Yamaha RX-V357 Manual
Yamaha RX-V357 Home Cinema Amplifier, size: 661 KB
Yamaha RX-V357 Annexe 1
Here you can find all about Yamaha RX-V357 like manual and other informations. For example: av receiver, price, review.
Yamaha RX-V357 manual (user guide) is ready to download for free.
On the bottom of page users can write a review. If you own a Yamaha RX-V357 please write about it to help other people. [ Report abuse or wrong photo | Share your Yamaha RX-V357 photo ]
WHARFEDALE DIAMOND 10.1 AND YAMAHA RX V357 Michael Jackson Memorial
User reviews and opinions
No opinions have been provided. Be the first and add a new opinion/review.
5.1-Channel Digital Home Theater Receiver
NEW PRODUCT BULLETIN
Powerful 550W (110W x 5 Max) 5.1-Channel Surround Sound with Quad-Field CINEMA DSP and Many Other Exclusive Yamaha Features for a Thoroughly Enjoyable Home Theater Experience.
Gold finish available in some areas
DOLBY D I G I TA L
P R O LO G I C
High Sound Quality
5.1-Channel, 550W Powerful Surround Sound (110W x 5 Max) 192kHz/24-bit D/A Converters for All Channels Analog Mixdown
14 Surround Programs Compatible Decoding Formats Dolby Digital Dolby Digital/Matrix 6.1 DTS Digital Surround DTS/Matrix 6.1 Dolby Pro-Logic Dolby Pro Logic II Music Dolby Pro Logic II Movie HiFi DSP Programs HALL JAZZ CLUB ROCK CONCERT ENTERTAINMENT 5-CH STEREO Program Subtotal CINEMA DSP Programs ENTERTAINMENT MUSIC VIDEO TV THEATER MOVIE THEATER 1 MOVIE THEATER 2 ENHANCED Program Subtotal Program Total
Night Listening Mode and SILENT CINEMA Dolby Digital/Matrix 6.1 and DTS/Matrix 6.1 Compatibility plus Dolby Pro Logic II Decoding Quad-Field and Tri-Field CINEMA DSP and 14 Surround Programs
Concert Hall Jazz Club Rock Concert Disco 5-Channel Stereo
2 Component Video Inputs and 3 Digital inputs (Fixed and Assignable) Speaker A or B Selection 5-Band Center Graphic Equalizer
Game Music Video Mono Movie Variety/Sports Spectacle Sci-Fi Adventure General Enhanced
: HiFi DSP Programs : CINEMA DSP : Tri-Field CINEMA DSP : Quad-Field CINEMA DSP
RX-V357 5.1-Channel Digital Home Theater Receiver
High Sound Quality 5.1-Channel 500W Powerful Surround Sound (110W x5 Max; 100W x 5 RMS) The RX-V357 receiver delivers high power output to each of their five channels: two front, one center and two surround. It provides more than enough power (110W x 5 Max; 100W x 5 RMS) to fill even the largest rooms with vibrant music and rich sound effects. 192kHz/24-Bit D/A Converters for All Channels The RX-V357 uses extremely high performance 192kHz/24-bit D/A converters for all 5 channels. They perform accurate sound field reproduction for high quality multichannel sources, and for two-channel stereo, provide outstanding separation and precise musical delineation. They deliver superior low level linearity with excellent full-scale performance. High Dynamic Power Capability The RX-V357 is capable of delivering large amounts of reserve power for accurate reproduction of the high energy peaks that are especially prevalent in digital audio sources. This emphasizes the musics dynamic qualities and provides a sharper sound image. Analog Mixdown The Analog Mixdown feature lets you enjoy 5.1-channel sound from only four speakers two front and two surround. The center channel and subwoofer frequencies are mixed into the two front channels. Surround Realism Night Listening Mode and SILENT CINEMA When youre listening to movies late at night and turn down the volume during loud scenes, dynamic range suffers and you may miss some dialogue and other sounds. With the Night Listening mode, you can reduce the volume and still enjoy proper tonal balance and dynamic range. The SILENT CINEMA mode allows private listening enjoyment of multi-channel music or movies, with an accurate simulation of surround sound, through ordinary headphones. Advanced Decoding Circuitry Including Yamahas Exclusive YSS-938 32-Bit Floating Point Quantization LSI The decoding circuitry performs Dolby Digital, DTS and Dolby Pro Logic II decoding with extreme accuracy. The Dolby Digital/Matrix 6.1 and DTS/Matrix 6.1 allow the Yamahas decoding of 6.1-channel Exclusive YSSmovies (extra speakers not 938 32-Bit Floating Point necessary). Quantization LSI Quad-Field/Tri-Field CINEMA DSP and 14 Surround Programs Yamahas ultra-sophisticated Quad-Field and Tri-Field CINEMA DSP technology creates thrillingly realistic soundscapes in your room. 14 surround programs provide full format compatibility and extensive listening choices.
