Zyxel P-660HW-D1 Web Configuration
1. Open http://192.168.1.1/ into browser and it will prompt for password
2. By default its having password as user, if you simply press login then you will get below screen in that you dont have configuration access, only you can view the status.
3. So for going for configuration mode, at login window give the password as 1234 and clink on Login button 4. Now you will get Change password screen to change default (1234) password 5. Press Ignore to go for configuration Page.
Caution: Please record your new password whenever you change it. The system will lock you out if you have forgotten your password.
6. Select Go to Advanced setup option and click Apply
7. Under Device Information check for WAN in formation, there you can find WAN ip allotted. If WAN IP is not allotted then in left side menu click on Network >> WAN
PPPOE Configuration 1. Assign any profile name in Name field. 2. Select Mode as Routing 3. Select encapsulation as PPPOE 4. Enter DSL User Id (XXX@airtelbroadband.in) and Password 5. Give any Service Name 6. Multiplexing select as LLC 7. Make VPI=1, VCI=32. 8. Select obtain IP Address Automatically. 9. Select Nailed-Up Connection. 10. Now click Apply to Save the settings
11. After saving configuration you will get following message in Message window
Configuration updated successfully
Static IP (NAT Mode) Configuration 1. 2. 3. 4. 5. 6. 7. Assign any profile name in Name field. Select Mode as Routing Select encapsulation as RFC1483 Multiplexing select as LLC Make VPI=1, VCI=32. Assign Static IP Address. Now click Apply to Save the settings
Bridge Mode Configuration 1. 2. 3. 4. 5. 6. Assign any profile name in Name field. Select Mode as Bridge Select encapsulation as RFC1483 Multiplexing select as LLC Make VPI=1, VCI=32. Now click Apply to Save the settings
Changing Default Gateway 1. If customer want to change default gateway from 192.168.1.1to other address then go for Network > LAN > IP. 2. Now assign required new IP and click on Apply
Note: When you change default gateway from 192.168.1.1 to some other series dont forget to change DHCP IP Pool starting Address to that same series
DHCP Configuration 1. For DHCP configuration go to Network > LAN > DHCP Setup 2. For enabling DHCP select DHCP= Server. (For disabling select as None) 3. Assign Size of your Network in Pool size (Max. No of System you want to connect). 4. Assign Primary DNS Server as 125.22.47.125 5. Assign Secondary DNS Server as 202.56.250.5 6. Now Click Apply to Save the configuration, or click Cancel to ignore the changes.
Wireless Configuration 1. 2. 3. 4. 5. 6. Select Network > Wireless LAN > General Select Active Wireless LAN check box. Assign any Network Name (SSID). Select Security Mode as Static WEP. Enter any Passphrase to generate a unique WEP key. Note down this WEP key, so that same key has to be assigned to the PCMCI card of system to connect wireless network 7. Click on Apply to save setting
Port Forwarding 1. Select Network > Advanced > NAT 2. Under General tab select Active Network Address Translation (NAT) 3. Now select SUA Only radio button and click on Apply
4. Now click on Port Forwarding tab. 5. Select Standard predefined service name like WWW, FTP, SMTP, etc 6. If customer want to forward the port, which is not available in list, then click on modify button to enter user-defined ports. 7. Assign the Server IP address to which he want to forward the port 8. Click on Apply to save configuration.
Multiple NAT Configuration 1. Select Network > Advanced > NAT 2. Under General tab select Active Network Address Translation (NAT) 3. Now select Full Feature radio button and click on Apply
4. Click on Address Mapping tab. 5. Click on Modify button to edit Address Mapping rules.
6. Select Type Of rule as Many-to-one, One-to-one, Many-to-server 7. If you are select Many to One, then assign Local Start IP, Local End IP, and Global Start IP. 8. Click on Apply to save the settings.
Diagnostic Test 1. Select Maintenance > Diagnostic > General. 2. In the address field try to ping DNS and then any web site address
Website Security Settings In this router there is option block selective web sites to open. For enabling this option follow these steps. 1. Select Security > Content Filter > Keyword 2. Select Active Keyword Blocking. 3. Enter names of website you want to block like rediff, yahoo, orkut etc into keyword text box and click on Add keyword. 4. It will show list of blocked sites, if you want to unblock any site then select that website name and click on Delete. 5. To unblock all sites click on Clear All button. 6. After doing necessary changes click on Apply.

Note: This feature will get activated only if you activate the schedule otherwise it wont get affected.
To enable the Schedule: 1. Select Security > Content Filter > Schedule 2. Select Active Everyday to Block to block default all days 3. Select Edit Daily to Block to block on selective days like Monday, Thursday, Sunday, etc. And even you can select the timing for how much duration you want to block those sites. 4. Now click on Apply to save the changes.
Once you block the sites you cant open that sites. If you try to open those sites you will get following warning message