XP Series

Power Amplifiers
XP7000 XP5000 XP3500 XP2500 XP1000

XP7000 Rear Panel

Five superb amplifiers optimized for installation use.
Advanced circuit design and anti-vibration measures inherited from the PC-1N series deliver tight, solid lows,
extraordinary midrange presence, and precisely defined highs.
Exclusive Yamaha EEEngine technology achieves unmatched efficiency. +4dBu/26dB/32dB gain switch for flexible level matching. Lightweight, compact 2U design for easy handling and installation. Monitor and Remote terminals for remote monitoring and control. Precision 1-dB/step detented attenuators. XLR and Euroblock input terminals. Speakon and 5-way binding post output terminals. Frequency-switchable high-pass filter for subsonic noise reduction or subwoofer matching. Comprehensive protection circuits, indicators and variable-speed cooling. Ideal matches for the DME64N/24N Digital Mixing Engines and Installation Series speakers. XP7000 can be used to drive 70V lines (stereo), while XP3500 is compatible with 100V lines (bridged) for
high-impedance multi-speaker systems.

GENERAL SPECIFICATIONS

Model Output Power 1kHz, THD+N = 1% 8 bridge 1kHz, 20ms burst 20Hz ~ 20kHz, THD+N = 0.1% bridge 8 bridge Constant Voltage 100V Line Line 70V Line Voltage Gain Input Sensitivity RL=8 +4dBu position RL=8 +4dBu position 26dB position 32dB position SN Ratio Power Consumption 20Hz~20kHz, DIN AUDIO 1/8 power (4 pink noise) Idle Standby THD+N Frequency Response Crosstalk Damping Factor Maximum Input Level Input Impedance Controls Connectors Front panel Rear panel Input Output Monitor/Remote Indicators Load Protection Amplifier Protection Power Supply Protection Cooling Fan Power Requirements Dimensions (W x H x D) Weight Included Accessories * Half power = 1/2 power output level 20Hz~20kHz, 1/2 power, RL=4 RL=8, Po=1W, 20Hz - 20kHz 1kHz, half power, 8 Att. max, input 600 shunt RL=8, 1kHz +13.7dBu +7.7dBu 104dB 650W 35W 5W Less than 0.1% +0dB, -1.0dB Less than -70dB More than 350 +22dBu 20k (balanced), 10k (unbalanced) POWER switch x 1 (push on/push off), Attenuator x 2 (31position) MODE switch x 1 (STEREO/BRIDGE/PARALLEL), HPF switch x 2 (20Hz/55Hz/OFF) (12dB/oct), GAIN switch x 1 (+4dBu/26dB/32dB) XLR-3-31 type x 2, Euroblock connector x 2 pairs (balanced) Neutrik SPEAKON NL4 x 2, 5-way binding post x 2 pairs D-SUB 15P x 1 POWER/STANDBY x 1 (Green/Orange), PROTECTION x 1 (Red), TEMP x 1 (Red) heatsink temp 85C, SIGNAL x 2 (Green), CLIP/LIMIT x 2 (Red) POWER switch on/off mute, DC-fault: Amplifier shuts down automatically (XP7000, XP5000 Operation not restored automatically) Output Relay Off (XP3500, XP2500, XP1000 returns automatically), Clip limiting: THD 0.5% Thermal: Output Mute (heatsink temp 90C) (Operation not restored automatically), VI limiter (RL 1): Limit the output Thermal: Amplifier shuts down automatically (XP7000, XP5000, Operation not restored automatically, heatsink temp 100C) Amplifier shuts down automatically (XP3500, XP2500, XP1000, Restored automatically, heatsink temp 130C) Variable-speed fan x 2 120V, 220V-240V; 50Hz/60Hz 480 x 88 x 456mm (18-7/8" x 3-7/16" x 17-15/16") XP7000, XP5000, XP2500: 14kg (30.9lbs), XP3500: 15kg (33.1lbs), XP1000: 12kg (26.5lbs) Security cover x 1, Euroblock connector x 2 (3P), Owner's manual Variable-speed fan x 1 Variable-speed fan x 2 Variable-speed fan x 1 More than 200 More than 350 More than 200 +12.2dBu +6.2dBu 103dB 500W 35W 5W 35.7dBu 34.2dBu XP7000 1100W x 2 750W x 2 2200W 1600W x 2 3200W 950W x 2 700W x 2 1900W 625W x 2/8 XP5000 750W x 2 525W x 2 1500W 1300W x 2 2600W 700W x 2 500W x 2 1400W XP3500 120V / 240V 590W x 2 390W x 2 1180W 1000W x 2 2000W 450W x 2 350W x 2 900W 625W/16 (Bridge) 26dB/32dB 32.7dBu +4dBu +10.7dBu +4.7dBu 102dB 450W 30W 5W +9.2dBu +3.2dBu 100dB 320W 25W 5W +5.2dBu -0.8dBu 96dB 170W 20W 5W +13.6dBu +7.6dBu 104dB 650W 35W 5W +12.2dBu +6.2dBu 103dB 500W 35W 5W 31.2dBu 27.2dBu 35.6dBu 34.2dBu 390W x 2 275W x 2 780W 650W x 2 1300W 300W x 2 250W x 2 600W 165W x 2 (120V) 155W x 2 (240V) 135W x 2 (120V) 120W x 2 (240V) 330W (120V) 310W (240V) 250W x 2 500W 125W x 2 (120V) 110W x 2 (240V) 110W x 2 (120V) 100W x 2 (240V) 250W (120V) 220W (240V) 1100W x 2 750W x 2 2200W 1600W x 2 3200W 950W x 2 690W x 2 1900W 625W x 2/8 750W x 2 525W x 2 1500W 1300W x 2 2600W 700W x 2 500W x 2 1400W XP2500 XP1000 XP7000 XP5000 XP3500 230V 590W x 2 390W x 2 1180W 925W x 2 1850W 435W x 2 350W x 2 870W 625W/16 (Bridge) 26dB/32dB 32.7dBu +4dBu +10.7dBu +4.7dBu 102dB 450W 30W 5W +9.2dBu +3.2dBu 100dB 320W 25W 5W +5.2dBu -0.8dBu 96dB 170W 20W 5W 31.2dBu 27.2dBu 390W x 2 275W x 2 780W 650W x 2 1300W 295W x 2 250W x 2 590W 155W x 2 125W x 2 310W 250W x 2 500W 115W x 2 100W x 2 230W XP2500 XP1000

