ZyXEL Prestige 660HW Series
ADSL Router with Wireless + Firewall

Version 3.40 5/2005

Installation Guide
P-660HW Series Quick Start Guide

Overview

The P-660HW is an ADSL Internet gateway with IEEE 802.11g wireless capability and a 4-port built-in switch. You may need your Internet access information. The P-660HW is referred to as the Prestige in this guide. See your Users Guide for background information on all features. This guide is divided into the following sections. 1 Hardware Connections 2 Configuration for Internet Access 3 Wireless Configuration 4 NAT 5 Firewall 6 Troubleshooting

1 Hardware Connections

You need the following before you start.
Prestige Computer(s) Ethernet Cable Telephone Cable Power Adaptor
1 DSL: Connect the Prestige to a telephone jack using a telephone wire. 2 LAN: Use an Ethernet cable to connect a computer to a LAN 10/100M port for initial configuration and/or Internet access. 3 POWER: Use the included power adaptor to connect the POWER socket to an appropriate power source (see the Users Guide for power adaptors specifications by region). After youve made the connections, push in the power button to turn on the Prestige. Look at the front panel LEDs. The PWR/SYS LED blinks while performing system testing. The PWR/SYS and/or WLAN LEDs then turn steady on if the testing is successful. The LAN LED turns on if the LAN port is properly connected.
2 Configuration for Internet Access
You may configure the Prestige for Internet access in any one of these ways:
P-660HW Series Quick Start Guide Configuration Genie Zero Configuration Web Configurator Internet Access Wizard

2.1 Configuration Genie

From the included CD, click Multimedia Auto Provisioner (the installation and configuration assistant) and then click Installation Tutorial. After youve viewed the tutorial, click Configuration Genie at the end of the installation tutorial or from Multimedia Auto Provisioner in the CD.

2.2 Zero Configuration

Launch your web browser and navigate to any web site (for example, www.zyxel.com). The Prestige automatically detects and configures your Internet connection. This may take about two minutes. If you have a PPPoE or PPPoA connection, a screen displays prompting you to enter your Internet account information. Enter the username, password and/or service name exactly as provided. Click Apply.
2.3 Accessing the Web Configurator
1 Launch your web browser. Enter 192.168.1.1 as the web site address.
Note: If you do not see the next screen, then please read Section 6.1 on page 10
2 Click Login. 3 Type a new password (retype it to confirm) and click Apply. Otherwise click Ignore. You then see the main web configurator screen
P-660HW Series Quick Start Guide 4 In the MAIN MENU screen, click WIZARD SETUP.
2.3.1 Internet Access Setup Note: Enter the Internet access information given to you by your ISP exactly in each wizard screen and then click Next to continue or click Back to return to the previous screen. Screen information is not saved when you click Back.
1 From the Mode drop-down list box, select Routing (default) if you want to use routing features such as NAT.

P-660HW Series Quick Start Guide 2 The next wizard screen varies depending on the Encapsulation you chose in the first wizard screen. From the Network Address Translation drop-down list box, select SUA Only if you have one public IP address, Full Feature if you have more than one public IP address (for translation) or None to disable NAT. PPPoE. Select Connect on Demand when you don't want the connection up all the time and specify an idle time-out period (in seconds) in the Max. Idle Timeout field. Select NailedUp Connection when you want your connection up all the time. The Prestige will try to bring up the connection automatically if it is disconnected. ENET ENCAP
Note: You will only see the next two screens in Routing mode.

PPPoA RFC1483

3 Verify your LAN and WAN settings. To change the LAN settings, click Change LAN Configuration; otherwise click Save Settings to save the configuration and go to the final wizard screen.If you change the Prestiges LAN IP address, you must use the new IP address if you want to access the web configurator again.
4 Click Save Settings in the screen shown in step 3 to go to the final wizard screen.The Prestige automatically tests the connection to the computer(s) connected to the LAN port. To test the connection from the Prestige to the ISP, click Start Diagnose. Otherwise click Return to Main Menu to go back to the main screen.

