Flash output

Metz mecablitz 58 AF-2 digital
High max. GN 58 with ISO 100/21 and 105 mm High number of flashes (e.g. 230 full flashes with NiMH rechargeable batteries) Flash cycle time 0.1 4.5 sec. (depending on power supply and flash power)

Basic configuration

Secondary reflector with 2 lighting levels Vertical (-7/+90) and horizontal (300) tilt- and swivel reflector Illuminable Dot-Matrix-LC-display Auto zoom for 24 - 105 mm illumination Integrated wide-angle diffuser for 12 mm illumination Extendible reflector card for soft flash illumination Modelling light (permanent light for checking the photo) Integrated wide-area autofocus measuring beam Flash readiness- and exposure control in LCD display and camera Flash range indicator in LCD Automatic unit switch-off and manual key lock Metal foot with fast lock (not Sony) TTL flash mode Automatic flash mode with 12 partial lighting levels Manual flash mode with 25 partial lighting levels Stroboscope flash mode HSS high speed synchronization 1st and 2nd shutter curtain synchronization Manual flash exposure correction for TTL- or automatic flash mode Automatic fill-in flash Flash bracketing E-TTL- / E-TTL II- flash mode (Canon) i-TTL- / D-TTL- / 3D-flash mode (Nikon) P-TTL- flash mode (Pentax) Four-Thirds-TTL- flash mode (Olympus / Panasonic / Leica) ADI- flash mode (Sony) Camera-specific TTL-remote-mode (master- and slave-mode) Camera-specific Servo flash mode

Basic flash modes

Weight without batteries: Dimensions in mm (W x H x D): 58 AF-2 for Canon 58 AF-2 for Nikon 58 AF-2 for Olympus / Panasonic 58 AF-2 for Pentax 58 AF-2 for Sony
355 g 71 x 148 x 99 No. 00583219A No. 005832493 No. 005832294 No. 005832797 No. 005832692
Camera-specific flash modes

Guaranteed in the future

Firmware update via integrated USB port
Accessories (optional): Power Pack P 76 Set Connecting cable V 58-50 to Power Pack P 76 Mecabounce 58-90 Bounce diffuser 58-23

Power supply

No. No. No. No. 4 x AA alkaline magnesium batteries or lithium batteries 4 x AA NiCad- or NiMH-batteries Powerful Metz NiMH-Power Pack P76 with cable V58-50

Included in delivery

Case, Slave stand and Instruction manual

2010 - Metz MB - PM

Product data sheet; subject alternation

Metz always first class.

The Fascination of Flash Photography
Metz mecablitz Flash units for analog and digital cameras
Metz mecablitz Complete Photo Electronics Catalogue 2010/2011
Metz always first class. www.metz.de

Contents

Into the future with tradition Photo Gallery Product Families
System Flash Units Metz mecablitz 58 AF-2 digital Metz mecablitz 50 AF-1 digital Metz mecablitz 44 AF-1 digital Metz mecablitz 36 AF-5 digital Metz mecablitz 24 AF-1 digital
SCA Flash Units Metz mecablitz 76 MZ-5 digital Metz mecablitz 45 CL-4 digital Metz mecablitz 54 MZ-4i digital
Automatic Flash Units Metz mecablitz 36 C-2 + Metz mecablitz 20 C-2
Slave/servo flash units Metz mecablitz 28 CS-2 digital Metz mecablitz 15 MS-1 digital
Quick Search Technical Data Accessories Technical Dictionary
Into the future with tradition
For decades, Metz has played a leading role in professional flash photography. Its no wonder, because the companys product range is very diverse. Ranging from handy and compact up to powerful handheld flashguns, there is just the right light for any need. The highly-developed SCA adapter system is another Metz strength. It makes it possible for Metz SCA flash units to be used on many cameras. Metz thus successfully manufactures products that stand out due to their versatility, long service life, and quality.

Excellent quality

Metz flash units operated convincingly in many tests. This is the case for light performance as well as reliability and handling. In order to maintain this quality, the Metz plants in Zirndorf near Nuremberg consistently rely on development and production in its German location. Highly-qualified personnel and our own training system, as well as the know-how from decades of development work, combined with demanding quality management (ISO 9001) in all corporate divisions guarantee that the highest demands are met: Metz always first class.

