Reviews & Opinions
Independent and trusted. Read before buy Zanussi ZWD 14581 W!

Zanussi ZWD 14581 W

Manual

Download (English)
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Zanussi ZWD 14581 WAbout Zanussi ZWD 14581 W
Here you can find all about Zanussi ZWD 14581 W like manual and other informations. For example: review.

Zanussi ZWD 14581 W manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Zanussi ZWD 14581 W please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Zanussi ZWD 14581 W photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 2. Page 1 of 1. Average Rating:
daanbrg 4:57pm on Monday, May 10th, 2010 
Large drum is great, quiet cycles although some cycles do take a long time, easy to use.
rainbowdot 11:22am on Thursday, May 6th, 2010 
Simple and easy enough to use Dryer can take an age to dry items Simple and easy enough to use Dryer can take an age to dry items

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

132972390.qxd

18/06/2007

Pagina

User manual

Washerdryer

ZWD 14581 W ZWD 14581 S ZWD 16581 W
Thank you for selecting our appliance
We wish you lots of enjoyment with your new appliance and we hope that you will consider our brand again when purchasing household appliances. Please read this user manual carefully and keep it throughout the product life cycle as a reference document. The user manual should be passed on to any future owner of the appliance.
The following symbols are used in this manual: Important information concerning your personal safety and information on how to avoid damaging the appliance. General information and tips Environmental information

Content

Safety information - - - - - - - - - - - - - - - - - - -3 Description of the appliance - - - - - - - - - - - -5 Detergent dispenser drawer - - - - - - - - - - - -5 Control panel and functions - - - - - - - - - - - -6 Programme table - - - - - - - - - - - - - - - - - - -8 Drying programmes - - - - - - - - - - - - - - - - -11 Programme information - - - - - - - - - - - - - -12 Washing and drying hints - - - - - - - - - - - - -13 Before the first use - - - - - - - - - - - - - - - - -16 Operating Sequence - - - - - - - - - - - - - - - -Washing - - - - - - - - - - - - - - - - - - - - - - - - -17 Drying - - - - - - - - - - - - - - - - - - - - - - - - - -23 Care and cleaning - - - - - - - - - - - - - - - - - -24 Something not working - - - - - - - - - - - - - - 27 Technical data- - - - - - - - - - - - - - - - - - - - - 30 Consumption values - - - - - - - - - - - - - - - - 31 Installation instruction - - - - - - - - - - - - - - - 32 Fitting under a counter- - - - - - - - - - - - - - - 36 Environmental concerns - - - - - - - - - - - - - 37 Guarantee conditions - - - - - - - - - - - - - - - 38

Safety information

In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features. Save these instructions and make sure that they remain with the appliance if it is moved or sold, so that everyone using it through its life will be properly informed on appliance use and safety.
Always unplug the appliance and turn off the water supply after use, clean and maintenance. Under no circumstances should you attempt to repair the machine yourself. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact your local Service Centre. Always insist on genuine spare parts.

Installation

General safety
It is dangerous to alter the specifications or attempt to modify this product in any way. During high temperature washing and drying programmes the door glass may get hot. Do not touch it! Make sure that small pets do not climb into the drum. To avoid this, please check into the drum before using. Any objects such as coins, safety pins, nails, screws, stones or any other hard, sharp material can cause extensive damage and must not be placed into the machine. Only use the advised quantities of fabric softener and detergent. Damage to the fabric can ensue if you over-fill. Refer to the manufacturers recommendations of quantities. Wash small items such as socks, laces, washable belts etc in a washing bag or pillow case as it is possible for such items to slip down between the tub and the inner drum. Do not use your washer-dryer to wash articles with whalebones, material without hems or torn material.

