DIGITAL PIANO

YDP-131/YDP-213
Owner's Manual Bedienungsanleitung Mode d'emploi Manual de instrucciones

ENGLISH

EN U.R.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation 2005 Yamaha Corporation WF16260 5XXAPXXX.X-01A0 Printed in China DE FR ES
Yamaha Manual Library http://www.yamaha.co.jp/manual/

DIC413

ESPAOL

FRANAIS

DEUTSCH
DIGITAL PIANO YDP-131/YDP-213

SPECIAL MESSAGE SECTION

This product utilizes batteries or an external power supply (adapter). DO NOT connect this product to any power supply or adapter other than one described in the manual, on the name plate, or specically recommended by Yamaha. WARNING: Do not place this product in a position where anyone could walk on, trip over ,or roll anything over power or connecting cords of any kind. The use of an extension cord is not recommended! If you must use an extension cord, the minimum wire size for a 25 cord (or less ) is 18 AWG. NOTE: The smaller the AWG number ,the larger the current handling capacity. For longer extension cords, consult a local electrician. This product should be used only with the components supplied or; a cart, rack, or stand that is recommended by Yamaha. If a cart, etc., is used, please observe all safety markings and instructions that accompany the accessory product. Battery Notice: This product MAY contain a small non-rechargeable battery which (if applicable) is soldered in place. The average life span of this type of battery is approximately ve years. When replacement becomes necessary, contact a qualied service representative to perform the replacement. This product may also use household type batteries. Some of these may be rechargeable. Make sure that the battery being charged is a rechargeable type and that the charger is intended for the battery being charged. When installing batteries, do not mix batteries with new, or with batteries of a different type. Batteries MUST be installed correctly. Mismatches or incorrect installation may result in overheating and battery case rupture. Warning: Do not attempt to disassemble, or incinerate any battery. Keep all batteries away from children. Dispose of used batteries promptly and as regulated by the laws in your area. Note: Check with any retailer of household type batteries in your area for battery disposal information. Disposal Notice: Should this product become damaged beyond repair, or for some reason its useful life is considered to be at an end, please observe all local, state, and federal regulations that relate to the disposal of products that contain lead, batteries, plastics, etc. If your dealer is unable to assist you, please contact Yamaha directly.
SPECIFICATIONS SUBJECT TO CHANGE:
The information contained in this manual is believed to be correct at the time of printing. However, Yamaha reserves the right to change or modify any of the specications without notice or obligation to update existing units. This product, either alone or in combination with an amplier and headphones or speaker/s, may be capable of producing sound levels that could cause permanent hearing loss. DO NOT operate for long periods of time at a high volume level or at a level that is uncomfortable. If you experience any hearing loss or ringing in the ears, you should consult an audiologist. IMPORTANT: The louder the sound, the shorter the time period before damage occurs. Some Yamaha products may have benches and / or accessory mounting xtures that are either supplied with the product or as optional accessories. Some of these items are designed to be dealer assembled or installed. Please make sure that benches are stable and any optional xtures (where applicable) are well secured BEFORE using. Benches supplied by Yamaha are designed for seating only. No other uses are recommended.

NAME PLATE LOCATION:

The name plate is located on the bottom of the product. The model number, serial number, power requirements, etc., are located on this plate. You should record the model number, serial number, and the date of purchase in the spaces provided below and retain this manual as a permanent record of your purchase.

NOTICE:

Service charges incurred due to a lack of knowledge relating to how a function or effect works (when the unit is operating as designed) are not covered by the manufacturers warranty, and are therefore the owners responsibility. Please study this manual carefully and consult your dealer before requesting service.

ENVIRONMENTAL ISSUES:

Yamaha strives to produce products that are both user safe and environmentally friendly. We sincerely believe that our products and the production methods used to produce them, meet these goals. In keeping with both the letter and the spirit of the law, we want you to be aware of the following:
Model Serial No. Purchase Date

PLEASE KEEP THIS MANUAL

92-BP (bottom)

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING
* Please keep this manual in a safe place for future reference.

WARNING

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages, re or other hazards. These precautions include, but are not limited to, the following:
Power supply/AC power adaptor
Only use the voltage specied as correct for the instrument. The required voltage is printed on the name plate of the instrument. Use the specied adaptor (PA-5D or an equivalent recommended by Yamaha) only. Using the wrong adaptor can result in damage to the instrument or overheating. Check the electric plug periodically and remove any dirt or dust which may have accumulated on it. Do not place the AC adaptor cord near heat sources such as heaters or radiators, and do not excessively bend or otherwise damage the cord, place heavy objects on it, or place it in a position where anyone could walk on, trip over, or roll anything over it.

Water warning

Never insert or remove an electric plug with wet hands.

Fire warning

Do not put burning items, such as candles, on the unit. A burning item may fall over and cause a re.
If you notice any abnormality
If the AC adaptor cord or plug becomes frayed or damaged, or if there is a sudden loss of sound during use of the instrument, or if any unusual smells or smoke should appear to be caused by it, immediately turn off the power switch, disconnect the adaptor plug from the outlet, and have the instrument inspected by qualied Yamaha service personnel.

Do not open

Do not open the instrument or attempt to disassemble the internal parts or modify them in any way. The instrument contains no user-serviceable parts. If it should appear to be malfunctioning, discontinue use immediately and have it inspected by qualied Yamaha service personnel.

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the instrument or other property. These precautions include, but are not limited to, the following:
When removing the electric plug from the instrument or an outlet, always hold the plug itself and not the cord. Unplug the AC power adaptor when not using the instrument, or during electrical storms. Do not connect the instrument to an electrical outlet using a multiple-connector. Doing so can result in lower sound quality, or possibly cause overheating in the outlet. Do not place the instrument in an unstable position where it might accidentally fall over. Before moving the instrument, remove all connected adaptor and other cables. When setting up the instrument, make sure that the AC outlet you are using is easily accessible. If some trouble or malfunction occurs, immediately turn off the power switch and disconnect the plug from the outlet. Use only the stand specied for the instrument. When attaching the stand or rack, use the provided screws only. Failure to do so could cause damage to the internal components or result in the instrument falling over.

Location

Do not expose the instrument to excessive dust or vibrations, or extreme cold or heat (such as in direct sunlight, near a heater, or in a car during the day) to prevent the possibility of panel disguration or damage to the internal components. Do not use the instrument in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric devices. Otherwise, the instrument, TV, or radio may generate noise.
YDP-131/YDP-213 PRECAUTIONS
Do not expose the instrument to rain, use it near water or in damp or wet conditions, or place containers on it containing liquids which might spill into any openings.

Connections

Before connecting the instrument to other electronic components, turn off the power for all components. Before turning the power on or off for all components, set all volume levels to minimum. Also, be sure to set the volumes of all components at their minimum levels and gradually raise the volume controls while playing the instrument to set the desired listening level.

Saving data

Saving and backing up your data
Data in the instruments internal memory can be lost due to operational errors or malfunction. Be sure to save any important data to external media via a computer connected to the instrument. (page 31)

Maintenance

When cleaning the instrument, use a soft, dry cloth. Do not use paint thinners, solvents, cleaning uids, or chemical-impregnated wiping cloths.

[PHONES] MIDI [IN/OUT]

Connect a MIDI device to this connector to use various MIDI functions (pages 2728). (Connecting MIDI Instrumentspage 27)
A set of standard stereo headphones can be plugged in here for private practice (page 12).

PHONES

OUT IN

[PEDAL]

Connect the pedal cord (page 35).

[DEMO/SONG]

Listen to the playback of a demo song for each voice and 50 piano preset songs (page 15).

