Contents

For the User
Important Safety Information Your New Washer-Dryer Description of the Appliance
Door locked light Detergent dispenser drawer 5 6-10

Maintenance and Cleaning

Descaling After each wash Maintenance wash External cleaning Cleaning the dispenser drawer Cleaning the drawer recess Cleaning the filter The dangers of freezing
The Control Panel Operating sequence

20-21 22-24 25-26

11-14 Washing 11 Load the laundry 11 Measure out the detergent 11 Measure out the fabric softener 11 Switch the machine on 11 Select the required programme/fabric 11 Select the temperature 12 Select the spin speed or the RINSE HOLD option 12 Select the desired options 12 Select the DELAY TIME 12 Start the programme 12 How to change a programme during its cycle 13 How to cancel a programme during its cycle 13 How to open the door during the cycle of a programme 13 End of programme 13 Drying 2.5 kg of cotton 14 Autodrying 2 kg of synthetics 19
Something Not Working Service and Spare Parts Guarantee Conditions Zanussi Service Force

For the Installer

Installation Instructions Technical Specifications
Unpacking Positioning Water inlet Water drainage Levelling Special conditions In the interest of the environment Electrical connection 30 31

Washing and Drying Hints

Which detergent to use?. And in which form?
Wash Care Symbols Washing Programmes Drying Programmes
Guide to use the Instruction Book
The following symbols will be found in the text to guide you throughout the instructions:
Safety instructions Hints and tips Environmental information

Your New Washer-Dryer

Your new washer-dryer, fitted with the Zanussi JET SYSTEM, meets all modern requirements for effective treatment of laundry with low water, energy and detergent consumption. Even small loads are washed economically because the amount of water used is regulated automatically according to the load and type of fabric. It is gentle with your laundry, simple to use and easy to care for.
The special wool programme with its new delicate wash system treats your woollens with extreme care. The anti-unbalance device ensures that the machine remains stable when spinning. Automatic cooling of the wash water to 60C before draining, with the 90C programme. This reduces thermal shock to fabrics, helping to prevent creasing. The two drying programmes will give your wash that soft, relaxed feel whatever the weather.

In the interest of the environment

Ecological hints

To save water and energy and help protect the environment, we recommend that you follow these hints: G Adjust the quantity of detergent according to the hardness of your water supply, the amount of laundry and the degree of soiling. G Select a Quick programme for lightly soiled laundry. G A programme without prewash is sufficient for normally soiled laundry. G Try to load the maximum drying capacity of the machine as small loads are uneconomical. G Always load well spun laundry. The higher the spin speed, the lower the electricity consumption and the shorter the drying times.
Materials marked with the symbol are recyclable. Check with your local Council or Environmental Health Office to see if there are facilities in your area for re-cycling this appliance. When the appliance is to be scrapped, cut off the power supply cable and make the door lock device unusable to prevent young children from being trapped inside. Help to keep your country tidy - use authorised disposal sites for your old appliance.
How do we help to protect the environment? We use recycled paper!

Important

Your machine is fitted with a balance control device, which ensures the machine is stable during the spin. If the wash load appears not to have been spun sufficiently at the end of the wash cycle, because it is not evenly distributed in the drum, the balance control device may have operated. It will therefore be necessary to redistribute the wash load manually and select a spin programme. For more detailed information see the section headed "Something Not Working".
Description of the Appliance
1 Detergent dispenser drawer 2 Control Panel 3 Door locked light 4 Door opening handle 5 Filter 6 Adjustable feet

Door locked light

It stays on during the whole programme indicating that the door is locked. When the light goes out, the door can be opened (see page 13).
Detergent dispenser drawer
Prewash Main wash Fabric softener

The Control Panel

FA B RIC S

IN S PEED

TIO N S

A U T O D RY

IN G TI M E

S TA R

T / PA U S E

RE SET

111213

1 ON/OFF button

Press this button to switch the machine on. The display (9) will show three blinking dashes or a blinking zero. You will find more detailed explanations on page 7 (see DISPLAY). Press the ON/OFF button again to switch the machine off.

