DISHWASHER IZZI

152975 75/0

INSTRUCTION BOOK

Contents
Important safety information Description of the appliance The control panel Before use Setting the water softener Rinse aid Use of detergent Using your appliance Loading your appliance The lower basket The cutlery basket The upper basket Adjusting the height of the upper basket Hints and tips Washing programmes Operating sequence Maintenance and cleaning Something not working Service and Spare Parts Customer Care Department Guarantee Conditions Installation instructions Water supply connections Water outlet hose connection Electrical connection Fitting under a counter Levelling Hints for test centres 15 15

Technical specifications

Dimensions Width Height with working top Height without working top Max depth Max depth with open door Voltage 82 63.7 115.2 cm cm cm cm cm
Electrical connection Motor rating during wash Power of heating element Overall power Water supply pressure
220/240 V - 50 Hz 200 W 2100 W 2300 W 50 kPa (0.5 bar) 800 kPa (8 bar) 12 place settings

Minimum Maximum

Capacity
This appliance complies with the following E.E.C. Directives: - 73/23 or 19.2.73 (Low Voltage Directive) and subsequent modifications; - 89/336 or 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications. 2
Important safety information
It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information. This information has been provided in the interest of your safety. You MUST read it carefully before installing or using the appliance.

Installation

q q q q

q q q q q q

This appliance is heavy. Care should be taken when moving it. It is dangerous to alter the specifications or attempt to modify this product in any way. Care must be taken to ensure that the appliance does not stand on the electrical supply cable. Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person.

Child Safety

This appliance is designed to be operated by adults. Children should not be allowed to tamper with the controls or play with the product. Keep all packaging well away from children. Keep all detergents in a safe place out of children's reach.
Long bladed knives stored in an upright position are a potential hazard. Long and/or sharp items of cutlery such as carving knives must be positioned horizontally in the upper basket. When finishing loading or unloading close the door, as an open door can be a hazard. Do not sit or stand on the open door. Isolate the appliance from the power supply and turn off the water supply after use. Care should be taken when cleaning the bottom door seal and hinge area as any exposed metal edges may cut if care is not taken. This product should be serviced by an authorised Service engineer, and only genuine spare parts should be used. Under no circumstances should you attempt to repair the machine yourself. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact your local Service Force Centre. Always insist on genuine spare parts.

Conservation During Use

In the interest of the environment:
Items that are contaminated by petrol, paint, steel or iron debris, corrosive, acidic or alkaline chemicals must not be washed in this dishwasher. Under no circumstances should you open the door whilst the appliance is in operation. Always turn off the appliance before opening the door. Only use detergent specifically designed for use in dishwashers.
Materials marked with the symbol are recyclable. Check with your local Council or Environmental Health Office to see if there are facilities in your area for re-cycling this appliance. When the appliance is to be scrapped, cut off the power supply cable and make the door closing device unusable to prevent young children from being trapped inside. Help to keep your country tidy - use authorised disposal sites for your old appliance.
Description of the appliance
1. 2. 3. 4. 5. 6. 7. 8. 9. Levelling spacers Upper basket stop Salt container Large filter Detergent dispenser Control panel Rating plate Rinse aid dispenser Central filter
10. Lower spray arm 11. Upper spray arm 12. "SID" detergent dispenser (Super Intensity Dispenser) 13. Upper basket 14. Worktop

The control panel

1. On/Off push button
(with integrated indicator light)
2. Door handle 3. Programme selection push buttons
DAILY 30I programmme push button
65 NORMAL and 50 ECO programme push button This push button allows the selection of 2 programmes and has 2 integrated indicator lights. q The upper light corresponds to the 65 NORMAL programme: this programme is memorized and, without depressing this push button, the start of the programme will occur after 6 seconds from the pressure of the On/Off push button. In this time it is possible to change programme simply pressing the push button of another programme.
The lower light corresponds to the 50 ECO programme. To activate this programme it is necessary to depress the pushbutton.
70 INTENSIVE SID 80 programme push button