Advanced Facilities HDTV Compatible 2 Component Video Input and Output Terminals Component Video inputs offer higher picture quality, for use with units such as DVD players that have Component Video output. The frequency response of the component video signal is 5Hz 60MHz, making it compatible with HDTV (720p, 1080i). The RX-V357 allows you to connect two different components for a choice of high quality video sources. 3 Digital Inputs Optical and coaxial digital input terminals let you connect highquality digital devices such as a DVD player or certain cable orsatellite boxes. Speaker A or B Selection Speaker A or B Selection gives you the advantage of listening to either of two pairs of speakers. 5-Band Center Graphic Equalizer In addition to the many audio parameters that can be adjusted, the RX-V357 provides an even greater degree of sound field control with the inclusion of a Center Graphic Equalizer. This lets you finely tune the overall balance of the sound field to achieve the optimal imaging for movie sound. Other Notable Features Wide-Range Audio Frequency Response for DVD-Audio/Super Audio CD Virtual CINEMA DSP Auto Priority Input Terminal Selection and Auto Decoder Selection Preset Remote Control Unit Sleep Timer 40-Station Random Access Preset Tuning Auto Preset Tuning
RX-V357 Extensive Connections
6-Channel 4 A/V and 2 Audio 40-Station External Inputs, and 1 A/V Random Access Decoder Input and 1 Audio Outputs Preset Tuner 2 Component Video Front, L/R Center and Inputs and 1 Component Surround L/R Video Monitor Output Speaker Terminals
2 Optical and 1 Coaxial Subwoofer Composite Digital Inputs (fixed and Output Monitor Output Asssignable*)
Front L/R (A/B Selectable) Speaker Terminals
RX-V357 Main Specifications [AUDIO SECTION] Maximum Power (6 ohms, 1 kHz, 10% THD) Front Channels 110 W + 110 W Center Channel 110 W Surround Channels 110 W + 110 W Minimum RMS Output Power (6 ohms, 1 kHz, 0.9% THD) Front Channels 100 W + 100 W Center Channel 100 W Surround Channels 100 W + 100 W Dynamic Power (Front L/R) 6/4/2 ohms 105/135/165 W Frequency Response 10 Hz100 kHz +0, -3 dB Total Harmonic Distortion (1 kHz, 50 W, 6 ohms) (CD, Front Sp Out) 0.06% Signal-to-Noise Ratio (CD) 100 dB (250 mV) [VIDEO SECTION] Monitor Out Frequency Response Component Video Signal: 5 Hz-60 MHz -3 dB [TUNER SECTION] FM 50dB Quieting Sensitivity Mono 2.8 V (20.2 dBf) [GENERAL SECTION] Dimensions (W x H x D) 435 x 151 x 315 mm Weight 9 kg
* Fixed and Assignable Terminals: Yamaha offers terminals that can be either independently assigned to sources or defaulted to fixed settings.
Dolby, Pro Logic and Double D are trademarks of Dolby Laboratories Corporation. DTS and Neo:6 are trademarks of Digital Theater Systems, Inc. Product designs and specifications are subject to change without notice. d-cinema is the slogan of Yamaha A/V products and technology, reflecting our focus on digital technology and our leadership in creating and refining digital home theater.
L C R SL SR
You can also balance the speaker levels using test tone by pressing TEST on the remote control.
Press INPUT l / h repeatedly (or one of the input selector buttons on the remote control) to select the input you desire. The selected input source name and input mode appear on the front panel display for a few seconds.
Selected input source
Start playback or select a broadcast station on the source component. Refer to the operation instructions for the component. Adjust the volume to the desired level.
Press STANDBY/ON (or POWER on the remote control) to turn on the power.
or Remote control
Turn on the video monitor connected to this unit. Press SPEAKERS A/B/OFF on the front panel to select the front speakers you want to use.
If desired, use TONE CONTROL and BASS/TREBLE /+. These controls only effect the sound from the front speakers.
TONE CONTROL BASS/TREBLE
If you increase or decrease the high-frequency or the lowfrequency sound to an extreme level, the tonal quality from the center and surround speakers may not match that of the front left and right speakers. If you have connected a recording component to the VCR OUT, or MD/CD-R OUT jacks, and you notice distortion or low volume during playback from other components, try turning on the recording component.
Select a sound field program if desired. Press PROGRAM l / h (or PROG /+ on the remote control) to select a sound field program. See pages for details about sound field programs.