Metz Ideas have a future

Through an entire series of pioneering technical work, the Metz plants have established an excellent reputation over many decades. This is the result of core competences in the areas of electronics and plastics engineering. An entire series of innovations, such as the worlds first
integrated USB port in the mecablitz 58 AF-2 digital, mecablitz 50 AF-1 digital, mecablitz 44 AF-1 digital

Technical perfection

Decades of development experience and production in Germany ensure the high technical standard of Metz devices. The use of high-quality components in connection with the most modern high-tech SMD assembly machines ensure that you can rely on Metz products. Convincing evidence for this is the worldwide marketing of high-quality products, both in the flash sector as well as in ultramodern TV production.
and mecablitz 15 MS-1digital, or the self-learning servo mode of the mecablitz 28 CS-2 digital, are typical examples of this.

Photo Gallery

More fun better pictures
Using a flash pays off: Anyone using additional light when taking a photograph obtains better results, because in post-processing, it isnt possible to obtain missing colors or brilliance from the picture: The methods: Using a flash doesnt only mean flooding a dark subject with light; it also means handling this light in a targeted manner as well as creatively. There are very different methods available to achieve this. It starts with a direct flash of the subject with a flash unit fastened to the camera, and continues with a bounce flash, which is made possible by turning and tilting the reflector head. This way, the light can be redirected either with a special bounce diffuser or with an extendable, integrated reflector card. In addition, there are other flash methods that can be achieved through an off-camera use of the units. Adjusting the flash exposure plays a major role in the effect of a subject. In many Metz flash devices, the amount of light can be controlled variably, and thus balanced entirely according to need. In this way, a lighting mood is never lost. There is even considerable advantage in using a Metz flash in daylight. Shadowed areas or backlight can be brightened optimally in this way, and it enables pictures with undreamed-of sharpness and brilliance. In contrast to bygone eras, flashes and cameras themselves already contribute a great deal to successful exposure. These days, no flash photographer has to spend time on f-stop calculations or use various formulas. Intelligent units have now taken over most of the work. With the help of various special functions, one can concentrate on the essentials, i.e. the picture composition. That way, using a flash is really fun!

Firmware update via integrated USB port 4 x AA alkaline-magnesium or lithium batteries 4 x AA NC or NiMH rechargeable batteries powerful Metz NiMH Power Pack P 76 with V 58-50 cable

Included in delivery

belt case slave mounting foot

Accessories

Power Pack P 76 Set (V58-50 cable required)
Mecabounce 58-90 for softer illumination (Fig. similar)
Bounce diffuser 58-23 for bounce flash
m e c a b l i t z AF - 1 d igi ta l
For committed amateur photographers
High performance and future-proof The successor to the Best Accessory Tipa 2008 award-winning mecablitz 48 AF-1 digital has been launched with a new high quality metal base which allows quick and easy attachment to the respective camera. The mecablitz 50 AF-1 digital has all the right technological features too, including numerous application possibilities and even higher performance levels (guide number 50). Equipped with a USB interface for online firmware updates, its innovative and future-proof credentials are proven. It is available in five versions, each one perfectly tailored to a digital camera by one of the leading manufacturers (Canon, Nikon, Olympus/Panasonic, Pentax or Sony ADI) all of which are rapid response due to their fully automatic flash modes. These permit precise light output tailored to each individual subject. Numerous manual fine tuning options extend your creative photographic freedom. Virtually limitless possibilities are opened up for creative lighting thanks to a fully swivelling reflector system which also contains a flip-out reflector card and a diffuser. The slave function allows the 50 AF-1 digital to be used without constraints. In the respective cameraspecific wireless TTL mode it can even be used as a slave device. With built-in camera flash, wireless applications are available in servo mode. A superb flash unit for committed amateur photographers.
high max. GN of 50 for ISO 100/21 and 105 mm
vertical (-7/+90) and horizontal (300) swivel reflector illuminated LCD display easy operating concept motor zoom for 24 - 105 mm illumination integrated wide-angle diffuser for 12 mm illumination extendible reflector card for soft flash illumination modeling light (permanent light for checking the photo) integrated autofocus measuring flash Flash readiness indicator and correct exposure display on unit and camera (subject to camera) flash range indicator in the LCD display automatic unit switch-off and manual key lock Metal base* with quick lock
TTL flash mode manual flash mode with 8 partial lighting levels HSS high speed synchronization 1st and 2nd shutter curtain synchronization manual flash exposure correction for TTL flash mode automatic fill-in flash flash bracketing

