WASHING MACHINE FLS 1084

Whites Fast coloureds Non-fast coloureds Synthetics Mixed fabrics Wool
A B 95 C 60 D 40 J 50 K 40 L
Delicates Quick wash Worn once Rinses Spin

40 M 40 F 30 N G P H Q R

124976350

INSTRUCTION BOOKLET

i Your New Washing Machine
Your new washing machine meets all modern needs for effective treatment of laundry with low water, energy and detergent consumption.
Automatic cooling of the wash water to 60C before draining, with the 95C programme, prevents distortion of plastic pipes in the domestic water system due to the high temperature of the water. The special wool programme with its new delicate wash system treats your woollen with extreme gentleness. The anti-unbalance device ensures that the washing machine remains stable when spinning.
In the interest of the environment

Ecological hints

To save water and energy and help protect the environment, we recommend that you follow these hints: s Adjust the quantity of detergent according to the hardness of your water supply, the amount of laundry and the degree of soiling. s Select a quick programme for lightly soiled laundry. s A programme without prewash is sufficient for normally soiled laundry.
Materials marked with the symbol are recyclable. Check with your local Council or Environmental Health Office to see if there are facilities in your area for re-cycling this appliance. When the appliance is to be scrapped, cut off the power supply cable and make the door lock device unusable to prevent young children from being trapped inside. Help to keep your country tidy - use authorised disposal sites for your old appliance.
How do we help to protect the environment? We use recycled paper!
Important Safety Information
It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant warnings. These warnings have been provided in the interest of safety. You MUST read them carefully before installing or using the appliance.

Istallation

This appliance is heavy. Care should be taken when moving it. It is dangerous to alter the specifications or attempt to modify this product in any way. All packing and transit bolts must be removed before use. Serious damage can occur to the product and to property if this is not adhered to. See relevant section in instructions. Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person. Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. Care must be taken to ensure that the appliance does not stand on the electrical supply cable. If the machine is situated on a carpeted floor, please adjust the feet in order to allow air to circulate freely.

Child Safety

This appliance is designed to be operated by adults. Children should not be allowed to tamper with the controls or play with the product. Pets and children have been known to climb into washing machines. Please check your drum before use. The glass door becomes very hot during the washing cycle. Keep children away from the vicinity of the appliance whilst it is in operation. Keep all packaging well away for children. Keep all detergents in a safe place out of childrens reach.

Always unplug the appliance and turn off the water supply after use. Do not overload the appliance. See relevant section in the instruction book. Only wash fabrics which are designed to be machine washed. If in doubt, consult the care label on the clothes. Before washing, ensure that all pockets are empty and buttons and zips are fastened. Avoid washing frayed or torn articles and treat stains such as paint, ink, rust, and grass before washing. Underwired bras must NOT be machine washed. Any objects such as coins, safety pins, nails, screws, stones or any other hard, sharp material can cause extensive damage and must not be placed into the machine. Garments which have been in contact with volatile petroleum products should not be machine washed. If volatile cleaning fluids are used, care should be taken to ensure that the fluid is removed from the garment before placing in the machine. Wash small items such as socks, laces, washable belts etc in a washing bag or pillow case as it is possible for such items to slip down between the tub and the inner drum. Only use the advised quantities of fabric softener. Damage to the fabric can ensue if you over-fill. Refer to the manufacturers recommendations of quantities. As some duvets and eiderdowns should be washed in large commercial machines because of their bulk, please check with the manufacturer of the item before washing in a domestic machine. Leave the porthole door slightly ajar between washes to preserve the door seal. Under no circumstances should you attempt to repair the machine yourself. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact your local Zanussi Service Force Centre. Always insist on genuine Zanussi spare parts.

