This tool does the job!

Hilti DX 460 powder-actuated fastening tool
Fully automatic, powder-actuated tool for extremely quick and convenient fastening
Hilti DX 460: Fast, reliable and easy to use

What you can count on.

s Reliability
The optimised tool concept and a completely new magazine design ensure a long life expectancy, even when making serial fastenings.

s User-friendliness

Work can be carried out conveniently, even over long periods, thanks to the ergonomic design and the padded grip.

s Speed

A durable magazine combined with the automatic piston return system assures you of even more fastenings in even less time without any manual cycling of the tool.

s Safety

Hilti's well-proven piston principle and a whole range of other safety devices ensure user safety.

s Versatility

You can make repetitive fastenings to steel, concrete and sandstone quickly and conveniently. In the DX460 fastening tool, Hilti has united decades of experience and customers' need. The result is a new, fully automatic, powder-actuated tool with nail magazine. The Hilti DX460 combines a high level of userfriendliness with extreme reliability.
No matter whether you fasten to concrete, steel or sandstone, the power regulation of the Hilti DX460 and various cartridge power levels permit a constant fastening quality to be obtained.
Technical data: Weight: Tool length: Magazine capacity: Cartridges:
7.78 lb (3.53 kg) incl. magazine 18.03 (460 mm) nails in magazine strips of 10, lengths 1/227/8 (1472 mm) 6.8/11 M, in magazine strips of 10, 4 power levels (green, yellow, red, black)
Formwork and general fastening work
Your task: Position formwork, secure supports, install barriers and affix signs. The Hilti solution: Magazined nails to make serial fastenings to concrete using the Hilti DX460 and MX72 magazine: s X-DNI, X-ZF: nails with differing application profile for a wide variety of fastenings. s X-SL: easily removable formwork nail for temporary fastenings. s X-FS: the ideal fastener to position formwork.

Insulation and sealing

Fastening of steel building components
Your task: Fastening insulation panels and foils / sheeting, lines for grouting / injection material or vapour barriers. The Hilti solution: Quick and reliable serial fastenings using washer or combifasteners and magazined nails: s X-IE: for fastening various insulating materials to concrete and plastered masonry. s X-SW: flexible washer fasteners to fasten insulating foils / sheeting to concrete and steel. s Washers for Hilti nails: simple securing of joint seals, foils / sheeting and timber to concrete and steel using the new washer holder.
Your task: Installing masonry ties, making temporary fastenings to steel, nailing drywall tracks, etc. The Hilti solution: s X-EDNI: magazined standard nails for efficient fastening to steel. s X-CR: stainless-steel nails for fastenings in damp or corrosive surroundings. s X-AL-H: high-strength nails for fastening to steel and concrete of higher strength.

Robust and reliable

The new Hilti MX72 magazine for hard use on building sites by professional workers who have to rely on their tools. For everyone who simply wants to make quicker serial fastenings with nails 1/227/8 (1472 mm) long.

Unbelievably versatile

The Hilti DX460: the tool for many different fastenings in building construction and civil engineering, with well-conceived solutions for the insulation trade and for fastening to a wide variety of materials.

Really simple

The Hilti DX460 can be easily taken apart and reassembled without the use of any tools. The new tool design reduces maintenance work to a minimum.
DX 460 programme DX460 MX72 powder-actuated tool with magazine
Ordering designation Item no.
DX 460 MX72 powder-actuated tool with magazine MX 72 000000/0 Supplied in an impact-resistant plastic toolbox, cleaning set, spare buffer, ear protectors, safety goggles, Hilti lubricant spray and operating instruction.
DX460 powder-actuated tool

DX 460 powder-actuated tool 000000/0 Supplied in an impact-resistant plastic toolbox, cleaning set, spare buffer, ear protectors, safety goggles, Hilti lubricant spray and operating instruction.
Cartridges (strips of 10)
Power Package contents Ordering designation Item no.
Light Medium Heavy Extra-heavy

1000 1000

6.8/11 M green 6.8/11 M yellow 6.8/11 M red 6.8/11 M black
000000/0 000000/0 000000/0 000000/0

X-460-F8

Accessories DX460
Description Ordering designation Item no.