Playing video sources in the background
You can combine a video image from a video source with a sound from an audio source. For example, you can enjoy listening to classical music while having beautiful scenery from the video source on the video monitor. Use the input selector buttons to select a video source, then select an audio source.
Selecting the 6CH INPUT
Press 6CH INPUT until 6CH INPUT appears on the front panel display.
To mute the sound
or Front panel Remote control
Press MUTE on the remote control. MUTE blinks on the front panel display. To resume audio output, press MUTE again.
You can also cancel mute by pressing VOLUME +/, etc. You can adjust the muting level (see page 45).
If 6CH INPUT is shown on the front panel display, no other source can be played. To select another input source, first press 6CH INPUT so that 6CH INPUT disappears from the front panel display.
Night listening mode
This mode reproduces dialogue clearly while reducing the volume of loud sound effects for easier listening at low volumes or at night. Press NIGHT on the remote control. The NIGHT indicator in the front panel display lights up. Press NIGHT once more to return to normal reproduction.
You can use night listening mode with any of the sound field programs. Night listening mode may vary in effectiveness depending on the input source and surround sound settings you use.
When you have finished using this unit
Press STANDBY/ON (POWER on the remote control) to set this unit in standby mode.
Input modes and indications
This unit is equipped with 2 types of input jacks. Do the following to select the type of input signals you want to use. Press INPUT MODE repeatedly until the desired input mode is shown on the front panel display.
Automatically selects input signals in the following order: 1) Digital signals* 2) Analog signals Selects only digital signals encoded in DTS. If no DTS signals are input, no sound is output. Selects only analog signals. If no analog signals are input, no sound is output.
* If this unit detects a Dolby Digital or DTS signal, the decoder automatically switches to the appropriate sound field program.
You can adjust the default input mode on this unit (see page 44).
When you play DTS encoded CD/LDs with the input mode set to AUTO: This unit automatically switches to the DTS decoding mode. The unit remains in DTS mode (and the t indicator may flash) for up to 30 seconds after playback of the DTS source is complete. To manually release the DTS mode, press INPUT MODE to reselect AUTO. The DTS decoding mode may be released if search or skip operations are performed for more than 30 seconds. To prevent this, press INPUT MODE to select DTS. If the digital output data of the player has been processed in any way, you may not be able to perform DTS decoding even if you make a digital connection between this unit and the player.
Press 6.1/5.1 to turn on the Dolby Digital + Matrix 6.1 or DTS + Matrix 6.1 decoder.
Select a 2-channel source and start playback on the source component. Press q/DTS.
The display changes AUTOMatrix 6.1OFF each time 6.1/5.1 is pressed. AUTO: Automatically switches Dolby Digital + Matrix 6.1 and DTS + Matrix 6.1 depending on the signal. Virtual surround back speaker does not work for 5.1- channel sources. Matrix 6.1: Produces 6-channel playback of the input source using the Matrix 6.1 decoder. The virtual surround back speaker can be used when playing a 5.1-channel source. OFF: Virtual surround back speaker does not work.
VCR V-AUX DTV/CBL DVD MD/CD-R TUNER CD
The display cycles as follows each time you press q/DTS: PRO LOGICPRO LOGIC EnhancedPRO LOGIC II MoviePRO LOGIC II MusicPRO LOGIC.
You can select PRO LOGIC, PRO LOGIC Enhanced, PRO LOGIC II Movie, and PRO LOGIC II Music by pressing PROGRAM l / h on the front panel repeatedly.
Some 6.1-channel compatible discs do not have a signal (flag) that this unit can automatically detect. Select Matrix 6.1 to play these kinds of discs with 6.1-channel sound. 6.1-channel playback is not possible even if you press 6.1/5.1 in the following cases: When effects are turned off. When the source connected to the 6CH INPUT jacks is being played. When the unit is reproducing a Dolby Digital KARAOKE source. When headphones are connected to the PHONES jack. The 6.1/5.1 setting resets to AUTO when you turn the unit power off.
Virtual CINEMA DSP
With Virtual CINEMA DSP, you can enjoy all sound field programs without surround speakers. It creates virtual speakers to reproduce a natural sound field. You can listen to virtual CINEMA DSP by setting 1C SURR in the set menu to NONE. Sound field processing changes to Virtual CINEMA DSP automatically.
If you turn off the sound effects, no sound is output from the center speaker or surround speakers. If you turn off the sound effects while the unit is reproducing sound from a Dolby Digital or DTS signal, the dynamic range of the signal is automatically compressed and the unit will mix the sounds of the center and surround speaker channels and output them from the front speakers. The volume may be greatly reduced when you turn off the sound effects or if you set SOUND 4 D. RANGE (dynamic range) on the set menu to MIN. In this case turn on the sound effect.
