Here you can find all about Zanussi FLE1416W like manual and other informations. For example: review.
Zanussi FLE1416W manual (user guide) is ready to download for free.
On the bottom of page users can write a review. If you own a Zanussi FLE1416W please write about it to help other people. [ Report abuse or wrong photo | Share your Zanussi FLE1416W photo ]
Zanussi FLE1416W, size: 2.0 MB
User reviews and opinions
No opinions have been provided. Be the first and add a new opinion/review.
2 MAINS-ON light
This light is connected to the ON/OFF button. It lights up when you press the button, and goes out when you press it again.
3 FABRICS button
Press this button repeatedly to select the programme on the basis of the type of laundry to be washed. The light relevant to the selected programme will light up. The washing machine will propose a temperature and automatically select the maximum spin value provided for the programme you have chosen. You can change these values by operating buttons 4 and 5.
4 TEMPERATURE button
Press this button repeatedly to increase or decrease the temperature, if you want your laundry to be washed at a temperature different from the one proposed by the washing machine. The relevant light will light up. Maximum temperatures are 90C for cotton, 60C for synthetic fabrics, 40C for delicate fabrics and wool. Important! By pressing the TEMPERATURE and SPIN SPEED buttons simultaneously, the acoustic signal at the end of the cycle is deactivated. By pressing these 2 buttons again the acoustic signal is reactivated.
Important! If you accidentally press the SKIP/RESET button more than once, the memory will be cleared. To cause the washing machine to drain the water, select any washing programme by means of the FABRIC button, then press SKIP/RESET three times in order to select the DRAIN position (only the DRAIN light will remain lit).
7 START/PAUSE button
This button has three functions: Start: after you have selected the desired programme and options, press this button to start the washing machine. The light above the button will stop flashing and remain lit. Pause: when you press this button again, the programme in progress is interrupted. The light above the button will start flashing. To restart the programme, press the button again. When you PAUSE the cycle, the DOOR LOCKED light goes out, and it becomes possible to open the door, provided the washing machine is not in the heating phase beyond 40C; the level of the water is not high; the drum is not turning. Important! You must set the washing machine to PAUSE before you make any change in the programme in progress. Draining of water and spinning after the execution of programmes with the RINSE HOLD option.
6 OPTIONS button
Press this button to select the following options: PREWASH: select this option if you wish your laundry to be prewashed before the main wash (not available for wool). The prewash ends with a short spin at 650 rpm in programmes for cotton and synthetic fabrics, whereas in the programme for delicate fabrics the water is only drained. SUPER RINSE: this option can be selected with all programmes except the wool programme. The machine performs 4 rinses instead of 3. This option is recommended for people who are allergic to detergents, and in areas where the water is very soft. QUICK WASH: for laundry that is only slightly soiled (not for wool). The washing time will be reduced according to the type of fabric and the selected temperature. The PREWASH and QUICK WASH options cannot be selected together.
8 SKIP/RESET button
This button performs two functions: - Clears the memory - Selects special programmes At the end of every programme the RESET button must be pressed once or repeatedly to clear the programme memory. All the programme phase indicator lights must be off. If the previous programme is not cleared, an audible signal will sound, when you switch the machine on. Selecting a special programme: A wash programme must be selected in the normal way. (START button not pressed)
S TA R T / P A U S E
A normal wash cycle consists of the following phases, Wash - Rinses - Spin and is confirmed by the illumination of the corresponding LED,s.
PREWASH WASH RINSES RINSE HOLD SPIN DRAIN CLOGGED FILTER END
9 Programme phase indicator lights
When you select a programme, the lights relevant to the phases that form the programme light up.
To select rinse & spin, press the SKIP button once, the wash LED goes out. After you have started the programme, only the light relevant to the phase that is currently being carried out will remain lit. At the end of the cycle the light will illuminate. If at the end of the programme the light comes on, this means that the drain filter must be cleaned (see page 17). The END light flashes if there are operating problems. At the same time one of the following lights comes on indicating the type of problem: : problem with the water supply : problem with water draining : door open See paragraph Something Not Working.
To select spin only, press the SKIP button twice. The wash & rinse LED,s go out.
To select Drain, press the SKIP button three times, the wash - rinse - spin LED,s go out.
