User Manual

Table Of Contents

Introduction...3

About the GuitarFX... 4 GuitarFX Basics.... 4 How to Use This Manual... 6
Important Safety Instructions...7
Important Safety Instructions (English)... 7 Instructions de Scurit Importantes (French). 9 Lesen Sie bitte die folgende Sicherheitshinweise (German). 11 CE Declaration Of Conformity.. 13 FCC Compliance Statement.. 13
Hookup Diagram...14 A Tour of the GuitarFX...15 Selecting Programs...18 Editing Programs...19 Using the Tuner..20 Storing/Copying Programs..22 Deferred Program Change..23 EFFECT Knob Settings...24 Troubleshooting..36 Specifications...37 Warranty/Contact Alesis..38

1 Introduction

Welcome!
Thank you for making the Alesis GuitarFX a part of your setup. Since 1984, we've been designing and building creative tools for the audio community. We believe in our products, because we've heard the results that creative people like you have achieved with them. One of Alesis' goals is to make high-quality music equipment available to everyone, and this user manual is an important part of that. After all, there's no point in making equipment with all kinds of capabilities if no one explains how to use them. So, we try to write our manuals as carefully as we build our products. The goal of this manual is to get you the information you need as quickly as possible, with a minimum of hassle. We hope we've achieved that. If not, please drop us an email and give us your suggestions on how we could improve future editions of this manual. We hope your investment will bring you many years of creative enjoyment and help you achieve your musical goals. Sincerely, The people of Alesis

Introduction

About the GuitarFX
The first thing youll probably notice about the GuitarFX is its sizeits not that much larger or smaller than most other guitar effects pedals. But dont let that fool you. The GuitarFX does much more than most pedals youll find on the market today (and for an unbeatable price too). Weve packed a lot of effects (more than 40!) and features into this unit. Heres a glimpse:

GuitarFX Key Features

80 preset patches that you can fully edit, store and restore to the factory default settings 9 effect modules that provide multiple selectable effects Over 40 different effects with adjustable parameters and innumerable effect combinations Built-in auto-chromatic tuner Battery-powered operation and an external power option (9VDC) Simple interface that gives you quick and easy access to the GuitarFXs features
GuitarFX Basics Benefits of a Multi-Effects Pedal
If youve ever used guitar pedals, you know they come in an infinite array of effects, colors and sizes. If you use multiple pedals, you probably do so by linking them all together into a chain. The GuitarFX eliminates the need for so many pedals because it combines just about all the effects you need into one unit. Instead of turning knobs and pushing buttons on pedal after pedal, with the GuitarFX you have full control over dozens of effects with one foot pedal! Its that easy.

Effect Modules

If you were to think of the GuitarFX as a series of individual pedals linked together, then each pedal in that series would be considered an effect module. The GuitarFX has nine separate effect modules, as shown below:
You can assign one effect to each of these modules and adjust its parameters accordingly. On the face of the unit, youll see a list of possible effect types for some of these modules. For more on effect modules, see chapter 10.

Effect Types

When we use the word effect in this manual, were usually referring to an effect type. Each module provides you with a selection of effect types, only one of which may be chosen for each module. For example, the DIST module allows you to select which type of distortion you want (ACOUSTIC, FDR CLEAN, RHYTHM and others). The behavior of each of these effect types may be adjusted in one or more ways to produce variations of the effect.

Parameters

A parameter is a control that changes the characteristics of an effect. When we use the word parameter, we are referring to the direct control parameter available to the DIST, FX1, FX2 and FX3 modules. DISTs parameter is called DRIVE, and the parameters for FX1, FX2 and FX3 are labeled PARAM. The characteristic controlled by a parameter varies from effect to effect.

Programs

A program is a combination of effects modules and their respective settings. In PLAY mode, you have quick access to the GuitarFXs 80 programs via the foot pedals and the VALUE knob. The programs are divided up into banks A H and are identified by a bank letter and a program number on the display.