Before use

Before using your dishwasher for the first time:
1. Ensure that the electrical and water connections comply with the installation instructions 2. Remove all packaging from inside the appliance 3. Set the water softener 4. Pour 1 litre of water inside the salt container and then fill with salt 5. Fill the rinse aid dispenser. The current level is indicated by the number of flashes made by the push button 1 indicator light, that alternates 5 seconds off with a number of flashes, this for about 60 seconds. Example: 1 flash 2 flashes 3 flashes 4 flashes 5 flashes = = = = = level level level level level 5

Setting the water softener
The dishwasher is equipped with a water softener designed to
remove minerals and salts from the water supply, which would have a detrimental or adverse effect on the operation of the appliance. The higher the content of these salts, the harder your water is. Water hardness is measured in equivalent scales, Clarke degrees, French degrees and PPM (parts per Million). The softener should be adjusted according to the hardness of the water in your area. Your local Water Authority can advise you on the hardness of the water in your area. Water hardness Level Clarke degrees <- - - - 63 French degrees
4. To change the level, press the programme push button 1. Each time the push button is pressed the level changes. Example: If the current level is 3, by pressing the programme push button 1 once, level 4 is selected. If the current level is 5, by pressing the programme push button 1 once, level 1 is selected. The push button 1 indicator light remains off for about 5 seconds after which it starts flashing indicating the new level selected. 5. To memorise the new level, switch off the dishwasher by pressing the On/Off push button.

(Parts per Million)

Use of salt NO YES YES YES YES

Filling with salt

Only use salt specifically designed for use in dishwashers. All other types of salt not specifically designed for use in a dishwasher, especially table salt, will damage the water softener. Only fill with salt just before starting one of the complete washing programmes. This will prevent any grains of salt or salty water, which may have been spilled, remaining on the bottom of the machine for any period of time, which may cause corrosion.

<- - - - 90

< - - - - 900
The dishwasher is factory set at level 3. If this level is not suitable for your area the softener should be adjusted.

To fill:

1. To fill with salt, unscrew the cap of the salt container. 2. Pour 1 litre of water inside the container (this is necessary only before filling with salt for the first time). 3. Using the funnel provided, pour in the salt until the container is full. Do not worry if water over flows from the unit when filling with salt, this is quite normal. 4. Replace the cap making sure that there is no trace of salt on the screw thread or on the gasket. 5. Screw on the cap tightly. The salt container will require topping up periodically. The salt cap has a refill indicator window in the centre. A green float is clearly visible when there is salt inside the container, and almost disappears when the salt has finished reminding you to add salt. 5

LE SA LT SA LZ SA L SE

To select a different level be sure that the dishwasher is off and then proceed as follows:
1. Press 1 and 3 programme push buttons simultaneously. 2. While keeping the programme push buttons 1 and 3 pressed switch on the dishwasher by pressing the On/Off push button.The On/Off indicator light comes on. At the same time the programme push buttons 1 and 3 start flashing. 3. Press the push button 1, the indicator light of the push button 3 turns off, while the indicator light of the push button 1 remains fixed for about 5 seconds and then starts flashing indicating the current level of the water softener.

Rinse aid

Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying. The dispenser, which is positioned inside the door, holds about 110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing programmes, depending upon the dosage setting.

Use of detergent

Only use detergents specifically designed for use in dishwashers. We recommend the use of Finish detergents which are available in the following options: Finish Double Action Tablets. Each tablet has the exact amount of detergent required, simply place in the dispenser. Finish Powder recommended for every day use. Finish Liquid Gel ideal for every day use. As the gel is extra gentle it is recommended for fine bone china.

Filling with rinse aid

1. Open the container by turning the lid (A) anticlockwise. 2. Add the rinse aid until the container is completely full. The indicator (B) will be completely dark. 3. Top up the rinse aid when the indicator (B) becomes clear.
If using powder detergents proceed as follows:
1. Open the dispenser lid by pulling the catch (D). 2. Add the detergent according to the instructions given in the Washing programmes chart. As all detergents are not the same, you should also consult the instructions on the packet. 3. Always close the lid. 4. If the programme has a prewash add a little amount of detergent in the SID detergent dispenser, located in the centre of the upper basket. Follow the recommended quantity of detergent given in the Washing programmes chart.
Ensure that the lid is closed after every refill. Do not put liquid detergent in the rinse aid compartment. Clean up any rinse aid spilt during filling with an absorbent cloth to avoid excess foaming during the next wash.

