132984950I.qxd

13/09/2005

Pagina

(Nero/Process Black pellicola)
LAVATRICE LAVE-LINGE WASCHAUTOMAT WASHING MACHINE

ZWF 1200 ZWF 1400

ZWF 1200

8H 4H 2H

132984950
LIBRETTO ISTRUZIONI NOTICE DUTILISATION GEBRAUCHSANWEISUNG USER MANUAL

I F D GB

132984950GB.qxd

Dear customer,

Please read these operating instructions carefully and pay particular attention to the safety notes indicated in the first pages. We recommend that you keep this instruction booklet for future reference and pass it on to any future owners.

Transport damages

When unpacking the appliance, check that it is not damaged. If in doubt, do not use it and contact the Service Centre. The symbols you will see on some paragraphs of this booklet have the following meaning: The warning triangle and/or the key words (Warning!, Caution!) emphasize information that is particularly important for your safety or correct functioning of the appliance. The information marked with this symbol provides additional instructions and practical tips on the use of the appliance. Tips and information about economical and ecological use of the machine are marked with this symbol.
Our contribution to the protection of the environment: we use recycled paper.

Contents

Warnings Disposal Tips for environmental protection Technical specifications Installation
Unpacking Positioning and levelling Assembly upon a stand kit Water inlet Water drainage Electrical connection
Sorting the laundry Temperatures Before loading the laundry Maximum loads Laundry weights Removing stains Detergents and additives International wash code symbols Operating sequence Programme tables

71-72 73-74

Maintenance
Bodywork Door seal Detergent dispenser drawer Water inlet filter Drain pump Emergency emptying out Frost precautions

Your new washing machine

Detergent dispenser drawer
Control panel Controls Washing hints

66 66-60

Something not working?

Warnings

The following warnings are provided in the interests of overall safety. You must read them carefully before installing or using the appliance.

Installation

All internal packing must be removed before using the appliance. Serious damage may be caused to the machine or adjacent furniture if the protective transit devices are not removed or are not completely removed. Refer to the relevant paragraph in the instruction book. Any electrical work required to install this appliance must be carried out by a qualified electrician. Any plumbing work required to install this appliance must be carried out by a qualified plumber. After having installed the machine, check that it is not standing on its electrical supply cable. If the appliance is placed on a carpeted floor, ensure that air can circulate freely between the feet and the floor.
Always unplug the appliance and shut the water tap after use.

General safety

Repairs to the machine must be carried out only by qualified personnel. Repairs carried out by inexperienced persons could cause serious danger. Contact your local Service Centre. Never pull the power supply cable to remove the plug from the socket; always take hold of the plug itself. During high temperature wash programmes the door glass may get hot. Do not touch it!

Child safety

Children are often not aware of how dangerous electrical appliances can be. When the machine is working, children should be carefully supervised and not be allowed to play with the appliance. The packaging components (e.g. plastic film, polystyrene) can be dangerous to children danger of suffocation! Keep them out of childrens reach. Keep all detergents in a safe place out of childrens reach. This machine incorporates a special child safety feature to prevent small children from being trapped inside the machine. To activate this device, rotate the button (without pressing it) inside the door clockwise until the groove is horizontal. If necessary use a coin. To disable this device and restore the possibility of closing the door, rotate the button anti-clockwise until the groove is vertical.
This appliance is designed for domestic use. It must not be used for purposes other than those for which it was designed. Only wash fabrics which are designed to be machine washed. Follow the instructions on each garment label. Do not overload the appliance. Follow the instructions in the instruction book. Make sure that all pockets are empty. Objects such as coins, safety pins, pins and screws can cause extensive damage. Do not machine wash garments saturated with petroleum, methylated spirits, trichlorethylene, etc. If such fluids have been used to remove stains prior to washing, wait until they have completely evaporated from the fabric before placing garments in the appliance. Place small items such as socks, belts, etc. in a cloth bag or pillowcase to prevent them getting trapped between the drum and the tub. Use only the recommended quantities of fabric softener. An excessive amount could damage the laundry. Leave the porthole door slightly ajar when the appliance is not in use. This preserves the door seal and prevents the formation of musty smells. Always check that water has emptied out before opening the door. If not, drain the water following the instructions in the instruction book. 61

When the appliance is to be scrapped, cut off the electrical supply cable and destroy the plug with the remaining cable. Disable the door catch in order to prevent children from becoming trapped inside while playing.

