WASHING MACHINE ZWF 1237 W ZWF 1437 W

ZWF 1237 W

On/Off
Cotton Daily Cottons Synthetics Delicate Wool/ Handwash

95C 60C 50C 40C 30C

Rinse Hold
Prewash Intensive Extra Quick Super Rinse 40 AA Delay

Start/ Pause

Prewash Wash Rinses Spin Drain

JETSYSTEM

Temp. Spin
Quick Installation Guide: visit our WEB SITE to view an install video
www.video.uk.electrolux.com

132984810

INSTRUCTION BOOKLET
Important Safety Information
It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant warnings. These warnings have been provided in the interest of safety. You MUST read them carefully before installing or using the appliance.

Installation

This appliance is heavy. Care should be taken when moving it. It is dangerous to alter the specifications or attempt to modify this product in any way. All packing and transit bolts must be removed before use. Serious damage can occur to the product and to property if this is not adhered to. See relevant section in instructions. Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person. Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. Care must be taken to ensure that the appliance does not stand on the electrical supply cable. If the machine is situated on a carpeted floor, please adjust the feet in order to allow air to circulate freely.

Child Safety

This appliance is designed to be operated by adults. Children should not be allowed to tamper with the controls or play with the product. Pets and children have been known to climb into washing machines. Please check your drum before use. The glass door becomes very hot during the washing cycle. Keep children away from the vicinity of the appliance whilst it is in operation. Keep all packaging well away from children. Keep all detergents in a safe place out of childrens reach.
Do not overload the appliance. See relevant section in the instruction book. Only wash fabrics which are designed to be machine washed. If in doubt, consult the care label on the clothes. Before washing, ensure that all pockets are empty and buttons and zips are fastened. Avoid washing frayed or torn articles and treat stains such as paint, ink, rust, and grass before washing. Underwired bras must NOT be machine washed. Any objects such as coins, safety pins, nails, screws, stones or any other hard, sharp material can cause extensive damage and must not be placed into the machine. Garments which have been in contact with volatile petroleum products should not be machine washed. If volatile cleaning fluids are used, care should be taken to ensure that the fluid is removed from the garment before placing in the machine. Wash small items such as socks, laces, washable belts etc in a washing bag or pillow case as it is possible for such items to slip down between the tub and the inner drum. Only use the advised quantities of fabric softener. Damage to the fabric can ensue if you over-fill. Refer to the manufacturers recommendations of quantities. As some duvets and eiderdowns should be washed in large commercial machines because of their bulk, please check with the manufacturer of the item before washing in a domestic machine. Leave the porthole door slightly ajar between washes to preserve the door seal. Under no circumstances should you attempt to repair the machine yourself. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact your local Service Force Centre. Always insist on genuine spare parts.

Always unplug the appliance and turn off the water supply after use. 2

Contents

For the User
Important Safety Information Your New Washing Machine Description of the Appliance
Door locked light Detergent dispenser drawer Child safety feature 6-10 6
Wash Care Symbols Washing Programmes Maintenance and Cleaning
Descaling After each wash Maintenance Wash External cleaning Cleaning the dispenser drawer Cleaning the drawer recess Cleaning the pump Cleaning the water inlet filter The dangers of freezing Emergency emptying out

18-18 18-20-21 21-22 22

The Control Panel
Turning the acoustic signal off

Operating Sequence

11-13 Load the laundry 11 Measure out the detergent 11 Measure out the fabric softener 11 Switch the machine on 11 Select the required programme/fabric 11 Select the temperature 11-12 Select the spin speed or the Rinse Hold option 12 Select the desired options 12 Select the Super Rinse or 40AA option 12 Select the Delay Start 12 Start the programme 12 How to change an option or a programme during its cycle 13 How to cancel a programme during its cycle 13 How to open the door during the cycle of a programme 13 End of programme 13 14-15
Something Not Working Service and Spare Parts Guarantee Conditions