Adjusting the dose

According to the finish and drying results obtained, adjust the dose of rinse aid by means of the 6 position selector (C) (position 1 minimum dosage, position 6 maximum dosage). Increase the dose if there are drops of water or lime spots on the dishes after washing. Reduce it if there are sticky whitish streaks on the dishes.

The cutlery basket is in two parts which can be separated to give greater loading flexibility. To separate the two parts, slide them horizontally in opposite directions and pull them apart.
To reassemble, reverse the procedure.

The upper basket

The upper basket is designed for plates (dessert plates, saucers, dinner plates of up to 25 cm in diameter), salad bowls, cups and glasses. Arrange items so that water can reach all surfaces. Glasses with long stems can be placed upside down in the cup racks. Light items (plastic bowls etc.) should be loaded in the upper basket and arranged so they do not move.
Adjusting the height of the upper basket
If washing very large plates (over 27 cm and up to 32 cm in diameter) you can load them in the lower basket after moving the upper basket to the higher position. To move to the higher position proceed as follows: 1. Move the front runner stops (A) of the upper basket outwards and slide the basket out. 2. Refit the basket in the higher position and replace the stops (A) in their original position.
In case that plates are loaded in the upper basket:
load them starting from the rear positions of the basket, tilting them forwards and avoiding the front positions near the door.
When the top basket is in the higher position it will only take plates up to 20 cm in diameter and you will not be able to use the cup racks. Attention! After loading your machine always close the door, as an open door can be a hazard.
Attention! Before closing the door, ensure that the spray arms can rotate freely.

Hints and tips

To save energy
Place dishes in the machine immediately after every meal and wait until the dishwasher is full before washing. Do not prewash dishes under running water. Select the DAILY 30I programme when dishes are not very soiled, following the instructions given in the "Washing programmes" chart.
Items not suitable for dishwashers
The following items should not be washed in the dishwasher (unless they are sold as dishwasher proof): - Cutlery with wooden or horn handles or glued parts - bronze cutlery - saucepans with wooden handles - aluminium ware - crystal ware - leaded glass - plastic items - antique or fine decorated china Certain types of decoration can discolour when washed in a dishwasher. Crystal-ware and plastic objects, if not guaranteed dishwasher proof should be washed by hand. Certain types of glass can also become opaque after being washed several times in a dishwasher. A chemical reaction can occur between silver cutlery and stainless steel cutlery. As a precaution, do not wash together. Iron and cast iron objects can rust and stain other items. Aluminium tends to go black, copper, pewter and brass tend to stain. If in doubt check with manufacturer of the item. When buying new dishes, ensure that they are dishwasher proof.

For best washing results

Before loading, remove all scraps of food and soak very heavily soiled pots and pans. Arrange saucepans, cups and glasses etc. upside-down. Tilt items with convex or concave surfaces so that the water drains off easily. Avoid contact between the dishes as far as possible.

Washing programmes

Type of load Degree of soil Required push buttons Recommended quantity of detergent wash Fresh soil. Crockery and cutlery On/Off + 20 g / prewash Cycle description

* DAILY 30

Main wash up to 60C 1 hot rinse

65 NORMAL

Normal soil. Crockery and cutlery

On/Off

Cold prewash Main wash up to 65C 1 cold rinse 1 hot rinse Active dry Cold prewash Main wash up to 50C 1 cold rinse 1 hot rinse Active dry Hot prewash Main wash up to 70C 1 cold rinse 1 hot rinse Active dry

** 50 ECO

On/Off +

*** INTENSIVE 70

SID 80I
Heavy soil. Crockery, cutlery, pots and pans
Ideal for washing crockery and cutlery of breakfast and dinner (fresh soil). Characterised by a duration of about 30 minutes and a washing temperature of 60C. The time value is approximate and depends on the pressure and the temperature of the water and also by the variations of the power supply. This is the perfect daily programme, made to meet the needs of a family of 4 persons who only wish to load breakfast and dinner crockery and cutlery. enzymes, allows to achieve, with reduced conssumptions of energy the same cleaning results that would otherwise be obtained only with the 65C programmes and conventional detergents. To compensate the lower temperature, the duration of the programme has been prolonged.
** Testing programme for EN 50242 (see "Hints for Test Centres). This programme, developed for the use of detergents with
*** Ideal for washing a complete load of 12 place settings with heavy soil.
Characterised by a duration of about 80 minutes and a washing temperature of 70C. The time value is approximate and depends on the pressure and the temperature of the water and also by the variations of the power supply.

Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. The dishwasher is fitted with an alarm system which can help you to quickly determine the cause of any problems. The dishwasher will not start or stops during operation, all push buttons are inoperative except for the On/Off push button and the indicator light of the running programme is flashing. Press the On/Off push button to switch off the dishwasher and carry out the following suggested corrective actions listed below. Once the checks have been carried out switch on the dishwasher and start a washing programme, if the fault code reappears in the digital display, contact your local Service Force Centre. Important: If you call out an engineer to a fault listed below or to repair a fault caused by incorrect use or installation a charge will be made, even if the appliance is in guarantee.

Symptom

The machine will not start

Fault code

Solution
The door has not been properly closed. The plug is not properly inserted in the power socket. There is a power failure. Ensure the water tap is open. Ensure the mains water supply has not been cut off. The inlet hose may be squashed or bent. Reposition the hose. The inlet hose may be blocked. Switch off the water supply and clean the filter. The drain hose may be squashed or bent. Reposition the hose. The sink may be blocked. Clear any blockages. The drain hose extension is not correct. Follow the instructions for connecting to the waste. There is no vent in the end of the drain hose. Switch off the dishwasher. Switch it back on and start the programme. If the alarm reappears, call the local Service Force Centre. Dishes are rattling against each other, refer to Loading your machine. The spray arms are knocking against the dishes. Refer to "Loading your machine". The dishwasher is not level, or not properly built-in. Check that there is salt and that the salt cap is tight. Check that the right level of the water softener is set. The rinse aid has run out or too little is being used. The baskets are too full. The dishes have not been arranged properly. The spray arms do not rotate The spray arms are clogged. The filters are clogged. The filters are not in the correct position. Not enough detergent has been used or it is unsuitable. The detergent is old or has gone hard. The salt container cap is not properly closed. The washing programme selected is too gentle.

The machine does not fill with water
Running programme indicator light flashes
The dishwasher will not drain

General

The machine is noisy
The door is difficult to close Visible lime deposits or white film on the dishes The dishes are not quite dry The dishes are not clean (poor wash)
q q q q q q q q q q q q q q
If after all these checks, the problem persists, contact your local Service Force Centre, quoting the model and serial number. This information can be found on the rating plate located on the right hand side of the dishwasher door (see picture).

Prod.No. Ser. No. Mod.

Service and Spare Parts
In the event of your appliance requiring service, or if you wish to purchase spare parts please contact your local Service Force Centre by telephoning: Home visits are made between 8.30am and 5.30pm Monday to Friday. Visits may be available outside these hours in which case a premium will be charged.

08705 929929

Your telephone call will be automatically routed to the Service Force centre covering your post code area. For the address of your local Service Force Centre and further information about Service Force, please visit the website at www.serviceforce.co.uk Before calling out an engineer, please ensure you read the details under the heading Something not working. When you contact the Service Force Centre you will need to give the following details: 1. Your name, address and post code 2. Your telephone number 3. Clear and concise details of the fault 4. The model and serial number (found on the rating plate) 5. The purchase date Please note that a valid purchase receipt or guarantee documentation is required for in-guarantee service calls.

Exclusions

This guarantee does not cover:
Damage or calls resulting from transportation, improper use or neglect, the replacement of any light bulbs or removable parts of glass or plastic. Costs incurred for calls to put right an appliance which is improperly installed or calls to appliances outside the United Kingdom. Appliances found to be in use within a commercial environment, plus those which are subject to rental agreements. Products of Zanussi manufacture which are not marketed by Zanussi.

