Reviews & Opinions
Independent and trusted. Read before buy Zanussi ZDF501S!

Zanussi ZDF501S Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Zanussi ZDF501S, size: 1.5 MB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.


About Zanussi ZDF501S
Here you can find all about Zanussi ZDF501S like manual and other informations. For example: review.

Zanussi ZDF501S manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Zanussi ZDF501S please write about it to help other people.
[ Report abuse or wrong photo | Share your Zanussi ZDF501S photo ]

User reviews and opinions

Comments to date: 1. Page 1 of 1. Average Rating:
petergloor 10:12pm on Saturday, April 10th, 2010 
I bought the Zanussi-Electrolux ZDF 501 S about 2 months ago. I am thrilled with it.

Comments posted on are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.




156999 58/0en


Pagina 1

User manual


ZDF 501

Pagina 2

Safety information - - - - - - - - - - - - - - - - - -3 Control panel and functions - - - - - - - - - - -4 Programme table - - - - - - - - - - - - - - - - - - -7 Before the first use - - - - - - - - - - - - - - - - -8 Setting the water softener - - - - - - - - - - - - -8 Filling with dishwasher salt - - - - - - - - - - -11 Filling with rinse aid - - - - - - - - - - - - - - - -12 Adjusting the dosage of rinse aid - - - - - - -12 Loading cutlery and dishes - - - - - - - - - - -13 Filling with detergent - - - - - - - - - - - - - - -16 Unloading the dishwasher - - - - - - - - - - - -16 Cleaning and care - - - - - - - - - - - - - - - - - 17 Environmental concerns - - - - - - - - - - - - - 18 Something not working- - - - - - - - - - - - - - 19 Technical data- - - - - - - - - - - - - - - - - - - - 21 Consumption values - - - - - - - - - - - - - - - 21 Hints for test institutes - - - - - - - - - - - - - - 22 Installation - - - - - - - - - - - - - - - - - - - - - - 23 Service and spare parts - - - - - - - - - - - - - 26 Guarantee conditions - - - - - - - - - - - - - - - 27

Pagina 3

Safety information
In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features. Save these instructions and make sure that they remain with the appliance if it is moved or sold, so that everyone using it through its life will be properly informed on appliance use and safety.

Correct use

This dishwasher is only intended for washing household utensils suitable for machine washing. Do not put any solvents in the dishwasher. This could cause an explosion. Knives and other items with sharp points must be loaded in the cutlery basket with their points down or placed in a horizontal position in the upper basket. Only use products (detergent, salt and rinse aid) suitable for dishwashers. Avoid opening the door whilst the appliance is in operation, hot steam may escape. Do not take any dishes out of the dishwasher before the end of the dishwashing cycle. After use, isolate the appliance from the power supply and turn off the water supply. This product should be serviced only by an authorised service engineer, and only genuine spare parts should be used.
Ensure that the door of the dishwasher is always closed when it is not being loaded or unloaded. In this way you will avoid anybody tripping over the open door and hurting themselves. Do not sit or stand on the open door.

Child safety

This appliance is designed to be operated by adults. Dont allow children to use the dishwasher unsupervised. Keep all packaging well away from children. There is risk of suffocation. Keep all detergents in a safe place out of childrens reach. Keep children well away from the dishwasher when the door is open.


General safety
Check your dishwasher for any transport damage. Never connect a damaged machine. If your dishwasher is damaged contact your supplier. All packaging must be removed before use. Any electrical and plumbing work required to install this appliance must be carried out by a qualified and competent person. For safety reasons it is dangerous to alter the specifications or attempt to modify this product in any way.
Dishwasher detergents can cause chemical burns to eyes, mouth and throat. Could endanger life! Comply with the safety instructions of the dishwasher detergent manufacturer. The water in your dishwasher is not for drinking. Detergent residues may still be present in your machine.