Virtual CINEMA DSP will not activate, even when 1C SURR is set to NONE (see page 42) in the following cases: When the 5ch Stereo, DOLBY DIGITAL, Pro Logic, Pro Logic II, or DTS program is selected. When the sound effect is turned off. When 6CH INPUT is selected as the input source. When a digital signal with a sampling frequency greater than 48 kHz is input to this unit. When using the test tone. When connecting the headphones.
Recreating a sound field
Recreating the sound field of a concert hall or an opera house requires localizing the virtual sound sources in your listening room. The traditional stereo system that uses only two speakers is not capable of recreating a realistic sound field. YAMAHAs DSP requires four effect speakers to recreate sound fields based on the measured sound field data. The processor controls the strength and delay time of the signals output from the four effect speakers to localize the virtual sound sources and fully encompass the listener.
HiFi DSP programs
The following list gives you a brief description of the sound fields produced by each of the sound field programs. Keep in mind that most of these are precise digital recreations of actual acoustic environments.
No. 1 Program CONCERT HALL (except China model) HALL IN CHINA (China model only) Features A large round concert hall with a rich surround effect. Pronounced reflections from all directions emphasize the extension of sounds. The sound field has a great deal of presence, and your virtual seat is near the center, close to the stage. A large, extremely famous concert hall in China with approx. 650 seats on the first floor and approx. 500 seats on the second floor. The clear sound field of this gorgeous and majestic hall is suited especially for classic music. Your virtual seat is near the center on the first floor. This is the sound field at stage front in The Bottom Line, a famous New York jazz club, that seats up to 300 people. Its wide left to right seating arrangement offers a real and vibrant sound. The ideal program for lively, dynamic rock music. The data for this program was recorded at LAs hottest rock club. The listeners virtual seat is at the center-left of the hall. This program recreates the acoustic environment of a lively disco in the heart of a big city. The sound is dense and highly concentrated. It is also characterized by a high-energy, immediate sound. Using this program increases the listening position range. This is a sound field suitable for background music at parties, etc.
ENTERTAINMENT/ Disco ENTERTAINMENT/ 5ch Stereo
Sound design of CINEMA DSP
Filmmakers intend for the dialog to be located right on the screen, the effect sound a little farther back, the music spread even farther back, and the surround sound around the listener. Of course, all of these sounds must be synchronized with the images on the screen. CINEMA DSP is an upgraded version of YAMAHA DSP specially designed for movie soundtracks. CINEMA DSP integrates the DTS, Dolby Digital, and Dolby Pro Logic surround sound technologies with YAMAHA DSP sound field programs to provide a surround sound field. It recreates comprehensive movie sound design in your audio room. In CINEMA DSP sound field programs, YAMAHAs exclusive DSP processing is added to the Front left and right, and Center channels, so the listener can enjoy realistic dialogue, depth of sound, smooth transition between sound sources, and a surround sound field that goes beyond the screen. When a DTS or Dolby Digital signal is detected, the CINEMA DSP sound field processor automatically chooses the most suitable sound field program for that signal.
L SURROUND SOUND FIELD PRESENCE SOUND FIELD
R SURROUND SOUND FIELD
In addition to the DSP, this unit is equipped with a variety of precise decoders; Dolby Pro Logic decoder for Dolby Surround sources, Dolby Pro Logic II decoder for Dolby Surround and 2-channel sources, Dolby Digital/DTS decoder for multi-channel sources and Dolby Digital + Matrix 6.1 or DTS + Matrix 6.1 decoder for adding a surround back channel (the surround back channel is outputted from virtual surround back speaker). You can select CINEMA DSP programs to optimize these decoders and the DSP sound patterns depending on the input source.
CINEMA DSP Programs
The following list gives you a brief description of the sound fields produced by each of the sound field programs. Keep in mind that most of these are precise digital recreations of actual acoustic environments. Select the sound field program that you feel sounds best regardless of the name and description given for it below.
For audio-video sources: No. 4 to 6
No. 4 Program ENTERTAINMENT/ Game MUSIC VIDEO Features This program adds a deep and spatial feeling to video game sounds.
This program lends an enthusiastic atmosphere to the sound, giving you the feeling you are at an actual jazz or rock concert. This program is provided for reproducing monaural video sources (such as old movies). The program produces the optimum reverberation to create sound depth using only the presence sound field. Though the presence sound field is relatively narrow, the surround sound field employs the sound environment of a large concert hall. This effect enhances the experience of watching various TV programs such as news, variety shows, music programs or sports programs.