Disposal

Packaging materials
The materials marked with the symbol recyclable. >PE<=polyethylene >PS<=polystyrene >PP<=polypropylene This means that they can be recycled by disposing of them properly in appropriate collection containers. are The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

Machine

Use authorised disposal sites for your old appliance. Help to keep your country tidy!
Tips for environmental protection

ENGLISH

To save water, energy and to help protect the environment, we recommend that you follow these tips: Normally soiled laundry may be washed without prewashing in order to save detergent, water and time (the environment is protected too!). The machine works more economically if it is fully loaded. Do not overload! With adequate pre-treatment, stains and limited soiling can be removed; the laundry can then be washed at a lower temperature. Measure out detergent according to the water hardness, the degree of soiling and the quantity of laundry being washed.

Technical specifications

DIMENSIONS Height Width Depth Cotton Synthetics Delicates Woollens, handwash 85 cm 60 cm 59 cm 5 kg 2.5 kg 2.5 kg 2 kg 1200 rpm max. (ZWF 1200) 1400 rpm max. (ZWF 1400) 220-230 V/50 Hz 2200 W 10 A 0,05 MPa 0,8 MPa

MAXIMUM LOAD

SPIN SPEED
POWER SUPPLY VOLTAGE/FREQUENCY TOTAL POWER ABSORBED MINIMUM FUSE PROTECTION WATER PRESSURE Minimum Maximum
This appliance complies with the following EEC Directives: 73/23/EEC of 19/02/73 relating to low voltage 62

Unpacking

All transit bolts and packing must be removed before using the appliance. You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again. 1. Using a spanner, unscrew and remove the two rear bottom screws. Slide out the two plastic pins. 6. Set the machine upright and remove the remaining rear screw. Slide out the relevant pin. 7. Plug all the holes with the plugs which you will find in the envelope containing the instruction booklet.

Positioning and levelling
Install the machine on a flat hard floor. Make sure that air circulation around the machine is not impeded by carpets, rugs etc. Check that the machine does not touch the wall or other kitchen units. Carefully level by screwing the adjustable feet in or out. Never place cardboard, wood or similar materials under the machine to compensate for any unevenness in the floor.
2. Lay the machine on its back, taking care not to squash the hoses. This can be avoided by placing one of the corner packing pieces between the machine and the floor. 3. Remove the polystyrene block from the bottom of the machine and release the two plastic bags.
4. Very carefully slide out the left polythene bag, removing it towards the right and then downwards. 5. Very carefully slide out the right polythene bag, removing it towards the left and then upwards.
Assembly upon a stand kit
Stand Dimension: Height: 30 cm. Width: 60 cm. Depth: 60 cm.
This appliance can be installed upon a steel Stand with Drawer to make the loading and unloading of your laundry easier. Please ask to authorized dealer the suitable stand kit.

Water inlet

Connect the water inlet hose supplied with the machine to a tap with a 3/4" thread. Do not use already employed hoses for water connection. The other end of the inlet hose which connects to the machine can be turned in any direction. Simply loosen the fitting, rotate the hose and retighten the fitting, making sure there are no water leaks.
Directly into a drain pipe at a height of not less than 60 cm and not more than 90 cm. The end of the drain hose must always be ventilated, i.e. the inside diameter of the drain pipe must be larger than the outside diameter of the drain hose. Any extension applied to the drainage hose should not be longer than 200 cm and its diameter must not be smaller than that of the original hose. Use a suitable fitting for the connection.
The drain hose must not be kinked. For a correct functioning of the machine the drain hose must remain hooked on the proper support piece situated on the top part of the back side of the appliance.
Important! Before connecting up the machine to new pipework or to pipework that has not been used for some time, run off a reasonable amount of water to flush out any debris that may have collected in the pipes.

Electrical connection

This machine is designed to operate on a 220-230 V, single-phase, 50 Hz supply. Check that your domestic electrical installation can take the maximum load required (2.2 kW), also taking into account any other appliances in use. Connect the machine to an earthed socket. The manufacturer declines any responsibility for damage or injury through failure to comply with the above safety precaution. Should the appliance power supply cable need to be replaced, this should be carried out by our Service Centre. Please ensure that when the appliance is installed the power supply cable is easily accessible.