For the Installer

Installation Instructions Technical Specifications
Unpacking Positioning Water inlet Water drainage Levelling Special conditions In the interest of the environment Electrical connection 25 25-26 26-27 27

Washing Hints

Which detergent?. And in which form?
Guide to use the Instruction Book
The following symbols will be found in the text to guide you throughout the instructions:
Safety instructions Hints and tips Environmental information

Your New Washing Machine

Your new washing machine, which is fitted with the New Jet System, meets all modern requirements for effective treatment of laundry with low water, energy and detergent consumption. Even small loads are washed economically because the amount of water used is regulated automatically according to the load and type of fabric.
Automatic cooling of the wash water to 60C before draining, with the 95C programme. This reduces thermal shock to fabrics, helping to prevent creasing. The special wool programme with its new delicate wash system treats your woollens with extreme care. The programme progress display shows the differents washing phases. The balance control device ensures that the washing machine remains stable when spinning.

Prewash Intensive Extra Quick Super Rinse 40 AA Delay Start/ Pause Skip

1 On/Off button

Press this button to switch the washing machine on. The display (8) will show three flashing dashes or a flashing zero. You will find more detailed explanations on pages 7-8 (see Display). Press the On/Off button again to switch the machine off.

4 Temp. button

Press this button repeatedly to increase or decrease the temperature, if you want your laundry to be washed at a temperature different from the one proposed by the washing machine. The relevant light will light up. Maximum temperatures are 95C for Cottons and Cotton daily programme, 60C for Synthetics, 40C for delicate fabrics, Wool and fabrics to be handwashed (Wool / Handwash programme). IMPORTANT! By pressing the Temp. and Spin buttons simultaneously for about 3 seconds, the acoustic signal is deactivated at the end of the cycle, when selecting the programmes and in case of an incorrect option selection. By pressing these 2 buttons again the acoustic signal is reactivated.

2 MAINS-ON light

This light is connected to the On/Off button. It lights up when you press the button, and goes out when you press it again.

3 FABRICS button

Press this button repeatedly to select the programme on the basis of the type of laundry to be washed. The light relevant to the selected programme will light up. The machine will propose a temperature and automatically select the maximum spin value provided for the programme you have chosen. You can change these values by operating buttons 4 and 5. Cotton daily To be used for lightly soiled cotton items in order to obtain a good washing performance in a short time. Wool / Handwash When you select this programme, you obtain a particularly delicate wash, suitable for articles of clothing whose label indicates that they must be handwashed.

6 Spin button

Press this button repeatedly to change the spin speed, if you want your laundry to be spun at a speed different from the one proposed by the washing machine. The relevant light will light up. Maximum speeds are: for cotton: 1,400 rpm (ZWF 1437 W) 1,200 rpm (ZWF 1237 W); for synthetic fabrics, wool and fabrics to be handwashed: 900 rpm; for delicate fabrics: 700 rpm.
Rinse Hold position: when you choose this option, the machine will not drain the water of the last rinse, so as not to crease the laundry. At the end of the cycle, the door is locked, the Start/Pause button light goes out, the Rinse Hold button light remains lit, to indicate that the water must be drained and a flashing zero will appear on the display (the door locked light is on). To complete the cycle, press Skip Reset button once, so as to cause all the lights to go off, the display will show three flashing dashes. Then press FABRIC button in order to select the desired programme. If you wish to drain or spin press the Skip Reset button until the led of the Spin or Drain position on the programme progress display illuminates. You can change the spin speed by means of Spin button and then depress Start/Pause button. Important! If you accidentally press the Skip Reset button more than once, the display will show three flashing dashes. To drain the water, select any washing programme by means of the FABRICS button, then press Skip Reset three times in order to select the drain (only the Drain light will remain lit), then press again the Start/Pause button.