X-460-F8N15

Magazine for magazined nails up to 72 mm Fastener guide Standard for improved accessibility, 15 mm narrow for improved accessibility, 10 mm narrow for fasteners with a 12 mm steel washer with stop spall for fastening 6 and 8 mm threaded studs for 10 mm threaded studs and nails with stop spall for fastening 10 mm threaded studs for fastening X-IE insulation fasteners Piston Standard, for X-DNI, X-EDNI, X-ZF, X-FS, X-CR X-DAK nails, 6 and 8 mm threaded studs for X-AL-H nails when overdriving nails into wood is desired for 10 mm threaded studs and nails for X-IE insulation fasteners for X-IE insulation fasteners with approval Stabilizer assists perpendicular tool position Washer holder for fastening 23/36 mm steel washers with magazine Pole Tool Extension 5 ft (1.5 m) Extension 7 ft (2.1 m) Receptacle Cleaning Kit 3 brushes, ramrod, scraper, cleaning cloth

370844/3

MX72 X-460-F8N10
X-460-F8 X-460-F8N15 X-460-F8N10 X-460-F8S12 X-460-F8SS X-460-F10 X-460-F10SS X-460-FIE
373313/6 373314/4 373315/1 373317/7 373318/5 373319/3 373320/1 373321/9

X-460-F8S12

X-460-F10

X-460-F10SS

X-460-F8SS
X-460-P8 X-460-P8AL X-460-P8W X-460-P10 X-460-PIE X-460-PIEA

373297/1

X-460-FIE
373299/7 373298/9 373300/3 373301/1 373302/9

X-460-P8

X-460-P8AL

X-460-P8W

X-460-STAB

373322/7

X-460-PIE

X-460-WH23/36

373331/8

X-PT ft X-PT ft X-PT 460

370830/2 371661/0 371663/6

X-460-Clean

372810/2
Hilti Corporation FL-9494 Schaan Principality of Liechtenstein www.hilti.com
Hilti = registered trademark of Hilti Corp., Schaan
1 Printed in Liechtenstein 2002
Right of technical and programme changes reserved

S. E. & O.

Fastening solutions for building construction
Fast, safe and economical.
Hilti. Outperform. Outlast.
Professional formwork. Fast and economical.
X-SL forming nail Temporary fastening of timber to concrete Pre-determined breaking points to ensure clean break, eliminating the risk of injury from protruding nails Fast and easy timber removal due to small nail head diameter Reuse of timber possible Convenient fastenings of timber to concrete for temporary applications: Hilti X-SL. X-FS forming spacer Fastening hardly visible after removal of shutters Polyethylene material does not rust or rot Very flexible for virtually every wall thickness
Top flexibility for positioning of formwork for different wall thicknesses.
No matter what fastening. With Hilti you choose right.
X-SW soft washer fastener Fastening soft materials up to a total of 20 mm thickness, e. g. drainage foil, hard plastic sheeting, soft rubber material, plastic fibre or membrane, etc. Soft materials pulled down tightly without tearing Soft material - professionally fastened within seconds. X-U: the new general purpose nail For steel and hard concrete Highly resistant to buckling Outstanding holding values on steel thanks to the unique, fully knurled tip Use for permanent fastenings of wood, metal or other material Fastenings to concrete or steel with the brand new Hilti X-U nails youre always right. X-IE insulation fastener Fastening insulation materials up to 140 mm thickness, e. g. styrofoam, mineral wool / fibreglass, cork, cementitious woodwool, etc. Surface pattern on disc provides a good key for plaster adhesion Speedy and cost efficient fastening of insulation material: Hilti DX 460 and X-IE fasteners.

Fastening elements

Ordering designation Item no.
Forming nail X-SL MX, collated, available lengths mm Forming nail X-SL DP, single, available lengths mm General purpose nail X-U MX, collated, available lengths mm General purpose nail X-U, single, available lengths mm Forming stop X-FS MX, for use with MX nails Forming stop X-FS ZF52 Soft washer X-SW, for use with MX nails, 30 or 60 mm Soft washer X-SW ZF37, 30 or 60 mm Insulation element X-IE, 60 or 90 mm Steel washer R23, 23 mm; R36, 36 mm

000000 000000

Hilti = registered trademark of Hilti Corp., Schaan | W 00-en | 1 Printed in Liechtenstein | 2007 | Right of technical and programme changes reserved S. E. & O.
Special cartridges, cal. 6,8/11 M
Cartridges 6.8/11 M green, light (VP 100) Cartridges 6.8/11 M yellow, medium (VP 100) Cartridges 6.8/11 M red, strong (VP 100) 000000
Setting tools and accessories
Powder actuated fastening tool DX 460-MX Powder actuated fastening tool DX 460-F8 Standard fastener guide X-460-F8 Nail magazine MX 72 X-460-WH23/36 washer holder X-460-P8 standard piston X-460-P8W wood piston X-460-FIE-L insulation fastener guide X-460-PIE-L insulation piston 373813

Productivity plus

Rotating lasers for easy, accurate leveling and alignment in all planes
Injection mortars for versatile, secure fastenings in concrete
Powerful combihammers for tough drilling and chiseling jobs
Cordless circular saws for extremely high productivity in a wide range of applications
Hilti Corporation I 9494 Schaan I Liechtenstein I P +423-I F +423-I www.hilti.com