Pagina 4

Never use the dishwasher if the electrical supply cable and water hoses are damaged; or if the control panel, work top or plinth area are damaged such that the inside of the appliance is freely accessible. Contact your local Service Force centre, in order to avoid hazard. All sides of the dishwasher must never be drilled to prevent damage to hydraulic and electric components.
WARNING! For electrical and water connection carefully follow the instructions given in specific paragraphs.
Control panel and functions
Programme in progress light Digital display On/Off button
Function and programme selection buttons Delay start button Salt and rinse aid lights IMPORTANT! Always remember that when performing operations such as: - selecting a washing programme, - setting the water softener, the appliance MUST be in setting mode:

Press On/Off button, ONLY a programme button light is illuminated = last performed programme still set. In this case the programme has to be cancelled (see instructions Cancel a washing programme in progress).
Press On/Off button, ALL programme selection button lights are illuminated = appliance in setting mode.

Pagina 5

In addition to the dishwashing programme selection, the following functions can also be set with the help of these buttons.

Function buttons

- the setting of the water softener, - the cancelling of a programme in progress.

Programme selection

Starting the washing programme: 1. Press the On/Off button. 2. Press the button corresponding to the required programme, the corresponding light remains illuminated while the other programme lights turn off. In the digital display will appear, flashing, the running time of the programme (in minutes). 3. The programme in progress light illuminates. 4. After about 3 seconds from the last pressure of a button the programme starts automatically. In the digital display the running time of the programme is no longer flashing and the programme in progress light remains illuminated.
IMPORTANT! Once the programme has started, if you want to change the selection made you must cancel the washing programme in progress.
Cancel the washing programme in progress: 1. Press and hold simultaneously function buttons 2 and 3 until ALL programme button lights will illuminate. 2. Release function buttons 2 and 3. 3. Switch off the machine by pressing the On/Off button or select a new washing programme (check that there is detergent in the detergent dispenser.
IMPORTANT! It is possible to select a washing programme and the delay start also with the door slightly opened. In this case the start of the programme or the countdown will occur after the closure of the door. Until that moment it is possible to modify the set made.

Pagina 6

Delay start


This option allows the start of the programme to be delayed from 1 to 19 hours. Before selecting the washing programme, press the On/Off button and then press the delay start button until the flashing number of the hours for the delay start will appear in the digital display. Select a washing programme, in the digital display will appear for a moment, the running time of the programme and then again appears the selected delay start time. As soon as the number of hours is displayed without flashing, the countdown for the delay start is active. Once the countdown has elapsed the washing programme will start automatically.
Cancel the delay start in progress: To cancel a delay start in progress you have to reset the dishwasher; follow the same instructions given in Cancel the washing programme in progress.


Cancelling a delay start involves also the cancelling of the washing programme set. In this case you have to select the washing programme again.
Programme in progress light
Illuminates when the washing programme has been set. When the delay start has been set, this light turns off and will come on again once the countdown has elapsed and the washing programme has started.
Salt refilling light Rinse aid refilling light
Illuminates when special salt needs to be filled. It can remain illuminated several hours after the salt has been filled.
Illuminates when rinse aid needs to be filled.

Pagina 7

Programme table
Programme Intensive 70 Auto min. Eco 50 Rinse and Hold Use Heavy soil. Crockery, cutlery, pots and pans Normal / Light soil. Crockery and cutlery Light soil. Crockery and cutlery Normal soil. Crockery and cutlery Any. Partial load (to be completed later in the day). This programme does not require the use of detergent. Cycle description Prewash - Main wash 2 intermediate rinses - Final rinse Dry Prewash - Main wash 1 or 2 intermediate rinses Final rinse - Dry Main wash - Final rinse Prewash - Main wash 1 intermediate rinse - Final rinse Dry Prewash
"AUTO" washing programme During the "AUTO" washing programme the amount of soil on the dishes is determined by how cloudy the water is. If the appliance is partially loaded and the dishes lightly soiled, the "prewash", "main wash", and "rinse" phases of the programme are shorter and the water consumption level is lower. If the appliance is fully loaded and the dishes heavily soiled, the "prewash", "main wash", and "rinse" phases of the programme are longer and the water consumption level is higher. For this reason the programme duration, water and energy consumption levels can vary within the stated range for AUTO programme (see "Washing programmes chart"). During the "AUTO" programme the temperature of the main wash water is also automatically adjusted between 50C and 65C depending on the amount of soil on the dishes. 7

