BEFORE YOU BEGIN

Before using this product, read the Important Safety and Legal Information pamphlet and follow its instructions.

Your Headset's Battery

CHARGE

START BLUETOOTH FEATURE

Your Headset
HS850 Bluetooth Handsfree Headset
Get Connected in 4 Quick Steps
1 - CHARGE 2 - START BLUETOOTH FEATURE 3 - PAIR 4 - TEST AND USE
For help, contact us at 1- 877-MOTOBLU or visit us at www.hellomoto.com
Take a moment before you get started to familiarize yourself with your new HS850 Headset. Release tab down Boom
Your Phone Your phone's Bluetooth feature is off by default. To use your headset, you must turn on the Bluetooth feature in your phone. For most Motorola phones: (Menu 1 Press M( ) > Settings > Connection >
Before you can use your headset, you must pair (link) it with your phone. Step A - PUT THE HEADSET IN PAIRING MODE
1 Plug the Motorola charger into the end of
the headset with the release tab facing down. The indicator light turns on when the battery is charging. It may take up to 1 minute for the indicator light to turn on. When the headset's battery is fully charged (about 2 hours), the indicator light turns off.
Bluetooth Link > Setup.
1 Ensure the headset is turned off (indicator
light not blinking and boom is closed).
2 Scroll to Power. 3 Select Change. 4 Scroll to On. 5 Press Select to turn on the Bluetooth
feature. The Bluetooth feature remains on until you turn the feature off.
2 Press and hold the Call E button. After about
4 or 5 seconds, the indicator light becomes steadily lit.

Volume Buttons

Call Button Indicator Light
3 Release the Call E button and immediately
open the headset boom. The indicator light remains steadily lit. If the indicator light is flashing or not steadily lit when opening the headset boom, repeat steps 1 through 3 on this page.
2 Disconnect the charger.
Note: Headset is not functional while charging.
Note: These steps are for most Motorola phones. For other phones, see your phone's user's guide.
Motorola, Inc. Consumer Advocacy Office 1307 East Algonquin Road Schaumburg, IL 60196 USA www.hellomoto.com 1-877-MOTOBLU 1-800-331-6456 (United States) 1-888-390-6456 (TTY/TDD United States for hearing impaired) 1-800-461-4575 (Canada) Guide Number: 6809492A69-A

PAIR CONTINUED

Your Phone

TEST AND USE

QUICK TIPS
To turn on the headset, open the headset boom. The indicator light blinks when the power is on. To answer or end a call, press the Call E button on the headset. To adjust the volume, press the Volume buttons on the headset. NOTE: To set volume button orientation for right or left ear, with the boom closed, first press and hold the Call E button until the indicator light is lit. Then press the Volume button to be used to increase volume. The indicator light flashes to indicate success. To turn off the headset, close the headset boom. The indicator light will stop flashing.

TROUBLESHOOTING

My phone doesn't find my headset. Make sure the indicator light on your headset is on and steady when your phone is searching for devices (see step 3). My headset worked before but now it's not working. Make sure your phone is on and the Bluetooth feature is turned on in your phone (see step 2). If the Bluetooth feature was turned off or was turned on only temporarily, you may need to restart the Bluetooth feature (see step 2) and pair your phone and headset again (see step 3). Support. If you need more help, contact us at 1- 877-MOTOBLU. FOR DETAILS ABOUT YOUR HANDSFREE DEVICE See the users guide or visit us at www.hellomoto.com/bluetooth and click Support.
Step B - SET YOUR PHONE TO LOOK FOR YOUR HEADSET For most Motorola phones: (Menu 1 On your Motorola phone, press M( ) >
Your phone and headset are now paired and ready to make and receive calls. To make a call:
1 With the boom open, place the headset

over your ear.

Settings > Connection > Bluetooth Link > Handsfree > Look for Devices.
2 On your phone, dial the number you want
to call and press the SEND key.
The phone lists Bluetooth devices it finds.
MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. The use of wireless devices and their accessories may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these products. The Bluetooth trademarks are owned by their proprietor and used by Motorola, Inc. under license. All other product or service names are the property of their respective owners. Motorola, Inc. 2005.

2 Select Motorola HS850. 3 Select OK or Yes to pair/bond your headset

with your phone.

3 If your phone and headset are successfully
After you have successfully paired your phone and headset, you don't need to repeat these steps. For daily use, ensure that your headset is turned ON and that your phone's Bluetooth feature is ON. To save battery power, turn OFF the headset when you don't use it for an extended time.
paired, you will hear ringing on the headset.
4 Enter the passkey: Select OK.
When your headset successfully pairs with your phone, the indicator light changes from steadily lit to flashing.