Water drainage

The end of the drain hose can be positioned in three ways: Hooked over the edge of a sink using the plastic hose guide supplied with the machine. In this case, make sure the end cannot come unhooked when the machine is emptying. This could be done by tying it to the tap with a piece of string or attaching it to the wall.
In a sink drain pipe branch. This branch must be above the trap so that the bend is at least 60 cm above the ground.
The inlet hose must not be lengthened. If it is too short and you do not wish to move the tap, you will have to purchase a new, longer hose specially designed for this type of use.
This new machine meets all modern requirements for effective treatment of laundry with low water, energy and detergent consumption. The programme selector dial combines the function of programme and temperature selection, making it easier to set the programme. The delay start allows you to delay the programme start by 2 to 12 hours (e.g. to times with a more economical power rate). The special wool programme with its new delicate wash system treats your woollens with extreme care. The automatic cooling of the washing water from 95 to 60C before draining will prevent old drain pipes from being deformed and will reduce thermal shock to fabrics, helping to prevent creasing. The unbalance detection device prevents vibration during spinning. The ECO valve allows total use of detergent and reduces water consumption so saving energy.
1 Detergent dispenser drawer 2 Control panel 3 Door handle
4 Drain pump 5 Adjustable feet
Prewash Main wash Fabric softener, starch

Control panel

Programme Option buttons
Depending on the programme, different functions can be combined. These must be selected after choosing the desired programme and before depressing the START/PAUSE button. When these buttons are pressed, the corresponding pilot lights come on. When they are pressed again, the pilot lights go out. If an incorrect option is selected, the pilot lights flash for about 2 seconds.

3 HALF LOAD button

Select this button to reduce water consumption on the rinse phase when washing a smaller load of cottons or linens (maximum load size = 2,5 kg). The machine will perform 2 rinses instead of 3. This function can be used also for synthetic, handwash, wool and delicate programmes, in case of reduced load of laundry (less then the maximum load size).

Washing hints

Sorting the laundry
Follow the wash code symbols on each garment label and the manufacturers washing instructions. Sort the laundry as follows: whites, coloureds, synthetics, delicates, woollens.

Temperatures 95 60

for normally soiled white cottons and linen (e.g. tea cloths, towels, tablecloths, sheets.) for normally soiled, colour fast garments (e.g. shirts, night dresses, pyjamas.) in linen, cotton or synthetic fibres and for lightly soiled white cotton (e.g. underwear).

Laundry weights

The following weights are indicative: bathrobe napkin quilt cover sheet pillow case tablecloth towelling towel tea cloth night dress ladies briefs mans work shirt g 100 g 700 g 500 g 200 g 250 g 200 g 100 g 200 g 100 g 600 g
(cold) for delicate items (e.g. net curtains), mixed
30-40 laundry including synthetic fibres and
woollens bearing the label pure new wool, machine washable, non-shrink. The wool wash cycle of this machine has been approved by Woolmark for the washing of machine washable Woolmark products provided that the garments are washed according to the instructions on
Before loading the laundry
Never wash whites and coloureds together. Whites may lose their whiteness in the wash. New coloured items may run in the first wash; they should therefore be washed separately the first time. Make sure that no metal objects are left in the laundry (e.g. hair clips, safety pins, pins). Button up pillowcases, close zip fasteners, hooks and poppers. Tie any belts or long tapes. Remove persistent stains before washing. Rub particularly soiled areas with a special detergent or detergent paste.
mans shirt mans pyjamas blouse mens underpants

200 g 500 g 100 g 100 g

balance of nature. The choice of detergent will depend on the type of fabric (delicates, woollens, cottons, etc.), the colour, washing temperature and degree of soiling. All commonly available washing machine detergents may be used in this appliance: powder detergents for all types of fabric, powder detergents for delicate fabrics (60C max) and woollens, - liquid detergents, preferably for low temperature wash programmes (60C max) for all types of fabric, or special for woollens only. The detergent and any additives must be placed in the appropriate compartments of the dispenser drawer before starting the wash programme. If using concentrated powder or liquid detergents, a programme without prewash must be selected. Pour liquid detergent into the dispenser drawer compartment marked just before starting the programme. Any fabric softener or starching additives must be poured into the compartment marked before starting the wash programme. Follow the product manufacturers recommendations on quantities to use and do not exceed the MAX mark in the detergent dispenser drawer.

