LED Battery Level Indicator Clear Voice Recording System Includes 1 Cassette and 2 Batteries Built-In Microphone One Touch Recording Cue and Review with Slide Control Sony-Matic Automatic Recording Level Control Automatic Shut-Off at End of Tape 2-Speed Record/Playback DC-In Jack L/R Monaural Earphone Jack Hinged Battery Lid
Microcassette Voice Recorder

Features

LED Battery Level Indicator provides visible indication of battery power remaining. Clear Voice Recording System improves and enhances voice quality during record and playback. Includes 1 Cassette and 2 Batteries so this recorder is ready to go to work for you, right out of the box. Built-In Microphone for extra convenience, eliminates the need for an external microphone. One Touch Recording for simplified, quick Play/Record operation. Cue and Review with Slide Control provides sound during Fast Forward and Rewind modes to help find specific passages. Sony-Matic Automatic Recording Level Control uses advanced circuitry to ensure correct recording level. Automatic Shut-Off at End of Tape pops up buttons to conserve battery power, reduces mechanical wear, and alerts you that the end of the tape has been reached. 2-Speed Record/Playback gives you the option of recording on a standard microcassette at either normal speed of 2.4cm/sec or half the normal speed at 1.2cm/sec for extended recording or dictation sessions. DC-In Jack for 2-way operation using replaceable batteries or with optional AC adaptor. L/R Monaural Earphone Jack provide sound in both ears when using with an optional stereo headset. Hinged Battery Lid helps prevent accidental loss when changing batteries.

Convenience

Automatic Shut-off: Yes

Convenience Features

Search Features: Cue and Review with slide control

Hardware

Display: Battery Indicator
Output Power: 250mW Power Requirements: 120V AC Adaptor (Optional) Battery Type: "AAA" x 2

Speaker

Type: Built-In Speaker Dimensions: 1.4" (36mm) diameter

Inputs and Outputs

Microphone Input: N/A DC-In: 3V Headphone Output(s): 1 (Mini)

Dimensions

Weight: 3.42 oz (97 g) Measurements: W 2 3/8" x H 4 4/11" x D 7/8" (60.2 x 110.8 x 22.3mm) including projecting parts and controls

Supplied Accessories

Microcassette x 1 "AAA" Batteries x 2 Color: Black UPC Code: 027242667662
2006 Sony Electronics Inc. Features and specifications are subject to change without notice. Non-metric weights and measures are approximate. All rights reserved. Sony, Clear Voice, Sony-Matic, and like.no.other are trademarks of Sony. Reproduction in whole or in part without written permission is prohibited.

Specifications

General
Type of Use: Portable Voice Recorder Recording Media: Microcassette Recording and Playback Times: up to 120 minutes (mono)
Recording System: 2 Track, 1 Channel Monaural Microphone: Built-in Frequency Range: 300-4000Hz (2.4cm/sec) Tape Speed: 2 Speeds (2.4cm/sec, 1.2cm/sec)

Audio Features

Recording Features: Clear Voice Sound System, One-Touch Record, Sony-Matic Automatic Recording Level
Please visit the Dealer Network for current information at www.sony.com/dn Sony Electronics Inc. 16530 Via Esprillo Drive San Diego, CA 92127 1-800-222-7669 www.sony.com Last Updated: 11/30/2008

2-659-606-13(1)