13. How to cancel a programme during its cycle
To cancel a programme that is being carried out, first pause the washing machine by pressing the Start/Pause button, then press the Skip/Reset button repeatedly, until the display shows three flashing dashes.
14. How to open the door during the cycle of a programme
You can open the door, after having set the washing machine to Pause, provided the following conditions exist: the washing machine is not in the heating phase beyond 55C; the level of the water is not high; the drum is not turning. If these requirements are met, when you pause the washing machine, the door locked light goes off and the door can be opened.
Do NOT overload the machine. Weigh the laundry the first few times you use the appliance. The average weights of the most common items are listed below as a guide: 1000g = 1 kg Sheet Pillow case Tablecloth Serviette Tea towel Linen hand towel Towelling hand towel Towelling bath towel Bath robe Mans shirt Apron 700-1000 g 100-200 g 400-500 g 50-100 g 70-120 g 100-150 g 150-250 g 700-1000 g 1000-1500 g 200-300 g 150-200 g
Load the laundry loosely alternating large items with small ones. Sort the laundry according to the type of fabric, colour-fastness and how dirty it is. Avoid washing unhemmed or torn items as they may unravel. Before washing, empty all pockets of small objects which may have been left inside (coins, keys, screws etc). as these could damage the drain pump. When washing curtains, remove the hooks. Close poppers and zips and fasten loose buttons. It is essential to wash new coloured items separately when washing for the first time. When washing fabrics requiring different wash temperatures together, always select the lowest temperature.
White items should not be washed with coloured items. Very small items (handkerchiefs, ribbons, socks etc) should be washed in a washing bag or a pillow case. Use a good quality detergent suitable for automatic washing machines. Use the correct quantities of detergent. For wool, use gentle detergent only in small quantities. Bleach is very corrosive; it should be used with care and kept out of reach of children. Some stains such as fruit, wine, grass, rust etc. are difficult to remove and should be treated before washing with specific products, which can be found in most household shops. In some cases it may help to soak the stain before washing with a special presoak product or biological detergent. Only wool marked Pure New Wool - washable, preshrunk can be washed in the the wool programme; other types of wool should be washed in Hand Wash programme. If you have used the machine to wash, rinse or spin only non-colour fast garments, there may be dye left in the sump. To ensure any subsequent wash is not contaminated with the dye, select and carry out a rinse and spin programme, without any garments, to ensure that any dye is removed from the sump. Once you have finished using the machine, you are advised to unplug it and turn off the water tap.

Which detergent?.

To ensure you obtain the best wash results from your appliance, it is important to use the right detergent in your everyday wash, and only detergents recommended for use in automatic machines. To maintain the appearance of your clothes and household textiles and to make them last longer you should use different types of detergent for different washes, whether for whites, colours or delicates.

And in which form?

Not only are there different types of detergent, but they are also available in different forms. Whether you chose a powder or liquid in traditional or compact form is your own personal choice.

TRADITIONAL POWDERS

Pour the powder directly into the dispenser drawer. Do not sprinkle powder onto clothes in the machine drum.

WHITES

We recommend the Ariel product range which is biological and designed to provide excellent cleaning and stain removal even at low temperatures.

TRADITIONAL LIQUIDS

Liquid can be placed in the main wash compartment of the detergent drawer marked with the symbol , start the machine immediately upon placing the detergent in the dispenser drawer. Alternatively the detergent is measured into the specially designed dosing device* which should be placed on top of the laundry, and at the back of the machine drum.

NON BIOLOGICAL

If you prefer to use a non biological detergent, which does not contain enzymes we recommend Fairy. Fairy provides good cleaning and stain removal.
COMPACT POWDERS AND LIQUIDS
Compact detergents (or concentrates as they are also known) are available in liquid or powder form, and generally require a smaller dosage. Follow the manufacturers instructions to ensure the most economical usage. Pour the detergent directly into the dispenser drawer, or alternatively measure the detergent into the specially designed dosing device* which should be placed on top of the laundry, and at the back of the machine drum. * If you use a dosing device in a washer dryer, please ensure the dosing device/ball is removed before carrying out a drying programme.