3 Wireless Configuration

WPA-PSK encryption is preferred to WEP because it has user authentication and improved data encryption. If you dont have WPA-capable wireless clients, configure WEP encryption.
Note: Wireless clients and the Prestige must use the same SSID, channel ID, WEP or WPA-PSK key (if enabled).
1 Click the Wireless LAN link under Advanced Setup.
2 Click 802.1x/WPA. Select Authentication Required, then select WPAPSK and then type a Preshared Key.
3 Click Advanced Setup, Wireless LAN, Wireless. In the ESSID field, enter up to 32 printable characters to uniquely identify the Prestige. If you didnt configure WPA-PSK, configure WEP in this screen (not visible if youve configured WPA-PSK).
NAT (Network Address Translation - NAT, RFC 1631) means the translation of an IP address in one network to a different IP address in another. For example, you could translate one public IP address to multiple private IP addresses on your LAN (SUA Only).
Click Advanced Setup and then NAT to open the NAT-Mode screen. Select SUA Only if you have one public IP address and Full Feature if you have multiple public IP addresses (for address translation).

If you have servers on your LAN, configure an SUA server set to have them visible to the outside. From the NAT Mode screen click Edit Details and fill in the fields as shown.

5 Firewall

The firewall is already enabled by default on the Prestige. Click Advanced Setup and then Firewall to open the firewall screen. The firewall protects your LAN from attacks from the Internet. No traffic can enter your LAN unless a request was generated on the LAN first. Click Default Policy to see rule direction information. You can also disable the firewall here if you want.

6 Troubleshooting

PROBLEM CORRECTIVE ACTION None of the LEDs turn on when Make sure that you have the correct power adaptor connected to the Prestige, it you connect the Prestiges is plugged into an appropriate power source and the Prestige is turned on. power. Check all cable connections. If the LEDs still do not turn on, you may have a hardware problem. In this case, you should contact your local vendor. Cannot access the Prestige from my computer. Check the cable connection from your computer to the Prestige. Make sure your computers IP address is in the same subnet as the Prestiges IP address (see Section 6.1 on page 10). Ping the Prestige from a computer on the LAN. Make sure your computers Ethernet adapter is installed and functioning properly. In the computer, click Start, (All) Programs, Accessories and then Command Prompt. In the Command Prompt window, type "ping" followed by the Prestiges LAN IP address (192.168.1.1 is the default) and then press [ENTER]. The Prestige should reply; otherwise see Section 6.1 on page 10. If the Prestiges IP address has changed, then enter the new one as the URL. Use Internet Explorer 6.0 and later or Netscape Navigator 7.0 and later with JavaScript enabled. Make sure you enter the password correctly (the field is case sensitive). If youve forgotten the Prestiges password, use the RESET button. Press the button in for about 10 seconds (or until the PWR/SYS LED starts to blink), then release it. It returns the Prestige to the factory defaults (password is 1234, LAN IP address 192.168.1.1 etc.; see your Users Guide for details). Cannot access the Internet. Verify the Internet connection settings in the wizard. Make sure you entered the correct user name and password if you are using PPPoE or PPPoA. For wireless clients, check that both the Prestige and wireless client(s) are using the same SSID, channel and WEP or WPA-PSK keys (if configured).
6.1 Set Up Your Computers IP Address
This section shows you how to set your Windows NT/2000/XP computer to automatically get an IP address. This ensures that your computer can with your Prestige. Refer to your Users Guide for detailed IP address configuration for other Windows and Macintosh computer operating systems. 1 In Windows XP, click start, Control Panel. In Windows 2000/NT, click Start, Settings, Control Panel. 2 In Windows XP, click Network Connections. In Windows 2000/NT, click Network and Dial-up Connections. 3 Right-click Local Area Connection and then click Properties.

