is not in 2-channel. Lights up when the digital sound field processor is turned on.
To cancel the effect sound
EFFECT on the front panel and EFCT ON/OFF on the remote control transmitter make it simple to compare the normal stereo sound with the fully processed effect sound. To cancel the effect sound and monitor only the main sound, press EFFECT or EFCT ON/OFF. Press EFFECT or EFCT ON/OFF once more to turn effect sounds on.
Lights up when the Dolby Pro Logic Surround is being decoded. * In addition, for the program DOLBY PRO LOGIC/DOLBY DIGITAL, DOLBY PRO LOGIC ENHANCED/DOLBY DIGITAL ENHANCED or 70 mm MOVIE THEATER/DIGITAL MOVIE THEATER, the name of the program on the display will change according to the type of decoding. (For details, see page 37.) Note If the input signals of the source are encoded with Dolby Digital in 2-channel only, the sound processing for them is similar to that for analog or PCM audio signals.
Notes If the effect sound is canceled when signals encoded with Dolby Digital are input to this unit, signals of all channels are mixed and are output from the main speakers. If EFFECT or EFCT ON/OFF is pressed to turn effect sounds off when the Dolby Digital is decoded, it may happen that the sound is output faintly or not output normally depending on the source. In that case, press EFFECT or EFCT ON/OFF to turn effect sounds on, or use input signals not encoded with Dolby Digital.
ADJUSTING DELAY TIME AND SPEAKER OUTPUT LEVELS
When using the digital sound field processor including the Dolby Pro Logic Surround decoder or the Dolby Digital decoder, you can adjust the delay time between the main sound and effect sound, and each speakers output level as you prefer.

Adjusting method

Press + or to adjust the settings for delay time or speaker output levels.
Press TIME/LEVEL once or more until the name of item which you want to adjust appears on the display.

Battery installation Remote control transmitter operation range

Remote control sensor

Within approximately 6 m (20 feet)

Battery replacement

If the remote control transmitter operates only when it is closed to this unit, the batteries are weak. Replace both batteries with new ones. Be sure to replace batteries within about two minutes. If it takes longer than two minutes, the codes preset for the remote control transmitter will return to the default codes. Notes Use only AA, R6, UM-3 batteries for replacement. Be sure the polarities are correct. (See the illustration inside the battery compartment.) Remove the batteries if the remote control transmitter will not be used for an extended period of time. If batteries leak, dispose of them immediately. Avoid touching the leaked material or letting it come in contact with clothing, etc. Clean the battery compartment thoroughly before installing new batteries.
Notes There should be no large obstacles between the remote control transmitter and this unit. If the remote control sensor is directly illuminated by strong lighting (especially an inverter type of fluorescent lamp etc.), it might cause the remote control transmitter not to work correctly. In this case, reposition this unit to avoid direct lighting.

TROUBLESHOOTING

If the unit fails to operate normally, check the following points to determine whether the fault can be corrected by the simple measures suggested. If it cannot be corrected, or if the fault is not listed in the SYMPTOM column, disconnect the power cord and contact your authorized YAMAHA dealer or service center for help. SYMPTOM The unit fails to turn on when STANDBY/ON is pressed, or turns into the standby mode suddenly soon after the power is turned on. The unit does not work normally. CAUSE Power cord is not plugged in or is not completely inserted. The IMPEDANCE SELECTOR switch on the rear panel is not fully set to the upper or lower end. There is an influence of strong external noise (lightning, excessive static electricity, etc.) or a misoperation while using this unit. Incorrect output cord connections. REMEDY Firmly plug in the power cord. Set the switch fully to the upper or lower end. Turn this unit into the standby mode and disconnect the AC power cord from the AC outlet. After about 30 seconds have passed, connect the power and operate this unit again. Connect the cords properly. If the problem persists, the cords may be defective. Select an appropriate input source with INPUT. Set SPEAKERS corresponding to the speakers in use to the ON position. Secure the connections. Turning the unit into the standby mode and then on again will reset the protection circuit. Cancel the SLEEP timer function. Adjust it to the appropriate position. Connect the cords properly. If the problem persists, the cords may be defective. Firmly connect the audio plugs. If the problem persists, the cords may be defective. Make the GND connection between the turntable and this unit. The turntable should be connected to the unit through the MC head amplifier. Turn the power to the component on.

There is distortion and clear reception cannot be obtained even with a good FM antenna. The desired station cannot be tuned in with the automatic tuning method. Previously preset stations can no longer be tuned in. The desired station cannot be tuned in with the automatic tuning method.

The station is too weak.

This unit has been unplugged for a long period. Weak signal or loose antenna connections.
There are continuous crackling and hissing noises. There are buzzing and whining noises (especially in the evening).
Noises will result from ligtning, fluorescent lamps, motors, thermostats and other electrical equipment. A television set is being used nearby. Direct sunlight or lighting (of an inverter type of fluorescent lamp etc.) is striking the remote control sensor of the main unit. The manufacturers code is not set properly. The proper manufacturers code for the component to be controlled is not set. The component to be controlled is not selected.
Remote control transmitter
The remote control transmitter does not work.
Set the code again. Try entering another code for the same manufacturer. Set the SELECTOR DIAL to the proper position. Turn the power of the unit on.
The sound is degraded when listening with headphones to a CD player or tape deck that is connected to this unit.

Others

This unit is in the standby mode.

SPECIFICATIONS

AUDIO SECTION
Minimum RMS Output Power 8 ohms, 20 Hz to 20 kHz, 0.04% THD [U.S.A. and Canada models] MAIN L/R.. 70 W + 70 W CENTER... 70 W REAR L/R. 70 W + 70 W [Australia, China, Singapore and General models] MAIN L/R.. 65 W + 65 W CENTER... 65 W REAR L/R. 65 W + 65 W 8 ohms, 1 kHz, 0.07% THD [U.S.A. and Canada models] MAIN L/R.. 85 W + 85 W CENTER... 85 W REAR L/R. 85 W + 85 W [Australia, China, Singapore and General models] MAIN L/R.. 80 W + 80 W CENTER... 80 W REAR L/R. 80 W + 80 W Maximum Power [China and General models only] 8 ohms, 1 kHz, 10% THD MAIN L/R.. 105 W + 105 W CENTER... 105 W REAR L/R. 105 W + 105 W Dynamic Power per Channel (by IHF Dynamic Headroom measuring method) [U.S.A. and Canada models] 8/6/4/2 ohms. 100/120/145/170 W [Australia, China, Singapore and General models] 8/6/4/2 ohms. 90/110/135/160 W Dynamic Headroom (8 ohms) [U.S.A. and Canada models only]. 1.55 dB Power Band Width 8 ohms, 35 W, 0.1% THD. 10 Hz to 50 kHz Damping Factor (SPEAKERS A) 8 ohms, 20 Hz to 20 kHz. 60 or more Input Sensitivity/Impedance PHONO MM. 2.5 mV/47 k-ohms CD/TAPEMD/DVDLD/TVDBS/VCR/ VIDEO AUX. 150 mV/47 k-ohms EXT. DECODER MAIN L/R.. 150 mV/47 k-ohms CENTER/SURROUND L/R/SUBWOOFER. 150 mV/40 k-ohms Maximum Input Signal PHONO MM 1 kHz, 0.1% THD. 100 mV or more CD/TAPEMD/DVDLD/TVDBS/VCR/ VIDEO AUX (EFFECT ON) 1 kHz, 0.5% THD. 2.2V or more Output Level/Impedance REC OUT. 150 mV/1.2 k-ohms SUBWOOFER (MAIN SP: SMALL). 4.0 V/1.2 k-ohms Headphones Jack Rated Output/Impedance CD/TAPEMD/DVDLD/TVDBS/VCR/ VIDEO AUX input, 1 kHz, 150mV, 8 ohms. 0.5 V/390 ohms Frequency Response (20 Hz to 20 kHz) CD/TAPEMD/DVDLD/TVDBS/VCR/ VIDEO AUX to MAIN L/R SP OUT.. 00.5 dB RIAA Equalization Deviation PHONO MM.. 00.5 dB Total Harmonic Distortion (20 Hz to 20 kHz) PHONO MM to REC OUT 1 V.. 0.02% or less Signal-to-Noise Ratio (IHF-A Network) PHONO MM to REC OUT [U.S.A., Canada, China and General models] (5 mV, Input Shorted).. 86 dB or more [Australia and Singapore models] (5mV, Input Shorted). 81 dB or more CD/TAPEMD/DVDLD/TVDBS/VCR/ VIDEO AUX to SP OUT (EFFECT OFF) (150 mV, Input Shorted). 96 dB or more Residual Noise (IHF-A Network) MAIN L/R SP OUT. 150 V or less Channel Separation (Vol. 30 dB, EFFECT OFF) PHONO MM (Input Shorted, 1 kHz/10 kHz).. 60 dB or more/55 dB or more CD/TAPEMD/DVDLD/TVDBS/VCR/ VIDEO AUX (Input 5.1 k-ohms Terminated, 1 kHz/10 kHz).. 60 dB or more/45 dB or more Tone Control Characteristics BASS: Boost/cut. 10 dB (50 Hz) Turnover Frequency. 350 Hz TREBLE: Boost/cut. 10 dB (20 kHz) Turnover Frequency. 3.5 kHz Filter Characteristics MAIN L/R, REAR L/R (SPEAKER: SMALL) (H.P.F.).. fc = 90 Hz, 12 dB/oct. SUBWOOFER (L.P.F.). fc = 90 Hz, 18 dB/oct.