* excludes Sony model

Detail metal base*

USB por t

GN of 50 at ISO 100/21 (105 mm) GN of 36 at ISO 100/21 (50 mm)
E-TTL- / E-TTL-II flash mode E-TTL remote mode (Slave and servo mode)

E-TTL flash mode

i-TTL flash mode
Four Thirds TTL flash mode

P-TTL flash mode

ADI flash mode firmware update possible via Metz Service
4 x AA alkaline-magnesium batteries 4 x AA NC or NiMH rechargeable batteries

Perfect travel companion

The new mecablitz 24 AF-1 digital is perfect when youre on the go. Thanks to the compact, slim-line and lightweight design it can be stashed easily in a jacket pocket and is at hand just when you need it. Currently the smallest Metz system flash unit with GN 24 for ISO 100/21 and 35 mm focal length, it is particularly suited to flash novices who are looking for better illumination in their photos than is possible with an integrated camera flash. Thanks to intelligent TTL camera control the mecablitz 24 AF-1 digital even makes automatic fill-in flash possible. Additional illumination levels are also possible thanks to the 90 adjustable swivel reflector. Flash readiness and exposure levels are displayed on the back of the unit by two LED indicators.
Max guide number 24 for ISO 100/21 and 35 mm
Vertical swivel reflector +90 LED display Integrated autofocus flash metering Flash readiness and correct exposure display on unit and camera (subject to camera)
TTL flash mode First and second shutter curtain synchronisation (subject to camera) Manual flash exposure correction for TTL flash mode (subject to camera) Automatic fill-in flash
Beam for AF flash metering
Swivel reflector (vertical)
GN of 24 at ISO 100/21 (35 mm)

E-TTL flash mode

Four thirds TTL flash mode

ADI flash mode

Firmware update via Metz Service 2 x AA alkaline-magnesium or lithium batteries 2 x AA NC or NiMH rechargeable batteries
The unique special feature of Metz SCA flash units is that one and the same flash unit can be used with different cameras it doesnt matter whether they are digital or analog. By simply replacing the adapter, system cameras from different manufacturers can be used, because they offer the richest array of special functions. Flash units with SCA adapters are just as suitable for system camera owners as for medium-format camera owners. All members of the SCA family meet this criteria, whether it is a handheld flash gun or a compact flash.

A second look

Many wedding photographs are exclusively standard poses. Anyone who comes up with additional ideas here can score bonus points. Why not photograph the bridal couple or wedding guests during small talk? With some flash, the subject is given additional sharpness and brilliance. For this purpose, there are different partial light output levels to choose from with Metz handheld flash guns.

Perfectly-equipped

Tough professional use requires the maximum flash power. The new, practical, high-power Power Pack P 76, which attaches to your belt, provides even more energy. This increases flash output, while simultaneously reducing the flash recycle time. This is a dramatic improvement, which makes it possible to fall back on maximum flash power when taking a battery-draining series of shots.
m e c a b l i t z M Z - 5 d igi ta l

