User s Manual

(English Edition)

CNPS7000B

* Please read before installation
http://www.zalman.co.kr http://www.zalmanusa.com

1. Features

1) Does not generate noise or vibration in Silent Mode. 2) Pure copper and/or pure aluminum base materials ensure excellent heat dissipation. 3) Intel Pentium 4 (Socket 478), AMD Duron / Athlon / Athlon XP (Socket 462), and Sempron / AMD64 (Socket 754/939/940) compatible design for broad compatibility. 4) 92mm fan inside the FHS maximizes airflow and makes installation easier. 5) Adjustable fan speed controller (FAM MATE 2) enables control of noise and fan performance. 6) Fan should be set to Normal Mode if OVERCLOCKING. 7) Zalman Tech Co., Ltd. is not responsible for any damage resulting from CPU OVERCLOCKING.

2. Specifications

1) Flower Heatsink (FHS)
Spec. Weight (g) T.R. Dimensions Dissipation Area Silent Mode Normal Mode Model CNPS7000B-AlCu CNPS7000B-Cu
2) Fan - Bearing Type : 2-Ball - Rotation Speed : 1,350rpm 10 % (Silent Mode) 2,400rpm 10 % (Normal Mode) - Noise Level : 20dB 10% (Silent Mode) - measured at 1m distance from noise source 25dB 10% (Normal Mode) - measured at 1m distance from noise source 3) FAN MATE 2 - Output Voltage : 5V ~ 11V 2 % - Allowable Power : 6W or lower Note 1)The maximum weight for a cooler is specified as 450g for Intel Socket 478 and AMD Socket 754/939/940 and 300g for AMD Socket 462. Special care should be taken when moving a computer equipped with a cooler which exceeds the relevant weight limit. Zalman is not responsible for any damage that occurs when moving a computer.

3. Exploded View

Fan Bolt Clip Fan Support

Fan Fixing Screw

Fan Support Fixing Screw

4. Patents

Korean Patent Application No. 00-54635 Korean Design Applications Nos. 02-17470, 02-25208, 02-25209, etc. Patent Applications pending in over 20 nations around the world, including USA, EU, and Japan

Precautions

1) If excessive force is exerted on the fan, it may malfunction and result in damage to the product and/or the computer. 2) Do not put your finger in the fan while it is running. 3) Keep the product away from children. 4) Check the components list and condition of the product before installing. If there is any problem, contact the shop where you purchased it and get a replacement or refund. 5) The exposed core of a Socket 462 CPU can be cracked if proper care is not taken. Read the Installation section thoroughly before installing. NOTICE) Zalman Tech Co., Ltd. is not responsible for any damages due to external causes, including improper use, problems with electrical power, accident, neglect, alteration, repair, improper installation, or improper testing.

5. Components

1) Common Components FHS Assembly (CNPS7000B-AlCu/Cu) Four (4) Bolts (for installing the FHS) Thermal Grease Fan Speed Controller (FAN MATE 2) Double - sided Tape (for installing FAN MATE 2) Cable for FAN MATE 2 Users Manual (in English and Korean) 2) Components for Intel Pentium 4 (Socket 478) Two (2) Clip Supports For Socket 478
3) Components for AMD Duron / Athlon / Athlon XP (Socket 462) One (1) A-Type (blue) Clip Support for Socket 462 One (1) B-Type (white) Clip Support for Socket 462 Four (4) Bolts (for fastening the Clip Supports) One (1) set of Washers
4) Components for AMD Sempron / AMD64 (Socket 754/939/940) Two (2) Nipples One (1) Backplate Big washers (from component )

6. Compatible CPUs

1) Intel Pentium 4 - Socket 478 All speeds of Pentium 4 Socket 478 CPUs up to 3.4GHz When using 3.4GHz Northwood CPU or Prescott CPUs of 2.8A/E GHz or faster, please refer to the following table to set the fan speed accordingly for sufficient cooling. < CNPS7000B Fan Speed Table >
CPU Cooler Northwood 3.4 Prescott 2.8A/E, 3.0E, 3.2E, 3.4E
2,500rpm or faster 2,200rpm or faster
Fan speed of 2,500rpm can be obtained by directly connecting 3-pin fan connector to motherboard. (Without Fan Controller)
Cautions ) As shown in Figure 2, a motherboard that is not compliant with the 10.2mm Motherboard component height restriction standard, introduced by Intel, may create interference between components and the clip. Please do not install the CNPS7000B if this interference is observed. No components higher than 39mm (possible examples : PSU, graphics card, RAM, etc.) should be present within a 55mm radius from the center of the CPU to install this product. For more information, please visit the Zalman website (http://www.zalman.co.kr) and click on Compatibility between CNPS7000(A/B) and Socket 478 Pentium 4 Motherboards link.
10.2mm Motherboard component height restriction Clip Motherboard Component