Pagina 8

Before the first use
When using separate special (dishwasher) salt, rinse aid and detergent:
- set the water softener - add special (dishwasher) salt - fill up with rinse aid
When using tablets that integrate rinse aid, detergent, salt function and other additives:
there is no need to fill up with special salt or rinse aid. Check whether these detergents are suitable for your water hardness. Follow the manufacturers instructions. - Set the water hardness to level 1. IMPORTANT! If the drying results are not satisfactory we recommend that you: 1. Fill up the rinse aid dispenser with rinse aid. 2. Set the rinse aid dosage to position 2. If you decide in future to use separated detergents, we advise that you: - Fill up the salt and rinse aid container. - Adjust the water hardness setting to the highest level and perform 1 normal washing programme without loading any dishes. - Adjust the water hardness setting according to the hardness of the water in your area. - Adjust the rinse aid dosage
When using tablets that integrate rinse aid and detergent:
there is no need to fill up with rinse aid - set the water softener - add special (dishwasher) salt
Setting the water softener
The dishwasher is equipped with a water softener designed to remove minerals and salts from the water supply, which would have a detrimental or adverse effect on the operation of the appliance. The softener should be adjusted according to the hardness of the water in your area. Your local Water Authority can advise you on the hardness of the water in your area. 8 IMPORTANT! The water softener must be set in both ways: manually and electronically.

Pagina 9

Water hardness Clarke1) 64 - - - - - - - - - 12 <5 in TH2) 91 - - - - - - - - - 18 <7 in mmol/l3) 9,0 - 12,5 7,6 - 8,9 6,5 - 7,5 5,1 - 6,4 4,0 - 5,0 3,3 - 3,9 2,6 - 3,2 1,9 - 2,5 0,7 - 1,8 < 0,7
Level indicated on the digital display
Adjustment of the water hardness setting manually electronically level 10 level 9 level 8 level 7 level 6 level 5 level 4 level 3 level 2 level 1 no salt necessary

factory setting

1) Clarke degree, measure of the water hardness. 2) (TH) French degree, measure of the water hardness. 3) (mmol/l) millimol per litre, international unit for water hardness
Setting the water softener manually (see table)
The water softener is factory set at position 2.
Set switch to position 1 or 2

Pagina 10

Setting the water softener electronically (see table)
The water softener is factory set at position 5.
The dishwasher must be switched off. Switch on the dishwasher by pressing the On/Off button.
Press and hold simultaneously function buttons 2 and 3 until the lights of function buttons 1, 2 and 3 start flashing.
Release the buttons and then press function button 1; the lights of function buttons 2 and 3 turn off while function button 1 goes on flashing.
The digital display indicates the current level.
To change the level, press function button 1. Each time the button is pressed the level increases. (For the selection of the new level see the chart).
The digital display indicates the new level set. (Level 1 follows level 10).
To memorise the operation, switch off the dishwasher by pressing the On/Off button.

Pagina 11

Filling with dishwasher salt
CAUTION! Use only special salt suitable for dishwashers

Unscrew the cap.

Only before filling with salt for the first time, fill the salt container with water
Using the funnel provided, pour in the salt until the container is filled with salt.
IMPORTANT! Water will overflow from the container as salt is added.
IMPORTANT! Immediately start a complete programme.
Remove any trace of salt.
Replace the cap tightly turning it clockwise until it stops with a click.
IMPORTANT! Top up the special salt when the light on the control panel illuminates. 11

Pagina 12

Filling with rinse aid

Open the lid.

Fill up with rinse aid. The maximum level for filling is indicated by "max".
Clean up any rinse aid which overflows. Close the lid and press until it locks.
IMPORTANT! Top up the rinse aid when the light on the control panel illuminates. CAUTION! Never fill the rinse aid dispenser with any other substances (e.g. dishwasher cleaning agent, liquid detergent). This would damage the appliance.
Adjusting the dosage of rinse aid
Increase the dose if there are drops of water or lime spots on the dishes after washing. Reduce the dose if there are whitish streaks on the dishes or a bluish film on glassware or knife blades.

Set the dosage level. (The dose is factory set in position 4).
Close the lid and press until it locks.