VIDEO SECTION

Video Signal Type [U.S.A. and Canada models]. NTSC [Australia and Singapore models]. PAL [China and General models]. NTSC/PAL Video Signal Level. 1 Vp-p/75 ohms Maximum Input Level.. 1.5 Vp-p or more Signal-to-Noise Ratio.. 50 dB or more Monitor Out Frequency Response.. 5 Hz to 10 MHz, 3 dB

FM SECTION

Tuning Range [U.S.A. and Canada models].. 87.5 to 107.9 MHz [Australia and Singapore models].. 87.5 to 108.0 MHz [China and General models] 100 kHz step. 87.5 to 108.0 MHz 50 kHz step. 87.50 to 108.00 MHz 50 dB Quieting Sensitivity (IHF) (100% mod., 1 kHz) Mono.. 1.6 V (15.3 dBf) Stereo.. 23 V (38.5 dBf)
Usable Sensitivity (DIN) [Australia and Singapore models] Mono (S/N 26 dB).. 0.9 V Stereo (S/N 46 dB).. 28 V Alternate Channel Selectivity (400 kHz ) [U.S.A., Canada, China and General models only].. 75 dB Selectivity (two signals, 40 kHz Dev. 300 kHz) [Australia and Singapore models only].. 55 dB Signal-to-Noise Ratio (IHF) Mono/Stereo [U.S.A., Canada, China and General models].. 81 dB/75 dB (DIN-Weighted, 40 kHz Dev.) Mono/Stereo [Australia and Singapore models].. 75 dB/69 dB Harmonic Distortion (1 kHz) Mono/Stereo.. 0.1/0.2% Stereo Separation (1 kHz).. 48 dB Frequency Response 20 Hz to 15 kHz.. 01 dB Antenna Input. 75 ohms, Unbalanced Output Level [U.S.A., Canada, China and General models] (100% mod., 1 kHz).. 550 mV [Australia and Singapore models] (40 kHz Dev., 1 kHz). 550 mV

GENERAL

Power Supply [U.S.A. and Canada models].. AC 120 V, 60 Hz [Australia model]. AC 240 V, 50 Hz [General model]. AC 110/120/220/240 V, 50/60 Hz [China model].. AC 220 V, 50 Hz [Singapore model]. AC 230 V, 50 Hz Power Consumption [U.S.A. model].. 280 W [Canada model].. 310 W/410 VA [Australia and Singapore models].. 300 W [China and General models]. 310 W Maximum Power Consumption 5 ch, 10% THD [General model only].. 650 W AC Outlets 2 SWITCHED OUTLETS [U.S.A., Canada, Singapore, China and General models]. 100 W max. total 1 SWITCHED OUTLET [Australia model]. 100 W max. total Dimensions (W x H x D).. 435 x 151 x 391 mm (17-1/8 x 5-15/16 x 15-3/8) Weight. 12.5 kg (27 lbs. 8 oz.) Accessories.. AM loop antenna Indoor FM antenna Remote control transmitter Batteries Antenna adapter (U.S.A. and Canada models only)

AM SECTION

Tuning Range [U.S.A. and Canada models].. 530 to 1,710 kHz [Australia and Singapore models].. 531 to 1,611 kHz [China and General models] 10 kHz step.. 530 to 1,710 kHz 9 kHz step.. 531 to 1,611 kHz Usable Sensitivity.. 300 V/m Signal-to-Noise Ratio.. 52 dB Antenna. Loop antenna Output Level (30% mod., 1 kHz). 150 mV Specifications are subject to change without notice.

01RX-V595-e/f7

6/23/99, 4:12 PM
LIST OF MANUFACTURERS CODES (Canada and China models) LISTE DES CODES FABRICANTS (Modles pour le Canada et la Chine)

Manufacturer Code

A-Mark 0003 AOC 0030, 0019, 0003, 0052, 0185 Abex 0032 Acura 0009 Admiral 0093 Adventura 0046 Adyson 0032 Aiko 0092 Akai 0030, 0208 Akura 0264 Alaron 0179, 0216 Alba 0009, 0037 Ambassador 0177 Amstrad 0009, 0171, 0177 Anam 0180, 0004, 0009, 0068 Anam National 0161 Anitech 0009, 0068 Arcam 0216 Archer 0003 Audinac 0391 Audiosonic 0037, 0109 Audiovox 0451, 0180, 0003, 0092 BPL 0282 Basic Line 0009 Baur 0037, 0512, 0535, 0554 Baysonic 0180 Belcor 0019 Bell & Howell 0154, 0016 Beon 0037 Blaupunkt 0535, 0554 Blue Star 0282 Bradford 0180 Brandt 0109 Britannia 0216 Brockwood 0019 Broksonic 0236, 0463, 0003, 0426 Bush 0282, 0009, 0037 CCE 0037 CS Electronics 0216 CXC 0180 Candle 0030, 0056, 0046, 0186 Carnivale 0030 Carver 0054, 0170 Cascade 0009 Cathay 0037 Celebrity 0000 Centurion 0037 Cimline 0009 Cineral 0451, 0092 Citizen 0060, 0030, 0056, 0039, 0046, 0092, 0186, 0280 Clairtone 0185 Clarivox 0037
Concerto 0056 Contec 0180, 0009, 0185, 0216 Craig 0180, 0161 Crosley 0054 Crown 0180, 0039, 0009, 0037, 0418 Curtis Mathes 0047, 0054, 0154, 0051, 0451, 0093, 0060, 0030, 0145, 0056, 0016, 0039, 0166 Daewoo 0451, 0019, 0039, 0009, 0037, 0066, 0092 Dansai 0037 Dayton 0009 Daytron 0019 De Graaf 0208 Decca 0037 Denon 0145 Dixi 0004, 0009, 0037 Dumont 0017, 0019 Ectec 0391 Electroband 0000, 0185 Elin 0037 Elta 0009 Emerson 0154, 0236, 0463, 0180, 0282, 0178, 0019, 0179, 0039, 0177, 0185, 0280 Envision 0030 Erres 0037 Ferguson 0037, 0109, 0287, 0560 Fidelity 0216 Finlandia 0208 Finlux 0179, 0037 Firstline 0009, 0216 Fisher 0154, 0159, 0208 Formenti 0037 Frontech 0264 Fujitsu 0179 Funai 0180, 0179, 0171, 0264 Futuretech 0180 GE 0047, 0051, 0451, 0093, 0282, 0178, 0021, 0135 GEC 0037 Geloso 0009 Gibralter 0017, 0030, 0019 GoldStar 0030, 0178, 0019, 0056, 0001, 0002, 0032, 0037, 0109 Goodmans 0179, 0037 Gradiente 0053, 0056, 0170 Granada 0037, 0208, 0339, 0502 Grandin 0282 Grundig 0037, 0535, 0554 Grunpy 0180, 0179 HCM 0282, 0009 Hallmark 0178 Hanseatic 0037 Harley Davidson 0179 Harvard 0180, 0068 Hinari 0179, 0009, 0037, 0283

