Yamaha RX-V457 Manual
Yamaha RX-V457 Home Cinema Amplifier, size: 983 KB
Yamaha RX-V457 Annexe 1
Here you can find all about Yamaha RX-V457 like manual and other informations. For example: specs, price, review.
Yamaha RX-V457 manual (user guide) is ready to download for free.
On the bottom of page users can write a review. If you own a Yamaha RX-V457 please write about it to help other people. [ Report abuse or wrong photo | Share your Yamaha RX-V457 photo ]
Yamaha RX v457 zu wenig B sse?
User reviews and opinions
|Ron||5:52am on Wednesday, September 22nd, 2010|
|This is a great unit for the money. as an entry level system it has a ton of features and sounds great|
|AlexMax||11:48am on Wednesday, June 23rd, 2010|
|I had this receiver hooked up to Wharfedale 9.5 as my main, Wharfedale 9cs as my center, Wharfedale 9sr as my rear. Excellent sound! If you have a good subwoofer it does really good in provideing the soul shaking bass. Very impressive reciever.|
Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.
6.1-Channel Digital Home Theater Receiver
NEW PRODUCT BULLETIN
Full-Function, High-Power 750W (125W x 6 Max) / 510W (85W x 6 RMS) 6.1-Channel Receiver with Special Features like Quad-Field CINEMA DSP and Night Listening Enhancer, Plus Much More.
Gold finish available
High Sound Quality
6.1-Channel, 750W (125W x 6 Max) / 510W (85W x 6 RMS) Powerful Surround Sound Digital ToP-ART and High Current Amplification Direct Stereo for High Quality 2-Channel Sound Reproduction 192kHz/24-Bit DACs for All Channels
Night Listening Enhancer (Cinema/Music) and SILENT CINEMA Dolby Digital EX, DTS-ES, Dolby Pro Logic IIx and DTS 96/24 Compatibility Quad-Field CINEMA DSP and 14 Surround Programs Audio Delay for Adjusting Lip-Sync (0160ms)
14 Surround Programs Compatible Decoding Formats Dolby Digital Dolby Digital EX DTS Digital Surround DTS 96/24 DTS-ES Matrix 6.1 DTS-ES Discrete 6.1 Dolby Pro Logic Dolby Pro Logic II Music Dolby Pro Logic II Movie Dolby Pro Logic II Game Dolby Pro Logic IIx Music Dolby Pro Logic IIx Movie Dolby Pro Logic IIx Game DTS Neo:6 Music DTS Neo:6 Cinema HiFi DSP Programs HALL JAZZ CLUB ROCK CONCERT ENTERTAINMENT 6-CH STEREO Program Subtotal CINEMA DSP Programs ENTERTAINMENT MUSIC VIDEO TV THEATER MOVIE THEATER 1 MOVIE THEATER 2
5 9 14
Concert Hall Jazz Club Rock Concert Disco 6-Channel Stereo
Selectable 9-Band Subwoofer Crossover / Subwoofer Phase Select Luminescent Preset Remote Unit with Colored Buttons
High Picture Quality
2 Component Video Inputs and 3 Digital Inputs 3 S-Video Inputs
ENHANCED Program Subtotal Program Total
Game Music Video Mono Movie Variety/Sports Spectacle Sci-Fi Adventure General Enhanced
: HiFi DSP Programs : CINEMA DSP : Tri-Field CINEMA DSP : Quad-Field CINEMA DSP
RX-V457 6.1-Channel Digital Home Theater Receiver
High Sound Quality Digital ToP-ART and High Current Amplification The Digital ToP-ART design concept combines the latest and best technologies, parts and circuit designs to maximize sound quality. High Current Amplification uses superior components to achieve high current power with low impedance from input (power supply circuit) to output (speaker terminals). Direct Stereo Direct Stereo causes the input stereo signal to bypass the DSP circuitry so the pure signal is output without any processing or data loss whatsoever. 192kHz/24-Bit DACs for All Channels The RX-V457 uses extremely high performance 192kHz/24-bit DACs for all 6 channels. They perform accurate sound field reproduction for high quality multi-channel sources, and for two-channel stereo, provide outstanding separation and precise musical delineation. They deliver superior low level linearity with excellent full-scale performance. Surround Realism Night Listening Enhancer and SILENT CINEMA During low-volume listening, such as late at night, dynamic range suffers and you may miss some sounds. The Night Listening Enhancer offers two modes, Cinema and Music, with three-level selectability, which will ensure that you dont miss movie dialogue or quiet passages, or lose overall surround spaciousness. It works for all surround programs, including Dolby Pro Logic IIx. The SILENT CINEMA mode allows private listening enjoyment of multichannel music or movies, with an accurate simulation of surround sound, through ordinary headphones. Compatible Decoding Formats The RX-V457 performs Dolby Pro Logic IIx, Dolby Digital, Dolby Digital EX, DTS Digital Surround, DTS-ES Matrix 6.1, DTS-ES Discrete 6.1, DTS Neo:6 and DTS 96/24 decoding with extreme accuracy. Quad-Field/Tri-Field CINEMA DSP and 14 Surround Programs Yamahas ultra-sophisticated Quad-Field and Tri-Field CINEMA DSP technology creates thrillingly realistic soundscapes in your room. 14 surround programs provide full format compatibility and extensive listening choices. Audio Delay for Lip Sync (0-160ms) The latest display devices perform complex internal processing, causing time lag in the video signal. It is a small time difference, but because the audio arrives first, the viewer may feel that something is not natural. The Audio Delay function for Lip Sync, matches the audio to the timing of the output of the video on the screen, correcting the audio video time lag. Advanced Facilities Subwoofer Crossover Selection / Subwoofer Phase Select The RX-V457 provides a choice of nine subwoofer crossover frequencies: 40, 60, 80, 90, 100, 110, 120, 160 and 200 Hz. In addition to providing a wider range than other receivers, the steps from 80 to 120 Hz are only 10 Hz apart for more precise selection. Another feature for optimum bass sound. If bass is weak or muddy, switching the phase of the subwoofer will often improve performance.