Degrees of water hardness Degrees Level Characteristic

German dH French T.H.

soft medium hard very hard
0- 7 8-14 15-21 more than 21
0-15 16-25 26-37 more than 37
International wash code symbols
These symbols appear on fabric labels, in order to help you choose the best way to treat your laundry. Energetic wash
Max. wash temperature 95C Delicate wash
Max. wash temperature 60C
Max. wash temperature 40C
Max. wash temperature 30C

Hand wash

Do not wash at all

Bleaching

Bleach in cold water

Do not bleach

Ironing

Hot iron max 200C

Warm iron max 150C

Lukewarm iron max 110C

Do not iron

Dry cleaning

Dry cleaning in all solvents
Dry cleaning in perchlorethylene, petrol, pure alcohol, R 111 & R 113
Dry cleaning in petrol, pure alcohol and R 113 high temperature low temperature Tumble dry

Do not dry clean

Drying

On the line

On clothes hanger

Do not tumble dry

Operating sequence
Before the first wash we recommend that you pour 2 litres of water into the main wash compartment of the detergent drawer in order to activate the ECO valve. Then run a cotton cycle at 95C, with the machine empty, in order to remove any manufacturing residue from the drum and tub. Pour half a measure of detergent into the main wash compartment and start up the machine.
The light of the START/PAUSE button starts to flash.
5. Select the spin speed or option
Turn the selector dial to the required position. ZWF 1400
Place the laundry in the drum, one item at a time, shaking them out as much as possible. Close the door.
6. Select the required options 2. Measure out the detergent
Pull out the dispenser drawer until it stops. Measure out the amount of detergent recommended by the manufacturer in a graduated cup and pour it into the main wash compartment. If you have selected the prewash, pour detergent into the appropriate compartment marked. The light corresponding to the depressed button illuminates.
3. Measure out the additive
If required, pour fabric softener into the compartment marked , without exceeding the MAX mark.
7. Select the DELAY START option
To delay starting of a programme, press the DELAY START button, before starting the machine, until the light corresponding to the required delay illuminates.

C0064 C0065

4. Select the desired programme
Turn the programme selector dial to the desired position.

95 O E60

Open the door.
1. Place the laundry in the drum

8. Start the programme

Depress START/PAUSE-button, the corresponding pilot light stops flashing. The (washing) light illuminates.

If you cannot open the door but you need to open it you have to switch the machine off by turning the programme selector dial to O. After about 2 minutes the door can be opened (pay attention to the water level and temperature!). Select the programme again and depress START/PAUSE to restart it.
13. At the end of the programme
The machine stops automatically. If the anti-crease option has been selected, the light remains lit and the door is blocked to indicate that the water must be emptied out before opening the door. To do this turn the programme selector dial to O and then to programme (drain) or (spin). Select the required spin speed by means of the relevant dial.
If you have selected the hourly countdown.

, the machine starts its

9. Altering an option or a programme
Before you make any change, you must pause the washing machine by pressing the START/PAUSE button. It is possible to change any phase before the programme carries it out. When the programme has started, you can only reset it by turning the programme selector dial to O and then you can select the new programme. The washing water remains in the tub. Start the new programme by depressing the START/PAUSE button. Note: To drain the water before starting the new cycle, you have to cancel the programme and select the cycle.
Switch the machine off by turning the programme selector dial to O. Remove the laundry from the drum and carefully check that the drum is empty so as to avoid any forgotten items being damaged in a subsequent wash (e.g. shrinking) or their colour running into a load of whites. If you do not intend to carry out another wash, close the water tap. Leave the door open to prevent the formation of mildew and unpleasant smells.
10. Interrupting a programme
Depress the START/PAUSE button to interrupt a programme which is running, the corresponding light starts to flash. Depress the same button again to restart the programme.
11. Cancelling a programme
Turn the selector dial to O to cancel a programme which is running. Now you can select a new programme.
12. Opening the door after the programme has started
First set the machine to PAUSE by pressing the START/PAUSE button. If the door does not open in 2 minutes, this means that the water temperature is above 55C, that the water level is above the bottom edge of the door or that the drum is turning. 72

Release of the lock is also indicated by the coming on of the light.