If you wish to cancel or advance the running programme to the required phase, PAUSE the cycle and then press the SKIP button as previously described.
Before the first wash, we recommend that you run a cotton cycle at 60C, without any laundry in the machine, to remove any manufacturing residue from the drum and tub. Pour 1/2 a measure of detergent into the main wash compartment of the dispenser drawer and start the machine.
4. Switch the machine on
Press the ON/OFF button to switch the machine on. The light above the button will light up.
O N / OFF
1.Load the laundry
Open the door. Place the laundry in the drum, one item at a time, shaking them out as much as possible. Close the door.
5. Select the desired programme/ fabric
Press the FABRICS button repeatedly, in order to select the desired programme/fabric. The relevant light will light up. The lights relevant to the phases that form the programme will light up. The START/PAUSE button light will start flashing.
Load the laundry loosely alternating large items with small ones. Sort the laundry according to the type of fabric, colour-fastness and how dirty it is. Avoid washing unhemmed or torn items as they may unravel. Before washing, empty all pockets of small objects which may have been left inside (coins, keys, screws etc). as these could damage the drain pump. When washing curtains, remove the hooks. Close poppers and zips and fasten loose buttons. It is essential to wash new coloured items separately when washing for the first time. When washing fabrics requiring different wash temperatures together, always select the lowest temperature. White items should not be washed with coloured items. Very small items (handkerchiefs, ribbons, socks etc) should be washed in a washing bag or a pillow case. Use a good quality detergent suitable for automatic washing machines. Use the correct quantities of detergent.
To ensure you obtain the best wash results from your appliance, it is important to use the right detergent in your everyday wash, and only detergents recommended for use in automatic machines. To maintain the appearance of your clothes and household textiles and to make them last longer you should use different types of detergent for different washes, whether for whites, colours or delicates.
And in which form?
Not only are there different types of detergent, but they are also available in different forms. Whether you chose a powder or liquid in traditional or compact form is your own personal choice.
Pour the powder directly into the dispenser drawer. Do not sprinkle powder onto clothes in the machine drum.
We recommend the Ariel product range which is biological and designed to provide excellent cleaning and stain removal even at low temperatures.
Liquid can be placed in the main wash compartment of the detergent drawer marked with the symbol , start the machine immediately upon placing the detergent in the dispenser drawer. Alternatively the detergent is measured into the specially designed dosing device* which should be placed on top of the laundry, and at the back of the machine drum.
If you prefer to use a non biological detergent, which does not contain enzymes we recommend Fairy. Fairy provides good cleaning and stain removal.
COMPACT POWDERS AND LIQUIDS
Compact detergents (or concentrates as they are also known) are available in liquid or powder form, and generally require a smaller dosage. Follow the manufacturers instructions to ensure the most economical usage. Pour the detergent directly into the dispenser drawer, or alternatively measure the detergent into the specially designed dosing device* which should be placed on top of the laundry, and at the back of the machine drum. * If you use a dosing device in a washer dryer, please ensure the dosing device/ball is removed before carrying out a drying programme.
For coloured items you should use a detergent which is designed to clean while maintaining the original colour. Ariel Color does not contain bleach and therefore helps to preserve colours.
When washing delicates such as woollens, you should use a product which is specially designed to care for fine fabrics. Dreft Automatic is suitable for woollens and other delicates.
These are ideal for improving softness, and also reduce static cling on synthetics and make ironing easier. They are available in two types: For example Lenor liquid fabric softener, for use in the washing machine/washer dryer. The liquid fabric softener should be poured into the compartment marked with the symbol. Follow the manufacturers dosage instructions and never exceed the MAX level. Bounce conditioning sheets for use in a tumble dryer. We recommend the conditioning sheets are pinned (using a safety pin) to an article of laundry and placed in the tumble dryer.
For additional stain removal you may wish to use a product such as Ace Gentle Bleach which is used in addition to your chosen detergent. Ace is suitable for all washable fabrics including silks, woollens and coloureds.
Wash Care Symbols
Wash care labels inside garments recommend how to launder your clothes with the best results. The care labelling code is in line with care labelling used in the rest of Europe. The symbols used make it easy to select the correct programme on your washing machine.