9 Display

The following pieces of information are shown on the display: Three blinking dashes, when a programme is cancelled by means of the SKIP/RESET button. The three blinking dashes will also appear when you press the ON/OFF button to switch the machine on, if the previously selected cycle has been erased.
-- Duration of washing programme in hours and minutes, after you have selected a programme.

7 AUTO DRY button

This button allows you to choose the required degree of drying for cottons and synthetics: - Extra dry (only for cottons) - Store dry (cottons and synthetics) - Iron dry (only for cotton) The drying time is automatically adjusted by the machine: the laundry will be dried to the selected degree of dryness. 7 While the programme is running (after you have pressed the START/PAUSE button), the displayed time value decreases by one unit every minute.
Selected drying time in minutes or hours and minutes.
The delay time is displayed for 3 seconds, then the duration of the selected programme reappears. After you have pressed the START/PAUSE button, the countdown begins, and the delay time value decreases by one unit every hour. You can delay the start of the selected programme by up to 24 hours in one hour intervals. An incorrect option selection has been made: this is indicated by the message Err when a function incompatible with the current programme is selected.
After the programme has started the time remaining is updated every minute. The washing machine has stopped with water in the tub, at the end of a programme with the RINSE HOLD option: this is indicated by a static zero. The washing machine has completed the programme: this is indicated by a blinking zero. At the same time, the door locked light goes out. The zero will reappear when you switch the washing machine on, unless the previous programme has been erased by means of the SKIP RESET button.
The incorrect selection is also indicated by an audible warning signal. An alarm code indicates a fault in the machine operation (see the relevant chapter on page 23-24).
Important! The first time you use the washing machine, when you switch it on, it may display a blinking zero and give an audible warning signal. This is due to the fact that the washing machine has performed a washing cycle during the manufacturers inspection tests, and this cycle has not been erased after its completion. Delay start, a time value indicated in hours and selected by means of the relevant button.

10 START/PAUSE button

This button has three functions: Start: after you have selected the desired programme and options, press this button to start the machine. The light above the button will stop flashing and remain lit. If you have selected a delay time by means of button 12, the countdown will begin and will be shown on the display. Pause: when you press this button again, the programme in progress is interrupted. The light above the button will start flashing. To restart the programme, press the button again.
When you PAUSE the cycle, the DOOR LOCKED light goes out, and it becomes possible to open the door, provided the machine is not in the heating or drying phase; the level of the water is not high; the drum is not turning. Important! You must set the washing machine to PAUSE before you make any change in the programme in progress. Draining of water and spinning after the execution of programmes with the RINSE HOLD option.
To select rinse & spin, press the SKIP button once, the wash LED goes out.
To select spin only, press the SKIP button twice. The wash & rinse LED,s go out.

11 SKIP/RESET button

This button performs two functions: - Clears the memory - Selects special programmes At the end of every programme the RESET button must be pressed once or repeatedly to clear the programme memory. This will be confirmed by three dashes, flashing in the display. If the previous programme is not cleared, the display will show a 0 flashing and an audible signal will sound, when you switch the machine on. Selecting a special programme: A wash programme must be selected in the normal way. (START button not pressed)
To select Drain press the SKIP button three times, the wash - rinse - spin LED,s go out.

S TA R T / P A U S E

If you wish to cancel or advance the running programme to the required phase, PAUSE the cycle and then press the SKIP button as previously described.
A normal wash cycle consists of the following phases, Wash - Rinses - Spin and is confirmed by the illumination of the corresponding LED,s.
PREWASH WASH RINSES SPIN DRAIN DRYING

12 DELAY button

This button makes it possible to delay the starting of the programme by up to 24 hours. The delay you have selected is shown on the display for about 3 seconds; afterwards, the duration of the programme reappears. You must select this option after you have set the programme and before you press the START/PAUSE button. The time value shown on the display will decrease by one unit every hour. You can change the delay time at any moment, before you press the START/PAUSE button. If you have already pressed the START/PAUSE button, and you wish to change or cancel the delay time, proceed as follows: set the machine to PAUSE by pressing the START/PAUSE button; press the DELAY button until the display shows the desired delay time or press the DELAY button once, to erase the delay time. The display will indicate 0 h. press the START/PAUSE button again. Important! The door will be locked throughout the delay time (DOOR LOCKED light lit). If you need to open the door, you must first set the machine to PAUSE by pressing the START/PAUSE button. After you have closed the door, press the START/PAUSE button again.