Pagina 13

Loading cutlery and dishes
The following items are not suitable for use in the dishwasher: - Cutlery with wooden, horn, china or mother-of-pearl handles - Plastic items that are not heat resistant - Older cutlery with glued parts that are not temperature resistant - Bonded cutlery items or dishes - Pewter or copper items - Lead crystal glass - Steel items prone to rusting - Wooden platters - Items made from synthetic fibres
When loading the dishwasher, make sure that you: - Remove all left over food and debris. - Soften remnants of burnt food in pans - Load hollow items such as cups, glasses, pans, etc. with the opening downwards so that water cannot collect in the container or a deep base. - Dishes and items of cutlery must not lie inside one another, or cover each other. - To avoid damage to glasses, they must not touch. - Lay small objects in the cutlery basket.
Plastic items and pans with teflon have a tendency to retain water drops; these items will not dry as well as porcelain and steel items.
IMPORTANT! Before closing the door, ensure that the spray arms can rotate freely.
Load cutlery. For best results we recommend you to use the cutlery grid provided (if the size and dimensions of the cutlery allow it.
Place knives and other items of cutlery with sharp points or edges with their handles facing upwards. Risk of injury!

Pagina 14

Load the lower basket. Arrange serving dishes and large lids around the edge of the basket.
The two rows of prongs on the lower basket can be easily lowered to allow you to load pots, pans and bowls.
Load upper basket. Light items (plastic bowls etc.) must be loaded in the upper basket and arranged so they do not move.
For taller items, the cup racks can be folded upwards.
If plates are to be loaded in the upper basket: load them starting from the rear positions; tilting them slightly forwards and avoiding the front positions near the door.

Pagina 15

Adjusting the height of the upper basket
If washing very large plates you can load them in the lower basket after moving the upper basket to the higher position.
Maximum height of the dishes in: upper basket lower basket With upper basket raised With upper basket lowered 20 cm 24 cm 31 cm 27 cm
To move to the higher position proceed as follows:
1. Pull out the basket until it stops. 2. Carefully lift both sides upwards until the mechanism is engaged and the basket is stable.
To lower the basket to the original position proceed as follows:
1. Pull out the basket until it stops. 2. Carefully lift both sides upwards and then allow the mechanism to drop back down slowly, keeping hold of it.
IMPORTANT! Never lift or lower the basket on one side only IMPORTANT! When the basket is in the higher position you will not be able to use the cup racks.

Pagina 16

Filling with detergent
IMPORTANT! Only use detergents suitable for dishwashers. Observe the manufacturers dosing and storage recommendations.
Fill in the detergent in compartment A.
Observe the dosing levels.
For programmes with prewash add an additional detergent dose in compartment B.
When using detergent tablets: place detergent tablets in compartment A.

Close the lid.

Unloading the dishwasher
IMPORTANT! Open the dishwashers door, leave it ajar and wait a few minutes before removing the dishes; hot dishes are sensitive to knocks. In this way they will be cooler and the drying will be improved. Empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one. q Water may appear on the sides and the door of the dishwasher as the stainless steel will eventually become cooler than the dishes.

Pagina 17

Cleaning and care

Cleaning the filters

IMPORTANT! NEVER use the dishwasher without filters. Incorrect repositioning and fitting of the filters will produce poor washing results.
The dishwasher must be switched off
Clean filters A, B and C thoroughly under running water.
Turn the handle about 1 /4 turn anticlockwise and remove filters B and C.
Remove filter A from the base of the washing compartment.
Put the flat filter A back in the base of the washing compartment and ensure that it fits perfectly under the two guides D.
Replace the filters and lock by turning the handle clockwise to the stop.
IMPORTANT! NEVER try to remove the spray arms. If residues of soil have clogged the holes in the upper spray arm, remove them with a toothpick.

Pagina 18

External cleaning
Clean the external surfaces of the machine and control panel with a damp soft cloth. If necessary use only neutral detergents. Never use abrasive products, scouring pads or solvent (acetone, trichloroethylene etc.). Ensure that the seals around the door, the detergent and rinse aid dispensers are cleaned regularly with a damp cloth. We recommend every 3 months to run a 65C wash programme without dishes using detergent.