Teletech Teleton Tensai Texet Thomson
0009 0217, 0206, 0349 0218, 0294, 0320, 0317 0216, 0218 0109, 0196, 0198, 0205, 0287, 0333, 0343, 0349 Thorn 0037, 0072, 0035, 0074, 0084, 0190, 0192, 0361 Thorn-Ferguson 0343 Tomashi 0282 Toshiba 0036, 0035, 0070, 0243 Trical 0157 Triumph 0243 Uher 0206, 0320, 0303 Ultra 0192 Ultravox 0102 Universum 0037, 0370, 0264, 0105, 0346 Vestel 0037 Victor 0053 Videosat 0247 Videotechnic 0217 Vidtech 0036 Vision 0320 Voxson 0163 Waltham 0217 Watson 0037, 0320 Watt Radio 0102 Wega 0036 White Westinghouse 0037, 0216, 0320 Yoko 0037, 0217, 0264, 0431 Zanussi 0206
ABC 1003, 1008, 1014, 1017 Birgmingham Cable Communications 1276 British Telecom 1003, 1105 Cabletime 1161, 1271, 1377 Clyde 1086 Contec 1019 Decsat 1423 Filmnet 1443 France Telecom 1451 GEC 1086 General Instrument 1276 GoldStar 1144 Jerrold 1003, 1276, 1014 MNet 1443, 1019 Magnavox 1032 Memorex 1000 Movie Time 1156 NSC 1156 Oak 1019 PVP Stereo Visual Matrix 1003 Panasonic 1000 Paragon 1000
01RX-V595-e/fCODE(EU) 115 6/23/99, 4:14 PM
Pioneer Pulsar Runco STS Salora Samsung Satbox Scientific Atlanta Starcom Tele+1 Teleservice Toshiba Tudi United Cable Videoway Westminster Zenith
1144, 1375 1008, 1277, 1105 1000
Emanon FTE Ferguson Fidelity Finlux Fracarro Freecom Fuba
AST 2321, 2351 Alba 2455, 2421, 2362, 2613 Aldes 2288 Allantide 2333 Amstrad 2080, 2252, 2345, 2461, 2501 Ankaro 2369, 2288, 2220, 2519, 2217 Anttron 2421, 2183 Arcon 2368 Armstrong 2243 Astra 2108, 2539 Astro 2520, 2173, 2358, 2501 Avalon 2396 Axis 2369, 2530 BT 2668 Barcom 2217 Beko 2189 Best 2369, 2217 Blaupunkt 2173 Boca 2243, 2513 Brain Wave 2332 Bush 2067 CNT 2520 Cambridge 2344 Channel Master 2362 Chaparral 2053, 2209 CityCom 2394 Commlink 2288 Connexions 2396 Crown 2243 Cyrus 2200 D-box 2723 DDC 2362 DNT 2396, 2200 Diskxpress 2217 Drake 2268 EIF 2417 Echostar 2396, 2871
2183, 2067, 2189, 2455, 2108, 2344, 2421, 2335 2421, 2369, 2396, 2217, 2297, 2417 G-Sat 2183 Galaxis 2288, 2834, 2863 Galaxisat 2321 GoldStar 2335 Gooding 2571 Goodmans 2189 Grothusen 2335 Grundig 2571, 2173, 2189, 2328 Harting und Helling 2333 Hinari 2183 Hirschmann 2502, 2173, 2573, 2287, 2333, 2397, 2398 Hitachi 2455 Houston 2668 Huth 2243, 2288, 2220, 2346 ITT 2108 InVideo 2871 Intervision 2592 JVC 2571 Johansson 2332 Kathrein 2173, 2200, 2092, 2331, 2358, 2394, 2442, 2480, 2504 Kosmos 2331, 2335 Kreiselmeyer 2173 Kyostar 2421 La Sat 2520, 2513, 2464 Lemon 2692 Lenco 2421, 2335 Lennox 2592 Lupus 2369 Luxor 2573, 2108 Manhattan 2455, 2592, 2520 Marantz 2200 Maspro 2092, 2328, 2336 Matsui 2571, 2344 Mediamarkt 2243 Micro Technology 2333, 2539 Minerva 2571 Morgans 2243, 2513 Multistar 2331, 2464 Muratto 2335 Navex 2332 Neuhaus 2501 Neusat 2692, 2834 Newhaus 2220 Nikko 2360 Nokia 2455, 2573, 2108, 2328, 2397, 2873 Nordmende 2362 Orbitech 2501 Oxford 2344

2455, 2183, 2067, 2328, 2336, 2791 Palcom 2297 Palladium 2571 Palsat 2501 Panda 2455 Philips 2455, 2571, 2200, 2292, 2328 Phonotrend 2288, 2592 Planet 2871 Plasmatic 2442 Polytron 2394 Promax 2455 Prosat 2288 Quadral 2362, 2519 RFT 2288, 2220, 2200 Radiola 2200 Radix 2396, 2882 SAT 2321, 2351, 2461 SEG 2421, 2369, 2539 STVI 2417 Saba 2520, 2336 Sabre 2455 Sagem 2820 Salora 2108 Samsung 2287 SatPartner 2421, 2332, 2520, 2502, 2335, 2692 Satcom 2605, 2346 Satec 2183, 2328 Satmaster 2346 Schwaiger 2183, 2394, 2504 Seemann 2396, 2530 Siemens 2173 Skymaster 2288, 2605, 2519 Star Trak 2421 Strong 2421 Sunstar 2513 TPS 2820 Tantec 2455, 2297, 2336 TechniSat 2262, 2501 Techniland 2346 Telefunken 2421 Teleka 2243, 2613 Telesat 2605 Thomson 2455 Tonna 2668, 2346 Triad 2321, 2333, 2335, 2351 Triasat 2501 Unitor 2332, 2217 Universum 2571, 2173 Vector 2333 Ventana 2200 Vortec 2421 Vtech 2351 Wevasat 2333 Winersat 2332 Wisi 2455, 2396, 2173, 2321, 2351, 2372, 2406, 2407 XSat 2889 Xcom Multimedia 2889 Zehnder 2520, 2321, 2331
01RX-V595-e/fCODE(EU) 116 6/23/99, 4:14 PM
ASA 3037, 3081 Admiral 3048 Adventura 3000 Aiko 3278 Aiwa 3000, 3037, 3307, 3348, 3352 Akai 3315, 3106, 3041, 3053 Akiba 3072 Alba 3072, 3020, 3278, 3209, 3315, 3352 Ambassador 3020 Amstrad 3000, 3278, 3325, 3332 Anitech 3072 Asha 3240 Asuka 3037 Audiovox 3037 Baird 3000, 3041, 3104, 3107 Basic Line 3072, 3020, 3278 Beaumark 3240 Bell & Howell 3104 Blaupunkt 3034, 3226, 3195, 3003, 3006, 3154, 3162, 3227, 3403 Brandt 3320, 3187, 3321 Brandt Electronic 3041 Broksonic 3209 Bush 3072, 3278, 3209, 3352 CCE 3072, 3278 CGE 3000 Calix 3037 Capehart 3020 Carver 3081 Catron 3020 Cimline 3072 Cineral 3278 Citizen 3037, 3278 Clatronic 3020 Colt 3072 Combitech 3352 Condor 3020 Craig 3072, 3037, 3047, 3240 Crown 3072, 3020, 3278 Curtis Mathes 3041, 3162 Cybernex 3240 Cyrus 3081 Daewoo 3020, 3278, 3045 Dansai 3072 Daytron 3020 De Graaf 3042, 3166 Decca 3000, 3081 Denon 3042 Dual 3041 Dumont 3000, 3081, 3104 Dynatech 3000 ESC 3278, 3240 Elbe 3038 Elcatech 3072 Electrohome 3037
3000, 3037, 3278, 3209, 3036, 3043, 3088 Ferguson 3320, 3041, 3107, 3321 Fidelity 3000 Finlandia 3081, 3104 Finlux 3000, 3081, 3042, 3104 Firstline 3072, 3037, 3209, 3045, 3043 Fisher 3046, 3047, 3054, 3104 Frontech 3020 Fuji 3033 Funai 3000 GE 3048, 3240 GEC 3081 Garrard 3000 General 3020 Go Video 3432 GoldHand 3072 GoldStar 3037, 3038, 3225 Goodmans 3072, 3000, 3020, 3037, 3278, 3403 Gradiente 3000, 3008 Graetz 3005, 3041, 3104, 3240 Granada 3081, 3046, 3104 Grandin 3072, 3000, 3037 Grundig 3072, 3081, 3347, 3226, 3195, 3003, 3006, 3007, 3207, 3349, 3403 HCM 3072 HI-Q 3047 Hanseatic 3037 Harley Davidson 3000 Harman/Kardon 3038 Harwood 3072 Headquarter 3046 Hinari 3072, 3004, 3240, 3352 Hitachi 3000, 3004, 3042, 3041, 3166, 3235, 3240 Hypson 3072 ITT 3106, 3046, 3384, 3005, 3041, 3104, 3240 ITV 3037, 3278 Imperial 3000 Ingersol 3004 Interfunk 3081 JVC 3067, 3384, 3008, 3041, 3206, 3207, 3486 Jensen 3041 KEC 3037, 3278 KLH 3072 Kaisui 3072 Kendo 3209, 3106 Kenwood 3067, 3384, 3038, 3041 Kodak 3037 Korpel 3072 LXI 3037 Lenco 3278 Leyco 3072 LIoyds 3000 Loewe 3037, 3004, 3081, 3006