A cross through any symbol means DO NOT fabric conditioner to avoid the conditioner entering the machine prematurely. When using liquid detergent and a prewash programme, place the detergent into the correct compartment in the dispenser drawer, after the prewash has finished. 16

Important Notes

For best results, always use the dispenser drawer for dispensing detergents and liquid additives. Once the dispenser has been filled, close it by pushing it in gently. This is particularly important if you are using

Washing programmes

Type of laundry and symbols on labels
Programme/ Load temperature 6 kg

Description of programme

Consumption* Available options Spin /Rinse Hold Prewash Super Rinse Energy kWh 2.0 Water litres 52 Time h/min. 2.09
White cotton: e.g. sheets, tablecloths, household linen
Cotton daily Main wash at 60 - 95C 60- 95C 3 rinses Long spin Cottons 60 - 95C Main wash at 60 - 95C 3 rinses Long spin
Spin / Rinse Hold Prewash Intensive Extra Quick Super Rinse 40 AA Spin / Rinse Hold Prewash Intensive Extra Quick Super Rinse 40 AA** Spin /Rinse Hold Prewash Super Rinse
Coloured cotton *** : e.g. shirts, blouses, towels, underwear, household linen
Cottons Main wash at 60- 50- 40 - 60- 50 - 4030C 30C 3 rinses Long spin Cotton daily Main wash at 60- 50- 40 - 60-50 - 4030C 30C 3 rinses Long spin Synthetics 60 - - 30C Main wash at 60 - 50 - 40 30C 3 rinses Short spin Main wash at 40 - 30C 3 rinses Short spin
Coloured cotton: e.g. shirts, blouses, towels, underwear,
Synthetic fabrics and blends: e.g. shirts, blouses, underwear
Delicate fabrics: e.g. acrylic fabrics, viscose, polyester, synthetic blends
Spin / Rinse Hold Prewash Intensive Extra Quick Super Rinse 40 AA ** Spin /Rinse Hold Prewash Extra Quick Super Rinse

Delicates 40 - 30C

Wool / Handwash
2 kg Wool/Handwash Main wash at 40 - 30C 40- 30C 3 rinses Short spin

Spin / Rinse Hold

This data is given purely as an indication: the consumption values may vary in relation to the quantity and type of laundry, the temperature of the water supply and the ambient temperature. The data refers to the highest temperature provided for each programme. ** Only at the temperature of 40C or higher. *** The Cottons programme at 60C with the option 40 AA selected is the reference programme for the data entered in the energy label, in compliance with EEC 92/75: Load: 7 kg, Energy: 1.19 kWh, Water: 57 litres, Time: 155 mins. 17

The washing powder and additive dispenser drawer should be cleaned regularly.
Place a container close to the pump to collect any spillage. Pull out the emergency emptying hose, place it in the container and remove its cap.
When no more water comes out, unscrew the pump cover and remove it. Always keep a rag nearby to dry up spillage of water when removing the cover.
It is therefore a good idea to clean it from time to time. Turn off the water tap. Unscrew the water inlet hose. Clean the filter using a hard bristle brush. Tighten up the inlet hose.
Remove any objects from the pump impeller by

rotating it.

The dangers of freezing
If the machine is exposed to temperatures below 0C, certain precautions should be taken. Turn off the water tap. Unscrew the inlet hose. Place the end of the emergency emptying hose and that of the inlet hose in a bowl placed on the floor and let water drain out. Screw the water inlet hose back on and reposition the emergency emptying hose after having put the cap on again. When you intend to start the machine up again, make sure that the room temperature is above 0C.
Put the cap back on the emergency emptying hose and place the latter back in its seat.

Emergency emptying out

Screw the pump cover fully in. Close the pump door.