Normal (Maximum) Normal (Maximum)
White Cotton or Linen without Special Finishes Cotton, Linen or Viscose without Special Finishes Colourfast at 60C. Nylon, Polyester/Cotton, Viscose with Special Finishes, Cotton/Acrylic Mix. Cotton, Linen or Viscose Colourfast at 40C but not 60C. Acrylics, Acetate, Triacetate, Wool mixes, Polyester/wool blends. Wool, wool mixtures, Silks Do not machine wash
Reduced (Medium) Normal (Maximum) Reduced (Medium) Much Reduced (Minimum) Hand wash only
BLEACHING Chlorine bleach may be used IRONING Hot iron Warm iron Cool iron DRY CLEANING May be dry cleaned. Other letters and/or a bar beneath the circle will indicate the required process to the dry cleaner. TUMBLE DRYING with high heat setting with low heat setting May be tumble dried Cotton, Linen, Viscose Polyester mixtures, Wool Acrylic, Nylon, Polyester
A cross through any symbol means DO NOT
For best results, always use the dispenser drawer for dispensing detergents and liquid additives. Once the dispenser has been filled, close it by pushing it in gently. This is particularly important if you are using 14
fabric conditioner to avoid the conditioner entering the machine prematurely. When using liquid detergent and a prewash programme, place the detergent into the correct compartment in the dispenser drawer, after the prewash has finished.
Type of laundry and symbols on labels
Programme/ temperature Cottons 60-90C
Description of programme Main wash at 60-90C 3 rinses Long spin
Consumption* Available options Energy kWh 2.1 Water litres 58 Time h/min. 2.28
White cotton: e.g. sheets, tablecloths, household linen
SPIN SPEED RINSE HOLD PREWASH SUPER RINSE QUICK SPIN SPEED RINSE HOLD PREWASH SUPER RINSE QUICK
Coloured cotton: e.g. shirts, blouses, underwear, towels, household linen
Main wash at Cottons 60- 40-30C 60-40- 30C 3 rinses Long spin
Synthetic fabrics and blends: e.g. shirts, blouses, underwear
Main wash at 60-50-4030C 3 rinses Short spin Main wash at 40-30C 3 rinses Short spin
Delicate fabrics: e.g. acrylic fabrics, viscose, polyester, synthetic blends
Main wash at 40-30C 3 rinses Short spin
SPIN SPEED RINSE HOLD
The coloured cotton programme at 60C with a wash load of 5 kg is the reference programme for the data entered in the energy label, in compliance with EEC 92/75 standards. * This data is given purely as an indication: the consumption values may vary in relation to the quantity and type of laundry, the temperature of the water supply and the ambient temperature. The data refers to the highest temperature provided for each programme. The machine is capable of washing up to 6 kg, however, to achieve optimum wash results it is recommended that the above wash load are adhered to.
Maintenance and Cleaning
Before any maintenance or cleaning is carried out you must DISCONNECT the appliance from the electricity supply. To aid cleaning, the top part of the additive compartment should be removed.
Mod.. Prod. No. Ser. No.
Mod.. Prod. No.
Standard guarantee conditions
We, Zanussi undertake that if, within 12 months of the date of the purchase, this Zanussi appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option, repair or replace the same FREE OF ANY CHARGE for labour, materials or carriage on condition that: G The appliance has been correctly installed and used only on the electricity supply stated on the rating plate. G The appliance has been used for normal domestic purposes only, and in accordance with the manufacturers instructions. G The appliance has not been serviced, maintained, repaired, taken apart or tampered with, by any person not authorised by us. All service work under this guarantee must be undertaken by a Zanussi Service Force Centre. Any appliance or defective part replaced shall become the Companys property. This guarantee is in addition to your statutory and other legal rights. Home visits are made between 8.30am and 5.30pm Monday to Friday. Visits may be available outside these hours in which case a premium will be charged.
This guarantee does not cover:
Damage or calls resulting from transportation, improper use or neglect, the replacement of any light bulbs or removable parts of glass or plastic. Costs incurred for calls to put right an appliance which is improperly installed or calls to appliances outside the United Kingdom. Appliances found to be in use within a commercial environment, plus those which are subject to rental agreements. Products of Zanussi manufacture which are NOT marketed by Zanussi.