European Guarantee

If you should move to another country within Europe then your guarantee moves with you to your new home subject to the following qualifications:
The guarantee starts from the date you first purchased your product. The guarantee is for the same period and to the same extent for labour and parts as exists in the new country of use for this brand or range of products. This guarantee relates to you and cannot be transferred to another user. Your new home is within the European Community (EC) or European free Trade Area. The product is installed and used in accordance with our instructions and is only used domestically, i.e. a normal household. The product is installed taking into account regulations in your new country.

Customer Care Department

For general enquiries concerning your Zanussi appliance or for further information on Zanussi products please contact our Customer Care Department by letter or telephone at the address below or visit our website at www.zanussi.co.uk Customer Care Department Zanussi 55-77 High Street Slough Berkshire SL1 1DZ Tel: (*)
* calls to this number may be recorded for training purposes
Before you move please contact your nearest Customer Care centre, listed below, to give them details of your new home. They will then ensure that the local service Organisation is aware of your move and able to look after you and your appliances. France Senlis Stockholm Nurnberg Slough Pordenone +33 (0) 29 +46 (0) +49 (0) 7378 +44 (0) +39 (0) 4700

Guarantee Conditions

Standard guarantee conditions
We, Zanussi, undertake that if within 12 months of the date of purchase this Zanussi appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF CHARGE for labour, materials or carriage on condition that:

Sweden Germany UK Italy

Ireland

Dublin

+353 (0) 14090753
The appliance has been correctly installed and used only on the electricity supply stated on the rating plate. The appliance has been used for normal domestic purposes only, and in accordance with the manufacturers instructions. The appliance has not been serviced, maintained repaired, taken apart or tampered with by any person not authorised by us. All service work under this guarantee must be undertaken by a Zanussi Service Force Centre. Any appliance or defective part replaced shall become the Companys property. This guarantee is in addition to your statutory and other legal rights.
Installation instructions
Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person. Remove all packaging before positioning the machine. If possible, position the machine next to a water tap and a drain. If you use a drain hose extension it must be no longer than 2 metres and its internal diameter must be no smaller than the diameter of the hose provided. Likewise the internal diameter of the couplings used for connections to the waste outlet must be no smaller than the diameter of the hose provided.

Water supply connections

This dishwasher must be plumbed into a cold water supply. The water pressure must be within the limits given in the technical specifications (page 2). Your local Water Authority will advise you on the average mains pressure in your area. The dishwasher features fill and drain hoses which can be turned either to the left or the right to suit the installation. The locknut must be correctly fitted to avoid water leaks. Do not use, for the connection, old hoses which have been used in another appliance. Avoid bends or kinks in the hose which could prevent or slow down the water supply. If the machine is connected to new pipes or pipes which have not been used for a long time, you should run the water for a few minutes before connecting the inlet hose. This will prevent deposits of sand or rust clogging the inlet hose filter.

18 21

+ 2 m max

Electrical connection

This appliance must be earthed. The manufacturer declines any responsibility should this safety measure not be observed. If the plug that is fitted to your appliance is not suitable for the socket, it must be cut off and the appropriate plug fitted. Important The wires on the mains lead are coloured in accordance with the following code: Green and Yellow - Earth - Neutral - Live Blue Brown
Water outlet hose connection
The end of the drain hose can be connected in the following ways: 1. To the sink outlet spigot, securing it if necessary with a clip. 2. Hooked over the edge of the sink using the special curved plastic guide provided. 3. To a stand pipe provided with vent-hole, minimum internal diameter 4 cm.

min 4 cm

If you fit your own plug, the colours of the wires in the mains lead of your appliance may not correspond with the markings identifying the terminals in your plug.