Home Theater Systems

Concert Series

Concert Series Systems

Yamaha Concert Series
A Full Spectrum Of Home Entertainment
For over a century, Yamaha has been advancing the art and science of creating and reproducing sound to enrich the lives of millions around the world.

Mini Systems

No other company can bring this fusion of aesthetic sensibility and technological capability to bear on the creation of worldclass audio components. We invite you to explore the results on the following pages. Youll find an extensive family of home theater components and matched systems.

Classic Line

Home Theater Essentials in a Single Box
Yamaha A Balance Of Art And Science
Yamaha has been intimately involved with sound since our first organs and pianos debuted to appreciative audiences in the late 1800s. In the decades since then, weve steadily refined our knowledge of music and sound reproductionand the many roles they play in our everyday lives. Our experience resonates in concert halls throughout America, Europe and Asia. Its hard at work in recording studios from The musical origins of Yamaha Hollywood to Nashville. It helps trace back through over a century of pianos that have earned music students master their their reputations in the worlds calling. And it brings brilliant great concert halls. musical performances and blockbuster motion picture soundtracks to life in the homes of those who appreciate great entertainment. Yamahas musical accomplishments now encompass the production of more than five million pianos, as well as acoustic guitars and wind instruments prized by everyone from amateur performers to members of worldclass ensembles and orchestras. And just as electronic technology has transformed our century, The design of every Yamaha electric guitar draws on the over the years its also become expertise of professional musian integral part of new generacians and music consultants. tions of Yamaha products for audio professionals as well as home entertainment. In fact, youll find that Yamahas electronic expertise now extends to virtually every corner of the world of sound. Our electric guitars, keyboards and synthesizers, digital drum machines and electronic wind instruments have earned critical acclaim from the music industrys most demanding performers. Yamaha music schools in over 40 And our revolutionary digital countries have enabled more than mixing consoles are sought after four million students to share the by recording engineers who gain joys of performance art. greater creative freedom from their highly automated features. At the heart of all these products resides the secret to the extraordinary performance and ease of use youll discover in Yamaha home theater components as well.
On permanent exhibit at the Museum of Modern Art, NY: The Yamaha WX7 Wind MIDI controller is a high-technology digital wind instrument that links to a computer but plays like its traditional counterpart.
Its the unique blend of century-long acoustic experience with cutting-edge Yamaha keyboards are enjoyed at electronic systems envisioned, home and professionally throughout the world. developedand ultimately producedin Yamahas own laboratories and semiconductor manufacturing facilities. Yamahas many years of crafting and refining musical instruments are matched by our vast experience at analyzing and enhancing the venues where these instruments are used. Yamaha specialists have analyzed and acoustically designed hundreds of studios and concert halls for optimum audio performance. And weve engineered what Racing is the ultimate testing weve learned into the proprietary ground for Yamahas advanced microchips that expand and engine technology, from enhance your listening experience Formula One to personal through advances such as Cinema water vehicles. DSP and Tri-Field Processing in our home theater components. No other company can bring this fusion of aesthetic sensibility and technological capability to bear on the creation of worldclass audio components. We invite you to explore the results on the following pages. Youll find an extensive family of home theater components and matched systems. Each is Developing our own sophistidesigned to make it easy to cated semiconductor technology surround yourself with audio has made Yamaha one of the worlds leading microprocessor of uncompromising quality. manufacturers. Because all embody the passion for creating extraordinary sound that has distinguished Yamaha for generations.

Yamaha has amassed an incredible range of sound field experience by measuring and recording the characteristics of all kinds of venues.
CS-R4004 Music and Home Theater System
Our top Concert Series music and home theater system is based on our powerful R-V905 5-Channel A/V Receiver, equipped with Dolby Pro Logic, Dolby Digital and our unique Yamaha Cinema DSP. The R-V905 delivers 85 watts RMS into your left front, right front, center channel and each rear effects channel plus with a 6-channel input, its ready to link up with an external decoder for possible future formats. the R-V905 also features exclusive Yamaha Tri-Field Cinema DSP for unequalled movie enjoyment at home. The system also includes the CDC-905 5-Disc CD Changer with S-Bit D/A technology, plus patented Yamaha PlayXchange, which allows you to change four discs while a fifth continues to play. The K-903 Auto Reverse Double Cassette Deck includes Dolby B and C noise reduction, two-speed dubbing and CD Synchro-Start capability.
And when you combine all these features and power with the specially matched pair of 3-way NS-A3500A tower loudspeakers, a pair of NS-E60 Effects/Surround speakers, and the 2-way NS-AC142 dual woofer center channel speaker, you have a system designed for those that demand the very best. The CS-R4004 is equipped with a userfriendly, slim-line remote control and is housed in a high-gloss black cabinet that features a curved, smoked glass door.
CS-R3604 Music and Home Theater System
Start with our 5-channel HTR-5140 A/V Receiver delivering 70 watts RMS to each of the three front speakers and 70 to both of the rears. Include Dolby Pro Logic, Dolby Digital, Yamahas unique DSP, Cinema DSP and discrete 6-channel line inputs for adding a future external decoder (such as DTS or MPEG2), and you have the makings for a powerhouse system. The system also includes the CDC-505 5-Disc CD Changer with PlayXchange, CD synchronized recording and Yamaha S-Bit technology. The K-903 Cassette Deck features dual well, autoreverse, two-speed dubbing and Dolby B & C noise reduction. All this performance is connected to a pair of NS-A1638 mirror-imaged tower speakers that feature side-firing 12 woofers, high power-handling capacity, dual 51/4 midranges, glass-filled 1 tweeters and gold-plated 5-way binding posts for easy connection. Two 2-way multi-purpose NS-AW1 effects speakers use 5 woofers and 1/2 tweeters, while the center channel (NS-AC143) contains dual 51/4 woofers and a single 1 tweeter. The system comes complete with an attractive black Euro-style equipment rack that will hold four components, as well as a universal remote control to complete this visually and audibly matched home entertainment system.

