R-2800

List of Chapters
Foreword Preface Acknowledgments Introduction
Pratt & Whitneys Dependable Masterpiece
Chapter 1 Why Radials? Chapter 2 Pratt & Whitney History and Background Chapter 3 R-2800 Development Chapter 4 Variations Chapter 5 Model Types & Specifications Chapter 6 Carburetors Chapter 7 Propellers Chapter 8 Installations Chapter 9 Military Applications Chapter 10 Commercial Applications Chapter 11 Helicopters Chapter 12 Operating, Service Difficulties and Overhaul Chapter 13 Racing Chapter 14 The Future Color Section Index About the Author

S130 SKID-STEER LOADER SPECIFICATIONS

DIMENSIONS

A) Operating Height.. B) Height with Operator Cab. C) Angle of Departure.. D) Ground Clearance.. E) Wheelbase.. F) Length without Attachment.. G) Length with Standard Bucket. H) Rollback @ Carry Position.. I) Dump Height with Standard Bucket. J) Dump Reach @ Maximum Height.. K) Height to Bucket Hinge Pin. L) Dump Angle @ Maximum Height. M) Rollback Fully Raised @ Maximum Height.
143.4" (3812 mm) 77.3" (1963 mm) 23 7.4" (188 mm) 35.5" (900 mm) 95.8" (2432 mm) 124.1" (3152 mm) 25 82.7" (2101 mm) 22.6" (575 mm) 109.5" (2781 mm) 40 96
Carry Position.. 9.1" (231 mm)
N) Width (over bucket) 54" Bucket with offset rims. 54.0" 60" Bucket.. 60.0" 62" Bucket.. 62.0" 0) Turning Radius with Standard Bucket. 68.7" Rear Clearances.. 59.4" P) Wheel Tread 10-16.5.. 48.1" 10-16.5 with offset rims. 42.5" 31.5x13-16.5.. 48.5" Q) Width (over tires) 10-16.5.. 58.7" 10-16.5 with offset rims. 53.8" 31.5x13-16.5.. 59.4"
(1372 mm) (1524 mm) (1575 mm) (1745 mm) (1509 mm) (1222 mm) (1079 mm) (1232 mm) (1490 mm) (1367 mm) (1509 mm)

PERFORMANCE

Rated Operating Capacity (SAE J732)... 1300 lbs. (590 kg) Rated Operating Capacity with Counterweight option.. 1400 lbs. (635 kg) Tipping Load (SAE).... 2634 lbs. (1195 kg) Operating Weight (SAE).... 5235 lbs. (2375 kg) Travel Speed..... 7.3 mph (11,8 km/hr) Lift Breakout Force (SAE)... 2800 lbs. (1270 kg) Tilt Breakout Force (SAE)... 3000 lbs. (1361 kg) Push Force.... 3400 lbs. (1542 kg)
Bobcat S130 Skid-Steer Loader Specifications ENGINE/ELECTRICAL

March 11, 2008

Make/Model... Kubota/V2403-MDI-E3 Fuel/Cooling... Diesel/Liquid Horsepower (SAE Gross).. 49 HP (36 kW) Maximum Governed RPM.. 2700 RPM Torque @ 1650 RPM (SAE Net).. 109.6 ft. lbs. (148,6 Nm) Number of Cylinders.. 4 Displacement.. 148.5 cu. in. (2,4 L) Bore/Stroke.. 3.43 in./4.03 in. (87 mm/102 mm) Fuel Consumption.. 1.8 gph (6,8L/h) Estimated fuel consumption is based on testing by Bobcat Company in high duty cycle digging applications. Lubrication.. Gear Pump Pressure System with Filter Fuel Injection System. Direct Crankcase Ventilation. Closed, breathing Air Cleaner.. Replaceable dry paper cartridge with separate safety element Ignition.. Compression (Diesel) Engine Coolant... Propylene glycol/water mix (53%-47%) with freeze protection to -34F (-37C) Starting Aid.. Glow plugs Alternator.. 90 amps; ventilated Battery.. 12 volt; 600 cold cranking amps @ 0F (-18C); 115 minute reserve capacity @ 25 amps Starter.. 12 volt; gear reduction type; 4.02 HP (3,0 kW)

