ADSL Internet Access Device Prestige 650

Compact Guide

E n g l i s h Ve r s i o n
Corporate Headquarters ZyXEL Communications Co. Tel: +886-3-578-3942 Fax: +886-3-578-2439 Email: sales@zyxel.com.tw http://www.zyxel.com http://www.zyxel.com.tw Norway ZyXEL Communications A/S Tel: +80 Fax: +81 Email: sales@zyxel.no http://www.zyxel.no
North America ZyXEL Communications Inc. Tel: +1-714-632-0882 Fax: +1-714-632-0858 Email: sales@zyxel.com http://www.zyxel.com
Germany ZyXEL Deutschland GmbH. Tel: +Fax: +Email: sales@zyxel.de http://www.zyxel.de
Denmark ZyXEL Communications A/S Tel: +00 Fax: +07 Email: sales@zyxel.dk http://www.zyxel.dk
Support Model P650H Series P650HW Series
Sweden ZyXEL Communications A/S Tel: +00 Fax: +01 Email: sales@zyxel.se http://www.zyxel.se
Finland ZyXEL Communications Oy Tel: +358-9-Fax: +358-9-Email: sales@zyxel.fi

65-020-650024

Prestige 650H/HW

Table of Contents

1 Introducing the Prestige.... Hardware..... 3 2.1 Rear Panel Connections... 3 2.2 Inserting a PCMCIA Wireless LAN Card... 4 2.3 The Front Panel LEDs.... Setting Up Your Computers IP Address... 6 3.1 Windows 2000/NT/XP.... 6 3.2 Checking/Updating Your Computers IP Address... 7 3.3 Testing the Connection to the Prestige... Configuring Your Prestige... 8 4.1 Accessing Your Prestige Via Web Configurator... 8 4.2 Common Screen Command Buttons.... 10 4.3 Internet Access Using the Wizard... 10 4.4 Test Your Internet Connection... Advanced Configuration.... 15 5.1 Wireless LAN Setup.... 15 5.2 Wireless LAN Security Setup.... 17 5.3 Network Address Translation Overview... 18 5.4 Configuring SUA Server.... 18 5.5 UPnP Overview.... 20 5.6 Configuring UPnP.... Troubleshooting..... 21
1 Introducing the Prestige
The Prestige 650H/HW ADSL router is the ideal all-in-one device for small networks connecting to the Internet via ADSL. Key features of the Prestige include wireless LAN, NAT, Remote Management and UPnP. See your Users Guide for more details on all Prestige features. You should have an Internet account already set up and have been given most of the following information.
INTERNET ACCOUNT INFORMATION Your devices WAN IP Address (if given): __________________ DNS Server IP Address (if given): Primary __________________, Secondary _________________ Virtual Path Identifier (VPI): ____________ Virtual Channel Identifier (VCI): ____________
INTERNET ACCOUNT INFORMATION Multiplexing (VC-based or LLC-based): Encapsulation: RFC 1483 ENET ENCAP PPPoA PPPoE Ethernet Encapsulation Gateway IP Address: ____________________ User Name: ____________ Service Name: ____________ User Name: ____________ Password: ____________ Password: ____________ VC LLC

2 Hardware

2.1 Rear Panel Connections
Figure 1 Prestige Hardware Connections 3
Table 1 Prestige Rear Panel Description
LABEL 1. 2. 3. DSL LAN 1.4 POWER DESCRIPTION Connect to a telephone jack using the included phone wire. Connect to a computer/external hub using an Ethernet cable. Connect to a power source using the power adapter for your region (see your Users Guide).
After youve made the connections, connect the power cable to a power supply and push in the power button to turn on the Prestige. The PWR LED turns on. The SYS LED blinks while performing system testing and then turns steady on if the testing is successful. A LAN LED turns on if a LAN port is properly connected. CONSOLE RESET Connect to a serial port (COM port) on your computer using the RS-232 end (the big end) of the console cable (optional part). Connect the other end to the Prestige CONSOLE port. You only need to use this button if youve forgotten the Prestiges password. It returns the Prestige to the factory defaults (password is 1234, LAN IP address 192.168.1.1 etc.; see your Users Guide for details).
2.2 Inserting a PCMCIA Wireless LAN Card
To add optional wireless LAN capabilities, you need a ZyAIR series wireless LAN PCMCIA card. Step 1. Step 2. Locate the slot labeled Wireless LAN on the Prestige. With its pin connector facing the slot and the LED side facing upwards, slide the ZyAIR wireless LAN card into the slot. Never force, bend or twist the wireless LAN card into the slot. Step 3. Restart the Prestige. The WLAN LED should turn on.

2.3 The Front Panel LEDs

Figure 2 Prestige Front Panel 4
Prestige 650H/HW Refer to the following table for more detailed LED descriptions. Table 2 Front Panel LED Description
LED PWR COLOR Green STATUS On Off SYS Green On Blinking Off Red PPPoE Green On On Off LAN 1-4 Green On Blinking Off Orange On Blinking Off WLAN Green On Off Blinking DSL Green On Blinking Off ACT Green Blinking Off DESCRIPTION The Prestige is receiving power. The Prestige is not receiving power. The Prestige is functioning properly. The Prestige is rebooting. The system is not ready or has malfunctioned. Power to the Prestige is too low. The connection to the PPPoE server is up. There is no connection to the PPPoE server. The Prestige has a successful 10Mb Ethernet connection. The Prestige is sending/receiving data. The Prestige does not have 10Mb Ethernet connection. The Prestige has a successful 100Mb Ethernet connection. The Prestige is sending/receiving data. The Prestige does not have 100Mb Ethernet connection. Wireless link is ready. Wireless link is not ready or has failed. The Prestige is sending/receiving data through the WLAN. The Prestige is linked successfully to a DSLAM. The Prestige is initializing the DSL line. The DSL link is down. The Prestige is sending/receiving data. The system is ready, but is not sending/receiving data.
3 Setting Up Your Computers IP Address
Skip this section if your computer is already set up to accept a dynamic IP address. This is the default for most new computers. The Prestige is already set up to assign your computer an IP address. Use this section to set up your computer to receive an IP address or assign it a static IP address in the 192.168.1.2 to 192.168.1.254 range with a subnet mask of 255.255.255.0. This is necessary to ensure that your computer can communicate with your Prestige. Your computer must have an Ethernet card and TCP/IP installed. TCP/IP should already be installed on computers using Windows NT/2000/XP, Macintosh OS 7 and later operating systems.