High Picture Quality HDTV Compatible 2 Component Video Input and Output Terminals Component Video inputs offer higher picture quality, for use with units such as DVD players that have Component Video output. The frequency response of the component video signal is 5Hz 60MHz, making it compatible with HDTV (720p, 1080i). The RX-V457 allows you to connect two different components for a choice of high quality video sources. 3 Digital Inputs Optical and coaxial digital input terminals let you connect high quality digital devices such as a DVD player or certain cable or satellite boxes. Other Notable Features Straight/Effect Switch 2-Channel Stereo Mode Analog Mixdown High Dynamic Power, Low Impedance Drive Capability Linear Damping prevents unwanted speaker cone movement Wide-Range Audio Frequency Response for DVD-Audio/Super Audio CD Compatibility Speaker A, B or A+B Selection (Front L/R) Front Panel Video Aux Terminals 3 S-Video Inputs Wide-Range Video Bandwidth (60MHz -3dB) Virtual CINEMA DSP 6-Channel External Decoder Input for Enjoying DVD-Audio/Video or Super Audio CD Luminescent Preset Remote Control Unit with Colored Buttons Sleep Timer 40-Station AM/FM Random Access Preset Tuning Auto Preset Tuning
RX-V457 Extensive Connections
2 Optical and 1 Coaxial Digital Inputs 6-Channel External Decoder Input 2 Component Video Inputs and 1 Component Video Monitor Output
4* A/V and 2 Audio Inputs, and 1 A/V and 1 Audio Outputs (* including Front Panel Video Aux Terminals)
S-Video and Composite Monitor Output
Front L/R (Speaker A, B or A+B Selection) Speaker Terminals
6-Channel (Front, Center, Surround and Surround Back) Speaker Terminals
RX-V457 Main Specifications Maximum Power (8 ohms, 1 kHz, 10% THD) Front Channels 125 W + 125 W Center Channel 125 W Surround Channels 125 W + 125 W Surround Back Channel 125 W Minimum RMS Output Power (8 ohms, 20 Hz20 kHz, 0.09% THD) Front Channels 85 W + 85 W CentER Channel 85 W Surround Channels 85 W + 85 W Surround Back Channel 85 W Dynamic Power (1 kHz) (8/6/4/2 ohms) 115 W/150 W/185 W/230 W Damping Factor (8 ohms, 20 Hz20 kHz) 120 (speaker A) Frequency Response 10 Hz100 kHz +0, -3 dB Total Harmonic Distortion (CD, Front Sp Out) (40 W/8 ohms) 0.06% Signal-to-Noise Ratio (CD) 100 dB (250 mV) Monitor Out Frequency Response Component Video Signal: 5 Hz-60 MHz -3 dB FM 50dB Quieting Sensitivity (Mono) 2 V (17.3 dBf) (Stereo) 25 V (39.2 dBf) FM Selectivity (400 kHz) 70 dB Standby Power Consumption 0.1 W Dimensions (W x H x D) 435 x 161 x 416 mm Weight 11 kg d-cinema is the slogan of Yamaha A/V products and technology, reflecting our focus on digital technology and our leadership in creating and refining digital home theater.
Dolby, Pro Logic and Double D are trademarks of Dolby Laboratories Corporation. DTS, DTS-ES and Neo:6 are trademarks of Digital Theater Systems, Inc. Product designs and specifications are subject to change without notice.