Light power for pros

Powerful handheld flash guns Worldwide, professional photographers put their trust in the powerful 76 MZ-5 digital from Metz. Above all at weddings and fashion shows, its ability to take fast series of shots pays off. Its secondary reflector which makes it possible to set perfect highlights in the eye is worth its weight in gold. It goes without saying that the camera-specific system flash modes of the various manufacturers can also be used perfectly with this professional flash, through different SCA adapters.All menu navigation settings can be activated from the device itself, and a locking function means you wont accidentally change fixed values. Of course, the 76 MZ-5 digital keeps up with the times and provides outstanding flash convenience with a great deal of creative flexibility in setting up shots. Discriminating photographers will appreciate the lasting flash performance ensured by the NiMH rechargeable battery and the Metz charger. It offers considerably more power than the previous NiCad rechargeable battery. The control unit of the 76 MZ-5 digital is specially equipped with a large, illuminated dot matrix display. Plus, the reflector of the zoom flash unit automatically adapts to a focal length range of 24 - 105 mm depending on the type of camera. A wide-angle diffusing disk, included with the flash, enables expansion to 20 mm.
high max. GN of 76 for ISO 100/21 and 105 mm
SCA adapter system (universal flash unit useable with different cameras) secondary reflector with 3 lighting levels vertical (+90) and horizontal (270) tilt reflector control unit with illuminated dot matrix display easy operating concept motor zoom for 24 - 105 mm illumination accompanying wide-angle diffuser for 20 mm illumination modeling light (permanent light for checking the illumination) integrated auto-focus measurement flash in the control section flash readiness and exposure control indicators on the unit and camera (subject to camera) flash range indicator in LCD manual key lock

TTL flash mode automatic flash mode with 12 automatic apertures manual flash mode with 25 partial lighting levels stroboscope mode 1st and 2nd shutter curtain synchronization manual flash exposure correction for TTL or automatic flash mode automatic fill-in flash flash bracketing
Secondar y reflector with 3 selectable light lighting levels
Illuminable dot matrix display
Control unit with LCD display and integrated AF measurement flash

SCA 3002 adapter

GN of 76 at ISO 100/21 (105 mm) GN of 54 at ISO 100/21 (50 mm)
Camera-specific system flash modes with SCA adapters

Canon

E-TTL- / E-TTL-II flash mode
CANON NIKON FUJIfilm HASSELBLAD LEICA MAMIYA OLYMPUS PANASONIC PENTAX ROLLEI SONY

Nikon/Fujifilm

i-TTL / i-TTL-BL- / D-TTL / 3D flash mode

Olympus/Panasonic/Leica

Pentax

Sony alpha

Guaranteed in the future
firmware update possible via Metz Service

Power sources

Metz NiMH rechargeable battery 76-56 (included with flash) powerful Metz NiMH Power Pack P 76 with V 76 cable
standard foot camera bracket NiMH rechargeable batteries charger wide-angle diffuser (20 mm)

Mounting bracket 50-25

Power Pack P 76 Set (V76 cable required)

NiMH charger set B 47

Mecabounce 50-90 for softer illumination
Bounce diffuser 76-23 for bounce flash
m e c a b l i t z C L - 4 d igi ta l B a s ic / K I T

For pros

Great performance: The Metz mecablitz 45 CL-4 digital is a powerful handheld flashgun that is very convincing, due to its GN of 45 for ISO 100/21 and 35 mm focal length, as well as the most modern charging method available. It is an ideal flash unit for photographers who put higher priority on high light output and rapid recycling times, as well as extensive optional features. It is equipped with a secondary reflector in order to be able to create perfect highlights in portraits. It goes without saying that the camera-specific system flash modes of the various manufacturers can also be used perfectly with this professional flash, through various SCA adapters. The TTL mode and the automatic functions can be just as easily set as manual partial lighting, via the practical dial on the top of the 45 CL-4 digital. This flash unit, specially designed for digital cameras, also offers all the important special functions listed above for the 76 MZ-5 digital, including high-speed synchronization (HSS). The reflectors vertical and horizontal tilt and swivel abilities can also be used for indirect flash lighting, just like on the 76 MZ-5 digital. The Power Pack P 76 is available for particularly intensive professional use, which can increase the flash output and further reduce the flash recycle time.

SCA adapter system (flash unit useable with different cameras) secondary reflector vertical (-7/+90) and horizontal (270) tilt reflector illuminated LCD display easy operating concept motor zoom for 24 - 105 mm illumination integrated wide-angle diffuser for 20 mm illumination modeling light (permanent light for checking the photo) integrated autofocus measurement flash flash readiness and exposure control indicators on the unit and camera (subject to camera) flash range indicator in LCD automatic unit switch-off and manual key lock