Programme table

WASHING PROGRAMMES
Fabrics Temperature/ Programme Type of laundry Additional functions

/ / SPIN REDUCTION /

Wash load max.
Consumptions* Energy Water Duration kWh lt min.

White cotton

Sheets, household linen, towels, tablecloths

White cotton economy

Slightly soiled sheets, household linen, underwear Fast coloured items, for example hand towels, sheets, underwear, tablecloths, shirts, blouses. Normally soiled Non-fast coloured items, for example underwear, shirts, blouses

SPIN REDUCTION /

Coloured cotton economy

Coloured cotton

/ / SPIN REDUCTION / / / SPIN REDUCTION /

Synthetics

30-4060
Shirts, blouses, underwear, mixed fabrics

2.5 kg

Delicates
Acrylic, viscose, polyester items, curtains

/ SPIN REDUCTION /

Handwash

For wool mixtures, silk

Special programme 40 (cold) for garments bearing the Pure new wool, non-shrink, machine washable label
ECONOMY PROGRAMME For slightly/normally soiled cottons you can use the relevant Economy programme: you will obtain good washing results by saving energy. In compliance with EC directive 92/75, the consumption figures indicated on the energy label refer to the E60 wash programme for cotton. * The consumption data shown on this chart is to be considered purely indicative, as it may vary depending on the quantity and type of laundry, on the inlet water temperature and on the ambient temperature. It refers to the highest temperature for each wash programme. 73

SPECIAL PROGRAMMES

Programme selector dial position Consumptions* Energy kWh Water lt Duration min.

Programme

Programme description

Additional functions

For lightly 2 rinses Minisoiled fabrics Short spin programme

Rinses

For rinsing 3 rinses with liquid hand washed additive, if required items Short spin

For emptying out the water of the last Water draining rinse of programmes with option Separate spin for cotton, Long spin or short spin with synthetics, spin speed 700 rpm and 500 delicates and rpm wool For cancelling the programme which is running or to switch the machine off.

SPIN REDUCTION

Reset/Off
* The consumption data shown on this chart is to be considered purely indicative, as it may vary depending on the quantity and type of laundry, on the inlet water temperature and on the ambient temperature.

1. Bodywork

Clean the outside of the machine with soap and water only. Rinse with clean water and dry with a soft cloth. Important: do not use methylated spirits, solvents or similar products to clean the bodywork. Detergent can also accumulate inside the drawer recess: clean it with an old toothbrush. Refit the drawer after cleaning.

2. Door seal

Check from time to time the door seal and eliminate eventual possible objects that could be trapped in the fold.

4. Water inlet filter

If you notice that the machine is taking longer to fill, check that the filter in the water inlet hose is not blocked. Turn off the water tap. Unscrew the hose from the tap.
Clean the filter with a stiff brush. Screw the hose back onto the tap.
3. Detergent dispenser drawer
After a while, detergents and fabric softeners leave deposits in the drawer. Clean the drawer from time to time by rinsing it under a running tap. To remove the drawer from the machine, press the button in the rear left-hand corner. To facilitate cleaning, the top part of the additive compartments can be removed.

5. Drain pump

The pump should be inspected regularly and particularly if the machine does not empty and/or spin the machine makes an unusual noise during draining due to objects such as safety pins, coins etc. blocking the pump. Proceed as follows:
Disconnect the appliance. If necessary wait until the water has cooled down. Open the pump door.
Place a bowl on the floor to collect any spillage. Pull out the emergency emptying hose, place it in the bowl and remove its cap. When no more water comes out, unscrew the

7. Frost precautions

If the machine is installed in a place where the temperature could drop below 0C, proceed as follows: Remove the plug from the socket. Close the water tap and unscrew the water inlet hose from the tap. Place the end of the emergency emptying hose and that of the inlet hose in a bowl placed on the floor and let water drain out.
Screw the water inlet hose back on and reposition the emergency emptying hose after having put the cap on again. By doing this, any water remaining in the machine is removed, avoiding the formation of ice and, consequently, breakage of the affected parts. When you use the machine again, make sure that the ambient temperature is above 0C. Important! Every time you drain the water through the emergency emptying hose you must pour 2 litres of water into the main wash compartment of the detergent drawer and then run the drain programme. This will activate the ECO valve avoiding that part of the detergent remains unused at next washing.