Top View

Top View Clip Motherboard Component

Figure 1 Compatible

Side View

Figure 2 Not Compatible

2) AMD Duron / Athlon / Athlon XP - Socket 462
All CPUs conforming to Socket 462 platform

Cautions )

This product requires Heatsink Attach Holes around the CPU socket as shown on the right. No components higher than 39mm (possible examples : PSU, graphics card, RAM, etc.) should be present within a 55mm radius from the center of the CPU to install this product. This product cannot be installed if any motherboard component (usually capacitor) taller than 15mm is located under the clip. For more information, please visit the Zalman website (http://www.zalman.co.kr) and refer to CNPS7000(A/B) Compatible Socket 462 Motherboards List link.
3) AMD Sempron / AMD64 - Socket 754/939/940
All CPUs conforming to Socket 754/939/940 platform
No components higher than 39mm (possible examples: PSU, graphics card, RAM, etc.) should be present within a 55mm radius from the center of the CPU to install this product. For more information, please visit the Zalman website (http://www.zalman.co.kr) and refer to CNPS7000(A/B) Compatible Socket 754/939/940 Motherboards List link.
7. Installation (Intel Pentium 4 - 478)

1) Apply Thermal Grease

CPU (IHS)
Clean off particles and residue and then spread the included thermal grease thinly and evenly over the CPU that touches the FHS surface.

Thermal Grease

2) Install Clip Supports for Socket 478

Retention Guide

Clip Support for Socket 478
Install the clip supports for socket 478 on both sides of the retention guide as shown on the right.

3) Insert Bolts

Insert the two bolts into the inner holes of the clip.

Inner Hole Clip

4) Place FHS
Set the FHS at the center of the CPU. Screw the bolts in slightly, and then tighten them in an alternating fashion until the clip supports are completely pressed against the clip.
Cilp Support for Socket 478
5) Supply Power (Connect FAN MATE 2)
Please refer to FAN MATE 2 Installation and Usage on page 7.
8. Installation (AMD Duron / Athlon / Athlon XP - 462)
1) Install Clip Supports for Socket 462
Install the clip supports for socket 462 on the motherboard. Make sure to place A-type (blue : installed near the lever) and B-type (white) supports at the appropriate location. The installation should be done in the order of : bolts > small washers > motherboard > small washers > clip supports (see below).

Clip Support B for Socket 462 (White) Clip Support A for Socket 462 (Blue) Lever

Small Washer

Motherboard Small Washer Bolt Clip Support B for Socket 462 (White)
2) Apply Thermal Grease Clean off particles and residue and then spread the included thermal grease thinly and evenly over the CPU core that touches the FHS surface.
3) Insert Bolts Insert the two bolts into the inner holes of the clip.
Cilp Support for Socket 462
9. Installation (AMD Sempron / AMD64 - 754/939/940)
1) Fasten Nipples Place a big washer on the motherboard. Then, put a nipple over it and fasten the nipple until the motherboard is firmly stuck to the backplate. * Retention Guide is not needed when installing CNPS7000B on Socket 754/939/940.
Nipple Motherboard Big Washer

Backplate

2) Apply Thermal Grease Clean off particles and residue and then spread the included thermal grease thinly and evenly over the CPU that touches the FHS surface.

CPU (Lid)

3) Insert Bolts Insert the two bolts into the outer holes of the clip.

Outer Hole Clip

Set the FHS at the center of the CPU. Screw the bolts in slightly, and then tighten them in an alternating fashion until the nipples are completely pressed against the clip.