If you should move to another country within Europe then your guarantee moves with you to your new home subject to the following qualifications: G The guarantee starts from the date you first purchased your product. G The guarantee is for the same period and to the same extent for labour and parts as exists in the new country of use for this brand or range of products. G The guarantee relates to you and cannot be transferred to another user. G Your new home is within the European Community (EC) or European Free Trade Area. G The product is installed and used in accordance with our instructions and is only used domestically, i.e. a normal household. G The product is installed taking into account regulations in your new country. Before you move please contact your nearest Customer Care Centre, listed below, to give them details of your new home. They will then ensure that the local Service Organisation is aware of your move and able to look after you and your appliances. France Senlis +33 (0)Germany Nurnberg +49 (0)2600 Italy Pordenone +39 (0)Sweden Stockholm +46 (0)UK Slough +44 (0)1753 219897
To contact your local Service Force Centre telephone 08705
ISLE OF LEWIS
Guernsey Electricity PO Box 4 Vale, Guernsey Channel Islands GY1 3AD Jersey Electricity Company Haut De Lorme Rue De Haut De Lorme Trinity Jersey Channel Islands JE3 5FG
ND Macleod 16 James Street Stornoway Isle of Lewis PA87 2QW 2, 6 & 8 Woodmarket Kelso Borders TD5 7AX 7 King Street Kirkwall Orkney KW15 1JF Scottish Hydro Electric Central Warehouse Inveralmond Perth PH1 3AF 3-4 Carlton Place Lerwick Shetland ZE1 0PW Bolts Shetland 26 North Road Lerwick Shetland ZE1 0PE Leask Electrical Harisdale Symbister, Whalsay Shetland ZE2 9AA
Unit 356a Dukesway Court Dukesway Gateshead NE11 0BH 15 Hainton Avenue Grimsby N. E. Lincs DN32 9AS Unit 1 Boulevard Industrial Estate Hull HU3 4AY 64-66 Cross Gates Road Cross Gates Leeds LS15 7YS Unit 23 Northfield Way Aycliffe Industrial Park Newton Aycliffe DL5 6EJ Pennine House Roman Ridge Road Sheffield S9 1GB
54 Claremont Street Aberdeen AB10 6RA 33a Burnside Auchtermuchty Fife KY14 7AJ Unit 5 Block 2 Auchenraith Ind. Estate Rosendale Way Blantyre G72 0NJ 93 Irish Street Dumfries DGPQ 7 Hill Street Dunoon Argyll PA23 7AL Unit 12 Dumbryden Ind. Estate 2 Dumbryden Road Edinburgh EH14 2AB Unit 4 Wellington Road Bishopriggs Glasgow G64 2SA Unit 3BI Smithton Ind. Estate Smithton Inverness IV2 7WL R Haggerty Bruach Blackwaterfoot Isle of Arran J Zerfah 244 Bruernish Isle of Barra Western Islands HS9 5QY Walker Engineering Glenmhor Upper Serpentine Road Rothesay Isle of Bute PA20 9EH
(OWN SALES) SHETLAND
(OWN SALES) WHALSAY
Owenmore House Kilwee Business Park Dunmurry Belfast BT17 0HD
1 Kelvin Park Dock Road Birkenhead CH41 1LT Unit 7 James Street Workshops James Street Carlisle Cumbria CA2 5AH South Quay Ind. Estate Douglas Isle of Man IM1 5AT Unit B Central Industrial Estate St Marks Street Bolton BL3 6NR Unit 250 Dawson Place Bamber Bridge Preston Lancashire PR5 8AL Unit 20 Haigh Park Haigh Avenue Stockport SK4 1QR
ISLE OF MAN
Unit 4 Guardian Industrial Estate Clydesmuir Road Cardiff CF2 2QS Unit 6-7 Coed Parc Abergele Road Rhuddlan Clwyd LL18 5UG Unit 9 St. Clears Business Park Tenby Road St. Clears Carmarthen SA33 4JW Plas Ffynnon Warehouse Middleton Road Oswestry SY11 2PP
ISLE OF ARRAN
ISLE OF BARRA
