Yamaha RX-V520 Manual
Yamaha RX-V520 Home Cinema Amplifier, size: 2.7 MB
Yamaha RX-V520rds Annexe 1
Here you can find all about Yamaha RX-V520 like manual and other informations. For example: review, remote, av receiver.
Yamaha RX-V520 manual (user guide) is ready to download for free.
On the bottom of page users can write a review. If you own a Yamaha RX-V520 please write about it to help other people. [ Report abuse or wrong photo | Share your Yamaha RX-V520 photo ]
User reviews and opinions
|sawoj||10:08pm on Friday, October 1st, 2010|
|I actually have the UL30A-X5.. Its exactly the same but all Black.. But it is the greatest laptop I have ever owned.. well worth it much worth $650 on amazon. now has windows 7 premium.|
|sentinals_arm||5:36am on Sunday, July 11th, 2010|
|Great lightweight notebook/laptop with excellent battery life. The ASUS UL30A is a very nice 13" ultraportable notebook indeed.|
|ashgromnies||1:59pm on Sunday, May 23rd, 2010|
|I have been loving my ASUS. The battery life is super long, which is great for me, and everything worked well. Sure. I would recommend this notebook to anyone and... All the specs on this notebook are impressive.|
Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.
This unit is not disconnected from the AC power source as long as it is connected to the wall outlet, even if this unit itself is turned off. This state is called the standby mode. In this state, this unit is designed to consume a very small quantity of power.
10 When disconnecting the power cord from the wall outlet, grasp the plug; do not pull the cord. 11 Do not clean this unit with chemical solvents; this might damage the finish. Use a clean, dry cloth. 12 Only voltage specified on this unit must be used. Using this unit with a higher voltage than specified is dangerous and may cause fire, damage to this unit, and/or personal injury. YAMAHA will not be held responsible for any damage resulting from use of this unit with a voltage other than specified. 13 To prevent damage by lightning, disconnect the power cord from the wall outlet during an electrical storm. 14 Take care of this unit so that no foreign objects and/ or liquid drops inside this unit.
FREQUENCY STEP switch (China and General models only) Because the interstation frequency spacing differs in different areas, set the FREQUENCY STEP switch (locating at the rear) according to the frequency spacing in your area. North, Central and South America: 100 kHz/10 kHz Other area: 50 kHz/9 kHz Before setting this switch, disconnect the AC power plug of this unit from the AC outlet. IMPORTANT Please record the serial number of this unit in the space below. MODEL: Serial No.: The serial number is located on the rear of the unit. Retain this Owners Manual in a safe place for future reference. FOR CANADIAN CUSTOMERS To prevent electric shock, match wide blade of plug to wide slot and fully insert. This Class B digital apparatus complies with Canadian ICES-003.
III CAUTION CAUTION
FEATURES... 2 GETTING STARTED... 3
Checking the Package Contents.. 3 Battery Installation in the Remote Control. 3 Battery Replacement... 3
SET MENU.. 32
Adjusting the Items on the SET MENU. 1 SPEAKER SET (speaker mode settings).. 2 HP TONE CTRL (headphone tone control). 3 I/O ASSIGN.. 4 INPUT MODE (initial input mode). 5 DOLBY D. SET (Dolby Digital set).. 6 DTS SET (DTS LFE level). 7 SP DLY TIME (center delay).. 8 DISPLAY SET.. 9 MEM. GUARD (memory guard).. 36 36
If the remote control operates only when it is close to the unit, the batteries are weak. Replace all the batteries with new ones. Be sure to replace the batteries within about two minutes. If it takes longer than two minutes, the codes preset for the remote control will return to the factory settings.
Turn the remote control over and slide the battery compartment cover in the direction of the arrow. Insert the batteries (AAA, R03 or UM-4 type) according to the polarity markings on the inside of the battery compartment. Close the battery compartment cover.
Use only AAA, R03 or UM-4 batteries for replacement. Be sure the battery polarity is correct. (See the illustration inside the battery compartment.) Remove the batteries if the remote control will not be used for an extended period of time. If the batteries have leaked, dispose of them immediately. Avoid touching the leaked material or letting it come into contact with clothing, etc. Clean the battery compartment thoroughly before installing new batteries.
0102V520/V420_01-09_EN 3 2/6/1, 2:38 PM
CONTROLS AND FUNCTIONS
D I G I T A L
D I G I TA L
SPEAKERS A B PROGRAM EFFECT PRESET/TUNING A/B/C/D/E
EDIT MEMORY TUNING MODE
MAN'L/AUTO FM AUTO/MAN'L MONO PHONES S VIDEO VIDEO L AUDIO R OPTICAL
t yu i
MAN'L/AUTO FM AUTO/MAN'L MONO PHONES VIDEO L AUDIO R
Press this switch to turn on the power of this unit or to set this unit in the standby mode. Before turning the power on, set the volume at the minimum level. Standby mode In this mode, this unit consumes a very small quantity of power to receive infrared-signals from the remote control.
2 Remote control sensor
This receives signals from the remote control.
This shows various information.
4 INPUT MODE
Press this button to select the input mode among AUTO, DTS and ANALOG for the sources that send two or more types of signals to this unit.
0102V520/V420_01-09_EN 4 2/6/1, 2:38 PM
Turn this control to turn up or down the volume.
r VIDEO AUX jacks
Connect an auxiliary audio or video input source such as a game console or camcorder to these jacks. To reproduce source signals from these jacks, select V-AUX as the input source.
o TUNING MODE (AUTO/MANL MONO)
Press this button to switch the tuning mode between automatic and manual. To use the automatic tuning method, press this button so that the AUTO indicator lights up on the display. To use the manual tuning method, press this button so that the AUTO indicator goes off.
q PROGRAM l / h
Press l or h to select a DSP program when the effect speakers (center and rear) are turned on. The name of the selected program appears on the display.
Press this button to switch the reception band between FM and AM.
Press this button to turn on or off the effect speakers (center and rear). If you turn them off, all Dolby Digital and DTS audio signals except for the LFE channel are directed to the right and left main speakers. In that case, the output levels of the right and left speakers may not match.
a INPUT l / h
Press these buttons to select the input source (DVD, AUX, MD/CD-R, TUNER, CD, V-AUX, VCR, D-TV/CBL) that you want to listen to or watch. The name of the selected input source appears on the display.
e PHONES jack
Connect the headphones to the PHONES jack so that this unit outputs audio signals for private listening. When listening with headphones privately, set both SPEAKERS A/B to the OFF position.
0102V520/V420_01-09_EN 5 2/6/1, 2:38 PM
This section describes basic operation of this unit with the remote control. First, press AMP(TUNER) on the component selector. Refer to PRESET REMOTE CONTROL for full details.