FHS Nipple

FAN MATE 2 Installation and Usage
1) Installing FAN MATE 2 on the Inside of the System
Fan Connector (CNPS7000B)
2) Installing FAN MATE 2 on the Outside of the System

Double-sided Tape

FAN MATE 2

Motherboard

6-Pin Connector
Connect the appropriate 3-pin connector on the cable to the motherboard fan header and the CNPS7000Bs fan connector.
Pull the 6-pin connector out of the system through the back and connect it to FAN MATE 2, which should be installed on the case using the included double-sided tape.
When the speed control knob on FAN MATE 2 is turned fully counter-clockwise, the fan operates in Silent Mode. Turned fully clockwise, it operates in Normal Mode. You can select the desired fan speed by turning the knob. Note) FAN MATE 2 has been specifically designed for the fan of this product. Zalman Tech Co., Ltd. is not responsible for any damage to systems or CPUs caused by using it with other types of fans.

10. Notes on Usage

1) Checking CPU Compatibility Please refer to Compatible CPUs on page 3 to confirm that your CPU is compatible before using the CPU cooler. 2) Cautions During Booting When booting the computer, it may automatically power down after an alarm sound by a system monitoring program to indicate that the the CPU fan is rotating slowly. If this happens, turn the speed control knob fully clockwise to increase the fan speed. Then set CPU Fan Detected to Disabled in the BIOS settings, or set the slowest rotational speed of the CPU fan in the system monitoring program to less than or equal to 1,300rpm.
Note) Some motherboards do not boot if the rotational speed of the CPU fan is below a certain rpm. If the BIOS settings are updated, Silent Mode can be used. For more information on updating your BIOS, please refer to your motherboard manufacturer's website. Disabling CPU fan speed detection in BIOS settings does not affect computer performance.

11. Thermal Resistance (

) & Noise (dB) Curve
12. Zalman Noise Prevention System
When building a noiseless computer, use Zalmans Noiseless Power Supply, Noiseless Case Fan, Fanless Northbridge Cooler, Heatpipe HDD Cooler, Heatpipe VGA Cooler, and Fan Controller to achieve stable performance and maintain a noiseless environment.