How to Use This Manual

This manual is divided into the following sections describing the various functions and applications for the GuitarFX. While it's a good idea to read through the entire manual once carefully, if you already have general knowledge about guitar effects, you should use the table of contents to look up specific functions. Chapter 3: Getting Started shows you how to get the unit connected and turned on. Weve included a hookup diagram and some tips on using the GuitarFX. Chapter 4: A Tour of the GuitarFX describes all the controls and features of the unit. This chapter features diagrams of the top and rear panels that are labeled with the name and a brief overview of each function. The paragraphs that follow the diagrams provide more in-depth discussion of these features. Chapters 5 through 9 include step-by-step instructions for using the GuitarFX, including how to select and edit programs, use the tuner function, store and copy programs, and defer program changes. Chapter 10: Effects Knob Settings explains the units effect modules and types, as well as other settings controlled by the EFFECT and VALUE knobs. Chapter 11: Troubleshooting can give you a hand if youre experiencing problems with the GuitarFX. Youll find that most issues can be resolved simply and quickly. Chapter 12: Specifications is full of information for the more technical users. Chapter 13: Warranty/Contact Alesis explains the warranty we supply with the GuitarFX and lets you know the best way to reach us if you have any questions or comments.
Helpful tips and advice are highlighted in a shaded box like this
When something important appears in the manual, an exclamation mark (like the one shown at left) will appear with some explanatory text. This symbol indicates that this information is vital when operating the GuitarFX.
2 Important Safety Instructions
Important Safety Instructions (English) Safety symbols used in this product
This symbol alerts the user that there are important operating and maintenance instructions in the literature accompanying this unit. This symbol warns the user of uninsulated voltage within the unit that can cause dangerous electric shocks. This symbol warns the user that output connectors contain voltages that can cause dangerous electrical shock.

Please follow these precautions when using this product:
1. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a damp cloth. Do not spray any liquid cleaner onto the faceplate, as this may damage the front panel controls or cause a dangerous condition. 7. Install in accordance with the manufacturer's instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 2. 3. 4. 5. 6.
Important Safety Instructions
10. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Use only attachments or accessories specified by the manufacturer. 12. Use only with a cart, stand, bracket, or table designed for use with professional audio or music equipment. In any installation, make sure that injury or damage will not result from cables pulling on the apparatus and its mounting. If a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tipover. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as when the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. This unit produces heat when operated normally. Operate in a wellventilated area with at least six inches of clearance from peripheral equipment. 16. This product, in combination with an amplifier and headphones or speakers, may be capable of producing sound levels that could cause permanent hearing loss. Do not operate for a long period of time at a high volume level or at a level that is uncomfortable. If you experience any hearing loss or ringing in the ears, you should consult an audiologist. 17. Do not expose the apparatus to dripping or splashing. Do not place objects filled with liquids (flower vases, soft drink cans, coffee cups) on the apparatus. 18. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

Top Panel

Display

This LED display is made up of two digits and two decimal points. In PLAY mode the digits indicate the current bank letter and program number. When you turn the EFFECT knob to a module or parameter, the two digits display the setting of the selection. Descriptions of settings for each mode and parameter are in chapter 10. The Display also contains two decimal points, each to the right of one of the digits. The # decimal point is used by the
When either of the decimal points on the display is flashing, battery power is low and about to run out.

A Tour of the GuitarFX

GuitarFXs tuner to help indicate the pitch of a note youre playing, and the EDITED decimal point lights up when you have changed the settings of the current program. You can read more about these in chapter 6 Editing Programs and chapter 7, Using the Tuner.

EFFECT knob

The EFFECT knob is used for selecting effect modules, parameters and other settings to edit. Around the knob, youll see the names of sixteen different settings, including nine effect modules, four effect parameters (DRIVE and the three PARAMs) and two program-level settings (LEVEL and ROUTE). The PLAY setting is what youll want to be in while playing your guitar through the GuitarFX. Refer to chapter 10 for descriptions of the possible values for the EFFECT knobs settings.

VALUE knob

In PLAY mode, this knob lets you select a program. When you make a selection other than PLAY with the EFFECT knob, you are in edit mode, and the VALUE knob allows you to change the setting of the mode, parameter or global setting you have selected. Also, you can press this knob to store changes you have made to a program.

Foot Pedals

While in PLAY mode, the left foot pedal decrements the program number, and the right foot pedal increments the program number. When you press both pedals together, the GuitarFX goes into bypass mode, in which the audio signal from your guitar simply passes through the GuitarFX without being affected. When you hold both foot pedals down for longer then half a second, the GuitarFX goes into mute mode, in which no signal at all leaves the GuitarFX. When you are in bypass or mute mode, the tuner is activated.