13 Programme phase indicator lights
When you select a programme, the lights relevant to the phases that form the programme light up.
After you have started the programme, only the light relevant to the phase that is currently being carried out will remain lit.

Operating Sequence

WASHING Before the first wash, we recommend that you run a cotton cycle at 60C, without any laundry in the machine, to remove any manufacturing residue from the drum and tub. Pour 1/2 a measure of detergent into the dispenser drawer and start the machine.

4. Switch the machine on

Press the ON/OFF button to switch the machine on. The display will show three blinking dashes or a blinking zero. The light above the button will light up.

O N / OFF

1.Load the laundry
Open the door. Place the laundry in the drum, one item at a time, shaking them out as much as possible. Close the door.
5. Select the desired programme/ fabric
Press the FABRICS button repeatedly, in order to select the desired programme/fabric. The relevant light will light up. The lights relevant to the phases that form the programme will light up. The display will show the duration of the selected programme, calculated on the basis of the maximum load for each type of fabric. The START/PAUSE button light will start flashing. If the load of laundry to be washed is small, at the beginning of the cycle the display will still indicate the duration relevant to the maximum load. The duration value will be gradually adjusted during the execution of the cycle.
2.Measure out the detergent
Pull out the dispenser drawer until it stops. Measure out the amount of detergent required and pour it into the main wash compartment. If you wish to carry out the prewash, pour detergent into the appropriate compartment marked.
3.Measure out the fabric softener
If required, pour fabric softener into the compartment marked , without exceeding the MAX mark.

Close the drawer gently.

6. Select the temperature
Press the TEMPERATURE button if you wish to select a temperature value different from the one proposed by the washing machine. The relevant light will light up.

If your laundry is only slightly soiled, select the QUICK WASH option. The relevant light illuminates.

9. Select the DELAY TIME

Before you start the programme, if you wish the starting to be delayed, press the DELAY button repeatedly, or keep it pressed, to select the desired delay. The selected delay time value (up to 24 hours) will appear on the display for 3 seconds, then the duration of the programme will appear again.

P ER ATU

7. Select the spin speed or the RINSE HOLD option
Press the SPIN SPEED button repeatedly, in order to select the desired spin speed or the RINSE HOLD option. The relevant light will light up. If you select the RINSE HOLD option, the machine will stop at the end of the programme with the water still in the tub.

900 700

8. Select the desired options
If your laundry is very dirty, it may be advisable to select the PREWASH option. If you wish the laundry to undergo an extra rinse, select the SUPER RINSE option. Press the OPTIONS button so as to cause one or both of the lights to light up.
PREWASH EXTRA RINSE QUICK WASH

10. Start the programme

Press the START/PAUSE button. The relevant light will stop flashing, the DOOR LOCKED light will light up, and only the light relevant to the phase that is in progress will remain lit. If you have chosen a delayed start, the washing machine will begin the countdown. The display will show the duration of the programme or the selected delay.

N SPEE

11. How to change a programme during its cycle
Before you make any change, you must pause the machine by pressing the START/PAUSE button. It is possible to change any phase before the programme carries it out. Changing the type of fabric or temperature is possible, obviously, only during the washing phase. When you make a change in these two parameters, the machine will resume the cycle from the beginning. If it is necessary to drain the water in order to change the programme in progress, proceed as follows: PAUSE the machine by pressing the START/PAUSE button; press the SKIP/RESET button repeatedly, until only the DRAIN light remains lit; press the START/PAUSE button again. When the water has been drained, the display shows a blinking zero. You may now select a new programme and press the START/PAUSE button to start it.

After approximately 3 minutes, you can open the door. Pay attention to the level and temperature of the water in the machine! When you close the door and press the ON/OFF button again, the machine will resume the programme from the point where it had been interrupted.