Each time you press this button, the unit switches between the power on and standby mode.
Press this button to output the test tone for each speaker.
5 A/B/C/D/E, PRESET /+
These buttons are used to select a preset station. A/B/C/D/E: To select one of a group (A to E) of preset stations PRESET /+: To select a preset station number (1 to 8)
Press this button to mute the sound. To cancel mute, press this button again.
These buttons are used to adjust the volume level. u: To turn up the volume d: To turn down the volume
Press this button to set the SLEEP timer.
These buttons adjust the settings of the SET MENU and TIME/LEVEL mode.
Press this button to select the items in the TIME/LEVEL mode.
9 r 0 t
q Input selector buttons
These buttons select the input source. CD: To play a CD TUNER: To listen to an FM or AM broadcast MD/CD-R: To play an MD or CD recorder (or tape deck) DVD: To play a DVD D-TV/CBL: To watch a TV/digital TV or cable TV VCR: To play a video cassette AUX: To use another audio component V-AUX: To use another audio/video component
This lights up when headphones are connected.
3 g and o indicators
g lights up when the built-in Dolby Digital decoder is on and the signals of the selected source are encoded with Dolby Digital. o lights up when the built-in Dolby Pro Logic decoder is on.
0 Multi-information display
This display shows various information: for example the name of the selected input source and the various settings during adjustment with the SET MENU. The current station frequency and band (FM or AM) also appear when the tuner is selected as the input source.
4 DSP program indicators
This indicates the name of the selected DSP program.
q MEMORY indicator
This flashes for about 5 seconds after pressing MEMORY. During this period, the displayed station can be stored in the memory.
5 AUTO indicator
This lights up when the unit is in the automatic tuning mode.
6 STEREO indicator
This lights up when an FM stereo broadcast with sufficient signal strength is being received.
w TUNED indicator
This lights up when this unit tunes in to a station.
e SLEEP indicator
This lights up while the built-in SLEEP timer is on.
7 x indicator
x lights up when the built-in digital sound field processor is on.
0102V520/V420_01-09_EN 8 2/6/1, 2:38 PM
DIGITAL INPUT CD
TUNER AM ANT GND FM ANT
D-TV/CBL 6CH INPUT MAIN DVD L SURROUND L CENTER DVD D-TV/CBL VIDEO SIGNAL IN VCR 1 OUT 75 UNBAL. MAIN
MONITOR OUT VIDEO IMPEDANCE SELECTOR
SET BEFORE POWER ON
MD/CD-R S VIDEO R R SUB WOOFER
REAR R (SURROUND) L
MAIN A OR B: 8 MIN. /SPEAKER A + B:16 MIN. /SPEAKER CENTER : 8 MIN. /SPEAKER REAR : 8 MIN. /SPEAKER MAIN A OR B: 4 A + B: 8 :6 :6 MIN. /SPEAKER MIN. /SPEAKER MIN. /SPEAKER MIN. /SPEAKER
AC OUTLETS SWITCHED 100W MAX. TOTAL
R IN(PLAY) OUT(REC) MD/CD-R IN DVD D-TV/CBL AUDIO SIGNAL VCR 1 OUT SUB WOOFER OUTPUT
Use speakers with the specified impedance shown on the rear panel of this unit. Do not let the bare speaker wires touch each other and do not let them touch any metal part of this unit. This could damage the unit and/or speakers.
I Speaker cables
10 mm (3/8)
Remove approx. 10 mm (3/8) of insulation from each of the speaker cables. Twist the exposed wires of the cable together to prevent short circuits.
I Connecting to the MAIN SPEAKERS terminals
Red: positive (+) Black: negative ()
Unscrew the knob. Insert one bare wire into the hole in the side of each terminal. Tighten the knob to secure the wire.
(U.S.A., Canada, Australia, China and General models only) Banana plug connections are also possible. First, tighten the knob and then insert the banana plug connector into the end of the corresponding terminal.
I Connecting to the REAR and CENTER SPEAKERS terminals
Open the tab. Insert one bare wire into the hole of each terminal. Return the tab to secure the wire.
(U.S.A., Canada, Australia, China and General models only) Banana plug connections are also possible. First, open the tab and then insert the banana plug connector into the end of the corresponding terminal.
I Main speaker terminals
One or two speaker systems can be connected to these terminals. If you use only one speaker system, connect it to either of the SPEAKERS A or B terminals.
I Rear speaker terminals
A rear speaker system can be connected to these terminals.
I Center speaker terminals
A center speaker can be connected to these terminals.
0103V520/V420_10-20_EN 16 2/6/1, 2:38 PM
Main speakers A
Main speakers B
MAIN A OR B: 8 MIN. /SPEAKER A + B:16 MIN. /SPEAKER CENTER : 8 MIN. /SPEAKER : 8 MIN. /SPEAKER REAR MAIN A OR B: 4 MIN. /SPEAKER A + B: 8 MIN. /SPEAKER : 6 MIN. /SPEAKER : 6 MIN. /SPEAKER
Right Subwoofer system Center speaker Rear speakers
I Subwoofer connection
When using a subwoofer with built-in amplifier, including the YAMAHA Active Servo Processing Subwoofer System, connect the input jack of the subwoofer system to this jack. Low bass signals distributed from the main, center and/or rear channels are directed to this jack. (The cut-off frequency of this jack is 90 Hz.) The LFE (low-frequency effect) signals generated when Dolby Digital or DTS is decoded are also directed if they are assigned to this jack.
DSP program name
If desired, adjust the delay time and the sound output level of each speaker. (Refer to DELAY TIME AND SPEAKER OUTPUT LEVELS on page 37 for details.)
Choose a DSP program based on your listening preference, and not on the name of the program. The acoustics of your listening room affect the DSP program. Minimize the sound reflections in your room to maximize the effect created by the program. When you select an input source, this unit automatically selects the last DSP program used with that source. When you set this unit in the standby mode, the current source and DSP program are memorized and are automatically selected when you turn on the power again. If a Dolby Digital or DTS signal is input when the input mode is set to AUTO, the DSP program automatically switches to the appropriate decoding program. When a monaural source is being played with PRO LOGIC/ NORMAL or PRO LOGIC/ENHANCED, no sound will be heard from the main speakers and the rear speakers. Sound can only be heard from the center speaker. However, if CENTER SP in the SET MENU is set to NON, the center channel sound is output from the main speakers. When a source connected to the 6CH INPUT jack of this unit is selected, the digital sound field processor cannot be used. RX-V520 only When 96-kHz sampling digital signals are input to this unit, the DSP program cannot be selected. In this case, the sound is reproduced as normal 2-channel stereo.