Just turn the EFFECT knob to exit the RESTORE FACTORY PRESETS mode, or turn the unit off and then on again.

7 Using the Tuner

To Tune Your Guitar
1. In PLAY mode, enter BYPASS or MUTE mode by pressing both foot pedals at the same time once (for BYPASS) or by holding them both down for more than half a second (for MUTE). The display will now show tuning information. 2. Make sure your guitar is connected to the GuitarFX, and play the open string you wish to tune. The left digit of the display indicates the pitch nearest that of the open string. If the # decimal point is lit, the note is a sharp. If it is not lit, the note is a natural. Look at the right digit of the display to determine if the pitch is correct. If the top four segments of the digit are rotating clockwise, then the pitch is higher than the pitch shown in the first digit. If the bottom four segments are rotating counterclockwise, the pitch is low. The more the pitch is off, the faster the rotation. If no pitch is detected, youll see a dash in the left digit. Tune the string until an 8 appears in the second digit, indicating that the string is in tune with the pitch displayed in the left digit. The visual guide on the next page shows you what youll see on the display while tuning your guitar.

Using the Tuner

Changing Pitch Reference
If you turn the VALUE knob while using the tuner, the display shows you the setting for the GuitarFXs pitch ) for the A reference, which is set to 440Hz (shown as note above middle C. The possible range of values for this setting is 35 to 45, which represents 435Hz to 445Hz. When you turn the GuitarFX on and off again, the reference pitch is reset to 40.
While you are viewing or editing the pitch reference, the display will return to pitch indication if you do not rotate the encoder for more than two seconds.
8 Storing & Copying Programs

To Store a Program

1. In PLAY or EDIT mode, press the VALUE knob. The display will flash the current program number.
Use the VALUE knob or the foot pedals to select the program number where the current program will be stored. If you want to save it in the same program number, you can skip this step. Press the VALUE knob again to store the program in the selected place. The GuitarFX then returns to the mode it was in before you began the store operation, and the destination program becomes the current program.

To Copy a Program

A copy is just a store of a program that hasnt been modified, so just follow the same steps as you would to store a program.
The store operation times out if you do nothing for more than five seconds. You also can abort the operation by turning the EFFECT knob to a different position.
9 Deferred Program Change
When you switch programs, the GuitarFX normally changes immediately to the program shown on the display. However, in some situationsespecially when playing liveyou may want the ability to scroll through program numbers while remaining in the current program setting. For example, lets say youre soloing in program A3, which gives you strong distortion and fat chorus. If you want to scroll up to program C6 for a clean rhythm sound while you continue playing, youll have to be in deferred program-change mode, which allows you to defer a program change until you confirm it. Heres how:

To Defer Program Change

1. As you turn on the GuitarFX, hold down either foot pedal. Letters will scroll by on the display, spelling the word deferred. While in PLAY mode, step on one of the foot pedals or turn the VALUE knob to change the program number. Youll notice that the GuitarFX remains in the program it was in before you changed the program value. Also, the display will flash the digit that is different from the currently selected program. For example, if you are playing in program D5 and scroll up to program D7, the 7 will flash. If you scroll up to F2, both digits will flash. Once the display shows the program number you desire, to step on both foot pedals at the same time confirm the program change. The display will stop flashing and the GuitarFX will switch to the new program. To return to normal program-change mode, turn off the GuitarFX and turn it back on without holding down either foot pedal.
Deferred programchange mode is especially useful when youre performing and want to switch easily between a rhythm setting and a lead setting as you continue playing.

10 EFFECT Knob Settings

Following are descriptions of each of the effect modules (and other settings of the EFFECT knob), along with their effect types and parameters.

In this setting the display shows you the current program number. This is the mode in which you should be performing, as it allows you to easily switch programs via the foot pedals. Indicates the bank letter and program number of the current program.
COMP/LIMIT (Compressor/Limiter)
Compression evens out the highs and lows of your sound by squeezing them into a thinner range of levels, bringing down the high levels and boosting the lows. Limiting eases only the high levels. Provide increasing levels of compression. Provide increasing limiting. Turns COMP/LIMIT off.