This appliance is heavy. Care should be taken when moving it. When unpacking the appliance, check that it is not damaged. If in doubt, do not use it and contact the Service Centre. All packing and transit bolts must be removed before use. Serious damage can occur to the product and to property if this is not adhered to. See relevant section in the user manual. After having installed the appliance, check that it is not standing on the inlet and drain hose and the worktop is not pressing the electrical supply cable. If the machine is situated on a carpeted floor, please adjust the feet in order to allow air to circulate freely. Always be sure, that there is no water leakage from hoses and their connections after the installation. If the appliance is installed in a location subject to frost, please read the dangers of freezing chapter. Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person. Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.
This appliance is designed for domestic use. It must not be used for purposes other than those for which it was designed. Only wash and dry fabrics which are designed to be machine washed and dried. Follow the instructions on each garment label. Do not overload the appliance. See the relevant section in the user manual. Before washing, ensure that all pockets are empty and buttons and zips are fastened. Avoid washing frayed or torn articles and treat stains such as paint, ink, rust, and grass before washing. Underwired bras must NOT be machine washed. Garments which have been in contact with volatile petroleum products should not be machine washed. If volatile cleaning fluids are used, care should be taken to ensure that the fluid is removed from the garment before placing in the machine. As some duvets and eiderdowns should be washed/dried in large commercial machines because of their bulk, please check with the manufacturer of the item before washing in a domestic machine. The users should always check that they have not left their gas lighters (disposable or otherwise) in their clothing. Never tumble dry items that have had contact with chemicals such as dry cleaning fluid.These are of a volatile nature and could cause an explosion. Only tumble dry items which have been washed in water or require airing. Plastic detergent dispensers should not remain in the drum during the drying cycle, as the plastic used is not designed to withstand the heat. If you wish to washthrough-to-dry you should use the conventional detergent dispenser drawer.

2 Temperature button

3 Spin reduction button

4 Dry button

5 Drying Time button
By depressing this button you can select a timed drying programme for cotton or synthetics, the relevant light illuminates. To select the drying time push the button until the time you want appears in the display according to the fabrics (cotton or synthetics) you have to dry. For Cottons you can select a drying time from 10 minutes to 130 minutes (2.10). For Synthetics you can select a drying time from 10 minutes to 130 minutes (2.10). By means of this button, the machine performs some additional rinses. The display shows the following information: duration of the selected programme, delayed start, incorrect option selection, alarm codes, drying time, drying cycle, washing phases, child safety lock and end of programme.

6 Extra Rinse button

Display

8 Start/Pause button

The Start/Pause button allows to start the selected programme; the corresponding green pilot light stops flashing. This button interrupts also a programme which is running, the corresponding green pilot light starts to flash.

9 Delay Start button

The wash programme can be delayed from 30 min - 60 min - 90 min, 2 hours and then by 1 hour up to a maximum of 20 hours by means of this button.
Programme table - Proportional programmes
Programme/ Temperature Type of laundry White and coloured cotton (Normally soiled): e.g. sheets, tablecloths, household linen, towels. White and fast coloured cotton (normally or lightly soiled items): sheets, household linen, underwear Synthetic or mixed fabrics, underwear, coloured garments, nonshrink shirts, blouses. Options Description of programme Main wash from 95C to Cold 3 rinses Long spin Main wash from 60C to 40C 2 rinses Long spin Main wash from 60C to Cold 3 rinses Short spin

Cotton 95 Proportional

Cotton Eco

Spin red. Extra Rinse

60- 40 proportional

Synthetic

60 proportional

Max load for Handwash/Duvet. 2 kg Max load for Mini 30.. 2.5 kg Max load for Silk..1 kg

Drying programmes

Degree of drying Type of fabric Max Load Spin speed

1600 rpm

Drying time mins
95-105 100-110 45-55 50-60 85-95 90-100 35-45 40-50 70-80 35-45 65-75 70-80 30-40 35-45
Extra dry Ideal for towelling materials

3.5 kg

Cotton and linen (bathrobes, bath towels, etc

1.5 kg

1400 rpm 1600 rpm 1400 rpm 1600 rpm 3 kg

Cupboard dry (*)

1400 rpm 1600 rpm 1400 rpm
Suitable for items to put away without ironing Synthetics and mixed fabrics (jumpers, blouses, underwear, household linen)

2 kg 1 kg

900 rpm 900 rpm 1600 rpm
Iron dry Suitable for ironing
Cotton and linen (sheets, tablecloths, shirts, etc.)
(*) The Cupboard dry drying programme for Cottons is the reference programme for the Energy Label data, in compliance with EC directive 92/75.