Contents

For the User
Your New Washing Machine Important Safety Information Description of the Appliance
Door locked light Detergent dispenser drawer 7-10 11-13 14-15 16-18-20

For the Installer

Installation Instructions Technical Specifications
Unpacking Positioning Water inlet Water drainage Levelling Special conditions In the interest of the environment Electrical connection 24 25
The Control Panel Operating sequence
Washing 4.5 kg of withe cotton at 95C Load the laundry Measure out the detergent Measure out the fabric softener Select the required option Select the required programme Start the machine At the end of the programme Washing 2 kg of mixed fabrics at 40C Load the laundry Measure out the detergent Measure out the fabric softener Select the required option Select the required programme Start the machine At the end of the programme

Washing Hints

Which detergent to use?. And in which form? Use of detergent and additives
Wash Care Symbols Washing Programmes Maintenance and Cleaning
Descaling After each wash External cleaning Cleaning the dispenser drawer Cleaning the drawer recess Cleaning the filter The dangers of freezing
Something Not Working Service and Spare Parts Peace of Mind for Twelve Months
Guide to use the Instruction Book
The following symbols will be found in the text to guide you throughout the instructions:
Safety instructions i Hints and tips Environmental information
Description of the Appliance
1 Detergent dispenser drawer 2 Programme guide 3 Options buttons 4 Mains-on light 5 Programme selector dial/ON/OFF switch 6 Door opening handle 7 Filter 8 Adjustable feet
Detergent dispenser drawer
Prewash Wash Fabric softener

The Control Panel

Temp. Temp.

A B C D J K L

Delicates Quick wash Worn once Rinses Spin Drain
1 Programme guide 2 Half load button
Select this button to reduce water consumption on the rinse cycle when washing a smaller load of cottons or linens (maximum load size = 2.25 kg). The machine will perform 3 rinses instead of 4.

5 Extra Rinse button

By depressing this button the machine will perform the rinses with high water level. This is recommended for people who are allergic to detergents and in areas where the water is very soft.

6 Mains-on light

This light illuminates when the machine starts working and goes out at the end of the programme.

3 RINSE HOLD button

Press this button to make the machine stop with water in the drum after the synthetic or delicate wash cycles. This prevents any creasing which may take place if the clothes are left damp in the drum. When it is convenient for you to empty the machine, simply press this button again so that the machine can proceed to drain and short spin, or turn the dial to the drain programme R. If this button is not activated, the washing programmes will end with a short spin. Do not press this button for woollens: wool items should be gently spun.
7 Programme selector dial/ON/OFF switch
With the programme selector dial you choose the desired washing programme. Turn it clockwise. To start the programme, pull the dial outwards. To switch the machine off, push the dial inwards. Before setting the dial to any position the machine must be switched off by depressing the dial.
4 Spin Speed Reduction button
By depressing this button the spin speed will be reduced as follows: - cotton and linen: from 1000 to 500 rpm - synthetics, delicates and wool: from 600 to 400 rpm.

4. Select the required option
Depress the RINSE HOLD button if required. or SPIN REDUCTION

P0215S

P0216S
The machine stops automatically and the mains-on light goes out. If you have depressed the rinse hold button , the machine will stop with the water left in the tub, to prevent the fabric from creasing. To drain the water release the same button (the clothes will be gently spun) or select programme R. The door is controlled by a safety device which releases 2 minutes after the end of the programme. Switch the machine off by depressing the programme selector dial. When the programme has finished you are advised to unplug the appliance and turn off the water taps.

i Washing Hints

Do NOT overload the machine. Weigh the laundry the first few times you use the appliance. The average weights of the most common items are listed below as a guide: 1000g = 1 kg
Sheet Pillow case Tablecloth Serviette Tea towel Linen hand towel Towelling hand towel Towelling bath towel Bath robe Mans shirt Apron
700-1000 g 100-200 g 400-500 g 50-100 g 70-120 g 100-150 g 150-250 g 700-1000 g 1000-1500 g 200-300 g 150-200 g
Some stains such as fruit, wine, grass, rust etc. are difficult to remove and should be treated before washing with specific products, which can be found in most household shops. In some cases it may help to soak the stain before washing with a special presoak product or biological detergent. Only wool marked Pure New Wool - washable, preshrunk can be washed in the machine using the wool programme; other types of wool should be washed by hand or dry cleaned. If you have used the machine to wash, rinse or spin only non-colour fast garments, there may be dye left in the sump. To ensure any subsequent wash is not contaminated with the dye, select and carry out a rinse and spin programme, without any garments, to ensure that any dye is removed from the sump. Once you have finished using the machine, you are advised to unplug it and turn off the water taps.