P-660HW Series Quick Start Guide 4 Select Internet Protocol (TCP/IP) (under the General tab in Windows XP) and click Properties. 5 The Internet Protocol TCP/IP Properties screen opens (the General tab in Windows XP). 6 Select the Obtain an IP address automatically and Obtain DNS server address automatically options. 7 Click OK to close the Internet Protocol (TCP/IP) Properties window. 8 Click Close (OK in Windows 2000/NT) to close the Local Area Connection Properties window. 9 Close the Network Connections screen.
6.2 Viewing Your Products Certifications
1 Go to www.zyxel.com. 2 Select your product from the drop-down list box on the ZyXEL home page to go to that product's page. 3 Select the certification you wish to view from this page.

Prestige 660H/HW Series

802.11g Wireless ADSL 2+ 4-port Gateway

Models:

Prestige 660H ADSL 2+ 4 Port Gateway over POTS Prestige 660H ADSL 2+ 4 Port Gateway over

B e n e f i t s

Higher-speed Internet Access The Prestige 660H/HW series is capable of supporting high-speed ADSL, ADSL2 and ADSL2+ over existing copper lines. With speeds of up to 12Mbps

ISDN/U-R2

Prestige 660HW 802.11g Wireless ADSL Port
(ADSL2) or 24Mbps (ADSL2+), the Prestige 660H/HW series offers higher data transfer rates and better bandwidth than traditional ADSL enabled

Gateway over POTS

gateways. The Prestige 660H/HW series also support RE ADSL (Reach Extended ADSL) for better performance at greater distance. The Prestige 660H/HW series offers the key link between todays communications
Gateway over ISDN/U-R2 ZyXELs Prestige 660H/HW series is an all-in-one ADSL gateway for Home and SOHO applications. The ADSL gateway integrates a high-speed ADSL2+ port, 4-port 10/100Mbps auto MDI/MDIX Ethernet switch and a 54Mbps IEEE 802.11g wireless connectivity (Prestige 660HW only). The Prestige 660H/HW series provides SPI (Stateful Packet Inspection) and many Firewall security features to protect against network intrusion. Additional features such as Zero Configuration, Traffic Redirect, and MBM (Media Bandwidth Management), maximize performance while minimizing operation and maintenance costs. Management is further simplified with Web-based configuration and administrator wizards. Highperforming, secure and easy to use, ZyXELs Prestige 660H/HW is the best choice for Home and SOHO needs.
services and tomorrows converged services. Higher-speed and Wider-range Wireless LAN Connectivity (Prestige 660HW only) Compliance with 802.11g wireless standard allows for data transmission speeds of up to 54Mbps. With 802.11g+ wireless technology, the Prestige 660HW series delivers wireless transmission rates of up to 100 Mbps when used with ZyXELs ZyAIR G-160 Wireless PC Card. The Prestige 660HW series easily extends a wired network for mobility and flexibility. Robust, State-of-the-Art Firewall Security The ICSA certified ZyNOS operating system ensures state-of-the-art Firewall performance and robust security from the Prestige 660H/HW series. Based on Stateful Packet Inspection, DoS (Denial of Service) and DDoS, it provides the first line of defense against hackers, network intruders, and other hazardous threats. Media Bandwidth Management (MBM) The Prestige 660H/HW series enables network administrators to allocate network resources while guaranteeing Quality of Service (QoS). The MBM (Media Bandwidth Management) function prioritizes media services, increasing productivity and efficiency in daily operation by tailoring a system to specific demands such as VoIP, video streaming, videoconferencing and MP3 applications. Zero Configuration The Prestige 660H/HWs Zero Configuration technology allows users to hook up a DSL connection without hassle. The user-friendly design, which is embedded in the gateway, is OS independent and supports all kinds of operating systems in the host PC.