Programme information

Eco programmes This programme can be selected for slightly or normally soiled cotton items. The temperature will decrease and the washing time will be extended. This allows to obtain a good washing efficiency by saving energy. Washing programme for delicate fabrics with the hand washing care symbol. Delicate washing programme suitable for silk and mixed synthetics items. Washing temperature is 30C. The maximum spin speed is automatically reduced to 700 rpm. Selecting this programme, the laundry is gently washed and spun to avoid any creasing. In this way ironing is easier. Furthermore the machine will perform additional rinses. Special program at 30C, (the duration is approx. 30 minutes), suitable for laundry to be freshened up: e.g. a sport jacket worn only once or slightly soiled or new garments. Washing programme for a single synthetic duvet, blanket, bedspread etc. The washing temperature is 30C. The spin is performed at 700 rpm. With this programme it is possible to rinse and spin cotton garments which have been washed by hand. The machine performs 3 rinses, followed by a final spin at maximum speed. The spin speed can be reduced by depressing Spin button. For emptying out the water of the last rinse in programmes with the Rinse Hold or Night Cycle option. Turn first the programme selector dial to Off, then select programme Drain and depress the Start/Pause button. Separate spin for hand washed garments and after programmes with Rinse Hold or Night Cycle option. Before selecting this programme the selector dial must be turned to Off. You can choose the speed by means of the relevant button to adapt it to the fabrics to be spun. To reset a programme and to switch off the machine turn the selector dial to Off. Now can a new programme be selected.

Pull out the dispenser drawer until it stops. Measure out the amount of detergent required, pour it into the main wash compartment and, if you wish to carry out the prewash phase, pour it into the compartment marked. If required, pour fabric softener into the compartment marked (the amount used must not exceed the MAX mark in the drawer). Close the drawer gently. 3. Select the required programme
Drying Cottons Synthetics Off Jetsystem+ Cotton Cotton Eco Synthetic Cottons Normal +Prewash +Superquick Normal +Prewash Spin Delicate +Superquick Synthetics Easy Iron 40 Handwash Silk Duvet Mini 30' Special Rinse Drain
4. Select the temperature
Press this button repeatedly to increase or decrease the temperature, if you want your laundry to be washed at a temperature different from the one proposed by the washing machine.Maximum temperatures are 95C for Cottons, 60C for Synthetics, 40C for Easy Iron, Delicate, Handwash, 30C for Silk, Duvet and Mini 30, while corresponds to cold wash.
The selector dial is divided into the following sections: Jetsystem+ (Proportional programmes), Cottons (Normal programmes), 17
5. Select the spin speed or Night Cycle or Rinse Hold option ZWD 14581W - S ZWD 16581W

900 700

When the programme has finished, the Start/Pause light goes off, on the display appears a flashing zero 0.00, the Lock light is alight and the door is locked to indicate that the water must be emptied out. To empty out the water: 1. turn the programme selector dial to Off 2. select the Drain or Spin programme 3. reduce the spin speed if needed, by means of the relevant button 4. depress Start/Pause button 5. at the end of programme, the display shows a flashing zero 0.00 and the Lock light goes off (and it will be possible to open the door). Programme Option buttons Depending on the programme, different functions can be combined. These must be selected after choosing the desired programme and before depressing the Start/Pause button. In any case, if an option is chosen that is not allowed with the selected programme or option, the message Err will be displayed on the display for few seconds, and the integrated red Start/Pause light start flashing. IMPORTANT! For the compatibility of the options with the washing programmes, please refer to the Programme table. 6. Select Dry option
Press the Spin button repeatedly to change the spin speed, if you want your laundry to be spun at a speed different from the one proposed by the appliance. The relevant light will light up. Maximum speeds are: Cottons: 1600, 1400 rpm depending on the model; Synthetics, Handwash: 900 rpm Delicates, Mini 30, Silk and Duvet: 700 rpm; Night Cycle : by selecting this option, the machine will not drain the water of the last rinse, so as not to crease the laundry. As all spinning phases are suppressed, this washing cycle is very noiseless and it can be selectionned at night or in times with a more economical power rate. On Cotton, Synthetics, Delicates, Silk programmes the rinses will be performed with more water. When the programme has finished, the Start/Pause light goes off, the display shows a flashing zero 0.00, the Lock light is alight and the door is blocked to indicate that the water must be emptied out. Rinse Hold : by selecting this option the water of the last rinse is not emptied out to prevent the fabrics from creasing. 18