AIT Drive

Users Guide

AIT-3 Ex TAPE DRIVE

SDX-870V Series

AIT-2 Turbo TAPE DRIVE

SDX-570V Series

AIT-1 Turbo TAPE DRIVE

SDX-470V Series

2005 Sony Corporation
This document contains proprietary information which is protected by copyright. All rights reserved. No part of this document may be photocopied, reproduced or translated to another language without prior written consent of Sony. The information contained in this document is subject to change without notice. SONY MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS DOCUMENT. Sony shall not be liable for errors contained herein, indirect, special, incidental or consequential damages in connection with the furnishing, performance or use of this document.
Hinweis MaschinenlrminformationsVerordnung - 3. GPSGV, der hchste Schalldruckpegel betrgt 70 dB(A) oder weniger gemss EN ISO 7779. ATTENTION According to the EU Directives related to product safety, EMC and R&TTE the manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. The Authorised Representative is Sony Deutschland GmbH, Hedelfinger Strasse 61,70327 Stuttgart, Germany. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents. AUFMERKSAMKEIT Im Sinne der EU Richtlinien bezglich Produktsicherheit, EMV und R&TTE ist Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan der Hersteller dieses Produktes. Bevollmchtigter ist Sony Deutschland GmbH, Hedelfinger Strasse 61, D-70327 Stuttgart. Fr Service oder Garantieangelegenheiten wenden Sie sich bitte an die in separaten Service oder Garantiedokumenten angegebenen Adressen.

WARNING

To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Your AIT TAPE DRIVE is assigned a Model No. SDX-870V, SDX-570V, SDX-470V for regulatory compliance certifications. The number is indicated on the model number label on your drive along with the rated voltage and current.
European Union Restriction of Hazardous Substances Directive compliant. Entspricht der Richtlinie der Europischen Union zur Beschrnkung der Verwendung gefhrlicher Stoffe.
VORSICHT Fr Kunden in Deutschland Diese Ausrstung erfllt die Europischen EMC-Bestimmungen fr die Verwendung in folgender / folgenden Umgebung(en): Wohngegenden Gewerbegebiete Leichtindustriegebiete (Diese Ausrstung erfllt die Bestimmungen der Norm EN55022, Klasse B.) Sony Corporation tmto prohlauje, e tento SDX-870V/ AIT Drive je ve shod se zkladnmi poadavky a dalmi pslunmi ustanovenmi smrnice 1999/5/ES. Podrobnosti lze zskat na nsledujc URL: http://www.compliance.sony.de/ Undertegnede Sony Corporation erklrer herved, at flgende udstyr SDX-870V/AIT Drive overholder de vsentlige krav og vrige relevante krav i direktiv 1999/5/EF. For yderligere information g ind p flgende hjemmeside: http://www.compliance.sony.de/ Hierbij verklaart Sony Corporation dat het toestel SDX-870V/AIT Drive in overeenstemming is met de essentile eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Nadere informatie kunt u vinden op: http://www.compliance.sony.de/

USE Power Sources This unit should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of electrical power, consult your dealer or local power company. For the unit with a three-wire grounding type ac plug: If you are unable to insert the plug into the outlet, contact your electrician to have a suitable plug installed. Do not defeat the safety purpose of the grounding plug. AC Power cord: (for AC mains operating unit only) The AC power cord should have appropriate safety approvals or marking for the country in which the equipment will be used. Consult your dealer or local power company. Cleaning Unplug the unit from the wall outlet before cleaning or polishing it. Do not use liquid cleaners or aerosol cleaners. Use a cloth lightly dampened with water for cleaning the exterior of the unit. Object and Liquid Entry Never push objects of any kind into the unit through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the unit.

IMPORTANT SAFEGUARDS

For your protection, please read these safety instructions completely before operating the appliance, and keep this manual for future reference. Carefully observe all warnings, precautions and instructions on the appliance, or the one described in the operating instructions and adhere to them.
INSTALLATION Water and Moisture Do not use power-line operated units near water for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, etc. Power-Cord Protection Route the power cord so that it is not likely to be walked on or pinched by items placed upon or against them, paying particular attention to the plugs, receptacles, and the point where the cord exits from the appliance. Accessories Do not place the unit on an unstable cart, stand, tripod, bracket, or table. The unit may fall, causing serious injury to a child or an adult, and serious damage to the unit. Use only a cart stand tripod, bracket, or table recommended by the manufacturer. Ventilation The slots and openings in the cabinet are provided for necessary ventilation. To ensure reliable operation of the unit, and to protect it from overheating, these slots and openings must never be blocked or covered. Never cover the slots and openings with a cloth or other materials. Never block the slots and openings by placing the unit on a bed, sofa, rug or other similar surface. Never place the unit in a confined space, such as a bookcase, or builtin cabinet, unless proper ventilation is provided.