Standard Flash Modes

TTL flash mode automatic flash mode with 12 automatic apertures manual flash mode with 25 partial lighting levels stroboscope mode HSS high speed synchronization (Canon, Sony, Nikon analog, Leica) 1st and 2nd shutter curtain synchronization manual flash exposure correction for TTL or automatic flash mode automatic fill-in flash flash bracketing
Secondar y reflector with attachable reduction filter
2 function keys, 1 control dial
GN of 54 at ISO 100/21 (105 mm) GN of 40 at ISO 100/21 (50 mm)
ADI flash mode ADI remote mode (slave function)
4 x AA alkaline-magnesium or lithium batteries 4 x AA NC or NiMH rechargeable batteries powerful Metz NiMH Power Pack P 76 with V 54-50 cable
Light reduction filter Bag Standard foot
Power Pack P 76 (V 54-50 connection cable required)
Connecting cable SCA 3008A with SCA 3002 adapters and camera bracket 40-36
SCA 3083 digital slave adapter
Mecabounce 44-90 for softer illumination (Fig. similar)
A u t o m at ic f l a s h u n i t s
The flash units in this family dont have TTL flash mode; instead, they have the so-called automatic flash mode, in addition to manual flash mode. Numerous photographers still make use of this simple but extremely effective form of flash measurement. With automatic flash mode, it isnt the camera that controls the flash, but instead, the photocell integrated in the flash measures the light reflected from the object. It is a really nice thing!

Fill-in flash

Backlighting makes interesting light effects possible, if you know how to use it correctly. A flash should be used in any case. With the flash output reduced by 1 or 2 f-stops, it is possible to retain the character of the existing light. The higher the guide number, the greater the range of the flash unit. However, when comparing, it is important to make sure that the same focal length and the same ISO specification are used.

Long exposure times

It is worth experimenting with exposure times that are longer than the flash sync speed. For moving objects, interesting blurring effects and a corresponding brightening of the foreground can be obtained in a range of approx. 1 second. By the way, the easiest way to extend the range of a flash unit is to increase the ISO setting on the camera. To be set at 1600 ISO instead of 100 thus quadrupling the range of the flash unit.

Side lighting

The slave flash mode is interesting in order to obtain especially varied directed lighting. Completely without a cable (wireless), this method can be used to place and trigger an external flash at any place in the room. In this way, interesting additional lighting can be set, whether in the form of a light accent or a side light, for example. Naturally, multiple slaves can be used at the same time. It is particularly exciting to use this to obtain separate lighting for the subject and the background of the picture.
Slave/servo mode at close range: The Metz macro flash is fixed directly on the subject and creates precise yet creative lighting for close-ups. In addition to which the Metz mecablitz 15 MS-1 digital can also be used in its slave function for effectively brightening up dark areas of the picture.

Creative at close range:

Correct lighting is of particular importance in the macro range. The Metz macro flash 15 MS-1 digital is especially suited for this. Due to its positioning directly on the lens the light cannot fail to reach its destination. With its ring form and completely wireless functionality, the new Metz flash unit is excitingly attractive. Special light accents and a variety of lighting options are also possible thanks to adjustable reflectors. Thus, directed light can be adjusted in terms of contrast and brightness. In the slave mode, the Metz mecablitz 15 MS-1 can also be used to effectively lighten shadowed areas of pictures.
m e c a b l i t z C s - 2 d igi ta l

For the imaginative

Flash with a fun factor: Have you ever been upset due to photographs that are too dark, because the integrated flash in your camera was once again inadequate? Wouldnt you like to have a handy flash unit that can also be used separate from the camera once in a while? Then Metz has the perfect solution for you! Let the curtain rise for the Metz mecablitz 28 CS-2 digital, with technology and a size that have been optimally matched to compact digital cameras. The fun factor is increased by the self-learning servo mode and the smart EASY mode. For the very first time the flash result can be directly manipulated via the immediate correction buttons (+/-). Simply shoot, check the result on the camera screen and adjust straight away as required all at the touch of a button. Thanks to this servo model you can increase your flash power without any undesired side effects. The compact tool draws its power from either universally available alkaline micro batteries or equally competitive rechargeable micro batteries.
max. GN of 28 for ISO 100/21 and 85 mm
Servo mode: flash unit exposure via built-in camera flash or additional external flash unit LCD display flash readiness and exposure control indicator on the unit flash range indicator in the LCD illumination from 24 mm (wide-angle diffuser) up to 85 mm (telephoto attachment) automatic unit switch-off
automatic flash mode with 8 automatic apertures manual flash mode with 4 partial lighting levels Easy Mode: manual exposure correction with +/- buttons