5. Press the Start/Pause button to start the programme. 6. At the end of the programme, the buzzer sounds. Three flashing zeroes 0.00 will appear on the display. At this point, begins an anti-crease phase, which lasts for about 10 minutes. The door can be opened only at the end of this phase. Note! If you whish to open the door before the anticrease phase or to interrupt it, press any key or turn the programme selector dial to any

Care and cleaning

IMPORTANT! You must DISCONNECT the appliance from the electricity supply, before you can carry out any cleaning or maintenance work. Descaling The water we use normally contains lime. It is a good idea to periodically use a water softening powder in the machine. Do this separately from any laundry washing, and according to the softening powder manufacturer's instructions. This will help to prevent the formation of lime deposits. Maintenance Wash With the use of low temperature washes it is possible to get a build up of residues inside the drum. We recommend that a maintenance wash be performed on a regular basis. To run a maintenance wash: The drum should be empty of laundry. Select the hottest cotton wash programme. Use a normal measure of detergent, must be a powder with biological properties. External cleaning Clean the exterior cabinet of the appliance with soap and water only, and then dry thoroughly. Cleaning the dispenser drawer The washing powder and additive dispenser drawer should be cleaned regularly. Remove the drawer by pressing the catch downwards and by pulling it out. Flush it out under a tap, to remove any traces of accumulated powder. Cleaning the drawer recess Having removed the drawer, use a small brush to clean the recess, ensuring that all washing powder residue is removed from the upper and lower part of the recess. Replace the drawer and run the rinse programme without any clothes in the drum. Cleaning the pump The pump should be inspected if the machine does not empty and/or spin the machine makes an unusual noise during draining due to objects such as safety pins, coins etc. blocking the pump. Proceed as follows: disconnect the appliance. if the appliance is operating, wait, if necessary, until the water has cooled down. open the pump door levering on the groove with a coin or with the suitable tool, that you can find in the bag containing the instruction booklet (or fitted on the appropriate recess behind the detergent dispenser drawer depending on the model). place a bowl with a small edge close to the pump to collect any spillage

The washer-dryer does not start:
The machine does not fill:
Malfunction The machine fills then empties immediately:
Possible Cause / Solution The end of the drain hose is too low. Refer to relevant paragraph in water drainage section. The drain hose is squashed or kinked. E20) Check the drain hose connection. The drain pump is clogged. E20 Clean the drain pump. The option or has been selected. Select the Drain or Spin programmes The laundry is not evenly distributed in the drum. Redistribute the laundry. Too much detergent or unsuitable detergent (creates too much foam) has been used. Reduce the detergent quantity or use another one. Check whether there are any leaks from one of the inlet hose fittings. It is not always easy to see this as the water runs down the hose; check to see if it is damp. Check the water inlet hose connection. The inlet hose is damaged. Change it with a new one. The cap on the emergency emptying hose has not been replaced after cleaning the pump. Put the cap back on the emergency emptying and place the latter back in its seat. Too little detergent or unsuitable detergent has been used. Increase the detergent quantity or use another one. Stubborn stains have not been treated prior to washing. Use commercial products to treat the stubborn stains. The correct temperature was not selected. Check if you have selected the correct temperature. Excessive laundry load. Introduce into the drum less laundry.
The machine does not empty and/or does not spin:
There is water on the floor:
Unsatisfactory washing results:

Malfunction

Possible Cause / Solution The programme is still running. Wait the end of washing cycle. The door lock has not been released. Wait about 2 minute. There is water in the drum. Select drain or spin programme to empty out the water. The transit bolts and packing have not been removed. Check the correct installation of the appliance. The support feet have not been adjusted. Check the correct levelling of the appliance. The laundry is not evenly distributed in the drum. Redistribute the laundry. Maybe there is very little laundry in the drum. Load more laundry. The electronic unbalance detection device has cut in because the laundry is not evenly distributed in the drum. The laundry is redistributed by reverse rotation of the drum. This may happen several times before the unbalance disappears and normal spinning can resume. If, after 10 minutes, the laundry is still not evenly distributed in the drum, the machine will not spin. In this case, redistribute the load manually and select the spin programme. Redistribute the laundry.