14. End of programme

At the end of the programme, the machine stops automatically, gives an audible signal, and displays a blinking zero. If you had selected the RINSE HOLD option, the START/PAUSE button light flashes to indicate that the water must be drained. The display shows a steadily lit zero. When the programme has been completed, a blinking zero appears on the display and the audible signal is given. The DOOR LOCKED light goes out at once. Press the SKIP/RESET button repeatedly to erase the programme that has just been carried out. If you omit to do this, the next time you switch the machine on, the blinking zero will appear on the display and you will hear the audible signal. Note: when you switch the machine on, if you must erase the previously performed programme, it is also sufficient to press the FABRIC button and select a new programme. Press the ON/OFF button to switch the machine off. The relevant light will go out. Remove the laundry from the machine. Check whether the drum is completely empty, by rotating it with your hand. The purpose of this is to prevent any items of laundry from remaining accidentally in the drum, where they might get damaged in a subsequent wash (e.g. by shrinking) or bleed colour into another load of laundry. We advise you to close the water supply tap and disconnect the plug from the socket. Leave the door ajar in order to air the machine.
12. How to cancel a programme during its cycle
To cancel a programme that is being carried out, first pause the machine by pressing the START/PAUSE button, then press the SKIP/RESET button repeatedly, until the display shows three blinking dashes.
13. How to open the door during the cycle of a programme
You can open the door, after having set the machine to PAUSE, provided the following conditions exist: the washing machine is not in the heating phase beyond 40C; the level of the water is not high; the drum is not turning. If these requirements are met, when you pause the machine, the DOOR LOCKED light goes out and the door can be opened. Should it not be possible to open the door, and should it be absolutely necessary to do so, switch the machine off by pressing the ON/OFF button.

COTTONS SYNTHETICS

4. Press the START/PAUSE button to start the programme.
Do NOT overload the machine. Weigh the laundry the first few times you use the appliance. The average weights of the most common items are listed below as a guide: 1000g = 1 kg Sheet Pillow case Tablecloth Serviette Tea towel Linen hand towel Towelling hand towel Towelling bath towel Bath robe Mans shirt Apron 700-1000 g 100-200 g 400-500 g 50-100 g 70-120 g 100-150 g 150-250 g 700-1000 g 1000-1500 g 200-300 g 150-200 g

G G G G G G

Load the laundry loosely alternating large items with small ones. Sort the laundry according to the type of fabric, colour-fastness and how dirty it is. Avoid washing unhemmed or torn items as they may unravel. Before washing, empty all pockets of small objects which may have been left inside (coins, keys, screws etc). as these could damage the drain pump. When washing curtains, remove the hooks. Close poppers and zips and fasten loose buttons. It is essential to wash new coloured items separately when washing for the first time. When washing fabrics requiring different wash temperatures together, always select the lowest temperature. White items should not be washed with coloured items. Very small items (handkerchiefs, ribbons, socks etc) should be washed in a washing bag or a pillow case. Use a good quality detergent suitable for automatic washing machines. Use the correct quantities of detergent. For wool, use gentle detergent only in small quantities. Bleach is very corrosive; it should be used with care and kept out of reach of children.
Some stains such as fruit, wine, grass, rust etc. are difficult to remove and should be treated before washing with specific products, which can be found in most household shops. In some cases it may help to soak the stain before washing with a special presoak product or biological detergent. If you have used the machine to wash, rinse or spin only non-colour fast garments, there may be dye left in the sump. To ensure any subsequent wash is not contaminated with the dye, select and carry out a rinse and spin programme, without any garments, to ensure that any dye is removed from the sump. Do not leave the damp laundry load in a heap too long before drying. Avoid drying dark clothes with light coloured fluffy items such as towels as these can attract the fluff. If you overdry the laundry, besides wasting energy, any subsequent ironing may become more difficult because the fabric could be heavily crumpled. Remove the laundry when the appliance has finished drying. To avoid a static charge when drying is completed, use either a fabric softener when you are washing the laundry or a fabric conditioner specifically for tumble dryers. Particularly delicate items such as synthetic curtains, woollen and silk, garments with metal inserts, nylon stockings, bulky garments such as anoraks, bedcovers, quilts, sleeping bags and duvets must not be machine dried. Garments padded with foam-rubber or materials similar to foam-rubber must not be machine dried; they represent a fire hazard. Also, fabrics containing residues of setting lotions or hair sprays, nail solvents or similar solutions must not be machine dried in order to avoid the formation of harmful vapours. For drying, follow the indications given on the manufacturers labels. May be tumble dried Drying at high temperature Drying at reduced temperature Do not tumble dry Important: As a dryer, the machine works on the condensation principle. Therefore, the water taps must be open and the drain hose must drain water into a sink or into the drain pipe, even during the drying cycle.