DIST (Distortion)

This setting adds that universal effect that was first used in rock music decades ago and now has become a staple for guitarists in many genres. Acoustic Emulates the sound of an acoustic guitar. Tube Clean Simulates the clean sound of a classic tube amplifier.

EFFECT Knob Settings

Rhythm A slightly distorted sound; great for rhythm playing. Overdrive Provides more grit than the Rhythm setting, like youre really pushing those amplifier tubes. Distortion Adds a crunchiness to your sound. Blues A warm yet slightly crunchy sound associated with some of the blues-guitar greats. Fuzz That classic fuzz distortion effect of the 60s. Just listen and youll see how it got the name. Lead A searing overdrive that will make your solos scream. Metal A heavily overdriven sound with a long sustain; perfect for banging your head. Stack Drive A heavy, driving distortion that sounds like youre playing through a massive tube stack amp. Combo Drive Another heavyweight distortion; sounds like a tube stack amp with a well-defined midrange. Off Turns DIST off.
This is a parameter of the DIST module. Increasing levels of drive/gain for the DIST module. Pedal control of the drive/gain.

EQ (Equalizer)

This setting gives you a 4-band equalizer that you can use to shape the sound of your audio signal by cutting and boosting certain frequencies. Varying levels of cut and boost for low, middle and high audio frequencies broken down as follows: 01 10: Lower values = attenuated highs and emphasized lows 11 20: Lower values = lower emphasized frequency 21 24: Lower values result in emphasized midrange 25: Flat EQ curve 26 30: Higher values = emphasized highs 31 40: Higher values = higher emphasized frequency 41 50: Higher values = emphasized presence and lows Off Turns off the EQ.

NR (Noise Reduction)

This is a combination of two effectshum elimination and noise reduction. Hum elimination works by cutting out the frequency that contains the hum (60Hz). Noise reduction works by gating the signal (muting the signal until its level rises above a certain point). Hum Elimination (Left digit of display) Increasing levels of hum elimination (60Hz harmonic notch filters) Turns off hum elimination Noise Reduction (Right digit of display) Increasing levels of gate threshold. Turns off noise reduction

CAB (Cabinet Simulator)

This module emulates cabinet setups of various sizes. This effect is especially useful if you are plugging your guitar directly into the board instead of using an amplifier.
A single 12 driver cabinet. A 2 x 12 driver cabinet. A 4 x 10 driver cabinet. Off Turns off CAB.
FX1 (Multi-Effect Module 1, Mono to Stereo Effects)
This module gives you a choice of mono effects. You assign one effect at a time to this module. Auto Wah A wah sound controlled by playing intensity. Attack the strings aggressively for more effect. Higher values indicate higher input sensitivity. Pedal-Controlled Wah A wah sound controlled by moving the optional control pedal up and down as you play. Phaser An effect that shifts the phase of the signal and adds it to the original sound (in simpler terms, it adds a duplicate signal that is delayed a bit). The phaser gives your guitar a full, pulsating sound. Higher values result in more feedback, producing a more intense effect. Pedal-Controlled Phaser A phaser effect whose feedback is controlled by the control pedal. Tremolo Varies the volume of the signal, creating a rising and falling effect. Higher values result in greater depth of variation. Pedal-Controlled Tremolo A tremolo effect whose depth is controlled by the control pedal. Ring Modulation An effect that modulates the amplitude of the signal, giving it a metallic sound. Higher values result in greater modulation depth.
Pedal-Controlled Ring Modulation Ring modulation whose depth is controlled by the control pedal. Cry Creates an effect similar to that of a voice box, adding a human-like crying effect to the sound. Higher values result in greater intensity. Pedal-Controlled Cry A cry effect whose intensity is controlled by the control pedal. Random Sample and Hold Step Filter For this effect, the filter cutoff frequency changes abruptly to a new psuedo-random value at a fixed time interval, producing an arpeggiator-like sound. Pedal-Controlled Step Filter A step filter whose depth is controlled by the control pedal. Slow Attack Reduces the attack rate of the signal, slowing the rate at which the volume of the sound rises when you attack a string. Higher values result in higher sensitivity. Auto Pan Pans the signal back and forth from left to right at a constant rate determined by the PARAM setting. Higher values result in increased pan depth. Flanger Shifts the pitch of the signal up and down, creating a swirling effect. Higher values result in longer delay. Pedal-Controlled Flanger A flanger whose delay is controlled by the control pedal. Rotary Speaker Emulates the sound of the classic rotary, creating a Doppler effect similar to that achieved by an organs rotating speaker. Higher values result in greater intensity and pan depth. Pedal-Controlled Rotary Speaker A rotary speaker effect whose intensity and pan depth are controlled by the control pedal.