HYDRAULIC SYSTEM

Pump Type... Engine driven, gear type Pump Capacity.. 16.9 GPM (64 L/min) @ 3135 Pump RPM System Relief @ Quick Couplers. 2650 - 2750 PSI (183 - 190 Bar) Hydraulic Filter.. Full flow replaceable, 3 micron synthetic media element Hydraulic Cylinders.. Double-acting; tilt cylinders have cushioning feature on dump & rollback Control Valve.. 3-Spool, open center type with spring detent on lift, electric solenoid valves for auxiliary spool Fluid Type.. Bobcat Hydraulic/Hydrostatic Fluid (P/N 6563328) Motor oil is not an acceptable alternative fluid. Bore Diameter Lift Cylinder (2).. 2.00 in. (50,8 mm) Tilt Cylinder (1).. 3.50 in. (88,9 mm) Rod Diameter Lift Cylinder (2).. 1.25 in. (31,8 mm) Tilt Cylinder (1).. 1.50 in. (38,1 mm) Stroke Lift Cylinder (2).. 26.57 in. (674,9 mm) Tilt Cylinder (1).. 14.50 in. (368,3 mm) Hydraulic Function Times Raise Lift Arms.. 2.7 Seconds Bucket Dump. 2.2 Seconds Lower Lift Arms.. 1.8 Seconds Bucket Rollback. 1.9 Seconds
Bobcat S130 Skid-Steer Loader Specifications DRIVE SYSTEM
Main Drive.. Fully hydrostatic, 4-wheel drive Transmission. Infinitely variable tandem hydrostatic piston pumps, driving two fully reversing hydrostatic motors Final Drive Chains.. Pre-stressed #80 HSOC endless roller chain (no master link) and sprockets in sealed chaincase with oil lubrication. Chains do not require periodic adjustments. Two chains per side with no idler sprocket Axle Size. 2.0 in. (50,8 mm) heat treated Wheel Bolts. (8) 9/16 in. wheel bolts fixed to axle hubs

CAPACITIES

Fuel Tank. 13.3 gals. (50,4 L) Cooling System without Heater.. 9.8 qts. (9,18 L) Engine Oil with Filter. 9.5 qts. (9,0 L) Hydraulic Reservoir.. 14 qts. (13,2 L) Hydraulic/Hydrostatic System. 6 gals. (22,0 L) Chaincase Reservoir. 8 gals. (30,0 L)

CONTROLS

Vehicle Steering.. Loader Hydraulics Lift & Tilt.. Front Auxiliary (Std.). Rear Auxiliary (Opt.). Auxiliary Pressure Release. Engine.. Starting Aid.. Service Brake. Direction and speed controlled by two hand levers
Controlled by separate foot pedals or optional Advanced Control System (ACS) Controlled by electrical switch on Right Hand steering lever Controlled by electrical switch on Left Hand steering lever Pressure is relieved through the coupler block, push in and hold for five seconds Hand lever throttle; key-type starter switch and shutdown Glow Plugs automatically activated by Standard or Deluxe Instrument Panel Two independent hydrostatic systems controlled by two hand operated steering levers Secondary Brake. One of the hydrostatic transmissions Parking Brake.. Mechanical disk, hand operated rocker switch on dash panel

SERVICEABILITY

Access is available to the following through the rear door/tailgate and rear screen Air cleaner Alternator Battery Cooling system (radiator and hydraulic oil cooler) for cleaning Engine oil and fuel filters Engine oil drain and dipstick Starter Axle hubs provide protection for the axle seals Bobtach pivots have replaceable wear bushings Easy access to all lift arm grease points Rod end of the tilt cylinder has a replaceable bushing Tailgate has an optional lock for vandal proofing Tailgate is equipped with door stop to hold door open while servicing Tip-up operator cab gives access to certain hydraulic system components
Bobcat S130 Skid-Steer Loader Specifications INSTRUMENTATION
The following loader functions are monitored by a combination of gauges and warning lights in the operators line of sight. The system shall alert the operator of monitored loader malfunctions by way of an audible alarm and visual warning lights.
Standard Instrument Panel
Gauges Engine Coolant Temperature Fuel Hourmeter Indicators Attachment Control Device BICS Functions Glow Plugs Warning Lights Advanced Control System (ACS) Engine Air Filter Engine Coolant Temperature Engine Oil Pressure General Warning Hydraulic Filter Hydraulic Oil Temperature Hydrostatic Charge Pressure Seat Belt System Voltage

Deluxe Instrument Panel (Option)
Same gauges, warning lights and other features as Standard Instrument Panel plus: Bar-type gauges.. Engine Oil Pressure, System Voltage, Hydrostatic Charge Pressure and Hydraulic Oil Temperature Additional features.. Keyless Start with password capability, Digital Clock, Job Clock, Attachments Information, Digital Tachometer, Multi-Language Display, Help Screens, Diagnostic Capability & Engine/Hydraulic Systems Shutdown Function