FANS ZALMAN (www.zalmanusa.com) ZALMAN CNPS3100+ PURE COPPER CPU COOLER ZALMAN CNPS5100-CU CPU COOLER ZALMAN 5700D-CU CPU COOLER ZALMAN CNPS6000CU PURE COPPER CPU COOLER ZALMAN CNPS6000-ALCU CPU COOLER ZALMAN CNPS7000-ALCU CPU COOLER ZALMAN CNPS7000-CU PURE COPPER CPUCOOLER ZALMAN ZM80D-HP DUAL HEATPIPE VGA COOLER ZALMAN ZM-MFC1 6-FAN SPEED CONTROLLER ZALMAN ZM-OP1 80MM FAN W/GRILL F/ZM80CHP ZALMAN FB123 92MM FAN W/BRACKET ZALMAN CNPS7000B-ALCU CPU COOLER ZALMAN CNPS7000B-CU CPU COOLER ZALMAN CNPS7700-ALCU CPU COOLER ZALMAN CNPS7700-CU CPU COOLER ZALMAN CNPS7000BLED-ALCU CPU COOLER ZALMAN CNPS7000BLED-CU CPU COOLER ZALMAN 9500LED CPU COOLER ZALMAN CNPS9500AM2 CPU COOLER FOR AM2 ZALMAN FATAL1TY FS-CS77 CPU COOLER ZALMAN FATAL1TY FS-V7 ZALMAN ZM-STG1 SUPER THERMAL GREASE 3.5G Other models available ThermalTake (www.thermaltake.com) THERMALTAKE A2140 5.25" DRIVE XCONTROL THERMALTAKE A1254 VOL.7+ P4-478 THERMALTAKE SONICTOWER CPU FAN CL-P0071 THERMALTAKE BIG WATER 12CM CLW0005 THERMALTAKE TT SILVENT TOWER CLP0024 THERMALTAKE TT BEETLE CL-P0086 THERMALTAKE TT TR2 CPU FAN A4004 THERMALTAKE 8CM MULTI COL CASE FAN A1971 THERMALTAKE 12CM MUTLI COL FAN A1973 THERMALTAKE 6025 CASE FAN 60MM THERMALTAKE 12CM BLUE A1926
1501Z03001 1501Z03011 1501Z03008 1501Z03002 1501Z03010 1501Z03004 1501Z03005 1505Z03003 1506Z03001 1506Z03002 1508Z03001 1501Z03013 1501Z03014 1501Z03015 1501Z03016 1501Z03017 1501Z03018 1501Z03020 1501Z03024 1501Z03021 1501Z03022 1506Z03005
1308T07005 1501T07001 1501T07026 1501T07027 1501T07028 1501T07029 1501T07030 1502T07002 1502T07003 1502T07004 1502T07005
1502T07006 1502T07007 1502T07008 1502T07010 1502T07015 1506T07002 1506T07006 1506T07007 1506T07010 1506T07011 1506T07012 1508T07001 1508T07003 1706T07001 1590T0700002 SPEAKERS
THERMALTAKE 8CM BLUE A1910 THERMALTAKE TT9025 90MM CASE FAN THERMALTAKE TT8025 80MM CASE FAN THERMALTAKE A1280 120MM CASE FAN THERMALTAKE A2364 80MM CASE FAN X4 THERMALTAKE DRIVE BAY FAN A2259 THERMALTAKE CL-W0032 FLOW INDICATOR THERMALTAKE CL-W0021 ACQUA BAY M2 FAN THERMALTAKE CL-W0011 FANLESS LIQUID COOL THERMALTAKE CL-W0020 EXT. LIQUID COOL THERMALTAKE CL-W0040 EXT. LIQUID COOL THERMALTAKE NOTEBOOK COOLER CLO0004 THERMALTAKE R15ON01 NB COOLER BLACK THERMALTAKE HARDCANO13 DR BAY KITA2259 THERMALTAKE CL-P0508 CPU COOLER Other models available CYBER ACOUSTICS ( www.cyberacoustics.com )
3701C14001 3701C14002 3701C14003 3701C14005 3702C14003 3702C14004 3702C14005 3702C14007 3702C14009 3703C14002 3703C14003 3703C14005 3703C14006 3703C14007 3703C14008
CYBER ACOUSTIC CA-2022 SPK BULK CYBER ACOUSTIC CA-1000 DRIVE BAY SPKS CYBER ACOUSTIC CA-1000 DRIVE BAY SPK BK CYBER ACOUSTIC CA-2100 SPK BLACK CYBER ACOUSTIC CA2015WW 2PCS WHITE USB CYBER ACOUSTIC CA-2012 SPK WHITE BULK CYBER ACOUSTIC CA-2014 SPK BLACK BULK CYBER ACOUSTIC CA-3001 SPK BLACK CYBER ACOUSTIC CA-2016WB BLACK 2PCS USB CYBER ACOUSTIC CA-3000 3PCS SPEAKERS CYBER ACOUSTIC CA-3090 3PCS SPEAKERS ACOUSTIC AUTHORITY A-3780 3PCS SPEAKERS CYBER ACOUSTIC CA4400RB BLACK 5PCS SUBW CYBER ACOUSTIC A3640RB SILVER 3PCS SUBW CYBER ACOUSTIC A5640RB SILVER 6PCS SUBW
3705C14001 3700C1400001 3707C14001 3707C14002 3707C14003 3707C14004 3707C14006 3707C14007 4301C14005 3702L09018 3703L09014 3703L09021 3790L0900001 3702L09022
CYBER ACOUSTIC CA-5001 5.1 SPK BLACK CYBER ACOUSTIC PLATINUM CA-5648 6PC SPK CYBER ACOUSTIC STEREO HEAD PHONE ACM-70 CYBER ACOUSTIC AC200B BLACK HDSET/MIC CYBER ACOUSTIC AC401 SILVER HDSET/MIC CYBER ACOUSTIC AC960 BLACK HDSET/MIC CYBER ACOUSTICS AC-101 SILVER HDSET/MIC CYBER ACOUSTIC AC-100B BLACK HDSET/MIC CYBER ACOUSTIC AC840 USB MONO HEADSET LOGITECH S220 SPEAKER SYSTEM 980000023 LOGITECH Z4 PC MULTIMEDIA SPK SYSTEM 40W LOGITECH LS21 2.1 SPK SYS 980-000058 LOGITECH S150 DIGITAL USB SPEAKERS LOGITECH LS11 STEREO SPK 980000048