Easy control with the +/- buttons

Clearly laid out display

Perfect for mounting on the integrated, extendible telescopic bracket
GN of 28 at ISO 100/21 (85 mm) GN of 22 at ISO 100/21 (35 mm)
Learning mode: optimum adaptation of the flash unit to the camera-specific pre-flash only once at the beginning Metz-specific TTL remote mode (slave mode) with other Metz flash units as the master
firmware update possible via Metz Service 2 x AAA alkaline-magnesium batteries 2 x AAA NC or NiMH rechargeable batteries
wide-angle diffuser (24 mm) telephoto attachment 85 mm extendible, integrated telescopic bracket to be fastened to the tripod socket of the camera
SUITABLE FOR ALL CAMERAS WITH BUILT-IN FLASH

Special feature

m e c a b l i t z M S - 1 Digi ta l
For those who love attention to detail
Innovation in the macro world! As a wireless macro flash, the Metz mecablitz 15 MS-1 digital has two individually adjustable reflectors. As a result this new ring-shaped macro flash ensures even, precise lighting On the other hand it also enriches creative lighting configuration in the macro range. There are no limits to personal creativity thanks to the individually adjustable reflectors (0- 20) and the associated finely calibrated light-distribution. In this way it is particularly easy to create effective highlights with any subject. This is all achieved with maximum ease because the Metz mecablitz 15 MS-1 digital automatically adjusts its light output by means of wireless TTL*, making it particularly reliable and precise. There is also a clear, dot-matrix display, which makes the mecablitz 15 MS-1 digital even easier to use. If you are looking for even greater scope for creativity, you can use the manual control facility of the new mecablitz 15 MS-1. This enables you to vary the amount of light given off, with six levels of light output. Spacesaving internal (rechargeable) batteries provide efficient power supply. The Metz mecablitz 15 MS-1 digital is compatible with all camera manufacturers (Canon, Nikon, Olympus, Panasonic, Pentax und Sony-Alpha) and naturally, even if the camera has no built-in flash, manual flash mode is possible via sync cable.
High max. guide number of 15 with ISO 100/21 und 50 mm
Two reflector system, individually adjustable (0 , 10 , 20 ) and separately accessible. Ratio (light distribution from left to right) 8:1, 4:1, 2:1, 1:1, 1:2, 1:4, 1:8 DOT matrix display Second shutter curtain synchronisation (subject to camera) Slow synchronisation (SLOW) Autofocus auxiliary light
Wireless servo flash mode with/without pre-flash suppression Servo mode with learning function Manual flash mode (operation via sync socket/servo)

*For TTL operation in the remote mode, you need a master flash unit. Depending on the camera manufacturer or camera model, the TTL specific master function has an integrated or external flash, as the Metz 58 AF-1 or the Metz 58 AF-2. More details at www.metz.de

Dot-matrix display

Wireless TTL flashes

3-stage swivel reflector

Bouncer disk included makes for softer lighting.
GN of 15 at ISO 100/21 (50 mm)
Camera-specific flash modes
Wireless TTL flash control, remote slave mode available for:
E-TTL / E-TTL II flash mode

Olympus

RC system

DSLR remote flash mode

Firmware update via integrated USB socket Integrated power supply via 2 x AAA (micro) alkaline magnesium batteries (1.5V) 2xAAA (Micro) NiMH/NC rechargeable batteries (1.2V) 2xAAA (micro) lithium batteries (1.5V)

Accessories included

Bounce diffuser Adapter ring 52 mm, 55 mm, 58 mm IR filter bracket Belt pouch
Bouncer dif fuser (included)
Adapter rings (52, 55, 58mm) and IR brackets (included)

Belt pouch (included)

Adapter rings (62, 67, 72mm) (optional extra)
* With respective remote slave operation