3.1 Windows 2000/NT/XP

1. 2. In Windows XP, click start, Control Panel. In Windows 2000/NT, click Start, Settings, Control Panel. In Windows XP, click Network Connections. In Windows 2000/NT, click Network and Dial-up Connections. 3. 4. 5. Right-click Local Area Connection and then click Properties. Select Internet Protocol (TCP/IP) (under the General tab in Win XP) and click Properties. The Internet Protocol TCP/IP Properties screen opens (the General tab in Windows XP). - To have your computer assigned a dynamic IP address, click Obtain an IP address automatically. If you know your DNS sever IP address(es), type them in the Preferred DNS server and/or Alternate DNS server fields. -To configure a static IP address, click Use the following IP Address and fill in the IP address (choose one from192.168.1.2 to 192.168.1.254), Subnet mask (255.255.255.0), and Default gateway (192.168.1.1) fields. Then enter your DNS server IP address(es) in the Preferred DNS server and/or Alternate DNS server fields. If you have more than two DNS servers, click Advanced, the DNS tab and then configure them using Add.

6. Click Advanced. Remove any previously installed gateways in the IP Settings tab and click OK to go back to the Internet Protocol TCP/IP Properties screen.
Click OK to close the Internet Protocol (TCP/IP) Properties window. Click OK to close the Local Area Connection Properties window.
3.2 Checking/Updating Your Computers IP Address
1. 2. In the computer, click Start, (All) Programs, Accessories and then Command Prompt. In the Command Prompt window, type "ipconfig" and then press ENTER to verify that your computers IP address is in the correct range (192.168.1.2 to 192.168.1.254) with subnet mask 255.255.255.0. This is necessary in order to communicate with the Prestige.
Refer to your Users Guide for detailed IP address configuration for other Windows and Macintosh computer operating systems.
3.3 Testing the Connection to the Prestige
1. 2. Click Start, (All) Programs, Accessories and then Command Prompt. In the Command Prompt window, type "ping followed by a space and the IP address of the Prestige (192.168.1.1 is the default).
3. Press ENTER and the following screen displays.
C:\>ping 192.168.1.1 Pinging 192.168.1.1 with 32 bytes of data: Reply Reply Reply Reply from from from from 192.168.1.1: 192.168.1.1: 192.168.1.1: 192.168.1.1: bytes=32 bytes=32 bytes=32 bytes=32 time=10ms time<10ms time<10ms time<10ms TTL=254 TTL=254 TTL=254 TTL=254
Ping statistics for 192.168.1.1: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 10ms, Average = 2ms
Your computer can now communicate with the Prestige using the LAN port.
4 Configuring Your Prestige
This Compact Guide shows you how to use the web configurator only. See your Users Guide for background information on all Prestige features and SMT (System Management Terminal) configuration.
4.1 Accessing Your Prestige Via Web Configurator
Step 1. Launch your web browser. Enter 192.168.1.1 as the web site address.

Web site address.

Figure 3 Entering Prestige LAN IP Address in Internet Explorer Step 2. An Enter Network Password window displays. Enter the user name (admin is the default), password (1234 is the default) and click OK.

Default user name.

Figure 4 Web Configurator: Password Screen Step 3. You should now see the web configurator Site Map screen. Click Wizard Setup to begin a series of screens to configure your Prestige for the first time. Click a link under Advanced Setup to configure advanced Prestige features. Click a link under Maintenance to see Prestige performance statistics, upload firmware and back up, restore or upload a configuration file. Click Logout in the navigation panel when you have finished a Prestige management session.

WIZARD

Navigation panel

LOGOUT

Figure 5 Web Configurator: Site Map Screen
Prestige 650H/HW The Prestige automatically logs you out if it is left idle for five minutes; press ENTER to log back in again.
4.2 Common Screen Command Buttons
The following table shows common command buttons found on many web configurator screens.
Apply Reset/Cancel Click Apply to save your changes back to the Prestige. Click Reset or Cancel to begin configuring this screen afresh.
4.3 Internet Access Using the Wizard
Use the Wizard Setup screens to configure your system for Internet access settings and fill in the fields with the information in the Internet Account Information table. Your ISP may have already configured some of the fields in the wizard screens for you. Step 1. In the Site Map screen click Wizard Setup to display the first wizard screen.
From the Mode drop-down list box, select Routing (default) if your ISP allows multiple computers to share an Internet account. Otherwise select Bridge. Select the encapsulation type your ISP uses from the Encapsulation drop-down list box. Choices vary depending on what you select in the Mode field. Select the multiplexing method used by your ISP from the Multiplex drop-down list box. Enter the correct Virtual Path Identifier (VPI) and Virtual Channel Identifier (VCI) numbers supplied by your ISP in the VPI and VCI fields. These fields may already be configured. Click Next.
Figure 6 Wizard Screen 1 Step 2. The second wizard screen varies depending on what mode and encapsulation type you use. All screens shown are with routing mode. Configure the fields and click Next to continue.
If your ISP provides the name of your PPPoE service provider, enter it in the Service Name field. Enter the user name and password exactly as your ISP assigned them. Select Obtain an IP Address Automatically if you have a dynamic IP address; otherwise select Static IP Address and type your ISP assigned IP address in the text box below. Select Connect on Demand when you don't want the connection up all the time and specify an idle time-out period (in seconds) in the Max. Idle Timeout field. Select Nailed-Up Connection when you want your connection up all the time. The Prestige will try to bring up the connection automatically if it is disconnected.
Figure 7 Internet Connection with PPPoE
From the Network Address Translation drop-down list box, select SUA Only, Full Feature or None. Refer to the Network Address Translation section for more information. Enter the IP address given by your ISP in the IP Address field.
The IP Address field is not available for bridge mode.
Refer to Figure 7 for description of the Network Address Translation field.
Figure 8 Internet Connection with RFC 1483

In the ENET ENCAP Gateway field, enter the gateway IP address given by your ISP. Refer to Figure 7 for other field descriptions.
Figure 9 Internet Connection with ENET ENCAP
Refer to Figure 7 for field descriptions.
The IP Address and Network Address Translation fields are not available for bridge mode.
Figure 10 Internet Connection with PPPoA Step 3. Verify the settings in the screen shown next. To change the LAN information on the Prestige, click Change LAN Configurations. Otherwise click Save Settings to save the configuration and skip to step 5.
Figure 11 Wizard Screen 3 Step 4. If you want to change your Prestige LAN settings, click Change LAN Configuration to display the screen as shown next.
Enter the IP address of your Prestige in dotted decimal notation in the LAN IP Address field. For example, 192.168.1.1 (factory default).
If you change the Prestiges LAN IP address, you must use the new IP address if you want to access the web configurator again.
Enter a subnet mask in dotted decimal notation in the LAN Subnet Mask field. From the DHCP Server drop-down list box, select On to allow your Prestige to assign IP addresses, an IP default gateway and DNS servers to computer systems that support the DHCP client. Select Off to disable DHCP server. When DHCP server is used, set the following items:
Figure 12 Wizard: LAN Configuration
Specify the first of the contiguous addresses in the IP address pool in the Client IP Pool Starting Address field. Specify the size or count of the IP address pool in the Size of Client IP Pool field. Enter the IP address(es) of the DNS server(s) in the Primary DNS Server and/or Secondary DNS Server fields.

Step 5.

