132999480gb

4-10-2000

Pagina 1

WASHING MACHINE AUTOMATICK PRAKA AUTOMATICK PRKA AUTOMATA MOSGP FJE 1005

FJE 1005

95C 60C 40C 30C

700 500

132999480
INSTRUCTION BOOKLET NVOD K OBSLUZE NVOD NA OBSLUHU HASZNLATI TMUTAT

CZ SK H

Pagina 2

Dear customer,

Please read these operating instructions carefully and pay particular attention to the safety notes indicated in the first pages. We recommend that you keep this instruction booklet for future reference and pass it on to any future owners.

Transport damages

When unpacking the appliance, check that it is not damaged. If in doubt, do not use it and contact the Service Centre.
The symbols you will see on some paragraphs of this booklet have the following meaning: The warning triangle and/or the key words (Warning!, Caution!) emphasize information that is particularly important for your safety or correct functioning of the appliance. The information marked with this symbol provides additional instructions and practical tips on the use of the appliance. Tips and information about economical and ecological use of the machine are marked with this symbol.
Our contribution to the protection of the environment: we use environmentally friendly paper.

Pagina 3

Contents
Warnings Disposal 4-Maintenance
Door seal Bodywork Detergent dispenser drawer Drain filter Water inlet filter Emergency emptying out Frost precautions
Tips for environmental protection 5 Technical specifications Installation
Unpacking Positioning Water inlet Water drainage Electrical connection

Something not working?

Your new washing machine Description of the appliance
Door locked pilot light Detergent dispenser drawer
Control panel Controls Washing hints Sorting the laundry Temperatures Before loading the laundry Maximum loads Laundry weights Removing stains Detergents and additives International wash code symbols Operating sequence Washing programmes

10 10-16-18 19

ENGLISH

Pagina 4

Warnings
The following warnings are provided in the interests of overall safety. You must read them carefully before installing or using the appliance.

Installation

All internal packing must be removed before using the appliance. Serious damage may be caused to the machine or adjacent furniture if the protective transit devices are not removed or are not completely removed. Refer to the relevant paragraph in the instruction book. Any electrical work required to install this appliance must be carried out by a qualified electrician. Any plumbing work required to install this appliance must be carried out by a qualified plumber. After having installed the machine, check that it is not standing on its electrical supply cable. If the appliance is placed on a carpeted floor, ensure that air can circulate freely between the feet and the floor.
Use only the recommended quantities of fabric softener. An excessive amount could damage the laundry. Leave the porthole door slightly ajar when the appliance is not in use. This preserves the door seal and prevents the formation of musty smells. Always check that water has emptied out before opening the door. If not, drain the water following the instructions in the instruction book. Always unplug the appliance and shut the water tap after use.

General safety

Repairs to the machine must be carried out only by qualified personnel. Repairs carried out by inexperienced persons could cause serious danger. Contact your local Service Centre. Never pull the power supply cable to remove the plug from the socket; always take hold of the plug itself. During high temperature wash programmes the door glass may get hot. Do not touch it!
This appliance is designed for domestic use. It must not be used for purposes other than those for which it was designed. Only wash fabrics which are designed to be machine washed. Follow the instructions on each garment label. Do not overload the appliance. Follow the instructions in the instruction book. Make sure that all pockets are empty. Objects such as coins, safety pins, pins and screws can cause extensive damage. Do not machine wash garments saturated with petroleum, methylated spirits, trichlorethylene, etc. If such fluids have been used to remove stains prior to washing, wait until they have completely evaporated from the fabric before placing garments in the appliance. Place small items such as socks, belts, etc. in a cloth bag or pillowcase to prevent them getting trapped between the drum and the tub.

This appliance complies with the following EEC Directives: 73/23/EEC of 19/02/73 relating to low voltage 89/336/EEC of 03/05/89 relating to electromagnetic compatibility.