The door will not open:

The machine vibrates or is noisy:

1. After removing all the packaging, carefully lay machine on its back to remove the polystyrene base from the bottom. 2. Remove the power supply cable and the draining hose from the hose holders on the rear of the appliance.
6. Open the porthole, take out the inlet hose from the drum and remove the polystyrene block fitted with the adhesive tape on the door seal.Open the porthole, take out the inlet hose from the drum and remove the polystyrene block fitted with the adhesive tape on the door seal. 7. Fill the smaller upper hole and the two large ones with the corresponding plastic plug caps supplied in the bag containing the instruction booklet. Positioning Install the machine on a flat hard floor. Make sure that air circulation around the machine is not impeded by carpets, rugs etc. Check that the machine does not touch the wall or other kitchen units. Level the washer-dryer by raising or lowering the feet. The feet may be tight to adjust as they incorporate a self locking nut, but the machine MUST be level and stable. If necessary, check the setting with a spirit level. Any necessary adjustment can be made with a spanner. Accurate levelling prevents vibration, noise and displacement of the machine during operation.Never place cardboard, wood or similar materials under the machine to compensate for any unevenness in the floor.

C B C B

3. With a suitable spanner unscrew and remove the central rear bolt A. 4. Unscrew and remove the two large rear bolts B and the six smaller bolts C.
Water inlet An inlet hose is supplied and can been found inside the machine drum. Do not use the hose from your previous machine to connect to the water supply. 1. Open the porthole and extract the inlet hose. 2. Connect the hose with the angled connection to the machine. Do not place the inlet hose downwards. Angle the hose to the left or right depending on the position of your water tap. 3. Set the hose correctly by loosening the ring nut. After positioning the inlet hose, be sure to tighten the ring nut again to prevent leaks. 4. Connect the hose to a tap with a 3/4 thread. Always use the hose supplied with the appliance. The inlet hose must not be lengthened. If it is too short and you do not wish to move the tap, you will have to purchase a new, longer hose specially designed for this type of use.
The appliance must be connected to a cold water supply. A minimum water pressure of 0.05 MPa (0.5 bar) is required for safe operation of the appliance. If you cannot make the cold water connection direct from the rising mains, you may be able to operate the appliance from your cold water storage system. There should be a minimum distance of 5.02m (16.5 ft) between the appliances inlet and the bottom of the water storage tank. Water drainage This appliance is designed to be permanently plumbed into your home's drainage system using one of the following methods. 1. Into a drainage standpipe.

U piece supplied

NOTE Installation should comply with local water authority and building regulations requirements.
Firstly form a hook in the end of the drain hose using the U piece supplied. Place the drain hose into your standpipe, which should have an internal diameter of approximately 38mm thus ensuring there is an air break between the drain hose and standpipe. When discharging into a standpipe ensure that the top of the standpipe is no more than 90 cm (35.4'') and no less than 60 cm (23.6'') above floor level. 33

30 cm (12")

Special
Sport 40 Sport Shoes 40 Silk Mini 30'

Eco 60

Cottons
Prewash Intensive Super Quick Spin Options Extra Rinse
40 Eco 40 Synthetics Spin Drain Rinse Delicates Easy Iron 40

Wash Door End

1000 6kg

Cold Hand Wash 30 Wool

ZWF10070W
38 mm (11.2) standpipe diameter

Min. 60 cm (23.6)

Max. 90 cm (35.4)
Level the washer-dryer by raising or lowering the feet. The feet may be tight to adjust as they incorporate a self locking nut, but the machine MUST be level and stable. Any necessary adjustment can be made with a spanner. Accurate levelling prevents vibration, noise and displacement of the machine during operation. Some vibration is inevitable, especially if mounted on a wooden floor. Sprung wooden floors are particularly susceptible to vibration. For advice, consult a builder. If possible, always place the machine on a solid floor. Special conditions If the floor is carpeted or covered with crumbly or soft material, insert a rigid support base under the feet to prevent noise, vibration or displacement. The base should protrude a few centimetres beyond the edges of the machine. WARNING! The machine should NOT be placed on deep pile carpeting.
The drain hose may be extended to a maximum of 4 metres. An additional drain hose and joining piece is available from your local Service Force Centre. The joining piece must have an internal diameter of 18mm. If your drain hose looks like this (see below) you do not require the U piece. Just push the hose firmly into the standpipe. 2. Onto a sink outlet spigot. If the outlet spigot has not been used before, remove any blanking plug that may be in place.
Push the drain hose onto the spigot and secure with a clip if required, ensure a loop is formed in the drain hose (see diagram) to prevent waste from the sink entering the washer-dryer. Important! Before connecting the machine to new pipework or to pipework that has not been used for some time, run off a reasonable amount of water to flush out any debris that may have collected in the pipes. Levelling 34