DOLBY D I G I T A L

Dolby Digital
Dolby Digital, also known as AC-3, has been available on laserdiscs for some time. Its also been established as the standard for audio on the new generation of DVDs. This advanced technology at last gives home theater enthusiasts surround sound performance that can maintain the precise spatial relationships the director originally envisioned. The major advance offered by Dolby Digital Surround is the availability of 5.1 channels of sound. Why 5.1? Because the left front, center, right front, right rear and left rear speakers all receive their own discrete signals carrying the full frequency spectrum. An additional sixth channel carries only the lowest, non-directional frequencies to a subwoofer. What this means is that Dolby Digital is able to create a sound image that positions dialogue and effectsincluding moving oneswith a precision previously unheard of in a home system.
Yamahas musical heritage includes extensive research into the way sound behaves in venues such as these. And weve developed some very sophisticated techniques for reproducing that behavior in your home, using proprietary microchips designed and fabricated in our own facilities. We call this DSP. And its short for Digital Sound Field Processing. It can make a few home speakers reproduce the seamless curtain of sound created by multiple-speaker arrays in your local theater. It can recreate the ambiance of a stadium, a concert hall or an intimate club. And when combined with Dolby Digital and Dolby Surround Pro Logic, it can even expand the apparent dimensions of your roomletting you experience the spaciousness of a large theater, while hearing every sound coming from exactly where the director intended. Yamaha 5-disc CD changers incorporate proprietary technology that gives you much greater convenience at the same time it actually helps improve your sound. Our PlayXchange system uses separate trays to hold the disc in use and the four awaiting play. This means you can easily replace any of the non-playing titles even while the music keeps on going. And because PlayXchange isolates the disc in use, resonance and vibration dont have an opportunity to degrade your musical signal. The Digital-to-Analog, or D/A, conversion is the critical step that translates the digital code on your CD into the analog signal that your receiver amplifies and your speakers turn into sound. So its not surprising that Yamaha has invested considerable time and technical resources to achieve the highest possible performance from the D/A converter chips that accomplish this function. Our exclusive S-Bit technology is the answer. So you hear smooth, dynamic sound, free of the sonic artifacts that can be introduced by a less faithful D/A conversion.

Dolby Pro Logic

The premier home theater surround sound technology until the arrival of Dolby Digital, youll find Dolby Pro Logic encoding on thousands of past and current releases. Pro Logic provides discrete signals to your front left, center and front right speakers, as well as a fourth channel to feed surround and effects signals to both rear speakers. A vast improvement over conventional stereo, this arrangement helps position dialogue and other sounds much more naturally around your room.
Yamahas unique digital sound field processing recreates the acoustic characteristic of actual performance venues from around the world.

Yamaha Cinema DSP

Even the best surround technology doesnt take into account one very important factor affecting the sound you hear. Thats the fact that your cozy living room has nothing in common, acoustically speaking, with cavernous theaters and concert halls, or any other locations where real movie or musical performances take place. Harnessing the energy required to accurately generate extremely low bass from a subwoofer is no small feat. So Yamaha developed Active Servo Technology to help. By precisely governing the motion of our low-frequency drivers, this approach ensures tight, responsive performance. While also helping generate maximum output from a relatively small speaker enclosure.
Cinema DSP adds the acoustic spaciousness of a grand movie palace to the directional capabilities technology provided by Dolby Pro Logic.

Sound Technology

CinemaStation AV-1 Compact Home Theater System
Some enthusiasts consider a towering stack of audio/video components ideal home accessories. Others, however, may prefer a less imposing approach to experience the full excitement of todays music and movie soundtracks. In which case, the Yamaha CinemaStation AV-1 is the perfect answer, blending unobtrusively into your bookshelf. In combination with your TV, VCR, laserdisc or DVD player, the AV-1 provides a full-featured CD player and FM/AM tuner, along with a powerful 200 watt subwoofer/amplifier that drives five high quality satellite speakers. The CD player uses technology with proven high performance in Yamahas top CD players. The satellite speakers are small, yet powerful, and have magnetic shielding (as does the subwoofer) so you can place them on or near your TV. They can also be set flat on a shelf or at a slight upward angle when placement is low. Direct operation makes the control center exceptionally easy to use. Just touching one of the input selector buttons turns the unit on and selects that source. You can make these selections via remote control, as well. You will truly enjoy the enveloping sensation of Cinema DSP, which is Dolby Pro Logic in combination with Yamahas unique Digital Sound Field Processing (DSP). While Dolby Pro Logic positions dialogue and effects naturally around the room, Yamahas DSP technology recreates the acoustic spaciousness of a grand movie theater, right in your own home. Plus, six different Yamaha Hi-Fi, DSP music programs can give your room the acoustics of actual performance venues. Yet for all its advanced capabilities, the CinemaStation AV-1 is easy to set-up, and simple to use with on-screen menus.even a remote control that glows in the dark.

Cinema Station AV-S7 Compact Theater System
The AV-S7 gives you everything you need for highquality, dynamic movie theater sound: A center speaker unit, a subwoofer/power amplifier unit and four satellite speakers all you add is your TV and VCR! Behind the innovative styling of the front panel there are actually two units: A center speaker and electronic control center. The speaker handles dialogue and other sounds that should come from the screen, while the control center lets you command various functions. Compact size means easy placement of speakers, and the powerful subwoofer/ amplifier mean realism and sonic depth for maximum enjoyment. You can choose Cinema DSP, Hi-Fi DSP and Dolby Pro Logic.
GX-700 Home Theater Shelf System
A newly styled compact Home Theater system for the den, bedroom or apartment. The GX-700 brings the essential elements of performance and convenience to your home enjoyment by including a high-powered 5-channel Dolby Pro Logic A/V receiver, an auto-reverse cassette deck and a 3-disc CD changer with PlayXchange. The receiver features 75 watts for the main and center channels, and 20 watts for the rear effects. The system features new YMERSION technology which creates a wider sound stage and more precise localization. Five bass-reflex speakers complete the package.
GX-70 Mini Home Theater System
Heres proof that Yamaha technology can put true home theater virtually anywhere you want to enjoy it. The GX-70 offers everything you need to add Dolby Pro Logic surround sound to your TV and Hi-Fi VCR or other video source. A pair of 3-way Active Servo Technology Main Speakers, plus full-range centerchannel and rear effects/surround speakers deliver outstanding response. Theyre driven by a built-in amplifier generating 65 watts for each front speaker, and 20 watts for the center and each of the rear speakers. A 5-band graphic equalizer complements digital sound field processing capabilities that provide preset parameters for performance locations and types of music, offering you numerous ways to tailor output to your taste. Listen to your favorite artists on the 3-disc CD changer. Exclusive Yamaha PlayXchange lets you slip in a new disc while the music keeps on rolling. Youll also be able to tape those titles for the car with the GX-70s double auto-reverse cassette deck. Auto Tape Selection, CD Synchro Recording and Two-Speed Dubbing make it easy. And all this capability can be right in the palm of your hand. Just pick up the luminous remote control and let the GX-70 fill your home with sound.

GX-500 Stereo Shelf System
A 2-channel high-power system for your office or den, the GX-500 provides 75 watts x 2, an auto-reverse cassette deck and 3-disc CD changer with PlayXchange. Two 3-way bass-reflex speakers are matched to the overall system design. The system also features YMERSION technology for a wider sound stage and precise localization. The GX-500 speakers are available in cherry-wood style finish or gloss black piano style finish to match any home or office decor.
CL-1 Classic Line Home Theater Components
Pick up a complete set of matched home theater components in one box. The core of the CL-1 package is a versatile 5-channel A/V home theater receiver that delivers 45 watts to each front speaker and the center channel, plus 15 watts to each rear speaker. Built-in sound field processing includes Dolby Pro Logic as well as other concert and movie modes. Its even ready for Dolby Digital when you add a decoder or decoder-equipped DVD player. Youll also get a compact disc player with 25-track Program Play as well as Peak, Index, Music and Skip Search functions. And an Auto-Reverse Double Cassette Deck lets you perform twospeed dubbing with CD-Tape Synchro Record Start and Dolby HX Pro Dynamic Bias Servo to ensure top-quality results. All you need to look for are speakers. And the CLS-150 or CLS-200 packages are great places to start.
CLS-150 Classic Line Home Theater Speaker Package
Another matched speaker package to take full advantage of the CL-1 Component group for total home entertainment. The CL-150 provides five compact, timbre-matched 2-way speakers with 4 polymer coated woofers and 1/2 ferro-fluid cooled tweeters. Each is magnetically-shielded for placement near your TV. An SW-4 subwoofer adds the bass punch with a 10 driver and a built-in 100 watt amplifier, plus Advanced Active Servo Technology.
CLS-200 Classic Line Home Theater Speaker Package
Our top-of-the-line complement to the CL-1 Home Theater components, or any other Pro-Logic or Dolby Digital system. A set of five dramatically styled 2-way magnetically-shielded shelf speakers feature 51/4 glass-filled cloth midranges with 1 tweeters of the same material. And an SW-5 subwoofer features a 12 driver, 200 watt amplifier and Advanced Active Servo Technology for powerful bass down to 18 Hz.