Frost precautions

Avoid placing the machine in a location where the temperature is below 0C. If this is unavoidable, empty the machine, close the appliance door, disconnect the water inlet pipe and empty it.

Moving the machine

If you have to move the machine (moving house etc.): 1. Unplug it. 2. Turn the water tap off. 3. Remove the water inlet and discharge hoses. 4. Pull the machine out together with the hoses. 5. Only transport the dishwasher in an upright position, otherwise salt water may run out.

Prolonged periods of non-operation
If you are not using the machine for any period of time you are advised to: 1. Unplug the appliance and then turn off the water. 2. Leave the door ajar to prevent the formation of any unpleasant smells. 3. Leave the inside of the machine clean.

Environmental concerns

Packaging material
The packaging materials are environmentally friendly and can be recycled. The plastic components are identified by markings, e.g. >PE<, >PS<, etc. Please dispose of the packaging materials in the appropriate container at the community waste disposal facilities. WARNING! When a unit is no longer being used: - Pull the plug out of the socket. - Cut off the cable and plug and dispose of them. - Dispose of the door catch. This prevents children from trapping themselves inside and endangering their lives. 18

Old appliance

The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

Pagina 19

Something not working
IMPORTANT! The dishwasher will not start or stops during operation. Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the indications described in the chart, without calling out an engineer. Open the door and carry out the following suggested corrective actions. IMPORTANT! When carrying out the suggested corrective actions the appliance must be switched off.
Fault code / malfunction The dishwasher does not fill with water. - continuous flashing of the light of the running programme appears in the digital display Possible cause The water tap is blocked or furred with limescale. The water tap is turned off. The filter (where present) in the. threaded hose fitting at the water inlet valve is blocked. The water inlet hose has not been correctly laid or it is bent or squashed. The sink spigot is blocked. The water drain hose has not been correctly laid or it is bent or squashed. Anti-flood device is activated. Solution Clean the water tap. Turn the water tap on. Clean the filter in the. threaded hose fitting. Check the water inlet hose connection. Clean out the sink spigot. Check the water drain hose connection.

The dishwasher will not drain. - continuous flashing of the light of the running programme appears in the digital display
- continuous flashing of the light of the running programme appears in the digital display
Close the water tap and contact your local Service Force Centre.
The dishwasher door has not been properly closed. The programme does not start. The main plug is not plugged in.
Close the door Insert the mains plug
The fuse has blown in the household Replace the fuse. fuse box. Delay start has been selected If dishes are to be washed immediately, cancel the delay start.

Pagina 20

The wash results are not satisfactory
The dishes are not clean The wrong washing programme has been selected. The dishes were arranged in such a way as to stop water reaching all parts of the surface. The baskets must not be overloaded. q The spray arm do not rotate freely due to incorrect arrangement of the load. q The filters in the base of the washing compartment are dirty or incorrectly positioned. q Too little or no detergent has been used. q Where there are limescale deposits on the dishes; the salt container is empty or the incorrect level of the water softener has been set. q The drain hose connection is not correct. q The salt container cap is not properly closed.

q q q q q

The dishes are wet and dull There are streaks, milky spots or a bluish coating on glasses and dishes Water drops have dried onto glasses and dishes
Rinse aid was not used. The rinse aid dispenser is empty. Decrease rinse aid dosing.
Increase rinse aid dosing. The detergent may be the cause, Contact the detergent manufacturers consumer care line.
If after all these checks, the problem persists, contact your local Service Force Centre, quoting the model (Mod.), product number (PNC) and serial number (S.N.). This information can be found on the rating plate located on the side of the dishwasher door (see picture). So that you always have these numbers at hand, we recommend you to make a note of them here: Mod. :. PNC :. S.N. :.