The Prestige automatically tests the connection to the computer(s) connected to the LAN ports. To test the connection from the Prestige to the ISP, click Start Diagnose. Otherwise click Return to Main Menu to go back to the Site Map screen.
Figure 13 Wizard Screen 4
4.4 Test Your Internet Connection
Launch your web browser and navigate to www.zyxel.com. Internet access is just the beginning. Refer to the Users Guide for more detailed information on the complete range of Prestige features. If you cannot access the Internet, open the web configurator again to confirm that the Internet settings you configured in the Wizard Setup are correct.

5 Advanced Configuration

This section shows how to configure some of the advanced features of the Prestige.

5.1 Wireless LAN Setup

A wireless LAN (WLAN) provides a flexible data communications system that you can use to access various services (the Internet, email, printer services, etc.) on the wired network without additional expensive network cabling infrastructure. In effect, a wireless LAN environment provides you the freedom to stay connected to the wired network while moving in the coverage area. To configure wireless settings, click Advanced Setup in the navigation panel, Wireless and then click the Wireless link.
Figure 14 Wireless LAN: Wireless 15
Prestige 650H/HW The following table describes the fields in this screen. Table 3 Wireless LAN: Wireless
LABEL ESSID DESCRIPTION (Extended Service Set IDentity) The ESSID is a unique name to identify the Prestige in the wireless LAN. Wireless clients associating to an Access Point (the Prestige) must have the same ESSID. Enter a descriptive name (up to 32 printable 7-bit ASCII characters). Select Yes to hide the ESSID so a wireless client cannot obtain the ESSID through passive scanning. Select No to make the ESSID visible so a wireless client can obtain the ESSID through passive scanning. The range of radio frequencies used by IEEE 802.11b wireless devices is called a channel. Set the operating frequency/channel depending on your particular region. Select a channel from the drop-down list box. Adjacent APs with overlapping coverage areas should use different channels to reduce crosstalk. Crosstalk occurs when the radio signals from access points overlap and interfere with one another degrading performance. RTS/CTS Threshold Select this option to enable the RTS (Request To Send)/CTS (Clear To Send) threshold to minimize collisions. Enter a value between 0 and 2432. The default is 2432. Request To Send is the threshold (number of bytes) for enabling the RTS/CTS handshake. Data with its frame size larger than this value will perform the RTS/CTS handshake. Setting this attribute to be larger than the maximum MSDU (MAC Service Data Unit) size turns off the RTS/CTS handshake. Fragmentation Threshold WEP Encryption Fragmentation Threshold is the maximum data fragment size that can be sent. WEP (Wired Equivalent Privacy) encrypts data frames before transmitting them over the wireless network. Select Disable allows all wireless computers to communicate with the access points without any data encryption. Select 64-bit WEP or 128-bit WEP and then configure the keys in the fields provided to activate data encryption. Key 1 to Key 4 The WEP keys are used to encrypt data. Both the Prestige and the wireless clients must use the same WEP key for data transmission. If you chose 64-bit WEP, then enter any 5 characters (ASCII string) or 10 hexadecimal characters ("0-9", "A-F"). If you chose 128-bit WEP, then enter 13 characters (ASCII string) or 26 hexadecimal characters ("0-9", "A-F"). Select only one key to be activated at any one time.

Hide ESSID

Channel ID
Prestige 650H/HW The wireless clients and Prestige must use the same ESSID, channel ID and WEP encryption key (if WEP is enabled) for wireless communication.
5.2 Wireless LAN Security Setup
For added security, set your Prestige to check the MAC address of the wireless client device against a list of allowed or denied MAC addresses. To set up the MAC address list for wireless LAN, click Advanced Setup in the navigation panel, Wireless and then click the MAC Filter link.
Figure 15 Wireless LAN: MAC Address Filter The following table describes the fields in this screen. Table 4 Wireless LAN: MAC Address Filter
FIELD Active DESCRIPTION Select Yes from the drop down list box to enable MAC address filtering.
Prestige 650H/HW Table 4 Wireless LAN: MAC Address Filter
FIELD DESCRIPTION Define the filter action for the list of MAC addresses in the MAC Address table. Action Select Deny Association to block access to the router, MAC addresses not listed will be allowed to access the router Select Allow Association to permit access to the router, MAC addresses not listed will be denied access to the router. MAC Address Enter the list of MAC addresses in this table.
5.3 Network Address Translation Overview
NAT (Network Address Translation - NAT, RFC 1631) is the translation of the IP address of a host in a packet. For example, the source address of an outgoing packet, used within one network is changed to a different IP address known within another network. If you have a single public IP address then select SUA Only in the NAT-Mode screen (see Figure 16). If you have multiple public IP addresses then you may use full feature mapping types (see the Users Guide for more details). NAT supports five types of IP/port mapping. They are: 1. 2. 3. 4. 5. One-to-One: One-to-one mode maps one local IP address to one global IP address. Note that port numbers do not change for One-to-one NAT mapping type. Many-to-One: Many-to-One mode maps multiple local IP addresses to one global IP address. Many-to-Many Overload: Many-to-Many Overload mode maps multiple local IP addresses to shared global IP addresses. Many-to-Many No Overload: Many-to-Many No Overload mode maps each local IP address to unique global IP addresses. Server: This type allows you to specify inside servers of different services behind the NAT to be accessible to the outside world.
5.4 Configuring SUA Server
An SUA server set is a list of inside (behind NAT on the LAN) servers, for example, web or FTP, that you can make visible to the outside world even though SUA makes your whole inside network appear as a single computer to the outside world. 18
Prestige 650H/HW Step 1. From the main screen click Advanced Setup and then NAT to open the NAT-Mode screen. Select SUA Only.

Figure 16 NAT: Mode Step 2. Click Edit Details.
Figure 17 SUA/NAT Server The following table describes the fields in this screen.
Prestige 650H/HW Table 5 SUA/NAT Server
LABEL Start Port No. End Port No. IP Address DESCRIPTION Type a port number in this field. To forward only one port, type the port number again in the End Port field. To forward a series of ports, type the start port number here and the end port number in the End Port field. Type a port number in this field. To forward only one port, type the port number in the Start Port field above and then type it again in this field. To forward a series of ports, type the last port number in a series that begins with the port number in the Start Port field above. Enter the inside IP address of the server here.

5.5 UPnP Overview

Universal Plug and Play (UPnP) is a distributed, open networking standard that uses TCP/IP for simple peer-to-peer network connectivity between devices. A UPnP device can dynamically join a network, obtain an IP address, convey its capabilities and learn about other devices on the network. In turn, a device can leave a network smoothly and automatically when it is no longer in use. All UPnP-enabled devices may communicate freely with each other without additional configuration. Disable UPnP if this is not your intention. Windows ME and Windows XP support UPnP. See the Microsoft website for information about other Microsoft operating systems. Make sure you apply Microsofts UPnP security patch before enabling the UPnP feature. Refer to the Microsoft website.