What is a sound field.. 67 Changing parameter settings.. 67
FM/AM TUNING.. 33
Automatic and manual tuning.. 33 Presetting stations.. 34 Selecting preset stations.. 36 Exchanging preset stations.. 37
SOUND FIELD PARAMETER DESCRIPTIONS..69 TROUBLESHOOTING..71 RESETTING THE FACTORY PRESETS.75 GLOSSARY...76
Audio formats... 76 Sound field programs.. 77 Audio information... 77 Video signal information... 78
XM SATELLITE RADIO TUNING. 39
What is XM Satellite Radio?.. 39 XM Satellite Radio connections.. 39 XM Satellite Radio functions.. 39 Activating XM Satellite Radio.. 40 Basic XM Satellite Radio operations.. 41 XM Satellite Radio search modes.. 42 Setting XM Satellite Radio preset channels. 45
Built-in 6-channel power amplifier
Minimum RMS output power (0.06% THD, 20 Hz to 20 kHz, 8 ) Front: 85 W + 85 W Center: 85 W Surround: 85 W + 85 W Surround back: 85 W
Sophisticated AM/FM tuner
40-station random and direct preset tuning Automatic preset tuning Preset station shifting capability (preset editing)
XM Satellite Radio
XM Satellite Radio programming (using the XM Connect and Play digital antenna accessory, sold separately)
Sound field features
Proprietary YAMAHA technology for the creation of sound fields Dolby Digital/Dolby Digital EX decoder DTS/DTS-ES Matrix 6.1, Discrete 6.1, DTS Neo:6, DTS 96/24 decoder Dolby Pro Logic/Dolby Pro Logic II/ Dolby Pro Logic IIx decoder Virtual CINEMA DSP SILENT CINEMA
192-kHz/24-bit D/A converter A SET MENU that provides you with items for optimizing this unit for your audio/video system 6 additional input jacks for discrete multi-channel input S-video signal input/output capability Component video input/output capability Optical and coaxial digital audio signal jacks Sleep timer Cinema and music night listening modes Remote control with preset remote control codes
y indicates a tip for your operation. Some operations can be performed by using either the buttons on the main unit or on the remote control. In cases when the button names differ between the main unit and the remote control, the button name on the remote control is given in parentheses. This manual is printed prior to production. Design and specifications are subject to change in part as a result of improvements, etc. In case of differences between the manual and product, the product has priority.
Press the part and slide the battery compartment cover off. Insert four supplied batteries (AAA, R03, UM-4) according to the polarity markings (+ / ) on the inside of the battery compartment. Slide the cover back until it snaps into place.
If the remote control is without batteries for more than 2 minutes, or if exhausted batteries remain in the remote control, the contents of the memory may be cleared. When the memory is cleared, insert new batteries, set up the remote control code and program any acquired functions that may have been cleared.
CONTROLS AND FUNCTIONS
SEARCH MODE EDIT
l PRESET/TUNING/CH h
INPUT PHONES SPEAKERS A B STRAIGHT l PROGRAM h INPUT MODE
VIDEO AUX MULTI CH INPUT
1 STANDBY/ON Turns on this unit or sets it to the standby mode. When you turn on this unit, you will hear a click and there will be a 4 to 5-second delay before this unit can reproduce sound. Note
In standby mode, this unit consumes a small amount of power in order to receive infrared-signals from the remote control.
6 A/B/C/D/E, NEXT, CATEGORY* Selects one of the 5 preset station groups (A to E) when the unit is in tuner mode. Selects the speaker channel to be adjusted when the unit is not in tuner mode. 7 PRESET/TUNING/ CH* l / h, LEVEL /+ Selects preset station number 1 to 8 when the colon (:) is displayed next to the band indication in the front panel display when the unit is in tuner mode. Selects the tuning frequency when the colon (:) is not displayed. Adjusts the level of the speaker channel selected using A/B/C/D/E (NEXT) when the unit is not in tuner mode. 8 MEMORY (MANL/AUTO FM) Stores a station in the memory. Hold down this button for more than 3 seconds to start automatic preset tuning. 9 TUNING MODE (AUTO/MANL MONO), DISPLAY* Switches between automatic tuning (AUTO indicator on) and manual tuning (AUTO indicator off).
2 Remote control sensor Receives signals from the remote control. 3 Front panel display Shows information about the operational status of this unit. 4 PRESET/TUNING (EDIT), SEARCH MODE* Switches the function of PRESET/TUNING/CH l / h (LEVEL /+) between selecting preset station numbers and tuning. 5 FM/AM, XM* Switches the reception band when the unit is in tuner mode.
0 VIDEO AUX jacks Input audio and video signals from a portable external source such as a game console. To reproduce source signals from these jacks, select V-AUX as the input source. A VOLUME Controls the output level of all audio channels. This does not affect the REC OUT level. B PHONES (SILENT CINEMA) jack Outputs audio signals for private listening with headphones. When you connect headphones, no signals are output to the OUTPUT jacks or to the speakers. All Dolby Digital and DTS audio signals are mixed down to the left and right headphone channels. C SPEAKERS A/B Turns on or off the set of front speakers connected to the A and/or B terminals on the rear panel each time the corresponding button is pressed. D STRAIGHT (EFFECT) Switches the sound fields off or on. When STRAIGHT is selected, input signals (2-channel or multi-channel) are output directly from their respective speakers without effect processing. E TONE CONTROL Use to adjust the bass/treble balance for the front left and right speakers (see page 26). F BASS/TREBLE /+ Use to adjust the bass/treble balance for the front left and right speakers (in conjunction with CONTROL). G PROGRAM l / h Use to select sound field programs (see page 26). H INPUT MODE Sets the priority (AUTO, DTS, ANALOG) for the type of signals received when one component is connected to two or more of this units input jacks (see page 31). I INPUT selector Selects the input source you want to listen to or watch. J MULTI CH INPUT Selects the source connected to the MULTI CH INPUT jacks. When selected, the MULTI CH INPUT source takes priority over the source selected with INPUT (or the input selector buttons on the remote control).