Pagina 7

Unpacking
All transit bolts and packing must be removed before using the appliance. You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again. 1. Using a spanner, unscrew and remove the rear right-hand bolt and lay the machine on its back, taking care not to squash the hoses. This can be avoided by placing one of the corner packing pieces between the machine and the floor.

Positioning

Install the machine on a flat hard floor. Make sure that air circulation around the machine is not impeded by carpets, rugs etc. Check that the machine does not touch the wall or other kitchen units. Carefully level by screwing the adjustable feet in or out. Never place cardboard, wood or similar materials under the machine to compensate for any unevenness in the floor.

Water inlet

Connect the water inlet hose to a tap with a 3/4" thread. The other end of the inlet hose which connects to the machine can be turned in any direction. Simply loosen the fitting, rotate the hose and retighten the fitting, making sure there are no water leaks
2. Remove the polystyrene block from the underside of the machine and release the two plastic bags. 3. Carefully remove the right-hand bag (1) then the left-hand bag (2) by pulling them towards the centre of the machine.
4. Set the machine upright and remove the two remaining bolts from the back. 5. Pull out the three plastic spacers from the holes into which the bolts were fitted. 6. Plug the open holes with the plugs which you will find in the envelope containing the instruction booklet.
The inlet hose must not be lengthened. If it is too short and you do not wish to move the tap, you will have to purchase a new, longer hose specially designed for this type of use.

Pagina 8

Water drainage
The end of the drain hose can be positioned in three ways: Hooked over the edge of a sink using the plastic hose guide supplied with the machine. In this case, make sure the end cannot come unhooked when the machine is emptying. This could be done by tying it to the tap with a piece of string or attaching it to the wall.

Electrical connection

This machine is designed to operate on a 220-230 V, single-phase, 50 Hz supply. Check that your domestic electrical installation can take the maximum load required (2.2 kW), also taking into account any other appliances in use. Connect the machine to an earthed socket. The manufacturer declines any responsibility for damage or injury through failure to comply with the above safety precaution. Should the appliance power supply cable need to be replaced, this should be carried out by our Service Centre. The power supply cable must be easily accessible after installing the machine.
In a sink drain pipe branch. This branch must be above the trap so that the bend is at least 60 cm above the ground. Directly into a drain pipe at a height of not less than 60 cm and not more than 90 cm. The end of the drain hose must always be ventilated, i.e. the inside diameter of the drain pipe must be larger than the outside diameter of the drain hose. The drain hose must not be kinked. Run it along the floor; only the part near the drainage point must be raised.

Pagina 9

Your new washing machine
This new washing machine, which is fitted with the Jet system, patented Zanussi, meets all modern needs for effective treatment of laundry with low water, energy and detergent consumption. Further savings are achieved by washing small loads of laundry, since water and electricity consumption is proportional to the quantity and type of laundry being washed. The possibility of selecting the temperature, spin speed and all the options offered by this washing machine gives you truly customised washing. The programme progress display shows the programme steps selected and the programme phase which is running. The special wool programme with its new delicate wash system treats your woollens with extreme care. The balance control device ensures the machine is stable during the spin.
Description of the appliance
1 Detergent dispenser drawer 2 Control panel 3 Door locked pilot light
4 Drain filter 5 Adjustable feet

Door locked pilot light

It stays on during the whole programme indicating that the door is locked. When the light goes out, the door can be opened (see page 18).

Detergent dispenser drawer
Prewash Main wash Fabric softener, starch

Pagina 10

Control panel

1 ON/OFF button

Press this button to switch the washing machine on. Press the ON/OFF button again to switch the machine off.

4 TEMPERATURE button

Press this button repeatedly to increase or decrease the temperature, if you want your laundry to be washed at a temperature different from the one proposed by the washing machine. The relevant light will light up. Maximum temperatures are 95C for cotton, 60C for synthetic fabrics, 40C for delicate fabrics, wool and fabrics to be hand-washed (HAND WASH programme). Important! By depressing TEMPERATURE and SPIN SPEED buttons simultaneously, the acoustic signal at the end of the cycle is suppressed.