5.6 Configuring UPnP

Click Advanced Setup and then UPnP to open the UPnP screen.
Figure 18 UPnP The following table describes the fields in this screen. 20
Prestige 650H/HW Table 6 UPnP
FIELD Enable the Universal Plug and Play (UPnP) Service DESCRIPTION Select this checkbox to activate UPnP. Be aware that anyone could use a UPnP application to open the web configurator's login screen without entering the Prestige's IP address (although you must still enter the password to access the web configurator). Select this check box to allow UPnP-enabled applications to automatically configure the Prestige so that they can communicate through the Prestige, for example by using NAT Traversal, UPnP applications automatically reserve a NAT forwarding port in order to communicate with another UPnP enabled device; this eliminates the need to manually configure port forwarding for the UPnP enabled application.

Allow users to make configuration changes through UPnP

6 Troubleshooting

Table 7 Troubleshooting

PROBLEM

None of the LEDs turn on when you turn on the Prestige.

CORRECTIVE ACTION

Make sure that you have the correct power adapter connected to the Prestige and plugged in to an appropriate power source. Check all cable connections. If the LEDs still do not turn on, you may have a hardware problem. In this case, you should contact your local vendor. Check the cable connection between the Prestige and your computer or hub. Refer to the Rear Panel Connections section for details. Ping the Prestige from a LAN computer. Make sure your computer Ethernet adapter is installed and functioning properly.
Cannot access the Prestige from the LAN.
Cannot ping any computer on the LAN.
If the LAN LEDs are all off, check the cable connections between the Prestige and your LAN computers. Verify that the IP address, subnet mask of the Prestige and the LAN computers are in the same IP address range.
Cannot ping any computer on the WLAN
Make sure the wireless card is properly inserted in the Prestige and the WLAN LED is on. Make sure the wireless card on the wireless client is working properly. Check that both the Prestige and wireless client(s) are using the same ESSID, channel and WEP keys (if WEP encryption is activated).
Prestige 650H/HW Table 7 Troubleshooting
Cannot get a WAN IP address from the ISP. The WAN IP is provided after the ISP verifies the MAC address, host name or user ID. Find out the verification method used by your ISP and configure the corresponding fields. If the ISP checks the user ID, check your service type, user name, and password in the WAN screen. Cannot access the Internet. Verify the Internet connection settings in the WAN screen. Make sure you entered the correct user name and password. For wireless clients, check that both the Prestige and wireless client(s) are using the same ESSID, channel and WEP keys (if WEP encryption is activated).

List of Tables

Table 2-1 Front Panel LED Description....2-1 Table 2-2 Main Menu Commands....2-10 Table 2-3 Main Menu Summary....2-11 Table 2-4 General Setup Menu Fields....2-14 Table 2-5 Configure Dynamic DNS Menu Fields....2-15 Table 3-1 IP Alias Setup Menu Fields....3-7 Table 3-2 DHCP Ethernet Setup Menu Fields...3-9 Table 3-3 TCP/IP Ethernet Setup Menu Fields...3-10 Table 3-4 Wireless LAN Setup Field Description....3-13 Table 3-5 MAC Address Filter Field Description....3-15 Table 3-6 Internet Account Information....3-18 Table 3-7 Internet Access Setup Menu Fields....3-21 Table 4-1 Remote Node Profile Menu Fields....4-4 Table 4-2 Remote Node Network Layer Options...4-7 Table 5-1 TCP/IP-Related Fields in Menu 11.1 Remote Node Profile..5-3 Table 5-2 TCP/IP Remote Node Configuration....5-4 Table 5-3 Edit IP Static Route Menu Fields....5-7 Table 6-1 Remote Node Bridge Options....6-2 Table 6-2 Edit Bridge Static Route Menu Fields....6-3 Table 7-1 NAT Definitions....7-1 Table 7-2 NAT Mapping Types....7-5 Table 7-3 Applying NAT in Menus 4 & 11.3...7-7 Table 7-4 SUA Address Mapping Rules...7-10 Table 7-5 Fields in Menu 15.1.1....7-12 Table 7-6 Menu 15.1.1.1 Editing/Configuring an Individual Rule in a Set..7-13 Table 7-7 Services & Port Numbers....7-15 Table 8-1 Abbreviations Used in the Filter Rules Summary Menu...8-8 Table 8-2 Rule Abbreviations Used....8-8 Table 8-3 TCP/IP Filter Rule Menu Fields....8-10 Table 8-4 Generic Filter Rule Menu Fields...8-15 Table 8-5 Filter Sets Table....8-20 Table 9-1 SNMP Configuration Menu Fields....9-3 Table 9-2 SNMP Traps....9-4 Table 9-3 Ports and Permanent Virtual Circuits....9-4 Table 10-1 System Maintenance Status Menu Fields...10-2 Table 10-2 Fields in System Maintenance....10-4 Table 10-3 System Maintenance Menu Syslog Parameters...10-6 Table 10-4 System Maintenance Menu Diagnostic....10-8 Table 11-1 Filename Conventions....11-2
Prestige 650HW ADSL Router Users Guide Table 11-2 General Commands for Third Party FTP Clients..11-4 Table 11-3 General Commands for Third Party TFTP Clients...11-5 Table 12-1 Budget Management.... 12-3 Table 12-2 Time and Date Setting Fields.... 12-5 Table 13-1 IP Routing Policy Setup.... 13-3 Table 13-2 IP Routing Policy.... 13-4 Table 14-1 Schedule Set Setup Fields.... 14-2 Table 15-1 Menu 24.11 Remote Management Control... 15-2 Table 16-1 Troubleshooting the Start-Up of Your Prestige... 16-1 Table 16-2 Troubleshooting the LAN Interface... 16-1 Table 16-3 Troubleshooting the WAN Interface... 16-2 Table 16-4 Troubleshooting Internet Access... 16-2 Table 16-5 Troubleshooting the Password.... 16-3 Table 16-6 Troubleshooting Telnet.... 16-3