Warning

When the appliance is in use and depending on the programme selected there can be hot water in the pump. Never remove the pump cover during a wash cycle, always wait until the appliance has finished the cycle, and is empty. When replacing the cover, ensure it is securely retightened so as to stop leaks and young children being able to remove it.
Cleaning the water inlet filter
If your water is very hard or contains traces of lime deposit, the water inlet filter may become clogged.
If the water is not discharged, proceed as follows to empty out the machine: pull out the plug from the power socket; close the water tap; if necessary, wait until the water has cooled down; open the pump door; place a bowl on the floor and place the end of the emergency emptying hose into the bowl. Remove its cap. The water should drain by gravity into the bowl. When the bowl is full, put the cap back on the hose. Empty the bowl. Repeat the procedure until water stops flowing out; clean the pump if necessary as previously described; replace the emergency emptying hose in its seat after having plugged it; screw the pump cover again and close the door.

Something Not Working

Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. Before contacting your local Service Force Centre, please carry out the checks listed below. IMPORTANT: if you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is under guarantee. During machine operation it is possible that one of the following alarm codes appears on the display and at the same time the buzzer sounds: - E10 : problem with the water supply - E20 : problem with water draining - E40 : door open Once the problem has been eliminated, press the Start/Pause button to restart the programme. If after all checks, the problem persists, contact your local Service Force Centre.

Symptom

The machine does not start

Possible causes

The door has not been closed. (E40) The plug is not properly inserted in the power socket. There is no supply at the socket. The main fuse or the fuse in the plug has blown. The Start/Pause button has not been depressed. The Delay option has been selected. The water tap is closed. (E10 ) The filter in the inlet hose is blocked. (E10 ) The inlet hose may be squashed or kinked. (E10 ) The door has not been closed. (E40) The end of the drain hose is too low. The end of the drain hose is submerged in water. There is no vent in the end of the drain hose. The drain hose may be squashed or kinked. (E20) The Rinse Hold option has been selected. The drain pump may be blocked. (E20) The drain hose extension, if fitted, is not correct. Follow the instructions for connecting to the waste. The drainage system pipes are blocked. The wash load is unbalanced: redistribute the clothes inside the drum to allow the machine to spin. Too much detergent or unsuitable detergent has been used (creates too much foam). Check whether there are any leaks from the inlet hose fittings. It is not always easy to see this as the water runs down the hose; check to see if it is damp. The drain hose may be damaged or not securely positioned. The detergent dispenser drawer or recess is clogged. The drainage system pipes are blocked. The cap on the emergency emptying hose has not been replaced or not fully screwed up after cleaning the pump.
The machine does not fill
The machine fills then empties immediately The machine does not empty and/or does not spin
There is water on the floor

The door will not open

The water level is above the bottom edge of the door. The machine is heating the water. The drum is turning. The door can be opened only when the relevant light has gone out.

Exclusions

This guarantee does not cover:
Damage or calls resulting from transportation, improper use or neglect, the replacement of any light bulbs or removable parts of glass or plastic. Costs incurred for calls to put right an appliance which is improperly installed or calls to appliances outside the United Kingdom.
Installation Instructions
It is dangerous to alter the specifications or attempt to modify this product in any way. Care must be taken to ensure that the appliance does not stand on the electrical supply cable. Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person.

Technical Specifications

DIMENSIONS Height Width Depth 85 cm 60 cm 63 cm 230-240 V/50 Hz 2050 W (10A) Minimum Maximum Cotton, linen Synthetics Delicate fabrics Wool/Hand wash MaximumZ 16 S Energy Water Time 0.05 MPa (0.5 bar) 0.80 MPa (8. bar) 7 kg 3 kg 3 kg 2. kg 1200 rpm (ZWF 1237 W) 1400 rpm (ZWF 1437 W) 1.19 kWh 57 litres 155 minutes POWER SUPPLY VOLTAGE TOTAL POWER ABSORBED WATER PRESSURE MAXIMUM RECOMMENDED LOAD
SPIN SPEED CONSUMPTION DATA FOR WASHING 7 KG NORMALLY SOILED COTTON ITEMS AT 60C + 40AA option selected
This appliance complies with the following E.E.C. Directives: - 73/23 EEC of 19.2.73 (Low Voltage Directive) and subsequent modifications; - 89/336 EEC of 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications. 23