The dangers of freezing

If the machine is exposed to temperatures below 0C, certain precautions should be taken. G Turn off the water tap. G Unscrew the inlet hose. G Unhook the drain hose from the rear support and position the end of this hose and that of the inlet hoses in a bowl. Run the draining programme. To do this: G Switch the machine on G Select a washing programme G Press the SKIP/RESET button three times G Press START/PAUSE button G Disconnect the appliance. G Screw the inlet hose and reposition the drain hose. G When you intend to start the machine up again, make sure that the room temperature is above 0C.
Clean carefully under a fast running tap.

Warning

When the appliance is in use and depending on the programme selected there can be hot water in the filter. Never remove the filter during a wash cycle, always wait until the appliance has finished the cycle, and is empty. When replacing the filter, ensure it is securely retightened so as to stop leaks and young children being able to remove it.

The water inlet filter

If your water is very hard or contains traces of lime deposit, the water inlet filter may become clogged. It is therefore a good idea to clean it from time to time. Turn off the water tap. Unscrew the water inlet hose. Clean the filter using a hard bristle brush. Tighten up the inlet hose.

Something Not Working

Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. Before contacting your local Service Force Centre, please carry out the checks listed below. IMPORTANT: if you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is under guarantee. During machine operation it is possible that one of the following alarm codes appears on the display: - E10 : problem with the water supply If at the end of the programme the alarm code EFO is displayed this - E20 : problem with water draining means that the drain filter is clogged. - E40 : door open Once the problem has been eliminated, press the START/PAUSE button to restart the programme. If after all checks, the problem persists, contact your local Service Force Centre.

Symptom

The machine does not start

Possible causes

The door has not been closed. (E40) The plug is not properly inserted in the power socket. There is no supply at the socket. The main fuse or the fuse in the plug has blown. The START/PAUSE button has not been depressed. The DELAY START option has been selected. The water tap is closed. (E10) The filter in the inlet hose is blocked. (E10) The inlet hose may be squashed or kinked. (E10) The door has not been closed. (E40) The end of the drain hose is too low. The end of the drain hose is submerged in water. There is no vent in the end of the drain hose. The drain hose may be squashed or kinked. (E20) The RINSE HOLD option has been selected. The drain filter may be blocked. (E20) The drain hose extension, if fitted, is not correct. Follow the instructions for connecting to the waste. The drainage system pipes are blocked. The wash load is unbalanced: redistribute the clothes inside the drum to allow the machine to spin. Too much detergent or unsuitable detergent has been used (creates too much foam). Check whether there are any leaks from the inlet hose fittings. It is not always easy to see this as the water runs down the hose; check to see if it is damp. The drain hose may be damaged or not securely positioned. The detergent dispenser drawer or recess is clogged. The drainage system pipes are blocked. Too little detergent or unsuitable detergent has been used. An insufficient amount of detergent leaves the laundry looking grey and causes lime scale to form. Stubborn stains have not been treated prior to washing The correct wash programme/temperature has not been selected. Too much laundry has been placed in the drum. 22

The machine does not fill

G G G G

The machine fills then empties immediately The machine does not empty and/or does not spin

G G G G G G G G G

There is water on the floor
Unsatisfactory washing results
The machine vibrates when spinning

G G G G G

The internal packing has not been removed. The machine is in contact with the wall or furniture. The machine is not level and stable (check diagonally). The washing load is badly distributed in the drum. Maybe there is very little laundry in the drum.