6 CINEMA DSP indicator Lights up when you select a CINEMA DSP sound field program. 7 AUTO indicator Lights up to indicate that automatic tuning is possible. 8 TUNED indicator Lights up when this unit is tuned into a station. 9 STEREO indicator Lights up when this unit is receiving a strong signal for an FM stereo broadcast while the AUTO indicator is lit.
K 96/24 indicator Lights up when a DTS 96/24 signal is input to this unit. L LFE indicator Lights up when the input signal contains the LFE signal. M Input channel indicators/speaker indicators Indicate the channel components of the current digital input signal. Indicate the number of speakers connected in SPEAKERS (page 23), or indicate the channel being adjusted in SP LEVEL (page 57). INTRODUCTION
COMPONENT VIDEO Y PB PR
MULTI CH INPUT R L
AM ANT GND
+ + +
7 SUBWOOFER OUTPUT jack See page 13 for connection information. 8 Antenna terminals See page 19 for connection information. 9 Speaker terminals See page 13 for connection information.
1 DIGITAL INPUT jacks See pages 15, 17 and 18 for details. 2 MULTI CH INPUT jacks See page 16 for connection information. 3 Video component jacks See pages 15 and 17 for connection information. 4 XM jack See page 39 for connection information. 5 AC OUTLET(S) Use to supply power to your other A/V components (see page 20). 6 Audio component jacks See page 18 for connection information.
Asia and General models only
VOLTAGE SELECTOR See page 20.
The speaker layout below shows the standard ITU-R* speaker setting. You can use it to enjoy CINEMA DSP and multi-channel audio sources.
* ITU-R is the radio communication sector of the ITU
Surround speakers (SR and SL)
The surround speakers are used for effect and surround sounds. Place these speakers behind your listening position, facing slightly inwards, about 1.8 m (6 ft) above the floor.
Surround back speaker (SB)
The surround back speaker supplements the surround speakers and provides for more realistic front-to-back transitions. Place this speaker directly behind the listening position and at the same height as the surround speakers. PREPARATION
Front panel or
STEREO MUSIC ENTERTAIN MOVIE
You can adjust the tonal quality TONE CONTROL of your front left and right speakers or headphones (when connected). Press TONE CONTROL on the front panel repeatedly to select TREBLE or BASS, then press BASS/TREBLE /+ repeatedly to increase or decrease. Select TREBLE to adjust the high frequency response. Select BASS to adjust the low frequency response.
Speaker and headphone adjustments are stored independently.
If you increase or decrease the high-frequency or low-frequency sound to an extreme level, the tonal quality of the surround speakers may not match that of the front left and right speakers. TONE CONTROL is not effective with the Direct Stereo program (page 30) or MULTI CH INPUT. When TC BYPASS is set to AUTO (page 58), and BASS and TREBLE are set to 0 dB, audio output automatically bypasses this units tone control circuitry.
To listen with headphones (SILENT CINEMA)
SILENT CINEMA allows you to enjoy multi-channel music or movie sound, including Dolby Digital and DTS surround, through ordinary headphones. SILENT CINEMA activates automatically whenever you connect headphones to the PHONES jack while listening to CINEMA DSP or HiFi DSP sound field programs. When activated, the SILENT CINEMA indicator lights up in the front panel display. Notes
This unit will not be set to SILENT CINEMA when MULTI CH INPUT is selected as the input source. SILENT CINEMA is not effective when the Direct Stereo or 2ch Stereo program is selected, or in STRAIGHT mode.
To mute the sound
Press MUTE on the remote control. The MUTE indicator flashes in the front panel display. To resume the audio output, press MUTE again (or press VOLUME /+). The MUTE indicator disappears from the display. y
You can adjust the muting level (see page 58).
Selecting MULTI CH INPUT
Press MULTI CH INPUT (or MULTI CH IN on the remote control) so that MULTI CH INPUT appears in the front panel display.
Feel free to choose a sound field program based on your listening preference, and not purely on the name of the program itself.
When you select an input source, this unit automatically selects the last sound field program used with that source. Sound field programs cannot be selected when MULTI CH INPUT is selected. Sampling frequencies higher than 48 kHz (except for DTS 96/ 24 signals) will be sampled down to 48 kHz, then sound field programs will be applied.
Some 6.1-channel compatible discs do not have a signal (flag) which this unit can automatically detect. When playing these kinds of discs with 6.1-channel, select a decoder manually (PLIIx Music, EX/ES or EX). 6.1-channel playback is not possible even if EXTD SUR. is pressed in the following cases: When SUR. LR (see page 56) or SUR. B (see page 56) is set to NONE. When the source connected to the MULTI CH INPUT jack is being played. When the source being played does not contain surround left and right channel signals. When a Dolby Digital KARAOKE source is being played. When 2ch Stereo or Direct Stereo is selected. When the power of this unit is turned off, this setting will be reset to AUTO. The Pro Logic IIx decoder is not available when SUR. B is set to NONE (see page 56).