Preface

There are two Prestige 650HW models, one for ADSL over POTS (Plain Old Telephone System) and one for ADSL over ISDN (Integrated Synchronous Digital System). Both models are discussed together in this guide. The Prestige 650HW ADSL router is the ideal all-in-one device for small networks connecting to the Internet via ADSL. You dont need to buy an external hub. The Prestige is equipped with four auto-sensing 10/100BASE-T Ethernet ports to connect to your network and an RJ-11 port (POTS) or RJ-45 port (ISDN) to connect to your ADSL service. The Prestige's 10/100M auto-negotiating LAN interface enables fast data transfer of either 10Mbps or 100Mbps in either half-duplex or full-duplex mode depending on your Ethernet network using either a crossover or straight-through Ethernet cable. The Prestige comes with a PCMCIA wireless card slot for an optional 802.11b wireless card that provides wireless LAN connection without the expensive network cabling infrastructure. The Prestige 650HW is interoperable with all major DSLAM solutions vendors. The Prestige can run maximum upstream transmission rates of up to 832Kbps and maximum downstream transmission rates of 8Mbps. The actual rate depends on the copper category of your telephone wire, distance from the central office and the type of ADSL service subscribed to. See the What is DSL section for more background information on DSL and ADSL In addition, the Prestige 650HW has bridging and IP routing to support a wide range of applications for high-speed Internet access. Your Prestige is easy to install and configure. All functions are configurable via the SMT (System Management Terminal) and web configurator. Advanced users may configure the Prestige using CLI (Command Line Interface) commands. Dont forget to register your Prestige (fast, easy online registration at www.zyxel.com) for free future product updates and information. About This User's Guide This user's guide covers all aspects of Prestige operations and shows you how to get the best out of the multiple advanced features of your ADSL Router using the SMT. It is designed to guide you through the correct configuration of your Prestige 650H for various applications. Related Documentation Supporting Disk More detailed information and examples can be found in our included disk (as well as on the zyxel.com web site). This disk contains information on configuring your Prestige for Internet xvi Preface
Prestige 650HW ADSL Router Users Guide Access, general and advanced FAQs, Application Notes, Troubleshooting, a reference for CI Commands and bundled software. Read Me First Our Read Me First is designed to help you get up and running right away. It contains a detailed easy-to-follow connection diagram, default settings, handy checklists and information on setting up your network and configuring for Internet access. ZyXEL Web Site The ZyXEL download library at www.zyxel.com contains additional support documentation. Please also refer to www.zyxel.com for an online glossary of networking terms. Syntax Conventions Type means for you to type one or more characters and press the carriage return. Select or Choose means for you to select one predefined choices. The SMT menu titles and labels are in Bold Times New Roman font. Predefined field choices are in Bold Arial font. Command and arrow keys are enclosed in square brackets. [ENTER] means the Enter, or carriage return key; [ESC] means the Escape key and [SPACE BAR] means the Space Bar. For brevitys sake, we will use e.g., as a shorthand for for instance, and i.e., for that is or in other words throughout this manual. The Prestige 650HW may be referred to as the P650HW or the Prestige in this users guide. These names refer to both Prestige 650HW models (ADSL over POTS and ADSL over ISDN) unless specifically identified. The following section offers some background information on DSL. Skip to Chapter 1 if you wish to begin working with your router right away.

Diagnostics Capabilities The Prestige can perform self-diagnostic tests. These tests check the integrity of the following circuitry: FLASH memory ADSL circuitry RAM LAN port
Filters The Prestige's packet filtering functions allows added network security and management. Ease of Installation Your Prestige is designed for quick, intuitive and easy installation.
Prestige 650HW ADSL Router Users Guide Housing Your Prestige's all new compact and ventilated housing minimizes space requirements making it easy to position anywhere in your busy office.
Applications for the Prestige

1.3.1 Internet Access

The Prestige is the ideal high-speed Internet access solution. Your Prestige supports the TCP/IP protocol, which the Internet uses exclusively. It is compatible with all major ADSL DSLAM (Digital Subscriber Line Access Multiplexer) providers. A DSLAM is a rack of ADSL line cards with data multiplexed into a backbone network interface/connection (for example, T1, OC3, DS3, ATM or Frame Relay). Think of it as the equivalent of a modem rack for ADSL. In addition, you can insert an optional wireless PCMICA card into the Prestige and allow wireless clients access to your LAN resources. A typical Internet Access application is shown below.
Figure 1-1 Internet Access Application
Prestige 650HW ADSL Router Users Guide Internet Single User Account For a SOHO (Small Office/Home Office) environment, your Prestige offers the Single User Account (SUA) feature that allows multiple users on the LAN (Local Area Network) to access the Internet concurrently for the cost of a single IP address.
1.3.2 LAN to LAN Application
You can use the Prestige to connect two geographically dispersed networks over the ADSL line. A typical LAN-to-LAN application for your Prestige is shown as follows.
Figure 1-2 LAN-to-LAN Application
Chapter 2 Hardware Installation and Initial Setup
This chapter describes the physical features of the Prestige and how to make cable connections.
Front Panel LEDs of the PP650H
The LEDs on the front panel indicate the operational status of your Prestige
Figure 2-1 Prestige Front Panel Table 2-1 Front Panel LED Description

LED PWR COLOR Green STATUS On Blinking Off SYS Green On Blinking Off PPPoE Green On Off LAN 1-4 Green On DESCRIPTION The Prestige is receiving power. The Prestige is performing a self-test. The Prestige is not receiving power. The Prestige is functioning properly. The Prestige is rebooting. The system is not ready or has malfunctioned. The connection to the PPPoE server is up. There is no connection to the PPPoE server. The Prestige has a successful 10Mb Ethernet connection.
Hardware Installation and Initial Setup
Prestige 650HW ADSL Router Users Guide Table 2-1 Front Panel LED Description
LED COLOR STATUS Blinking Off Amber On Blinking Off WLAN Green On Off Blinking DSL Green On Blinking Off ACT Green Blinking Off DESCRIPTION The Prestige is sending/receiving data. The Prestige does not have 10Mb Ethernet connection. The Prestige has a successful 100Mb Ethernet connection. The Prestige is sending/receiving data. The Prestige does not have 100Mb Ethernet connection. The Prestige has successful connection to a WLAN. WLAN link is not ready or has failed. The Prestige is sending/receiving data through the WLAN. The Prestige is linked successfully to a DSLAM. The Prestige is initializing the DSL line. The DSL link is down. The Prestige is sending/receiving data. The system is ready, but is not sending/receiving data.
Rear Panel and Connections of the Prestige
The following figure shows the rear panel of your Prestige.
Figure 2-2 Prestige Rear Panel and Connections

2.2.1 DSL Port

Connect the Prestige directly to the wall jack using the included DSL cable. Connect a microfilter(s) between the wall jack and your telephone(s). A microfilter acts as low-pass filter (voice transmission takes place in the 0 to 4KHz bandwidth) and is an optional purchase.
2.2.2 Four LAN 10/100M Ports
Ethernet 10Base-T/100Base-T networks use Shielded Twisted Pair (STP) cable with RJ-11 (POTS) connectors or RJ-45 (ISDN) connectors that look like a bigger telephone plug with 8 pins. All LAN ports are auto-sensing, so you may use the crossover cable provided or a straight-through Ethernet cable to connect your Prestige to a computer/external hub.
Prestige 650HW ADSL Router Users Guide When the Prestige is on and properly connected to a computer or a hub, the corresponding LAN LED on the front panel turns on.
2.2.3 PCMCIA Wireless Card Slot
Your Prestige comes with a PCMCIA wireless LAN card slot for wireless LAN connectivity. Follow the steps below to insert the optional PCMCIA wireless LAN card. Step 1. Step 2. Locate the slot on your Prestige. With its 64-pin connector facing the card slot and its label side facing upwards, slide the PCMCIA wireless LANcard into the slot. Never force, bend or twist the wireless LAN card into the slot.