The door will not open

The water level is above the bottom edge of the door. The machine is heating the water or drying the clothes. G The drum is turning. The door can only be opened when the relevant light has gone out.
Spinning starts late or the machine does not spin
The machine makes an unusual noise
The electronic unbalance detection device has cut in because the laundry is not evenly distributed in the drum. The laundry is redistributed by reverse rotation of the drum. This may happen several times before the unbalance disappears and normal spinning can resume. If, after few minutes, the laundry is still not evenly distributed in the drum, the machine will spin at a lower spin or will not spin. In this case, redistribute the load manually and select the spin programme. The machine is fitted with a type of motor which makes an unusual noise compared with other traditional motors. This new motor ensures a softer start and more even distribution of the laundry in the drum when spinning, as well as increased stability of the machine. Machines based on modern technology operate very economically using very little water without affecting performance. The drying time or degree of drying has not been selected The water tap is not turned on (E10) The drain filter is clogged (E20) The machine is overloaded The selected drying time was not suitable for the laundry

Mod.. Prod. No. Ser. No.

No water is visible in the drum The machine does not dry or does not dry properly
Service & Spare Parts
In the event of your appliance requiring service, or if you wish to purchase spare parts, please contact your local Zanussi Service Force Centre by telephoning:

929929

Your telephone call will be automatically routed to the Service Force Centre covering your post code area. The addresses are listed on the following pages. Before calling out an engineer, please ensure you have read the details under the heading Something Not Working. When you contact the Service Force Centre you will need to give the following details: 1. Your name, address and post code 2. Your telephone number 3. Clear and concise details of fault 4. The model and serial number of the appliance (found on the rating plate - see picture). 5. The purchase date

To contact your local Service Force Centre telephone 08705

929 929

NORTH EAST

CHANNEL ISLANDS

GUERNSEY

ISLE OF LEWIS

Guernsey Electricity PO Box 4 Vale, Guernsey Channel Islands GY1 3AD Jersey Electricity Company Haut De Lorme Rue De Haut De Lorme Trinity Jersey Channel Islands JE3 5FG
ND Macleod 16 James Street Stornoway Isle of Lewis PA87 2QW 2, 6 & 8 Woodmarket Kelso Borders TD5 7AX 7 King Street Kirkwall Orkney KW15 1JF Scottish Hydro Electric Central Warehouse Inveralmond Perth PH1 3AF 3-4 Carlton Place Lerwick Shetland ZE1 0PW Bolts Shetland 26 North Road Lerwick Shetland ZE1 0PE Leask Electrical Harisdale Symbister, Whalsay Shetland ZE2 9AA

GATESHEAD

Unit 356a Dukesway Court Dukesway Gateshead NE11 0BH 15 Hainton Avenue Grimsby N. E. Lincs DN32 9AS Unit 1 Boulevard Industrial Estate Hull HU3 4AY 64-66 Cross Gates Road Cross Gates Leeds LS15 7YS Unit 23 Northfield Way Aycliffe Industrial Park Newton Aycliffe DL5 6EJ Pennine House Roman Ridge Road Sheffield S9 1GB

JERSEY

GRIMSBY

ORKNEY

SCOTLAND

ABERDEEN

54 Claremont Street Aberdeen AB10 6RA 33a Burnside Auchtermuchty Fife KY14 7AJ Unit 5 Block 2 Auchenraith Ind. Estate Rosendale Way Blantyre G72 0NJ 93 Irish Street Dumfries DGPQ 7 Hill Street Dunoon Argyll PA23 7AL Unit 12 Dumbryden Ind. Estate 2 Dumbryden Road Edinburgh EH14 2AB Unit 4 Wellington Road Bishopriggs Glasgow G64 2SA Unit 3BI Smithton Ind. Estate Smithton Inverness IV2 7WL R Haggerty Bruach Blackwaterfoot Isle of Arran J Zerfah 244 Bruernish Isle of Barra Western Islands HS9 5QY Walker Engineering Glenmhor Upper Serpentine Road Rothesay Isle of Bute PA20 9EH