[PIANO/VOICE]

Select one of 6 internal sounds, including Grand Piano 1 and 2 (page 18). You can also layer two voices together (page 21) or select various reverb effects (page 20).

[SELECT]

Select a demo song for each voice, or one of the 50 piano preset songs (page 15 and 16). You can also select a different voice while the song playback is stopped.

[REC] [PLAY]

Record your performance (page 25). Play back your recorded performance (page 26).

[METRONOME]

Control the metronome functions (page 23).

[MASTER VOLUME]

Adjust the volume level using this control (page 12).

YDP-131/YDP-213 Features

ENGLISH 9
Before Using the Digital Piano

Key Cover

To open the key cover:
Lift the cover slightly, then push and slide it open.

To close the key cover:

Slide the cover toward you and gently lower the cover over the keys.
Be careful to avoid catching your ngers when opening or closing the cover.
Hold the cover with both hands when opening or closing it. Do not release it until it is fully opened or closed. Be careful to avoid catching ngers (yours or others, especially childrens) between the cover and main unit.
Do not place objects, such as a piece of metal or paper, on top of the key cover. Small objects placed on the key cover may fall inside the unit when the cover is opened and may be nearly impossible to remove. This could cause electric shock, short circuit, re or other serious damage to the instrument. If this happens, turn off the power immediately and unplug the power cord from the AC outlet. Then have the instrument inspected by qualied Yamaha service personnel.

Consecutive playback (D6) The highest key
Press the [SELECT] button to change to the next piano song. Adjusting the Volume Use the [MASTER VOLUME] control to adjust the volume.

2. Stop playback.

To stop the song during playback (or continuous playback), press the [DEMO/ SONG] button. To continue playing other songs, see procedure 1 above.
YDP-131/YDP-213 Listening to 50 Piano Preset Songs
Listening to Songs Loaded from the Computer
You can transfer song data from your computer to this instrument and play back the songs. (See page 31 for more information on loading song data from the computer.)
1. Select and play back a song.
Use the following table to write down the song titles you loaded from the computer. Key D6 E6 D6 C7 F6 F6 Song title

1st song

10th song
Adjusting the Volume Use the [MASTER VOLUME] control to adjust the volume while listening to the song.

G6 G6 A6

Playback will stop automatically when the selected song has nished. To stop the song during playback, press the [DEMO/SONG] button. Selecting a Song Playback Channel If a song loaded from the computer uses a voice that is not supported by this instrument, the originally-assigned voice may not be reproduced accurately. In this case, switching the song playback channel from All to 1 + 2 may improve the tone to more natural sound. Selecting all song playback channels: While pressing and holding down the [DEMO/SONG] button and the [PIANO/ VOICE] button simultaneously, press the B6 key. All channels 1 through 16 will produce the sound.

A6 B6 C7

The top key
Selecting 1 + 2 song playback channels: While pressing and holding down the [DEMO/SONG] button and the [PIANO/ VOICE] button simultaneously, press the C7 key. Channels 1 + 2 will produce the sound.
YDP-131/YDP-213 Listening to Songs Loaded from the Computer
Song numbers (1 through 10) are assigned to the D 6-C7 keys (see the illustration below). While holding down the [DEMO/SONG] button, press one of the D 6-C7 keys to select a song to play back. The selected song starts to play.
You can load up to 10 songs or up to 352 KB of data from the computer.
Selecting & Playing Voices

Selecting Voices

Press and release the [PIANO/VOICE] button to select the Grand Piano 1 voice. While holding down the [PIANO/VOICE] button, press one of the C1-F1 keys to select a voice. Alternatively, you can press the [PIANO/VOICE] button, then press the [SELECT] button repeatedly to select a different voice.

Turn the [MASTER VOLUME] control to adjust the volume level while playing the keyboard.
To understand the characteristics of various voices, listen to demo songs for each voice (page 15). Voice: On this instrument, a voice means a tone or tonal color. Selecting a voice automatically engages the best-suited reverb type and depth (page 20) for that particular voice.

C1 D1 E1 F1

C1 C1 D1 D1 E1 F1
Grand Piano 1 Grand Piano 2 E.Piano Harpsichord Church Organ Strings

Description

Recorded samples from a full concert grand piano. Perfect for classical compositions as well as any other style that requires acoustic piano. Spacious and clear piano with bright reverb. Good for popular music. An electronic piano sound created by FM synthesis. Good for popular music. The denitive instrument for baroque music. Since the strings of a harpsichord are plucked, there is no touch response. This is a typical pipe organ sound (8 feet + 4 feet + 2 feet). Good for sacred music from the Baroque period. Spacious and large-scale string ensemble. Try combining this voice with piano in DUAL mode.
YDP-131/YDP-213 Selecting & Playing Voices

Using the Pedals

Damper (Right) Pedal The damper pedal functions in the same way as a damper pedal on an acoustic piano. When the damper pedal is pressed, notes sustain longer. Releasing the pedal immediately stops (damps) any sustained notes.
When you press the damper pedal here, the notes you play before you release the pedal sustain longer. If the damper pedal doesnt work, make sure that the pedal cord is properly plugged into the main unit (page 35).
Sostenuto (Center) Pedal If you play a note or chord on the keyboard and press the sostenuto pedal while the note(s) are held, those notes will sustain as long as you hold the pedal (as if the damper pedal had been pressed) but all subsequently played notes will not be sustained. This makes it possible to sustain a chord, for example, while other notes are played staccato.
Organ and string voices will continue to sound for as long as the sostenuto pedal is depressed.
When you press the sostenuto pedal here while holding the note, the note will sustain as long as you hold the pedal.

This setting is disabled with some voices, such as an organ sound.
While holding down the [PIANO/VOICE] button, press one of the A6-C7 keys to select the desired touch sensitivity.
Recording your Performance
Your digital pianos recording function enables you to record your performance of one song. The recorded performance is called the user song. Follow the steps below to record and play back your performance. Audio recording and data recording
Be careful not to erase the recorded data: After you record a performance on this instrument, the [PLAY] button indicator lights up. When this indicator remains on, recording another performance will erase the recorded data.
1. Select a voice and other settings for the recording.
While holding down the [PIANO/VOICE] button, press one of the C1F1 keys to select the desired voice(s). (See page 18.) If you desire, you can select other settings, such as the reverb setting. Use the [MASTER VOLUME] control to adjust the volume to a comfortable listening level. You can also use the [MASTER VOLUME] control to adjust the volume level during playback.
You cannot engage Record mode while a demo song is playing. Recording capacity Recording capacity is the maximum amount of performance data that you can record. This instruments recording capacity is 65 KB (approximately 11,000 notes). Changing the settings for the recorded user song To change the settings for the recorded user song, engage Record mode, change the settings as you desire, then stop recording without playing the keyboard. For example, if you wish to change the voice of the user song, press the [REC] button to engage Record mode (see Step 2), then select a different voice (see Step 1). Without playing the keyboard, press the [REC] button to stop recording (see Step 4).

2. Engage Record mode.

Press the [REC] button.
Press the [REC] button again if you wish to cancel Record mode.

3. Start recording.

Recording starts as soon as you play the keyboard. Alternatively, press the [PLAY] button to start recording.
Do not turn off the power to this instrument while it is recording the data in its internal memory (that is, while the [REC] and [PLAY] button indicators are ashing). Otherwise, all recorded data, including the data being recorded, will be lost. You can save the recorded user song to a computer. You can also load the user song data from a computer and play it back on this instrument. (See page 31.)