YHT-22 Home Theater In A Box
Get ready for a powerful performance. The HTR-5140 5-channel A/V Receiver at the heart of this package is more than up to the most demanding music and movie soundtracks. It drives three front speakers with 70 watts RMS per channel, as well as supplying 70 watts RMS to each of the two rear effects speakers. Dolby Digital, Dolby Pro Logic, as well as Cinema DSP music and movie theater sound field modes let you experience the original drama of each performance. A 6-channel input is also provided to allow for the addition of future 6-channel formats. The YHT-22 system includes an 8 powered (70 watts RMS) subwoofer delivering deep, clean bass response down to 30 Hz, two-way main and center channel speakers, as well as two shelf/wall mount surround/effects speakers. The entire system is under your control with our user-friendly learning remote that features built-in codes for almost any of the components you may already own.
YHT-16 Home Theater In A Box
When Yamaha Cinema DSP meets Dolby Pro Logic surround, the results are audibly extraordinary. Suddenly your six home speakers take on the seamless sensation that large theaters achieve with multiple speaker arrays. And with the additional sound field processing capabilities provided by the R-V703 A/V Receiver included in the system, you can choose to recreate a variety of other performance venues also. The R-V703 also provides a discrete 6-channel line input for an external 5.1 channel processor for Dolby Digital, DTS or MPEG2 formats. The R-V703 delivers 80 watts RMS per channel to a pair of 2-way, 5 bookshelf main speakers, center speaker, plus 20 watts RMS to each of the two matching surround speakers. A YST-SW45 powered subwoofer features a built-in 70 watt amplifier and Advanced Active Servo Technology (YST) for deep, clean bass response. A universal remote lets you control all system functions. You can use the remote to command additional Yamaha products as well, along with most TVs, VCRs and other home theater components.
Home Theater Essentials In A Single Box
CS-R4004 Music & Home Theater System
R-VChannel A/V Home Theater Receiver (5.1 Channel Ready) Audio Section Output Power Minimum RMS Output Power Minimum RMS Output Power (8 ohms, 20-20,000 Hz, 0.04% THD) (8 ohms, 1 kHz, 0.07% THD) Main Channels 70 W x 2 Main Channels 85 W x 2 Center Channel 70 W Center Channel 85 W Rear Effect Channels 70 W x 2 Rear Effect Channels 85 W x 2 Dynamic Power/Channel (8/6/4/2 ohms, main channels) 100/120/145/170 W Damping Factor (8 ohms, 20-20,000 Hz, main channels) 60 Frequency Response (CD) 20-20,000 Hz 0.5 dB THD (20-20,000Hz) 0.025% (CD to speaker out) Signal-to-Noise Ratio (IHF-A-Network) 96 dB (CD, input shorted) Tuner Section FM 50 dB Quieting Sensitivity Mono 1.6 V (15.3 dBf) (IHF, 75 ohms) Stereo 23 V (38.5 dBf) FM Alternate Channel Selectivity (IHF) 75 dB FM Signal-to-Noise Ratio (mono/stereo) 81 dB / 76 dB Dimensions (W x H x D) 17-1/8 x 5-15/16 x 15-3/8 Weight 27 lbs. 9 oz. CDC-Disc CD Changer Frequency Response 2-20,000 Hz 0.5 dB Total Harmonic Distortion + Noise 0.003% Signal-to-Noise Ratio 106 dB Dynamic Range 96 dB Dimensions (W x H x D) / Weight 17-1/8 x 4-1/4 x 16 / 12 lbs. K-903 Auto Reverse Double Cassette Deck Yamaha Stable Tape Transport 1+1-motor Yamaha GF Head Hard permalloy, play/rec + play Wow & Flutter: W Peak 0.15 / W RMS 0.08% Frequency Response Normal 20-16,000 Hz, 3dB High Position 20-17,000 Hz, 3dB Metal 20-19,000 Hz, 3dB Signal-to-Noise Ratio Dolby B NR 66dB Dolby C NR 74 dB Harmonic Distortion 1.0% Optional Remote Unit RKX1 Dimensions (W x H x D) / Weight 17-1/8 x 5-3/4 x 11-1/8 / 11.0 lbs. NS-3500A 3-Way A/V Tower Speaker Midrange/Woofer 4 Polypropylene Midrange / Dual 8 Polypropylene Woofers Magnetically Shielded, A/V Ready Tweeter 1 Mylar Dome Suggested Amp. Power 160 Watts Max Power Handling Frequency Response 50 Hz to 20 kHz Dimensions (W x H x D) 10-1/2 x 43 x 14-1/4 NS-E60 Effects/Surround Speakers Midrange/Woofer 4 Full Range Driver Suggested Amp. Power 25 W Nominal Power, 50 W Music Power Frequency Response 70 Hz to 20 kHz (-10 dB) Dimensions (W x H x D) 7-1/16 x 9-3/16 x 4-7/16 NS-AC142 2-Way Center Channel Speaker Midrange/Woofer 2 x 5-1/14 Polypropylene Magnetically Shielded, Tweeter 1 Neodymium Suggested Amp. Power 160 Watts Max Power Handling Frequency Response 60 Hz to 20 kHz Dimensions (W x H x D) 19 x 6-5/16 x 7-7/16 YSR-3500A Equipment Cabinet Dimensions (W x H x D) 19-3/4 x 43 x 16-5/8