Unpacking

All transit bolts and packing must be removed before using the appliance. You are advised to keep all the packaging for re-use in case the machine is to be transported again. Using a spanner unscrew and remove the two rear bottom screws. Slide out the two plastic pins. Lay the machine gently on its back, making sure that the hoses are not squashed.
Fill all the holes with the plastic plugs supplied with the instruction booklet.
Important ! You are advised to keep all the packaging for re-use in case the machine is to be transported again. In case of moving out the same precautions as per paragraphe The dangers of freezing must be taken i.e. the residual water in the hoses must be pumped out.

Positioning

Install the machine on a flat hard floor. Make sure that air circulation around the machine is not impeded by carpets, rugs etc. Check that the machine does not touch the wall or other kitchen units. Never place cardboard, wood or similar materials under the machine to compensate for any unevenness in the floor. Your new washing machine has been designed to be permanently plumbed in to your homes water supply and drainage system. However, if this is not possible, it may be connected to a suitable existing tap with the drain hose discharging into a sink. The appliance has an inlet hose, with female 3/4 BSP thread connector. If this connection is not compatible with the plumbing of the existing installation, a variety of connectors are available from good hardware stores and plumbers merchants to suit most domestic plumbing. Any alteration to your existing plumbing must be carried out by a competent person, or qualified plumber.

Remove the polystyrene block from the bottom of the machine and release the two plastic bags. Very carefully slide out the left polythene bag, removing it towards the right and then downwards.
Repeat the operation for the right polythene bag, removing it towards the left and then upwards.
Installation on a Suspended Floor
Remove the polystyrene base. Set the machine upright and unscrew the remaining rear screw. Slide out the relevant pin.
Suspended wooden floors are particularly susceptible to vibration. To help prevent vibration we recommend you place a waterproof wood panel, at least 15 mm thick under the appliance, secured to at least 2 floor beams with screws. If possible install the appliance in one of the corners of the room, where the floor is more stable.

Water inlet

Connect the hose to a tap with a 3/4 thread. Do not use already employed hoses. Always use the hose supplied with the appliance to connect to the water supply.

U piece supplied

Place the drain hose into your standpipe, which should have an internal diameter of approximately 38mm thus ensuring there is an air break between the drain hose and standpipe.
Installation should comply with local water authority and building regulations requirements. The appliance must be connected to a cold water supply. A minimum water pressure of 0.05 MPa (0.5 bar) is required for safe operation of the appliance. If you cannot make the cold water connection direct from the rising mains, you may be able to operate the appliance from your cold water storage system. There should be a minimum distance of 5.02m (16.5 ft) between the appliances inlet and the bottom of the water storage tank. Set the hose correctly by loosening the ring nut. After positioning the inlet hose, be sure to tighten the ring nut again to prevent leaks.
38 mm (11.2) standpipe diameter
When discharging into a standpipe ensure that the top of the standpipe is no more than 90cm (35.4'') and no less than 60cm (23.6'') above floor level.

Water drainage

This appliance is designed to be permanently plumbed into your home's drainage system using one of the following methods. 1. Into a drainage standpipe. Firstly form a hook in the end of the drain hose using the U piece supplied.

The drain hose may be extended to a maximum of 4 metres. An additional drain hose and joining piece is available from your local Service Force Centre. The joining piece must have an internal diameter of 18mm. If your drain hose looks like this (see below) you do not require the U piece. Just push the hose firmly into the standpipe.