Load the laundry loosely alternating large items with small ones. Sort the laundry according to the type of fabric, colour-fastness and how dirty it is. Avoid washing unhemmed or torn items as they may unravel. Before washing, empty all pockets of small objects which may have been left inside (coins, keys, screws etc). as these could damage the drain pump. When washing curtains, remove the hooks. Close poppers and zips and fasten loose buttons. It is essential to wash new coloured items separately when washing for the first time. When washing fabrics requiring different wash temperatures together, always select the lowest temperature. White items should not be washed with coloured items. Very small items (handkerchiefs, ribbons, socks etc) should be washed in a washing bag or a pillow case. Use a good quality detergent suitable for automatic washing machines. Use the correct quantities of detergent. For wool, use gentle detergent only in small quantities. Bleach is very corrosive; it should be used with care and kept out of reach of children.

Which detergent to use?.

For most clothes and household textiles, CONVENTIONAL DETERGENTS will give good washing results. Conventional detergents are available in either a biological, such as Ariel, or a non-biological form, such as Fairy, and are particularly suitable for whites. Biological detergents provide improved stain removal, especially at lower temperatures. For coloured clothes and household textiles, you should use COLOUR DETERGENTS, like Ariel Color, which are designed to maintain the original colour of these items, as well as providing excellent cleaning performance. These are all biological detergents. They are particularly suitable for matching and co-ordinated sets of lingerie, bedding or towels. For washing wool and silk, COLOUR DETERGENTS ARE NOT SUITABLE. For wool items, you should use a GENTLE/FINE WASH DETERGENT, such as Dreft, which has been tested and approved by the International Wool Secretariat and carries the Woolmark. A similar detergent should also be used for silk. To maintain the appearance of your clothes and household textiles and to make them last longer, you should use different types of detergent for different washes, whether for whites, colours or delicates. Although this may require buying two or three different products, you do not need to use any more powder, or liquid, than if you were buying just one.

BIG BOX OR COMPACT

Compared to their traditional Big Boxequivalents, compacts (or concentrates as they are also known) have an improved performance and environmental profile, as well as requiring a smaller dosage level.

FABRIC CONDITIONERS

These are ideal for improving softness. They also reduce static cling on synthetics and make ironing easier. Fabric Conditioners come in three forms: Liquids (regular or concentrated) which work in the final rinse. Sheets for use in the tumble dryer, and Combined Detergent and Fabric Softener

Reduced (Medium) Normal (Maximum) Reduced (Medium) Much Reduced (Minimum) Hand wash only
BLEACHING Chlorine bleach may be used IRONING Hot iron Warm iron Cool iron DRY CLEANING Cotten, Linen, Viscose Polyester mixtures, Wool Acrylic, Nylon, Polyester

TUMBLE DRYING

May be dry cleaned. Other letters and/or a bar beneath the circle will indicate the required process to the dry cleaner.
May be tumble dried with high heat setting with low heat setting
A cross through any symbol means DO NOT

Important Notes

For best results, always use the dispenser drawer for dispensing detergents and liquid additives. Once the dispenser has been filled, close it by pushing it in gently. This is particularly important if you are using 13 fabric conditioner to avoid the conditioner entering the machine prematurely. When using liquid detergent and a prewash programme, place the detergent into the correct compartment in the dispenser drawer, after the prewash has finished.

Washing Programmes

Programmes for cotton and linen
Wash programme Degree of soil and type of laundry White cotton, for example heavy soiled work garments, sheets, household linen, underwear, towels. White cotton, for example normally soiled work garments, sheets, household linen, underwear, towels. Fast coloured cotton or linen fabrics, shirts, underwear, towels. Non fast coloured cotton or linen fabrics, shirts, blouses, underwear. Lightly soiled laundry such as sport apparel, sheets used once. Programme dial position Description Prewash at 40 C Wash at 95 C 4 rinses Long spin at 1000 rpm Wash at 95 C 4 rinses Long spin at 1000 rpm Possible options Max. load

WHITES WITH PREWASH

4.5 kg

WHITES WITHOUT PREWASH

FAST COLOUREDS
Wash at 60 C 4 rinses Long spin at 1000 rpm Wash at 40 C 4 rinses Long spin at 1000 rpm Wash at 40 C 4 rinses Long spin at 1000 rpm