0104V520/V420_21-25_EN 24 2/6/1, 2:39 PM
I Virtual CINEMA DSP and SILENT CINEMA
Virtual CINEMA DSP Virtual CINEMA DSP allows you to enjoy the sound field effects of the DSP program without rear speakers. Using YAMAHA original technology, natural surround reproduction is possible through the generation of a virtual speaker. The sound field processing is changed to the Virtual CINEMA DSP mode by setting REAR LR SP on the SET MENU to NON. Virtual CINEMA DSP is performed by using the main speakers.
Canceling the Sound Effect (turning off the effect speakers)
Press EFFECT to cancel the sound effect and monitor only the main sound. Press EFFECT again to turn the sound effect back on.
This unit is not set in the Virtual CINEMA DSP mode even if REAR LR SP is set to NON in the following cases: when the 5CH STEREO, PRO LOGIC/NORMAL, DOLBY DIGITAL/NORMAL or DTS/NORMAL program is selected; when the sound effect is turned off; when 6CH INPUT is selected as the input source; when the Dolby Digital KARAOKE source is played; when using the test tone; when connecting the headphones (you will hear SILENT CINEMA); or RX-V520 only when 96-kHz sampling digital signals are input to this unit.
0107V520/V420_32-39_EN 33 2/6/1, 2:40 PM
I BASS OUT (bass out mode)
LFE signals carry low-frequency effects when this unit decodes a Dolby Digital or DTS signal. Low-frequency signals are defined as 90 Hz and below. Choices: SWFR (subwoofer), MAIN, BOTH Initial setting: BOTH
2 HP TONE CTRL (headphone tone control)
Use this feature to adjust the level of the bass and treble when you use your headphones. Control range (dB): 6 to +3 Initial setting: 0 dB for both BASS and TRBL (treble)
SWFR Select this if you use a subwoofer. The LFE signals are directed to the subwoofer. MAIN Select this if you do not use a subwoofer. The LFE signals are directed to the main speakers. BOTH Select this if you use a subwoofer and you want to mix the main channel low-frequency signals with the LFE signals.
3 I/O ASSIGN
It is possible to assign jacks according to the component to be used if this units DIGITAL jack settings (component names for terminals) differ from that component. This makes it possible to change the jack assignment and effectively connect more component. Once you assign, you can select that component with INPUT l / h (or the input selector buttons).
When playing a 2-channel source (CD, MD, tape, video cassette etc.), select BOTH position to direct low bass signals (below 90 Hz) to the SUBWOOFER jack. When you select SMALL (SML) for items CENTER SP, MAIN SP and REAR LR SP, the low-frequency signals (90 Hz and below) from those channels are added to the LFE and output to the subwoofer.
I 3A (1) (for the OPTICAL OUTPUT jack)
Initial setting: (1) MD/CD-R
I MAIN LVL (main level mode)
Change this setting if you cannot match the output level of the center and rear speakers with the main speakers because of the unusually high-efficiency performance of the main speakers. Choices: NORM (normal), 10 dB Initial setting: NORM
I 3B (2) to (4) (for the OPTICAL INPUT jacks)
Initial settings: (2) MD/CD-R (3) DVD (4) D-TV/CBL
NORM (normal) Normally select this setting. 10 dB Select this if you cannot match the output level of your effect speakers with that of your main speakers when using the test tone. This setting decreases the main speaker output level to about one-third of the normal level.
0107V520/V420_32-39_EN 34 2/6/1, 2:40 PM
I 3C (5) (for the COAXIAL INPUT jack)
Initial setting: (5) CD
5 DOLBY D. SET (Dolby Digital set)
This setting is effective only when this unit decodes Dolby Digital signals.
I LFE LEVEL
You cannot select an item more than once for the same type of jack.
Use this feature to adjust the output level of the LFE (lowfrequency effect) channel when playing back a Dolby Digital signal. The LFE signal carries the low-frequency special effect sound which is only added to certain scenes. Control value (dB): 20 to 0 Initial setting: 0 dB
Press or + to adjust the delay time or speaker output levels.
Repeat steps 2 and 3 to adjust the settings of any other item.
If CENTER SP or REAR LR SP is set to NON, or BASS OUT is set to MAIN, the output level of that speaker cannot be adjusted. When you adjust the output level with TIME/LEVEL, the settings you made with the test tone will be changed. To adjust speakers other than the subwoofer, the adjusting procedure using test tones on page 19 is recommended.
Press TIME/LEVEL repeatedly to select the item you want to adjust. Each time you press TIME/LEVEL, the selected item changes and appears on the display as below.
Memory back-up The memory back-up circuit prevents the stored data from being lost when this unit is set in the standby mode. If, however, the power cord is disconnected from the AC power outlet or the power is cut for more than one week, the latest values for the delay time and the center/rear/ subwoofer output levels that were set will automatically return to the preset values. If so, adjust the delay time and output levels again.
DELAY CENTER R SUR. L SUR. SWFR
Delay time Center speaker output level Right rear speaker output level Left rear speaker output level Subwoofer output level
Depending on the setting of the SET MENU, you may not be able to select all these items.
0107V520/V420_32-39_EN 38 2/6/1, 2:40 PM
The SLEEP timer can be used to automatically set this unit in the standby mode. This timer is useful when you are going to sleep while enjoying a broadcast or other desired input source. The SLEEP timer can only be set with the remote control.
Canceling the SLEEP Timer
Press SLEEP repeatedly until SLEEP OFF appears on the display. It will soon disappear and the SLEEP indicator will go off.
First press AMP(TUNER), TAPE/MD, CD or DVD/LD on the component selector to set the SLEEP timer for this unit. The SLEEP timer is effective for the components connected to the AC OUTLET(S) on the rear panel of this unit.
Setting the SLEEP Timer
Play a source you want to enjoy when you are going to sleep. Press SLEEP repeatedly to select the desired SLEEP time. Each time you press SLEEP, the SLEEP time will change as below:
Press one of the component selector buttons which corresponds to the component to be returned to the factory-set code. Press both VOLUME buttons (u/d) at the same time for about four seconds. The indicator flashes twice.
Enter the code number 9990. Make sure that the indicator flashes twice.
Enter the code number 0000. Make sure that the indicator flashes twice.
The following codes are factory set.
Component selector button TV CBL/SAT VCR DVD/LD CD TAPE/MD Component TV Cable TV VCR DVD player CD player MD recorder Code (YAMAHA DVD player) 0005 (YAMAHA CD player) 0024 (YAMAHA MD recorder) Set component Set code
We recommend that you write all the code numbers you have set on the table above.
0108V520/V420_40-46_EN 46 2/6/1, 2:40 PM
SOUND FIELD PROGRAM
A digital sound field processor (DSP) based on the latest YAMAHA technology is built into this unit. It is possible to play back various sound fields for the source you are listening to.
Regardless of the program name and characteristics listed in the table below, select the sound field program that sounds best to you.