Yamaha Releases a 5-model Amplifier Series Optimal for Installation Use
XP is the Yamahas new 5-model power amplifier series for installation that achieves high sound quality and high cost performance. The power amplifier featuring high power, high quality, high reliability and high stability matches various installation sound systems and provides superior acoustic features even in live performance applications.

POWER AMPLIFIER

*except XP3500, XP2500, XP1000
XP7000 XP5000 XP3500 XP2500 XP1000
700W+700W (8, 20Hz-20kHz), compatible with 70V lines (STEREO) 500W+500W (8, 20Hz-20kHz) 350W+350W (8, 20Hz-20kHz), compatible with 100V lines (BRIDGE) 250W+250W (8, 20Hz-20kHz) 110W+110W (8, 20Hz-20kHz)
These figures are based on US120V specifications. See the specifications for details.

XP7000 Front Panel

XP7000 Rear Panel
XP Series Key Features 5-model lineup ranging from700W* output to 100W* output *(STEREO 8 ohms). High sound quality equivalent to upper-class models with parts and emphasizing on superior sound. While realizing a design that ensures high sound quality, efficiency has been planned down to the finest details for full achievement of both high-definition sound and superior value. Yamaha's exclusive state-of-the-art high-efficiency amplifier driving technology EEEngine installed. A gain switch that can be changed to +4dBu / 26dB / 32dB has been installed on the rear panel for compatibility with a wide variety of input levels.
Light weight and compact design of 2U size for installation in any location Monitor and remote terminals for monitoring and control from a remote location High-accuracy 1dB-step detented attenuator Various terminals and features suitable for professional use Special high-pass filter that enables change of cut-off frequency Equipped with various protection circuits, indicators and stepless low-noise fans Best matches with the digital mixing engine DME64N/24N and Installation series speakers
Lineup of 5 models ranging from 700W* to 100W* for use in any application *STEREO 8 ohms
The newly developed XP series consists of 5 models with different outputs ranging from 700W (STEREO 8) to 100W (STEREO 8). Ideal amplifier can be selected according to the scale and application by combining the model with finely set output. The series is designed for flexibility and versatility. It offers 3 modes: STEREO mode for driving 2-channel sources independently, PARALLEL mode for driving monaural sources using 2 channels and BRIDGE mode for high-powered driving of 2 internal amplifiers as a single monaural amplifier. The series also uses lead-free parts and is environmentally friendly. series also realizes clear and high sound quality equivalent to class AB and lower power consumption equivalent to class D. Low power consumption also contributes to reduction of generated heat as well as a more compact chassis, lighter weight and improved reliability. EEEngine cuts power consumption by a full 50% in comparison with conventional power amplifiers, yet without the slightest sacrifice in sound quality.

