Before using your headset

Check the accessories

Make sure you have the following items with your headset:

Set 1:

Charge your headset
Charge the headset's battery fully before using the headset for the first time.
3 Plug the travel adapter into the electrical outlet.
For Set 1, use the travel adapter provided. Charge the headset until the red light on the headset turns to blue. The headset will be fully charged in approximately 2 hours.

Quick Start Guide

Bluetooth Mono Headset
Thank you for purchasing the Samsung Bluetooth Mono Headset WEP200, we hope you will be delighted with its operation. Take a moment before you get started to familiarize yourself with your new headset.
1 Put the headset in the supplied charging case

and close the cover.

WEP200
Get connected in 4 quick steps Charge your headset Put your headset in pairing mode Turn on Bluetooth on your phone and pair with headset Test and use

Multi-Function button

Charging case, Travel adapter, Manual, 2 headset hooks

Set 2:

4 Remove the travel adapter from the case.
NOTE: The headset cannot be used while charging.
Hook Volume control buttons
Indicator light Microphone Charging contact
Charging case, Manual, 2 headset hooks For Set 2, use your phone charger as a power source for recharging.
NOTE: Your headset supports the headset and/or hands-free profile(s).
2 Plug the travel adapter into the case's

charging socket.

Start here
Put your headset in pairing mode
Before you can use your headset, you must pair it with your phone.
Headquarters: 1301 East Lookout Drive Suite 150 Richardson, TX 75082 Internet Address: http://www.samsungmobileusa.com/ accessories Customer Care Center: 1-888-987-4357
Turn on Bluetooth on your phone and pair with headset
1 Set your Bluetooth phone to discover the
headset by following your phone's guide. Typically, the steps involve going to the Settings, Connection, or Bluetooth menu on your phone and then selecting the option to discover Bluetooth devices. Your phone will find the Samsung WEP200 headset.

Test and use

Your phone and headset are now paired and ready to make and receive calls. To confirm they are operating properly, make a call:

Using your WEP200

1 Ensure that the headset is off (see Turn
headset on/off on the reverse side of this guide).
1 Place the headset over your ear.
See Wearing the headset on the reverse side of this guide.
2 Press and hold the Multi-Function button until
the indicator light turns on in blue (approximately 8 seconds).
2 On your phone, make a call to the number

you want.

3 If your phone and headset are successfully
paired, you will hear ringing on the headset. After you have successfully paired your phone and headset, you do not need to repeat these initial setup steps each time you use the headset.
See Features and Functions Guide on the reverse side of this guide for information on using your WEP200.
2 Select Samsung WEP200. 3 When the phone asks if you want to pair with it,
confirm by selecting Yes or OK.
The indicator light flashes in blue as you press and hold the Multi-Function button. Continue holding down the button until the blue light is steadily lit.
4 Enter the headset passkey or PIN, 0000.
Guide No.: GH68-11254A 08/2006. Rev. 1.2
Features and Functions Guide
SAMSUNG Bluetooth Mono Headset

Turn headset on/off

To turn the headset on, Press and hold the Multi-Function button for 4 seconds until you see 4 blue flashes on the indicator light, then release. You will hear a tone and see the indicator light flashes while the power is on (see Meaning of the indicator light of this guide). To turn the headset off, Press and hold the Multi-Function button for 4 seconds until you see 2 blue flashes on the indicator light, then release. You will hear series of 2 tones and see the indicator light stops flashing.

Wear the headset

Wear the headset on your ear. In general, you will get better performance when there are no obstructions (including parts of your body) between the headset and the phone.

Change for use on other ear

Troubleshooting

Depending on which ear you are going to wear the headset, simply adjust the hook accordingly. My phone does not find my headset. Make sure the blue indicator light on your headset turns on when your phone is searching for devices. My headsest worked before but now it is not working. Make sure your phone is on and the Bluetooth feature is turned on in your phone. If the Bluetooth feature has been turnned off or was turned on only temporarily, you may need to restart the Bluetooth feature. If you have confirmed the Bluetooth feature is on in your phone, pair your phone and headset again.

Important:

Be sure to first follow the Quick Start Guide on the reverse side of this guide to complete initial setup of your headset.

Adjust the volume

Press [ ] on the side of the headset to increase the volume level and press [ ] to decrease the volume level.

Make calls

Making a voice activated call
If the phones voice recognition feature is on, you can make a voice activated call. Press the Multi-Function button once. You will hear the voice-activation tone. Say the name of the person you wish to call. Depending on your phone, this feature may not be supported.
2 Press and hold the Multi-Function button to access the
recent call list. 3 Press and hold the Multi-Function button to make a call to the last number you have dialed or received.

Use enhanced features

Enhanced features are available for phones that support the hands-free Bluetooth profile and enhanced features.
Meaning of the indicator light

Light Tone Status

Answer a second call (switching between 2 calls)

End a call

Press the Multi-Function button once.