Min. 60 cm (23.6)

Max. 90 cm (35.4)

30 cm (12")

2. Onto a sink outlet spigot. If the outlet spigot has not been used before, remove any blanking plug that may be in place.
Push the drain hose onto the spigot and secure with a clip if required, ensure a loop is formed in the drain hose (see diagram) to prevent waste from the sink entering the washing machine.
Any necessary adjustment can be made with a spanner. Accurate levelling prevents vibration, noise and displacement of the machine during operation. Some vibration is inevitable, especially if mounted on a wooden floor. Sprung wooden floors are particularly susceptible to vibration. For advice, consult a builder. If possible, always place the machine on a solid floor.

Special conditions

If the floor is carpeted or covered with crumbly or soft material, insert a rigid support base under the feet to prevent noise, vibration or displacement. The base should protrude a few centimetres beyond the edges of the machine. Warning The machine should NOT be placed on deep pile carpeting. Note Please ensure that when the appliance is installed it is easily accessible for the engineer in the event of a breakdown.
The drain hose may be extended to a maximum of 4 metres. An additional drain hose and joining piece is available from your local Service Force Centre. The joining piece must have an internal diameter of 18mm.
Before connecting the machine to new pipework or to pipework that has not been used for some time, run off a reasonable amount of water to flush out any debris that may have collected in the pipes.
Washing machines and dishwashers should be connected to the FOUL drainage system, the water will then be taken to a sewage works for treatment before being discharged safely into a river. It is essential that these appliances are not connected to the surface water drainage system as this water is discharged directly into a river or stream and may cause pollution.

Levelling

Level the washing machine by raising or lowering the feet. The feet may be tight to adjust as they incorporate a self locking nut, but the machine MUST be level and stable (check diagonally).
If you require any further advice please contact your local water authority.
Should the plug need to be replaced for any reason, proceed as described below. The wires in the mains lead are coloured in accordance with the following code: Green and Yellow - Earth Blue - Neutral Brown - Live

GREEN & YELLOW

SHOWER SINK BATH TOILET BIDET
WASHING MACHINE RAINWATER 'RUN-OFF'

DISHWASHER

BROWN BLUE

CORD CLAMP

FOUL DRAIN SURFACE WATER DRAINS & SEWERS FOUL SEWERS SEWAGE TREATMENT WORKS TREATED DISCHARGE RIVER RIVER

UNTREATED DISCHARGE

Electrical connection
Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. WARNING: THIS APPLIANCE MUST BE EARTHED. The manufacturer declines any liability should this safety measure not be observed. Before switching on, make sure the electricity supply voltage is the same as that indicated on the appliances rating plate. The rating plate is located at the top of the rim of the open door.
The wire coloured green and yellow must be connected to the terminal marked with the letter E or by the earth symbol or coloured green and yellow. The wire coloured blue must be connected to the terminal marked N or coloured black. The wire coloured brown must be connected to the terminal marked L or coloured red. Upon completion there must be no cut, or stray strands of wire present and the cord clamp must be secure over the outer sheath. WARNING: A cut off plug inserted into a 13 amp socket is a serious safety (shock) hazard. Ensure that the cut off plug is disposed of safely. Should the appliance power supply cable neeed to be replaced, this must be carried out by our Service Force Centre. Note When the appliance is installed the power supply cable must be accessible.

Permanent connection

In the case of permanent connection it is necessary that you install a double pole switch between the appliance and the electricity supply (mains), with a minimum gap of 3mm between the switch contacts and of a type suitable for the required load in compliance with the current electrical regulations. The switch must not break the yellow and green earth cable at any point.
The appliance is supplied with a 13amp plug fitted. In the event of having to change the fuse in the plug supplied, a 13amp ASTA approved (BS1363/A) fuse must be used. 27
From the Electrolux Group. The worlds No. 1 choice.
The Electrolux Group is the world's largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx. USD 14 billion in more than 150 countries around the world.