NON- FAST COLOUREDS

QUICK WASH

RINSES

Separate rinse cycle for hand washed garments
4 rinses Long spin at 1000 rpm
Separate spin for cotton and linen items

External cleaning

Clean the exterior cabinet of the appliance with soap and water only, and then dry thoroughly.
Cleaning the dispenser drawer
From time to time the washing powder and additive dispenser drawer should be cleaned. Remove the drawer by pressing the catch downwards and by pulling it out. Flush it out under a tap, to remove any traces of accumulated powder.
Cleaning the drawer recess
Having removed the drawer, use a small brush to clean the recess, ensuring that all washing powder residue is removed from the upper and lower part of the recess. Replace the drawer and run the rinse programme for a few minutes without any clothes in the drum.

Cleaning the filter

The water drain filter
A clean filter is important for the correct functioning of the machine, and should therefore be cleaned after every washing programme. Open the filter door and place a container underneath to catch any spillage. If the filter is blocked and the machine is unable to drain you will need to drain the water manually from the machine at this stage. To do this, unhook the drain hose from the standpipe or sink and hold the end of the hose over a bowl on the floor. The water should drain by gravity into the bowl. When the bowl is full, hook the hose back up and empty the bowl. Repeat the procedure until water stops flowing out. Unscrew and remove the filter. Clean carefully under a fast running tap.

Warning

When the appliance is in use and depending on the programme selected there can be hot water in the filter. Never remove the filter during a wash cycle, always wait until the appliance has finished the cycle, and is empty. When replacing the filter, ensure it is securely retightened so as to stop leaks and young children being able to remove it.

The water inlet filters

If your water is very hard or contains traces of lime deposit, the water inlet filters may become clogged. It is therefore a good idea to clean them from time to time. Turn off the water taps. Unscrew the water inlet hoses. Remove and clean the filters using a hard bristle brush. Replace the filters and tighten up the inlet hoses.

The dangers of freezing

If the machine is exposed to temperatures below 0C, certain precautions should be taken. s Turn off the water taps. s Unscrew the inlet hoses. s Unhook the drain hose from the rear support and position the end of this hose and that of the inlet hoses in a bowl. Run the draining programme. s Disconnect the appliance. s Screw the inlet hoses and reposition the drain hose. s When you intend to start the machine up again, make sure that the room temperature is above 0C.

Something Not Working

Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. Before contacting your local Service Force Centre, please carry out the checks listed below.

Symptom

The machine does not start

Possible causes

s s s s s
The door has not been closed. The plug is not properly inserted in the power socket. There is no current at the socket The main fuse has blown. The selector dial is not correctly positioned and pulled out. Ensure the water taps are open. The filters in the inlet hoses are blocked. The inlet hoses may be squashed or kinked. The door has not been closed. The end of the drain hose is too low. The end of the drain hose is submerged in water. There is no vent in the end of the drain hose. The drain hose may be squashed or kinked. The RINSE HOLD option has been selected. The drain filter may be blocked. The drain hose extension is not correct. Follow the instructions for connecting to the waste. The drainage system pipes are blocked. The wash load is unbalanced: redistribute the clothes inside the drum to allow the machine to spin. Too much detergent or unsuitable detergent has been used (creates too much foam). Check whether there are any leaks from one of the inlet hose(s) fittings. It is not always easy to see this as the water runs down the hose; check to see if it is damp. The drain hose may be damaged or not securely positioned. The detergent dispenser drawer or recess is clogged. The drainage system pipes are blocked. Too little detergent or unsuitable detergent has been used. An insufficient amount of detergent leaves the laundry looking grey and causes lime scale to form. Stubborn stains have not been treated prior to washing The correct wash programme has not been selected. Too much laundry has been placed in the drum. The internal packing has not been removed. The machine is in contact with the wall or furniture. The machine is not level. The washing load is badly distributed in the drum. Maybe there is very little laundry in the drum.
The machine does not fill

s s s s

The machine fills then empties immediately The machine does not empty and/or does not spin

s s s s s s s s s

There is water on the floor
Unsatisfactory washing results
The machine vibrates when spinning