Hi-Fi DSP Programs
I For audio sources: Nos. 1 to 4
No. 1 Program (group) CONCERT HALL Sub-program Features
A large round concert hall with a rich surround effect. Pronounced reflections from all directions emphasize the extension of sounds. The sound field has a great deal of presence, and your virtual seat is near the center, close to the stage. This is the sound field at stage front in The Bottom Line, a famous New York jazz club. The floor can seat 300 people to the left and right in a sound field offering a real and vibrant sound. The ideal program for lively, dynamic rock music. The data for this program was recorded at LAs hottest rock club. The listeners virtual seat is at the center-left of the hall.
This program recreates the acoustic environment of a lively disco in the heart of a big city. The sound is dense and highly concentrated. It is also characterized by a highenergy, immediate sound. Using this program increases the listening position range. This is a sound field suitable for background music at parties.
Reverberations (sound effects) for realizing the sound field and unprocessed stereo from the left and right main speakers is output. The sound is not output from the center speaker. (The sound is output when one of these programs is selected while playing a source encoded with a Dolby Digital or DTS signal. If 5CH STEREO is selected, the sound is output from all speakers regardless of the input source.)
CINEMA DSP Programs
DTS SPECTACLE DTS SCI-FI 70 mm SCI-FI Analog, PCM, Dolby Digital in 2-channel Dolby Digital (5.1-channel) DTS Analog, PCM, Dolby Digital in 2-channel Dolby Digital (5.1-channel)
DGTL SCI-FI DTS SCI-FI 8 MOVIE THEATER 2 ADVENTURE 70 mm ADVENTURE DGTL ADVENTURE
DTS ADVENTURE DTS GENERAL 70 mm GENERAL Analog, PCM, Dolby Digital in 2-channel DGTL GENERAL Dolby Digital (5.1-channel) DTS
PRO LOGIC/ NORMAL
Analog, PCM, Dolby Digital in 2-channel
DOLBY DIGITAL/ Dolby Digital NORMAL (5.1-channel) DTS DIGITAL SUR./NORMAL ENHANCED PRO LOGIC/ ENHANCED DTS Analog, PCM, Dolby Digital in 2-channel
DOLBY DIGITAL/ Dolby Digital ENHANCED (5.1-channel) DTS DIGITAL SUR./ ENHANCED DTS
This program ideally simulates the multi-surround speaker systems of the 35-mm film theaters. Dolby Pro Logic decoding, Dolby Digital decoding or DTS decoding and digital sound field processing create precise effects without altering the original sound orientation. The surround effects produced by this sound field wrap around the viewer naturally from the back to the left and right, and toward the screen.
The x indicator does not light up when selecting the sub-program NORMAL of the q/DTS SURROUND program. If CENTER SP in the SET MENU is set to NON, no sound is output from the center speaker. The effect sound is output from the main speakers when a monaural source is played with CINEMA DSP program groups 4 (GAME) and 5 to 8.
0109V520/V420_47-49_EN 48 2/6/1, 2:40 PM
I MOVIE THEATER 1 and 2
Most commercially available movie software has 4-channel (left, center, right and surround) sound information encoded by Dolby Surround matrix processing and stored on the left and right tracks. These signals are processed by the Dolby Pro Logic decoder. The MOVIE THEATER programs are designed to recreate the spaciousness and delicate nuances of sound that tend to be lost in the encoding and decoding processes. The 6-channel soundtracks found on 70-mm film produce precise sound field localization and rich, deep sound without using matrix processing. This units MOVIE THEATER 70 mm programs provide the same quality of sound and sound localization that 6-channel soundtracks do. When the input source is analog, PCM or encoded with Dolby Digital in 2-channel These programs express an immense sound field and a large surround effect. They also give depth to the sound from the Presence DSP sound field main speakers to recreate the realistic sound of a Dolby Stereo theater. 70 mm SPECTACLE 70 mm SCI-FI 70 mm ADVENTURE Surround DSP 70 mm GENERAL
INTRODUCTION PREPARATION BASIC OPERATION ADVANCED OPERATION
The built-in Dolby Digital or DTS decoder brings the professional-quality sound designed for movie theaters into your home. With the units MOVIE THEATER programs, you can recreate a dynamic sound that gives you the feeling of being at a public theater in your listening room by using Dolby Digital or DTS technology. When the input source is encoded with Dolby Digital (5.1-channel) or DTS (Tri-Field CINEMA DSP) These programs use YAMAHAs tri-field DSP processing on each of the Dolby Digital or DTS signals for the front, left surround and right surround channels. This processing enables this unit to reproduce the immense sound field and surround expression of a Dolby Digital- or DTS-equipped movie theater Presence DSP sound field without sacrificing the clear separation of all channels. DGTL SPECTACLE DTS SPECTACLE DGTL SCI-FI DTS SCI-FI DGTL ADVENTURE Left surround DSP Right surround DSP DTS ADVENTURE sound field sound field DGTL GENERAL DTS GENERAL
0110V520/V420_50-58_EN 50 2/6/1, 2:40 PM
No sound from the effect speakers.
The sound effect is off. A Dolby Surround, Dolby Digital or DTS decoding DSP program is being used with material not encoded with Dolby Surround, Dolby Digital or DTS. A 96-kHz sampling digital signal is being input to this unit. RX-V520 only
Press EFFECT to turn it on. Select another DSP program.
25 47, 48
22 Raise the level of the center speaker. Select the appropriate mode for your center speaker. Select another DSP program. 47, 48
No sound from the center speaker.
The output level of the center speaker is set to minimum. CENTER SP in the SET MENU is set to NON. One of the Hi-Fi DSP programs (1 to 4) has been selected. The source encoded with a Dolby Digital or DTS signal does not have a center channel signal.
No sound from the rear speakers.
The output level of the rear speakers is set to minimum. A monaural source is being played with the program 9.
Raise the output level of the rear speakers. Select another DSP program. Select SWFR or BOTH.
37 47, 48 34
No sound from the subwoofer.
BASS OUT in the SET MENU is set to MAIN when a Dolby Digital or DTS signal is being played. BASS OUT in the SET MENU is set to SWFR or MAIN when a 2-channel source is being played. The source does not contain low bass signals (90 Hz and below).
Select MAIN. 34
Poor bass reproduction.
BASS OUT in the SET MENU is set to SWFR or BOTH and your system does not include a subwoofer. The output mode for each speaker (main, center or rear) in the SET MENU does not match your speaker configuration.
Select the appropriate output mode for each speaker based on the size of the speakers in your configuration. Firmly connect the audio plugs. If the problem persists, the cables may be defective.
A humming sound can be heard.
Incorrect cable connections.