2.4.2 Telephone Microfilters
Telephone voice transmissions take place in the lower frequency range, 0 - 4KHz, while ADSL transmissions take place in the higher bandwidth range, above 4KHz. A microfilter acts as a low-pass filter, for your telephone, to ensure that ADSL transmissions do not interfere with your telephone voice transmissions. The purchase of a telephone microfilter is optional. Step 1. Connect a phone cable from the wall jack to the single jack end of the Y- Connector.
Prestige 650HW ADSL Router Users Guide Step 2. Step 3. Step 4. Connect a cable from the double jack end of the Y-Connector to the wall side of the microfilter. Connect another cable from the double jack end of the Y-Connector to the Prestige. Connect the phone side of the microfilter to your telephone as shown in the following figure.
Figure 2-4 Connecting a Microfilter

P650HW With ISDN

This section relates to people who use their Prestige with ADSL over ISDN (digital telephone service) only. The following is an example installation for the Prestige with ISDN.
Figure 2-5 P650HW with ISDN

Turning On Your Prestige

At this point, you should have connected the ADSL line, the Ethernet port and the power port to the appropriate devices or lines. Push in the power button (located on the back of your Prestige) to turn on your Prestige.
Configuring Your Prestige For Internet Access
Web configurator (refer to the Read Me First). SMT (System Management Terminal). Access the SMT via LAN or WAN using Telnet.
Configure your Prestige for Internet access using:
2.7.1 Connect to your Prestige Using Telnet
The following procedure details how to telnet into your Prestige. Step 1. Step 2. Step 3. In Windows, click Start (usually in the bottom left corner), Run and then type telnet 192.168.1.1 (the default IP address) and click OK. Enter 1234 in the Password field. After entering the password you will see the main menu.
Please note that if there is no activity for longer than five minutes (default timeout period) after you log in, your Prestige will automatically log you out. You will then have to telnet into the Prestige again.
2.7.2 Connect to your Prestige Using the Web Configurator
Step 1. Step 2. Step 3. Launch your web browser. Enter 192.168.1.1 as the URL. In the User Name field, type "admin". In the Password field, type 1234. Click OK.

FIELD DNS Server Address Assignment ENET ENCAP Gateway DESCRIPTION Primary DNS server Secondary DNS server Enter when using RFC 1483 Encapsulation or a static IP address. IP Address Gateway IP Address Enter when using ENET ENCAP Encapsulation. YOUR INFO

3.15.1 Traffic Shaping

Traffic Shaping is an agreement between the carrier and the subscriber to regulate the average rate and burstiness or fluctuation of data transmission over an ATM network. This agreement helps eliminate congestion, which is important for transmission of real time data such as audio and video connections. Peak Cell Rate (PCR) is the maximum rate at which the sender can send cells. This parameter may be lower (but not higher) than the maximum line speed. 1 ATM cell is 53 bytes (424 bits), so a maximum speed of 832 Kbps gives a maximum PCR of 1962 cells/sec. This rate is not guaranteed because it is dependent on the line speed. Sustained Cell Rate (SCR) is the mean cell rate of a bursty, on-off traffic source that can be sent at the peak rate, and a parameter for burst-type traffic. SCR may not be greater than the PCR; the system default is 0 cells/sec. Maximum Burst Size (MBS) is the maximum number of cells that can be sent at the PCR. After MBS is reached, cell rates fall below SCR until cell rate averages to the SCR again. At this time, more cells (up to the MBS) can be sent at the PCR again. If the PCR, SCR or MBS is set to the default of 0, the system will assign a maximum value that correlates to your upstream line rate. The following figure illustrates the relationship between PCR, SCR and MBS.
Figure 3-11 Example of Traffic Shaping From the main menu, type 4 to display Menu 4 - Internet Access Setup, as shown next.
Menu 4 - Internet Access Setup ISP's Name= MyISP Encapsulation= ENET ENCAP Multiplexing= LLC-based VPI #= 8 VCI #= 35 ATM QoS Type= CBR Peak Cell Rate (PCR)= 0 Sustain Cell Rate (SCR)= 0 Maximum Burst Size (MBS)= 0 My Login= N/A My Password= N/A ENET ENCAP Gateway= N/A IP Address Assignment= Dynamic IP Address= N/A Network Address Translation= SUA Only Address Mapping Set= N/A Press ENTER to Confirm or ESC to Cancel: Press ENTER to confirm or ESC to cancel:
Figure 3-12 Internet Access Setup The following table contains instructions on how to configure your Prestige for Internet access.

IP Subnet Mask Gateway IP Address

Metric

Chapter 6 Bridging Setup
This chapter shows you how to configure the bridging parameters of your Prestige.

Bridging in General

Bridging bases the forwarding decision on the MAC (Media Access Control), or hardware address, while routing does it on the network layer (IP) address. Bridging allows the Prestige to transport packets of network layer protocols that it does not route, for example, SNA, from one network to another. The caveat is that, compared to routing, bridging generates more traffic for the same network layer protocol, and it also demands more CPU cycles and memory. For efficiency reasons, do not turn on bridging unless you need to support protocols other than IP on your network. For IP, enable the routing if you need it; do not bridge what the Prestige can route.

Bridge Ethernet Setup

Basically, all non-local packets are bridged to the WAN. Your Prestige does not support IPX.
6.2.1 Remote Node Bridging Setup
Follow the procedure in another section to configure the protocol-independent parameters in Menu 11.1 Remote Node Profile. For bridging-related parameters, you need to configure Menu 11.3 Remote Node Network Layer Options. To setup Menu 11.3 Remote Node Network Layer Options shown in the next figure, follow these steps: Step 1. Step 2. In menu 11.1, make sure the Bridge field is set to Yes. Move the cursor to the Edit IP/Bridge field, then press [SPACE BAR] to set the value to Yes and press [ENTER] to edit Menu 11.3 Remote Node Network Layer Options.

Bridging Setup

Figure 6-1 Menu 11.3 Remote Node Bridging Options Table 6-1 Remote Node Bridge Options
FIELD Bridge (menu 11.1) Edit IP/Bridge (menu 11.1) Ethernet Addr Timeout (min.) (menu 11.3) DESCRIPTION Make sure this field is set to Yes. Press [SPACE BAR] to select Yes and press [ENTER] to display menu 11.3. Type the time (in minutes) for the Prestige to retain the Ethernet Address information in its internal tables while the line is down. If this information is retained, your Prestige will not have to recompile the tables when the line comes back up.
6.2.2 Bridge Static Route Setup
Similar to network layer static routes, a bridging static route tells the Prestige the route to a node before a connection is established. You configure bridge static routes in menu 12.3.1 (go to menu 12, choose option 3, then choose a static route to edit) as shown next.

Prestige 650HW ADSL Router Users Guide NAT never changes the IP address (either local or global) of an outside host.