2 MAINS-ON light

This light is connected to the ON/OFF button. It lights up when you press the button, and goes out when you press it again.

3 FABRIC button

Press this button repeatedly to select the programme on the basis of the type of laundry to be washed. The light relevant to the selected programme will light up. The washing machine will propose a temperature and automatically select the maximum spin value provided for the programme you have chosen. You can change these values by operating buttons 4 and 5. Hand wash When you select this programme, you obtain a particularly delicate washing, suitable for articles of clothing whose label indicates that they must be hand-washed.

5 SPIN SPEED button

Press this button repeatedly to change the spin speed, if you want your laundry to be spun at a speed different from the one proposed by the washing machine. The relevant light will light up. Maximum speeds are: for cotton: 1,000 rpm; for synthetic fabrics, wool, and fabrics to be handwashed: 900 rpm; for delicate fabrics: 700 rpm. RINSE HOLD position : when you choose this option, the machine will not drain the water of the last rinse, so as not to wrinkle the laundry. At the end of the cycle, the light of the START/PAUSE button will flash and the light will remain lit, to indicate that the water must be drained. To complete the cycle, choose one of the following options:

Pagina 11

Draining and spin: - Press the START/PAUSE button. The machine will drain the water, then spin the laundry at the maximum speed provided for the selected programme. - Select spin speed by means of button 5, and press the START/PAUSE button. Drain only - Press the SKIP/RESET button (9) once, so as to cause the DRAIN light to light up, then press the START/PAUSE button. Important! If you accidentally press the SKIP/RESET button more than once, the memory will be cleared. To drain the water, select any washing programme by means of the FABRIC button, then press SKIP/RESET three times in order to select the DRAIN position (only the DRAIN light will remain lit).

8 START/PAUSE button

This button has three functions: Start: after you have selected the desired programme and options, press this button to start the washing machine. The light above the button will stop flashing and remain lit. Pause: when you press this button again, the programme in progress is interrupted. The light above the button will start flashing. To restart the programme, press the button again. When you PAUSE the cycle, the DOOR LOCKED light goes out, and it becomes possible to open the door, provided the washing machine is not in the heating phase; the level of the water is not high; the drum is not turning. Important! You must set the washing machine to PAUSE before you make any change in the programme in progress. Draining of water and spinning after the execution of programmes with the RINSE HOLD option.

6-7 OPTIONS buttons

Press these buttons to select the following options: PREWASH : select this option if you wish your laundry to be prewashed before the main wash (not available for wool and hand-wash cycle). The prewash ends with a short spin in programmes for cotton and synthetic fabrics, whereas in the programme for delicate fabrics the water is only drained. SUPER RINSE : this option can be selected with all programmes except the wool programme and hand wash. The machine performs 4 rinses instead of 3. This option is recommended for people who are allergic to detergents, and in areas where the water is very soft. QUICK WASH : for laundry that is only slightly soiled (not for wool and HAND WASH programme). The washing time will be reduced according to the type of fabric and the selected temperature.

9 SKIP/RESET button

At the end of a programme, you must press this button once or repeatedly, in order to clear the contents of the memory (all the lights must be off); otherwise, the next time you switch the washing machine on, the audible warning signals relevant to the end of the previous cycle will be given. You can also press the RESET button to exclude one or several phases of the programme which is running, as indicated below. - set the washing machine to PAUSE by pressing the START/PAUSE button (the relevant light will flash); - press the RESET button once or several times, until the required phase(s) is(are) cancelled (the light next to the name of the phase(s) will go out). Example: In this case, the spin (at the speed provided for the selected type of fabric) will be performed.