ISLES OF BUTE
LONDON & EAST ANGLIA
66 Birch Road East Wyrley Trading Estate Witton Birmingham B6 7DB Pinfold Road Bourne PE10 9HT 68 St. Marys Street Bridgnorth Shropshire WV16 4DR 101 Rycroft Street Gloucester GL1 4NB Units 3 & 4 Bank Buildings Cattle market Hareford HE4 9HX Higham Ferrers Northants NN10 8PL Unit 2 Furnace Road Ilkeston DE7 5EP Unit 7 Oaks Industrial Estate Coventry Road Narborough Leicestershire LE9 5GF Unit 8 Clifton Street Stone Field Park Lincoln LN5 8LQ 18-21 Croft Road Brampton Ind. Estate Newcastle under Lyme Staffordshire ST5 0TW 13 Thornhill Road North Moons Moat Redditch Worcestershire B98 9ND Unit 3 Sterling Park Claymore Tamworth B77 5DQ Units 1 & 2 Northbrooks Close Gregorys Mill Ind. Estate Worcester WR3 8BP
11a Gardner Ind. Estate Kent House Lane Beckenham Kent BR3 1QZ Hanbury Road Widford Ind. Estate Chelmsford Essex CM12 3AE Unit 14 Capitol Park Capitol Way Colindale London NW9 0EQ 194 Court Road Mottingham Eltham London SE9 4EW 284 Alma Road Enfield London EN3 7BB Unit B4 Imperial Business Estate West Mill Gravesend Kent DA11 0DL Unit 6C Elton Park Business Centre Hadleigh Road Ipswich IP2 0DD 16-17 Woodside Ind. Park Works Road Letchworth Herts SG6 1LA 2 - 4 Royal Lane Yiewsley West Drayton Middlesex UB7 8DL Reform Road Maidenhead Berkshire SL6 8BY 10 Island Farm Avenue West Molesey Surrey KT8 2UZ 9 Pipers Court Berkshire Drive Thatcham Berkshire RG19 4ER 2b Trafalgar Street Norwich NR1 3HN Unit 1a The Summit Hanworth Road Sunbury on Thames TW16 5DB
Unit 2 Bridge Road Business Centre Bridge Road Ashford Kent TN23 1BB Unit 1 Redfields Ind. Estate Church Crookham Fleet Hampshire GU13 0RD 21-25 Bridge Road Haywards Heath Sussex RH16 1UA Unit 30 Deacon Trading Estate Morley Road Tonbridge TN9 1RA
HIGHAM FERRERS 30 High Street
Main Road Fremington Barnstaple North Devon EX31 2NT Bournemouth Dorset BH1 4PW
BOURNEMOUTH 63-65 Curzon Road
6 Herswell Business Park Salmon Parade Bridgwater Somerset TA6 5PY 11 Eldon Way Eldonwall Trading Estate Bristol BS4 3QQ 266 Main Road Southbourne Emsworth PO10 8JL Unit 8 Enterprise Court Ryde Business Park Ryde Isle of Wight PO33 1DB Zealley Ind. Estate Kingsteignton Newton Abbot TQ12 3TD Unit 7D Pool Ind. Estate Druids Road Redruth Cornwall TR15 3RH
NEWCASTLE UNDER LYME
ISLE OF WIGHT
NEWTON ABBOT Unit 2
It is dangerous to alter the specifications or attempt to modify this product in any way. Care must be taken to ensure that the appliance does not stand on the electrical supply cable. Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person. Should the appliance power supply cable need to be replaced, this should be carried out by our Service Force Centre.
DIMENSIONS Height Width Depth 85 cm 60 cm 60 cm 230-240 V/50 Hz 2050 W (10A) Minimum Maximum Maximum 50 kPa (0.5 bar) 800 kPa (8 bar) 1000 rpm (FLE 1016 W) 1100 rpm (FLE 1116 W) 1200 rpm (FLE 1216 W) 1400 rpm (FLE 1416 W) 5 kg (max. 6 kg) 2.5 kg 2.5 kg 2 kg 0.95 kWh 55 litres POWER SUPPLY VOLTAGE TOTAL POWER ABSORBED WATER PRESSURE SPIN SPEED
Cotton, linen Synthetics Delicate fabrics Wool Energy Water
CONSUMPTION DATA CALCULATED ON 5 KG NORMALLY SOILED COTTON ITEMS AT 60C
This appliance complies with the following E.E.C. Directives: - 73/23 EEC of 19.2.73 (Low Voltage Directive) and subsequent modifications; - 89/336 EEC of 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.