SERVICE Damage Requiring Service Unplug the unit from the wall outlet and refer servicing to qualified service personnel under the following conditions: When the power cord or plug is damaged or frayed. If liquid has been spilled or objects have fallen into the unit. If the unit has been exposed to rain or water. If the unit has been subject to excessive shock by being dropped, or the cabinet has been damaged. If the unit does not operate normally when following the operating instructions. Adjust only those controls that are specified in the operating instructions. Improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the unit to normal operation. When the unit exhibits a distinct change in performance - this indicates a need for service. Servicing Do not attempt to service the unit yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer to all servicing to qualified service personnel.

Contents

SDX-870V/SDX-570V/SDX-470V Tape Drive.. 8 Introduction.... 9 Product Features.... 9 Precautions.... 10 Installation.... 12 Connectors.... 12 Option Switches (DIP Switch)... 13 Mounting Holes.... 15 Reconfiguring from 5.25" Model to 3.5" Model.. 17 Orientation.... 18 Attaching and Removing the Dust Cover... 19 Attaching the Dust Cover... 19 Removing the Dust Cover... 21 Operation.... 22 Location of 3 LEDs... 22 Drive Operation.... 23 Interface Implementation... 25 Supported ATA Commands... 25 Supported ATAPI Packet Commands.. 25 Specification.... 26 Product Specifications... 26 Sony Contacts.... 28
SDX-870V/SDX-570V/SDX-470V Tape Drive
The Sony SDX-870V/SDX-570V/SDX-470V drive is a high capacity data storage device using Advanced Intelligent tape (AIT) technology. The SDX-870V/SDX-570V/SDX-470V drive achieves high data reliability through Read-After-Write, an additional level of Error Correction Code, and other features. The Sony SDX-870V/SDX-570V/SDX-470V drive stores data on tape using a standard format called AIT (Advanced Intelligent Tape) and ALDC formats.

Introduction

Product Features
Data Capacity SDX-870V 150 GB uncompressed (with AIT-3 Ex 246 m tape) 390 GB compressed* (with AIT-3 Ex 246 m tape) 80 GB uncompressed (with AIT-2 Turbo 186 m tape) 208 GB compressed* (with AIT-2 Turbo 186 m tape) 40 GB uncompressed (with AIT-1 Turbo 186 m tape) 104 GB compressed* (with AIT-1 Turbo 186 m tape) Transfer Rate (sustained) 18 MB/s uncompressed (with AIT-3 Ex tape) Buffer Memory 64 MB

SDX-570V

12 MB/s uncompressed (with AIT-2 Turbo tape)

SDX-470V

6 MB/s uncompressed (with AIT-1 Turbo tape)
* Assuming a 2.6 : 1 compression ratio. (The compression ratio varies according to the type of data.)
SDX-870V/SDX-570V/SDX-470V The SDX-870V series drives have the following features: Supports reading and writing to data cartridges conforming to the AIT-2 Turbo, AIT-3 and AIT-3 Ex formats. Supports reading from data cartridges conforming to the AIT-E Turbo, AIT-1, AIT-1 Turbo and AIT-2 formats. The SDX-570V series drives have the following features: Supports reading and writing to data cartridges conforming to the AIT-E Turbo, AIT-1, AIT-1 Turbo, AIT-2 and AIT-2 Turbo formats. The SDX-470V series drives have the following features: Supports reading and writing to data cartridges conforming to the AIT-E Turbo, AIT-1 and AIT-1 Turbo formats.

Precautions

Installation
Avoid placing the drive in a location subject to: high humidity high temperature mechanical shock and vibration direct sunlight

Operation

Do not move the drive while it is operating. It may cause malfunction. Avoid exposing the drive to sudden changes from low to high temperatures. This may cause water condensation to collect inside the drive. If the ambient temperature should suddenly rise while the drive is turned on , wait at least one hour before turning on the drive. If you attempt to operate the drive immediately after a sudden increase in temperature, a malfunction may occur. Turning off the power to the drive while it is writing to tape may cause the tape to become unreadable. All previously negotiated parameters will be lost, whenever power to the drive is cycled.