NOTE Please ensure that when the appliance is installed it is easily accessible for the engineer in the event of a breakdown. In the interest of the environment washer-dryers and dishwashers should be connected to the FOUL drainage system, the water will then be taken to a sewage works for treatment before being discharged safely into a river. It is essential that these appliances are not connected to the surface water drainage system as this water is discharged directly into a river or stream and may cause pollution.
If you require any further advice please contact your local water authority.
The wires in the mains lead are coloured in accordance with the following code: Green and Yellow..- Earth Blue..- Neutral Brown..- Live

GREEN & YELLOW

SHOWER SINK BATH TOILET BIDET
WASHING MACHINE RAINWATER 'RUN-OFF' DISHWASHER

FOUL DRAIN

SURFACE WATER DRAINS & SEWERS
FOUL SEWERS SEWAGE TREATMENT WORKS TREATED DISCHARGE

CORD CLAMP

The wire coloured green and yellow must be connected to the terminal marked with the letter E or by the earth symbol or

UNTREATED DISCHARGE

coloured green and yellow. The wire coloured blue must be connected to the terminal marked N or coloured black. The wire coloured brown must be connected to the terminal marked L or coloured red. Upon completion there must be no cut, or stray strands of wire present and the cord clamp must be secure over the outer sheath. WARNING! A cut off plug inserted into a 13 amp socket is a serious safety (shock) hazard. Ensure that the cut off plug is disposed of safely. Should the appliance power supply cable need to be replaced, this must be carried out by our Service Force Centre. The power supply cable must be easily accessible after installing the appliance. Permanent connection In the case of permanent connection it is necessary that you install a double pole switch between the appliance and the electricity supply (mains), with a minimum gap of 3mm between the switch contacts and of a type suitable for the required load in compliance with the current electrical regulations. The switch must not break the yellow and green earth cable at any point.

Electrical connection Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. WARNING! This appliance must be earthed. The manufacturer declines any liability should this safety measure not be observed. Before switching on, make sure the electricity supply voltage is the same as that indicated on the appliances rating plate. IMPORTANT! Information on the electrical connection is given on the rating plate on the inner edge of the appliance door. The appliance is supplied with a 13amp plug fitted. In the event of having to change the fuse in the plug supplied, a 13amp ASTA approved (BS1363/A) fuse must be used. Should the plug need to be replaced for any reason, proceed as described below.

Fitting under a counter

WARNING! Before any work to the appliance, you must disconnect the plug from the power socket. Important! For safety reasons, it is dangerous to fit the appliance under a counter without the steel plate, which you can order in your nearest Service Force Centre. The top must be fixed to the cabinet as follows: Unscrew the screws from the back panel of the appliance. Push the worktop to the back and raise it to remove. (see the picture below).

820 600

Environmental concerns
Packaging materials The materials marked with the symbol are recyclable. >PE<=polyethylene >PS<=polystyrene >PP<=polypropylene This means that they can be recycled by disposing of them properly in appropriate collection containers. Old machine Use authorised disposal sites for your old appliance. Help to keep your country tidy! The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product. Ecological hints To save water, energy and to help protect the environment, we recommend that you follow these tips: Normally soiled laundry may be washed without prewashing in order to save detergent, water and time (the environment is protected too!). The machine works more economically if it is fully loaded. With adequate pre-treatment, stains and limited soiling can be removed; the laundry can then be washed at a lower temperature. Measure out detergent according to the water hardness, the degree of soiling and the quantity of laundry being washed.