Chorus Adds fullness to your sound by emulating a chorus of multiple instruments. Higher values indicate greater modulation depth. Pedal Chorus A Chorus effect whose modulation depth is controlled by the control pedal. Pitch Transpose Transposes the pitch of the signal either up or down. P0 P4 transpose the pitch down a minor third, a major third, a perfect fourth and a perfect fifth respectively. P5 P9 transpose the pitch up in the same manner. Variable Pitch Transpose Up Variably transposes the pitch upward from 0 to 2 octaves according to the setting of the direct-control parameter (PARAM) for FX1. Variable Pitch Transpose Down Variably transposes the pitch downward from 0 to 2 octaves according to the setting of the direct-control parameter (PARAM) for FX1. Off Turns off FX1.
PARAM (Direct-Control Parameter for FX1)
This parameter modifies the operation of the effect selected for the FX1 module. Changing between effect types with dissimilar value ranges will scale this value accordingly. For example, if you set Phaser to PARAM=63 and then switch to the Auto Wah effect, its PARAM value will be 12. Changing back to Phaser will result in a PARAM value of 63. Indicates the value of FX1s direct-control parameter, according to the following: For Auto Wah, Phaser, Tremolo, Step Filter, Auto Pan, Flanger and Chorus, indicates the rate of the effect. For Ring Mod, indicates the rate of the modulation.
For Slow Attack, indicates the rate of the attack. For Leslie, indicates the rate of the speaker rotation. For Pedal Pitch Transpose Up and Down, indicates the amount of pitch change in 1/4 semitones (from 1/4 semitone to more than 2 octaves). Wet/dry mix is fixed at 100% wet. For Cry, indicates the sensitivity of the filter modulation For Pitch Transpose with a fixed interval, indicates the wet/dry mix from 0 (100% dry) to 10 (50% wet, 50% dry) to 20 (100% wet). Indicates that the control pedal controls the parameter. Indicates that the effect assigned to the FX1 module does not have a direct-control parameter (for example, Pedal Wah) or that FX1 is off.
FX2 (Multi-Effect Module 2, Stereo Effects)
This module gives you a choice of stereo effects. These effects include all those found in FX1 except for Flanger, Rotary Speaker, Chorus and Pitch Transpose. FX2 also gives you the following additional effect. Auto Phaser A phaser for which the delay is controlled by playing intensity.

PARAM (Direct-Control Parameter for FX2)
These parameters work exactly the same way as the direct-control parameter for FX1, with the following addition. For Auto Phaser, indicates the rate of the effect.
FX3 (Multi-Effect Module 3, Delay-Based Effects)
This module gives you a choice of delay-based effects. A delay is an echo of the original signal that can occur at varying frequency and time. Doubling Doubles the signal with a slight delay, creating the effect of two instruments playing at once. Higher values indicate higher intensity. Pedal Doubling Doubling effect whose intensity is controlled by the control pedal. Ping Pong Delay Creates a delay that bounces back and forth between the right and left sides of the stereo spectrum. Higher values indicate more feedback. Pedal Ping Pong Ping Pong Delay effect whose amount of feedback is controlled by the control pedal. Tape Delay Emulates the retro tape-delay effect that was created by recording a signal to tape and playing it back as a delay. Higher values indicate more feedback. Pedal Tape Delay A Tape Delay effect whose feedback is controlled by the control pedal; great for singling out notes or sections to echo. Stereo Delay A standard delay that occurs in stereo. Higher values indicate more feedback, producing a longer-repeating echo. Pedal Stereo Delay A Stereo Delay effect whose feedback level is controlled by the control pedal. Echo An echo for which higher values indicate a wetter signal and lower values indicate a drier signal. Pedal Echo An echo whose wet/dry mix is controlled by the control pedal.
Hall Reverb Simulates the effect of sound waves bouncing off of the walls of a concert hall. Higher values indicate a wetter mix. Pedal Hall Reverb A Hall Reverb effect whose wet/dry mix is controlled by the control pedal. Room Reverb Simulates the effect of sound waves bouncing off of the walls of a room. Higher values indicate a wetter mix. Pedal Room Reverb A Room Reverb effect whose wet/dry mix is controlled by the control pedal. Reverse Reverb Creates a backwards-playing reverb that you hear immediately before you hear the original signal, instead of after it. Higher values indicate a wetter mix. Pedal Reverse Reverb A Reverse Reverb effect whose wet/dry mix is controlled by the control pedal. Plate Reverb Recreates the classic plate reverb sound achieved by using a metal plate. Higher values indicate a wetter mix. Pedal Plate Reverb A Plate Reverb effect whose wet/dry mix is controlled by the control pedal. Chorus same as in FX1. Pedal Chorus same as in FX1. Flanger same as in FX1. Pedal-Controlled Flanger same as in FX1. Rotary Speaker same as in FX1. Pedal-Controlled Rotary Speaker same as in FX1.