Transportation

Keep the original packing materials to facilitate transportation of the drive. Always remove the data cartridge before moving the drive. After removing the drive from the computer, repack the drive into its original packing.

Useable Cartridges

The SDX-870V can be used with data cartridges marked with the AIT-E Turbo (read only), AIT-1 Turbo (read only), AIT-2 Turbo, AIT-1 (read only), AIT-2 (read only), AIT-3 or AIT-3 Ex logo. The SDX-570V can be used with data cartridges marked with the AIT-E Turbo, AIT-1 Turbo, AIT-2 Turbo, AIT-1 or AIT-2 logo. The SDX-470V can be used with data cartridges marked with the AIT-E Turbo, AIT-1 Turbo or AIT-1 logo.
Be sure to use only the cartridges designed specifically for AIT. Do not use anything but AIT cartridges with this system, as doing so can damage the AIT drive. Although commercially available 8 mm videotapes resemble AIT cartridges in appearance, they have entirely different specifications and cannot be used.

Connectors

The following figures apply to the SDX-570V.
SATA Power Connector (*1)

SATA Signal Connector

Legacy Power Connector (*2)

5V GND GND 12V

Caution
DO NOT USE both the SATA Power Connector (*1) and Legacy Power Connector (*2) at the same time. Using both connectors possible cause the system damage.
Option Switches (DIP Switch)

DIP Switch

DIP Switch Positions

Default

Drive Mode (OFF) Drive Mode (OFF) Drive Mode (OFF) Drive Mode (OFF) Reserved (OFF) Periodic Cleaning Req (ON) DC Control (1) (ON) DC Control (2) (OFF)

ON OFF

Cleaning Request Mode Periodic cleaning requests can be enabled by a DIP switch.
Drive Mode Drive Mode Drive Mode Drive Mode Reserved Periodic Cleaning Req (ON) DC Control (1) DC Control (2)
When switch 6 is ON, cleaning requests are enabled. When enabled, the CLEANING REQUEST LED on the front panel lights after every 100 hours of operation. When this LED lights, clean the drive with a cleaning cartridge.
Note To maintain the drive in optimum condition in environments affected by dust and other contaminants, we recommend keeping cleaning requests enabled.
Data Compression Control DIP switch Data compression can be selected by DIP switches. Data compression is enabled while position 7 [DC Control (1)] is ON. Control by host can be disabled when position 8 [DC Control (2)] is ON.
_ 4.8 + 0.5mm _ [0.19"+ 0.02"]
_ 60.0+ 0.3mm _ [2.36" + 0.01"] _ _ 90.0 + 0.3mm [3.54" + 0.01"]
6-M3 (depth 2.5mm [0.10"] max.) 6-M3 (depth 2.5mm [0.10"] max.)

Mounting Holes

For 3.5" Standard Height
_ 9.8 + 0.6 mm _ [0.39" + 0.02"] _ _ 7.4 + 0.6mm [0.29"+ 0.02"] _ _ 155.0 + 0.5mm [6.10"+ 0.02"]
_ 41.2 + 0.5mm _ [1.62" + 0.02"]
_ 21.0+ 0.3mm _ [0.83"+ 0.01"]

8.30.5 mm (0.330.02 in)

96.1 mm (3.78 in)
_ _ 94.0 + 0.5mm [3.70" + 0.02"]
_ 42.0 + 0.3mm _ [1.65" + 0.01"] _ _ 70.0+ 0.3mm [2.76" + 0.01"]

_ _ 101.6 + 0.5mm [4.00"+ 0.02"]
_ 31.0 + 0.3mm _ [1.22"+ 0.01"]
_ 21.8 + 0.5mm _ [0.86" + 0.02"]
_ _ 79.2 + 0.3mm [3.12"+ 0.01"]