pump cover and remove it. Remove any objects from the pump impeller by rotating it. Put the cap back on the emergency emptying hose and place the latter back in its seat.
Screw the pump cover fully in. Close the pump door.
6. Emergency emptying out
If the water is not discharged, proceed as follows to empty out the machine: pull out the plug from the power socket; close the water tap; if necessary, wait until the water has cooled down; open the pump door; place a bowl on the floor and place the end of the emergency emptying hose into the bowl. Remove its cap. The water should drain by gravity into the bowl. Whe the bowl is full, put the cap back on the hose. Empty the bowl. Repeat the procedure until water stops flowing out; clean the pump if necessary as previously described; replace the emergency emptying hose in its seat after having plugged it; screw the pump cover again and close the door.
Problems which you can resolve yourself, before calling the After Sales Service. During machine operation it is possible that the light starts to flash: 4 flashes= the door has not been closed 2 flashes= the machine does not empty 1 flash= the machine does not fill. On model ZWF 1400 an acoustic signal will be heard. Once the problem has been eliminated, press the START/PAUSE button to restart the programme. If after all checks, the problem persists, contact your local Service Centre.

Problem

The machine does not start up:

Possible cause

The door is not firmly closed. The machine is not plugged in or there is no power at the socket. The main fuse has blown. The (delay start) option has been selected. The programme selector dial is not positioned correctly and the START/PAUSE button has not been depressed. The water tap is closed. The inlet hose is squashed or kinked. The filter in the inlet hose is blocked. The door is not properly closed.
The machine does not fill:
The machine fills then empties immediately: The machine does not empty and/or does not spin: There is water on the floor:

The end of the drain hose is too low. Refer to relevant paragraph in water drainage section. The drain hose is squashed or kinked. A programme with option selected. The drain pump is clogged. Too much detergent or unsuitable detergent (creates too much foam) has been used. Check whether there are any leaks from one of the inlet hose fittings. It is not always easy to see this as the water runs down the hose; check to see if it is damp. The drain hose is damaged. The cap on the emergency emptying hose has not been replaced after cleaning the pump. or has been
Unsatisfactory washing results:
Too little or too much detergent has been used. An unsuitable detergent has been used. Stubborn stains have not been treated prior to washing. The correct temperature was not selected. Excessive laundry load.
The machine vibrates or is noisy:
The transit bolts and packing have not been removed. The support feet have not been adjusted. The laundry is not evenly distributed in the drum. Maybe there is very little laundry in the drum.

The door will not open:

The programme is still running, the drum is turning. The door lock has not been released. The water level is above the bottom edge of the door. The machine is heating the water.
Water is not visible in the machine: Spinning starts late or the machine does not spin:
The machine, which is the result of modern technology, runs in a very economical way with low water consumption. Performance is nevertheless excellent. The electronic unbalance detection device has cut in because the laundry is not evenly distributed in the drum. The laundry is redistributed by reverse rotation of the drum. This may happen several times before the unbalance disappears and normal spinning can resume. If, after 10 minutes, the laundry is still not evenly distributed in the drum, the machine will not spin. In this case, redistribute the load manually and select the spin programme. The machine is fitted with a type of motor which makes an unusual noise compared with other traditional motors. This new motor ensures a softer start and more even distribution of the laundry in the drum when spinning, as well as increased stability of the machine. This is most probably due to non soluble components contained in modern detergents. It is not a sign of inadequate rinsing. Brush or shake the garments and, if necessary, wash them again. Modern detergents can produce foam even after rinsing, but this will not affect the quality of the wash.
The machine makes an unusual noise
Detergent residue is left after the wash cycle Foam remains after the last rinse
If you are unable to identify or solve the problem, contact our service centre. Before telephoning, make a note of the model, serial number and purchase date of your machine: the Service Centre will require this information.

. Ser. No.

Mod.. Prod. No.

P0042 BD

Ser. No.

Mo Pro d.. d. No.

From the Electrolux Group. The worlds No. 1 choice.
The Electrolux Group is the world's largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx. USD 14 billion in more than 150 countries around the world.

From the Electrolux Group. The worlds No. 1 choice.
The Electrolux Group is the world's largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx. USD 14 billion in more than 150 countries around the world.