When you select the SUR. STANDARD program: PRO LOGIC Dolby Pro Logic processing for any sources. PLII Movie Dolby Pro Logic II processing for movie software. PLII Music Dolby Pro Logic II processing for music software. PLII Game Dolby Pro Logic II processing for game software. PLIIx Movie Dolby Pro Logic IIx processing for movie software. PLIIx Music Dolby Pro Logic IIx processing for music software. PLIIx Game Dolby Pro Logic IIx processing for game software. Neo:6 Cinema DTS processing for movie software. Neo:6 Music DTS processing for music software. When you select the SUR. ENHANCED or MOVIE THEATER program: PRO LOGIC Dolby Pro Logic processing for any sources. PLII Movie Dolby Pro Logic II processing for movie software. PLIIx Movie Dolby Pro Logic IIx processing for movie software. Neo:6 Cinema DTS processing for movie software. BASIC OPERATION
Enjoying 2-channel software in surround
Signals input from 2-channel sources can also be played back on multiple channels. Press AMP to select the AMP mode, then press STANDARD on the remote control to switch between the SUR. STANDARD and SUR. ENHANCED programs.
Or press MOVIE to select the MOVIE THEATER program.
Press SELECT on the remote control to select the decoder.
You can also select a decoder by pressing j / i on the remote control when the decoder type is displayed in the front panel display.
Note You can select from the following modes depending on the type of software you are playing and your personal preference.
The Pro Logic IIx decoder is not available when SUR. B is set to NONE (see page 56).
Listening to high fidelity stereo sound (Direct Stereo)
You can select the preset number from which this unit will store FM stations and/or begin tuning toward lower frequencies. After pressing MEMORY in step 3: 1 Press A/B/C/D/E (NEXT), then PRESET/TUNING/ CH l / h to select the preset number under which the first station will be stored. Automatic preset tuning will stop when stations have all been stored up to E8. 2 Press PRESET/TUNING (EDIT) to turn off the colon (:) and then press PRESET/TUNING/CH l to begin tuning toward the lower frequencies. Memory back-up The memory back-up circuit prevents the stored data from being lost even if this unit is set in the standby mode, the power cord is disconnected from the AC outlet, or the power supply is temporarily cut due to power failure. However, if the power is cut for more than one week, the preset stations may be cleared. If so, store the stations again by using the presetting station methods.
Press A/B/C/D/E (NEXT) repeatedly to select a preset station group (A to E) while the MEMORY indicator is flashing. The group letter appears. Check that the colon (:) appears in the front panel display.
Press PRESET/TUNING/CH l / h to select a preset station number (1 to 8) while the MEMORY indicator is flashing. Press h to select a higher preset station number. Press l to select a lower preset station number.
Selecting preset stations
You can tune any desired station simply by selecting the preset station number under which it was stored.
Press MEMORY (MANL/AUTO FM) on the front panel while the MEMORY indicator is flashing. The station band and MEMORY frequency appear in the front panel display with the preset group and number you have selected.
ENTER A-E/CAT. RETURN MEMORY
When performing this operation with the remote control, first press TUNER to set the remote to tuner mode.
Press A/B/C/D/E (NEXT) (or A-E/CAT. j / i on the remote control) to select the preset station group. The preset group letter appears in the front panel display and changes each time you press the button.
Shows the displayed station has been stored as C3.
Repeat steps 1 to 5 to store other stations.
Any stored station data existing under a preset number is cleared when you store a new station under that preset number. The reception mode (stereo or monaural) is stored along with the station frequency.
Press PRESET/TUNING/CH l / h (or PRESET/CH u / d on the remote control) to select a preset station number (1 to 8). The preset group and number appear in the front panel display along with the station band, frequency and the TUNED indicator lights up.
Selecting the XM band automatically recalls the channel previously selected. You can change the kind of XM information by pressing DISPLAY repeatedly. (For details, see Switching XM information on page 42.)
XM Satellite Radio signals cannot be output from the AUDIO OUT (REC) jacks.
Switching XM information
You can display XM information (such as channel number/name, category, or artist name/song title) for the channel currently selected in the front panel display. Press DISPLAY on the unit (or remote control during the TUNER mode) repeatedly to toggle between the following XM information display modes.
XM Satellite Radio search modes
You can search for the channel you want to listen to using one of three search modes. You can also enter the number directly to select the desired channel. (For details, see Direct Number Access mode on page 44.)
All Channel Search mode
Artist name/Song title
When the channel number/name is displayed:
 Deep Tra
When the channel category is displayed:
Carry out Selecting the XM Satellite Radio mode on page 41. Press SEARCH MODE (or SRCH MODE on the remote control) repeatedly to select ALL CH SEARCH.
When the artist name/song title is displayed:
MENU SRCH MODE
Coldplay / Clo
The front panel display can indicate up to 14 alphanumeric characters at once. If the information contains more than 14 characters, the information scrolls from right to left. If the information contains a character that cannot be recognized by the unit, the character will be displayed with an underbar _.
ALL CH SEARCH
If a status message or an error message appears in the display, see Status and error messages on page 47.
Category Search mode
To change the channel category, press CATEGORY (or A-E/CAT. j / i on the remote control) repeatedly.