Pagina 12

This button allows you also to select special programmes, such as RINSES , SPIN DRAIN.
10 Programme phase indicator lights
When you select a programme, the lights relevant to the phases that form the programme light up.
PREWASH WASH RINSES RINSE HOLD SPIN DRAIN FILTER END
If the machine is already switched on because it has just performed a washing programme, proceed as follows: - depress RESET once or repeatidly to cancel the previously performed programme (all the lights must be off); - select the type of fabric by means of the relevant button; - select the special programme: RINSES and SPIN Depress RESET once, the pilot light WASH goes out. SPIN Depress RESET twice, the pilot lights WASH and RINSES go out. DRAIN Depress RESET three times, the pilot lights WASH , RINSES and SPIN go out. Example: In this case the machine will perform the rinses and spin.
After you have started the programme, only the light relevant to the phase that is currently being carried out will remain lit. At the end of the programme the pilot light illuminates. If the light lights up at the end of the programme this means that the drain filter is clogged. The END pilot light flashes in the event of operating problems. At the same time one of the following lights starts to flash: = the machine does not fill = the machine does not empty = the door has not been closed To eliminate the problem, see paragraph Something not working.
If the machine is switched off: - depress ON/OFF button to switch it on; - select the type of fabric by means of button FABRIC: - select the special programme as previously described.

Pagina 13

Washing hints

Sorting the laundry

Follow the wash code symbols on each garment label and the manufacturers washing instructions. Sort the laundry as follows: whites, coloureds, synthetics, delicates, woollens.

Laundry weights

The following weights are indicative: bathrobe napkin quilt cover sheet pillow case tablecloth towelling towel tea cloth night dress ladies briefs mans work shirt mans shirt mans pyjamas blouse mens underpants 1200 g 100 g 700 g 500 g 200 g 250 g 200 g 100 g 200 g 100 g 600 g 200 g 500 g 100 g 100 g

Temperatures

for normally soiled white cottons and linen (e.g. tea cloths, towels, tablecloths, sheets.) for normally soiled, colour fast garments (e.g. shirts, night dresses, pyjamas.) in linen, cotton or synthetic fibres and for lightly soiled white cotton (e.g. underwear).
(cold)for delicate items (e.g. net curtains), mixed 30-40 laundry including synthetic fibres and woollens.
Before loading the laundry
Never wash whites and coloureds together. Whites may lose their whiteness in the wash. New coloured items may run in the first wash; they should therefore be washed separately the first time. Make sure that no metal objects are left in the laundry (e.g. hair clips, safety pins, pins). Button up pillowcases, close zip fasteners, hooks and poppers. Tie any belts or long tapes. Remove persistent stains before washing. Rub particularly soiled areas with a special detergent or detergent paste. Treat curtains with special care. Remove hooks or tie them up in a bag or net.

Removing stains

Stubborn stains may not be removed by just water and detergent. It is therefore advisable to treat them prior to washing. Blood: treat fresh stains with cold water. For dried stains, soak overnight in water with a special detergent then rub in the soap and water. Oil based paint: moisten with benzine stain remover, lay the garment on a soft cloth and dab the stain; treat several times. Dried grease stains: moisten with turpentine, lay the garment on a soft surface and dab the stain with the fingertips and a cotton cloth. Rust: oxalic acid dissolved in hot water or a rust removing product used cold. Be careful with rust stains which are not recent since the cellulose structure will already have been damaged and the fabric tends to hole. Mould stains: treat with bleach, rinse well (whites and fast coloureds only). Grass: soap lightly and treat with bleach (whites and fast coloureds only). Ball point pen and glue: moisten with acetone (*), lay the garment on a soft cloth and dab the stain. Lipstick: moisten with acetone as above, then treat stains with methylated spirits. Remove any residual marks from white fabrics with bleach. Red wine: soak in water and detergent, rinse and treat with acetic or citric acid, then rinse. Treat any residual marks with bleach. 13

Maximum loads

Recommended loads are indicated in the programme charts. General rules: Cotton, linen: drum full but not too tightly packed; Synthetics: drum no more than half full; Delicate fabrics and woollens: drum no more than one third full. Washing a maximum load makes the most efficient use of water and energy. For heavily soiled laundry, reduce the load size.