0110V520/V420_50-58_EN 51 2/6/1, 2:40 PM
The volume level cannot be increased, or the sound is distorted. The effect and surround sounds cannot be recorded. A source cannot be recorded.
The component connected to the REC OUT jacks of this unit is turned off. It is not possible to record the effect and surround sounds by a recording component. An analog source is being input during digital recording. RX-V520 only A source component and recording component are not digitally connected to the unit. RX-V520 only A digital source is being input during analog recording. A source component and recording component are not analog connected to the unit.
Tuning Range [U.S.A. and Canada models].. 87.5 to 107.9 MHz [Australia, Singapore, China and General models]... 87.50 to 108.00 MHz 50 dB Quieting Sensitivity (IHF, 100% mod.) Mono/Stereo.. 2.0 V (17.3 dBf) /25 V (39.2 dBf) Alternate Channel Selectivity (400 kHz).. 70 dB Signal to Noise Ratio (IHF) Mono/Stereo.. 76 dB/70 dB Harmonic Distortion (1 kHz) Mono/Stereo... 0.2%/0.3% Stereo Separation (1 kHz).. 48 dB Frequency Response.. 20 Hz to 15 kHz, +0.5, 2.0 dB
Tuning Range [U.S.A. and Canada models]. 530 to 1710 kHz [Australia and Singapore models].. 531 to 1611 kHz [China and General models] 10 kHz step.. 530 to 1710 kHz 9 kHz step.. 531 to 1611 kHz Usable Sensitivity... 300 V/m
Power Supply [U.S.A. and Canada models].. AC 120 V/60 Hz [Australia model]... AC 240 V/50 Hz [Singapore model]... AC 230 V/50 Hz [China model]... AC 220 V/50 Hz [General model].. AC 110/120/220/240 V, 50/60 Hz Power Consumption [U.S.A. model]... 240 W [Australia, Singapore, China and General models].... 250 W [Canada model]... 250 W/320 VA Standby Mode [U.S.A. and Canada models].. 0.90 W [Australia and Singapore models].. 0.96 W Maximum Power Consumption [General model only] 5CH, 10% THD.. 500 W AC Outlets 2 (SWITCHED) [U.S.A., Canada and Singapore models]. Total 100 W maximum [China and General models].. Total 50 W maximum 1 (SWITCHED) [Australia model].. Total 100 W maximum Dimension (W x H x D).. 435 x 151 x 390 mm Weight.... 10.0 kg Accessories.. Remote Control... Batteries.... AM loop antenna... Indoor FM antenna... Quick Reference Card... Connection Guide * Specifications are subject to change without notice.
Video Signal Type [U.S.A., Canada, China and General models]. NTSC [Australia and Singapore models].. PAL Composite Video Signal Level. 1 Vp-p/75 ohms S-Video Signal Level Y... 1 Vp-p/75 ohms C.. 0.286 Vp-p/75 ohms Signal to Noise Ratio.. 50 dB or more Frequency Response (MONITOR OUT) Composite, S-Video.. 5 Hz to 10 MHz, 3 dB
0110V520/V420_50-58_EN 54 2/6/1, 2:40 PM
Minimum RMS Output Power for Main, Center, Rear 20 Hz to 20 kHz, 0.06% THD, 8 ohms.. 65 W Maximum power 1 kHz, 0.7% THD, 8 ohms [U.S.A. and Canada models]... 80 W [Europe, U.K., Australia, Singapore, China and General models]... 75 W DIN Standard Output Power [Europe model only] 1 kHz, 0.7% THD, 4 ohms.. 95 W IEC Output Power [Europe model only] 1 kHz, 0.06% THD, 8 ohms.. 67 W Maximum Power (EIAJ) [China and General models] 1 kHz, 10% THD, 8 ohms... 95 W Dynamic Power (IHF) 8/6/4/2 ohms [U.S.A. and Canada models].. 95/115/135/155 W [China and General models].. 90/110/130/150 W Damping Factor 20 Hz to 20 kHz, 8 ohms... 60 or more Frequency Response CD, etc. to MAIN L/R.. 20 Hz to 20 kHz, 5 dB Total Harmonic Distortion CD, etc. to MAIN L/R (Effect Off, 20 Hz to 20 kHz, 30 W, 8 ohms).... 0.025% or less Signal to Noise Ratio (IHF-A Network) CD, etc. to MAIN L/R (Effect Off, 250 mV, shorted)... 100 dB or more Residual Noise (IHF-A Network) Main L/R... 150 V or less Channel Separation CD, etc. to MAIN L/R (1 kHz).. 60 dB (10 kHz).. 45 dB Tone Control (Main L/R) BASS Boost/Cut... 10 dB/50 Hz TREBLE Boost/Cut.. 10 dB/20 kHz Phones Output... 470 mV/390 ohms Input Sensitivity CD, etc.. 150 mV/47 kohms 6CH INPUT... 150 mV/47 kohms Maximum Input Signal CD, etc. (1 kHz, 0.5% THD).. 2.2 V or more Output Level REC OUT... 150 mV/1.2 kohms SUBWOOFER.. 4.0 V/1.2 kohms
AC outlets... 18 Antennas... 26
Manufacturer codes... 45, i Memory back-up... 28, 33, 38 MEM. GUARD (SET MENU).. 36 Muting... 22
BALANCE... 22 BGV function... 22
Package contents.... 3 PCM.... 57 Playing... 21 Power supply cords... 18 Preset stations Exchanging preset station.. 30 To recall a preset station.. 29 Presetting tuning Automatic preset tuning.. 28 Manual preset tuning.. 29
CBL/SAT mode.... 44 CD mode... 42 CINEMA DSP... 47, 56 Connections Antennas... 26 Audio components (MD recorder, CD recorder and CD player)... 12 External decoder... 12 Power supply cords... 18 Speakers... 16 Video components (DVD player, VCR and TV/digital TV or cable TV/satellite tuner).. 14
Rear panel... 9 Recording... 31 Remote control Basic operation... 6 Batteries... 3 Operation range.. 7 Setup codes.... 45
Delay time... 37 Display... 8 DISPLAY SET (SET MENU).. 36 DOLBY D. SET (SET MENU) D-RANGE... 35 LFE LEVEL... 35 Dolby Digital... 56 Dolby Surround (Dolby Pro Logic).. 56 DSP program CINEMA DSP program... 47 Hi-Fi DSP program... 47 DTS.... 56 DTS SET (SET MENU)... 36 Dust protection cap.. 12 DVD/LD mode... 43 DVD MENU mode.. 43