The door will not open

The programme is still running. The door lock has not yet released (door pilot light on). Water in the tub: the door cannot be opened if water is present in the tub. The electronic unbalance detection device has cut in because the laundry is not evenly distributed in the drum. The laundry is redistributed by reverse rotation of the drum. This may happen several times before the unbalance disappears and normal spinning can resume. If, after 10 minutes, the laundry is still not evenly distributed in the drum, the machine will not spin. In this case, redistribute the load manually and reselect the spin programme. The machine is fitted with a type of motor which makes an unusual noise compared with other traditional motors. This new motor ensures a softer start and more even distribution of the laundry in the drum when spinning, as well as increased stability of the machine. Machines based on modern technology operate very economically using very little water without affecting performance.
Spinning starts late or the machine does not spin
The machine makes an unusual noise
No water is visible in the drum
If after all these checks, the problem persists, contact your local Service Force Centre, quoting the model and serial number. This information can be found on the rating plate (see picture). Please note that it will be necessary to provide proof of purchase for any in-guarantee service calls. In-guarantee customers should ensure that the above checks have been made as the engineer will make a charge if the fault is not a mechanical or electrical breakdown.

Mod.. Ser.

Mod.. Prod. No.

Ser. No.

Service and Spare Parts
If you require an engineer or assistance with your appliance, please call our customer care department:

0990 929929

This product should be serviced by an authorised Service engineer, and only genuine spare parts should be used. Under no circumstances should you attempt to repair the machine yourself. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact your local Service Force Centre. Always insist on genuine spare parts.
Peace of Mind for Twelve Months
Zanussi standard guarantee conditions
This guarantee is in addition to your statutory and other legal rights. We, Zanussi, undertake that if, within 12 months of the date of the purchase, this ZANUSSI appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option, repair or replace the same FREE OF ANY CHARGE for labour, materials or carriage on condition that: s The appliance has been installed correctly and used only on the electricity supply stated on the rating plate. s The appliance has been used for normal domestic purposes only, and in accordance with the manufacturers operating and maintenance instructions. s The appliance has not been serviced, maintained, repaired, taken apart or tampered with, by any person not authorised by us. All service work under this guarantee must be undertaken by a Zanussi service representative or authorised agent. Any appliance or defective part replaced shall become our property. Home visits are made between 8.30am and 5.30pm Monday to Friday. Visits may be available outside these hours in which case a charge will be made.

Exclusions

This guarantee does not cover: s Damage or calls resulting from transportation, improper use or neglect, the replacement of any light bulbs or removable parts of glass or plastic. s Costs incurred for calls to put right an appliance which is improperly installed or calls to appliances outside the United Kingdom. s Appliances found to be in use within a commercial environment, plus those which are subject to rental agreements. s Products of Zanussi manufacture which are NOT marketed by Zanussi Ltd.
Zanussi European guarantee
If you should move to another country within Europe then your guarantee moves with you to your new home subject to the following qualifications: s The guarantee starts from the date you first purchased your product. s The guarantee is for the same period and to the same extent for labour and parts as exists in the new country of use for this brand or range of products. s The guarantee relates to you and cannot be transferred to another user. s Your new home is within the European Community (EC) or European Free Trade Area. s The product is installed and used in accordance with our instructions and is only used domestically, i.e. a normal household. Before you move please contact your nearest Customer Care Centre, listed below, to give them details of your new home. They will then ensure that the local Service Organisation is aware of your move and able to look after you and your appliances. France Senlis +33 (0)Germany Nurnberg +49 (0)2600 Italy Pordenone +39 (0)Sweden Stockholm +46 (0)UK Newbury +44 (0)1635 521313
Installation Instructions
It is dangerous to alter the specifications or attempt to modify this product in any way. Care must be taken to ensure that the appliance does not stand on the electrical supply cable. Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person.