4. Stop recording.

YDP-131/YDP-213 Recording your Performance

Cassette tape recordings use a different data format than this instrument. Cassette tapes record audio signals. On the other hand, this instrument records information about the notes and voices being played and about the timing and tempo of those notes. It does not record audio signals. When you play back a recorded performance on this instrument, its internal tone generator reproduces the sound according to the recorded information.
Playing Back Recorded Performance Data

1. Start the playback.

Press the [PLAY] button.
You cannot adjust the tempo of the recorded user song. The user song always plays at the recorded tempo.

2. Stop the playback.

When the user song nishes playing back, this instrument automatically returns to the previous mode. To stop the playback, press the [PLAY] button.
Connecting MIDI Instruments
Your digital piano features MIDI connectors. Using the MIDI functions enables you to access a variety of musical genres.
Since MIDI data that can be transmitted or received varies depending on the type of MIDI device, check the MIDI Implementation Chart to nd out what MIDI data and commands your devices can transmit or receive. This instruments MIDI Implementation Chart appears on page 44. You need a dedicated MIDI cable (optional) to make a MIDI connection. You can purchase MIDI cables at musical instrument stores. If you connect a very long MIDI cable, data transmission errors may result. Use a MIDI cable of 15 meters or less. Before connecting a MIDI device to this instrument, rst turn off the power to both this instrument and the MIDI device. After connecting them, turn on the power to the MIDI device rst, then turn on the power to this instrument.

About MIDI

MIDI (Musical Instrument Digital Interface) is a global format standard for performance data transmission and reception between electronic musical instruments. Connecting musical instruments that support MIDI via MIDI cables enables you to transfer performance and setting data between multiple musical instruments. Using MIDI, you can also achieve more advanced performances than using just a single musical instrument.

MIDIs Capability

MIDI functions enable you to transfer performance data between MIDI devices, load song data from a connected computer to your instrument, and transmit and save user song data to a computer.
Transferring performance data to and from another MIDI device
MIDI OUT connector MIDI IN connector You cannot transmit the voice demo songs and the 50 piano preset songs from this instrument to another MIDI device. MIDI instrument
Optional MIDI IN MIDI OUT connector MIDI cables connector
Transferring MIDI data to and from a computer
OUT USB port Optional USB-MIDI interface (e.g., Yamaha UX16) MIDI IN connector For more information on the transmission and reception of song data, refer to Transmitting Song Data between the Computer and the Digital Piano on page 31.

Computer

MIDI OUT connector
YDP-131/YDP-213 Connecting MIDI Instruments
Connecting the Digital Piano to a Computer
Connecting the digital piano to a computer using the MIDI connectors enables you to transfer MIDI data between the piano and the computer.
When this instrument is used as a tone module, performance data with voices that are not found on this instrument will not be played correctly. Before you connect this instrument to a computer, rst turn off the power to both this instrument and the computer. After you make the connections, turn on the power to the computer rst, then turn on the power to this instrument.
An example of connecting this instrument to the USB port on a computer
Use an optional USB-MIDI interface (such as a Yamaha UX16) to connect this instruments MIDI connectors to the computers USB port. You must install the USB-MIDI driver on the computer correctly so that you can control your MIDI instrument from the computer. The USB-MIDI driver is a software application that enables MIDI signals to be transmitted between the sequence software on the computer and the connected MIDI instrument. For more information, refer to the users manual that came with the USB interface device.
Connecting this instrument to the computer using a USB-MIDI interface
Turn off the power to this instrument. Connect the MIDI OUT cable from the USB-MIDI interface to this instruments MIDI IN connector, and connect the MIDI IN cable from the USB-MIDI interface to this instruments MIDI OUT connector. The connection between this instrument and the computer has now been established. Turn on the power to this instrument and try to transfer MIDI data to or from the computer. For more information on connecting the YAMAHA UX16, refer to the users manual that came with the UX16.
You must install a software application on the computer to be able to transfer MIDI data between this instrument and a computer.
YDP-131/YDP-213 Connecting the Digital Piano to a Computer

MIDI Functions

You can make detailed adjustments to MIDI settings.
MIDI Transmit/Receive Channel Selection
In any MIDI control setup, the MIDI channels of the transmitting and receiving equipment must be matched for proper data transfer. This parameter enables you to specify the channel on which the digital piano transmits or receives MIDI data.
In Dual mode, Voice 1 data is transmitted on its specied channel and Voice 2 data is transmitted on the next greater channel number relative to the specied channel. In this mode, no data is transmitted if the transmit channel is set to OFF. ALL: A Multi-timbre Receive mode is available. In this mode, this instrument receives different parts from the connected MIDI device on any or all 16 MIDI channels and plays multi-channel song data. 1+2: A 1+2 Receive mode is available. It allows simultaneous reception on channels 1 and 2 only, enabling this instrument to play 1 and 2 channel song data received from a music computer or sequencer. Program change and other like channel messages received will not affect this instruments panel settings or the notes you play on the keyboard. Data for the demo song and 50 piano preset songs cannot be transmitted via MIDI.

For information on program change numbers for each of this instruments voices, refer to page 40 in the MIDI Data Format section.
While holding down the [DEMO/SONG] and [PIANO/VOICE] buttons simultaneously, press the C 6 key. Pressing the C 6 key repeatedly toggles between Program Change On and Off.

Control Change ON/OFF

MIDI Control Change data refers to MIDI information related to performance expression (such as damper pedal information). You can transmit MIDI Control Change data from this instrument to control the operation of a connected MIDI device. (For example, if you operate this instruments damper pedal, this instrument will transmit MIDI Control Change data.) On the other hand, MIDI performance data received on this instrument from a connected MIDI device will respond to MIDI Control Change data received from the MIDI device at the same time. (However, the voice you are currently playing on the keyboard will not respond to the MIDI Control Change data.) The ability to transmit and receive MIDI Control Change data is sometimes very useful. Turn Control Change On if it is convenient for you to have this capability. Turn Control Change Off if you rather prefer not to have this capability.
For information on control changes that can be used with this instrument, refer to the MIDI Data Format on page 40.
While holding down the [DEMO/SONG] and [PIANO/VOICE] buttons simultaneously, press the D6 key. Pressing the D6 key repeatedly toggles between Control Change On and Off.
Transmitting Song Data between the Computer and the Digital Piano
In addition to the demo songs and the 50 piano preset songs stored in this instrument, you can play data for other song by loading it from a connected computer. To be able to use this function, you must rst download Musicsoft Downloader from Yamaha website at the following URL, and install it on your computer. http://music.yamaha.com/download/
You can download free Musicsoft Downloader from the Yamaha website.
System requirement for Musicsoft Downloader
OS : Windows 98SE/Me/2000/XP Home Edition/XP Professional

Others

: Microsoft Internet Explorer version 5.5 or higher
Loading Song Data from a Computer to the Digital Piano
You can load piano song data from a computer to this instrument. Also, after you record your performance on this instrument and save the recording to a computer, you can load the recording back to the instrument. This instrument can read MIDI data in SMF Format 0. However, if such data includes any information for functions that are not supported by this instrument, the instrument will not play the data correctly. For more information on loading song data from a computer to this instrument, please refer to Transferring Data Between the Computer and Instrument (for unprotected data) in the Help le that came with Musicsoft Downloader.