Pagina 14

Ink: depending on the type of ink, moisten the fabric first with acetone (*), then with acetic acid; treat any residual marks on white fabrics with bleach and then rinse thoroughly. Tar stains: first treat with stain remover, methylated spirits or benzine, then rub with detergent paste. (*) do not use acetone on artificial silk.
Quantity of detergent to be used

German dH French T.H.

soft medium hard very hard

0- 7 8-14 15-21

0-15 16-25 26-37
more than more than 21 37

Pagina 15

International wash code symbols
These symbols appear on fabric labels, in order to help you choose the best way to treat your laundry.

Energetic wash

Max. wash temperature 95C Delicate wash
Max. wash temperature 60C
Max. wash temperature 40C
Max. wash temperature 30C Hand wash

Do not wash at all

Bleaching

Bleach in cold water

Do not bleach

Ironing

Hot iron max 200C

Warm iron max 150C

Lukewarm iron max 110C

Do not iron

Dry cleaning Dry cleaning in all solvents
Dry cleaning in perchlorethylene, petrol, pure alcohol, R 111 & R 113
Dry cleaning in petrol, pure alcohol and R 113 Do not dry clean
high temperature low temperature Drying Flat On the line On clothes hanger Tumble dry Do not tumble dry

Pagina 16

Operating sequence
Before washing your first load of laundry, we recommend that you run a cotton cycle at 60C, with the machine empty, in order to remove any manufacturing residue from the drum and tub. Pour half a measure of detergent into the main wash compartment and start up the machine.

4. Switch the machine on

Press the ON/OFF button to switch the machine on. The light above the button will light up.
1. Place the laundry in the drum
Open the door. Place the laundry in the drum, one item at a time, shaking them out as much as possible. Close the door.
5. Select the desired programme/ fabric
Press the FABRIC button repeatedly, in order to select the desired programme/fabric. The relevant light will light up. The lights relevant to the phases that form the programme will light up. The START/PAUSE button light will start flashing.
2. Measure out the detergent
Pull out the dispenser drawer until it stops. Measure out the amount of detergent recommended by the manufacturer in a graduated cup and pour it into the main wash compartment. If you wish to carry out the prewash, pour detergent into the appropriate compartment marked.
6. Select the temperature
Press the TEMPERATURE button if you wish to select a temperature value different from the one proposed by the washing machine. The relevant light will light up.
3. Measure out the additive
If required, pour fabric softener into the compartment marked , without exceeding the MAX mark.

Pagina 17

7. Select the spin speed or the RINSE HOLD option
Press the SPIN SPEED button repeatedly, in order to select the desired spin speed or the RINSE HOLD option. The relevant light will light up. If you select the RINSE HOLD option, the machine will stop at the end of the programme with the water still in the tub.

13. How to open the door during the cycle of a programme
You can open the door, after having set the washing machine to PAUSE, provided the following conditions exist: the washing machine is not in the heating phase beyond 40C; the level of the water is not high; the drum is not turning. If these requirements are met, when you pause the washing machine, the DOOR LOCKED light goes out and the door can be opened. Should it not be possible to open the door, and should it be absolutely necessary to do so, switch the machine off by pressing the ON/OFF button. After approximately 2 minutes, you can open the door. Pay attention to the level and temperature of the water in the washing machine! When you close the door and press the ON/OFF button again, the washing machine will resume the programme from the point where it had been interrupted.