To search a channel within all channels, press PRESET/TUNING/CH l / h (or PRESET/CH u / d on the remote control) repeatedly.
Carry out Selecting the XM Satellite Radio mode on page 41. Press SEARCH MODE (or SRCH MODE on the remote control) repeatedly to select CAT SEARCH. BASIC OPERATION
Remote control Front panel Remote control
You can search a channel with the quick search by pressing and holding PRESET/TUNING/CH l / h (or PRESET/CH u / d on the remote control).
To search a channel within the selected channel category, press PRESET/TUNING/CH l / h (or PRESET/CH u / d on the remote control) repeatedly.
Preset Search mode
Prior to selecting a preset channel in the Preset Search mode, you should preset XM Satellite Radio channels. For details, see Setting XM Satellite Radio preset channels on page 45. All preset channels (A1 to E8) recalls 001 Preview by the factory setting.
Direct Number Access mode
ENTER A-E/CAT. RETURN MEMORY A-E/CAT. DISPLAY
Carry out Selecting the XM Satellite Radio mode on page 41. Press SEARCH MODE (or SRCH MODE on the remote control) repeatedly to select ALL CH SEARCH or CAT SEARCH.
Carry out Selecting the XM Satellite Radio mode on page 41. Press SEARCH MODE (or SRCH MODE on the remote control) repeatedly to select PRESET SEARCH.
To change the preset group (A to E), press CATEGORY (or A-E/CAT. j / i on the remote control) repeatedly.
To change the preset number (1 to 8), press PRESET/TUNING/CH l / h (or PRESET/CH u / d on the remote control) repeatedly.
You can also select the preset number directly by pressing the numeric buttons (1 to 8) on the remote control.
Press the numeric buttons to enter the desired channel number. For example, to enter the number 123, press the numeric buttons as shown below.
STEREO MUSIC ENTERTAIN
Setting XM Satellite Radio preset channels
You can use this feature to store up to 40 XM Satellite Radio channels (eight preset numbers in five preset groups, A1 to E8). You can then recall any preset channel easily by selecting the preset group and number as described in Preset Search mode on page 44.
The display changes as follows.
If you enter fewer than three numbers, you may press ENT. to tune to the channel immediately or wait a few seconds to confirm the entered channel number.
Search the XM Satellite Radio channel you want to set as a preset channel. To search the desired channel, carry out All Channel Search mode on page 42, Category Search mode on page 43, or Direct Number Access mode on page 44.
MOVIE THEATER: Spectacle
MOVIE THEATER: Sci-Fi
MOVIE THEATER: Adventure
MOVIE THEATER: General SUR. STANDARD
For music sources
You can select from the following sound fields when playing music sources, like CD, FM/AM broadcasting, tapes, etc. Program selection methods vary depending on sound field program types. For details on how to select sound field programs, see Selecting sound field programs on pages 27 to 31.
Remote control button Program Features
2-channel (left and right) playback.
STEREO: 2ch Stereo
STEREO: 6ch Stereo MUSIC: Hall in Vienna MUSIC: The Bttm Line MUSIC: The Roxy Thtr ENTERTAINMENT: Disco SUR. STANDARD
Use to increase the output stereo sources (in stereo) from all speakers. This provides a larger sound field and is ideal for background music at parties, etc. HiFi DSP processing. A classic shoe-box type concert hall with approximately 1700 seats. Pillars and ornate carvings create extremely complex reflections which produce a very full, rich sound. HiFi DSP processing. This is the sound field at stage front in The Bottom Line, a famous New York jazz club. The floor can seat 300 people to the left and right in a sound field offering a real and vibrant sound. HiFi DSP processing. The ideal program for lively, dynamic rock music. The data for this program was recorded at LAs hottest rock club. The listeners virtual seat is at the center-left of the hall. HiFi DSP processing. This program recreates the acoustic environment of a lively disco in the heart of a big city. The sound is dense and highly concentrated. It is also characterized by high-energy, immediate sound. Standard processing for the selected decoder.
Enhanced processing for the selected decoder.
Using the sleep timer
Use this feature to automatically set this unit in the standby mode after a certain amount of time. The sleep timer is useful when you are going to sleep while this unit is playing or recording a source. The sleep timer also automatically turns off any external components connected to AC OUTLET(S).
Canceling the sleep timer
Press SLEEP repeatedly until SLEEP OFF appears in the front panel display. After a few seconds, SLEEP OFF disappears, and the SLEEP indicator goes off.