Data format: [F0H] -> [43H] -> [0nH] -> [4CH] -> [aaH] -> [bbH] -> [hhH] -> [mmH] -> [llH] ->[ddH] ->.-> [ccH] -> [F7H]
F0H = Exclusive status 43H = YAMAHA ID 0nH = When received, n=0~F. When transmitted, n=0. 4CH = Model ID of XG aaH = ByteCount bbH = ByteCount hhH = Address High mmH = Address Mid llH = Address Low ddH = Data | | | | ccH = Check sum F7H = End of Exclusive Receipt of the XG SYSTEM ON message causes reinitialization of relevant parameters and Control Change values. Allow sufcient time for processing to execute (about 50 msec) before sending this instrument another message. XG Native Parameter Change message may contain two or four bytes of parameter data (depending on the parameter size). For information about the Address and Byte Count values, refer to Table 1 below. Note that the tables Total Size value gives the size of a bulk block. Only the top address of the block (00H, 00H, 00H) is valid as a bulk data address.
vvH 00H : off 01H : 02H : 2/4 03H : 3/4 04H : 4/4 05H : 5/4 06H : 6/4 7FH : No accent Channel Detune ch: 00H-0FH 43H (Sets the Detune value for each channel) 00H-7FH Voice Reserve ch: 00H-0FH 45H 00H : Reserve off 7FH : on* * When Volume, Expression is received for Reserve On, they will be effective from the next Key On. Reserve Off is normal.

Control Metronome

11. SYSTEM EXCLUSIVE MESSAGES (Others)
Data format: [F0H] -> [43H] -> [1nH] -> [27H] -> [30H] -> [00H] -> [00H] -> [mmH] -> [llH] -> [ccH] -> [F7H]
Master Tuning (XG and last message priority) simultaneously changes the pitch of all channels. F0H = Exclusive Status 43H = Yamaha ID 1nH = When received, n=0~F. When transmitted, n=0. 27H = Model ID of TG100 30H = Sub ID 00H = 00H = mmH = Master Tune MSB llH = Master Tune LSB ccH = dont care (under 7FH) F7H = End of Exclusive
9. SYSTEM EXCLUSIVE MESSAGES (Digital Piano MIDI Format)
Data format: [F0H] -> [43H] -> [73H] -> [xxH] -> [nnH] -> [F7H]
F0H = 43H = 73H = 01H = xxH = nn 02H 03H 06H F7H = Exclusive status Yamaha ID Digital Piano ID Product ID (digital piano common) Substatus Control Internal MIDI clock External MIDI clock Bulk Data (the bulk data follows 06H) End of Exclusive

<Table 1>

MIDI Parameter Change table (SYSTEM) Address (H) Size (H) Data (H) 020C - 05F4(*1) 1 7E 7F TOTAL SIZE - 7F Parameter MASTER TUNE Description -50 - +50[cent] 1st bit 3 - 0 bit 15 - 12 2nd bit 3 - 0 bit 11 - 8 3rd bit 3 - 0 bit 7 - 4 4th bit 3 - 0 bit 3 - - 127 00=XG sytem ON 00=ON (receive only) Default value (H) 400

MASTER VOLUME XG SYSTEM ON RESET ALL PARAMETERS
*1: Values lower than 020CH select -50 cents. Values higher than 05F4H select +50 cents.

<Table 2>

MIDI Parameter Change table (EFFECT 1)
Refer to the Effect MIDI Map for a complete list of Reverb, Chorus and Variation type numbers. Address (H) 00 Size (H) 2 Data (H) 00-7F 00-7F Parameter REVERB TYPE MSB REVERB TYPE LSB Description Refer to Effect MIDI Map 00 : basic type Refer to Effect MIDI Map 00 : basic type Default value (H) 01(=HALL1) 00 00(=Effect off) 00
00-7F VARIATION TYPE MSB 00-7F VARIATION TYPE LSB VARIATION refers to the EFFECT on the panel.

<Table 3>

MIDI Parameter Change table (MULTI PART)
Address (H) Size (H) 08 nn nn = Part Number Data (H) 00 - 7F Parameter DRY LEVEL Description 0 - 127 Default value (H) 7F

Effect MIDI Map

REVERB ROOM HALL 1 HALL 2 STAGE OFF EFFECT CHORUS PHASER TREMOLO ROTARY SP OFF MSB 42H 48H 46H 47H 00H LSB 10H 10H 10H 10H 00H MSB 02H 01H 01H 03H 00H LSB 10H 10H 11H 10H 00H
MIDI Implementation Chart

YAMAHA

[ Digital Piano ] Model YDP-131/YDP-213 MIDI Implementation Chart
Date :08-APR-2005 Version : 1.0

Function.

Transmitted

Recognized

Remarks

Basic Channel Mode

Default Changed Default Messages Altered
1 1-x ************** 0-127
1-16 1-x x 0-127 0-127 o 9nH,v=1-127 x x x o 0-24 semi o o o o o o o o o o o Bank Select Modulation Main Volume Panpot Expression Data Entry Portament Control Effect Depth RPN Inc, Dec RPN LSB, MSB

Note Number Velocity

True voice Note ON Note OFF Key's Ch's
************** o 9nH,v=1-127 x x x x *1
After Touch Pitch Bend Control Change
0,11 6, 38 64,66,91,94 96-97 100-101

o x o x x x o x o x x

*1 *1 *1 *1 *1 *1 *1

Prog Change

True #
o 0 - 127 ************** o x x x o o o o x o o x

o 0 - 127

System Exclusive Common : Song Pos. : Song Sel. : Tune : Clock : Commands : : : : : : All Sound Off Reset All Cntrls Local ON/OFF All Notes OFF Active Sense Reset
o x x x o o o o o o o x (120,126,127) (121) (122) (123-125)
System Real Time Aux Messages

Notes:

*1 These Control Change messages are not transmitted via panel operation, but may be transmitted during song playback.
Mode 1 : OMNI ON, POLY Mode 3 : OMNI OFF, POLY
Mode 2 : OMNI ON, MONO Mode 4 : OMNI OFF, MONO

o : Yes x : No

Specications / Technische Daten / Caractristiques techniques / Especicaciones
Item Keyboard Sound Source Polyphony Voice Selection Effect Volume Controls Pedal Demo Songs Recording Function Loading song data from a computer Jacks/Connectors Main Ampliers Speakers Dimensions (W D H) (with music rest) Weight Accessories YDP-131/YDP-keys (A-1 - C7) AWM Stereo Sampling 64 Notes Max. 6 Reverb Master Volume Dual, Metoronome, Transpose Damper, Sostenuto, Soft 6 Demo Songs, 50 Piano Preset Songs One song 65 KB (approx. 11,000 notes) Up to 10 songs; Total maximum size 352 KB MIDI (IN/OUT), PHONES 2 6W 2 Oval (12cm 6cm) 2 YDP-131: 1357mm 420mm 822mm [53-3/8" 16-1/2" 32-3/8"] (1357mm 420mm 971mm) [53-3/8" 16-1/2" 38-1/4"] YDP-213: 1357mm 420mm 817mm [53-3/8" 16-1/2" 32-1/8"] (1357mm 420mm 985mm) [53-3/8" 16-1/2" 38-3/4"] 37kg (81lbs., 9oz) Owners Manual, 50 greats for the Piano (Music Book), Bench (included or optional depending on locale), Quick Operation Guide, Assembly parts

IRELAND

Danfay Ltd. 61D, Sallynoggin Road, Dun Laoghaire, Co. Dublin Tel: 01-2859177

OTHER ASIAN COUNTRIES

Yamaha Corporation, Asia-Pacic Music Marketing Group Nakazawa-cho 10-1, Hamamatsu, Japan 430-8650 Tel: +81-53-460-2317

GERMANY

Yamaha Music Central Europe GmbH Siemensstrae 22-34, 25462 Rellingen, Germany Tel: 04101-3030

OTHER EUROPEAN COUNTRIES

Yamaha Music Central Europe GmbH Siemensstrae 22-34, 25462 Rellingen, Germany Tel: +49-4101-3030
SWITZERLAND/LIECHTENSTEIN
Yamaha Music Central Europe GmbH, Branch Switzerland Seefeldstrasse 94, 8008 Zrich, Switzerland Tel: 01-383 3990