(OWN SALES) SHETLAND

AUCHTERMUCHTY

NEWTON AYCLIFFE

BLANTYRE

(OWN SALES) WHALSAY

SHEFFIELD

DUMFRIES

DUNOON

(OWN SALES)

NORTH WEST

BIRKENHEAD

NORTHERN IRELAND

BELFAST

EDINBURGH
Owenmore House Kilwee Business Park Dunmurry Belfast BT17 0HD
1 Kelvin Park Dock Road Birkenhead CH41 1LT Unit 7 James Street Workshops James Street Carlisle Cumbria CA2 5AH South Quay Ind. Estate Douglas Isle of Man IM1 5AT Unit B Central Industrial Estate St Marks Street Bolton BL3 6NR Unit 250 Dawson Place Bamber Bridge Preston Lancashire PR5 8AL Unit 20 Haigh Park Haigh Avenue Stockport SK4 1QR

CARLISLE

GLASGOW

CARDIFF

ISLE OF MAN

INVERNESS

Unit 4 Guardian Industrial Estate Clydesmuir Road Cardiff CF2 2QS Unit 6-7 Coed Parc Abergele Road Rhuddlan Clwyd LL18 5UG Unit 9 St. Clears Business Park Tenby Road St. Clears Carmarthen SA33 4JW Plas Ffynnon Warehouse Middleton Road Oswestry SY11 2PP

BOLTON

ISLE OF ARRAN

PRESTON

ISLE OF BARRA

STOCKPORT

ISLES OF BUTE

OSWESTRY

SOUTH EAST

MIDLANDS

BIRMINGHAM

LONDON & EAST ANGLIA

BECKENHAM
66 Birch Road East Wyrley Trading Estate Witton Birmingham B6 7DB Pinfold Road Bourne PE10 9HT 68 St. Marys Street Bridgnorth Shropshire WV16 4DR 101 Rycroft Street Gloucester GL1 4NB Units 3 & 4 Bank Buildings Cattle market Hareford HE4 9HX Higham Ferrers Northants NN10 8PL Unit 2 Furnace Road Ilkeston DE7 5EP Unit 7 Oaks Industrial Estate Coventry Road Narborough Leicestershire LE9 5GF Unit 8 Clifton Street Stone Field Park Lincoln LN5 8LQ 18-21 Croft Road Brampton Ind. Estate Newcastle under Lyme Staffordshire ST5 0TW 13 Thornhill Road North Moons Moat Redditch Worcestershire B98 9ND Unit 3 Sterling Park Claymore Tamworth B77 5DQ Units 1 & 2 Northbrooks Close Gregorys Mill Ind. Estate Worcester WR3 8BP
11a Gardner Ind. Estate Kent House Lane Beckenham Kent BR3 1QZ Hanbury Road Widford Ind. Estate Chelmsford Essex CM12 3AE Unit 14 Capitol Park Capitol Way Colindale London NW9 0EQ 194 Court Road Mottingham Eltham London SE9 4EW 284 Alma Road Enfield London EN3 7BB Unit B4 Imperial Business Estate West Mill Gravesend Kent DA11 0DL Unit 6C Elton Park Business Centre Hadleigh Road Ipswich IP2 0DD 16-17 Woodside Ind. Park Works Road Letchworth Herts SG6 1LA 2 - 4 Royal Lane Yiewsley West Drayton Middlesex UB7 8DL Reform Road Maidenhead Berkshire SL6 8BY 10 Island Farm Avenue West Molesey Surrey KT8 2UZ 9 Pipers Court Berkshire Drive Thatcham Berkshire RG19 4ER 2b Trafalgar Street Norwich NR1 3HN Unit 1a The Summit Hanworth Road Sunbury on Thames TW16 5DB