7.0mm [0.28"]

_ 9.9 + 0.5mm _ [0.39" + 0.02"]
For 5.25" Half Height
_ _ 7.4 + 0.6mm [0.29"+ 0.02"] _ 9.8 + 0.6 mm _ [0.39"+ 0.02"]
_ _ 31.0 + 0.3mm [1.22" + 0.01"]
_ 47.5 + 0.3mm _ [1.87"+ 0.01"] _ _ 79.2 + 0.3mm [3.12" + 0.01"] _ _ 155.0 + 0.5mm [6.10"+ 0.02"] _ _ 70.0 + 0.3mm [2.76" + 0.01"] _ 42.0 + 0.3mm _ [1.65"+ 0.01"]
1460.5 mm (5.750.02 in) 96.1 mm (3.78 in)
_ _ 149.0 + 0.5mm [5.87"+ 0.02"]
_ _ 146.0+ 0.5mm [5.75" + 0.02"]
_ _ 139.6 + 0.5mm [5.50" 0.02"] +
_ 47.5 + 0.3mm _ [1.87"+ 0.01"]
Reconfiguring from 5.25" Model to 3.5" Model
You can reconfigure the 5.25" model to the 3.5" model yourself.
Remove the 2 screws for each side rail. Take the side rail off.

Side Rail (L)

Side Rail (R)

Orientation

Attaching and Removing the Dust Cover

Attaching the Dust Cover

Align the dust covers hinge clips (one on each side) with the pins of the drive bezel.
The dust cover should be positioned so that the magnets* on the covers back face the drive bezel.
This magnet does not affect the tape of the cartridge.
Holding the dust cover at an angle as shown in the figure below, set the hinge clips on top of the bezel pins, positioning them so that they bracket the pins.
Press down at an angle on each side in turn until you hear the hinge clips click into place.
Do not press the dust cover in horizontally from the front. Doing so could cause the dust cover to break.

Close the dust cover.

This completes attachment of the dust cover.

Removing the Dust Cover

Open the dust cover. Holding the dust cover at both corners, carefully raise the dust cover.
The dust cover hinge clips and drive bezel pins uncouple.

We recommend that you use the drive with the dust cover.

Location of 3 LEDs

There are three LED indications (TAPE MOTION LED, CLEANING REQUEST LED, REPLACE TAPE LED) and an EJECT button on the front panel of the unit. Front Panel (for 3.5" Standard Height)
Advanced Intelligent Tape

TAPE MOTION

CLEANING REQUEST

REPLACE TAPE

EJECT button
LED Indication for Drive Status
The LED indicators are defined as follows.
LED TAPE MOTION CLEANING REQUEST Independent Independent Independent Independent Independent Independent Independent REPLACE TAPE Independent Independent Independent Independent Independent Tape Loaded Tape Access in Progress (write/read) Tape Access in Progress (others) Cleaning is requested Cleaning is Not Completed Media Error Occurred H/W Error Occurred
on Slow 1 pulse (0.9 sec on/0.3 sec off) Fast 1 pulse (0.3 sec on/0.3 sec off)

Drive Operation

Loading a Cartridge
While setting the data cartridge, do not turn off the host computer. This may cause a malfunction or damage data.
Turn on the host computer. Check that the drives TAPE MOTION LED, CLEANING REQUEST LED and REPLACE TAPE LED go off. Open the dust cover.
Set the AIT data cartridge orientation as shown here and insert it into the data cartridge slot.
By inserting the data cartridge to the extent, it is automatically set in the drive and the TAPE MOTION LED lights.

Unloading a Cartridge

The cartridge can be removed from the SDX-870V, SDX-570V and SDX-470V either in response to a ATAPI Unload Command, or by pressing the EJECT bottom. By pressing EJECT button, the tape is rewound and the cartridge ejected from the slot.
Write-protecting a Cartridge
Cartridges can be write-protected by sliding the tab on the back of the cartridge. In this state, data can be read from the tape but not written onto it.
AIT-1 AIT-E Turbo Using your fingernail, push the switch in AIT-1 Turbo the direction of the arrow to protect the tape from writing or accidental erasure. AIT-2 AIT-2 Turbo AIT-3 AIT-3 Ex Return the switch to its original position to re-enable writing.