AFRICA

Yamaha Corporation, Asia-Pacic Music Marketing Group Nakazawa-cho 10-1, Hamamatsu, Japan 430-8650 Tel: +81-53-460-2312

OCEANIA

AUSTRALIA
Yamaha Music Australia Pty. Ltd. Level 1, 99 Queensbridge Street, Southbank, Victoria 3006, Australia Tel: 3-9693-5111

AUSTRIA

Yamaha Music Central Europe GmbH, Branch Austria Schleiergasse 20, A-1100 Wien, Austria Tel: 01-60203900

MIDDLE EAST

TURKEY/CYPRUS

NEW ZEALAND

Music Houses of N.Z. Ltd. 146/148 Captain Springs Road, Te Papapa, Auckland, New Zealand Tel: 9-634-0099
CZECH REPUBLIC/SLOVAKIA/ HUNGARY/SLOVENIA
Yamaha Music Central Europe GmbH, Branch Austria, CEE Department Schleiergasse 20, A-1100 Wien, Austria Tel: 01-602039025

OTHER COUNTRIES

Yamaha Music Gulf FZE LB21-128 Jebel Ali Freezone P.O.Box 17328, Dubai, U.A.E. Tel: +971-4-881-5868
COUNTRIES AND TRUST TERRITORIES IN PACIFIC OCEAN

POLAND

Yamaha Music Central Europe GmbH Sp.z. o.o. Oddzial w Polsce ul. 17 Stycznia 56, PL-02-146 Warszawa, Poland Tel: 022-868-07-57
HEAD OFFICE Yamaha Corporation, Pro Audio & Digital Musical Instrument Division
Nakazawa-cho 10-1, Hamamatsu, Japan 430-8650 Tel: +81-53-460-3273

[CL] 37

DIGITAL PIANO

YDP-131/YDP-213

Owner's Manual Bedienungsanleitung Mode d'emploi Manual de instrucciones

ENGLISH

EN U.R.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation 2005 Yamaha Corporation WF16260 5XXAPXXX.X-01A0 Printed in China DE FR ES
Yamaha Manual Library http://www.yamaha.co.jp/manual/

DIC413

ESPAOL

FRANAIS

DEUTSCH
DIGITAL PIANO YDP-131/YDP-213

SPECIAL MESSAGE SECTION

This product utilizes batteries or an external power supply (adapter). DO NOT connect this product to any power supply or adapter other than one described in the manual, on the name plate, or specically recommended by Yamaha. WARNING: Do not place this product in a position where anyone could walk on, trip over ,or roll anything over power or connecting cords of any kind. The use of an extension cord is not recommended! If you must use an extension cord, the minimum wire size for a 25 cord (or less ) is 18 AWG. NOTE: The smaller the AWG number ,the larger the current handling capacity. For longer extension cords, consult a local electrician. This product should be used only with the components supplied or; a cart, rack, or stand that is recommended by Yamaha. If a cart, etc., is used, please observe all safety markings and instructions that accompany the accessory product. Battery Notice: This product MAY contain a small non-rechargeable battery which (if applicable) is soldered in place. The average life span of this type of battery is approximately ve years. When replacement becomes necessary, contact a qualied service representative to perform the replacement. This product may also use household type batteries. Some of these may be rechargeable. Make sure that the battery being charged is a rechargeable type and that the charger is intended for the battery being charged. When installing batteries, do not mix batteries with new, or with batteries of a different type. Batteries MUST be installed correctly. Mismatches or incorrect installation may result in overheating and battery case rupture. Warning: Do not attempt to disassemble, or incinerate any battery. Keep all batteries away from children. Dispose of used batteries promptly and as regulated by the laws in your area. Note: Check with any retailer of household type batteries in your area for battery disposal information. Disposal Notice: Should this product become damaged beyond repair, or for some reason its useful life is considered to be at an end, please observe all local, state, and federal regulations that relate to the disposal of products that contain lead, batteries, plastics, etc. If your dealer is unable to assist you, please contact Yamaha directly.
SPECIFICATIONS SUBJECT TO CHANGE:
The information contained in this manual is believed to be correct at the time of printing. However, Yamaha reserves the right to change or modify any of the specications without notice or obligation to update existing units. This product, either alone or in combination with an amplier and headphones or speaker/s, may be capable of producing sound levels that could cause permanent hearing loss. DO NOT operate for long periods of time at a high volume level or at a level that is uncomfortable. If you experience any hearing loss or ringing in the ears, you should consult an audiologist. IMPORTANT: The louder the sound, the shorter the time period before damage occurs. Some Yamaha products may have benches and / or accessory mounting xtures that are either supplied with the product or as optional accessories. Some of these items are designed to be dealer assembled or installed. Please make sure that benches are stable and any optional xtures (where applicable) are well secured BEFORE using. Benches supplied by Yamaha are designed for seating only. No other uses are recommended.

1. NOTE ON/OFF

Data format: [9nH] -> [kk] -> [vv]
9nH = Note ON/OFF event (n = channel number) kk = Note number (Transmit: 09H ~ 78H = A-2 ~ C8 / Receive: 00H ~ 7FH = C-2 ~ G8) vv = Velocity (Key ON = 01H ~ 7FH, Key OFF = 00H)

3. MODE MESSAGES

Data format: [BnH] -> [cc] -> [vv]
BnH = Control event (n = channel number) cc = Control number vv = Data Range (1) All Sound Off ccH Parameter 78H All Sound Off (2) Reset All Controllers ccH Parameter 79H Reset All Controllers Resets controllers as follows. Controller Expression Damper Pedal Sostenuto Soft Pedal Data Range (vvH) 00H Data Range (vvH) 00H Value 127 (max) 0 (off) 0 (off) 0 (off)
Data format: [8nH] -> [kk] -> [vv] (reception only)
8nH = Note OFF event (n = channel number) kk = Note number: 00H ~ 7FH = C-2 ~ G8) vv = Velocity

2. CONTROL CHANGE

BnH = Control change (n = channel number) cc = Control number vv = Data Range (1) Bank Select ccH Parameter Data Range (vvH) 00H Bank Select MSB 00H:Normal 20H Bank Select LSB 00H.7FH Bank selection processing does not occur until receipt of next Program Change message. (2) Main Volume ccH Parameter 07H Volume MSB Data Range (vvH) 00H.7FH
(3) Local Control (reception only) ccH Parameter Data Range (vvH) 7AH Local Control 00H (off), 7FH (on) (4) All Notes Off ccH Parameter Data Range (vvH) 7BH All Notes Off 00H Switches OFF all the notes that are currently ON on the specied channel. Any notes being held by the damper or sostenuto pedal will continue to sound until the pedal is released. (5) Omni Off (reception only) ccH Parameter Data Range (vvH) 7CH Omni Off 00H Same processing as for All Notes Off. (6) Omni On (reception only) ccH Parameter Data Range (vvH) 7DH Omni On 00H Same processing as for All Notes Off. (7) Mono (reception only) ccH Parameter Data Range (vvH) 7EH Mono 00H Same processing as for All Sound Off. (8) Poly (reception only) ccH Parameter Data Range (vvH) 7FH Poly 00H Same processing as for All Sound Off. When Control Change is turned OFF, Control Change messages will not be transmitted or received. Local on/off, OMNI on/off are not transmitted. (The appropriate note off number is supplied with All Note Off transmission). When a voice bank MSB/LSB is received, the number is stored in the internal buffer regardless of the received order, then the stored value is used to select the appropriate voice when a program change message is received. Poly mode is always active. This mode will not change when the instrument receives MONO/POLY mode message.
(3) Expression (reception only) ccH Parameter Data Range (vvH) 0BH Expression MSB 00H.7FH (4) Damper ccH Parameter 40H Damper MSB (5) Sostenuto ccH Parameter 42H Sostenuto (6) Soft Pedal ccH Parameter 43H Soft Pedal Data Range (vvH) 00H.7FH Data Range (vvH) 00H-3FH:off, 40H-7FH:on Data Range (vvH) 00H-3FH:off, 40H-7FH:on