Pagina 21

Technical data
Dimensions Width Height Depth. 60 cm 85 cm 61 cm
Electrical connection Voltage - Overall power - Fuse Water supply pressure Capacity Max. weight Noise level
Information on the electrical connection is given on the rating plate on the inner edge of the dishwashers door. Minimum Maximum 0,05 MPa (0.5 bar) 0,8 MPa (8 bar) 12 place settings 41 kg 47 dB (A)

Consumption values

The consumption values are intended as a guide and depends on the pressure and the temperature of the water and also by the variations of the power supply and the amount of dishes.
Programme Intensive 70 Auto min. Eco 50 (Test programme for Test Institutes) Rinse and Hold Programme duration (minutes) Energy (kWh) 1,7 - 1,9 1,1 - 1,5 0,8 1,05 < 0,1 Water (litres) 23 - - 15 4

* * * * *

* The programme duration is visible in the digital display when the washing programme is


Pagina 22
Hints for test institutes
Testing in accordance with EN 60704 must be carried out with appliance fully loaded and using the test programme (see "Consumption values"). Test in accordance with EN 50242 must be carried out when the salt container and rinse aid dispenser have been filled with salt and rinse aid respectively and using the test programme (see "Consumption values").
Full load: 12 standard place settings Amount of detergent required: Rinse aid setting: 5 g + 25 g (Type B) position 4 (Type III)
Upper basket Lower basket

Cutlery basket

Cup racks: position A

Pagina 23

WARNING! Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or competent person.

Water connection

WARNING! The dishwasher must not be connected to open water appliances or instantaneous water heaters. This dishwasher may be fed with either hot (max. 60) or cold water. Nevertheless we advise you a cold water supply. WARNING! Only use, for connection to the water mains, new hose-set; old hose-set must not be reused.
CAUTION! If the machine is connected to new pipes or pipes which have not been used for a long time, you should run the water for a few minutes before connecting the inlet hose.

Inlet hose

Connect the inlet hose to a water tap with an external thread of 3/4. The inlet hose can be turned either to the left or the right to suit the installation by means of the locknut. The locknut must be correctly fitted to avoid water leaks.

Drain hose

- Connect drain hose to the sink. Secure it with the supplied hose clamp. - Required height: 30 to 100 cm above bottom of the dishwasher. - If you use a drain hose extension the total length should not be longer than 4 metres. Likewise the internal diameter of the couplings used for connections to the waste outlet must be no smaller than the diameter of the hose provided.

Pagina 24

CAUTION! Always be sure, that there is no water leakage from hoses and their connections after the installation.
Ensure that the hoses are not kinked, crushed or entangled.

Electrical connection

WARNING! Safety standards require the appliance to be earthed. The manufacturer accepts no liability for failure to observe the above safety precautions. Prior to using the appliance for the first time, ensure that the rated voltage and type of supply on the rating plate match that of the supply where the appliance is to be installed. The fuse rating is also to be found on the rating plate. Always plug the mains plug into a correctly installed shockproof socket. WARNING! Multi-way plugs, connectors and extension cables must not be used. This could constitute a fire hazard through overheating. If necessary, have the domestic wiring system socket replaced. In case that the electrical cable has to be replaced, contact your local Service Force centre. The plug must be accessible after the appliance has been installed. Never unplug the appliance by pulling on the cable. Always pull the plug. 24

Pagina 25

Fitting under a counter
By removing the dishwashers worktop, you can install it under a close fitting sink unit or a pre-existing top. Be sure that once the appliance has been installed, it is easily accessible for the service engineer in the event that a repair is required.
Unscrew the two screws at the rear.
Push the top backwards about 1 cm.
Lift top at the front and remove it.


Good levelling is essential for correct closure and sealing of the door. When the appliance is correctly levelled, the door will not catch on either side of the cabinet.
Check if the dishwasher is levelled. If not, loosen or tighten the adjustable feet until the appliance is perfectly levelled.

Pagina 26

Service and spare parts
In the event of your appliance requiring service, or if you wish to purchase spare parts please contact your local Service Force Centre by telephoning:

Customer Care Department

For general enquiries concerning your ZanussiElectrolux appliance or for further information on Zanussi-Electrolux products please contact our Customer Care Department by letter or telephone at the address below or visit our website at Customer Care Department Major Appliances Zanussi-Electrolux Addington Way Luton Bedfordshire LU4 9QQ Tel: (*)
* calls to this number may be recorded for training purposes