CS-R3604 Music & Home Theater System
HTR-Channel A/V Home Theater Receiver (Dolby Digital) Output Power Minimum RMS Output Power Minimum RMS Output Power (8 ohms, 20-20,000 Hz, 0.04% THD) (8 ohms, 1 kHz, 0.07% THD) Main Channels 60 W x 2 Main Channels 70 W x 2 Center Channel 60 W Center Channel 70 W Rear Effect Channels 60 W x 2 Rear Effect Channels 70 W x 2 Frequency Response 20-20,000 Hz 0.5 dB THD (20-20,000 Hz): CD-Sp Out (Main) 0.03% (30 W/8) Phono-Rec Out 0.02% (1 V) Signal-to-Noise Ratio (CD, Input Shorted) 96 dB (150 mV) Dimensions (W x H x D) / Weight: 17-1/8 x 6 x 15-3/8 / 24.7 lbs CDC-Disc CD Changer Frequency Response 2-20,000 Hz 0.5 dB Total Harmonic Distortion + Noise 0.004% Signal-to-Noise Ratio 102 dB Dynamic Range 95 dB Dimensions (W x H x D) / Weight 17-1/8 x 4-1/2 x 16 /12.8 lbs. K-903 Auto Reverse Double Cassette Deck Yamaha Stable Tape Transport 1+1-motor Yamaha GF Head Hard permalloy, play/rec + play Wow & Flutter: W Peak 0.15 / W RMS 0.08% Frequency Response Normal 20-16,000 Hz, 3dB High Position 20-17,000 Hz, 3dB Metal 20-19,000 Hz, 3dB Signal-to-Noise Ratio Dolby B NR 66dB Dolby C NR 74 dB Harmonic Distortion 1.0% Optional Remote Unit RKX1 Dimensions (W x H x D) / Weight 17-1/8 x 5-3/4 x 11-1/8 / 11.0 lbs. NS-A1638 Two 4-Way Passive Narrow Tower Speaker Midrange/Woofer Dual 5-1/4 High Compliance Glass Filled Cloth Midrange w/Inverted Dust Cover / Mirror Imaged Side Firing Long Throw 12 Polymer Coated Woofer w/Inverted Dust Covers, Magnetically Shielded, A/V Ready Tweeter 1 Glass Filled Cloth Dome Suggested Amp. Power 100 W Nominal Power, 200 W Music Power Frequency Response 35 Hz to 20 kHz Sensitivity 88 dB/W/M Impedance 6 ohms Dimensions (W x H x D) 7-1/16 x 36-1/2 x 17-1/16 NS-AW1 2-Way Multi-Purpose Midrange/Woofer 5 High Compliance Glass Filled Cloth Woofer, Magnetically Shielded Tweeter 1/2 Pure Titanium Balanced Dome Suggested Amp. Power 60 W Nominal Power, 120 W Music Power Frequency Response 55 Hz to 22 kHz 10 dB Sensitivity 86 dB/W/M Impedance 6 ohms Dimensions (W x H x D) 5-7/8 x 8-1/2 x 5-1/2 NS-AC143 2-Way Center Channel Speaker Midrange/Woofer Dual 5-1/14 High compliance Glass Filled Cloth Woofer w/Inverted Dust Cover Magnetically Shielded Tweeter 1 Glass Filled Cloth Dome Tweeter Attenuator Suggested Amp. Power 80 W Nominal Power, 160 W Music Power Frequency Response 80 Hz to 20 kHz Sensitivity 89 d/W/M Impedance 8 ohms Dimensions (W x H x D) 19-1/16 x 6-1/2 x 6-3/4 W-F45B Equipment Rack Open, Euro-styling, Holds up to 4 Pieces of Electronics

Specifications

CinemaStation AV-1
Control Center Unit Signal Processor Section Cinema DSP (Dolby Pro Logic/Enhanced) Program Dolby Pro Logic 6 Hi-Fi DSP Programs: Concert Video and Mono Movie for Video Source, Concert Hall, Rock Concert, Disco and Stadium for Audio Source Remote Controllable Delay Time and Speaker Test Mode Remote Controllable Main, Center, Effect and Subwoofer Level Controls CD Player Section Music Search and Skip Play Repeat Play (Single/Full) Tuner Section 40-Station Random Access Preset Tuning Auto Preset Memory and Preset Editing A Direct PLL IF Count Synthesizer Tuning General Versatile Timer Functions: Timer On/Off, Wake Up, Sleep Timer, Auto Power Off, etc. On-Screen Display: Input Mode; Program Name; Main, Center Effect and Subwoofer Levels; Delay Time; Speaker Test Mode; Sleep Timer; Clock 3 A/V and 3 Audio Inputs (Video 2 Input Terminal on Front Panel) Remote Controllable Input Selection with Last Memory 7-Step Dimmer (Individual Controllable at Power On/Off) 23-Key Remote Control that Glows in the Dark Dimensions (W x H x D) / Boxed Wt. 12-5/8W x 2-3/4H x 10-1/8D / 5.7 lbs. Subwoofer/Power Amplifier Unit Amplifier Section 200 W Total Output Power: Subwoofer 50W + Satellites 30 W x 5 (Main L/R, Center and Effect L/R) Subwoofer Section Yamaha YST Technology for Deep Bass Response 8 Cone Multi-Range Driver Magnetic Shielding Allows Placement Near the TV Dimensions (W x H x D) / Boxed Wt. 9-7/8W x 16-3/4H x 16-1/2D / 32.0 lbs. Satellite Speaker Systems (5) 3-1/8 Full Range Speaker Magnetic Shielding Dimensions (W x H x D) / Wt. 3-3/4W x 4-5/8H x 4-1/4D / 1.5 lbs. each

GX-700 Digital Home Theater Mini System
Center Unit Amplifier Section Min. RMS Ouput Power 75 W x 3 (main and center) + 20 W THD (37.5 W, 1 kHz, 6) 0.09% Signal-to-Noise Ratio (IHF-A-Network) 80 dB Tuner Section 40-Station AM/FM Random Access Preset Tuning CD Changer Section 3-Disc PlayXchange (carousel type) Optical Digital Out Cassette Deck Section Dolby B Frequency Response (high position) 30-16,000 Hz 3 dB Signal-to-Noise Ratio (Dolby B NR) 65 dB Dimensions (W x H x D) / Wt. 11 x 12-5/8 x 14-3/8 / 24.2 lbs. Speakers Main Speakers 3-Way Bass Reflex Design / Magnetically Shielded Woofer 5-1/8 Cone Woofer Tweeter 2 Tweeter, 3/4 Super Tweeter Input Power (max / nominal) 100 W / 50 W Impedance 6 Dimensions (W x H x D) / Wt. 11 x 4-7/16 x 6-15/16 / 4.4 lbs Effect Speakers Dual 3-18 Full-Range Drivers / Magnetically Shielded Input Power (max / nominal) 30 W / 15 W

GX-500 Mini System

Center Unit Amplifier Section Min. RMS Power Output 75 W x 2 THD (37.5 W, 1 kHz, 6) 0.09% Signal-to-Noise Ratio (IHF-A-Network) 80 dB Tuner Section 40-Station AM/FM Random Access Preset Tuning CD Changer Section 3-Disc PlayXchange (carousel type) Optical Digital Out Cassette Deck Section Dolby B Frequency Response (high position) 30-16,000 Hz 3 dB Signal-to-Noise Ratio (Dolby B NR) 65 dB Dimensions (W x H x D) / Wt. 11 x 12-5/8 x 14-3/8 / 24.2 lbs. Speakers 3-Way Bass Reflex Design / Magnetically Shielded Woofer 5-1/8 Cone Woofer Tweeter 2 Tweeter, 3/4 Super Tweeter Input Power (max / nominal) 100 W / 50 W Impedance 6 Dimensions (W x H x D) / Wt. 7-7/8 x 12-5/8 x 8-9/16 / 8.4 lbs
100Hz, 10%THD 1kHz, 10%THD

CinemaStation AV-S7

Control Center Unit Cinema DSP (Dolby Pro Logic/Enhanced) Program 3 Hi-Fi DSP Programs (Concert, Sports and Mono Movie) Dolby Pro Logic Remote Controllable Front, Center, Effect and Subwoofer Level Controls 17-Key Luminescent Lighting Remote Control that Glows in the Dark 2 Input Modes Through Terminal for Use with TVs without Audio Output Eye-Catching LED Display Cluster Angle Adjuster Dimensions (W x H x D) / Boxed Wt. 11W x 4-5/8H x 4-15/16D / 2.9 lbs. Subwoofer/Power Amplifier Unit 200 W Total Max. Output Power: Subwoofer 50W + Center/Satellites 30W x 5 Yamaha YST Technology for Deep Bass Response 8 Cone Multi-Range Driver, Magnetic Shielding Allows Placement Near the TV Dimensions (W x H x D) / Boxed Wt. 9-7/8W x 16-3/4H x 16-1/2D / 32.0 lbs. Satellite Speaker Systems 3-1/8 Full Range Speaker Magnetic Shielding Convex Bases (2) for Front Channel Speakers, and Wall Mount Brackets (2) for Effect Speakers Dimensions (W x H x D) / Wt. 3-3/4W x 4-5/8H x 4-1/4D / 1.5 lbs. each
CL-1 A/V Home Theater Package