Using a Cleaning Cartridge
To keep the AIT drive in top condition, clean the head as needed using a cleaning cartridge with the AIT logo. When the head needs cleaning, the CLEANING REQUEST indicator lights.

How to Clean

Load the cleaning cartridge (SDX1-CL, SDX3X-CL) into the AIT drive. Cleaning starts automatically. After about 15 seconds, cleaning will stop and the cartridge will be ejected automatically.
Do not rewind the cleaning cartridge and reuse it. When you reach the end of the cartridge, dispose it and buy a new cleaning cartridge with the AIT logo.

Storage Precautions

Keep cartridges in their cases when not in the drives. Avoid storing cartridges in dusty locations, in direct sunlight, near heaters or air conditioners, or in humid locations. Do not place cartridges on dashboards or in car storage trays.

Interface Implementation

Supported ATA Commands
ATAPI SOFT RESET (0x08) EXECUTE DRIVE DIAGNOSTIC (0x90) ATAPI PACKET COMMAND (0xA0) ATAPI IDENTIFY DEVICE (0xA1) STANDBY IMMEDIATE (0xE0) IDLE IMMEDIATE (0xE1) CHECK POWER MODE (0xE5) SLEEP (0xE6) SET FEATURE (0xEF)
Supported ATAPI Packet Commands
Mandatory ATAPI command set: Supporting most of all SCSI commands in the AIT Tape Drive. ERASE INQUIRY LOAD/UNLOAD LOCATE LOG SELECT LOG SENSE MODE SELECT MODE SENSE READ READ POSITION REQUEST SENSE REWIND SPACE TEST UNIT READY WRITE WRITE BUFFER WRITE FILEMARK

Specification

Product Specifications

Dimensions

Height Width Depth 3.5" 41.2 mm (1.62 in) 101.6 mm (4.0 in) 155.0 mm (6.1 in) 5.25" 41.2 mm (1.62 in) 146.0 mm (5.75 in) 155.0 mm (6.1 in)
3.5" 5.25" SDX-870V 780 g (27.5 oz.) 1010 g (35.6 oz.) SDX-570V 780 g (27.5 oz.) 1050 g (37.0 oz.) SDX-470V 740 g (26.1 oz.) 970 g (34.2 oz.)
Temperature and Humidity Range
Temperature Operating Non-Operating (mech.) Non-Operating (tape) Humidity Operating 20 to 80% RH, non-condensing Maximum wet bulb temperature : 26 C (78.8 F) 5 to 95% RH (RH<30%/h) Maximum wet bulb temperature : 45 C (113 F) 20 to 80% RH (RH<30%/h) 5 C to 40 C (T<10 C/h) (41 F to 104 F (T<18 F/h)) 40 C to 70 C (T<20 C/h) ( 40 F to 158 F (T<36 F/h)) 40 C to 45 C (T<20 C/h) ( 40 F to 113 F (T<36 F/h))

Non-Operating (mech.)

Non-Operating (tape)

Power Requirements

SDX-870V Voltage 5 V +/ 5 % 12 V +/ 10 % SDX-570V Voltage 5 V +/ 5 % 12 V +/ 10 % SDX-470V Voltage 5 V +/ 5 % 12 V +/ 10 % Max Ripple 100 mVp-p 150 mVp-p Current Typical 1.0 A 0.3 A Maximum 1.4 A 1.4 A Max Ripple 100 mVp-p 150 mVp-p Current Typical 1.4 A 0.5 A Maximum 1.7 A 1.3 A Max Ripple 100 mVp-p 150 mVp-p Current Typical 1.4 A 0.75 A Maximum 2.0 A 2.0 A

Air-cooling Requirement

Surrounding temperature < 40 C (104 F) Clean air flow is recommended to minimize the possibility of data loss.