Answer a call

After you hear the ring tone, press the Multi-Function button once. If you answer the call with your phone, you can transfer the call to the headset by pressing the Multi-Function button.
When your phone notifies you of another incoming call while you are on a call, press and hold the Multi-Function button for 2 seconds. You can switch between calls by pressing and holding it for 2 seconds. Depending on your phone, this feature may not be supported.

Flashes in blue every 8 seconds.
Quick series of 2 tones. (Active mode starts.) Quick series of 2 tones. (Standby mode starts.)
The headset is in Active mode. The headset has an active call in progress. You can talk up to 4 hours. The headset is in Standby mode. The headset is waiting for a call. The headset can be in Standby mode up to 70 hours.* The battery of the headset is low. Recharge the battery. There is only 1 minute of talk time left.
Flashes in blue every 3 seconds.
Redialing the last number
If the phones voice recognition feature is off, press and hold the Multi-Function button for 2 seconds, twice. If the phones voice recognition feature is on,

Place a call on hold

While you are on a call, press and hold the Multi-Function button for 2 seconds. To retrieve the call, press and hold the Multi-Function button for 2 seconds again. Depending on your phone, this feature may not be supported.

Reject a call

When you receive a call, press and hold the Multi-Function button for 2 seconds to reject the call. Depending on your phone's setting or type, you may only be able to mute the ringer or this feature may not be supported.
1 Press the Multi-Function button and listen for the
voice-activation tone. When you hear it, press the button again to cancel the feature.
Flashes in red instead of blue.
5 tones every 20 seconds.
Switch off the microphone
Press and hold the Up volume control button to switch off the headset's microphone. To switch it back on, press and hold the button again.
*Depending on the phone type and usage, the actual time

may vary.

mail-in rebate

WEP210

WEP200
Purchase a Samsung WEP200 or WEP210 Bluetooth headset between April 1, 2009 and May 31, 2009 and receive a $10 rebate by mail.

Mail-in Rebate Checklist

Please remember to include all of the following: 1. Completed downloadable rebate form. Copies or duplications of completed forms will not be accepted. 2. Copy of original store-identified receipt from Amazon.com for qualifying purchase (including WEP200 or WEP210 Bluetooth headset) dated between April 1, 2009 and May 31, 2009, with purchase price circled. 3. Original UPC/bar code and part number label for Samsung WEP200 or WEP210 Bluetooth headset (valid WEP200 part number: AWEP200JBECXAR, valid WEP200 UPC: 635753461572; valid WEP210 part number: AWEP210JCECXAR, valid UPC: 635753470499). Mail to: Samsung WEP200 or WEP210 $10 MIR Dept. 6427 P.O. Box 5009 Stacy, MN 55078-5007 PLEASE PRINT CLEARLY IN CAPITAL LETTERS *Name: *Address:
*City: *E-Mail: Daytime Phone:

*Required fields.

*State:

Terms and Conditions

Offer limited to customers of Amazon.com only. Completed downloaded rebate form from Amazon.com must be included with a copy of original store-identified receipt. Other online retailers downloaded PDF rebate forms do not qualify for this offer. Limit one (1) downloaded rebate form per postmarked envelope submitted. Each qualifying Bluetooth headset must have downloaded rebate form completed for submission. Limit one (1) $10.00 rebate payable per qualifying form submitted. Request must be postmarked within 30 days of purchase date. Purchase date is determined by receipt date of product(s) purchased. Claims postmarked or received after applicable dates and incomplete or illegible submissions will be returned as ineligible. Allow 8 weeks for processing. This offer is not combinable with other Samsung offers. Offer is limited to product on hand and NO substitutions with other products are eligible. Defective product will be replaced. Samsung reserves the right to issue substitute offer products without advance notice. Must send in downloaded mail-in rebate form. Counterfeit copies of form, receipt, or UPC / bar code will be rejected. Keep copies of materials submitted; originals become Samsung property and will not be returned. Samsung reserves the right to request additional information regarding the claim. False information disqualifies this claim, making it subject to review under U.S. Postal Regulations. Violators may be prosecuted. Only purchases made by an end-user customer from Amazon.com in the United States and its territories are valid. Purchases by Samsung resellers and internal Samsung orders are ineligible. Offer void where prohibited, taxed, or restricted by law. You may check the status of your order at http://sg.mycheckstatus.com. If you have any questions regarding this offer, please call the Samsung Awards center at 866-203-7156 from 9 a.m. to 6 p.m. CST, M-F. Limit one (1) $10.00 rebate per Samsung Bluetooth headset purchase. Limit three (3) $10.00 rebates payable per address or household. Thank you for your business.
2008 Samsung Telecommunications America, LLC.