Seiko 7009, size: 38 KB
Here you can find all about Seiko 7009 like movement and other informations. For example: watch.
Seiko 7009 manual (user guide) is ready to download for free.
On the bottom of page users can write a review. If you own a Seiko 7009 please write about it to help other people.
[ Report abuse or wrong photo | Share your Seiko 7009 photo ]
User reviews and opinions
No opinions have been provided. Be the first and add a new opinion/review.
INSTRUCTIONS FOR ANALOGUE QUARTZ AND MECHANICAL WATCHES
Your watch is one of the following six types of analogue quartz and mechanical watches. Before using your new watch, please read the instructions pertaining to your watch type; they will help you to get the best out of the watch.
Some models have a screw down crown instead of a standard crown.
How to unlock the crown: Unscrew the crown by turning it counterclockwise. Then, pull it out for time/calendar setting. How to lock the crown: Push the crown back to the normal position. Then, turn it clockwise while pressing it until it locks in place. When using the watch in water: Before using the watch in water, make sure the crown is screwed in completely. Do not operate the crown when the watch is wet or in water.
Two hands without calendar Two hands with date calendar Two hands with day and date calendar
Three hands without calendar Three hands with date calendar Three hands with day and date calendar
Calibre number of your watch
Please check the case back of your watch to find the calibre number inscribed on it, and read the instructions pertaining to your watch calibre number. It is a 4-digit number to the left of the hyphen mark. MECHANICAL WATCHES : Cal. 4206, 4207, 4217, 7002, 7009, 7019, 4R15, 4R16, 4S15, 7S25, 7S26, 7S35, 7S36, 7S55 ANALOGUE QUARTZ WATCHES : All other calibres
[DISPLAY AND HANDS]
Minute hand Crown Date
How to start a mechanical watch
Cal. 4206, 4207, 4217, 7002, 7009, 7019, 4R15, 4R16, 4S15, 7S25, 7S26, 7S35, 7S36, 7S55 To initially start your watch, swing it from side to side in a horizontal arc for about 30 seconds. Cal. 4206, 4207, 4217, 4S15 These watches can also be started by winding the crown. Note: If the watch is worn daily, SEIKOs automatic mechanism will wind the mainspring automatically through normal wrist movements.
When setting the minute hand of a quartz watch, advance it to a few minutes ahead of the time and then turn it back to the exact time.
TIME/CALENDAR SETTING FOR MODELS WITH CALENDAR
The date will change gradually between 9:00 P.M. and 4:00 A.M. (See note 1 on calendar setting.) For some models, however, it will change instantly when the hands pass the 12 oclock marker at midnight. For models with date calendar
HOW TO USE THE WATCH
Set the time/calendar following the instruction pertaining to your watch type.
1. 2. 3.
Pull out the crown to the first click. Turn the crown until the previous days date appears in the calendar frame. Pull out the crown to the second click, and advance the hour and minute hands until the desired date appears.
* If your watch has three hands, pull out the crown when the second hand is pointing to 12 oclock.
TIME SETTING FOR MODELS WITHOUT CALENDAR
1. 2. 3. 6
Pull out the crown all the way.
Adjust the time by turning the crown in the desired direction. Push the crown back in to the normal position.
* If your watch has three hands, push the crown back in to the normal position in accordance with a time signal for 00 seconds.
For models with day and date calendar
Pull out the crown to the first click. Turn the crown until the previous days date appears in the calendar frame. Turn the crown in the opposite direction until the desired language (bilingual) for the day before the desired day appears in the calendar frame.
* For Cal. 7009 and 7019, push the crown back in to the normal position and then push it repeatedly to set the day.
When setting the hour hand, check that AM/PM is correctly set. The watch is so designed that the calendar changes once every 24 hours. Turn the hands past the 12 oclock marker to determine whether the time is set for the A.M. or P.M. period. If the calendar changes, the time is set for the A.M. period. If it does not change, the time is set for the P.M. period.
CHANGING BATTERY IN ANALOGUE QUARTZ WATCH
Because the battery is inserted at the factory to check the function and performance of the watch, its actual service life once in your possession may be less than the specified period. When the battery expires, make sure to replace it as soon as possible to prevent any malfunction. For battery replacement, we recommend that you contact an AUTHORIZED SEIKO DEALER and request they only use a genuine SEIKO battery. Battery life indicator If your analogue quartz watch has a second hand, the battery needs to be replaced when you see the second hand moving in two-second increments instead of the normal one-second increments. (Some calibres do not have this function.) The watch will, however, remain accurate while the second hand is moving in two-second increments.
Pull out the crown to the second click, and advance the hour and minute hands until the desired date and day appears.
Notes on calendar setting:
1 Do not change the calendar between 9:00 P.M. and 4:00 A.M, as it may not change properly. If it is necessary to set the calendar during that time period, first change the time to any time outside those hours, set the calendar and then reset the correct time. When the day shifts automatically to the next day, the other language will temporarily appear.