Sampling frequency (RX-V520 only).. 22, 57 SET MENU... 32 SILENT CINEMA.. 25, 56 Sleep timer... 39 SP DLY TIME (SET MENU)... 36 Speaker Output levels (TIME/LEVEL mode).. 37 Placement... 10 Output balance (test tone).. 19 SPEAKER SET (SET MENU) BASS OUT.... 34 CENTER SP... 33 MAIN LVL.... 34 MAIN SP... 33 REAR LR SP... 33 Subwoofer... 17 S VIDEO (RX-V520 only).. 57
External decoder... 12
Front panel.... 4
HP TONE CTRL (SET MENU).. 34
TAPE/MD mode... 41 Test tone... 19 Tuning Automatic tuning... 27 Manual tuning.. 27 TV mode... 44
IMPEDANCE SELECTOR switch.. 18 INPUT MODE (SET MENU).. 35 Input modes... 23 I/O ASSIGN (SET MENU)... 34, 57
LFE... 35, 36, 56
VCR mode... 44 Virtual CINEMA DSP... 25, 56
0110V520/V420_50-58_EN 58 2/6/1, 6:35 PM
LIST OF MANUFACTURERS CODES LISTES DES CODES FABRICANT
A-Mark A Tandy Abex Admira Adventura Aiko Akai Alba Alleron Ambassador Amstrad Anam 0331, 1101, 0481, 1081 0251, 1041, 1051, 1061, 1071 Anam National 1041 AOC 0361, 1021, 1031, 1111, 1161 Archer 1161 Audiosonic 1001 Audiovox 1051, 1161 Aiwa 1481 Bauer 0441 Baur 1001 Beijing 1511, 1551, 1561 Belcor 1031 Bell & Howell 0981, 0991 Beon 1001 Bradford 1051 Brockwood 1031 Broksonic 1161 Bush 1001 Candle 0351, 0361, 0961, 0971, 1111, 1131 Capehart 1021 Carver 0101 Cathay 1001 Celebrity 0951 Centurion 0411 Changhong 1541, 1551, 1561, 1621 Citizen 0351, 0361, 0921, 0931, 0941, 0961, 0971, 1111, 1121, 1131 Clairtone 1011 Clarivox 1001 Concerto 0351, 0971 Conrowa 1751 Contec 0901, 0911, 1011, 1051 Corando 0941 Craig 0251, 1051 Crown 0941, 1051 Curtis Mathes 0161, 0361, 0931, 0941, 0981, 1111 CXC 1051 Daewoo 0291, 0301, 0331, 0721, 0941, 1001, 1031, 1121, 1191, 1531, 1581, 1591, 1601 Dansai 1001 Daytron 0941, 1031 Decca 0271, 1001 Dixi 0331, 1001, 1071 Dumont 0891, 1031 Dynatech 0881 Electroband 0951, 1011 Electrohome 0941 Electron 0331 0001, 0021, 0061, 0071, 0081, 0091, 0111, 0811, 0821, 0831, 0841, 0851, 0861, 0871, 0901, 0921, 0941, 0981, 1011, 1031, 1051, 1081, 1091 Envision 0361, 1111 Erres 1001 Etron 0331 Ferguson 1001 Finlux 1001 Fisher 0171, 0801, 0981 Formenti 0441 Formonti 1001 Fortress 1141 Fujitsu 1091 Funai 1051, 1091, 1501, 1521 Futuretech 1051 GE 0131, 0161, 0201, 0751, 0761, 0771, 0781, 0791, 0811, 0861, 1041 GEC 0271, 1001 Gemini 0391 Genexxa 0431 Gibralter 0891, 1031, 1111 GoldStar 0031, 0121, 0351, 0411, 0731, 0741, 0861, 0941, 0971, 1001, 1031, 1111, 1151 Goodmans/Tashiko 0271, 0661, 1001 Granada 1001 Grundig 1781, 1791, 1801, 1811, 1821, 1831, 1841, 1851, 1861, 1871, 1881 Gunpy 1051, 1091 H/K 0721 Hallmark 0861 Hanseatic 1001 Harvard 1051, 1061 Hinari 1001, 1091 Hitachi 0181, 0351, 0671, 0681, 0691, 0701, 0711, 0871, 0941, 0971, 1351 Hypson 1001 Ima 1051 Indiana 1001 Infinity Reference 0101 Interfunk 1001 ITT 0611 Janeil 1131 JBL 0101 JCB 0951 Jensen 0311 Jinxing 1531, 1541, 1551, 1561, 1571, 1621, 1631, 1641, 1651, 1691, 1731 JVC (Victor) 0261, 0281, 0641, 0651, 0661, 0841 Kawasho 0901 Elin Elta Emerson Kaypani Kenwood Kloss KTV 1021 0361, 1031, 1111 0631, 0721, 1131 0921, 0941, 1011, 1051, 1111 Leyco 1001 Liesenk & Tter 1001 Lloytron 0941 Loewe 1001 Logik 0991, 1771 Luxman 0351, 0971 Lxi 0101, 0621, 0761, 0861, 0981 Magnavox 0101, 0341, 0391, 0401, 0411, 0421, 0581, 0591, 0601, 0611, 0631, 0661, 0961, 1111 Majestic 0991 Marantz 0101, 0221, 0361, 1001, 1111 Mark 1001 Matsui 0271, 0331, 1001 Mediator 1001 Megatron 0691, 0861, 1161 MEI 1011 M Electronic 1001 Memorex 0331, 0571, 0861, 0971, 0981, 0991, 1771 Metz 1791, 1831, 1891, 1901, 1911, 1921, 1931, 1941 MGA 0361, 0561, 0571, 0861, 1031, 1111 Midland 0751, 0761, 0891, 0941, 1151 Mitsubishi 0221, 0321, 0561, 0571, 0661, 0861, 1031, 1101, 1381 Montgomery 1091 Motorola 1041, 1141 MTC 0351, 0361, 0881, 0931, 0971, 1011, 1031, 1111 Multitech 0881, 1051 NAD 0551, 0621, 0861 NEC 0241, 0351, 0361, 0661, 0971, 1031, 1111, 1321, 1711 Neckermann 1001 Nei 1001 Nikkai 0271, 0431, 1001, 1151 Nikko 0861, 1111, 1121 Novabeam 0721 NTC 1121 Onwa 1051 Optimus 0551 Optonica 0541, 1(1 Orion 0831, 1001 Osaki 0271, 1151 Otto Versand 1001 Panasonic 0101, 0191, 0251, 0751, 1041, 1311, 1371, 1431 Panda 1541, 1721 Penny 0161, 0361, 0521, 0531, 0621, 0731, 0751, 0761, 0781, 0791, 0861, 0931, 0941, 1031, 1041, 1111, 1151, 1161 1561, 1621 0361, 0581, 0591, 0601, 0611, 0631, 0961, 1031, 1111 0101, 0401, 0941, 1031, 1111 0511, 0551, 0871 0941, 1031, 1001 0501, 0861, 0941, 1021, 1031 0251, 0751, 0541, 0941, 1031, 1051, 0051, 0141, 0151, 0181, 0411, 0491, 0531, 0761, 0771, 0871, 1031 0541, 0861, 0941, 0971, 0981, 1031, 1051, 1111, 1001 0891, 1111 0331, 1081 0361, 0941, 1021, 1111, 1151 0331, 0341, 0351, 0361, 0861, 0931, 0941, 0971, 1001, 1031, 1111, 0171, 0231, 0271, 0661, 0801, 0911, 0981, 1231, 1251, 0861 0831, 0861, 0941, 1031, 1051, 1091 0101, 0161, 0171, 0351, 0481, 0521, 0621, 0761, 0801, 0861, 0971, 0981, 1091 1561, 1681 0461, 0471, 0541, 0661, 0911, 0941, 0991, 1771
New Product Information
Digital Home Theater Receiver
Tri-Field CINEMA DSP, DTS Digital Surround, Dolby Digital, Equal Power for All Five Channels, Versatile Connections including Front Panel Optical Digital Out. At a High-Demand Price Point, This is a Focal Product in the Yamaha Home Theater Line.