ATTACHMENTS

Angle Broom* Auger Backhoe Brush Saw Brushcat Rotary Cutter Buckets Bucket Adapter Chipper* Combination Bucket Concrete Mixer* Digger Dozer Blade Dumping Hopper Grapple, Farm/Utility Grapple, Industrial Grader* Hydraulic Breaker Landplane Landscape Rake Mower Pallet Fork - Standard Pallet Fork - Hydraulic Planer Rear Stabilizer Scarifier Seeder Snow Blade Snow V-Blade* Snowblower* Sod Layer Soil Conditioner* Spreader Super Scraper Sweeper Three-Point Hitch Tiller Tilt-Tatch Tracks, Steel Trench Compactor Trencher Utility Forks Utility Frame Vibratory Roller Water Kit Whisker Broom
See Bobcat Product Price List for specific attachment model availability. *Requires Attachment Control Kit
Bobcat S130 Skid-Steer Loader Specifications FACTORY OPTIONS
Advanced Control System (ACS) Selectable Joystick Control (SJC) Back-up Alarm and Horn Engine Block Heater Hydraulic Bucket Positioning

DEALER ACCESSORIES

Attachment Control Kit Back-up Alarm Cab Accessory Harness Cab Enclosure Catalytic Exhaust Purifier Fire Extinguisher Kit FOPS Kit - Level II** Four-point Lift Kit Four-Way Flasher Light Kit Horn Hydraulic Bucket Positioning Locking Fuel Cap Power Bob-Tach Radio Rear Auxiliary Hydraulics Ride Control Rotating Beacon Light Side Windows Kit Single-point Lift Kit Special Applications Kit Strobe Light Kit Tailgate Lock Kit

HEATED CAB PACKAGES

H71 Option Package Cab Enclosure with Heat Power Bobtach Sound Reduction Suspension Seat Deluxe Instrumentation Panel Cab Accessory Harness Attachment Control Kit H51 Option Package Cab Enclosure with Heat Power Bobtach Suspension Seat Cab Accessory Harness H31 Option Package Cab Enclosure with Heat Suspension Seat Cab Accessory Harness

OPEN CAB PACKAGES

O71 Option Package Power Bobtach Suspension Seat Deluxe Instrumentation Panel Cab Accessory Harness Attachment Control Kit O51 Option Package Suspension Seat Cab Accessory Harness Deluxe Instrumentation Panel O31 Option Package Suspension Seat Cab Accessory Harness

Bobcat S130 Skid-Steer Loader Specifications SAFETY
Bobcat Interlock Control System (BICS) (Std.).. Requires the operator to be seated in the loader with the seat bar in place and the engine running. After the operator presses the Press to Operate Loader button, the loaders hydraulic lift and tilt functions and traction drive system can be operated. Lift Arm Bypass Control (Std.). Used to lower the lift arms in the event that the lift arms cannot be lowered during normal operating conditions. Seat Belt (Std.).. Should always be worn when operating the loader. Seat Bar (Std.).. Secondary operator restraint, also serves as an arm rest. Operator Cab (Std.).. An enclosable operator cab with side screens with a minimal inside cab width of 33" (838 mm) as standard equipment. Meets SAE J1040 and ISO 3471 for Roll Over Protective Structure (ROPS) and SAE J1043 and ISO 3449 Level I for Falling Object Protective Structure (FOPS). Level II option is available.
Level I Acceptance is intended for protection from falling bricks, small concrete blocks and hand tools encountered in operations such as highway maintenance, landscaping and other construction site services. Level II Acceptance is intended for protection from falling trees or rocks for machines involved in site clearing, overhead demolition or forestry.
Lift Arm Support (Std.).. Use for servicing when lift arms are raised Parking Brake (Std.). Always set brake when leaving loader Grab Handles (Std.). Should always be used when entering/exiting loader Safety Tread (Std.).. Slip resistant tread on lift arms and main frame to be used when entering/exiting loader Attachment Steps (Std.).. Should always be used when entering/exiting loader Rear Window (Std.).. For emergency exit Front & Rear Working Lights (Std.). Use for indoor and low light operation Backup Alarm (Opt.).. For use in jobs with low visibility Lift Kits (Opt.)... Lift kits are available so loader may be lifted into remote areas Special Applications Kit (Opt.).. Restricts objects and material from entering cab openings Operators Handbook (Std.). Weather resistant operator handbook written in English will be attached to inside of cab, providing operational instructions and warnings by decals with pictorials and international symbols plus some messages in four basic languages: English, French, German and Spanish.

TRAINING RESOURCES

These optional videotapes and training courses are available through Bobcat Parts Bobcat Skid-Steer Loader Operator Training Course
4-hour course provides video, classroom and hands-on training (also available in Spanish)
Bobcat Skid-Steer Loader Service Safety Training Course
2-hour course provides video, classroom and hands-on training
Bobcat Skid-Steer Loader Safety Video
Short and to-the-point video provides basic safety instructions for the Skid-Steer Loader