Unit UNIT Choices: meters (m), feet (ft) Initial setting: U.S.A. and Canada models: feet (ft) Other models: meters (m) Select meters to input speaker distances in meters. Select feet to input speaker distances in feet. Speaker distances Choices: 0.3 to 24.0 m (1 to 80 ft) FRONT L adjusts the distance of the front left speaker. Initial setting: 3.0 m (10.0 ft) FRONT R adjusts the distance of the front right speaker. Initial setting: 3.0 m (10.0 ft) CENTER adjusts the distance of the center speaker. Initial setting: 3.0 m (10.0 ft) SUR. L adjusts the distance of the surround left speaker. Initial setting: 3.0 m (10.0 ft) SUR. R adjusts the distance of the surround right speaker. Initial setting: 3.0 m (10.0 ft) SUR. B adjusts the distance of the surround back speaker. Initial setting: 2.10 m (7.0 ft) SWFR adjusts the distance of the subwoofer. Initial setting: 3.0 m (10.0 ft)
Center graphic equalizer D)CENTER GEQ Use this feature to adjust the built-in 5-band graphic equalizer for the center channel so that the tonal quality of the center speaker matches that of the front speakers. You can make adjustments listening to the currently selected source component or a test tone. You can adjust 5 frequency bands: 100Hz, 300Hz, 1kHz, 3kHz, 10kHz Choices: 6 to +6 dB Initial setting: 0 dB Select ON to output test tones from the front left and center speakers, and adjust the tonal quality of the center speaker. Select OFF to stop the test tone and output the currently selected source component. Low-frequency effect level E)LFE LEVEL Use to adjust the output level of the LFE (low-frequency effect) channel according to the capacity of your subwoofer or headphones. The LFE channel carries lowfrequency special effects which are only added to certain scenes. This setting is effective only when this unit decodes Dolby Digital or DTS signals. Choices: 20 to 0 dB
Speaker SP LFE Select to adjust the speaker LFE level. Headphone HP LFE Select to adjust the headphone LFE level. Note
Depending on the LFE LEVEL setting, some signals may not be output from the SUBWOOFER OUTPUT jack.
Dynamic range F)D.RANGE Use to select the amount of dynamic range compression to be applied to your speakers or headphones. This setting is effective only when the unit is decoding Dolby Digital and DTS signals. Choices: MAX (maximum), STD (standard), MIN (minimum)
If you connect headphones to the PHONES jack on the unit when SP B is set to ZONE B, the sound is output from both headphones and SPEAKERS B. If a DSP program is selected when SP B is set to ZONE B, the unit automatically enters the Virtual CINEMA DSP mode.
XM Radio setting E)XM RADIO SET
XM Radio antenna XM ANT. Use to check the current reception level for the XM Connect and Play digital antenna accessory connected to this unit. For the best reception, orient the XM Connect and Play digital antenna accessory so that a value of XX% or more is displayed here. Range: NONE, 0 to 100% Note
NONE is displayed if the XM Connect and Play digital antenna accessory is not connected to this unit. If this happens, check the antenna connections (see page 39).
ADVANCED SETUP MENU
The ADVANCED SETUP menu is displayed in the front panel display. y
During the advanced setup procedure, audio output is muted. During the advanced setup procedure, only the STANDBY/ON, STRAIGHT (EFFECT) and PROGRAM l / h buttons on the front panel are available for operation.
Press PROGRAM l / h repeatedly to move through the menu and select the item you want to set up. See the end of this section for a complete list of available parameters.
CAUTION Be sure to set the speaker impedance before using this unit to play back audio or video signals.
Press STRAIGHT (EFFECT) repeatedly to toggle between the available parameters.
Press STANDBY/ON to confirm your selection.
This completes the advanced setup procedure. The settings you made are reflected the next time this units power is turned on.
While holding down, press
ADVANCED SETUP menu items
Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening environment. Speaker impedance SP IMP. Use to switch the speaker impedance for this unit. Choices: 8 MIN, 4 MIN Select 8 MIN to set the speaker impedance to 8 . Select 4 MIN to set the speaker impedance to 4 .
SP IMP. Speaker Impedance level
If you use one set (A or B), the impedance of each speaker must be 4 or higher. If you use two sets (A and B), the impedance of each speaker must be 8 or higher. Center Surround Surround back The impedance of each speaker must be 6 or higher. If you use one set (A or B), the impedance of each speaker must be 8 or higher. If you use two sets (A and B), the impedance of each speaker must be 16 or higher.* Center Surround Surround back
<U.S.A., Canada, Australia, Korea, Asia and General models only> Remote REMOTE Use to switch the ID for the remote control of this unit. Choices: ID1, ID2 Select ID1 to operate this unit using the default code. Select ID2 to operate this unit using an alternative code. Note
You must also make settings for the remote control (see page 64).
< Asia and General models only > Tuner TU Use to switch the frequency step selection according to the frequency spacing in your area. Choices: AM10/FM100, AM9/FM50 North, Central and South America: AM10/FM100 (kHz) Other areas: AM9/FM50 (kHz)
The impedance of each speaker must be 8 or higher.
The Canada model cannot use two separate speaker systems (A and B) simultaneously when SP IMP. is set to 8 MIN.
Factory presets PRESET Use to reset all parameters to the factory presets (see page 75). Choices: CANCEL, RESET Select CANCEL if you do not want this units parameters to be initialized when you reset the factory presets. Select RESET if you want all of this units parameters to be initialized when you reset the factory presets. Note
This setting does not affect ADVANCED SETUP menu item parameters.
REMOTE CONTROL FEATURES
In addition to controlling this unit, the remote control can also operate other A/V components made by YAMAHA and other manufacturers. To control other components, you must set up remote control with the appropriate remote control codes.
Controlling this unit
The shaded areas below can be used to control this unit when the AMP mode is selected. Press AMP to activate the AMP mode.