Black finish available in some areas.
Tri-Field CINEMA DSP, DTS Digital Surround, Dolby Digital, Equal Power for All Five Channels, and Preset Remote Unit. Powerful and Versatile Control Center for Yamaha Home Theater in a Box.
26 Surround Programs:18 CINEMA DSP, DTS Digital Surround, Dolby Digital, Dolby Pro-Logic and 5 HiFi DSP Programs Equal Output Power for Five Channels High Dynamic Power, Low-Impedance Drive Capability Linear Damping 96-kHz/24-Bit Digital-to-Analog Converters for All Channels Versatile, Extensive Connections 4 Optical and 1 Coaxial Digital Input Terminals (fixed and assignable, except Video Aux) 1 Optical Digital Output Terminal (fixed and assignable) 4 A/V (with S-video) and 3 Audio inputs Front Panel Video Aux Input Terminals with Optical Digital and S-Video Terminals Wide-Range Frequency Response for DVD-Audio Compatibility 6-Channel External Decoder Input Terminals for Other Future Formats Subwoofer Output with Low-Pass Filter Convenient Operating Features Auto Priority Input Selection and Auto Decoder Selection Convenient Set Menu: Speaker Set Functions, Headphone Tone Control, I/O Assignment, Input Mode, Dolby Digital Set, DTS Set, Speaker Delay Time, Display Set and Memory Guard Digital Delay Time Control 2-Way Binding-Post Speaker Terminals Speaker A/B Selector Sleep Timer Preset Remote Control Unit High Reception Tuner 40-Station AM/FM Random Access Preset Tuning Auto Preset Tuning (FM Station Memory and Editing)
DTS Input < < < < <
New 32-Bit Original LSI (YSS-928) for High Precision Decoding and CINEMA DSP Processing 26 Surround Programs with 18 CINEMA DSP and 5 HiFi DSP Programs SILENT CINEMA for Headphone Enjoyment Virtual CINEMA DSP for Versatile Surround Enjoyment 96kHz/24-Bit D/A Conversion 6-Channel External Decoder Input Terminals DVD-Audio Ready Versatile Digital Input/Output Capability Preset Remote Control Unit
Advanced Yamaha Digital Technology including CINEMA DSP Compatible with All Movie Audio Formats Yamaha Original 32-Bit LSI (YSS-928) Incorporates Dolby Digital, DTS and Dolby Pro-Logic Decoders Plus DSP Processing Circuits
RX-V520/RX-V420 Surround HiFi DSP Programs CONCERT HALL JAZZ CLUB ROCK CONCERT ENTERTAINMENT Programs Surround Programs Programs CINEMA DSP Programs ENTERTAINMENT MONO MOVIE TV SPORTS MOVIE THEATER 1 MOVIE THEATER 2 DOLBY/DTS SURROUND Programs Program Total Programs Analog Input Concert Hall Jazz Club Rock Concert Disco 5 Ch Stereo 5 Programs Analog Input Dolby Pro-Logic Normal 1 Program Dolby Digital Input < < < < <
Dolby Digital Input Dolby Digital Normal 1 Program
DTS Input DTS Digital Sur. Normal 1 Program DTS Input < < < DTS Digital DTS Digital DTS Digital DTS Digital DTS Digital 5 Programs 6 Programs
Analog Input Dolby Digital Input Game < Mono Movie < TV Sports < 70mm Spectacle Dolby Digital Spectacle 70mm Sci-Fi Dolby Digital Sci-Fi 70mm Adventure Dolby Digital Adventure 70mm General Dolby Digital General Dolby Pro-Logic Enhanced Dolby Digital Enhanced 8 Programs 5 Programs 14 Programs 6 Programs Program Grand Total: 26 Programs : HiFi DSP Programs : CINEMA DSP : A/V Programs : Tri-Field CINEMA DSP
Sur. Sur. Sur. Sur. Sur.
Spectacle Sci-Fi Adventure General Enhanced
Optimum Space Utilization The use of highly integrated LSIs allows an interior design that maximizes power and sound quality by postioning all the digital processors and related circuitry in one small area. This leaves most of the space open for the power amplifier components: transformers, capacitors, heat sink and so on. This means that these parts can be much larger than usual for greater power, that they can be separated for minimum chance of interference, and that circuits can be arranged in straight lines for maximum signal purity.