Pagina 19

Washing programmes
Type of laundry and symbols on labels

Max load 5.5 kg

Programme/ temperature
Description of Available options programme Main wash at 60-95C 3 rinses Long spin SPIN SPEED RINSE HOLD PREWASH SUPER RINSE QUICK
Consumption* Energy kWh 1.9 Water litres 47 Time h/min. 2.28
White cotton: e.g. sheets, tablecloths, household linen

60-95C

5.5 kg
Coloured cotton: e.g. shirts, blouses, underwear, towels, household linen
Main wash at 60-40-30C 60-40-30C 3 rinses Long spin
SPIN SPEED RINSE HOLD PREWASH SUPER RINSE QUICK

2.5 kg

Synthetic fabrics and blends: e.g. shirts, blouses, underwear
Main wash at 60-40-30C 60-40-30 or cold wash or 3 rinses Short spin

2.5 kg 40-30C or

Delicate fabrics: e.g. acrylic fabrics, viscose, polyester, synthetic blends
Main wash at 40-30C or cold wash 3 rinses Short spin

2 kg 40-30C or

Main wash at 40-30C or cold wash 3 rinses Short spin Main wash at 30C or cold wash 3 rinses Short spin

SPIN SPEED RINSE HOLD

2 kg 30C or
The consumption data shown on this chart is to be considered purely indicative, as it may vary depending on the quantity and type of laundry, on the inlet water temperature and on the ambient temperature. It refers to the highest temperature for each wash programme. For cotton items it refers to a wash load of 5 kg.

Pagina 20

Maintenance

1. Door seal

Check from time to time the door seal and eliminate eventual possible objects that could be trapped in the fold. Detergent can also accumulate inside the drawer recess: clean it with an old toothbrush. Refit the drawer after cleaning.
4. Drain filter 2. Bodywork
Clean the outside of the machine with warm water and a neutral, non-abrasive household detergent. Rinse with clean water and dry with a soft cloth. Important: do not use methylated spirits, solvents or similar products to clean the bodywork. The drain filter collects threads and small objects inadvertently left in the laundry. Check regularly that the filter is clean. Open the filter door. Place a container under the filter to catch any spillage. Unscrew the filter and remove it.

3. Detergent dispenser drawer
After a while, detergents and fabric softeners leave deposits in the drawer. Clean the drawer from time to time by rinsing it under a running tap. To remove the drawer from the machine, press the button in the rear left-hand corner. To facilitate cleaning, the top part of the additive compartment can be removed.
Clean the filter under a running tap, then refit it, screwing it fully in.

Pagina 21

5. Water inlet filter
If you notice that the machine is taking longer to fill, check that the filter in the water inlet hose is not blocked. Turn off the water tap. Unscrew the hose from the tap. Clean the filter with a stiff brush. Screw the hose back onto the tap.
6. Emergency emptying out
If the machine is unable to drain, proceed as follows to empty out the machine: Pull out the plug from the power socket. Close the water tap. If necessary, wait until the water has cooled down. Place a bowl on the floor. Put the drain hose end into the bowl and let the water come out.
7. The dangers of freezing
If the machine is exposed to temperatures below 0C, certain precautions should be taken. Turn off the water tap. Unscrew the inlet hose. Unhook the drain hose from the rear support and position the end of this hose and that of the inlet hose in a bowl. Run the draining programme. To do this: Switch the machine on Select a washing programme Press the RESET button three times Press START/PAUSE button Disconnect the appliance. Screw the inlet hose and reposition the drain hose. When you inted to start the machine up again, make sure that the room temperature is above 0C. 21

Pagina 22

Problems which you can resolve yourself. During machine operation it is possible that the light the following lights start to flash: : problem with the water supply : problem with water draining : door open Once the problem has been eliminated, press the START/PAUSE button all checks, the problem persists, contact your local Service Centre. to restart the programme. If after , the light of the START/PAUSE button and one of

Problem

The machine does not start up:

Possible cause

The door is not firmly closed. The machine is not plugged in or there is no power at the socket. The main fuse has blown. The START/PAUSE button has not been depressed. The water tap is closed. The inlet hose is squashed or kinked. The filter in the inlet hose is blocked. The door is not properly closed.
The machine does not fill:
The machine fills then empties immediately: The machine does not empty and/or does not spin: There is water on the floor:

The end of the drain hose is too low. Refer to relevant paragraph in water drainage section. The drain hose is squashed or kinked. The RINSE HOLD option has been selected. The drain filter is clogged. Too much detergent or unsuitable detergent (creates too much foam) has been used. Check whether there are any leaks from one of the inlet hose fittings. It is not always easy to see this as the water runs down the hose; check to see if it is damp. The drain hose is damaged. Too little detergent or unsuitable detergent has been used. Stubborn stains have not been treated prior to washing. The correct temperature was not selected. Excessive laundry load. The transit bolts and packing have not been removed. The support feet have not been adjusted. The laundry is not evenly distributed in the drum. Maybe there is very little laundry in the drum.
Unsatisfactory washing results:
The machine vibrates or is noisy:

Pagina 23

The door will not open:
The water level is above the bottom edge of the door. The machine is heating the water. The drum is turning. The door can only be opened when the relevant light has gone out. The electronic unbalance detection device has cut in because the laundry is not evenly distributed in the drum. The laundry is redistributed by reverse rotation of the drum. This may happen several times before the unbalance disappears and normal spinning can resume. If, after 6 minutes, the laundry is still not evenly distributed in the drum, the machine will spin at a lower speed. If at the end of the programme the laundry is not spun enough, redistribute the load manually and select the spin programme. The machine, which is the result of modern technology, runs in a very economical way with low water consumption. Performance is nevertheless excellent. The machine is fitted with a commutator motor which improves machine performance.
Spinning starts late or the laundry is not spun enough:
Water is not visible in the machine: The machine makes an unusual noise:
If you are unable to identify or solve the problem, contact our service centre. Before telephoning, make a note of the model, serial number and purchase date of your machine: the Service Centre will require this information.

Mod.. Ser.

Mod.. Prod. No.

Ser. No.

132999480cz

Pagina 24

Vzen zkaznci,
prosme vs, abyste si pozorn precetli tento nvod a zamrili svou pozornost predevsm na bezpecnostn predpisy uveden na prvnch strnkch. Doporucujeme nvod uschovat, abyste do nho mohli nahldnout i kdykoli v budoucnosti, a eventuln ho predat novmu majiteli v prpad prodeje tohoto spotrebice.

A kerek ablak nem nylik ki:

A dobban nem lthat vz:

A centrifugls ksve kezdodik vagy egyltaln nem kerl elvgzsre:
Ha nem sikerl kijavtania vagy meghatroznia a hibt, forduljon szakszervzhez. Ezt megelozoen jegyezze fel a gp tpust, a termkszmt Prod. No./ s a vsrls idopontjt, mert ezeket krni fogjk ntol.

Pagina 91

The Electrolux Group is the worlds largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx.14 billion USD in more than 150 countries around the world.
The Electrolux Group. The worlds No.1 choice.
Skupina Electrolux je nejvtsm svtovym vyrobcem spotrebic pro kuchy, cistotu a venkovn pouzit. Vce nez 55 milion vyrobk Skupiny Electrolux (jako jsou chladnicky, sporky, pracky, vysavace, retzov pily a travn sekacky) v celkov hodnot az 14 miliard USD je prodno kazdym rokem ve vce nez 150 zemch svta.
Spolocnost Electrolux je najvcs svetovy vyrobca kuchynskych spotrebicov, vysvacov, zariaden na pranie a techniky pre les a zhradu. Kazdy rok kpia zkaznci od Electrolux Group viac ako 55 milinov spotrebicov (ako s chladnicky, sporky, prcky, vysvace, retazov ply a kosacky) v hodnote priblizne 14 milird USD v takmer 150 krajinch na celom svete.
Az Electrolux Csoport a vilg legnagyobb konyhai, frdoszobai, tisztto s szabadtri kszlkeket gyrt vllalata. Tbb mint 55 milli Electrolux Csoport ltal forgalmazott termket (tbbek kztt hutoszekrnyeket, tuzhelyeket, porszvkat, lncfurszeket s funyr gpeket) adnak el vente mintegy 14 millrd dollr rtkben a vilg tbb mint 150 orszgban.