TV THEATER/ Mono Movie
TV THEATER/Variety/ Sports
For movie programs
No. 7 Program MOVIE THEATER 1 Spectacle Features This program creates the extremely wide sound field of a 70-mm movie theater. It precisely reproduces the source sound in detail, making both the video and the sound field incredibly real. This is ideal for any kind of video source encoded with Dolby Surround, Dolby Digital or DTS (especially large-scale movie productions). This program clearly reproduces dialog and sound effects in the latest sound form of science fiction films, thus creating a broad and expansive cinematic space amid the silence. You can enjoy science fiction films in a virtual-space sound field that includes Dolby Surround, Dolby Digital and DTS-encoded software employing the most advanced techniques. This program is ideal for precisely reproducing the sound design of the newest 70-mm and multichannel soundtrack films. The sound field is made to be similar to that of the newest movie theaters, so the reverberations of the sound field itself are restrained as much as possible. This program is for reproducing sounds from 70-mm and multichannel soundtrack films, and is characterized by a soft and extensive sound field. The presence sound field is relatively narrow. It spatially spreads all around and toward the screen, restraining the echo effect of conversations without losing clarity. The built-in decoder reproduces source sounds and sound-effects precisely. No DSP effect is applied in this program. This program ideally simulates the multi-surround speaker systems of the 35-mm film theaters. Dolby Pro Logic decoding, Dolby Digital decoding or DTS decoding and digital sound field processing create precise effects without altering the original sound orientation. The surround effects produced by this sound field wrap around the viewer naturally from the back to the left and right, and toward the screen.
Press TUNING MODE (AUTO/MANL MONO) until the AUTO indicator lights up on the front panel display.
Press and hold MEMORY (MANL/AUTO FM) for more than 3 seconds. The preset number, the MEMORY and AUTO indicators flash. After about 5 seconds, automatic presetting starts from the frequency currently displayed and proceeds toward the higher frequencies.
When automatic preset tuning is completed, the front panel display shows the frequency of the last preset station.
Manually presetting stations
You can store up to 40 stations (8 stations x 5 groups) manually.
Press PRESET/TUNING l / h to select a preset station number (1 to 8) while the MEMORY indicator is flashing. Press h to select a higher preset station number. Press l to select a lower preset station number.
MODE PTY SEEK START
C3:AM 1440 kHz
Tune into a station. See page 32 for tuning instructions.
VCR V-AUX DTV/CBL DVD MD/CD-R C
Press MEMORY (MANL/AUTO FM) on the front panel while the MEMORY indicator is flashing. The station band and frequency appear on the front panel display with the preset group and number you have selected.
When tuned in to a station, the front panel display shows the frequency of the station received.
Press MEMORY (MANL/AUTO FM). The MEMORY indicator flashes for about 5 seconds.
Shows the displayed station has been stored as C3.
Press A/B/C/D/E repeatedly to select a preset station group (A to E) while the MEMORY indicator is flashing. The group letter appears. Check that the colon (:) is showing on the front panel display.
Repeat steps 1 to 5 to store other stations.
Any stored station data existing under a preset number is cleared when you store a new station under that preset number. The reception mode (stereo or monaural) is stored along with the station frequency.
C :AM 1440 kHz
Selecting preset stations
You can tune any desired station simply by selecting the preset station number under which it was stored.
Exchanging preset stations
You can exchange the assignment of two preset stations with each other. The example below describes the procedure for exchanging preset station E1 with A5.
EDIT NEXT SET MENU MAN'L/AUTO FM AUTO/MAN'L MONO
PRESET 6.1/5.1 NIGHT SLEEP
2, 4 1, 3 1, 3
Select preset station E1 using A/B/C/D/E and PRESET/TUNING l / h. See Selecting preset stations at left. Press and hold PRESET/TUNING (EDIT) for more than 3 seconds. E1 and the MEMORY indicator flash on the front panel display.
Press A/B/C/D/E (or A/B/C/D/E on the remote control) to select the preset station group. The preset group letter appears on the front panel display and changes each time you press A/B/C/D/E.
Select preset station A5 using A/B/C/D/E and PRESET/TUNING l / h. A5 and the MEMORY indicator flash on the front panel display.
Press PRESET/TUNING l / h (or PRESET /+ on the remote control) to select a preset station number (1 to 8). The preset group and number appear on the front panel display along with the station band, frequency and the TUNED indicator lights up.
Press PRESET/TUNING (EDIT) again. The stations stored at the two preset assignments are exchanged.
Shows the exchange of stations has been completed. Remote control
RECEIVING RADIO DATA SYSTEM STATIONS
Radio Data System is a data transmission system used by FM stations in many countries. Radio Data System data contains a variety of information such as PS (Program Service name), PTY (Program Type), RT (Radio Text), CT (Clock Time), EON (Enhanced Other Networks), and others.