All transit bolts and packing must be removed before using the appliance. You are advised to keep all the packaging for re-use in case the machine is to be transported again. Using a spanner unscrew and remove the rear right bolt. Lay the machine gently on its back, making sure that the hoses are not squashed.
Install the machine on a flat hard floor. Make sure that air circulation around the machine is not impeded by carpets, rugs etc. Check that the machine does not touch the wall or other kitchen units. Never place cardboard, wood or similar materials under the machine to compensate for any unevenness in the floor. Your new washing machine has been designed to be permanently plumbed in to your homes water supply and drainage system. However, if this is not possible, it may be connected to a suitable existing tap with the drain hose discharging into a sink. The appliance has an inlet hose, with female 3/4 BSP thread connector. If this connection is not compatible with the plumbing of the existing installation, a variety of connectors are available from good hardware stores and plumbers merchants to suit most domestic plumbing. Any alteration to your existing plumbing must be carried out by a competent person, or qualified plumber.
Remove the polystyrene block from the bottom of the machine and release the two plastic bags. Carefully slide out the right polythene bag (1). Repeat the operation for the left polythene bag (2).
Installation on a Suspended Floor
Suspended wooden floors are particularly susceptible to vibration. To help prevent vibration we recommend you place a waterproof wood panel, at least 15 mm thick under the appliance, secured to at least 2 floor beams with screws. If possible install the appliance in one of the corners of the room, where the floor is more stable.
Remove the polystyrene base. Set the machine upright and remove the two remaining bolts from the back. Pull out the three plastic spacers from the holes into which the bolts were fitted. Plug all the holes with the plugs which you can find in the envelope containing the instruction booklet.
Connect the hose to a tap with a 3/4 thread.
Installation should comply with local water authority and building regulations requirements. The appliance must be connected to a cold water supply. A minimum water pressure of 50 kPa (0.5 bar) is required for safe operation of the appliance.
If you cannot make the cold water connection direct from the rising mains, you may be able to operate the appliance from your cold water storage system. There should be a minimum distance of 5.02m (161/2 ft) between the appliances inlet and the bottom of the water storage tank. Set the hose correctly by loosening the ring nut. After positioning the inlet hose, be sure to tighten the ring nut again to prevent leaks.
When discharging into a standpipe ensure that the top of the curve in the hose end is no more than 90cm (35.4'') and no less than 60cm (23.6'') above floor level. The upright standpipe should have a minimum length of 30cm (12'') from the bottom of the elbow to the top of the pipe (see diagram). Make sure that it is designed in such a way, that the end of the drain hose cannot be covered with water. The drain hose may be extended to a maximum of 4 metres. An additional drain hose and joining piece is available from your local Service Force Centre. The joining piece must have an internal diameter of 18mm. If you intend the drain hose to empty into a sink, make sure that the sink is empty and the plug hole is not blocked. Use the plastic U-Piece supplied.
This appliance is designed to be permanently plumbed into your home's water supply and drainage system.
Max. 90 cm.(35.4")
Min.60 cm. (23.6")
Before connecting up the machine to new pipework or to pipework that has not been used for some time, run off a reasonable amount of water to flush out any debris that may have collected in the pipes.
The appliance drain hose should hook into a standpipe, the hook in the drain hose is formed using the plastic U-Piece supplied. The standpipe should have an internal diameter of approximately 38mm (see diagram) thus ensuring there is an air break between the drain hose and standpipe.
mm.(1/2") diameter standpipe
Min. 30 cm.(12")
Level the washing machine by raising or lowering the feet. The feet may be tight to adjust as they incorporate a self locking nut, but the machine MUST be level and stable (check diagonally).
Washing machines and dishwashers should be connected to the FOUL drainage system, the water will then be taken to a sewage works for treatment before being discharged safely into a river. It is essential that these appliances are not connected to the surface water drainage system as this water is discharged directly into a river or stream and may cause pollution. If you require any further advice please contact your local water authority.