Q u ick s e a r c h

CANON Analog EOS cameras (except EOS 300X) Digital cameras NIKON Analog AF-SLR cameras Digital cameras FUJIFILM S7000, S9500, S9600, S100FS, S200EXR, HS10 HASSELBLAD 6x6 LEICA R4, R4s, R5, R6, R6.2, R7, RE MAMIYA 645 Pro TL OLYMPUS C-770, C-8080, SP-350, SP-570 UZ, E-Serie, Pen E-P1, Pen E-P2, Pen E-PL1 PANASONIC DMC-FZ20, DMC-FZ30 PENTAX DSLR ROLLEI 2,8GX, 6008 SAMSUNG GX-10, GX-1L, GX-1S, GX-20 SONY Alpha SCA 3302 SCA 3302 SCA 3302 + SCA 3045 SCA 3702 SCA 3702 SCA 3702 + SCA AF, Hy6 SCA 356 + SCA 300 D SCA 3562 SCA 356 SCA 3562 SCA 356 + SCA 300 A SCA 3562 + SCA 3045 SCA 3702 SCA 3702 SCA 3702 + SCA 3045 DMC-LC 1 DMC-FZ50, DMC-L1, DMC-L10, DMC-LX3, DMC-G1, DMC-GH1, DMC-G10, DMC-GSCA 3502 SCA 3202 SCA 300A + SCA 301 SCA 3502 M5 SCA 3202 SCA 300A + SCA 301 SCA 3502 M5 + SCA 3045 SCA 3202 + SCA 3045 SCA 3202 SCA 3202 SCA 3202 + SCA AF, ZD SCA 396 + SCA 300 E + 50-35 SCA 3952 SCA 396 SCA 3952 SCA 396 SCA 3952 + SCA 3045 R8, R9, M6 TTL, M7, M8, Digilux 2, CM, M8.2, M9 Digilux 1 Digilux 3, V-Lux 1, D-Lux 4 SCA 351 SCA SCA 3202 SCA 351 SCA 3502 SCA 300A + SCA 301 SCA 3202 SCA 351 + SCA 300 A SCA 3502 + SCA 3045 SCA 300A + SCA 301 SCA 3202 + SCA 3045 H1, H2, H3, H4 SCA 390 SCA 3902 SCA 390 SCA 3902 SCA 390 + SCA 300 A SCA 3902 + SCA 3045 S1 Pro, S2 Pro, S5 Pro S3 Pro 301 SCA 3402 SCA 3402 SCA 300A + SCA 301 SCA 3402 SCA 3402 SCA 300A + SCA 301 SCA 3402 + SCA 3045 SCA 3402 + SCA 3045 (except F6) F6 DSLR (except D100, D1x, D2x, D2h) D100, D1x, D2x, D2h Coolpix 8400, 8800, P5000, P5100 SCA 3402 SCA 3402 SCA 3402 SCA 3402 SCA 3402 SCA 3402 SCA 3402 SCA 3402 SCA 3402 SCA 3402 SCA 3402 + SCA 3045 SCA 3402 + SCA 3045 SCA 3402 + SCA 3045 SCA 3402 + SCA 3045 SCA 3402 + SCA 3045 DSLR Power Shot G6, G7, G9, S5 IS, G10, G11, SX1 IS, SX10 IS, SX20 IS SCA 3102 SCA 3102 SCA 3102 SCA 3102 SCA 3102 SCA 3102 SCA 3102 + SCA 3045 SCA 3102 + SCA 3045 SCA 3102 + SCA 3045

24 AF-1 digital

45 CL-4 digital BASIC / KIT
Configuration features: System flash modes Cannon E-TTL- / E-TTL-II flash mode Canon FE flash exposure memory for E-TTL and E-TTL-II flash mode Canon E-TTL remote flash system as master/controller/slave Leica group number control (GNC) Nikon 3D multi-sensor fill-in flash mode Nikon D-TTL / 3D flash mode
Nikon FV flash exposure memory for i-TTL and i-TTL-BL flash mode