Controlling other components
The shaded areas below can be used to control other components. Each button has a different function depending on the selected components. Select the component you want to control by pressing an input selector button.
Press AMP to control this unit.
The buttons in the dotted lines (SYSTEM POWER, STANDBY, SLEEP, MULTI CH IN, VOLUME +/, MUTE and input selector buttons) function in any mode.
/ buttons and the input selector buttons switch the function of the component control area below. * Use the / buttons to control other components regardless of whether they are connected to this unit.
AKAI AIWA DENON HITACHI JVC KENWOOD LG MAGNAVOX MITSUBISHI ONKYO PANASONIC PHILIPS PIONEER PROSCAN RCA SAMSUNG SHARP SONY TECHNICS THOMSON TOSHIBA YAMAHA ZENITH 0088, 0138 0068, 0098, 0128 0108, 0048, 0128 0008, 0028, 0098 0128
PANASONIC PHILIPS PIONEER SHARP SONY TOSHIBA YAMAHA 0238, 0248, 0278, 0288, 0298 0338, 0348 0308, 0318, 0208
0155, 0455, 0495, 0805, 1155 OPTIMUS 0225, 0245, 0555, 0595, 0845, 0855, 0865, 0895, 0935 PANASONIC 0055, 0825, 1095, 1125 PENNY 0905 PHILIPS 0165, 0215 PIONEER 0305, 0935, 1045 PROTON 0215, 1185 QUASAR 0055 RCA 0205, 0915, 1115 REALISTIC 0205, 0225, 0235, 0325, 0555, 0845 REVOX 1175 ROTEL 0215 SABA TELECOMMANDER (E) 0505 SAE 0215 SAMSUNG 1285 SANSUI 0215, 0625, 0975, 1025, 1105 SANYO 0145, 0555, 0635, 0765 SCOTT 0325, 1105 SEARS 0345 SHARP 0235, 0665, 0895, 1065, 1075 SHERWOOD 0115, 0235, 0395, 0475 SIEMENTS GARRARD 1245 SIGNATURE 0175 SONTEC 1165 SONY 0065, 0565, 0865, 1145 STARON 1235 STS 0025 SYLVANIA 0215 SYMPHONIC 0335 TANDY 0305 TANGBERG 1195 TEAC 0235, 0335, 0385, 0525, 0795, 0835, 1355 TECHNICS 0055, 0605, 1095 TECHWOOD 1325 TELEFUNKEN (E) 0505 THOMSON (E) 0505 TOSHIBA 0035, 0685 VECTOR RESEARCH 0065, 1135 VICTOR 0315 WARDS 0175 YAMAHA 0005, 0015, 0085, 0415, 0545, 0575, 1065
HITACHI JVC MARANTZ PHILIPS PIONEER YAMAHA 0484, 0454, 0464 0414
AIWA 0157 DENON 0147 DISCO VISION0017 FUNAI 0157 HITACHI (E) 0017 KENWOOD 0087, 0107 MAGNAVOX 0027
01EN_RX-V457_U.book Page i Tuesday, May 31, 2005 2:48 PM
Read Instructions All the safety and operating instructions should be read before the product is operated. Retain Instructions The safety and operating instructions should be retained for future reference. Heed Warnings All warnings on the product and in the operating instructions should be adhered to. Follow Instructions All operating and use instructions should be followed. Cleaning Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Attachments Do not use attachments not recommended by the product manufacturer as they may cause hazards. Water and Moisture Do not use this product near water for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like. Accessories Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturers instructions, and should use a mounting accessory recommended by the manufacturer. A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn.
Kenwood 650 EC102 Stylus T26 Suunto SK-7 SGH-J600E JD-V32CW 5200-903 IC-2350H 28PW8807 DCR-TRV17E RDR-HX1000 260LX RM-27LZ50 Graph 25 ZWG-3122 Sharp GX17 Daelim SJ50 DI 183 PSR740 YP-U5 Meter DVP620VR EP1052 Kodak V610 SPV C500 XR-11XC Zdts100 CD-SR11 CT-S530 II 1230 F Future DI2510F HT-C5530W Flashmate 42PFL5603H 10 TX-DS676 167MT Review ZBC741R Besea 3VT913NA TU-1500RD TK30N01FR AG-DVC15 Desktop Galaxytab CDX-GT360 42PF5320-10 GR-DVL200 Galya 2500 ZDS231 S18AHN DAV-FR10W Aspire-7720 SCC-C4301P PS105 SRU1010 AX-730 IC-T8A Media Home Photo 1400 DVD-S33 MP472 Roland TU-2 SMX-F300 Extreme 2 NN-K105wbepg Precision Samsung R428 Edition EN7300 M305CRV DVD-F1080 Taiwan Price Combisnack SGH-E390 PWD250 SBE 705 NV-DV10000B Deskjet 5650 K6200 Matrix EL-5120 TX-P50u10E Cluedo ESF6120 IC-W32A ZWI2125 Stopwatch W073 Photography KIT 630 AEG-electrolux KWA9 GR185btmr WD-73838 MX602A HT-R530 8818 PC Specs 74700 E Corsair RTF Asus A6
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101