(7) Effect1 Depth (Reverb Send Level) ccH Parameter Data Range (vvH) 5BH Effect1 Depth 00H.7FH Adjusts the reverb send level.
(8) Effect4 Depth (Variation Effect Send Level) ccH Parameter Data Range (vvH) 5EH Effect4 Depth 00H.7FH (9) RPN 65H RPN MSB 64H RPN LSB 06H Data Entry MSB 26H Data Entry LSB 60H Data Increment 61H Data Decrement * Parameters that are controllable with RPN Coarse Tune Fine Tune Pitch Bend Range
YDP-131/YDP-213 Appendix/Anhang/Annexe/Apndice

4. PROGRAM CHANGE

Data format: [CnH] -> [ppH]
CnH = Program event (n = channel number) ppH = Program change number P.C.#=Program Change number
YDP-131/YDP-213 Grand Piano 1 Grand Piano 2 E.Piano Harpsichord Church Organ Strings MSB LSB P.C.# 20 49
7. SYSTEM EXCLUSIVE MESSAGES (Universal System Exclusive)
(1) Universal Realtime Message
Data format: [F0H] -> [7FH] -> [XnH] -> [04H] -> [01H] -> [llH] -> [mmH] -> [F7H] MIDI Master Volume
Simultaneously changes the volume of all channels. When a MIDI master volume message is received, the volume only has affect on the MIDI receive channel, not the panel master volume. F0H = Exclusive status 7FH = Universal Realtime 7FH = ID of target device 04H = Sub-ID #1=Device Control Message 01H = Sub-ID #2=Master Volume llH = Volume LSB mmH = Volume MSB F7H = End of Exclusive or F0H = Exclusive status 7FH = Universal Realtime XnH = When n is received n=0~F, whichever is received. X = dont care 04H = Sub-ID #1=Device Control Message 01H = Sub-ID #2=Master Volume llH = Volume LSB mmH = Volume MSB F7H = End of Exclusive (2) Universal Non-Realtime Message (GM On)
When program change reception is turned OFF, no program change data is transmitted or received. When you specify a program change as a number in the range of 0-127, specify a number that is one less than the program change number listed above. For example, to specify program change number 1, you would specify program change 0.

5. Pitch Bend Change

[EnH] -> [ccH] -> [ddH] ccH = LSB ddH = MSB
6. SYSTEM REALTIME MESSAGES

[rrH] F8H: Timing clock FAH: Start FCH: Stop FEH: Active sensing
General MIDI Mode On Data format: [F0H] -> [7EH] -> [XnH] -> [09H] -> [01H] -> [F7H]
Reception Received as 96-clock tempo timing when MIDI clock is set to External. Song start Not received when the MIDI clock is set to Internal. Song stop Not received when the MIDI clock is set to Internal. If a signal is not received via MIDI for more than 400 milliseconds, the same processing will take place for All Sound Off, All Notes Off and Reset All Controllers as when those signals are received.

Data F8H FAH

Transmission Transmitted every 96 clocks Song start

Song stop

Transmitted every 200 milliseconds
If an error occurs during MIDI reception, the Damper, Sostenuto, and Soft effects for all channels are turned off and an All Note Off occurs.
F0H = Exclusive status 7EH = Universal Non-Realtime 7FH = ID of target device 09H = Sub-ID #1=General MIDI Message 01H = Sub-ID #2=General MIDI On F7H = End of Exclusive or F0H = Exclusive status 7EH = Universal Non-Realtime XnH = When received, n=0~F. X = dont care 09H = Sub-ID #1=General MIDI Message 01H = Sub-ID #2=General MIDI On F7H = End of Exclusive When the General MIDI mode ON message is received, the MIDI system will be reset to its default settings. This message requires approximately 50ms to execute, so sufcient time should be allowed before the next message is sent.
8. SYSTEM EXCLUSIVE MESSAGES (XG Standard)
(1) XG Native Parameter Change
10. SYSTEM EXCLUSIVE MESSAGES (Special Control)
Data format: [F0H] -> [43H] -> [73H] -> [66H] -> [11H] -> [0nH] -> [ccH] -> [vvH] -> [F7H]
F0H = 43H = 73H = 7FH = 4BH = 11H = 0nH = cc = vv = F7H = Exclusive status Yamaha ID Digital Piano ID Extended Product ID Product ID Special control Control MIDI change (n=channel number) Control number Value End of Exclusive Channel Always 00H ccH 1BH
Data format: [F0H] -> [43H] -> [1nH] -> [4CH] -> [hhH] -> [mmH] -> [llH] -> [ddH] -> [F7H]
F0H = Exclusive status 43H = YAMAHA ID 1nH = When received, n=0~F. When transmitted, n=0. 4CH = Model ID of XG hhH = Address High mmH = Address Mid llH = Address Low ddH = Data | F7H = End of Exclusive Data size must match parameter size (2 or 4 bytes). When the XG System On message is received, the MIDI system will be reset to its default settings. The message requires approximately 50ms to execute, so sufcient time should be allowed before the next message is sent. (2) XG Native Bulk Data (reception only)
Data format: [F0H] -> [43H] -> [0nH] -> [4CH] -> [aaH] -> [bbH] -> [hhH] -> [mmH] -> [llH] ->[ddH] ->.-> [ccH] -> [F7H]
F0H = Exclusive status 43H = YAMAHA ID 0nH = When received, n=0~F. When transmitted, n=0. 4CH = Model ID of XG aaH = ByteCount bbH = ByteCount hhH = Address High mmH = Address Mid llH = Address Low ddH = Data | | | | ccH = Check sum F7H = End of Exclusive Receipt of the XG SYSTEM ON message causes reinitialization of relevant parameters and Control Change values. Allow sufcient time for processing to execute (about 50 msec) before sending this instrument another message. XG Native Parameter Change message may contain two or four bytes of parameter data (depending on the parameter size). For information about the Address and Byte Count values, refer to Table 1 below. Note that the tables Total Size value gives the size of a bulk block. Only the top address of the block (00H, 00H, 00H) is valid as a bulk data address.

vvH 00H : off 01H : 02H : 2/4 03H : 3/4 04H : 4/4 05H : 5/4 06H : 6/4 7FH : No accent Channel Detune ch: 00H-0FH 43H (Sets the Detune value for each channel) 00H-7FH Voice Reserve ch: 00H-0FH 45H 00H : Reserve off 7FH : on* * When Volume, Expression is received for Reserve On, they will be effective from the next Key On. Reserve Off is normal.