Technical Specifications

DIMENSIONS Height Width Depth 85 cm (33.5) 60 cm (23.6) 54 cm (21.2) 220-240 V/50 Hz 2550 W (13A) Minimum (hot) Minimum Maximum Cotton, linen Synthetics Delicate fabrics Wool Maximum 0.35 bar (3.5 N/cm2) 0.48 bar (4.8 N/cm2) 07.6 bar (76 N/cm2) 4,5 kg (10 lbs) 2 kg (4.5 lbs) 2 kg (4.5 lbs) 1 kg (2.2 lbs) 1000 rpm POWER SUPPLY VOLTAGE TOTAL POWER ABSORBED WATER PRESSURE MAXIMUM RECOMMENDED LOAD

Water drainage

This appliance is designed to be permanently plumbed into your home's water supply and drainage system. The appliance drain hose should hook into a standpipe with an internal diameter of approximately 38mm (see diagram) thus ensuring there is an air break between the drain hose and standpipe. When discharging into a standpipe ensure that the top of the curve in the hose end is no more than 90cm (35.4'') and no less than 60cm (23.6'') above floor level. The upright standpipe should have a minimum length of 30cm (12'') from the bottom of the elbow to the top of the pipe (see diagram). Make sure that it is designed in such a way, that the end of the drain hose cannot be covered with water. The drain hose may be extended to a maximum of 4 metres. An additional drain hose and joining piece is available from your local Service Force Centre. The joining piece must have an internal diameter of 18mm.

Max. 90 cm.(35.4")

Min. 30 cm.(12")
mm.(1/2") diameter standpipe

Min.60 cm. (23.6")

Important
Before connecting up the machine to new pipework or to pipework that has not been used for some time, run off a reasonable amount of water to flush out any debris that may have collected in the pipes.

Levelling

Level the washing machine by raising or lowering the feet. The feet may be tight to adjust as they incorporate a self locking nut, but the machine MUST be level. Any necessary adjustment can be made with a spanner. Accurate levelling prevents vibration, noise and displacement of the machine during operation. Some vibration is inevitable, especially if mounted on a wooden floor. Sprung wooden floors are particularly susceptible to vibration. For advice, consult a builder. If possible, always place the machine on a solid floor.

Special conditions

If the floor is carpeted or covered with crumbly or soft material, insert a rigid support base under the feet to prevent noise, vibration or displacement. The base should protrude a few centimetres beyond the edges of the machine. Warning The machine should NOT be placed on deep pile carpeting. Note Please ensure that when the appliance is installed it is easily accessible for the engineer in the event of a breakdown.

Washing machines and dishwashers should be connected to the FOUL drainage system, the water will then be taken to a sewage works for treatment before being discharged safely into a river. It is essential that these appliances are not connected to the surface water drainage system as this water is discharged directly into a river or stream and may cause pollution. If you require any further advice please contact your local authority drainage department.
SHOWER SINK BATH TOILET BIDET
WASHING MACHINE RAINWATER 'RUN-OFF'

DISHWASHER

FOUL DRAIN SURFACE WATER DRAINS & SEWERS FOUL SEWERS

UNTREATED DISCHARGE

SEWAGE TREATMENT WORKS TREATED DISCHARGE

Electrical connection

Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. WARNING: THIS APPLIANCE MUST BE EARTHED. The manufacturer declines any liability should this safety measure not be observed. Before switching on, make sure the electricity supply voltage is the same as that indicated on the appliances rating plate. The rating plate is located at the top of the rim of the open door. The appliance is supplied with a 13amp plug fitted. In the event of having to change the fuse in the plug supplied, a 13amp ASTA approved (BS1362) fuse must be used. Should the plug need to be replaced for any reason, proceed as described below. The wires in the mains lead are coloured in accordance with the following code: Green and Yellow - Earth Blue - Neutral Brown - Live The wire coloured green and yellow must be connected to the terminal marked with the letter E or by the earth symbol or coloured green and yellow. The wire coloured blue must be connected to the terminal N or coloured black. The wire coloured brown must be connected to the terminal marked L or coloured red. Upon completion there must be no cut, or stray strands of wire present and the cord clamp must be secure over the outer sheath. WARNING: A cut off plug inserted into a 13 amp socket is a serious safety (shock) hazard. Ensure that the cut off plug is disposed of safely.

GREEN & YELLOW

E 13 A N L

BROWN BLUE

CORD CLAMP

Permanent connection

In the case of permanent connection it is necessary that you install a double pole switch between the appliance and the electricity supply (mains), with a minimum gap of 3mm between the switch contacts and of a type suitable for the required load in compliance with the current electrical regulations. The switch must not break the yellow and green earth cable at any point.