7.1.2 What NAT Does

In the simplest form, NAT changes the source IP address in a packet received from a subscriber (the inside local address) to another (the inside global address) before forwarding the packet to the WAN side. When the response comes back, NAT translates the destination address (the inside global address) back to the inside local address before forwarding it to the original inside host. Note that the IP address (either local or global) of an outside host is never changed. The global IP addresses for the inside hosts can be either static or dynamically assigned by the ISP. In addition, you can designate servers, for example, a web server and a telnet server, on your local network and make them accessible to the outside world. Although you can make designated servers on the LAN accessible to the outside world, it is strongly recommended that you attach those servers to the DMZ port instead. If you do not define any servers (for Many-to-One and Many-to-Many Overload mapping see Table 7-2), NAT offers the additional benefit of firewall protection. With no servers defined, your Prestige filters out all incoming inquiries, thus preventing intruders from probing your network. For more information on IP address translation, refer to RFC 1631, The IP Network Address Translator (NAT).

7.1.3 How NAT Works

Each packet has two addresses a source address and a destination address. For outgoing packets, the ILA (Inside Local Address) is the source address on the LAN, and the IGA (Inside Global Address) is the source address on the WAN. For incoming packets, the ILA is the destination address on the LAN, and the IGA is the destination address on the WAN. NAT maps private (local) IP addresses to globally unique ones required for communication with hosts on other networks. It replaces the original IP source address (and TCP or UDP source port numbers for Many-to-One and Many-to-Many Overload NAT mapping) in each packet and then forwards it to the Internet. The Prestige keeps track of the original addresses and port numbers so incoming reply packets can have their original values restored. The following figure illustrates this.

Figure 7-1 How NAT Works

Prestige 650HW ADSL Router Users Guide An End IP address must be numerically greater than its corresponding IP Start address.
Menu 15.1.1.1 Address Mapping Rule Type= One-to-One Local IP: Start= End = N/A Global IP: Start= End = N/A Server Mapping Set= N/A Press ENTER to Confirm or ESC to Cancel: Press Space Bar to Toggle.
Figure 7-9 Menu 15.1.1.1 Editing/Configuring an Individual Rule in a Set Table 7-6 Menu 15.1.1.1 Editing/Configuring an Individual Rule in a Set
FIELD Type DESCRIPTION Press [SPACE BAR] and then [ENTER] to select from a total of five types. These are the mapping types discussed in Table 7-2. Server allows you to specify multiple servers of different types behind NAT to this computer. See section 7.5.3 for an example. Only local IP fields are N/A for server; Global IP fields MUST be set for Server. This is the starting local IP address (ILA). This is the ending local IP address (ILA). If the rule is for all local IPs, then put the Start IP as 0.0.0.0 and the End IP as 255.255.255.255. This field is N/A for One-to-One and Server types. 0.0.0.0 N/A EXAMPLE One-to-One

Local IP Start End

Global IP Start This is the starting global IP address (IGA). If you have a dynamic IP, enter 0.0.0.0 as the Global IP Start. Note that Global IP Start can be set to 0.0.0.0 only if the types are 0.0.0.0
Prestige 650HW ADSL Router Users Guide Table 7-6 Menu 15.1.1.1 Editing/Configuring an Individual Rule in a Set
FIELD Start DESCRIPTION This is the starting global IP address (IGA). If you have a dynamic IP, enter 0.0.0.0 as the Global IP Start. Note that Global IP Start can be set to 0.0.0.0 only if the types are Many-to-One or Server. This is the ending global IP address (IGA). This field is N/A for One-to-One, Many-to-One and Server types. Only available when Type is set to Server. Type a number from 1 to 10 to choose a server set from menu 15.2. EXAMPLE 0.0.0.0

End Server Mapping Set

NAT Server Sets Port Forwarding
A NAT server set is a list of inside (behind NAT on the LAN) servers, for example, web or FTP, that you can make visible to the outside world even though NAT makes your whole inside network appear as a single machine to the outside world. Use Menu 15 - NAT Setup to forward incoming service requests to the server(s) on your local network. You may enter a single port number or a range of port numbers to be forwarded, and the local IP address of the desired server. The port number identifies a service; for example, web service is on port 80 and FTP on port 21. In some cases, such as for unknown services or where one server can support more than one service (for example both FTP and web service), it might be better to specify a range of port numbers. In addition to the servers for specified services, NAT supports a default server. A service request that does not have a server explicitly designated for it is forwarded to the default server. If the default is not defined, the service request is simply discarded.

Prestige 650HW ADSL Router Users Guide Many residential broadband ISP accounts do not allow you to run any server processes (such as a Web or FTP server) from your location. Your ISP may periodically check for servers and may suspend your account if it discovers any active services at your location. If you are unsure, refer to your ISP. The most often used port numbers are shown in the following table. Please refer to RFC 1700 for further information about port numbers. Please also refer to the included disk for more examples and details on NAT. Table 7-7 Services & Port Numbers
SERVICES ECHO FTP (File Transfer Protocol) Telnet SMTP (Simple Mail Transfer Protocol) DNS (Domain Name System) Finger HTTP (Hyper Text Transfer protocol or WWW, Web) POP3 (Post Office Protocol) NNTP (Network News Transport Protocol) SNMP (Simple Network Management Protocol) SNMP trap PPTP (Point-to-Point Tunneling Protocol) PORT NUMBER 162 1723
7.4.1 Configuring a Server behind NAT
Follow these steps to configure a server behind NAT: Step 1. Step 2. Enter 15 in the main menu to go to Menu 15 - NAT Setup. Enter 2 to display Menu 15.2 - NAT Server Sets as shown next.
Menu 15.2 - NAT Server Sets 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. Server Server Server Server Server Server Server Server Server Server Set Set Set Set Set Set Set Set Set Set 1 (Used for SUA Only) 10
Enter Set Number to Edit:
Figure 7-10 Menu 15.2 NAT Server Setup Step 3. Enter 1 to go to Menu 15.2.1 NAT Server Setup as follows.
Menu 15.2.1 - NAT Server Setup Rule Start Port No. End Port No. IP Address --------------------------------------------------1. Default Default 0.0.0.0 2. 192.168.1.33 3. 0.0.0.0 4. 0.0.0.0 5. 0.0.0.0 6. 0.0.0.0 7. 0.0.0.0 8. 0.0.0.0 9. 0.0.0.0 10. 0.0.0.0 11. 0.0.0.0 12. 0.0.0.0 Press ENTER to Confirm or ESC to Cancel:
Figure 7-11 Menu 15.2.1 NAT Server Setup Step 4. Enter a port number in an unused Start Port No field. To forward only one port, enter it again in the End Port No field. To specify a range of ports, enter the last port to be forwarded in the End Port No field.
Prestige 650HW ADSL Router Users Guide Step 5. Enter the inside IP address of the server in the IP Address field. In the following figure, you have a computer acting as an FTP, Telnet and SMTP server (ports 21, 23 and 25) at 192.168.1.33. Press [ENTER] at the Press ENTER to confirm prompt to save your configuration after you define all the servers or press [ESC] at any time to cancel.

Step 6.