08705 929929

Your telephone call will be automatically routed to the Service Force Centre covering your post code area. For the address of your local Service Force Centre and further information about Service Force, please visit the website at Before calling out an engineer, please ensure you read the details under the heading "Something not working". When you contact the Service Force Centre you will need to give the following details: 1. 2. 3. 4. Your name, address and post code Your telephone number Clear and concise details of the fault The model and serial number of the appliance (found on the rating plate) 5. The purchase date Please note that a valid purchase receipt or guarantee documentation is required for inguarantee service calls. For Customer Service in The Republic of Ireland please contact us at the address below: Electrolux Group (Irl) Ltd Long Mile Road Dublin 12 Republic of Ireland Tel: + 353 (0)Email: 26

To buy accessories, consumables and spare parts at our online shop please visit:

Pagina 27

Guarantee conditions
Standard Guarantee Conditions Exclusions
We, Zanussi-Electrolux, undertake that if within 12 months of the date of purchase this ZANUSSI-ELECTROLUX appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF CHARGE for labour, materials or carriage on condition that:
This guarantee does not cover: q Damage or calls resulting from transportation, improper use or neglect, the replacement of any light bulbs or removable parts of glass or plastic.
The appliance has been correctly installed and used only on the electricity supply stated on the rating plate. The appliance has been used for normal domestic purposes only, and in accordance with the manufacturers instructions. The appliance has not been serviced, maintained repaired, taken apart or tampered with by any person not authorised by us. All service work under this guarantee must be undertaken by a Service Force Centre. Any appliance or defective part replaced shall become the Companys property. This guarantee is in addition to your statutory and other legal rights.
Costs incurred for calls to put right an appliance which is improperly installed or calls to appliances outside the United Kingdom. Appliances found to be in use within a commercial environment, plus those which are subject to rental agreements. Products of Zanussi-Electrolux manufacture which are not marketed by ZanussiElectrolux.
Home visits are made between 8.30am and 5.30pm Monday to Friday. Visits may be available outside these hours in which case a premium will be charged.

Pagina 28

European guarantee
This appliance is guaranteed by Electrolux, in each of the countries listed in the following page, for the period specified in the appliance guarantee or otherwise by law. If you move from one of these countries to another of these countries the appliance guarantee will move with you subject to the following qualifications:
The appliance guarantee starts from the date you first purchased the appliance which will be evidenced by production of a valid purchase document issued by seller of the appliance. The appliance guarantee is for the same period and to the same extent for labour and parts as exists in your country of residence for this particular model or range of appliances. The appliance guarantee is personal to the original purchaser of the appliance and cannot be transferred to another user. The appliance is installed and used in accordance with instructions issued by Electrolux and is only used within the home, i.e. is not used for commercial purposes. The appliance is installed in accordance with all relevant regulations in force within your new country of residence.



XE3-GF KGE2000TSC Review Finepix A205 Asus P4B 5 1 SDC-812II M-24E 5700 SGH-G400 PVR-8000 48GII Calculator 26LH2000 3 01 KS-FX650R CTO650 Venture 1998 AL1923 IS450 DR-GA500 Bluechart Vintage-S800 WMA 31 NEW Golf Super Yamaha W7 Color 800 KRC-358RA Vancouver CD35 WM-12336FD SCC-931TP Photoimpression 5 BHP452 5P MP SB-R200 Model Digigard DG85 I945gaplf Adventure BJC-4400 URC 801 Yamaha DMP7 DCP-375CW KV-85 Psr-630 D21710 D27300 P4S800-MX Perfection 4870 NW-S703F Ihdr-5200C Mouse YBR125-2005 TH-C46fd18A VLT4115 PJ550 P2201 W300I SDM-S93 Ketron XD3 Nikon F75 1220U S7600 FJR1300AS-2007 RR-QR160 Cookbook KDL-32J5000 DP-150FP 337 407 Smart MBS-100 XR4400 MVX4I IC-251AE Cube-30 DIR615 HR-J588 MD491SYS SL3242FX-PRO Kodak CD90 Xv-n422 Ryobi 132R Blackberry 6220 Carbon AW1000AA UT37-XV700 Estate TXL42G20E Suunto M9 Jamo S60 Digidesign 2 82467 KL-8200 LE40A336 Systems SCC 106 1000 R ZBF860W EZW-RT10 NAD T755


manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding



1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101