Control Metronome

11. SYSTEM EXCLUSIVE MESSAGES (Others)
Data format: [F0H] -> [43H] -> [1nH] -> [27H] -> [30H] -> [00H] -> [00H] -> [mmH] -> [llH] -> [ccH] -> [F7H]
Master Tuning (XG and last message priority) simultaneously changes the pitch of all channels. F0H = Exclusive Status 43H = Yamaha ID 1nH = When received, n=0~F. When transmitted, n=0. 27H = Model ID of TG100 30H = Sub ID 00H = 00H = mmH = Master Tune MSB llH = Master Tune LSB ccH = dont care (under 7FH) F7H = End of Exclusive
9. SYSTEM EXCLUSIVE MESSAGES (Digital Piano MIDI Format)
Data format: [F0H] -> [43H] -> [73H] -> [xxH] -> [nnH] -> [F7H]
F0H = 43H = 73H = 01H = xxH = nn 02H 03H 06H F7H = Exclusive status Yamaha ID Digital Piano ID Product ID (digital piano common) Substatus Control Internal MIDI clock External MIDI clock Bulk Data (the bulk data follows 06H) End of Exclusive

<Table 1>

MIDI Parameter Change table (SYSTEM) Address (H) Size (H) Data (H) 020C - 05F4(*1) 1 7E 7F TOTAL SIZE - 7F Parameter MASTER TUNE Description -50 - +50[cent] 1st bit 3 - 0 bit 15 - 12 2nd bit 3 - 0 bit 11 - 8 3rd bit 3 - 0 bit 7 - 4 4th bit 3 - 0 bit 3 - - 127 00=XG sytem ON 00=ON (receive only) Default value (H) 400
MASTER VOLUME XG SYSTEM ON RESET ALL PARAMETERS
*1: Values lower than 020CH select -50 cents. Values higher than 05F4H select +50 cents.

<Table 2>

MIDI Parameter Change table (EFFECT 1)
Refer to the Effect MIDI Map for a complete list of Reverb, Chorus and Variation type numbers. Address (H) 00 Size (H) 2 Data (H) 00-7F 00-7F Parameter REVERB TYPE MSB REVERB TYPE LSB Description Refer to Effect MIDI Map 00 : basic type Refer to Effect MIDI Map 00 : basic type Default value (H) 01(=HALL1) 00 00(=Effect off) 00
00-7F VARIATION TYPE MSB 00-7F VARIATION TYPE LSB VARIATION refers to the EFFECT on the panel.

<Table 3>

MIDI Parameter Change table (MULTI PART)
Address (H) Size (H) 08 nn nn = Part Number Data (H) 00 - 7F Parameter DRY LEVEL Description 0 - 127 Default value (H) 7F

Effect MIDI Map

REVERB ROOM HALL 1 HALL 2 STAGE OFF EFFECT CHORUS PHASER TREMOLO ROTARY SP OFF MSB 42H 48H 46H 47H 00H LSB 10H 10H 10H 10H 00H MSB 02H 01H 01H 03H 00H LSB 10H 10H 11H 10H 00H
MIDI Implementation Chart

YAMAHA

[ Digital Piano ] Model YDP-131/YDP-213 MIDI Implementation Chart
Date :08-APR-2005 Version : 1.0

Function.

Transmitted

Recognized

Remarks

Basic Channel Mode

Default Changed Default Messages Altered
1 1-x ************** 0-127
1-16 1-x x 0-127 0-127 o 9nH,v=1-127 x x x o 0-24 semi o o o o o o o o o o o Bank Select Modulation Main Volume Panpot Expression Data Entry Portament Control Effect Depth RPN Inc, Dec RPN LSB, MSB

Note Number Velocity

True voice Note ON Note OFF Key's Ch's
************** o 9nH,v=1-127 x x x x *1
After Touch Pitch Bend Control Change
0,11 6, 38 64,66,91,94 96-97 100-101

o x o x x x o x o x x

*1 *1 *1 *1 *1 *1 *1

Prog Change

True #
o 0 - 127 ************** o x x x o o o o x o o x

o 0 - 127

System Exclusive Common : Song Pos. : Song Sel. : Tune : Clock : Commands : : : : : : All Sound Off Reset All Cntrls Local ON/OFF All Notes OFF Active Sense Reset
o x x x o o o o o o o x (120,126,127) (121) (122) (123-125)
System Real Time Aux Messages

Notes:

*1 These Control Change messages are not transmitted via panel operation, but may be transmitted during song playback.
Mode 1 : OMNI ON, POLY Mode 3 : OMNI OFF, POLY
Mode 2 : OMNI ON, MONO Mode 4 : OMNI OFF, MONO

o : Yes x : No

Specications / Technische Daten / Caractristiques techniques / Especicaciones
Item Keyboard Sound Source Polyphony Voice Selection Effect Volume Controls Pedal Demo Songs Recording Function Loading song data from a computer Jacks/Connectors Main Ampliers Speakers Dimensions (W D H) (with music rest) Weight Accessories YDP-131/YDP-keys (A-1 - C7) AWM Stereo Sampling 64 Notes Max. 6 Reverb Master Volume Dual, Metoronome, Transpose Damper, Sostenuto, Soft 6 Demo Songs, 50 Piano Preset Songs One song 65 KB (approx. 11,000 notes) Up to 10 songs; Total maximum size 352 KB MIDI (IN/OUT), PHONES 2 6W 2 Oval (12cm 6cm) 2 YDP-131: 1357mm 420mm 822mm [53-3/8" 16-1/2" 32-3/8"] (1357mm 420mm 971mm) [53-3/8" 16-1/2" 38-1/4"] YDP-213: 1357mm 420mm 817mm [53-3/8" 16-1/2" 32-1/8"] (1357mm 420mm 985mm) [53-3/8" 16-1/2" 38-3/4"] 37kg (81lbs., 9oz) Owners Manual, 50 greats for the Piano (Music Book), Bench (included or optional depending on locale), Quick Operation Guide, Assembly parts
* Specications and descriptions in this owners manual are for information purposes only. Yamaha Corp. reserves the right to change or modify products or specications at any time without prior notice. Since specications, equipment or options may not be the same in every locale, please check with your Yamaha dealer. * Die technischen Daten und Beschreibungen in dieser Bedienungsanleitung dienen nur der Information. Yamaha Corp. behlt sich das Recht vor, Produkte oder deren technische Daten jederzeit ohne vorherige Ankndigung zu verndern oder zu modizieren. Da die technischen Daten, das Gert selbst oder Sonderzubehr nicht in jedem Land gleich sind, setzen Sie sich im Zweifel bitte mit Ihrem Yamaha-Hndler in Verbindung. * Les caractristiques techniques et les descriptions du mode demploi ne sont donnes que pour information. Yamaha Corp. se rserve le droit de changer ou modier les produits et leurs caractristiques techniques tout moment sans aucun avis. Du fait que les caractristiques techniques, les quipements et les options peuvent diffrer dun pays lautre, adressez-vous au distributeur Yamaha le plus proche. * Las especicaciones y descripciones de este manual del propietario tienen slo el propsito de servir como informacin. Yamaha Corp. se reserva el derecho a efectuar cambios o modicaciones en los productos o especicaciones en cualquier momento sin previo aviso. Puesto que las especicaciones, equipos u opciones pueden no ser las mismas en todos los mercados, solicite informacin a su distribuidor Yamaha.

FCC INFORMATION (U.S.A.)

1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC authorization to use this product in the USA. 3. NOTE: This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class B digital devices. Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential environment will not result in harmful interference with other electronic devices. This equipment generates/ uses radio frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference harmful to the operation of other electronic devices. Compliance with FCC regulations does not guarantee that interference will not occur in all installations. If this product is found to be the source of interference, which can be determined by turning the unit OFF and ON, please try to eliminate the problem by using one of the following measures: Relocate either this product or the device that is being affected by the interference. Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line lter/s. In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to co-axial type cable. If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type of product. If you can not locate the appropriate retailer, please contact Yamaha Corporation of America, Electronic Service Division, 6600 Orangethorpe Ave, Buena Park, CA90620 The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries.

(class B)

* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA.

OBSERVERA!