Figure 7-12 Multiple Servers Behind NAT Example

Menu 24.2 - System Information 1. System Information 2. Console Port Speed
Figure 10-3 Menu 24.2 System Information and Console Port Speed
Prestige 650HW ADSL Router Users Guide Console port speed is included here for use by experienced technicians only.
10.2.1 System Information
Enter 1 in menu 24.2 to display the screen shown next.
Menu 24.2.1 System Maintenance Information Name: Routing: IP ZyNOS F/W Version: V3.40(ES.0)b8 | 11/20/2001 ADSL Chipset Vendor: Alcatel, Version 3.8.130 Standard: Multi-Mode LAN Ethernet Address: 00:a0:c5:01:23:45 IP Address: 192.168.1.1 IP Mask: 255.255.255.0 DHCP: Server Press ESC or RETURN to Exit:
Figure 10-4 Menu 24.2.1 System Maintenance Information Table 10-2 Fields in System Maintenance
FIELD Name Routing ZyNOS F/W Version DESCRIPTION Displays the system name of your Prestige. This information can be changed in Menu 1 General Setup. Refers to the routing protocol used. Refers to the ZyNOS (ZyXEL Network Operating System) system firmware version. ZyNOS is a registered trademark of ZyXEL Communications Corporation.
ADSL Chipset Vendor Standard LAN Ethernet Address IP Address IP Mask
Displays the vendor of the ADSL chipset and DSL version.
This refers to the operational protocol the Prestige and the DSLAM (Digital Subscriber Line Access Multiplexer) are using.
Refers to the Ethernet MAC (Media Access Control) of your Prestige. This is the IP address of the Prestige in dotted decimal notation. This shows the subnet mask of the Prestige.
Prestige 650HW ADSL Router Users Guide Table 10-2 Fields in System Maintenance
FIELD DHCP DESCRIPTION This field shows the DHCP setting (None, Relay or Server) of the Prestige.

10.3 Log and Trace

There are two logging facilities in the Prestige. The first is the error logs and trace records that are stored locally. The second is the UNIX syslog facility for message logging.

10.3.1 Viewing Error Log

The first place you should look for clues when something goes wrong is the error log. Follow the procedures to view the local error/trace log: Step 1. Type 24 in the main menu to display Menu 24 System Maintenance. Step 2. From menu 24, type 3 to display Menu 24.3 System Maintenance Log and Trace.
Menu 24.3 - System Maintenance - Log and Trace 1. View Error Log 2. UNIX Syslog

Please enter selection

If you enable remote management of a service, but have applied a filter to block the service, then you will not be able to remotely manage the service. Enter 11, from menu 24, to display Menu 24.11 Remote Management Control (shown next).
Menu 24.11 - Remote Management Control TELNET Server: Server Port = 23 Secured Client IP = 0.0.0.0 FTP Server: Server Port = 21 Secured Client IP = 0.0.0.0 Web Server: Server Port = 80 Secured Client IP = 0.0.0.0

Server Access = LAN only

Figure 15-2 Menu 24.11 Remote Management Control Table 15-1 Menu 24.11 Remote Management Control
FIELD Telnet Server FTP Server Web Server Port DESCRIPTION Each of these read-only labels denotes a service that you may use to remotely manage the Prestige. This field shows the port number for the remote management service. You may change the port number for a service if needed, but you must use the same port number to use that service for remote management. Select the access interface (if any) by pressing the [SPACE BAR]. Ch i LAN l WAN l All Di bl Th d f lt i 23 EXAMPLE

Access

LAN only
Prestige 650HW ADSL Router Users Guide Table 15-1 Menu 24.11 Remote Management Control
FIELD Access DESCRIPTION Select the access interface (if any) by pressing the [SPACE BAR]. Choices are: LAN only, WAN only, All or Disable. The default is LAN only. The default 0.0.0.0 allows any client to use this service to remotely manage the Prestige. Enter an IP address to restrict access to a client with a matching IP address. EXAMPLE LAN only

Secured Client IP

Once you have filled in this menu, press [ENTER] at the message "Press ENTER to Confirm or ESC to Cancel" to save your configuration, or press [ESC] to cancel.
15.4.2 Remote Management Limitations
Remote management over LAN or WAN will not work when: 1. 2. 3. 4. A filter in menu 3.1 (LAN) or in menu 11.5 (WAN) is applied to block a Telnet, FTP or Web service. You have disabled that service in menu 24.11. The IP address in the Secured Client IP field (menu 24.11) does not match the client IP address. If it does not match, the Prestige will disconnect the session immediately. There is already another remote management session of the same type (Telnet, FTP or Web) running. You may only have one remote management session of the same type running at one time. There is a web remote management session running with a Telnet session. A Telnet session will be disconnected if you begin a web session; it will not begin if there already is a web session.

Verifying TCP/IP Properties Click Start, Programs, Accessories and then Command Prompt. In the Command Prompt window, type "ipconfig" and then press [ENTER]. The window will display information about your connection-specific DNS suffix, IP Address, Subnet Mask and Default Gateway. Setting up Your Windows XP Computer Configuring TCP/IP 1. 2. 3. 4. Click start, Control Panel, Network and Internet Connections and then Network Connections. Right-click the network connection you want to configure and then click Properties. Under the General tab, select Internet Protocol (TCP/IP) (you may need to scroll down) and click Properties. The Internet Protocol TCP/IP Properties window opens. -If you have a dynamic IP address click Obtain an IP address automatically.
Prestige 650HW ADSL Router Users Guide -If you have a static IP address click Use the following IP Address and fill in the IP address, Subnet mask, and Default gateway fields. To configure advanced static address settings for a local area connection, click Advanced, and do one or more of the following to configure additional IP addresses: -In the IP Settings tab, in IP addresses, click Add. -In TCP/IP Address, type an IP address in IP address and a subnet mask in Subnet mask, and then click Add. -Repeat the above two steps for each IP address you want to add. -Configure additional default gateways in the IP Settings tab by clicking Add in Default gateways. -In TCP/IP Gateway Address, type the IP address of the default gateway in Gateway. To manually configure a default metric (the number of transmission hops), clear the Automatic metric check box and type a metric in Metric. -Click Add. -Repeat the previous three steps for each default gateway you want to add. -Click OK when finished. 5. In the Internet Protocol TCP/IP Properties window's General tab: -Click Obtain DNS server address automatically if you do not know your DNS server IP address(es). -If you know your DNS server IP address(es), click Use the following DNS server addresses, type them in the Preferred DNS server and Alternate DNS server fields. If you have previously configured DNS servers, click Advanced and then the DNS tab to order them. 6. 7. 8. 1. 2. Click OK to close the Internet Protocol (TCP/IP) Properties window. Click OK to close the Local Area Connection Properties window. Turn on your Prestige and restart your computer (if prompted). Click Start, All Programs, Accessories and then Command Prompt. In the Command Prompt window, type "ipconfig" and then press [ENTER]. You can also open Network Connections, right-click a network connection, click Status and then click the Support tab. Setting up Your Macintosh Computer Configuring TCP/IP Properties 1. 2. Click the Apple menu, Control Panel and double-click TCP/IP to open the TCP/IP Control Panel. Select Ethernet from the Connect via list.