Audio Section Minimum RMS Output Power (8 ohms) Main Ch (20 Hz-20 kHz, 0.1% THD) Center Ch (20 Hz - 20 kHz, 0.1% THD) Rear Effect Ch (1 kHz, 0.7% THD) Dynamic Power Per Channel (8/6/4/2 ohms) Frequency Response (20-20,000 Hz) CD THD CD Signal-to-Noise Ratio CD Tuner Section FM 50 dB Quieting Sensitivity Mono AM Alternate Channel Selectivity FM Signal-to-Noise Ratio (mono/stereo) Harmonic Distortion (mono/stereo) Frequency Response (20-15,000 Hz) CD AM Sensitivity CDX-10 Audio Section Harmonic Distortion + Noise Frequency Response (20-15,000 Hz) Signal-to-Noise Ratio Dynamic Range KX-W10 Audio Section Wow & Flutter WRMS Frequency Response (-20 dB) metal tape Signal-to-Noise Ratio Dolby C NR On Harmonic Distortion Dimensions (W x H x D) / Weight RX-V10 CDX-10 KX-WW 45 W 15 W 65/75/95/105 W 0.5 dB 0.2% 105 dB 1.55 V (15.1 dBf) 85 dB 80 dB / 75 dB 0.1% / 0.2% 1.5 dB 100 V/m 0.0022% 0.3 dB 118 dB 98 dB 0.09% 30 Hz - 19 kHz, 3 dB 74 dB 1.2% 11 x 4-5/8 x 15-3/8 / 13.9 lbs 11 x 3-1/4 x 14 / 13.9 lbs 11 x 4-5/8 x 14-1/8 / 12.8 lbs
YHT-22 A/V Home Theater Package
HTR-Channel A/V Home Theater Receiver (Dolby Digital) Output Power Minimum RMS Output Power Minimum RMS Output Power (8 ohms, 20-20,000 Hz, 0.04% THD) (8 ohms, 1 kHz, 0.07% THD) Main Channels 60 W x 2 Main Channels 70 W x 2 Center Channel 60 W Center Channel 70 W Rear Effect Channels 60 W x 2 Rear Effect Channels 70 W x 2 Frequency Response 20-20,000 Hz 0.5 dB THD (20-20,000 Hz): CD-Sp Out (Main) 0.03% (30 W/8) Phono-Rec Out 0.02% (1 V) Signal-to-Noise Ratio (CD, Input Shorted) 96 dB (150 mV) Dimensions (W x H x D) / Weight: 17-1/8 x 6 x 15-3/8 / 24.7 lbs YST-SW-Powered Subwoofer Midrange/Woofer 8 Spruce Cone Driver Utilizing YST Tech. Magnetically Shielded, A/V Ready Suggested Amp. Power Built-in 70 Watt Amplifier Frequency Response 30 Hz to 200 Hz Dimensions (W x H x D) 10 x 13-3/4 x 11-3/4 NS-AP327 Timbre-Matched Speaker Package 2-way Acoustic Suspension Design 1 Center Channel, 4 Main/Surround Speakers Midrange/Woofer 31/2 Polymer Coated Woofer. Magnetically Shielded, A/V Ready Tweeter 3/4 Dome Suggested Amp. Power 60 W Nominal Power Frequency Response 150 Hz to 22 Hz 3 dB Main/Surround Dimensions (W x H x D) 4-3/8 x 7-13/16 x 4 Center Channel Dimensions (W x H x D) 10-3/4 x 4-3/4 x 3-3/4
CLS-200 Home Theater Speaker Package
Carton Dimensions (W x H x D) / Wt. 26 x 25 x 25/ 96 lbs. NS-AP200X Main Speaker Package (5) main, center & surround Midrange/Woofer 5-1/4 High Compliance Glass Filled Cloth Midrange w/Inverted Dust Cover Magnetically Shielded, A/V Ready Tweeter 1 Glass Filled Cloth Dome Suggested Amp. Power 80 W Nominal Power, 160 W Music Power Acoustic Suspension Design Speaker Sensitivity 89 dB/W/M Frequency Response 55 Hz to 22 Hz 3 dB 5-way Binding Post for Flexible Connectivity Dimensions (W x H x D) / Wt. 7 x 10-3/8 x 5-5/8 / 4lbs. 12-oz. ea. SW-5 Powered Subwoofer Woofer 12 Woofer w/built-in 200 watt advanced YST Power Amplifier Magnetically Shielded, A/V Ready Frequency Response 18 Hz to 170 Hz High Cut Continuously Variable From 50 Hz to 150 Hz Dimensions (W x H x D) / Wt. 15-3/4 x 19-3/4 x 17-1/4 / 56-lbs 4 oz.

YHT-16 A/V Home Theater Package
R-VChannel A/V Home Theater Receiver (5.1 Channel Ready) Audio Section Minimum RMS Output Power Minimum RMS Output Power (8 ohms, 20-20,000 Hz, 0.04% THD) (8 ohms, 1 kHz, 0.09% THD) Main Channels 70 W x 2 Left & Right Channels 80 W Center Channel 70 W Center Channel 80 W Rear Effect Channels 20 W x 2 Rear Effect Channels 20 W x 2 Damping Factor (8, 20-20,000 Hz.) 80 Frequency Response (8, 20-20,000 Hz, CD, etc.) 0.5 dB THD (20-20,000 Hz) CD, etc. 0.03% (30 W) Phono 0.02% (1 V) Signal-to-Noise Ratio CD, etc. 93 dB (IHF-A-Network) Phono 80 dB Multiple A/V Inputs 3 A/V and 4 audio Tuner Section FM 50 dB Quieting Sensitivity Mono 1.55V (37.7 dBf) FM Alternate Ch Selectivity (IHF) 85 dB FM Signal-to-Noise Ratio (Mono/Stereo) 80 dB / 75 dB FM Harmonic Distortion (Mono/Stereo) 0.1% / 0.2% FM Frequency Response (20-15,000 Hz) 1.5 AM Usable Sensitivity; Selectivity 100V/m; 32 dB Dimensions (W x H x D) / Weight: 17-1/8 x 5-15/16 x 10-1/2 / 19.2 lbs YST-SW-Powered Subwoofer Woofer 8 Spruce Cone Driver Utilizing YST Tech. Magnetically Shielded, A/V Ready Suggested Amp. Power Built-in 70 Watt Amplifier Frequency Response 30 Hz to 200 Hz Dimensions (W x H x D) 10 x 13-3/4 x 11-3/4 NS-AP16 Timbre-Matched Speaker Package 2-way Acoustic Suspension Design Midrange/Woofer 5 Cone Woofer. Magnetically Shielded, A/V Ready Tweeter 2 Cone Suggested Amp. Power 40 W Nominal Power, 80 W Music Power Frequency Response 100 Hz to 22 Hz 3 dB Dimensions (W x H x D) / Wt. 5-9/16 x 8-3/8 x 5-3/4 / 4lbs. 2-oz.
CLS-150 Home Theater Speaker Package
Carton Dimensions (W x H x D) / Wt. 22 x 30-3/4 x 19/ 72 lbs. NS-AP425A Main Speaker Package (5) main, center & surround Midrange/Woofer 4 Grey Polymer Coated Woofer Magnetically Shielded, A/V Ready Tweeter 1/2 Ferro-Fluid Cooled Suggested Amp. Power 60 W Nominal Power, 120 W Music Power Acoustic Suspension Design Speaker Sensitivity 88 dB/W/M Frequency Response 60 Hz to 22 Hz 3 dB 5-way Binding Post for Flexible Connectivity Dimensions (W x H x D) / Wt. 6 x 9 x 4-1/4 / 3.8lbs. ea. SW-4 Powered Subwoofer Woofer 10 Woofer w/Built-in 100 Watt Advanced YST Power Amplifier Magnetically Shielded, A/V Ready Frequency Response 25 Hz to 200 Hz High Cut Continuously Variable From 50 Hz to 150 Hz Dimensions (W x H x D) / Wt 14-1/2 x 18-1/4 x 15-1/4 / 28 lbs. 9 oz.

WHERE HOME THEATER LIVES

Visit us at our web site: http://www.yamaha.com Yamaha Electronics Corporation, USA P.O. Box 6660, Buena Park, CA 90622
1999 Yamaha Electronics Corporation, USA. Cinema DSP is a trademark of Yamaha Electronics Corporation. Dolby Pro Logic and Dolby Digital are trademarks of Dolby Laboratories Licensing Corporation. Specifications subject to change without notice due to product improvements.