Any necessary adjustment can be made with a spanner. Accurate levelling prevents vibration, noise and displacement of the machine during operation. Some vibration is inevitable, especially if mounted on a wooden floor. Sprung wooden floors are particularly susceptible to vibration. For advice, consult a builder. If possible, always place the machine on a solid floor.
SHOWER SINK BATH TOILET BIDET
If the floor is carpeted or covered with crumbly or soft material, insert a rigid support base under the feet to prevent noise, vibration or displacement. The base should protrude a few centimetres beyond the edges of the machine. Warning The machine should NOT be placed on deep pile carpeting.
WASHING MACHINE RAINWATER 'RUN-OFF' DISHWASHER
FOUL DRAIN SURFACE WATER DRAINS & SEWERS FOUL SEWERS SEWAGE TREATMENT WORKS TREATED DISCHARGE RIVER RIVER
Note Please ensure that when the appliance is installed it is easily accessible for the engineer in the event of a breakdown.
Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. WARNING: THIS APPLIANCE MUST BE EARTHED. The manufacturer declines any liability should this safety measure not be observed. Before switching on, make sure the electricity supply voltage is the same as that indicated on the appliances rating plate. The rating plate is located at the top of the rim of the open door.
The wire coloured brown must be connected to the terminal marked L or coloured red. Upon completion there must be no cut, or stray strands of wire present and the cord clamp must be secure over the outer sheath. WARNING: A cut off plug inserted into a 13 amp socket is a serious safety (shock) hazard. Ensure that the cut off plug is disposed of safely. Should the appliance power supply cable need to be replaced, this should be carried out by our Service Force Centre. Note When the appliance is installed the power supply cable must be accessible.
In the case of permanent connection it is necessary that you install a double pole switch between the appliance and the electricity supply (mains), with a minimum gap of 3mm between the switch contacts and of a type suitable for the required load in compliance with the current electrical regulations. The switch must not break the yellow and green earth cable at any point.
The appliance is supplied with a 13amp plug fitted. In the event of having to change the fuse in the plug supplied, a 13amp ASTA approved (BS1363A) fuse must be used. Should the plug need to be replaced for any reason, proceed as described below. The wires in the mains lead are coloured in accordance with the following code: Green and Yellow - Earth Blue - Neutral Brown - Live
GREEN & YELLOW
E 13 A N L
The wire coloured green and yellow must be connected to the terminal marked with the letter E or by the earth symbol or coloured green and yellow. The wire coloured blue must be connected to the terminal marked N or coloured black.
From the Electrolux Group. The worlds No. 1 choice.
The Electrolux Group is the world's largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx. USD 14 billion in more than 150 countries around the world.
Electrolux Household Appliances Limited 2001
MCS-1330 Murano-2006 HL-1050 KX-TG8011FX SL-75DRV5 WM-GX654 ACC-31 Avic-HD3 Ericsson K750 Combisnack TM-H6000III 266XL 6722DW EP1052 Vista-128FB 26PF9946 M400-S4031 RT-44NA10T Blueant T1 Cristallo 400 HK505 2200C MXU 150 Travelmate-4600 AZ2558 00C Showman 412S Indy Team RC-5900M MAV-555 Aspire-1500 214SI IC-A22 Km001 CD1352S LQ-850 Commerciale 11 KX-TCD220G SJ700AW TY-WK42pv3U TF-53B5DF 2 2 Classe A CP3500 Riva 850 SGH-M300N SD 623 GPS-3V506-IUS GR26sbtmr DDR556RH RS-1500US Filter Aingel 3201 HDR-UX1E LN40A610a3R Server Review Fd-160A SCH-W270 Plantronics MX10 DMC-LZ1 CX-76G HT903TAW Espio 60S Zoom Lens S9600 Portable Scsi GR-D320EX Coolpix 5600 ZDT6453 BKS 18 KX-P4400 Uguru Focus-2004 Companion CQ-C7300W SP-6-spartan VI Cry-instincts 1 0 Power 760 Zoom 2020 GP-150 PB8260 System AED-2485EG Phoenix MP33 Gun G15 Ericsson Z200 Audio 350 Ryobi P110 Roland SH09 CCC-312 VS-1880 KH 6778 Printer 855 Id-1 NAD T737 SC-PM38 LRD6199SWS K7VT4a 2603 N CEM2872
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101