RX-V520/RX-V420 New Product Information
Processing Circuits 26 Surround Programs:18 CINEMA DSP, DTS Digital Surround, Dolby Digital, Dolby Pro-Logic and 5 HiFi DSP Programs Equal Output Power for Five Channels High Dynamic Power, Low-Impedance Drive Capability Linear Damping Versatile, Extensive Connections 2 Optical and 1 Coaxial Digital Input Terminals (fixed and assignable) 4 A/V (with S-video) and 3 Audio inputs Front Panel Video Aux Input Terminal Wide-Range Frequency Response for DVD-Audio Compatibility 6-Channel External Decoder Input Terminals for Other Future Formats Subwoofer Output with Low-Pass Filter Convenient Operating Features Auto Priority Input Selection and Auto Decoder Selection Convenient Set Menu: Speaker Set Functions, Headphone Tone Control, I/O Assignment, Input Mode, Dolby Digital Set, DTS Set, Speaker Delay Time, Display Set and Memory Guard Digital Delay Time Control 2-Way Binding-Post Speaker Terminals Speaker A/B Selector Sleep Timer Preset Remote Control Unit High Reception Tuner 40-Station AM/FM Random Access Preset Tuning Auto Preset Tuning (FM Station Memory and Editing)
New 32-Bit Original LSI (YSS-928) for High Precision Decoding and CINEMA DSP Processing 26 Surround Programs with 18 CINEMA DSP and 5 HiFi DSP Programs SILENT CINEMA for Headphone Enjoyment Virtual CINEMA DSP for Versatile Surround Enjoyment 6-Channel External Decoder Input for Other Future Formats DVD-Audio Ready
Preset Remote Control Unit
Advanced Yamaha Digital Technology including CINEMA DSP Compatible with All Movie Audio Formats Yamaha Original 32-Bit LSI (YSS-928) Incorporates Dolby Digital, DTS and Dolby Pro-Logic Decoders Plus DSP
RX-V520 vs. RX-V496 & RX-V420 vs. RX-V395 Surround Decoding and DSP Processing Surround Program DTS Digital Surround Dolby Digital SILENT CINEMA for Headphone Enjoyment 96kHz/24-Bit D/A Converters Virtual CINEMA DSP Max Power Main Ch Center Ch Rear Effect Ch Min. RMS Output Power Main Ch (8 ohms, 2020,000 Hz) Center Ch Rear Effect Ch Digital Input Terminals Digital Output Terminal A/V Input/Output Terminals Front Panel Input Terminals High Dynamic Power, Low-Impedance Drive Capability Dynamic Power/Ch (8/6/4/2 ohms) Linear Damping Damping Factor (8 ohms, 2020,000 Hz) Frequency Response (CD) Signal-to-Noise Ratio (CD) Dimensions (W x H x D) Weight
RX-V520 Yamaha 32-Bit YSS-928 LSI 26 programs Yes Yes Yes Yes Yes 100 W + 100 W 100 W 100 W + 100 W 70 W + 70 W (0.06% THD) 70 W (0.06% THD) 70 W + 70 W (0.06% THD) 4 optical and 1 coaxial (fixed and assignable) 1 optical (fixed and assignable) 4 input/2 output (with S-video)/ 1 monitor out (with S-video) Yes (with optical digital and S-video) Yes 95/115/135/155 W Yes 60 (main ch, speaker A) 10100,000 Hz +0, -3 dB 100 dB (250 mV) 435 x 151 x 390 mm; 10 kg
RX-V496 Yamaha 24-Bit YSS-918 LSI 23 programs Yes Yes 100 W + 100 W 100 W 100 W + 100 W 70 W + 70 W (0.06% THD) 70 W (0.06% THD) 70 W + 70 W (0.06% THD) 2 optical and 1 coaxial (fixed) 4 input (with 2 S-video)/1 output (with S-video)/1 monitor out (with S-video) Yes (with S-video) Yes 90/110/130/150 W Yes 60 (main ch, speaker A) 2020,000 Hz 0.5 dB 100 dB (250 mV) 435 x 151 x 391 mm; 10 kg.
RX-V420 Yamaha 32-Bit YSS-928 LSI 26 programs Yes Yes Yes Yes 95 W + 95 W 95 W 95 W + 95 W 65 W + 65 W (0.06% THD) 65 W (0.06% THD) 65 W + 65 W (0.06% THD) 2 optical and 1 coaxial (fixed and assignable) 4 input/1 output/ 1 monitor out Yes Yes 90/110/130/150 W Yes 60 (main ch, speaker A) 10100,000 Hz +0, -3 dB 100 dB (250 mV) 435 x 151 x 390 mm; 9.5 kg
RX-V396 Yamaha 24-Bit YSS-918 LSI 17 programs Yes 95 W + 95 W 95 W 95 W + 95 W 60 W + 60 W (0.06% THD) 60 W (0.06% THD) 60 W + 60 W (0.06% THD) 2 optical and 1 coaxial (fixed) 3 input/1 output/ 1 monitor out Yes 85/105/125/145 W Yes 60 (main ch, speaker A) 2020,000 Hz 0.5 dB 100 dB (250 mV) 435 x 151 x 391 mm; 10 kg
RX-V520/RX-V420 Digital Home Theater Receivers
RX-V520 Rear Panel Connections
6-Channel External Decoder Input for Future Sound Formats Versatile Digital Inputs/Outputs: 4 Optical/1 Coaxial Digital Inputs and 1 Optical Output (fixed and assignable) 40-Station AM/FM Random Access Preset Tuning 4 A/V (with S-Video) and 3 Audio Inputs, and 1 A/V and 1 Audio Outputs
All speaker terminals are banana-plug compatible. Main Speaker terminals are large bindingpost type.
Subwoofer Output Terminal
RX-V420 Rear Panel Connections
6-Channel External Decoder Input for Future Sound Formats 2 Optical/1 Coaxial Digital Inputs (fixed and assignable) 40-Station AM/FM Random Access Preset Tuning 4 A/V and 3 Audio Inputs, and 1 A/V and 1 Audio Outputs
RX-V520 Inputs and Outputs Analog
In Out CD MD/CDR DVD D-TV/CBL VCR Video Aux TV Monitor Aux Fixed () and Assignable () Terminals
Digital Coaxial Optical In Out In Out
Video Composite S Video In Out In Out
RX-V420 Inputs and Outputs Analog
Digital Coaxial Optical In Out In Out
Video Composite In Out
Visit us at our website: http://www.yamaha.co.jp/
YAMAHA CORPORATION P.O. Box1, Hamamatsu, Japan
I845GE PPC-4100 Black UK Basic RX-ES1SL C250P EX-S770D L1512S Deluxe 4 4I Remote RC897T Review F-1 8G Tridata Server KDC-4080RV M7310 TH7II-raid WG5005 LX-90 020-T 3346Z Wireless Travelmate 3200 SE-U55 KDL-55EX710 Pqf20 Axim X51V Powermate 1000 EWS1045 Polaroid V35 1 5 NV-GS75EB 96910 RM318PU NP-N220-ja01 Caplio RR30 S-AMP Optio E75 VP-DC563 PX-777 Magicolor 5450 PC300 NP-N135 F45FD SM1120 VP-D362 AS4040-55E TCD-100 Force 72850 CZ21D83N ESL499 Astro 1999 25PT4423 MX-J200 SPP-A400 MZ-42PM10 Nikon 600 Plus 710 From 2005 BMW 540I Harmony 550 Caddx NX-4 NS-P400 LG MG23 Dvdr880 021 930CM A8R-mvpi Jetta TI 6523 PN42C450b1D R-2V18 DMC-FP2 Minolta 7145 EW500F AV-28WFT1 MX3ST D125XI Sounder DVD-RV40 LE32A676a1M KDL-40D3500 PO 2790 32PW8620 12 Av Receiver EX-S3 SG-9500 Teamset VR-5505 HDB65 MRF-200 VP-MX10A RM4230 Telecom 110 8709 1200 R HH120 Stratos SP1613N CR-D90 - C350
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101