ASHFORD

BOURNE BRIDGNORTH

CHELMSFORD

Unit 2 Bridge Road Business Centre Bridge Road Ashford Kent TN23 1BB Unit 1 Redfields Ind. Estate Church Crookham Fleet Hampshire GU13 0RD 21-25 Bridge Road Haywards Heath Sussex RH16 1UA Unit 30 Deacon Trading Estate Morley Road Tonbridge TN9 1RA

COLINDALE

GLOUCESTER HEREFORD

HAYWARDS HEATH

ELTHAM

TONBRIDGE

ENFIELD
HIGHAM FERRERS 30 High Street

GRAVESEND

SOUTH WEST

BARNSTAPLE

ILKESTON LEICESTER

IPSWICH

Main Road Fremington Barnstaple North Devon EX31 2NT Bournemouth Dorset BH1 4PW
BOURNEMOUTH 63-65 Curzon Road

LINCOLN

LETCHWORTH

BRIDGEWATER

6 Herswell Business Park Salmon Parade Bridgwater Somerset TA6 5PY 11 Eldon Way Eldonwall Trading Estate Bristol BS4 3QQ 266 Main Road Southbourne Emsworth PO10 8JL Unit 8 Enterprise Court Ryde Business Park Ryde Isle of Wight PO33 1DB Zealley Ind. Estate Kingsteignton Newton Abbot TQ12 3TD Unit 7D Pool Ind. Estate Druids Road Redruth Cornwall TR15 3RH

NEWCASTLE UNDER LYME

LONDON

BRISTOL

MAIDENHEAD

EMSWORTH

REDDITCH

MOLESEY

ISLE OF WIGHT

TAMWORTH

NEWBURY

NEWTON ABBOT Unit 2

WORCESTER

NORWICH

REDRUTH

SUNBURY

Installation Instructions
It is dangerous to alter the specifications or attempt to modify this product in any way. Care must be taken to ensure that the appliance does not stand on the electrical supply cable. Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person. Should the appliance power supply cable need to be replaced, this should be carried out by our Service Force Centre.

Technical Specifications

DIMENSIONS Height Width Depth 85 cm 60 cm 58 cm 230-240 V/50 Hz 2050 W (10A) Minimum Maximum Washing Cotton, linen Synthetics Delicate fabrics Wool and Hand Wash Drying Cotton, linen Synthetics Maximum 50 kPa 800 kPa 5 kg (max 6 kg) 2.5 kg 2.5 kg 2 kg 2.5 kg 2 kg 1200 rpm (WJS 1265 W) 1400 rpm (WJS 1465 W) 1600 rpm (WJS 1665 W)
WJS 1265 W WJS 1465 W WJS 1665 W 0.95 kWh 0.95 kWh 0.95 kWh 44 litres 44 litres 44 litres
POWER SUPPLY VOLTAGE TOTAL POWER ABSORBED WATER PRESSURE LOAD CAPACITY

SPIN SPEED

CONSUMPTION DATA FOR WASHING 5 KG NORMALLY SOILED COTTON ITEMS AT 60C

Energy Water

This appliance complies with the following E.E.C. Directives: - 73/23 EEC of 19.2.73 (Low Voltage Directive) and subsequent modifications; - 89/336 EEC of 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.

Unpacking

All transit bolts and packing must be removed before using the appliance. You are advised to keep all the packaging for re-use in case the machine is to be transported again. Using a spanner unscrew and remove the rear right bolt. Lay the machine gently on its back, making sure that the hoses are not squashed.

Positioning

Install the machine on a flat hard floor. Make sure that air circulation around the machine is not impeded by carpets, rugs etc. Check that the machine does not touch the wall or other kitchen units. Never place cardboard, wood or similar materials under the machine to compensate for any unevenness in the floor. Your new washing machine has been designed to be permanently plumbed in to your homes water supply and drainage system. However, if this is not possible, it may be connected to a suitable existing tap with the drain hose discharging into a sink. The appliance has an inlet hose, with female 3/4 BSP thread connector. If this connection is not compatible with the plumbing of the existing installation, a variety of connectors are available from good hardware stores and plumbers merchants to suit most domestic plumbing. Any alteration to your existing plumbing must be carried out by a competent person, or qualified plumber.