Apparaten kopplas inte ur vxelstrmskllan (ntet) s lnge som den ar ansluten till vgguttaget, ven om sjlva apparaten har stngts av.
ADVARSEL: Netspendingen til dette apparat er IKKE afbrudt,
slenge netledningen siddr i en stikkontakt, som er t endt ogs selvom der or slukket p apparatets afbryder.
VAROITUS: Laitteen toisiopiiriin kytketty kyttkytkin ei irroita koko

laitetta verkosta.

(standby)
For details of products, please contact your nearest Yamaha representative or the authorized distributor listed below. Pour plus de dtails sur les produits, veuillez-vous adresser Yamaha ou au distributeur le plus proche de vous gurant dans la liste suivante.

Die Einzelheiten zu Produkten sind bei Ihrer unten aufgefhrten Niederlassung und bei Yamaha Vertragshndlern in den jeweiligen Bestimmungslndern erhltlich. Para detalles sobre productos, contacte su tienda Yamaha ms cercana o el distribuidor autorizado que se lista debajo.

NORTH AMERICA

CANADA
Yamaha Canada Music Ltd. 135 Milner Avenue, Scarborough, Ontario, M1S 3R1, Canada Tel: 416-298-1311
THE NETHERLANDS/ BELGIUM/LUXEMBOURG
Yamaha Music Central Europe GmbH, Branch Benelux Clarissenhof 5-b, 4133 AB Vianen, The Netherlands Tel: 0347-358 040
THE PEOPLES REPUBLIC OF CHINA
Yamaha Music & Electronics (China) Co.,Ltd. 25/F., United Plaza, 1468 Nanjing Road (West), Jingan, Shanghai, China Tel: 021-6247-2211

U.S.A.

Yamaha Corporation of America 6600 Orangethorpe Ave., Buena Park, Calif. 90620, U.S.A. Tel: 714-522-9011

FRANCE

Yamaha Musique France BP 70-77312 Marne-la-Valle Cedex 2, France Tel: 01-64-61-4000

HONG KONG

Tom Lee Music Co., Ltd. 11/F., Silvercord Tower 1, 30 Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: 2737-7688
Yamaha Musica Italia S.P.A. Viale Italia 88, 20020 Lainate (Milano), Italy Tel: 02-935-771

INDONESIA

PT. Yamaha Music Indonesia (Distributor) PT. Nusantik Gedung Yamaha Music Center, Jalan Jend. Gatot Subroto Kav. 4, Jakarta 12930, Indonesia Tel: 21-520-2577
CENTRAL & SOUTH AMERICA

MEXICO

Yamaha de Mxico S.A. de C.V. Calz. Javier Rojo Gmez #1149, Col. Guadalupe del Moral C.P. 09300, Mxico, D.F., Mxico Tel: 55-5804-0600

SPAIN/PORTUGAL

Yamaha-Hazen Msica, S.A. Ctra. de la Coruna km. 17, 200, 28230 Las Rozas (Madrid), Spain Tel: 91-639-8888
Yamaha Music Korea Ltd. Tong-Yang Securities Bldg. 16F 23-8 Yoido-dong, Youngdungpo-ku, Seoul, Korea Tel: 02-3770-0660

BRAZIL

Yamaha Musical do Brasil Ltda. Av. Reboucas 2636-Pinheiros CEP: 05402-400 Sao Paulo-SP. Brasil Tel: 011-3085-1377

GREECE

Philippos Nakas S.A. The Music House 147 Skiathou Street, 112-55 Athens, Greece Tel: 01-228 2160

MALAYSIA

Yamaha Music Malaysia, Sdn., Bhd. Lot 8, Jalan Perbandaran, 47301 Kelana Jaya, Petaling Jaya, Selangor, Malaysia Tel: 3-78030900

SWEDEN

Yamaha Scandinavia AB J. A. Wettergrens Gata 1 Box 30053 S-Gteborg, Sweden Tel: 34 00

ARGENTINA

Yamaha Music Latin America, S.A. Sucursal de Argentina Viamonte 1145 Piso2-B 1053, Buenos Aires, Argentina Tel: 1-4371-7021

PHILIPPINES

Yupangco Music Corporation 339 Gil J. Puyat Avenue, P.O. Box 885 MCPO, Makati, Metro Manila, Philippines Tel: 819-7551

DENMARK

YS Copenhagen Liaison Ofce Generatorvej 6A DK-2730 Herlev, Denmark Tel: 49 00
PANAMA AND OTHER LATIN AMERICAN COUNTRIES/ CARIBBEAN COUNTRIES
Yamaha Music Latin America, S.A. Torre Banco General, Piso 7, Urbanizacin Marbella, Calle 47 y Aquilino de la Guardia, Ciudad de Panam, Panam Tel: +507-269-5311

SINGAPORE

Yamaha Music Asia Pte., Ltd. #03-11 A-Z Building 140 Paya Lebor Road, Singapore 409015 Tel: 747-4374

FINLAND

F-Musiikki Oy Kluuvikatu 6, P.O. Box 260, SF-00101 Helsinki, Finland Tel: 09 618511

TAIWAN

Yamaha KHS Music Co., Ltd. 3F, #6, Sec.2, Nan Jing E. Rd. Taipei. Taiwan 104, R.O.C. Tel: 02-2511-8688

EUROPE

THE UNITED KINGDOM
Yamaha-Kemble Music (U.K.) Ltd. Sherbourne Drive, Tilbrook, Milton Keynes, MK7 8BL, England Tel: 01908-366700

NORWAY

Norsk lial av Yamaha Scandinavia AB Grini Nringspark 1 N-1345 sters, Norway Tel: 77 70

THAILAND

Siam Music Yamaha Co., Ltd. 891/1 Siam Motors Building, 15-16 oor Rama 1 road, Wangmai, Pathumwan Bangkok 10330, Thailand Tel: 02-215-2626

ICELAND

Skifan HF Skeifan 17 P.O. Box 8120 IS-128 Reykjavik, Iceland Tel: 525 5000

IRELAND

Danfay Ltd. 61D, Sallynoggin Road, Dun Laoghaire, Co. Dublin Tel: 01-2859177

OTHER ASIAN COUNTRIES

Yamaha Corporation, Asia-Pacic Music Marketing Group Nakazawa-cho 10-1, Hamamatsu, Japan 430-8650 Tel: +81-53-460-2317

GERMANY

Yamaha Music Central Europe GmbH Siemensstrae 22-34, 25462 Rellingen, Germany Tel: 04101-3030

OTHER EUROPEAN COUNTRIES

Yamaha Music Central Europe GmbH Siemensstrae 22-34, 25462 Rellingen, Germany Tel: +49-4101-3030
SWITZERLAND/LIECHTENSTEIN
Yamaha Music Central Europe GmbH, Branch Switzerland Seefeldstrasse 94, 8008 Zrich, Switzerland Tel: 01-383 3990

AFRICA

Yamaha Corporation, Asia-Pacic Music Marketing Group Nakazawa-cho 10-1, Hamamatsu, Japan 430-8650 Tel: +81-53-460-2312

OCEANIA

AUSTRALIA
Yamaha Music Australia Pty. Ltd. Level 1, 99 Queensbridge Street, Southbank, Victoria 3006, Australia Tel: 3-9693-5111

AUSTRIA

Yamaha Music Central Europe GmbH, Branch Austria Schleiergasse 20, A-1100 Wien, Austria Tel: 01-60203900

MIDDLE EAST

TURKEY/CYPRUS

NEW ZEALAND

Music Houses of N.Z. Ltd. 146/148 Captain Springs Road, Te Papapa, Auckland, New Zealand Tel: 9-634-0099