Description of Radio Data System data
This unit can receive, PS, PTY, RT, CT, and EON data when tuned to stations broadcasting Radio Data System.
Changing the Radio Data System mode
This unit provides four modes for displaying Radio Data System data. The PS, PTY, RT and/or CT mode indicators that correspond to the Radio Data System data services offered by the station light up on the front panel display when an Radio Data System station is being received. Press FREQ/TEXT repeatedly to cycle the display through the Radio Data System data offered by the transmitting station in the order shown below.
PS (Program Service name) mode:
The name of the Radio Data System station being received is displayed.
PTY (Program Type) mode:
There are 15 program types used to classify Radio Data System stations.
NEWS AFFAIRS INFO SPORT EDUCATE DRAMA CULTURE SCIENCE VARIED POP M ROCK M M.O.R. M LIGHT M CLASSICS OTHER M News Current affairs General information Sports Education Drama Culture Science Light entertainment Pops Rock Middle-of-the-road music (easy-listening) Light classics Serious classics Other music
Radio Data System mode OFF
Do not press FREQ/TEXT when an Radio Data System station is being received until one or more Radio Data System mode indicators light up on the front panel display. You cannot change the mode if you press this button prior to this. This is because this unit has not finished receiving all of the Radio Data System data on the station. Radio Data System data not offered by the station cannot be selected. This unit cannot utilize the Radio Data System data service if the signal received is not strong enough. In particular, the RT mode requires a large amount of data, so it is possible that the RT mode may not be displayed even if other Radio Data System modes (PS, PTY, etc.) are displayed. Sometimes, Radio Data System data cannot be received in poor reception conditions. If this is the case, press TUNING MODE so that the AUTO indicator disappears from the front panel display. Although this will change the reception mode to monoaural, Radio Data System data may be displayed when you change the display to Radio Data System mode. If the signal strength is weakened by external interference during the reception of an Radio Data System station, the Radio Data System data service may cut off suddenly and.WAIT will appear on the front panel display.
RT (Radio Text) mode:
Information about the program (such as the title of the song, name of the singer, etc.) on the Radio Data System station being received is displayed using a maximum of 64 alphanumeric characters, including the umlaut symbol. Any other characters used in RT data are displayed with under-bars.
CT (Clock Time) mode:
The current time is displayed and updated every minute. CT WAIT may appear if the data is accidentally cut off.
EON (Enhanced Other Networks):
Refer to the following page.
PTY SEEK function
If you select the desired program type, the unit automatically searches all preset Radio Data System stations that are broadcasting a program of the required type.
This function uses the EON data service on the Radio Data System station network. If you select the desired program type (NEWS, INFO, AFFAIRS or SPORT), the unit automatically searches for all preset Radio Data System stations that are scheduled to broadcast a program of the required type and switches from the station being currently received to the new station when the broadcast starts.
Press PTY SEEK MODE to set the unit in PTY SEEK mode. The program type of the station the unit is currently receiving , or NEWS flashes on the front panel display. To exit from the PTY SEEK mode, press PTY SEEK MODE again.
This function can only be used when an Radio Data System station that offers the EON data service is being received. When the unit is tuned to such a station, the EON indicator lights up on the front panel display.
Press PRESET/TUNING l / h to select the desired program type. The selected program type appears on the front panel display.
Check that the EON indicator lights up on the front panel display. If the EON indicator does not light up, tune in to another Radio Data System station so that the EON indicator lights up.
Press EON repeatedly to select the desired program type (NEWS, INFO, AFFAIRS or SPORT). The selected program type name appears on the front panel display.
Press PTY SEEK START to begin searching all preset Radio Data System stations. The selected program type flashes and the PTY HOLD indicator lights up on the front panel display while the unit is searching for stations. To cancel searching, press PTY SEEK START again.
If a preset Radio Data System station of the selected program type starts broadcasting, the unit will automatically switch from the program being currently received to that program. (EON indicator flashes.) When broadcasting of the required program ends, the unit returns to the previous station (or another program on the same station).
The unit will stop searching if a station that is broadcasting a program of the required type is found. If the station found is not the desired one, press PTY SEEK START again. The unit begins searching for another station that is broadcasting a program of the same type.
To cancel this function
Press EON repeatedly until the program type name disappears from the front panel display.
Use this feature to automatically set this unit in the standby mode after a certain amount of time. The sleep timer is useful when you are going to sleep while this unit is playing or recording a source. The sleep timer can only be set with the remote control.
Canceling the sleep timer
Press SLEEP repeatedly until SLEEP OFF appears on the front panel display. After a few seconds, SLEEP OFF disappears, and the SLEEP indicator goes off.