For Customer Service in The Republic of Ireland please contact us at the address below: Electrolux Group (Irl) Ltd Long Mile Road, Dublin 12, Republic of Ireland Tel: + 353 (0)Email: service.eid@electrolux.ie
European guarantee This appliance is guaranteed by Electrolux, in each of the countries listed in the following page, for the period specified in the appliance guarantee or otherwise by law. If you move from one of these countries to another of these countries the appliance guarantee will move with you subject to the following qualifications:
The appliance guarantee starts from the date you first purchased the appliance which will be evidenced by production of a valid purchase document issued by seller of the appliance. The appliance guarantee is for the same period and to the same extent for labour and parts as exists in your country of residence for this particular model or range of appliances. The appliance guarantee is personal to the original purchaser of the appliance and cannot be transferred to another user. The appliance is installed and used in accordance with instructions issued by Electrolux and is only used within the home, i.e. is not used for commercial purposes. The appliance is installed in accordance with all relevant regulations in force within your new country of residence.
The provisions of this European Guarantee do not affect any of the rights granted to you by law.

www.electrolux.com

Albania Belgique/Belgi/Belgien esk republika Danmark Deutschland Eesti Espaa France Great Britain Hellas Hrvatska Ireland Italia Latvija Lituania Luxembourg Magyarorszg Nederland Norge sterreich Polska Portugal Romania Schweiz-Suisse-Svizzera Slovenija Slovensko Suomi Sverige Trkiye
+450 +44 ++00 +622 +030 +88 www.electrolux.fr +++338 +753 +39 (0) +34 +609 +++300 +222 ++300 ++30 +111 +731 +www.electrolux.fi +46 (0)++937 7837
Rr. Pjeter Bogdani Nr. 7 Tirane Bergensesteenweg 719, 1502 Lembeek Budjovick 3, Praha 4, Sjllandsgade 2, 7000 Fredericia Muggenhofer Str. 135, 90429 Nrnberg Mustame tee 24, 10621 Tallinn Carretera M-300, Km. 29,900 Alcal de Henares Madrid Addington Way, Luton, Bedfordshire LU4 9QQ 4, Limnou Str., 54627 Thessaloniki Slavonska avenija 3, 10000 Zagreb Longmile Road Dublin 12 C.so Lino Zanussi, 26 - 33080 Porcia (PN) Kr. Barona iela 130/2, LV-1012, Riga Verkiu,2 9, 09108 Vilnius, Lithuania Rue de Bitbourg, 7, L-1273 Hamm H-1142 Budapest XIV, Erzsbet kirlyn tja 87 Vennootsweg 1, 2404 CG - Alphen aan den Rijn Rislkkvn. 2 , 0508 Oslo Herziggasse 9, 1230 Wien ul. Kolejowa 5/7, Warsaw Quinta da Fonte - Edificio Gonalves Zarco - Q35 -2774-518 Pao de Arcos Str. Garii Progresului 2, S4, 040671 RO Industriestrasse 10, CH-5506 Mgenwil Tr aka 132, 1000 Ljubljana Electrolux Slovakia s.r.o., Electrolux Domce spotrebie SK, Seberniho 1, Bratislava Electrolux Service, S:t Gransgatan 143, S-Stockholm Tarlabai caddesi no : 35 Taksim Istanbul

 

Tags

HT-TZ122 Alesis Adat Phone 9 10 Murano-2003 P2470HD LE52A656a1F Sedona PS42A456p2D PCG-R600hfpd A1250 SCX-3205W WX-4000 301 V CM148 KDL-20S4000 SA10113 VSX-D1011-K Button Alcatel-lucent 4038 EW543F EL1750P WVC54GC TL 600 Reissue ATS-606A Review Dm 601 Ws PRO Threat-hotkeys Faxphone 21 SA-HE90 QSG 6053 NC6000 HR16B DVD-SH893 HT-XQ100TS Shot Z115 WE 235 TM506 Temporis 27 SD2005 XM5540 Combo AF-200FG D-irrigation KX-TC1520B FC8202 QG3150 30 GA-P35-ds3 PL407 4000N KR803K BAR926HG AVR 435 DVD-VR335 Digitech S200 SPH-M300 CPU-01015B NMW25IX Multi-piattaforma 2 DPL950VD-radio BDP-09FD AX458XN 32LG40 KB9820E-M Blackberry 6220 Vitotronic 200 Coolpix S2 The Wolf 4 0 Gr-axm225 TM-U590 Kardon 330B KDC-217S KDL-32EX713 AVR-1082 P70-RED R-96ST Avic-F9210BT 42HMC WA63121 Magic III SGH-J808 NV-HD660 PD-11 6 16V PDR-9750 VPN05L IC-E80D Nvds60EG PRO U300 MHC-EC55 FS-1500 9565CV CQ-C5310U ZDI101X T55540 LE46C550 B3101-4-M UK Serie 2

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101