EEEngine

Excellent sound quality realized by careful selection of parts, design emphasizing on sound quality and vibration tolerance
Superior sound quality equivalent to upper-class models has been realized by circuit design and careful selection of parts focusing on sound quality, and the inheritance of vibration tolerance developed for PC-1N. The series features tight low tones, full and rich high tones and abundant, stable mid-tones. Especially, the series features high resolution for spoken words and vocals.
Light weight and compact design of 2U size for installation in any location
Including EEEngine, various state-of-the-art features and know-how were adopted to realize large output and high sound quality. At the same time, Yamaha succeeded in a remarkably compact and light-weight design. All 5 models are the same 2U size. XP7000 and XP5000 utilize switching power supply for high output despite the compact size. The light-weight design also brings advantage for live performance use.
Provides excellent value while prioritizing sound quality
With top priority placed on sound quality for all audio-related parts, efficiency was emphasized from the development stage to deliver maximum value. This helps the series provide great sound performance that is one level above similarly priced models.
Various terminals and features suitable for installation
The series is equipped with various input and output terminals suitable for professional sound control including XLR and Euro-block input terminals and Speakon and 5-way binding post output terminals. XP7000 is compatible with 70V lines (STEREO) and XP3500 is compatible with 100V lines (BRIDGE) to enable high-impedance connections capable of driving multiple speakers. The series is optimal for medium-scale facilities including churches, halls and banquet rooms as well as small-scale facilities including conference rooms and restaurants. Other than for use in such facilities, the XP series also realizes excellent performance as power amplifiers for events, exhibitions and concerts.
Yamaha's exclusive state-of-the-art high-efficiency amplifier driving technology EEEngine installed
The XP series adopts a newly designed switching regulator that delivers the ideal power supply to the amplifier. It ensures a more stable and balanced supply of voltage and current, and eliminates fluctuations in output level. The

XP7000 Block Daigram

XP3500 Block Daigram
Monitor / Remote terminals enabling remote monitoring and control
The series is equipped with monitor / remote terminals for monitoring the protection status and output levels, which are crucial for power amplifiers, as well as remote operation of mute and standby from a remote location.

High-accuracy 1dB-step detented attenuator and high-pass filter for switching the cut-off frequency
The attenuator detented in 1dB-step is provided for easy and accurate settings. The series is also equipped with a high-pass filter to cut unwanted low tones. Cut-off frequency points can be selected from 20Hz and 55Hz when constructing a subwoofer system.
The series is equipped with various protection circuits including a circuit for detecting power-on/off, output protection circuit and DC detection circuit. Various indicators display the status of the protection system. Indicators include PROTECTION indicator, TEMP indicator that shows overheating of the heat sink, POWER/STANDBY indicator that shows the power status, as well as SIGNAL and CLIP indicators for each channel. Stepless low- noise fans that efficiently protects the unit from overheating promises high stability.
Best matches with digital mixing engine DME64N/24N and Installation series speakers
The series works significantly well with DSP box DME64N and DME24N capable of programming various types of sound processing for installation sound via GUI, as well as the Yamaha installation loudspeakers lineup.
Various protection circuits, indicators and stepless low-noise fans