Pitch Transpose same as in FX1. Variable Pitch Transpose Up same as in FX1. Variable Pitch Transpose Down same as in FX1. Off Indicates FX3 is off.
PARAM (Direct-Control Parameter for FX3)
This direct-control parameter works in a similar fashion as the one for FX1. For Doubling, Ping Pong, Tape Delay and Stereo Delay, indicates the length of the delay, up to one second for Tape Delay and up to half a second for the others. For Chorus indicates the rate of the chorus. For Flanger indicates the rate of the flanger. For Leslie, indicates the rate of the speaker rotation. For Pedal Pitch Transpose Up and Down, indicates the amount of pitch change in 1/4 semitones (from 1/4 semitone to more than 2 octaves). Wet/dry mix is fixed at 100% wet. For all reverbs, higher values indicate a longer decay. For fixed-interval Pitch Transpose, indicates the wet/dry mix from 0 (100% dry) to 10 (50% dry, 50% wet) to 20 (100% wet). Indicates that the control pedal controls the parameter. Indicates FX3 is off.
DIGFX (Digital Sampling Effects)
This effect module emulates the effect that different variations of digital sampling can have on an audio signal. Sample Rate Decimation Lower values indicate lower decimation frequency (more decimation, more aliasing). Pedal Sample Rate Decimation A sample rate decimator effect controlled by the control pedal. Bit Reduction Higher values indicate lower resultant bit depth. Pedal Bit Reduction Bit Reduction effect controlled by the control pedal. Off Indicates that DIGFX is off.
In this position, the display shows you the output level of the current program. Level Indicates the program output level in 2dB steps, where 25 is unity gain (0dB). Unity gain is the point at which the level of the output is the same as the level of the input. Pedal-Controlled Level Program level that is controlled by the control pedal.
In this position, the display indicates the current signal routing order of the FX modules. This ordering can have a big effect on your sound, as each effect in the configuration feeds into the next. The LEVEL setting always comes last in line. This is the default order.
This one is the default order with FX2 and FX3 swapped to put the delay effects in the middle of the modulation effects.
This order places the cabinet simulator at the end, allowing it to emulate multiple effects pedals feeding into an amp.
This one is order 2 with FX2 and FX3 swapped.
This order is the default order with the compressor/limiter placed at the end, making this one ideal for recording.

This one is order 4 with FX2 and FX3 swapped.
This is the one to go for if youre recording and want to sound like youre running several effects pedals into an amp.
This configuration is order 6 with FX2 and FX3 swapped.

11 Troubleshooting

Troubleshooting Index
Symptoms Unit does not function (no display or audio). Cause Batteries dead. Incorrect AC adapter. No/incorrect INPUT connection. Solution Replace batteries. Use only Alesis P6 or equivalent. On battery power, the GuitarFX will turn on only when a mono 1/4 plug is inserted into the INPUT jack. Reduce instrument output level. Turn down master volume. Replace batteries. Refer to pages 17 and 20. Change setting. Replace batteries.
Audio distorted, even in BYPASS.
Input level too high. Output level too high. Batteries low.

No sound, level low.