E 13 A N L

21 18

max 100 cm

The waste connection must be at a height of between 30 cm (minimum) and 100 cm (maximum) from the bottom of the dishwasher. The drain hose can face either to the right or left of the dishwasher Ensure the hose is not bent or squashed as this could prevent or slow down the discharge of water. The sink plug must not be in place when the machine is draining as this could cause the water to siphon back into the machine. Attention! Our appliances are supplied with a security device to protect against the return of dirty water back into the machine. If the spigot of your sink has a "no return valve" incorporated this can prevent the correct draining of your dishwasher. We advise you therefore to remove it. 14

min 30 cm max 100 cm

Proceed as follows: 1. Connect the Green and Yellow (earth) wire to the terminal in the plug which is marked with the letter "E" or the earth symbol or coloured green and yellow. 2. Connect the Blue (neutral) wire to the terminal in the plug which is marked with the letter "N" or coloured black. 3. Connect the Brown (live) wire to the terminal in the plug which is marked with the letter "L" or coloured red. The plug moulded onto the lead incorporates a 13amp BSI362 fuse. Only ASTA or BSI fuses should be used. The plug must not be used if the fuse cover/carrier is lost. The cover/carrier is indicated by the coloured insert at the base of the plug. A replacement cover/carrier must be obtained from your local Service Force Centre.

Fitting under a counter

(kitchen worktop or sink)
By removing the machines worktop, you can install it under a close fitting sink unit or a pre-existing top, providing the dimensions of the recess correspond to those shown in the picture. Proceed as follows: -Remove the machines worktop by unscrewing the two rear retaining screws, pull from the front and slide out the rear slots, lifting the worktop.

570 - 600

Levelling
Good levelling is essential for correct closure and sealing of the door. When the appliance is correctly levelled, the door will not catch on the levelling spacers on either side of the cabinet. If the door does not close correctly, loosen or tighten the adjustable feet until the machine is perfectly level.
Insert the machine after adjusting height and levelling with the adjustable feet. When inserting the machine, ensure that the water inlet and drain hoses are not kinked or squashed.

Hints for test centres

Before starting any test it is necessary to fill completely with salt the salt container and with rinse aid the rinse aid dispenser.
Test standard Reference programme: Load: Rinse aid selector: Detergent dosage :
EN ECO 12 standard place settings position g in the dispenser 5 g on the dispenser lid

Arrangement upper basket

Arrangement lower basket
Arrangement cutlery basket
Arrangement knife basket 15

From the Electrolux Group. The worlds No.1 choice.
The Electrolux Group is the worlds largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx. 14 billion USD in more than 150 countries around the world.

0 01/02

Subject to change without notice
Electrolux Household Appliances Limited 2002

47830 GA Safety Notice Guardian 180x112m

14/6/07

11:22 am

Page 1

WARNING IMPORTANT SAFETY NOTICE

DISHWASHERS

OWNERS OF THE ABOVE APPLIANCES MUST ACT IMMEDIATELY ON THIS SAFETY NOTICE.
Our quality control programme has identified that a purchased connector component presents a potential risk of fire in some series of AEG-Electrolux and ZANUSSI-Electrolux dishwashers. No product bought before July 2006 is affected. Models with this potential problem are listed in the table below. The Model (Mod), PNC and Serial Number (S.N.) of the dishwasher are printed on the rating plate on the right side of the dishwasher door as indicated in the drawing below. The location of the rating plate is also shown in the user guide that came with the appliance. If the model number matches one in the table below and falls into the given serial range then the dishwasher is an affected model. Brand AEG-Electrolux Model (Mod) F50765 F50765 ZSF6161 ZSF6161 S ZDF501 ZANUSSI-Electrolux ZDF501 S IZZI ALU ZSF6161 N ZSF6161 X PNC 911916265
Mod. PNC S.N. ZDF 911 YYY 627 ZZZ Type 2202200V
Only the following serial numbers are affected: 62700001 to 64099999 and 70800001 to 71699999 Consumers owning one of these dishwashers should contact our Hotline on between 8.00am and 6.00pm Monday to Friday, or between 9.00am and 5.00pm Saturday and Sunday, or complete the Freepost coupon below in order to arrange for a free-of-charge visit from a service engineer to rectify the fault. Please note: If you are the owner of an affected model you must stop using your dishwasher and switch off the appliance. This safety notice does not affect any other AEG-Electrolux or ZANUSSI-Electrolux appliance. We apologise for any inconvenience this may cause and thank you for your co-operation.
To: FREEPOST RRKT-SHRK-EXKS, Electrolux Helpline, 1 Stoke Road, Slough, SL2 5AH Name... Model. No.... Address........... Postcode...
Home Tel. No..... Daytime Tel. No.....