/ / /

/ / /

/ /

// // //
Nikon i-TTL / i-TTL-BL flash mode Nikon matrix controlled fill-in flash mode Nikon underexposure warning in EV (f-stops) Nikon i-TTL remote flash system as master/controller/slave Olympus/Panasonic/Leica Four Thirds System (TTL compatible) Olympus Four Thirds System TTL remote flash system (RC mode) Pentax/Samsung contrast control Pentax/Samsung P-TTL flash mode Pentax Spot-beam mode Pentax/Samsung P-TTL remote flash system as master/controller/slave Sony DSLR-ADI flash control Sony DSLR multi-zone flash measurement (TTL pre-flash measurement)
Sony DSLR remote flash system as master/controller/slave (CTRL/CTRL+ operation)

/ /

Guaranteed in the future Firmware update via Metz Service Firmware update via USB port Power supply Runs on alkaline-magnesium batteries (1.5 V)
Runs on NC rechargeable batteries or NiMH rechargeable batteries (1.2 V)

240 430

Runs on lithium batteries (1.5 V) Runs on Metz NiMH rechargeable battery pack External energy supply with Metz Power Pack P 76 Number of flashes (at full light output) Running on alkaline-magnesium batteries (1.5 V) Running on NiMH rechargeable batteries (1.2 V/2100 mAh) Running on lithium batteries (1.5 V) Running on Metz NiMH rechargeable battery pack (1600 mAh) External energy supply with Metz Power Pack P 76 Flash cycle time in sec. (min./max.) Running on alkaline-magnesium batteries (1.5 V)
Running on NiMH rechargeable batteries (1.2 V)

250 320

450 460

100 5) 140 5) 175 5)

200 250

150 190

140 5) 200 5) 250 5)

160 350

0,1/4 0,1/4,5 0,1/6 0,1/3,5 0,1/3 0,1/4,5 0,1/5 0,1/3,5 0,1/3 0,1/4,5 0,1/10 0,1/3,5 0,1/4 0,1/4 0,1/4

0,1/2,5 0,1/2,5

0,3/3 0,3/3

0,3/5 0,3/5 0,3/5

D D-TTL Modern further development of the TTL flash control with measurement pre-flash technique for Nikon cameras. 3D and D-TTL-3D For the 3D-TTL (Nikon) and D-TTL-3D flash control, additional data such as the distance to the subject, for example, is taken into consideration in the flash exposure.
Guide number (GN) The guide number is the code number for the light output of a flash unit. It is dependent on the set light sensitivity ISO and (for zoom reflectors) on the reflector position, as well as on any reflector attachments that may be in use (e.g. wideangle or telephoto lens cover). For high speed synchronization (HSS), the guide number is dependent on the shutter speed as well.
Manual zoom The zoom position of the main reflector and thus the illumination of the flash unit can be adjusted manually to the lens focal length. Metal stand High quality metal base for secure attachment on camera shoe.
Modeling light Modeling light is a stroboscope light with a high flash frequency lasting a few seconds. With this quasi permanent light, the light dispersion and shadow formation at the subject can be checked before taking the photograph. Motor zoom The zoom position of the main reflector and hence the illumination of the flash unit can be adjusted automatically to the lens focal length. P Partial light mode Manual flash mode with unregulated light output. By setting partial light mode on the flash unit, the light output or illumination duration of the flash unit can be adapted specifically to the photographic situation.
S SCA 3002 adapter system For system cameras with digital or analog data transmission between the camera and flash unit. By using an SCA adapter from the SCA 3002 system, there are numerous additional system flash functions available with flash units from the SCA 3002 system, depending on the type of camera. The firmware of an SCA adapter from the SCA 3002 system is updateable via Metz service for future cameras. The SCA 3002 adapters are an updated version of the SCA 3000 system. SCA 300 adapter system For system cameras for adaptation to flash units of the SCA 3002 or SCA 300 system. Depending on the type of camera, not all system flash functions are supported by the SCA 300 system. Secondary reflectorr

Metz Quality made in Germany Core competencies in the fields of consumer electronics, photo electronics, and plastics engineering form the basis of the excellent worldwide reputation of Metz-Werke.
Your authorised Metz dealer
Metz-Werke GmbH & Co KG P. O. Box 1267 D-90506 Zirndorf/Germany Fon: +49 (0) 911 - 97060 Fax: +49 (0) 911 - 9706340 www.metz.de info@metz.de Subject to delivery options and changes. P135XGB Printed in Germany 8/2010
Metz immer erstklassig always first class.