Sony Contacts

For further information, please contact:
Sony Electronics Inc., Tape Storage Solutions (USA) URL: http://www.storagebysony.com Sony Corporation Electronic Devices Marketing Group, Product Marketing Div. Computer Peripherals Dept. Tape Streamer Section Osaki Gate City East Tower, 1-11-1, Osaki Shinagawa-ku, Tokyo, 141-0032 Japan TEL: (81) 3-5435-3486 FAX: (81) 3-5435-3565 Sony of Canada Ltd., AV/IT Marketing Group Computer Peripherals Product Marketing 115 Gordon Baker Road Toronto, Ontario, M2H 3R6 Canada TEL: (416) 499-1414 or (1) 800-961-7669 FAX: (416) 499-8541 Sony Business Europe URL: http://www.sonyisstorage.com/ Electronics Devices Marketing (Singapore) (A division company of Sony Electronics (S) Pte. Ltd.) Enterprise Storage Solutions Dept. 2 International Business Park, #01-10 Tower One, The Strategy, Singapore 609930 TEL:65-6544-8000 FAX:65-6544-7390 Sony Corporation of Hong Kong Ltd. Computer Peripheral Sales & Marketing Division Electronic Devices Marketing Hong Kong 45/F, The Lee Gardens, 33 Hysan Avenue, Causeway Bay, Hong Kong TEL: (852) 2909-1008 FAX: (852) 2909-2001 Sony Corporation of Hong Kong Ltd. Beijing Rep. Office Computer Peripheral Div. Full Link Plaza Tower A 11/F., No.18 Chaoyangmenwai Ave., Beijing 100020 P.R.C. TEL:86-10-6588-0633 FAX:86-10-6588-0855 URL: http://www.sony.com.cn/ed/cp/ait/
Sony Corporation of Hong Kong Ltd., Electronic Devices Marketing Hong Kong Computer Peripherals Sales & Marketing Div. 8/F, One Corporate Avenue, 222 Hu Bin Road. Luwan District, Shanghai. P.R.C. Postcode 200021 TEL: 86-21-6121-6878 URL: http://www.sony.com.cn/ed/cp/ait/ Sony Brasil Ltda. Rua Inocncio Tobias, 125-BlocoA, CEP01144-000, So Paulo -SP-Brasil TEL: (55) 11-3824-6586 to 6598 FAX: (55) 11-3611-9064 URL: http://www.sonybrasil.com Sony Australia Limited 33-39 Talavera Rd. NORTH RYDE, NSW 2113 TEL: 1300-13-7669 FAX: 02-9870-5864 e-mail: CIC-customerissues@ap.sony.com Sony New Zealand Akoranga Business Park NORTH SHORE, AUCKLAND TEL: 0800-76-6969 FAX: 09-308-9300 e-mail: CIC-customerissues@ap.sony.com Sony Chile Ltda Av. Kennedy 8017, Las Condes, Santiago, Chile TEL: (02) 210-6000 FAX: (02) 210-5417 Sony Taiwan Limited Optical Devices Storage Dept. Data Storage Section 5F, 145 Changchun Road, Taipei 104, Taiwan TEL: 886-2-2522-7920 FAX: 886-2-2522-2153 Sony Korea Corporation EDMK CP Sales & Marketing Team 34F, ASEM Tower, World Trade Center, 159-1, Samsung-Dong, Kangnam-Ku, Seoul, 135-798, Korea TEL: 82-2-6001-4249 FAX: 82-2-6001-4115 URL: http://www.sony.co.kr/cp/ Sony Gulf FZE Computer Display & Peripheral Div. P.O.BOX 16871, Jebel Ali, Dubai, U.A.E. TEL: 971-4-8815488 or 8816912 FAX: 971-4-8817210 or 8816259 Sony Marketing of Japan Business Solution Dept. Server Solution Marketing Section URL: http://www.sony.co.jp/STORAGE

Printed on 100% recycled paper.

Sony Corporation

Printed in Japan