Level Sensors Amplifier, Capacitive Types SV 150/250, SV 160/260
Level control for solid, fluid, or granulated substances SV 150/250: Max./min. control of DISCHARGING SV 160/260: Max./min. control of CHARGING Factory-set sensitivity For capacitive sensors VR. and VRY. 10 A SPDT or 8 A DPDT output relay LED-indication: SV 150/250: Power supply and relay ON SV 160/260: Relay ON AC or DC power supply

SV 150/250

SV 160/260

Product Description

Level control relays for capacitive sensors, types VR and VRY. The relays can control one or two levels of charging (SV 160/260) or discharging (SV 150/250).

Ordering Key

Housing Output Power supply

SV 150 024

Type Selection
Plug Circular Output SPDT DPDT SPDT DPDT Function Discharging Discharging Charging Charging Supply: 24 VAC SV SV SV SV Supply: 115 VAC SV SV SV SV Supply: 230 VAC SV SV SV SV Supply: 24 VDC SV SV SV SV 724 724

Input Specifications

Sensitivity Sensor voltage Sensor current Activated Not activated Sensor short-circuit current Depends on sensor type and material Max. 24 VDC Terminal 6 is negative Min. 15 mA, max. 20 mA Max. < 5 mA Max. 45 mA

Supply Specifications

Power supply AC-types Rated operational voltage through pin 2 & Rated insulation voltage Rated impulse withstand voltage Overvoltage cat. II (IEC 60664) 230 VAC 15% 115 VAC 15% 24 VAC 15% 2.0 kVAC (rms)

General Specifications

Indication for Output ON Power supply Environment Degree of protection Pollution degree Operating temperature Storage temperature Approvals CE-marking LED, red LED, green (only SV 150/250) IP 20 B 3 (IEC 60664) -20 to +50C (-4 to +122F) -50 to +85C (-58 to +185F) UL, CSA Yes
4 kV (1.2/50 s) (line/neutral) Power supply DC-types Installation cat. II (IEC 60664) Rated operational voltage VDC 15% (pin 2 pos.) Rated insulation voltage None Rated transient protection volt. 800 V (1.2/50 s)
Specifications are subject to change without notice (11.06.03)

SV 150/250, SV 160/260

Output Specifications
SV150/SV160 Output Rated insulation voltage Contact ratings (Ag-CdO) Resistive loads Small inductive loads Mechanical life Electrical life Operation frequency Insulation voltages Rated insulation voltage Rated impulse withstand voltage SPDT relay 250 VAC (rms) (cont./elec.) (micro gap) 10 A/250 VAC (2500 VAC) 1 A/250 VAC (250 W) 10 A/25 VDC (250 W) 2.5 A/230 VAC 5 A/24 VDC 5 x 107 operations 105 operations 7200 operations/h 2.0 kVAC (rms) (cont./elect.) None 4 kV (1.2/50 s) (cont./elect.) (IEC 60664) 800 V SV250/SV260 DPDT relay 250 VAC (rms) (Cont./elec., cont./cont.) (micro gap) 8 A/250 VAC (200 VA) 0,4 A/250 VDC (100 W) 4 A/25 VDC (100 W) 2.5 A/230 VAC 5 A/24 VDC 5 x 107 operations 105 operations 7200 operations/h 2.0 kVAC (rms) (cont./elect.) None 4 kV (1.2/50 s) (cont./elect.) (IEC 60664) 800 V

AC 1 DC 1 or AC 15 DC 13

AC DC AC DC

Mode of Operation

Max. and/or min. control of solid, fluid or granulated substances, e.g. sand, gravel, sugar or chemicals. SV 150/250: Relay control of DISCHARGING SV 160/260: Relay control of CHARGING Example 1 The diagram shows the level control connected as max. and min. control, i.e. registration of 2 levels during charging (discharging). The relay releases (operates) when the max. sensor is in contact with the substance, provided that the min. sensor is immersed. The relay operates (releases) when the min. sensor is no longer in contact with the substance. Example 1 The diagram shows the level control connected as max. or min. control, i.e. registration of 1 level during charging (discharging). The relay releases (operates) when the sensor is in contact with the substance.