LOSS/GAIN OF THE ANALOGUE QUARTZ WATCH
Loss/gain (monthly rate) is less than 15 seconds (20 seconds for some calibres) in the normal temperature range (5C ~ 35C or 41F ~ 95F). 9
TO PRESERVE THE QUALITY OF YOUR WATCH
Non-water resistance If WATER RESISTANT is not inscribed on the case back, your watch is not water resistant, and care should be taken not to get it wet as water may damage the movement. If the watch becomes wet, we suggest that you have it checked by an AUTHORIZED SEIKO DEALER or SERVICE CENTER. Water resistance (3 bar) If WATER RESISTANT is inscribed on the case back, your watch is designed and manufactured to withstand up to 3 bar, such as accidental contact with splashes of water or rain, but it is not designed for wearing while swimming or diving. 10 Water resistance (5 bar)* If WATER RESISTANT 5 BAR is inscribed on the case back, your 5 bar WR watch is designed and manufactured to withstand up to 5 bar and is suitable for wearing while swimming, yachting and taking a shower. Water resistance (10 bar/15 bar/20 bar)* If WATER RESISTANT 10 BAR, 10/15/20 bar WR WATER RESISTANT 15 BAR or WATER RESISTANT 20 BAR is inscribed on the case back, your watch is designed and manufactured to withstand up to 10 bar/15 bar/20 bar, respectively, and is suitable for wearing while taking a bath or shallow diving, but not for scuba diving. We recommend that you wear a SEIKO Divers watch while scuba diving.
* Before using a water resistant 5, 10, 15 or 20 bar watch in water, make sure the crown is pushed in completely. Do not operate the crown when the watch is wet or in water. If used in sea water, rinse the watch in fresh water and dry it completely. * When taking a shower while wearing a water resistant 5 bar watch, or taking a bath while wearing a water resistant 10, 15 or 20 bar watch, make sure to observe the following: Do not operate the crown when the watch is wet with soapy water or shampoo. If the watch is left in warm water, a slight time loss or gain may be caused. This condition, however, will be corrected when the watch returns to normal temperature. NOTE: Pressure in bar is a test pressure and should not be considered as corresponding to an actual diving depth since swimming movements tend to increase the pressure at a given depth. Care should also be taken when wearing and diving into water.
[for analogue quartz watches only] Your watch works with stable -10C accuracy in a temperature range of 5C and 35C (41F and 95F). Temperatures over 60C or 140F (50C or 122F for some calibres) may cause battery leakage or shorten the battery life. Do not leave your watch in very low temperatures below 10C or +14F (-5C or +23F for some calibres) for a long time since the cold may cause a slight time loss or gain. However, the above conditions will be corrected when the watch returns to normal temperature.
SHOCKS & VIBRATION
General light activities will not affect your watch, but be careful not to drop your watch or hit it against hard surfaces, as this may cause damage. 11
The watch will be adversely affected by strong magnetism. Keep the watch away from close contact with magnetic S N objects. (In the case of a quartz watch, normal accuracy will return if the watch is moved away from the magnetic field.)
Be careful not to expose the watch to solvents (e.g., alcohol and gasoline), mercury (e.g., from a broken thermometer), cosmetic sprays, detergents, adhesives or paints, as the case, bracelet, etc. may become discolored, deteriorate or damaged.
It is recommended that the watch be checked once every 2 to 3 years. Have your watch checked by an AUTHORIZED SEIKO DEALER or SERVICE CENTER to ensure that the case, crown, gasket and crystal seal remain intact.
PRECAUTION REGARDING CASE BACK PROTECTIVE FILM
If your watch has a protective film and/or a sticker on the case back, make sure to peel them off before using your watch. Otherwise, perspiration getting under them may rust the case back.
CARE OF CASE AND BRACELET
To prevent possible rusting of the case and bracelet caused by dust, moisture and perspiration, wipe them periodically with a soft dry cloth.
DCR-TRV60 12-125 MX 700WX BE 710 BD316 Control GT-10 Omniswitch 6600 MP9000 Darbuka DVB-T 3 5 X-A50 KX-FL611 BC 350A Mcbr460S KX-TG2237S 2 00 X642E MFP ZKT621LX GL350SB LN-R238W FE802 DHR-7105 802 11B Pc 1201 Watch NV-GS27E SR-S583DW St560 Salesforce Roomba 510 Mypal A686 DA-302 DVD-R580 Rebel XT Inmotion IM3 4900 Zoom BD-P1600A Workstations Mp4 Eddition Color 880 R-770B 285 W HD6161 DMC-FZ10 SF-371P DSC-T90 L Aspire 5332 Creative Xmod AWF1000 522 M 1000 R Aficio 1515 GR-L247NI Virus KC Laserline 291 WEP180 DAV-DZ380W QR2210W MD-MS721H SL400R PC170 KP-44PX2 QD96 W EWF10470W HS26W-WH Movie IC-F34GS UR5U-8500L WG5200R FM37 4G XM-222 Beolab 11 KX-TG2770S LE37B554 20LS5RC B4250 WD-D52SP Fromages T240MD Blade 96640 Palm Iiic MC-9287UR NS-777-NS-555 TY-WK103pv9 SC-7060 Center 2 DSC-T7 Ist DS SD1 SC162VS SRM5100 10 PDP2060 4046-6 KG HDR-UX9E 107Y-S DZO-V58 Sibelius TY-ST42pa20
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101