Specification

Model Output Power 1kHz 8/STEREO THD+N=0.1% 4/STEREO 8/BRIDGE 20Hz 20kHz 8/STEREO THD+N=0.1% 4/STEREO XP7000 750W+750W 1100W+1100W 2200W 700W+700W 690W+690W(EU) 950W+950W XP5000 525W+525W 750W+750W 1500W 500W+500W 700W+700W XP3500 390W+390W 590W+590W 1180W 350W+350W 450W+450W 435W+435W(EU) XP2500 275W+275W 390W+390W 780W 250W+250W 300W+300W 295W+295W(EU) XP1000 135W+135W 165W+165W 330W 110W+110W(US) 100W+100W 125W+125W(US) 115W+115W(EU) 110W+110W(A) 250W(US), 230(EU), 220W(A) 250W+250W 500W 96dB 20W 170W
70V/STEREO RL=8 8/BRIDGE 100V/BRIDGE RL=16 1kHz 2/STEREO 20mS nonclip 4/BRIDGE S/N Ratio 20Hz-20kHz Idle Power Consumption 35W 1/8 Power Consumption (4/Pink noise) Power Bandwidth (half power THD+N=0.5%) 20Hz 20kHz, half power THD+N Intermodulation Distortion 60Hz: 7kHz, 4:1, half power Frequency Response RL=8, Po=1W,HPF=OFF Channel Separation Half power RL=8 1kHz ATT. Max input 600 shunt Residual Noise Att. min 20Hz-20kHz (DIN AUDIO) Damping Factor 8, f=1kHz Voltage Gain ATT. max Input Att.max Switch Position Sensitivity Rated Power 8 Input Sensitivity(dBu) Maximum Input Voltage Input Impedance Controls Front panel Rear panel Connectors Input Output MONITOR/REMOTE Indicators Load Protection Amplifier Protection Power suplly protection Cooling Power Requirements Dimensions (W x H x D) Weight

0dB=0.775V Half power=1/2 power output level
900W, 870W(EU) 600W, 590W(EU) 625W 1000W+1000W 650W+650W 2000W 1300W 102dB 100dB 30W 25W 450W 320W 10Hz-40kHz 0.1% 0.1% MAX 0dB, TYP 0dB, MIN -1dB fs=20H-50kHz 70dB -70dBu 350(XP7000, XP5000) / 200(XP3500, XP2500, XP1000) 32dB or 26dB or +4dBu input sensitivity by select switch +4dBu 26dB 36dB +4dBu 26dB 36dB +4dBu 26dB 36dB +4dBu 26dB 36dB +4dBu 26dB 36dB +4 +13.7 +7.7 +4 +12.2 +6.2 +4 +10.7 +4.7 +4 +9.2 +3.2 +4 +5.2 -0.8 +22dBu 20k(balance) 10k(unbalance) POWER switch(push on/push off), attenuator(31position) x 2 MODE switch(STEREO/BRIDGE/PARALLEL) x 1, HPF switch (20Hz/55Hz/OFF 12dB/oct) x 2, GAIN SELECT switch(32dB/26dB/+4dBu) x 1 XLR-3-31 type/ch, Euroblock connector(balance)/ch SPEAKON/ch, 5way binding post x 1 Dsub15P x 1 POWER/STANDBY x 1(Green/Orange), SIGNAL x 2(Green), CLIP/LIMIT x 2(Red), PROTECTION x 1(Red), TEMP x 1(Red) heatsink temp 85C POWER switch on/off mute, DC-fault:power supply shutdown/do not return automatically.(XP7000, 5000), output relay off/return automatically.(XP3500,2500,1000) clip limiting :THD 0.5% thermal: cut the output(heatsink temp 90C) do not return automatically. VI limitter(RL 1): Limit the output thermal: power supply shutdown(heatsink temp 100C) do not return automatically.(XP7000,5000), power supply shutdown(transfomer temp 130C)return automatically.(XP3500,2500,1000) Variable-speed fan: x 1(XP3500, 2500, 1000), x 2(XP7000, 5000) (Fan stop at heatsink temp 55C) UC: 120V/60Hz, EU: 230V/50Hz, A: 240V/50Hz 480 x 88 x 456 mm (18-7/8" x 3-7/16" x 17-15/16") 14kg (30.9 Ibs.) 14kg (30.9 Ibs.) 15kg (33.1 Ibs.) 14kg (30.9 Ibs.) 12kg (26.5 Ibs.)
625W+625W 1900W 1600W+1600W 3200W 104dB 35W 650W
1400W 1300W+1300W 2600W 103dB 35W 500W
* Specifications and appearance subject to change without notice.
UC : US & Canadian Models EU : European Models A : Australian Models
YAMAHA Web Site http://www.yamahaproaudio.com
This document is printed on chlorine-free (ECF) paper with soy ink.

Printed in Japan