By connecting a commercially available timer to this unit, you can also set a wake-up timer. Refer to the operation instructions of the timer.
Setting the sleep timer
The sleep timer setting can also be canceled by pressing POWER on the remote control (or STANDBY/ON on the front panel) to set this unit to the standby mode.
Select a source and start playback on the source component.
SLEEP Press SLEEP repeatedly to set the amount of time. Each time you press SLEEP, the front panel display changes as shown below. The SLEEP indicator flashes while switching the amount of time for sleep timer.
SOUND 3 LFE LEVEL
Use to adjust the output level of the LFE (low-frequency effect) channel according to the capacity of your subwoofer or headphones. The LFE channel carries lowfrequency special effects which are only added to certain scenes. This setting is effective only when this unit decodes Dolby Digital or DTS signals. Control range: SP LFE (Speaker). 20 to 0 dB HP LFE (Headphone). 20 to 0 dB Initial setting: 0 dB
Press u / d to select UNIT. Press /+ to select the unit meters or feet to be used in setting. Press u / d to select a speaker. Press /+ to set the distance. Press for higher values and + for lower values.
Press u / d to select the item to be adjusted. Press to adjust the LFE level.
Adjust the LFE level according to the capacity of your subwoofer or headphones.
C L C R
SOUND 4 D. RANGE (dynamic range)
Use this feature to adjust the dynamic range. This setting is effective only when the unit is decoding Dolby Digital signals.
Choices: MIN (minimum), STD (standard), MAX (maximum) MIN Select MIN for listening to sources at low volume levels.
Setting by meters
Control range: Initial settings: 0.3 to 24.0 m (for front L/R, center, surround L/R) 3.00 m (for front L/R, center, surround L/R) 1.0 to 80.0 ft (for front L/R, center, surround L/R) 10.0 ft (for front L/R, center, surround L/R)
STD Select STD for general use. MAX Select MAX for feature films.
Setting by feet
Control range: Initial settings:
No delay will be set if you set the same distance for the front L/R and center, or the surround L/R.
SOUND 5 CENTER GEQ (center graphic equalizer)
Use this feature to adjust the built-in 5-band graphic equalizer so that the center speaker tonal quality matches that of the left and right front speakers. You can select the 100 Hz, 300 Hz, 1 kHz, 3 kHz, or 10 kHz frequencies. Control range (dB): 6 to +6 Initial setting: 0 dB for 5-band
INPUT 1 I/O ASSIGN (input/ output assignment)
You can assign jacks according to the component to be used if this units initial settings do not correspond to your needs. Change the following parameters to reassign the respective jacks and effectively connect more components. Once the inputs have been reassigned, you can select the corresponding component by using INPUT l / h on the front panel or the input selector buttons on the remote control. For COMPONENT VIDEO jacks A (1A[A]) and B (1A[B]) Choices: [A] VCR, V-AUX, DTV/CBL, DVD [B] VCR, V-AUX, DTV/CBL, DVD For OPTICAL INPUT jacks 1 (1B(1)) and 2 (1B(2)) Choices: (1) VCR, V-AUX, DTV/CBL, DVD, MD/CD-R, CD (2) VCR, V-AUX, DTV/CBL, DVD, MD/CD-R, CD For COAXIAL INPUT jack 3 (1C(3)) Choices: VCR, V-AUX, DTV/CBL, DVD, MD/CD-R, CD
ADVANCED OPERATION English
ADVANCED SETUP MENU
The ADVANCED SETUP menu is displayed in the front panel display.
ADVANCED SETUP menu items
Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening environment. Factory presets PRESET Use to reset all parameters to the factory presets (see page 53). Choices: CANCEL, RESET Select CANCEL if you do not want this units parameters to be initialized. Select RESET if you want all of this unit's parameters to be initialized.
During the advanced setup procedure, audio output is muted. During the advanced setup procedure, only the STANDBY/ ON, STEREO (EFFECT) and PROGRAM l / h buttons on the front panel are available for operation.
This setting does not affect ADVANCED SETUP menu item parameters.
Turn off the power to this unit, and while holding down STEREO (EFFECT), press STANDBY/ON. This unit turns on, and PRESET appears in the front panel display.
While holding down, press
Press STEREO (EFFECT) repeatedly to toggle between the available parameters.
Press STANDBY/ON to confirm your selection.
This completes the advanced setup procedure. The settings you made are reflected the next time this unit's power is turned on.
SETTING THE SPEAKER LEVELS
Adjusting the speaker levels during playback
You can adjust the output level of each speaker while listening to sound playback.
PROG MUTE PROG
Using the test tone
Use the test tone to set speaker levels so that the volume from each speaker is identical when heard from your listening position.