Incorrect input/output connections. Master volume or program level set too low.
Display dim, # or EDITED dot flashing.

Batteries almost dead.

12 Specifications
For the more technical-minded, here are some detailed specifications for the GuitarFX. AUDIO PROCESSING Effect Modules: 9 Programs: 8 banks x 10 Programs = 80 programs, user overwritable, maintained when unit is off, restorable to factory defaults AUDIO PERFORMANCE THD+N: < 0.05% A/D Converter: 20-bit, 64 times oversampling D/A Converter: 20-bit, 128 times oversampling Sample Rate: 31.25kHz AUDIO INPUT Input Connector: Max. Input Level: Input Impedance: 1/4" mono phone jack 7.6dBu 470kOhm
AUDIO OUTPUT Output Connector: 1/4" stereo phone jack Max. Output Level: 1.9dBu w/ 10kHOhm or more load impedance 0.25 dBu w/ 63 Ohm load impedance CONTROL INPUT Input Connector: 1/4" stereo phone jack, Tip = 1.5V, Ring = Input, Sleeve = GND POWER AC Adapter (sold separately): Alesis P6 - 9VDC (center minus), 300mA Batteries: 4 IEC R6 (size AA) batteries Battery Life: Approximately 30 hours continuous operation with high-drain alkaline batteries Dimensions: 7.5 x 5.5 x 1.6 (190mm x 140mm x 41mm) Weight: 15.7oz (445g) without batteries
13 Warranty/Contact Alesis

Alesis Limited Warranty

ALESIS CORPORATION ("ALESIS") warrants this product to be free of defects in material and workmanship for a period of one (1) year for parts and for a period of one (1) year for labor from the date of original retail purchase. This warranty is enforceable only by the original retail purchaser and cannot be transferred or assigned. For the most effective service, the purchaser should register the purchase on the ALESIS website at http://www.alesis.com/support/warranty.htm. During the warranty period, ALESIS shall, at its sole and absolute option, either repair or replace free of charge any product that proves to be defective on inspection by ALESIS or its authorized service representative. In all cases disputes concerning this warranty shall be resolved as prescribed by law. To obtain warranty service, the purchaser must first call or write ALESIS at the address and telephone number available on the Alesis website to obtain a Return Authorization Number and instructions concerning where to return the unit for service. All inquiries must be accompanied by a description of the problem. All authorized returns must be sent to ALESIS or an authorized ALESIS repair facility postage prepaid, insured and properly packaged. Proof of purchase must be presented in the form of a bill of sale, canceled check or some other positive proof that the product is within the warranty period. ALESIS reserves the right to update any unit returned for repair. ALESIS reserves the right to change or improve design of the product at any time without prior notice. This warranty does not cover claims for damage due to abuse, neglect, alteration or attempted repair by unauthorized personnel, and is limited to failures arising during normal use that are due to defects in material or workmanship in the product. THE ABOVE WARRANTIES ARE IN LIEU OF ANY OTHER WARRANTIES OR REPRESENTATIONS WHETHER EXPRESS OR IMPLIED OR OTHERWISE, WITH RESPECT TO THE PRODUCT, AND SPECIFICALLY EXCLUDE ANY IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY OR OTHER IMPLIED WARRANTIES. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. IN NO EVENT WILL ALESIS BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT OR OTHER DAMAGES RESULTING FROM THE BREACH OF ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING, AMONG OTHER THINGS, DAMAGE TO PROPERTY, DAMAGE BASED ON INCONVENIENCE OR ON LOSS OF USE OF THE PRODUCT, AND, TO THE EXTENT PERMITTED BY LAW, DAMAGES FOR PERSONAL INJURY. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. THIS CONTRACT SHALL BE GOVERNED BY THE INTERNAL LAWS OF THE STATE OF CALIFORNIA WITHOUT REFERENCE TO CONFLICTS OF LAWS. This warranty gives you specific legal rights, and you may also have other rights required by law which vary from state to state. This warranty only applies to products sold to purchasers in the United States of America or Canada. The terms of this warranty and any obligations of Alesis under this warranty shall apply only within the country of sale. Without limiting the foregoing, repairs under this warranty shall be made only by a duly authorized Alesis service representative in the country of sale. For warranty information in all other countries please refer to your local distributor.