Wiring Diagrams

Example 1: Two levels max./min. Example 2: One level

Power supply

Min. or max. Power supply

Operation Diagrams

SV 150/250 DISCHARGING Example 1 Power supply Max. Min. Relay on Example 2 Power supply Max./Min. Relay on SV 160/260 CHARGING Example 1 Power supply Max. Min. Relay on Example 2 Power supply Max./Min. Relay on

Accessories

Sensors: Types VR and VRY Bases Hold down spring Base covers Front mounting bezel

SV-150 SV-175 SV-200 SV-250 Ice/Beverage Dispenser

SV-250

SV-200

SV-175

SV-150
Servend's new SV Series features a no hassle one-piece structural base, recessed coldplate inlets for more line space behind the splash panel, and a modular design; all resulting in a more durable machine dispensing consistent, quality drinks.
One-piece ABS base provides a solid foundation as well as adding structural rigidity to the dispenser. Enhanced agitation and drive system provides consistent ice dispense and ease of serviceability. Patented Rocking Chute simplifies ice dispensing and storage. Multi-port flex manifold adds carb/noncarb flexibility. Fast flavor change-overs reduce service complexity.
ISO 9001:2000 Quality System Certified
Leader in Ice & Beverage Dispensers
Countertop Ice/Bev Drop-in Countertop Electric Undercounter Beverage Towers Ice Chests

Specifications

Standard Features Approximate Shipping Weights Approximate Countertop Weight (w/o ice) Ice Storage Capacity Electrical Requirements Drain Number of Valves Ice Machine Compatibility Manifold Options
Lighted merchandiser, Quench graphics, key switch, leg kit, and drain kit. 250 lbs. / 113 kgs. 198 lbs. / 90 kgs. Up to 150 lbs. / 68 kgs. 277 lbs. / 126 kgs. 223 lbs. / 101 kgs. Up to 175 lbs. / 80 kgs. 304 lbs. / 138 kgs. 235 lbs. / 107 kgs. Up to 200 lbs. / 91 kgs. 335 lbs. / 152 kgs. 260 lbs. / 118 kgs. Up to 250 lbs. / 114 kgs.
Dispenser: 120V/60Hz/2.8FLA. 220V/50Hz/1 also available. Single 0.75" (1.91 cm) PVC (N.P.T.) drain fitting extends from drain pan. Units can be drained from the bottom or back of unit. 8 or 10
Manual fill or top-mount with compatible ice machines. Contact MBE for adapter kit requirements for top-mounted ice machine applications. 6 valve 2-1-1-valve 3-1-1-1-valve 3-1-1-1-2 / 10 valve 3-1-2-1-3
Flomatic 464 beverage valves. Both 424 and 464 available in sanitary lever, push button, portion control, and autofill valve. Other valves available. Contact MBE for details. Other options: regulators, installation kits, and side splash panels.

Height

SV-150 SV-175 SV-200 SV-250
23.00" 31.13" 34.88" 58.42 cm 79.07 cm 88.60 cm 25.00" 31.13" 34.88" 63.50 cm 79.07 cm 88.60 cm 30.00" 31.13" 34.88" 76.20 cm 79.07 cm 88.60 cm 30.00" 31.13" 40.88" 76.20 cm 79.07 cm 103.80 cm
*Height dimension without full lid. Add 0.50" (1.27 cm) for full lid.
MANITOWOC BEVERAGE EQUIPMENT, INC. 2100 Future Drive Sellersburg, IN 47172, USA Ph: 812-246-7000 Fax: 812-246-7024 Visit us online at www.manitowocbeverage.com
2007 Servend 9/07 Continuing product improvement may necessitate change of specifications without notice.