Press LEVEL repeatedly to select the speaker you want to adjust. The unit cycles through the speakers in the following order each time you press LEVEL: FRONT LCENTERFRONT R SUR R. (surround R)SUR L. (surround L) SWFR (subwoofer)..
Press TEST. The unit will output a test tone. Press u / d repeatedly to select a speaker to adjust. Each time you press d, the unit will cycle through the speakers in the following order: TEST LEFT (front L)TEST CENTER (center) TEST RIGHT (front R)TEST SUR.R (surround R)TEST SUR.L (surround L)TEST SUBWOOFER (subwoofer).. (Press u to cycle the speakers in the reverse order.) Press /+ to adjust the speaker output level. Press TEST when you have completed your adjustment. The test tone halts.
This unit has been exposed to a strong external electric shock (such as lightning and strong static electricity). No sound. Incorrect input or output cable connections. No appropriate input source is selected.
The speaker connections are not secure. The front speakers to be used have not been selected properly. The volume is turned down. The sound is muted.
The signals this unit cannot reproduce are being received from a source component e.g.: a CD-ROM. The sound suddenly goes off. The protection circuitry has been activated because of a short circuit, etc. The sleep timer has turned the unit off. The sound is muted.
Check that the speaker wires are not touching each other and then turn the unit back on. Turn on the power, and play the source again. Press MUTE or any operation buttons on the unit to cancel a mute and adjust the volume. Connect the cables properly. If the problem persists, the cables may be defective.
No sound / weak sound from particular speakers. No sound from the effect speakers.
Incorrect cable connections.
The sound effect is switched off. A Dolby Surround, Dolby Digital or DTS decoding program is being used with material not encoded with Dolby Surround, Dolby Digital or DTS. A digital signal with a sampling frequency of greater than 48 kHz is input to this unit.
Press STEREO to turn it on. Select another sound field program.
No sound from the center speaker.
The output level of the center speaker is set to minimum. SOUND 1A CENTER on the set menu is set to NONE. One of the HiFi DSP programs (1 to 4) has been selected (except for 5ch Stereo). The source encoded with a Dolby Digital or DTS signal does not have a center channel signal.
Raise the level of the center speaker.
Select the appropriate mode for your center speaker.
Select another sound field program.
No sound from the surround speakers.
The output level of the surround speakers is set to minimum. A monaural source is being played with program 9.
Raise the output level of the surround speakers.
No sound from the subwoofer.
SOUND 1D BASS on the set menu is set to FRNT when a Dolby Digital or DTS signal is being played. SOUND 1D BASS on the set menu is set to SWFR or FRNT when a 2-channel source is being played. The source does not contain low bass signals (90 Hz and below).
Select SWFR or BOTH.
Poor bass reproduction.
SOUND 1D BASS on the set menu is set to SWFR or BOTH and your system does not include a subwoofer. The speaker mode settings (front, center or surround) on the set menu does not match your speaker configuration.
KDC-1011S Laserjet 4350 FS-1800 Review SCX-4300 ETS L204WTX-SF Tecra M2 Impressa E40 FZ6-2005 Action Grimlock SA-EN17 EL-2901piii Travelmate-4050 DMR-XS385 MRP-M350 Lexmark C920 VP-D34I Shine-KE970 F1040 LX-M340A Fostex FD-4 WD-12490TP AL1932 P3600 GPS DMC-ZS1 Garros Av Receiver HA-830 E DSR9500A-VIA VGN-BX51VN CS770 Mcintosh MC30 Canon L200 Aficio 1060 PSR-201 MD101 F70EXR Indianapolis FIM 2010 SU-A800mk2 32LD8700UA Smartphones Lexmark T420 Calculator T720 Cdma GR-DF420 GT-8300UF Ii 60 Equinox Boss DD-7 MC 2569 WD-80151TUP Camry-2002 2152 CWH FWD-40LX2F C6500E 32LD6600 Temporis 10 EX774N DSC-S800 YP-T9JQB 14PT1501 WV-NS202A Adv Info ES-FG55 Cartridges TTM310 HBH-602 AEG-electrolux N22 FG-1008 Fantasy 29E31S LE46A956d1M Euroset 825 DA1102 Casablanca CD52 Logicom G352 SCH-V910 LN32C450e1M 700 TV 32LG70 Optio V20 TA-F35 Qosmio G10 MWG 733 SHR-5162P P5260I EPL-N7000 KF224 FG-701 NRX-4 EVS7000 Kddv4200J-KD-dv4200 Star Wars Price TM 6120 XTZ125-2007 TR550 H55 HD Samsung 171S Canon HV30 Server
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101