F e a t u r e s

ADSL Compliant RADSL (ANSI T1.413 Issue 2) G.dmt ADSL over POTS (G.992.1 Annex A) G.dmt ADSL over ISDN (G.992.1 Annex B and U-R2) G.lite (G.992.2) ADSL2 G.dmt.bis (G.992.3)* ADSL2 G.lite.bis (G.992.4)* ADSL2+ (G.992.5)* Reach Extended ADSL (RE ADSL)* ATM Support 8 PVCs Support RFC 1483/2684 Multiple Protocol over AAL5 RFC 2364 PPP over AAL5 RFC 2516 PPP over Ethernet VC and LLC Multiplexing Traffic Shaping UBR, CBR, VBR-nrt ATM Forum UNI 3.1/ 4.0 PVC I.610 OAM F4/F5 loop-back, AIS, and RDI OAM cells TR-37, TR-62 DSL Auto Configuration* Firewall Security Stateful Packet Inspection Prevent DoS, DDoS Attack Policy based Access Control Content Filtering IP & Generic Packet Filtering Real-time Attack Alert and Logs Wireless (Prestige 660HW only) 802.11g Compliance 802.11g+ 100Mbps Accelerator* Comply with 802.11b+ 22Mbps 64/128/256 bits WEP Encryption Dynamic WEP Key MAC Address Filtering WPA, WPA-PSK/TKIP 802.1X Authentication with RADIUS Client Routing Support IEEE 802.1d Transparent Bridging IP Routing: TCP, UDP, ICMP, ARP RIP1v1 and RIPv2 IP Multicast IGMP v1/v2 IP Policy Route IP Management SUA/Multi-NAT Internet Sharing Multimedia Support VPN (IPSec, PPTP, L2TP) Pass-through DHCP Server/Relay/Client DNS Proxy Dynamic DNS UPnP Support Network Management Web based Configuration Command-line Interpreter (CLI) Telnet Remote Management SNMP Support FTP/TFTP firmware upgrade and configuration backup/restore Built-in Diagnostic Tool Application Traffic Redirect MBM (Media Bandwidth Management) QoS Zero Configuration Call Scheduling Budget Management

* For future release

S p e c i f i c a t i o n s
Hardware Specification ADSL: One RJ-11 or RJ-45 Port LAN: 4-Port Switch,10/100M Auto MDI/MDIX Antenna: 2dbi Reset Button Status LEDs Indicator Power: 12V DC Physical Specification Dimensions: 180(L) x 128(D) x 36(H) mm Weight: 350g Operating Environment Temperature: 0 ~ 40C Humidity: 20 ~ 85% (non-condensing)

A p p l i c a t i o n

D i a g r a m
Internet Security/WLAN Applications
Content Filtering Firewall

Internet

World Wide Web

Attack

ZyAIR 11g PC Card ZyAIR 11g USB Adapter r ZyAIR 11g PCI Card

Hackers

Home/SOHO
Media Bandwidth Management
VoD Server VoD 1000K TV IP-based Set-top box Gaming 70K Online Gaming VoIP 100K VoIP Phone

SIP Server

This product is designed for the 2.4 GHz WLAN network throughout the EC region
Corporate Headquarters ZyXEL Communications Corp. Tel: +886-3-578-3942 Fax: +886-3-578-2439 Email: sales@zyxel.com.tw http://www.zyxel.com http://www.zyxel.com.tw
Denmark Tel: +00 Fax: +07 Email: sales@zyxel.dk http://www.zyxel.dk Finland Tel: +358-9-Fax: +358-9-Email: sales@zyxel.fi http://www.zyxel.fi
France Tel: +33 (0)97 Fax: +33 (0)20 Email: info@zyxel.fr http://www.zyxel.fr Germany Tel: +Fax: +Email: sales@zyxel.de http://www.zyxel.de
North America Tel: +1-800-255-4101, +1-714-632-0882 Fax: +1-714-632-0858 Email: sales@zyxel.com http://www.us.zyxel.com Norway Tel: +80 Fax: +81 Email: sales@zyxel.no http://www.zyxel.no
Spain Tel: +Fax: +Email: sales@zyxel.es http:// www.zyxel.es Sweden Tel: +Fax: +Email: sales@zyxel.se http://www.zyxel.se

65-100-600002

Copyright2004 ZyXEL Communications Corporation. All rights reserved. ZyXEL, the ZyXEL logo are registered trademarks of ZyXEL Communications Corp. Other trademarks and service names referenced are properties of their respective holders. All specifications are subject to change without notice.